diff options
Diffstat (limited to 'drivers/net/wan/hostess_sv11.c')
-rw-r--r-- | drivers/net/wan/hostess_sv11.c | 382 |
1 files changed, 154 insertions, 228 deletions
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index f3065d3473fd..e299313f828a 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -16,6 +16,8 @@ * touching control registers. * * Port B isnt wired (why - beats me) + * + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl> */ #include <linux/module.h> @@ -26,6 +28,7 @@ #include <linux/netdevice.h> #include <linux/if_arp.h> #include <linux/delay.h> +#include <linux/hdlc.h> #include <linux/ioport.h> #include <net/arp.h> @@ -33,34 +36,31 @@ #include <asm/io.h> #include <asm/dma.h> #include <asm/byteorder.h> -#include <net/syncppp.h> #include "z85230.h" static int dma; -struct sv11_device -{ - void *if_ptr; /* General purpose pointer (used by SPPP) */ - struct z8530_dev sync; - struct ppp_device netdev; -}; - /* * Network driver support routines */ +static inline struct z8530_dev* dev_to_sv(struct net_device *dev) +{ + return (struct z8530_dev *)dev_to_hdlc(dev)->priv; +} + /* - * Frame receive. Simple for our card as we do sync ppp and there + * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ - + static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ - skb_trim(skb, skb->len-2); - skb->protocol=__constant_htons(ETH_P_WAN_PPP); + skb_trim(skb, skb->len - 2); + skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); - skb->dev=c->netdevice; + skb->dev = c->netdevice; /* * Send it to the PPP layer. We don't have time to process * it right now. @@ -68,56 +68,51 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) netif_rx(skb); c->netdevice->last_rx = jiffies; } - + /* * We've been placed in the UP state - */ - + */ + static int hostess_open(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); int err = -1; - + /* * Link layer up */ - switch(dma) - { + switch (dma) { case 0: - err=z8530_sync_open(d, &sv11->sync.chanA); + err = z8530_sync_open(d, &sv11->chanA); break; case 1: - err=z8530_sync_dma_open(d, &sv11->sync.chanA); + err = z8530_sync_dma_open(d, &sv11->chanA); break; case 2: - err=z8530_sync_txdma_open(d, &sv11->sync.chanA); + err = z8530_sync_txdma_open(d, &sv11->chanA); break; } - - if(err) + + if (err) return err; - /* - * Begin PPP - */ - err=sppp_open(d); - if(err) - { - switch(dma) - { + + err = hdlc_open(d); + if (err) { + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; - } + } return err; } - sv11->sync.chanA.rx_function=hostess_input; - + sv11->chanA.rx_function = hostess_input; + /* * Go go go */ @@ -128,30 +123,24 @@ static int hostess_open(struct net_device *d) static int hostess_close(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); /* * Discard new frames */ - sv11->sync.chanA.rx_function=z8530_null_rx; - /* - * PPP off - */ - sppp_close(d); - /* - * Link layer down - */ + sv11->chanA.rx_function = z8530_null_rx; + + hdlc_close(d); netif_stop_queue(d); - - switch(dma) - { + + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; } return 0; @@ -159,232 +148,174 @@ static int hostess_close(struct net_device *d) static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { - /* struct sv11_device *sv11=d->ml_priv; - z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */ - return sppp_do_ioctl(d, ifr,cmd); -} - -static struct net_device_stats *hostess_get_stats(struct net_device *d) -{ - struct sv11_device *sv11=d->ml_priv; - if(sv11) - return z8530_get_stats(&sv11->sync.chanA); - else - return NULL; + /* struct z8530_dev *sv11=dev_to_sv(d); + z8530_ioctl(d,&sv11->chanA,ifr,cmd) */ + return hdlc_ioctl(d, ifr, cmd); } /* - * Passed PPP frames, fire them downwind. + * Passed network frames, fire them downwind. */ - + static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; - return z8530_queue_xmit(&sv11->sync.chanA, skb); + return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb); } -static int hostess_neigh_setup(struct neighbour *n) +static int hostess_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - if (n->nud_state == NUD_NONE) { - n->ops = &arp_broken_ops; - n->output = n->ops->output; - } - return 0; -} - -static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) -{ - if (p->tbl->family == AF_INET) { - p->neigh_setup = hostess_neigh_setup; - p->ucast_probes = 0; - p->mcast_probes = 0; - } - return 0; -} - -static void sv11_setup(struct net_device *dev) -{ - dev->open = hostess_open; - dev->stop = hostess_close; - dev->hard_start_xmit = hostess_queue_xmit; - dev->get_stats = hostess_get_stats; - dev->do_ioctl = hostess_ioctl; - dev->neigh_setup = hostess_neigh_setup_dev; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } /* * Description block for a Comtrol Hostess SV11 card */ - -static struct sv11_device *sv11_init(int iobase, int irq) + +static struct z8530_dev *sv11_init(int iobase, int irq) { - struct z8530_dev *dev; - struct sv11_device *sv; - + struct z8530_dev *sv; + struct net_device *netdev; /* * Get the needed I/O space */ - - if(!request_region(iobase, 8, "Comtrol SV11")) - { - printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase); + + if (!request_region(iobase, 8, "Comtrol SV11")) { + printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", + iobase); return NULL; } - - sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL); - if(!sv) - goto fail3; - - sv->if_ptr=&sv->netdev; - - sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup); - if(!sv->netdev.dev) - goto fail2; - - dev=&sv->sync; - + + sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL); + if (!sv) + goto err_kzalloc; + /* * Stuff in the I/O addressing */ - - dev->active = 0; - - dev->chanA.ctrlio=iobase+1; - dev->chanA.dataio=iobase+3; - dev->chanB.ctrlio=-1; - dev->chanB.dataio=-1; - dev->chanA.irqs=&z8530_nop; - dev->chanB.irqs=&z8530_nop; - - outb(0, iobase+4); /* DMA off */ - + + sv->active = 0; + + sv->chanA.ctrlio = iobase + 1; + sv->chanA.dataio = iobase + 3; + sv->chanB.ctrlio = -1; + sv->chanB.dataio = -1; + sv->chanA.irqs = &z8530_nop; + sv->chanB.irqs = &z8530_nop; + + outb(0, iobase + 4); /* DMA off */ + /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ - - if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0) - { + + if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, + "Hostess SV11", sv) < 0) { printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq); - goto fail1; + goto err_irq; } - - dev->irq=irq; - dev->chanA.private=sv; - dev->chanA.netdevice=sv->netdev.dev; - dev->chanA.dev=dev; - dev->chanB.dev=dev; - - if(dma) - { + + sv->irq = irq; + sv->chanA.private = sv; + sv->chanA.dev = sv; + sv->chanB.dev = sv; + + if (dma) { /* * You can have DMA off or 1 and 3 thats the lot * on the Comtrol. */ - dev->chanA.txdma=3; - dev->chanA.rxdma=1; - outb(0x03|0x08, iobase+4); /* DMA on */ - if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0) - goto fail; - - if(dma==1) - { - if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0) - goto dmafail; - } + sv->chanA.txdma = 3; + sv->chanA.rxdma = 1; + outb(0x03 | 0x08, iobase + 4); /* DMA on */ + if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)")) + goto err_txdma; + + if (dma == 1) + if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)")) + goto err_rxdma; } /* Kill our private IRQ line the hostess can end up chattering until the configuration is set */ disable_irq(irq); - + /* * Begin normal initialise */ - - if(z8530_init(dev)!=0) - { + + if (z8530_init(sv)) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); - goto dmafail2; + goto free_dma; } - z8530_channel_load(&dev->chanB, z8530_dead_port); - if(dev->type==Z85C30) - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); + z8530_channel_load(&sv->chanB, z8530_dead_port); + if (sv->type == Z85C30) + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream); else - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); - + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230); + enable_irq(irq); - /* * Now we can take the IRQ */ - if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0) - { - struct net_device *d=dev->chanA.netdevice; - /* - * Initialise the PPP components - */ - d->ml_priv = sv; - sppp_attach(&sv->netdev); - - /* - * Local fields - */ - - d->base_addr = iobase; - d->irq = irq; - - if(register_netdev(d)) - { - printk(KERN_ERR "%s: unable to register device.\n", - d->name); - sppp_detach(d); - goto dmafail2; - } + sv->chanA.netdevice = netdev = alloc_hdlcdev(sv); + if (!netdev) + goto free_dma; - z8530_describe(dev, "I/O", iobase); - dev->active=1; - return sv; + dev_to_hdlc(netdev)->attach = hostess_attach; + dev_to_hdlc(netdev)->xmit = hostess_queue_xmit; + netdev->open = hostess_open; + netdev->stop = hostess_close; + netdev->do_ioctl = hostess_ioctl; + netdev->base_addr = iobase; + netdev->irq = irq; + + if (register_hdlc_device(netdev)) { + printk(KERN_ERR "hostess: unable to register HDLC device.\n"); + free_netdev(netdev); + goto free_dma; } -dmafail2: - if(dma==1) - free_dma(dev->chanA.rxdma); -dmafail: - if(dma) - free_dma(dev->chanA.txdma); -fail: - free_irq(irq, dev); -fail1: - free_netdev(sv->netdev.dev); -fail2: + + z8530_describe(sv, "I/O", iobase); + sv->active = 1; + return sv; + +free_dma: + if (dma == 1) + free_dma(sv->chanA.rxdma); +err_rxdma: + if (dma) + free_dma(sv->chanA.txdma); +err_txdma: + free_irq(irq, sv); +err_irq: kfree(sv); -fail3: - release_region(iobase,8); +err_kzalloc: + release_region(iobase, 8); return NULL; } -static void sv11_shutdown(struct sv11_device *dev) +static void sv11_shutdown(struct z8530_dev *dev) { - sppp_detach(dev->netdev.dev); - unregister_netdev(dev->netdev.dev); - z8530_shutdown(&dev->sync); - free_irq(dev->sync.irq, dev); - if(dma) - { - if(dma==1) - free_dma(dev->sync.chanA.rxdma); - free_dma(dev->sync.chanA.txdma); + unregister_hdlc_device(dev->chanA.netdevice); + z8530_shutdown(dev); + free_irq(dev->irq, dev); + if (dma) { + if (dma == 1) + free_dma(dev->chanA.rxdma); + free_dma(dev->chanA.txdma); } - release_region(dev->sync.chanA.ctrlio-1, 8); - free_netdev(dev->netdev.dev); + release_region(dev->chanA.ctrlio - 1, 8); + free_netdev(dev->chanA.netdevice); kfree(dev); } -#ifdef MODULE - -static int io=0x200; -static int irq=9; +static int io = 0x200; +static int irq = 9; module_param(io, int, 0); MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card"); @@ -397,22 +328,17 @@ MODULE_AUTHOR("Alan Cox"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11"); -static struct sv11_device *sv11_unit; +static struct z8530_dev *sv11_unit; int init_module(void) { - printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n"); - printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n"); - if((sv11_unit=sv11_init(io,irq))==NULL) + if ((sv11_unit = sv11_init(io, irq)) == NULL) return -ENODEV; return 0; } void cleanup_module(void) { - if(sv11_unit) + if (sv11_unit) sv11_shutdown(sv11_unit); } - -#endif - |