diff options
Diffstat (limited to 'drivers/net/usb/sr9800.c')
| -rw-r--r-- | drivers/net/usb/sr9800.c | 874 |
1 files changed, 874 insertions, 0 deletions
diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c new file mode 100644 index 000000000000..b94a0fbb8b3b --- /dev/null +++ b/drivers/net/usb/sr9800.c @@ -0,0 +1,874 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * Based on asix_common.c, asix_devices.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied.* + */ + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/usbnet.h> +#include <linux/slab.h> +#include <linux/if_vlan.h> + +#include "sr9800.h" + +static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static void +sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data, + size); +} + +static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + /* This check is no longer done by usbnet */ + if (skb->len < dev->net->hard_header_len) + return 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *sr_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "%s : Bad Header Length\n", + __func__); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "%s : Bad RX Length %d\n", + __func__, size); + return 0; + } + sr_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!sr_skb) + return 0; + + skb_put(sr_skb, size); + memcpy(sr_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, sr_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__, + skb->len); + return 0; + } + + return 1; +} + +static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 padbytes = 0xffff0000; + u32 packet_len; + int padlen; + + padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4; + + if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { + if ((headroom < 4) || (tailroom < padlen)) { + skb->data = memmove(skb->head + 4, skb->data, + skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + skb_push(skb, 4); + packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + + return skb; +} + +static void sr_status(struct usbnet *dev, struct urb *urb) +{ + struct sr9800_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + usbnet_link_change(dev, link, 1); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } + + return; +} + +static inline int sr_set_sw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +static inline int sr_set_hw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +static inline int sr_get_phy_addr(struct usbnet *dev) +{ + u8 buf[2]; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf); + if (ret < 0) { + netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n", + __func__, ret); + goto out; + } + netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__, + *((__le16 *)buf)); + + ret = buf[1]; + +out: + return ret; +} + +static int sr_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset:%02x\n", + ret); + + return ret; +} + +static u16 sr_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register:%02x\n", + ret); + goto out; + } + + ret = le16_to_cpu(v); +out: + return ret; +} + +static int sr_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write RX_CTL mode to 0x%04x:%02x\n", + mode, ret); + + return ret; +} + +static u16 sr_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, + "Error reading Medium Status register:%02x\n", ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); +} + +static int sr_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write Medium Mode mode to 0x%04x:%02x\n", + mode, ret); + return ret; +} + +static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value); + ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n", + value, ret); + if (sleep) + msleep(sleep); + + return ret; +} + +/* SR9800 have a 16-bit RX_CTL value */ +static void sr_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + u16 rx_ctl = SR_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= SR_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > SR_MAX_MCAST) { + rx_ctl |= SR_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later + */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0, + SR_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= SR_RX_CTL_AM; + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int sr_mdio_read(struct net_device *net, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res; + + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__, + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void +sr_mdio_write(struct net_device *net, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__, + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 sr_get_phyid(struct usbnet *dev) +{ + int phy_reg; + u32 phy_id; + int i; + + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) + return 0; + + phy_id = (phy_reg & 0xffff) << 16; + + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; +} + +static void +sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & SR_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & SR_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +static int +sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= SR_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= SR_MONITOR_MAGIC; + + if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +static int sr_get_eeprom_len(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + return data->eeprom_len; +} + +static int sr_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + __le16 *ebuf = (__le16 *)data; + int ret; + int i; + + /* Crude hack to ensure that we don't overwrite memory + * if an odd length is supplied + */ + if (eeprom->len % 2) + return -EINVAL; + + eeprom->magic = SR_EEPROM_MAGIC; + + /* sr9800 returns 2 bytes from eeprom on read */ + for (i = 0; i < eeprom->len / 2; i++) { + ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i, + 0, 2, &ebuf[i]); + if (ret < 0) + return -EINVAL; + } + return 0; +} + +static void sr_get_drvinfo(struct net_device *net, + struct ethtool_drvinfo *info) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + info->eedump_len = data->eeprom_len; +} + +static u32 sr_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static int sr_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later + */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} + +static const struct ethtool_ops sr9800_ethtool_ops = { + .get_drvinfo = sr_get_drvinfo, + .get_link = sr_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = sr_get_wol, + .set_wol = sr_set_wol, + .get_eeprom_len = sr_get_eeprom_len, + .get_eeprom = sr_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int sr9800_link_reset(struct usbnet *dev) +{ + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + u16 mode; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = SR9800_MEDIUM_DEFAULT; + + if (ethtool_cmd_speed(&ecmd) != SPEED_100) + mode &= ~SR_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~SR_MEDIUM_FD; + + netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n", + __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + sr_write_medium_mode(dev, mode); + + return 0; +} + + +static int sr9800_set_default_mode(struct usbnet *dev) +{ + u16 rx_ctl; + int ret; + + sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT); + if (ret < 0) + goto out; + + ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012, + SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT, + SR9800_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = sr_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n", + rx_ctl); + + return 0; +out: + return ret; +} + +static int sr9800_reset(struct usbnet *dev) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl; + + ret = sr_write_gpio(dev, + SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5); + if (ret < 0) + goto out; + + embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + goto out; + } + + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) + goto out; + + msleep(150); + + if (embd_phy) { + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) + goto out; + } else { + ret = sr_sw_reset(dev, SR_SWRESET_PRTE); + if (ret < 0) + goto out; + } + + msleep(150); + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + ret = sr_sw_reset(dev, SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + return 0; + +out: + return ret; +} + +static const struct net_device_ops sr9800_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = sr_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = sr_ioctl, + .ndo_set_rx_mode = sr_set_multicast, +}; + +static int sr9800_phy_powerup(struct usbnet *dev) +{ + int ret; + + /* set the embedded Ethernet PHY in power-down state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to power down PHY : %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + msleep(600); + + /* set the embedded Ethernet PHY in reset state */ + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) { + netdev_err(dev->net, "Failed to power up PHY: %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + + return 0; +} + +static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + u16 led01_mux, led23_mux; + int ret, embd_phy; + u32 phyid; + u16 rx_ctl; + + data->eeprom_len = SR9800_EEPROM_LEN; + + usbnet_get_endpoints(dev, intf); + + /* LED Setting Rule : + * AABB:CCDD + * AA : MFA0(LED0) + * BB : MFA1(LED1) + * CC : MFA2(LED2), Reserved for SR9800 + * DD : MFA3(LED3), Reserved for SR9800 + */ + led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK; + led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE; + ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "set LINK LED failed : %d\n", ret); + goto out; + } + + /* Get the MAC address */ + ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, + dev->net->dev_addr); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); + return ret; + } + netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = sr_mdio_read; + dev->mii.mdio_write = sr_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = sr_get_phy_addr(dev); + + dev->net->netdev_ops = &sr9800_netdev_ops; + dev->net->ethtool_ops = &sr9800_ethtool_ops; + + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + /* Reset the PHY to normal operation mode */ + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + return ret; + } + + /* Init PHY routine */ + ret = sr9800_phy_powerup(dev); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = sr_get_phyid(dev); + netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); + + /* medium mode setting */ + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + if (dev->udev->speed == USB_SPEED_HIGH) { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size; + } else { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size; + } + netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__, + dev->rx_urb_size); + return 0; + +out: + return ret; +} + +static const struct driver_info sr9800_driver_info = { + .description = "CoreChip SR9800 USB 2.0 Ethernet", + .bind = sr9800_bind, + .status = sr_status, + .link_reset = sr9800_link_reset, + .reset = sr9800_reset, + .flags = DRIVER_FLAG, + .rx_fixup = sr_rx_fixup, + .tx_fixup = sr_tx_fixup, +}; + +static const struct usb_device_id products[] = { + { + USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */ + .driver_info = (unsigned long) &sr9800_driver_info, + }, + {}, /* END */ +}; + +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver sr_driver = { + .name = DRIVER_NAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, + .supports_autosuspend = 1, +}; + +module_usb_driver(sr_driver); + +MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com"); +MODULE_LICENSE("GPL"); |