summaryrefslogtreecommitdiff
path: root/drivers/net/via-rhine.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/via-rhine.c')
-rw-r--r--drivers/net/via-rhine.c90
1 files changed, 77 insertions, 13 deletions
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index d3d0ec970318..ae971080e2e4 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -30,8 +30,8 @@
*/
#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.4.0"
-#define DRV_RELDATE "June-27-2006"
+#define DRV_VERSION "1.4.1"
+#define DRV_RELDATE "July-24-2006"
/* A few user-configurable values.
@@ -44,6 +44,10 @@ static int max_interrupt_work = 20;
Setting to > 1518 effectively disables this feature. */
static int rx_copybreak;
+/* Work-around for broken BIOSes: they are unable to get the chip back out of
+ power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
+static int avoid_D3;
+
/*
* In case you are looking for 'options[]' or 'full_duplex[]', they
* are gone. Use ethtool(8) instead.
@@ -63,7 +67,11 @@ static const int multicast_filter_limit = 32;
There are no ill effects from too-large receive rings. */
#define TX_RING_SIZE 16
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
+#ifdef CONFIG_VIA_RHINE_NAPI
+#define RX_RING_SIZE 64
+#else
#define RX_RING_SIZE 16
+#endif
/* Operational parameters that usually are not changed. */
@@ -116,9 +124,11 @@ MODULE_LICENSE("GPL");
module_param(max_interrupt_work, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
+module_param(avoid_D3, bool, 0);
MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
/*
Theory of Operation
@@ -396,7 +406,7 @@ static void rhine_tx_timeout(struct net_device *dev);
static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void rhine_tx(struct net_device *dev);
-static void rhine_rx(struct net_device *dev);
+static int rhine_rx(struct net_device *dev, int limit);
static void rhine_error(struct net_device *dev, int intr_status);
static void rhine_set_rx_mode(struct net_device *dev);
static struct net_device_stats *rhine_get_stats(struct net_device *dev);
@@ -564,6 +574,32 @@ static void rhine_poll(struct net_device *dev)
}
#endif
+#ifdef CONFIG_VIA_RHINE_NAPI
+static int rhine_napipoll(struct net_device *dev, int *budget)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int done, limit = min(dev->quota, *budget);
+
+ done = rhine_rx(dev, limit);
+ *budget -= done;
+ dev->quota -= done;
+
+ if (done < limit) {
+ netif_rx_complete(dev);
+
+ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+ return 0;
+ }
+ else
+ return 1;
+}
+#endif
+
static void rhine_hw_init(struct net_device *dev, long pioaddr)
{
struct rhine_private *rp = netdev_priv(dev);
@@ -744,6 +780,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = rhine_poll;
#endif
+#ifdef CONFIG_VIA_RHINE_NAPI
+ dev->poll = rhine_napipoll;
+ dev->weight = 64;
+#endif
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
@@ -789,6 +829,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
}
}
rp->mii_if.phy_id = phy_id;
+ if (debug > 1 && avoid_D3)
+ printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
+ dev->name);
return 0;
@@ -1014,6 +1057,8 @@ static void init_registers(struct net_device *dev)
rhine_set_rx_mode(dev);
+ netif_poll_enable(dev);
+
/* Enable interrupts by setting the interrupt mask. */
iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
@@ -1268,8 +1313,18 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *
dev->name, intr_status);
if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
- IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf))
- rhine_rx(dev);
+ IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
+#ifdef CONFIG_VIA_RHINE_NAPI
+ iowrite16(IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+
+ netif_rx_schedule(dev);
+#else
+ rhine_rx(dev, RX_RING_SIZE);
+#endif
+ }
if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
if (intr_status & IntrTxErrSummary) {
@@ -1367,13 +1422,12 @@ static void rhine_tx(struct net_device *dev)
spin_unlock(&rp->lock);
}
-/* This routine is logically part of the interrupt handler, but isolated
- for clarity and better register allocation. */
-static void rhine_rx(struct net_device *dev)
+/* Process up to limit frames from receive ring */
+static int rhine_rx(struct net_device *dev, int limit)
{
struct rhine_private *rp = netdev_priv(dev);
+ int count;
int entry = rp->cur_rx % RX_RING_SIZE;
- int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx;
if (debug > 4) {
printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
@@ -1382,16 +1436,18 @@ static void rhine_rx(struct net_device *dev)
}
/* If EOP is set on the next entry, it's a new packet. Send it up. */
- while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) {
+ for (count = 0; count < limit; ++count) {
struct rx_desc *desc = rp->rx_head_desc;
u32 desc_status = le32_to_cpu(desc->rx_status);
int data_size = desc_status >> 16;
+ if (desc_status & DescOwn)
+ break;
+
if (debug > 4)
printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
desc_status);
- if (--boguscnt < 0)
- break;
+
if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
if ((desc_status & RxWholePkt) != RxWholePkt) {
printk(KERN_WARNING "%s: Oversized Ethernet "
@@ -1460,7 +1516,11 @@ static void rhine_rx(struct net_device *dev)
PCI_DMA_FROMDEVICE);
}
skb->protocol = eth_type_trans(skb, dev);
+#ifdef CONFIG_VIA_RHINE_NAPI
+ netif_receive_skb(skb);
+#else
netif_rx(skb);
+#endif
dev->last_rx = jiffies;
rp->stats.rx_bytes += pkt_len;
rp->stats.rx_packets++;
@@ -1487,6 +1547,8 @@ static void rhine_rx(struct net_device *dev)
}
rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
}
+
+ return count;
}
/*
@@ -1776,6 +1838,7 @@ static int rhine_close(struct net_device *dev)
spin_lock_irq(&rp->lock);
netif_stop_queue(dev);
+ netif_poll_disable(dev);
if (debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard, "
@@ -1857,7 +1920,8 @@ static void rhine_shutdown (struct pci_dev *pdev)
}
/* Hit power state D3 (sleep) */
- iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
+ if (!avoid_D3)
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
/* TODO: Check use of pci_enable_wake() */