diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 146 |
1 files changed, 25 insertions, 121 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index e4f9f747de88..8a0823588c51 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -151,6 +151,12 @@ config LIBERTAS_SDIO ---help--- A driver for Marvell Libertas 8385 and 8686 SDIO devices. +config LIBERTAS_SPI + tristate "Marvell Libertas 8686 SPI 802.11b/g cards" + depends on LIBERTAS && SPI && GENERIC_GPIO + ---help--- + A driver for Marvell Libertas 8686 SPI devices. + config LIBERTAS_DEBUG bool "Enable full debugging output in the Libertas module." depends on LIBERTAS @@ -188,127 +194,6 @@ config AIRO The driver can be compiled as a module and will be named "airo". -config HERMES - tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select CRYPTO - select CRYPTO_MICHAEL_MIC - ---help--- - A driver for 802.11b wireless cards based on the "Hermes" or - Intersil HFA384x (Prism 2) MAC controller. This includes the vast - majority of the PCMCIA 802.11b cards (which are nearly all rebadges) - - except for the Cisco/Aironet cards. Cards supported include the - Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, - Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, - IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear - MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel - IPW2011, and Symbol Spectrum24 High Rate amongst others. - - This option includes the guts of the driver, but in order to - actually use a card you will also need to enable support for PCMCIA - Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. - - You will also very likely also need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works : - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> - -config HERMES_CACHE_FW_ON_INIT - bool "Cache Hermes firmware on driver initialisation" - depends on HERMES - default y - ---help--- - Say Y to cache any firmware required by the Hermes drivers - on startup. The firmware will remain cached until the - driver is unloaded. The cache uses 64K of RAM. - - Otherwise load the firmware from userspace as required. In - this case the driver should be unloaded and restarted - whenever the firmware is changed. - - If you are not sure, say Y. - -config APPLE_AIRPORT - tristate "Apple Airport support (built-in)" - depends on PPC_PMAC && HERMES - help - Say Y here to support the Airport 802.11b wireless Ethernet hardware - built into the Macintosh iBook and other recent PowerPC-based - Macintosh machines. This is essentially a Lucent Orinoco card with - a non-standard interface. - - This driver does not support the Airport Extreme (802.11b/g). Use - the BCM43xx driver for Airport Extreme cards. - -config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in PLX9052 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. The Netgear - MA301 is such an adaptor. - -config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in TMD7160 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. - -config NORTEL_HERMES - tristate "Nortel emobility PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in Nortel emobility PCI adaptors. These - adaptors are not full PCMCIA controllers, but act as a more limited - PCI <-> PCMCIA bridge. - -config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support" - depends on PCI && HERMES - help - Enable support for PCI and mini-PCI 802.11b wireless NICs based on - the Prism 2.5 chipset. These are true PCI cards, not the 802.11b - PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also - common. Some of the built-in wireless adaptors in laptops are of - this variety. - -config PCMCIA_HERMES - tristate "Hermes PCMCIA card support" - depends on PCMCIA && HERMES - ---help--- - A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and - others). It should also be usable on various Prism II based cards - such as the Linksys, D-Link and Farallon Skyline. It should also - work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. - - You will very likely need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works: - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - -config PCMCIA_SPECTRUM - tristate "Symbol Spectrum24 Trilogy PCMCIA card support" - depends on PCMCIA && HERMES - ---help--- - - This is a driver for 802.11b cards using RAM-loadable Symbol - firmware, such as Symbol Wireless Networker LA4100, CompactFlash - cards by Socket Communications and Intel PRO/Wireless 2011B. - - This driver requires firmware download on startup. Utilities - for downloading Symbol firmware are available at - <http://sourceforge.net/projects/orinoco/> - config ATMEL tristate "Atmel at76c50x chipset 802.11b support" depends on (PCI || PCMCIA) && WLAN_80211 @@ -343,6 +228,14 @@ config PCMCIA_ATMEL Enable support for PCMCIA cards containing the Atmel at76c502 and at76c504 chips. +config AT76C50X_USB + tristate "Atmel at76c503/at76c505/at76c505a USB cards" + depends on MAC80211 && WLAN_80211 && USB + select FW_LOADER + ---help--- + Enable support for USB Wireless devices using Atmel at76c503, + at76c505 or at76c505a chips. + config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 @@ -580,9 +473,19 @@ config MAC80211_HWSIM To compile this driver as a module, choose M here: the module will be called mac80211_hwsim. If unsure, say N. +config MWL8K + tristate "Marvell 88W8xxx PCI/PCIe Wireless support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + ---help--- + This driver supports Marvell TOPDOG 802.11 wireless cards. + + To compile this driver as a module, choose M here: the module + will be called mwl8k. If unsure, say N. + source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/ath5k/Kconfig" source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ar9170/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" @@ -590,5 +493,6 @@ source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/orinoco/Kconfig" endmenu |