diff options
Diffstat (limited to 'drivers/net/tulip')
| -rw-r--r-- | drivers/net/tulip/de2104x.c | 9 | ||||
| -rw-r--r-- | drivers/net/tulip/de4x5.c | 10 | ||||
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 2 | ||||
| -rw-r--r-- | drivers/net/tulip/eeprom.c | 2 | ||||
| -rw-r--r-- | drivers/net/tulip/uli526x.c | 6 |
5 files changed, 13 insertions, 16 deletions
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index b13c6b040be3..46d5a1b15036 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1518,18 +1518,17 @@ static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd) switch (de->media_type) { case DE_MEDIA_AUI: ecmd->port = PORT_AUI; - ecmd->speed = 5; break; case DE_MEDIA_BNC: ecmd->port = PORT_BNC; - ecmd->speed = 2; break; default: ecmd->port = PORT_TP; - ecmd->speed = SPEED_10; break; } + ethtool_cmd_speed_set(ecmd, 10); + if (dr32(MacMode) & FullDuplex) ecmd->duplex = DUPLEX_FULL; else @@ -1550,9 +1549,7 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd) u32 new_media; unsigned int media_lock; - if (ecmd->speed != SPEED_10 && ecmd->speed != 5 && ecmd->speed != 2) - return -EINVAL; - if (de->de21040 && ecmd->speed == 2) + if (ethtool_cmd_speed(ecmd) != 10) return -EINVAL; if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) return -EINVAL; diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 4dbd493b996b..45144d5bd11b 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -79,7 +79,7 @@ every usable DECchip board, I pinched Donald's 'next_module' field to link my modules together. - Upto 15 EISA cards can be supported under this driver, limited primarily + Up to 15 EISA cards can be supported under this driver, limited primarily by the available IRQ lines. I have checked different configurations of multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a problem yet (provided you have at least depca.c v0.38) ... @@ -517,7 +517,7 @@ struct mii_phy { u_int mci; /* 21142 MII Connector Interrupt info */ }; -#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */ +#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */ struct sia_phy { u_char mc; /* Media Code */ @@ -1436,7 +1436,7 @@ de4x5_sw_reset(struct net_device *dev) /* Poll for setup frame completion (adapter interrupts are disabled now) */ - for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */ + for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */ mdelay(1); if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; } @@ -1995,7 +1995,7 @@ SetMulticastFilter(struct net_device *dev) static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; -static int __init de4x5_eisa_probe (struct device *gendev) +static int __devinit de4x5_eisa_probe (struct device *gendev) { struct eisa_device *edev; u_long iobase; @@ -2097,7 +2097,7 @@ static int __devexit de4x5_eisa_remove (struct device *device) return 0; } -static struct eisa_device_id de4x5_eisa_ids[] = { +static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = { { "DEC4250", 0 }, /* 0 is the board name index... */ { "" } }; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 7064e035757a..fb07f48910ae 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -1224,7 +1224,7 @@ static void dmfe_timer(unsigned long data) /* If chip reports that link is failed it could be because external - PHY link status pin is not conected correctly to chip + PHY link status pin is not connected correctly to chip To be sure ask PHY too. */ diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 3031ed9c4a1a..296486bf0956 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -115,7 +115,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) 0x02, /* phy reset sequence length */ 0x01, 0x00, /* phy reset sequence */ 0x00, 0x78, /* media capabilities */ - 0x00, 0xe0, /* nway advertisment */ + 0x00, 0xe0, /* nway advertisement */ 0x00, 0x05, /* fdx bit map */ 0x00, 0x06 /* ttm bit map */ }; diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index 74217dbf0143..a4375c406b5f 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -945,12 +945,12 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) ecmd->transceiver = XCVR_EXTERNAL; - ecmd->speed = 10; + ethtool_cmd_speed_set(ecmd, SPEED_10); ecmd->duplex = DUPLEX_HALF; if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) { - ecmd->speed = 100; + ethtool_cmd_speed_set(ecmd, SPEED_100); } if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) { @@ -958,7 +958,7 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) } if(db->link_failed) { - ecmd->speed = -1; + ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1; } |