diff options
Diffstat (limited to 'drivers/net/wan/wanxl.c')
| -rw-r--r-- | drivers/net/wan/wanxl.c | 839 |
1 files changed, 839 insertions, 0 deletions
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c new file mode 100644 index 000000000000..1e7b47704ad9 --- /dev/null +++ b/drivers/net/wan/wanxl.c @@ -0,0 +1,839 @@ +/* + * wanXL serial card driver for Linux + * host part + * + * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * Status: + * - Only DTE (external clock) support with NRZ and NRZI encodings + * - wanXL100 will require minor driver modifications, no access to hw + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/hdlc.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/delay.h> + +#include "wanxl.h" + +static const char* version = "wanXL serial card driver version: 0.48"; + +#define PLX_CTL_RESET 0x40000000 /* adapter reset */ + +#undef DEBUG_PKT +#undef DEBUG_PCI + +/* MAILBOX #1 - PUTS COMMANDS */ +#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */ +#ifdef __LITTLE_ENDIAN +#define MBX1_CMD_BSWAP 0x8C000001 /* little-endian Byte Swap Mode */ +#else +#define MBX1_CMD_BSWAP 0x8C000000 /* big-endian Byte Swap Mode */ +#endif + +/* MAILBOX #2 - DRAM SIZE */ +#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */ + + +typedef struct { + struct net_device *dev; + struct card_t *card; + spinlock_t lock; /* for wanxl_xmit */ + int node; /* physical port #0 - 3 */ + unsigned int clock_type; + int tx_in, tx_out; + struct sk_buff *tx_skbs[TX_BUFFERS]; +}port_t; + + +typedef struct { + desc_t rx_descs[RX_QUEUE_LENGTH]; + port_status_t port_status[4]; +}card_status_t; + + +typedef struct card_t { + int n_ports; /* 1, 2 or 4 ports */ + u8 irq; + + u8 __iomem *plx; /* PLX PCI9060 virtual base address */ + struct pci_dev *pdev; /* for pci_name(pdev) */ + int rx_in; + struct sk_buff *rx_skbs[RX_QUEUE_LENGTH]; + card_status_t *status; /* shared between host and card */ + dma_addr_t status_address; + port_t ports[0]; /* 1 - 4 port_t structures follow */ +}card_t; + + + +static inline port_t* dev_to_port(struct net_device *dev) +{ + return (port_t *)dev_to_hdlc(dev)->priv; +} + + +static inline port_status_t* get_status(port_t *port) +{ + return &port->card->status->port_status[port->node]; +} + + +#ifdef DEBUG_PCI +static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr, + size_t size, int direction) +{ + dma_addr_t addr = pci_map_single(pdev, ptr, size, direction); + if (addr + size > 0x100000000LL) + printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory" + " at 0x%LX!\n", pci_name(pdev), + (unsigned long long)addr); + return addr; +} + +#undef pci_map_single +#define pci_map_single pci_map_single_debug +#endif + + +/* Cable and/or personality module change interrupt service */ +static inline void wanxl_cable_intr(port_t *port) +{ + u32 value = get_status(port)->cable; + int valid = 1; + const char *cable, *pm, *dte = "", *dsr = "", *dcd = ""; + + switch(value & 0x7) { + case STATUS_CABLE_V35: cable = "V.35"; break; + case STATUS_CABLE_X21: cable = "X.21"; break; + case STATUS_CABLE_V24: cable = "V.24"; break; + case STATUS_CABLE_EIA530: cable = "EIA530"; break; + case STATUS_CABLE_NONE: cable = "no"; break; + default: cable = "invalid"; + } + + switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) { + case STATUS_CABLE_V35: pm = "V.35"; break; + case STATUS_CABLE_X21: pm = "X.21"; break; + case STATUS_CABLE_V24: pm = "V.24"; break; + case STATUS_CABLE_EIA530: pm = "EIA530"; break; + case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break; + default: pm = "invalid personality"; valid = 0; + } + + if (valid) { + if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) { + dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" : + ", DSR off"; + dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" : + ", carrier off"; + } + dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE"; + } + printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n", + port->dev->name, pm, dte, cable, dsr, dcd); + + hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev); +} + + + +/* Transmit complete interrupt service */ +static inline void wanxl_tx_intr(port_t *port) +{ + struct net_device *dev = port->dev; + struct net_device_stats *stats = hdlc_stats(dev); + while (1) { + desc_t *desc = &get_status(port)->tx_descs[port->tx_in]; + struct sk_buff *skb = port->tx_skbs[port->tx_in]; + + switch (desc->stat) { + case PACKET_FULL: + case PACKET_EMPTY: + netif_wake_queue(dev); + return; + + case PACKET_UNDERRUN: + stats->tx_errors++; + stats->tx_fifo_errors++; + break; + + default: + stats->tx_packets++; + stats->tx_bytes += skb->len; + } + desc->stat = PACKET_EMPTY; /* Free descriptor */ + pci_unmap_single(port->card->pdev, desc->address, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + port->tx_in = (port->tx_in + 1) % TX_BUFFERS; + } +} + + + +/* Receive complete interrupt service */ +static inline void wanxl_rx_intr(card_t *card) +{ + desc_t *desc; + while (desc = &card->status->rx_descs[card->rx_in], + desc->stat != PACKET_EMPTY) { + if ((desc->stat & PACKET_PORT_MASK) > card->n_ports) + printk(KERN_CRIT "wanXL %s: received packet for" + " nonexistent port\n", pci_name(card->pdev)); + else { + struct sk_buff *skb = card->rx_skbs[card->rx_in]; + port_t *port = &card->ports[desc->stat & + PACKET_PORT_MASK]; + struct net_device *dev = port->dev; + struct net_device_stats *stats = hdlc_stats(dev); + + if (!skb) + stats->rx_dropped++; + else { + pci_unmap_single(card->pdev, desc->address, + BUFFER_LENGTH, + PCI_DMA_FROMDEVICE); + skb_put(skb, desc->length); + +#ifdef DEBUG_PKT + printk(KERN_DEBUG "%s RX(%i):", dev->name, + skb->len); + debug_frame(skb); +#endif + stats->rx_packets++; + stats->rx_bytes += skb->len; + dev->last_rx = jiffies; + skb->protocol = hdlc_type_trans(skb, dev); + netif_rx(skb); + skb = NULL; + } + + if (!skb) { + skb = dev_alloc_skb(BUFFER_LENGTH); + desc->address = skb ? + pci_map_single(card->pdev, skb->data, + BUFFER_LENGTH, + PCI_DMA_FROMDEVICE) : 0; + card->rx_skbs[card->rx_in] = skb; + } + } + desc->stat = PACKET_EMPTY; /* Free descriptor */ + card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH; + } +} + + + +static irqreturn_t wanxl_intr(int irq, void* dev_id, struct pt_regs *regs) +{ + card_t *card = dev_id; + int i; + u32 stat; + int handled = 0; + + + while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) { + handled = 1; + writel(stat, card->plx + PLX_DOORBELL_FROM_CARD); + + for (i = 0; i < card->n_ports; i++) { + if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i))) + wanxl_tx_intr(&card->ports[i]); + if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i))) + wanxl_cable_intr(&card->ports[i]); + } + if (stat & (1 << DOORBELL_FROM_CARD_RX)) + wanxl_rx_intr(card); + } + + return IRQ_RETVAL(handled); +} + + + +static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev) +{ + port_t *port = dev_to_port(dev); + desc_t *desc; + + spin_lock(&port->lock); + + desc = &get_status(port)->tx_descs[port->tx_out]; + if (desc->stat != PACKET_EMPTY) { + /* should never happen - previous xmit should stop queue */ +#ifdef DEBUG_PKT + printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); +#endif + netif_stop_queue(dev); + spin_unlock_irq(&port->lock); + return 1; /* request packet to be queued */ + } + +#ifdef DEBUG_PKT + printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); + debug_frame(skb); +#endif + + port->tx_skbs[port->tx_out] = skb; + desc->address = pci_map_single(port->card->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + desc->length = skb->len; + desc->stat = PACKET_FULL; + writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node), + port->card->plx + PLX_DOORBELL_TO_CARD); + dev->trans_start = jiffies; + + port->tx_out = (port->tx_out + 1) % TX_BUFFERS; + + if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) { + netif_stop_queue(dev); +#ifdef DEBUG_PKT + printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); +#endif + } + + spin_unlock(&port->lock); + return 0; +} + + + +static int wanxl_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + port_t *port = dev_to_port(dev); + + if (encoding != ENCODING_NRZ && + encoding != ENCODING_NRZI) + return -EINVAL; + + if (parity != PARITY_NONE && + parity != PARITY_CRC32_PR1_CCITT && + parity != PARITY_CRC16_PR1_CCITT && + parity != PARITY_CRC32_PR0_CCITT && + parity != PARITY_CRC16_PR0_CCITT) + return -EINVAL; + + get_status(port)->encoding = encoding; + get_status(port)->parity = parity; + return 0; +} + + + +static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings line; + port_t *port = dev_to_port(dev); + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch (ifr->ifr_settings.type) { + case IF_GET_IFACE: + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + line.clock_type = get_status(port)->clocking; + line.clock_rate = 0; + line.loopback = 0; + + if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (dev->flags & IFF_UP) + return -EBUSY; + + if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync, + size)) + return -EFAULT; + + if (line.clock_type != CLOCK_EXT && + line.clock_type != CLOCK_TXFROMRX) + return -EINVAL; /* No such clock setting */ + + if (line.loopback != 0) + return -EINVAL; + + get_status(port)->clocking = line.clock_type; + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + + + +static int wanxl_open(struct net_device *dev) +{ + port_t *port = dev_to_port(dev); + u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD; + unsigned long timeout; + int i; + + if (get_status(port)->open) { + printk(KERN_ERR "%s: port already open\n", dev->name); + return -EIO; + } + if ((i = hdlc_open(dev)) != 0) + return i; + + port->tx_in = port->tx_out = 0; + for (i = 0; i < TX_BUFFERS; i++) + get_status(port)->tx_descs[i].stat = PACKET_EMPTY; + /* signal the card */ + writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr); + + timeout = jiffies + HZ; + do + if (get_status(port)->open) { + netif_start_queue(dev); + return 0; + } + while (time_after(timeout, jiffies)); + + printk(KERN_ERR "%s: unable to open port\n", dev->name); + /* ask the card to close the port, should it be still alive */ + writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr); + return -EFAULT; +} + + + +static int wanxl_close(struct net_device *dev) +{ + port_t *port = dev_to_port(dev); + unsigned long timeout; + int i; + + hdlc_close(dev); + /* signal the card */ + writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), + port->card->plx + PLX_DOORBELL_TO_CARD); + + timeout = jiffies + HZ; + do + if (!get_status(port)->open) + break; + while (time_after(timeout, jiffies)); + + if (get_status(port)->open) + printk(KERN_ERR "%s: unable to close port\n", dev->name); + + netif_stop_queue(dev); + + for (i = 0; i < TX_BUFFERS; i++) { + desc_t *desc = &get_status(port)->tx_descs[i]; + + if (desc->stat != PACKET_EMPTY) { + desc->stat = PACKET_EMPTY; + pci_unmap_single(port->card->pdev, desc->address, + port->tx_skbs[i]->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(port->tx_skbs[i]); + } + } + return 0; +} + + + +static struct net_device_stats *wanxl_get_stats(struct net_device *dev) +{ + struct net_device_stats *stats = hdlc_stats(dev); + port_t *port = dev_to_port(dev); + + stats->rx_over_errors = get_status(port)->rx_overruns; + stats->rx_frame_errors = get_status(port)->rx_frame_errors; + stats->rx_errors = stats->rx_over_errors + stats->rx_frame_errors; + return stats; +} + + + +static int wanxl_puts_command(card_t *card, u32 cmd) +{ + unsigned long timeout = jiffies + 5 * HZ; + + writel(cmd, card->plx + PLX_MAILBOX_1); + do { + if (readl(card->plx + PLX_MAILBOX_1) == 0) + return 0; + + schedule(); + }while (time_after(timeout, jiffies)); + + return -1; +} + + + +static void wanxl_reset(card_t *card) +{ + u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET; + + writel(0x80, card->plx + PLX_MAILBOX_0); + writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL); + readl(card->plx + PLX_CONTROL); /* wait for posted write */ + udelay(1); + writel(old_value, card->plx + PLX_CONTROL); + readl(card->plx + PLX_CONTROL); /* wait for posted write */ +} + + + +static void wanxl_pci_remove_one(struct pci_dev *pdev) +{ + card_t *card = pci_get_drvdata(pdev); + int i; + + for (i = 0; i < card->n_ports; i++) { + unregister_hdlc_device(card->ports[i].dev); + free_netdev(card->ports[i].dev); + } + + /* unregister and free all host resources */ + if (card->irq) + free_irq(card->irq, card); + + wanxl_reset(card); + + for (i = 0; i < RX_QUEUE_LENGTH; i++) + if (card->rx_skbs[i]) { + pci_unmap_single(card->pdev, + card->status->rx_descs[i].address, + BUFFER_LENGTH, PCI_DMA_FROMDEVICE); + dev_kfree_skb(card->rx_skbs[i]); + } + + if (card->plx) + iounmap(card->plx); + + if (card->status) + pci_free_consistent(pdev, sizeof(card_status_t), + card->status, card->status_address); + + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(card); +} + + +#include "wanxlfw.inc" + +static int __devinit wanxl_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + card_t *card; + u32 ramsize, stat; + unsigned long timeout; + u32 plx_phy; /* PLX PCI base address */ + u32 mem_phy; /* memory PCI base addr */ + u8 __iomem *mem; /* memory virtual base addr */ + int i, ports, alloc_size; + +#ifndef MODULE + static int printed_version; + if (!printed_version) { + printed_version++; + printk(KERN_INFO "%s\n", version); + } +#endif + + i = pci_enable_device(pdev); + if (i) + return i; + + /* QUICC can only access first 256 MB of host RAM directly, + but PLX9060 DMA does 32-bits for actual packet data transfers */ + + /* FIXME when PCI/DMA subsystems are fixed. + We set both dma_mask and consistent_dma_mask to 28 bits + and pray pci_alloc_consistent() will use this info. It should + work on most platforms */ + if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) || + pci_set_dma_mask(pdev, 0x0FFFFFFF)) { + printk(KERN_ERR "wanXL: No usable DMA configuration\n"); + return -EIO; + } + + i = pci_request_regions(pdev, "wanXL"); + if (i) { + pci_disable_device(pdev); + return i; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break; + case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break; + default: ports = 4; + } + + alloc_size = sizeof(card_t) + ports * sizeof(port_t); + card = kmalloc(alloc_size, GFP_KERNEL); + if (card == NULL) { + printk(KERN_ERR "wanXL %s: unable to allocate memory\n", + pci_name(pdev)); + pci_release_regions(pdev); + pci_disable_device(pdev); + return -ENOBUFS; + } + memset(card, 0, alloc_size); + + pci_set_drvdata(pdev, card); + card->pdev = pdev; + + card->status = pci_alloc_consistent(pdev, sizeof(card_status_t), + &card->status_address); + if (card->status == NULL) { + wanxl_pci_remove_one(pdev); + return -ENOBUFS; + } + +#ifdef DEBUG_PCI + printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory" + " at 0x%LX\n", pci_name(pdev), + (unsigned long long)card->status_address); +#endif + + /* FIXME when PCI/DMA subsystems are fixed. + We set both dma_mask and consistent_dma_mask back to 32 bits + to indicate the card can do 32-bit DMA addressing */ + if (pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF) || + pci_set_dma_mask(pdev, 0xFFFFFFFF)) { + printk(KERN_ERR "wanXL: No usable DMA configuration\n"); + wanxl_pci_remove_one(pdev); + return -EIO; + } + + /* set up PLX mapping */ + plx_phy = pci_resource_start(pdev, 0); + card->plx = ioremap_nocache(plx_phy, 0x70); + +#if RESET_WHILE_LOADING + wanxl_reset(card); +#endif + + timeout = jiffies + 20 * HZ; + while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) { + if (time_before(timeout, jiffies)) { + printk(KERN_WARNING "wanXL %s: timeout waiting for" + " PUTS to complete\n", pci_name(pdev)); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + + switch(stat & 0xC0) { + case 0x00: /* hmm - PUTS completed with non-zero code? */ + case 0x80: /* PUTS still testing the hardware */ + break; + + default: + printk(KERN_WARNING "wanXL %s: PUTS test 0x%X" + " failed\n", pci_name(pdev), stat & 0x30); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + + schedule(); + } + + /* get on-board memory size (PUTS detects no more than 4 MB) */ + ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK; + + /* set up on-board RAM mapping */ + mem_phy = pci_resource_start(pdev, 2); + + + /* sanity check the board's reported memory size */ + if (ramsize < BUFFERS_ADDR + + (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) { + printk(KERN_WARNING "wanXL %s: no enough on-board RAM" + " (%u bytes detected, %u bytes required)\n", + pci_name(pdev), ramsize, BUFFERS_ADDR + + (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + + if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) { + printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap" + " Mode\n", pci_name(pdev)); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + + for (i = 0; i < RX_QUEUE_LENGTH; i++) { + struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH); + card->rx_skbs[i] = skb; + if (skb) + card->status->rx_descs[i].address = + pci_map_single(card->pdev, skb->data, + BUFFER_LENGTH, + PCI_DMA_FROMDEVICE); + } + + mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware)); + for (i = 0; i < sizeof(firmware); i += 4) + writel(htonl(*(u32*)(firmware + i)), mem + PDM_OFFSET + i); + + for (i = 0; i < ports; i++) + writel(card->status_address + + (void *)&card->status->port_status[i] - + (void *)card->status, mem + PDM_OFFSET + 4 + i * 4); + writel(card->status_address, mem + PDM_OFFSET + 20); + writel(PDM_OFFSET, mem); + iounmap(mem); + + writel(0, card->plx + PLX_MAILBOX_5); + + if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) { + printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n", + pci_name(pdev)); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + + stat = 0; + timeout = jiffies + 5 * HZ; + do { + if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0) + break; + schedule(); + }while (time_after(timeout, jiffies)); + + if (!stat) { + printk(KERN_WARNING "wanXL %s: timeout while initializing card" + "firmware\n", pci_name(pdev)); + wanxl_pci_remove_one(pdev); + return -ENODEV; + } + +#if DETECT_RAM + ramsize = stat; +#endif + + printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n", + pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq); + + /* Allocate IRQ */ + if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) { + printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n", + pci_name(pdev), pdev->irq); + wanxl_pci_remove_one(pdev); + return -EBUSY; + } + card->irq = pdev->irq; + + for (i = 0; i < ports; i++) { + hdlc_device *hdlc; + port_t *port = &card->ports[i]; + struct net_device *dev = alloc_hdlcdev(port); + if (!dev) { + printk(KERN_ERR "wanXL %s: unable to allocate" + " memory\n", pci_name(pdev)); + wanxl_pci_remove_one(pdev); + return -ENOMEM; + } + + port->dev = dev; + hdlc = dev_to_hdlc(dev); + spin_lock_init(&port->lock); + SET_MODULE_OWNER(dev); + dev->tx_queue_len = 50; + dev->do_ioctl = wanxl_ioctl; + dev->open = wanxl_open; + dev->stop = wanxl_close; + hdlc->attach = wanxl_attach; + hdlc->xmit = wanxl_xmit; + dev->get_stats = wanxl_get_stats; + port->card = card; + port->node = i; + get_status(port)->clocking = CLOCK_EXT; + if (register_hdlc_device(dev)) { + printk(KERN_ERR "wanXL %s: unable to register hdlc" + " device\n", pci_name(pdev)); + free_netdev(dev); + wanxl_pci_remove_one(pdev); + return -ENOBUFS; + } + card->n_ports++; + } + + printk(KERN_INFO "wanXL %s: port", pci_name(pdev)); + for (i = 0; i < ports; i++) + printk("%s #%i: %s", i ? "," : "", i, + card->ports[i].dev->name); + printk("\n"); + + for (i = 0; i < ports; i++) + wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/ + + return 0; +} + +static struct pci_device_id wanxl_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + + +static struct pci_driver wanxl_pci_driver = { + .name = "wanXL", + .id_table = wanxl_pci_tbl, + .probe = wanxl_pci_init_one, + .remove = wanxl_pci_remove_one, +}; + + +static int __init wanxl_init_module(void) +{ +#ifdef MODULE + printk(KERN_INFO "%s\n", version); +#endif + return pci_module_init(&wanxl_pci_driver); +} + +static void __exit wanxl_cleanup_module(void) +{ + pci_unregister_driver(&wanxl_pci_driver); +} + + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl); + +module_init(wanxl_init_module); +module_exit(wanxl_cleanup_module); |