summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/base.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c2373
1 files changed, 1287 insertions, 1086 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index d77ce9906b6c..f1ae75d35d5d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -52,6 +52,7 @@
#include <linux/ethtool.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <linux/etherdevice.h>
#include <net/ieee80211_radiotap.h>
@@ -61,6 +62,7 @@
#include "reg.h"
#include "debug.h"
#include "ani.h"
+#include "../debug.h"
static int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
@@ -70,11 +72,6 @@ static int modparam_all_channels;
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
-
-/******************\
-* Internal defines *
-\******************/
-
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
MODULE_AUTHOR("Nick Kossifidis");
@@ -83,6 +80,10 @@ MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
+static int ath5k_beacon_update(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
/* Known PCI ids */
static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
@@ -190,129 +191,6 @@ static const struct ieee80211_rate ath5k_rates[] = {
/* XR missing */
};
-/*
- * Prototypes - PCI stack related functions
- */
-static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
-#ifdef CONFIG_PM_SLEEP
-static int ath5k_pci_suspend(struct device *dev);
-static int ath5k_pci_resume(struct device *dev);
-
-static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
-#define ATH5K_PM_OPS (&ath5k_pm_ops)
-#else
-#define ATH5K_PM_OPS NULL
-#endif /* CONFIG_PM_SLEEP */
-
-static struct pci_driver ath5k_pci_driver = {
- .name = KBUILD_MODNAME,
- .id_table = ath5k_pci_id_table,
- .probe = ath5k_pci_probe,
- .remove = __devexit_p(ath5k_pci_remove),
- .driver.pm = ATH5K_PM_OPS,
-};
-
-
-
-/*
- * Prototypes - MAC 802.11 stack related functions
- */
-static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ath5k_txq *txq);
-static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
-static int ath5k_start(struct ieee80211_hw *hw);
-static void ath5k_stop(struct ieee80211_hw *hw);
-static int ath5k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
-static void ath5k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
-static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
-static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
- struct netdev_hw_addr_list *mc_list);
-static void ath5k_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *new_flags,
- u64 multicast);
-static int ath5k_set_key(struct ieee80211_hw *hw,
- enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key);
-static int ath5k_get_stats(struct ieee80211_hw *hw,
- struct ieee80211_low_level_stats *stats);
-static int ath5k_get_survey(struct ieee80211_hw *hw,
- int idx, struct survey_info *survey);
-static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
-static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
-static void ath5k_reset_tsf(struct ieee80211_hw *hw);
-static int ath5k_beacon_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
-static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes);
-static void ath5k_sw_scan_start(struct ieee80211_hw *hw);
-static void ath5k_sw_scan_complete(struct ieee80211_hw *hw);
-static void ath5k_set_coverage_class(struct ieee80211_hw *hw,
- u8 coverage_class);
-
-static const struct ieee80211_ops ath5k_hw_ops = {
- .tx = ath5k_tx,
- .start = ath5k_start,
- .stop = ath5k_stop,
- .add_interface = ath5k_add_interface,
- .remove_interface = ath5k_remove_interface,
- .config = ath5k_config,
- .prepare_multicast = ath5k_prepare_multicast,
- .configure_filter = ath5k_configure_filter,
- .set_key = ath5k_set_key,
- .get_stats = ath5k_get_stats,
- .get_survey = ath5k_get_survey,
- .conf_tx = NULL,
- .get_tsf = ath5k_get_tsf,
- .set_tsf = ath5k_set_tsf,
- .reset_tsf = ath5k_reset_tsf,
- .bss_info_changed = ath5k_bss_info_changed,
- .sw_scan_start = ath5k_sw_scan_start,
- .sw_scan_complete = ath5k_sw_scan_complete,
- .set_coverage_class = ath5k_set_coverage_class,
-};
-
-/*
- * Prototypes - Internal functions
- */
-/* Attach detach */
-static int ath5k_attach(struct pci_dev *pdev,
- struct ieee80211_hw *hw);
-static void ath5k_detach(struct pci_dev *pdev,
- struct ieee80211_hw *hw);
-/* Channel/mode setup */
-static inline short ath5k_ieee2mhz(short chan);
-static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
- struct ieee80211_channel *channels,
- unsigned int mode,
- unsigned int max);
-static int ath5k_setup_bands(struct ieee80211_hw *hw);
-static int ath5k_chan_set(struct ath5k_softc *sc,
- struct ieee80211_channel *chan);
-static void ath5k_setcurmode(struct ath5k_softc *sc,
- unsigned int mode);
-static void ath5k_mode_setup(struct ath5k_softc *sc);
-
-/* Descriptor setup */
-static int ath5k_desc_alloc(struct ath5k_softc *sc,
- struct pci_dev *pdev);
-static void ath5k_desc_free(struct ath5k_softc *sc,
- struct pci_dev *pdev);
-/* Buffers setup */
-static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
- struct ath5k_buf *bf);
-static int ath5k_txbuf_setup(struct ath5k_softc *sc,
- struct ath5k_buf *bf,
- struct ath5k_txq *txq, int padsize);
-
static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
struct ath5k_buf *bf)
{
@@ -345,35 +223,6 @@ static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
}
-/* Queues setup */
-static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
- int qtype, int subtype);
-static int ath5k_beaconq_setup(struct ath5k_hw *ah);
-static int ath5k_beaconq_config(struct ath5k_softc *sc);
-static void ath5k_txq_drainq(struct ath5k_softc *sc,
- struct ath5k_txq *txq);
-static void ath5k_txq_cleanup(struct ath5k_softc *sc);
-static void ath5k_txq_release(struct ath5k_softc *sc);
-/* Rx handling */
-static int ath5k_rx_start(struct ath5k_softc *sc);
-static void ath5k_rx_stop(struct ath5k_softc *sc);
-static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
- struct sk_buff *skb,
- struct ath5k_rx_status *rs);
-static void ath5k_tasklet_rx(unsigned long data);
-/* Tx handling */
-static void ath5k_tx_processq(struct ath5k_softc *sc,
- struct ath5k_txq *txq);
-static void ath5k_tasklet_tx(unsigned long data);
-/* Beacon handling */
-static int ath5k_beacon_setup(struct ath5k_softc *sc,
- struct ath5k_buf *bf);
-static void ath5k_beacon_send(struct ath5k_softc *sc);
-static void ath5k_beacon_config(struct ath5k_softc *sc);
-static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
-static void ath5k_tasklet_beacon(unsigned long data);
-static void ath5k_tasklet_ani(unsigned long data);
-
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
{
u64 tsf = ath5k_hw_get_tsf64(ah);
@@ -384,50 +233,6 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
return (tsf & ~0x7fff) | rstamp;
}
-/* Interrupt handling */
-static int ath5k_init(struct ath5k_softc *sc);
-static int ath5k_stop_locked(struct ath5k_softc *sc);
-static int ath5k_stop_hw(struct ath5k_softc *sc);
-static irqreturn_t ath5k_intr(int irq, void *dev_id);
-static void ath5k_reset_work(struct work_struct *work);
-
-static void ath5k_tasklet_calibrate(unsigned long data);
-
-/*
- * Module init/exit functions
- */
-static int __init
-init_ath5k_pci(void)
-{
- int ret;
-
- ath5k_debug_init();
-
- ret = pci_register_driver(&ath5k_pci_driver);
- if (ret) {
- printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
- return ret;
- }
-
- return 0;
-}
-
-static void __exit
-exit_ath5k_pci(void)
-{
- pci_unregister_driver(&ath5k_pci_driver);
-
- ath5k_debug_finish();
-}
-
-module_init(init_ath5k_pci);
-module_exit(exit_ath5k_pci);
-
-
-/********************\
-* PCI Initialization *
-\********************/
-
static const char *
ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
{
@@ -466,299 +271,6 @@ static const struct ath_ops ath5k_common_ops = {
.write = ath5k_iowrite32,
};
-static int __devinit
-ath5k_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- void __iomem *mem;
- struct ath5k_softc *sc;
- struct ath_common *common;
- struct ieee80211_hw *hw;
- int ret;
- u8 csz;
-
- /*
- * L0s needs to be disabled on all ath5k cards.
- *
- * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
- * by default in the future in 2.6.36) this will also mean both L1 and
- * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
- * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
- * though but cannot currently undue the effect of a blacklist, for
- * details you can read pcie_aspm_sanity_check() and see how it adjusts
- * the device link capability.
- *
- * It may be possible in the future to implement some PCI API to allow
- * drivers to override blacklists for pre 1.1 PCIe but for now it is
- * best to accept that both L0s and L1 will be disabled completely for
- * distributions shipping with CONFIG_PCIEASPM rather than having this
- * issue present. Motivation for adding this new API will be to help
- * with power consumption for some of these devices.
- */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
-
- ret = pci_enable_device(pdev);
- if (ret) {
- dev_err(&pdev->dev, "can't enable device\n");
- goto err;
- }
-
- /* XXX 32-bit addressing only */
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret) {
- dev_err(&pdev->dev, "32-bit DMA not available\n");
- goto err_dis;
- }
-
- /*
- * Cache line size is used to size and align various
- * structures used to communicate with the hardware.
- */
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
- if (csz == 0) {
- /*
- * Linux 2.4.18 (at least) writes the cache line size
- * register as a 16-bit wide register which is wrong.
- * We must have this setup properly for rx buffer
- * DMA to work so force a reasonable value here if it
- * comes up zero.
- */
- csz = L1_CACHE_BYTES >> 2;
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
- }
- /*
- * The default setting of latency timer yields poor results,
- * set it to the value used by other systems. It may be worth
- * tweaking this setting more.
- */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
-
- /* Enable bus mastering */
- pci_set_master(pdev);
-
- /*
- * Disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state.
- */
- pci_write_config_byte(pdev, 0x41, 0);
-
- ret = pci_request_region(pdev, 0, "ath5k");
- if (ret) {
- dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
- goto err_dis;
- }
-
- mem = pci_iomap(pdev, 0, 0);
- if (!mem) {
- dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
- ret = -EIO;
- goto err_reg;
- }
-
- /*
- * Allocate hw (mac80211 main struct)
- * and hw->priv (driver private data)
- */
- hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
- if (hw == NULL) {
- dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
- ret = -ENOMEM;
- goto err_map;
- }
-
- dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
-
- /* Initialize driver private data */
- SET_IEEE80211_DEV(hw, &pdev->dev);
- hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_SIGNAL_DBM;
-
- hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_MESH_POINT);
-
- hw->extra_tx_headroom = 2;
- hw->channel_change_time = 5000;
- sc = hw->priv;
- sc->hw = hw;
- sc->pdev = pdev;
-
- ath5k_debug_init_device(sc);
-
- /*
- * Mark the device as detached to avoid processing
- * interrupts until setup is complete.
- */
- __set_bit(ATH_STAT_INVALID, sc->status);
-
- sc->iobase = mem; /* So we can unmap it on detach */
- sc->opmode = NL80211_IFTYPE_STATION;
- sc->bintval = 1000;
- mutex_init(&sc->lock);
- spin_lock_init(&sc->rxbuflock);
- spin_lock_init(&sc->txbuflock);
- spin_lock_init(&sc->block);
-
- /* Set private data */
- pci_set_drvdata(pdev, sc);
-
- /* Setup interrupt handler */
- ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
- if (ret) {
- ATH5K_ERR(sc, "request_irq failed\n");
- goto err_free;
- }
-
- /*If we passed the test malloc a ath5k_hw struct*/
- sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
- if (!sc->ah) {
- ret = -ENOMEM;
- ATH5K_ERR(sc, "out of memory\n");
- goto err_irq;
- }
-
- sc->ah->ah_sc = sc;
- sc->ah->ah_iobase = sc->iobase;
- common = ath5k_hw_common(sc->ah);
- common->ops = &ath5k_common_ops;
- common->ah = sc->ah;
- common->hw = hw;
- common->cachelsz = csz << 2; /* convert to bytes */
-
- /* Initialize device */
- ret = ath5k_hw_attach(sc);
- if (ret) {
- goto err_free_ah;
- }
-
- /* set up multi-rate retry capabilities */
- if (sc->ah->ah_version == AR5K_AR5212) {
- hw->max_rates = 4;
- hw->max_rate_tries = 11;
- }
-
- /* Finish private driver data initialization */
- ret = ath5k_attach(pdev, hw);
- if (ret)
- goto err_ah;
-
- ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
- sc->ah->ah_mac_srev,
- sc->ah->ah_phy_revision);
-
- if (!sc->ah->ah_single_chip) {
- /* Single chip radio (!RF5111) */
- if (sc->ah->ah_radio_5ghz_revision &&
- !sc->ah->ah_radio_2ghz_revision) {
- /* No 5GHz support -> report 2GHz radio */
- if (!test_bit(AR5K_MODE_11A,
- sc->ah->ah_capabilities.cap_mode)) {
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- /* No 2GHz support (5110 and some
- * 5Ghz only cards) -> report 5Ghz radio */
- } else if (!test_bit(AR5K_MODE_11B,
- sc->ah->ah_capabilities.cap_mode)) {
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- /* Multiband radio */
- } else {
- ATH5K_INFO(sc, "RF%s multiband radio found"
- " (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- }
- }
- /* Multi chip radio (RF5111 - RF2111) ->
- * report both 2GHz/5GHz radios */
- else if (sc->ah->ah_radio_5ghz_revision &&
- sc->ah->ah_radio_2ghz_revision){
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_2ghz_revision),
- sc->ah->ah_radio_2ghz_revision);
- }
- }
-
-
- /* ready to process interrupts */
- __clear_bit(ATH_STAT_INVALID, sc->status);
-
- return 0;
-err_ah:
- ath5k_hw_detach(sc->ah);
-err_irq:
- free_irq(pdev->irq, sc);
-err_free_ah:
- kfree(sc->ah);
-err_free:
- ieee80211_free_hw(hw);
-err_map:
- pci_iounmap(pdev, mem);
-err_reg:
- pci_release_region(pdev, 0);
-err_dis:
- pci_disable_device(pdev);
-err:
- return ret;
-}
-
-static void __devexit
-ath5k_pci_remove(struct pci_dev *pdev)
-{
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
- ath5k_debug_finish_device(sc);
- ath5k_detach(pdev, sc->hw);
- ath5k_hw_detach(sc->ah);
- kfree(sc->ah);
- free_irq(pdev->irq, sc);
- pci_iounmap(pdev, sc->iobase);
- pci_release_region(pdev, 0);
- pci_disable_device(pdev);
- ieee80211_free_hw(sc->hw);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ath5k_pci_suspend(struct device *dev)
-{
- struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
-
- ath5k_led_off(sc);
- return 0;
-}
-
-static int ath5k_pci_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state
- */
- pci_write_config_byte(pdev, 0x41, 0);
-
- ath5k_led_enable(sc);
- return 0;
-}
-#endif /* CONFIG_PM_SLEEP */
-
-
/***********************\
* Driver Initialization *
\***********************/
@@ -772,170 +284,6 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re
return ath_reg_notifier_apply(wiphy, request, regulatory);
}
-static int
-ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
- u8 mac[ETH_ALEN] = {};
- int ret;
-
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
-
- /*
- * Check if the MAC has multi-rate retry support.
- * We do this by trying to setup a fake extended
- * descriptor. MAC's that don't have support will
- * return false w/o doing anything. MAC's that do
- * support it will return true w/o doing anything.
- */
- ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
-
- if (ret < 0)
- goto err;
- if (ret > 0)
- __set_bit(ATH_STAT_MRRETRY, sc->status);
-
- /*
- * Collect the channel list. The 802.11 layer
- * is resposible for filtering this list based
- * on settings like the phy mode and regulatory
- * domain restrictions.
- */
- ret = ath5k_setup_bands(hw);
- if (ret) {
- ATH5K_ERR(sc, "can't get channels\n");
- goto err;
- }
-
- /* NB: setup here so ath5k_rate_update is happy */
- if (test_bit(AR5K_MODE_11A, ah->ah_modes))
- ath5k_setcurmode(sc, AR5K_MODE_11A);
- else
- ath5k_setcurmode(sc, AR5K_MODE_11B);
-
- /*
- * Allocate tx+rx descriptors and populate the lists.
- */
- ret = ath5k_desc_alloc(sc, pdev);
- if (ret) {
- ATH5K_ERR(sc, "can't allocate descriptors\n");
- goto err;
- }
-
- /*
- * Allocate hardware transmit queues: one queue for
- * beacon frames and one data queue for each QoS
- * priority. Note that hw functions handle reseting
- * these queues at the needed time.
- */
- ret = ath5k_beaconq_setup(ah);
- if (ret < 0) {
- ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
- goto err_desc;
- }
- sc->bhalq = ret;
- sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
- if (IS_ERR(sc->cabq)) {
- ATH5K_ERR(sc, "can't setup cab queue\n");
- ret = PTR_ERR(sc->cabq);
- goto err_bhal;
- }
-
- sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
- if (IS_ERR(sc->txq)) {
- ATH5K_ERR(sc, "can't setup xmit queue\n");
- ret = PTR_ERR(sc->txq);
- goto err_queues;
- }
-
- tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
- tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
- tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
- tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
- tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
-
- INIT_WORK(&sc->reset_work, ath5k_reset_work);
-
- ret = ath5k_eeprom_read_mac(ah, mac);
- if (ret) {
- ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
- sc->pdev->device);
- goto err_queues;
- }
-
- SET_IEEE80211_PERM_ADDR(hw, mac);
- /* All MAC address bits matter for ACKs */
- memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
- ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
-
- regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
- ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
- if (ret) {
- ATH5K_ERR(sc, "can't initialize regulatory system\n");
- goto err_queues;
- }
-
- ret = ieee80211_register_hw(hw);
- if (ret) {
- ATH5K_ERR(sc, "can't register ieee80211 hw\n");
- goto err_queues;
- }
-
- if (!ath_is_world_regd(regulatory))
- regulatory_hint(hw->wiphy, regulatory->alpha2);
-
- ath5k_init_leds(sc);
-
- ath5k_sysfs_register(sc);
-
- return 0;
-err_queues:
- ath5k_txq_release(sc);
-err_bhal:
- ath5k_hw_release_tx_queue(ah, sc->bhalq);
-err_desc:
- ath5k_desc_free(sc, pdev);
-err:
- return ret;
-}
-
-static void
-ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
-
- /*
- * NB: the order of these is important:
- * o call the 802.11 layer before detaching ath5k_hw to
- * insure callbacks into the driver to delete global
- * key cache entries can be handled
- * o reclaim the tx queue data structures after calling
- * the 802.11 layer as we'll get called back to reclaim
- * node state and potentially want to use them
- * o to cleanup the tx queues the hal is called, so detach
- * it last
- * XXX: ??? detach ath5k_hw ???
- * Other than that, it's straightforward...
- */
- ieee80211_unregister_hw(hw);
- ath5k_desc_free(sc, pdev);
- ath5k_txq_release(sc);
- ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
- ath5k_unregister_leds(sc);
-
- ath5k_sysfs_unregister(sc);
- /*
- * NB: can't reclaim these until after ieee80211_ifdetach
- * returns because we'll get called back to reclaim node
- * state and potentially want to use them.
- */
-}
-
-
-
-
/********************\
* Channel/mode setup *
\********************/
@@ -1163,8 +511,101 @@ ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
}
}
+struct ath_vif_iter_data {
+ const u8 *hw_macaddr;
+ u8 mask[ETH_ALEN];
+ u8 active_mac[ETH_ALEN]; /* first active MAC */
+ bool need_set_hw_addr;
+ bool found_active;
+ bool any_assoc;
+ enum nl80211_iftype opmode;
+};
+
+static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath_vif_iter_data *iter_data = data;
+ int i;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+
+ if (iter_data->hw_macaddr)
+ for (i = 0; i < ETH_ALEN; i++)
+ iter_data->mask[i] &=
+ ~(iter_data->hw_macaddr[i] ^ mac[i]);
+
+ if (!iter_data->found_active) {
+ iter_data->found_active = true;
+ memcpy(iter_data->active_mac, mac, ETH_ALEN);
+ }
+
+ if (iter_data->need_set_hw_addr && iter_data->hw_macaddr)
+ if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0)
+ iter_data->need_set_hw_addr = false;
+
+ if (!iter_data->any_assoc) {
+ if (avf->assoc)
+ iter_data->any_assoc = true;
+ }
+
+ /* Calculate combined mode - when APs are active, operate in AP mode.
+ * Otherwise use the mode of the new interface. This can currently
+ * only deal with combinations of APs and STAs. Only one ad-hoc
+ * interfaces is allowed above.
+ */
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ iter_data->opmode = NL80211_IFTYPE_AP;
+ else
+ if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ iter_data->opmode = avf->opmode;
+}
+
+static void ath_do_set_opmode(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ ath5k_hw_set_opmode(ah, sc->opmode);
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
+ sc->opmode, ath_opmode_to_string(sc->opmode));
+}
+
+void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath5k_hw_common(sc->ah);
+ struct ath_vif_iter_data iter_data;
+
+ /*
+ * Use the hardware MAC address as reference, the hardware uses it
+ * together with the BSSID mask when matching addresses.
+ */
+ iter_data.hw_macaddr = common->macaddr;
+ memset(&iter_data.mask, 0xff, ETH_ALEN);
+ iter_data.found_active = false;
+ iter_data.need_set_hw_addr = true;
+ iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED;
+
+ if (vif)
+ ath_vif_iter(&iter_data, vif->addr, vif);
+
+ /* Get list of all active MAC addresses */
+ ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter,
+ &iter_data);
+ memcpy(sc->bssidmask, iter_data.mask, ETH_ALEN);
+
+ sc->opmode = iter_data.opmode;
+ if (sc->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ /* Nothing active, default to station mode */
+ sc->opmode = NL80211_IFTYPE_STATION;
+
+ ath_do_set_opmode(sc);
+
+ if (iter_data.need_set_hw_addr && iter_data.found_active)
+ ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac);
+
+ if (ath5k_hw_hasbssidmask(sc->ah))
+ ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
+}
+
static void
-ath5k_mode_setup(struct ath5k_softc *sc)
+ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif)
{
struct ath5k_hw *ah = sc->ah;
u32 rfilt;
@@ -1172,15 +613,9 @@ ath5k_mode_setup(struct ath5k_softc *sc)
/* configure rx filter */
rfilt = sc->filter_flags;
ath5k_hw_set_rx_filter(ah, rfilt);
-
- if (ath5k_hw_hasbssidmask(ah))
- ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
-
- /* configure operational mode */
- ath5k_hw_set_opmode(ah, sc->opmode);
-
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode);
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
+
+ ath5k_update_bssid_mask_and_opmode(sc, vif);
}
static inline int
@@ -1352,13 +787,13 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
flags |= AR5K_TXDESC_RTSENA;
cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
- sc->vif, pktlen, info));
+ info->control.vif, pktlen, info));
}
if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
flags |= AR5K_TXDESC_CTSENA;
cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
- sc->vif, pktlen, info));
+ info->control.vif, pktlen, info));
}
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
ieee80211_get_hdrlen_from_skb(skb), padsize,
@@ -1391,6 +826,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
spin_lock_bh(&txq->lock);
list_add_tail(&bf->list, &txq->q);
+ txq->txq_len++;
if (txq->link == NULL) /* is this first packet? */
ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
else /* no, so only link it */
@@ -1459,10 +895,13 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
list_add_tail(&bf->list, &sc->txbuf);
}
- /* beacon buffer */
- bf->desc = ds;
- bf->daddr = da;
- sc->bbuf = bf;
+ /* beacon buffers */
+ INIT_LIST_HEAD(&sc->bcbuf);
+ for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &sc->bcbuf);
+ }
return 0;
err_free:
@@ -1477,11 +916,12 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
{
struct ath5k_buf *bf;
- ath5k_txbuf_free_skb(sc, sc->bbuf);
list_for_each_entry(bf, &sc->txbuf, list)
ath5k_txbuf_free_skb(sc, bf);
list_for_each_entry(bf, &sc->rxbuf, list)
ath5k_rxbuf_free_skb(sc, bf);
+ list_for_each_entry(bf, &sc->bcbuf, list)
+ ath5k_txbuf_free_skb(sc, bf);
/* Free memory associated with all descriptors */
pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
@@ -1490,13 +930,9 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
kfree(sc->bufptr);
sc->bufptr = NULL;
- sc->bbuf = NULL;
}
-
-
-
/**************\
* Queues setup *
\**************/
@@ -1509,16 +945,18 @@ ath5k_txq_setup(struct ath5k_softc *sc,
struct ath5k_txq *txq;
struct ath5k_txq_info qi = {
.tqi_subtype = subtype,
- .tqi_aifs = AR5K_TXQ_USEDEFAULT,
- .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
- .tqi_cw_max = AR5K_TXQ_USEDEFAULT
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX
};
int qnum;
/*
* Enable interrupts only for EOL and DESC conditions.
* We mark tx descriptors to receive a DESC interrupt
- * when a tx queue gets deep; otherwise waiting for the
+ * when a tx queue gets deep; otherwise we wait for the
* EOL to reap descriptors. Note that this is done to
* reduce interrupt load and this only defers reaping
* descriptors, never transmitting frames. Aside from
@@ -1550,6 +988,9 @@ ath5k_txq_setup(struct ath5k_softc *sc,
INIT_LIST_HEAD(&txq->q);
spin_lock_init(&txq->lock);
txq->setup = true;
+ txq->txq_len = 0;
+ txq->txq_poll_mark = false;
+ txq->txq_stuck = 0;
}
return &sc->txqs[qnum];
}
@@ -1558,9 +999,11 @@ static int
ath5k_beaconq_setup(struct ath5k_hw *ah)
{
struct ath5k_txq_info qi = {
- .tqi_aifs = AR5K_TXQ_USEDEFAULT,
- .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
- .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX,
/* NB: for dynamic turbo, don't enable any other interrupts */
.tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
};
@@ -1594,7 +1037,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
*/
qi.tqi_aifs = 0;
qi.tqi_cw_min = 0;
- qi.tqi_cw_max = 2 * ah->ah_cw_min;
+ qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN;
}
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
@@ -1644,9 +1087,11 @@ ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
spin_lock_bh(&sc->txbuflock);
list_move_tail(&bf->list, &sc->txbuf);
sc->txbuf_len++;
+ txq->txq_len--;
spin_unlock_bh(&sc->txbuflock);
}
txq->link = NULL;
+ txq->txq_poll_mark = false;
spin_unlock_bh(&txq->lock);
}
@@ -1696,8 +1141,6 @@ ath5k_txq_release(struct ath5k_softc *sc)
}
-
-
/*************\
* RX Handling *
\*************/
@@ -1713,7 +1156,7 @@ ath5k_rx_start(struct ath5k_softc *sc)
struct ath5k_buf *bf;
int ret;
- common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz);
+ common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
common->cachelsz, common->rx_bufsize);
@@ -1732,7 +1175,7 @@ ath5k_rx_start(struct ath5k_softc *sc)
spin_unlock_bh(&sc->rxbuflock);
ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
- ath5k_mode_setup(sc); /* set filters, etc. */
+ ath5k_mode_setup(sc, NULL); /* set filters, etc. */
ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
return 0;
@@ -1840,6 +1283,15 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
*/
if (hw_tu >= sc->nexttbtt)
ath5k_beacon_update_timers(sc, bc_tstamp);
+
+ /* Check if the beacon timers are still correct, because a TSF
+ * update might have created a window between them - for a
+ * longer description see the comment of this function: */
+ if (!ath5k_hw_check_beacon_timers(sc->ah, sc->bintval)) {
+ ath5k_beacon_update_timers(sc, bc_tstamp);
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "fixed beacon timers after beacon receive\n");
+ }
}
}
@@ -1863,7 +1315,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
}
/*
- * Compute padding position. skb must contains an IEEE 802.11 frame
+ * Compute padding position. skb must contain an IEEE 802.11 frame
*/
static int ath5k_common_padpos(struct sk_buff *skb)
{
@@ -1882,10 +1334,9 @@ static int ath5k_common_padpos(struct sk_buff *skb)
}
/*
- * This function expects a 802.11 frame and returns the number of
- * bytes added, or -1 if we don't have enought header room.
+ * This function expects an 802.11 frame and returns the number of
+ * bytes added, or -1 if we don't have enough header room.
*/
-
static int ath5k_add_padding(struct sk_buff *skb)
{
int padpos = ath5k_common_padpos(skb);
@@ -1905,10 +1356,18 @@ static int ath5k_add_padding(struct sk_buff *skb)
}
/*
- * This function expects a 802.11 frame and returns the number of
- * bytes removed
+ * The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = 4 - (hdrlen & 3); however, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. We must not try to
+ * remove padding from short control frames that do not have a
+ * payload.
+ *
+ * This function expects an 802.11 frame and returns the number of
+ * bytes removed.
*/
-
static int ath5k_remove_padding(struct sk_buff *skb)
{
int padpos = ath5k_common_padpos(skb);
@@ -1929,14 +1388,6 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
{
struct ieee80211_rx_status *rxs;
- /* The MAC header is padded to have 32-bit boundary if the
- * packet payload is non-zero. The general calculation for
- * padsize would take into account odd header lengths:
- * padsize = (4 - hdrlen % 4) % 4; However, since only
- * even-length headers are used, padding can only be 0 or 2
- * bytes and we can optimize this a bit. In addition, we must
- * not try to remove padding from short control frames that do
- * not have payload. */
ath5k_remove_padding(skb);
rxs = IEEE80211_SKB_RXCB(skb);
@@ -2007,6 +1458,7 @@ static bool
ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
{
sc->stats.rx_all_count++;
+ sc->stats.rx_bytes_count += rs->rs_datalen;
if (unlikely(rs->rs_status)) {
if (rs->rs_status & AR5K_RXERR_CRC)
@@ -2040,9 +1492,8 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
return true;
}
- /* let crypto-error packets fall through in MNTR */
- if ((rs->rs_status & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
- sc->opmode != NL80211_IFTYPE_MONITOR)
+ /* reject any frames with non-crypto errors */
+ if (rs->rs_status & ~(AR5K_RXERR_DECRYPT))
return false;
}
@@ -2123,6 +1574,118 @@ unlock:
* TX Handling *
\*************/
+static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_buf *bf;
+ unsigned long flags;
+ int padsize;
+
+ ath5k_debug_dump_skb(sc, skb, "TX ", 1);
+
+ /*
+ * The hardware expects the header padded to 4 byte boundaries.
+ * If this is not the case, we add the padding after the header.
+ */
+ padsize = ath5k_add_padding(skb);
+ if (padsize < 0) {
+ ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
+ " headroom to pad");
+ goto drop_packet;
+ }
+
+ if (txq->txq_len >= ATH5K_TXQ_LEN_MAX)
+ ieee80211_stop_queue(hw, txq->qnum);
+
+ spin_lock_irqsave(&sc->txbuflock, flags);
+ if (list_empty(&sc->txbuf)) {
+ ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+ ieee80211_stop_queues(hw);
+ goto drop_packet;
+ }
+ bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
+ list_del(&bf->list);
+ sc->txbuf_len--;
+ if (list_empty(&sc->txbuf))
+ ieee80211_stop_queues(hw);
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+
+ bf->skb = skb;
+
+ if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
+ bf->skb = NULL;
+ spin_lock_irqsave(&sc->txbuflock, flags);
+ list_add_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+ goto drop_packet;
+ }
+ return NETDEV_TX_OK;
+
+drop_packet:
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+static void
+ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb,
+ struct ath5k_tx_status *ts)
+{
+ struct ieee80211_tx_info *info;
+ int i;
+
+ sc->stats.tx_all_count++;
+ sc->stats.tx_bytes_count += skb->len;
+ info = IEEE80211_SKB_CB(skb);
+
+ ieee80211_tx_info_clear_status(info);
+ for (i = 0; i < 4; i++) {
+ struct ieee80211_tx_rate *r =
+ &info->status.rates[i];
+
+ if (ts->ts_rate[i]) {
+ r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]);
+ r->count = ts->ts_retry[i];
+ } else {
+ r->idx = -1;
+ r->count = 0;
+ }
+ }
+
+ /* count the successful attempt as well */
+ info->status.rates[ts->ts_final_idx].count++;
+
+ if (unlikely(ts->ts_status)) {
+ sc->stats.ack_fail++;
+ if (ts->ts_status & AR5K_TXERR_FILT) {
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ sc->stats.txerr_filt++;
+ }
+ if (ts->ts_status & AR5K_TXERR_XRETRY)
+ sc->stats.txerr_retry++;
+ if (ts->ts_status & AR5K_TXERR_FIFO)
+ sc->stats.txerr_fifo++;
+ } else {
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->status.ack_signal = ts->ts_rssi;
+ }
+
+ /*
+ * Remove MAC header padding before giving the frame
+ * back to mac80211.
+ */
+ ath5k_remove_padding(skb);
+
+ if (ts->ts_antenna > 0 && ts->ts_antenna < 5)
+ sc->stats.antenna_tx[ts->ts_antenna]++;
+ else
+ sc->stats.antenna_tx[0]++; /* invalid */
+
+ ieee80211_tx_status(sc->hw, skb);
+}
+
static void
ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
{
@@ -2130,96 +1693,51 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
struct ath5k_buf *bf, *bf0;
struct ath5k_desc *ds;
struct sk_buff *skb;
- struct ieee80211_tx_info *info;
- int i, ret;
+ int ret;
spin_lock(&txq->lock);
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
- ds = bf->desc;
- /*
- * It's possible that the hardware can say the buffer is
- * completed when it hasn't yet loaded the ds_link from
- * host memory and moved on. If there are more TX
- * descriptors in the queue, wait for TXDP to change
- * before processing this one.
- */
- if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr &&
- !list_is_last(&bf->list, &txq->q))
- break;
+ txq->txq_poll_mark = false;
- ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
- if (unlikely(ret == -EINPROGRESS))
- break;
- else if (unlikely(ret)) {
- ATH5K_ERR(sc, "error %d while processing queue %u\n",
- ret, txq->qnum);
- break;
- }
-
- sc->stats.tx_all_count++;
- skb = bf->skb;
- info = IEEE80211_SKB_CB(skb);
- bf->skb = NULL;
-
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
- PCI_DMA_TODEVICE);
+ /* skb might already have been processed last time. */
+ if (bf->skb != NULL) {
+ ds = bf->desc;
- ieee80211_tx_info_clear_status(info);
- for (i = 0; i < 4; i++) {
- struct ieee80211_tx_rate *r =
- &info->status.rates[i];
-
- if (ts.ts_rate[i]) {
- r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
- r->count = ts.ts_retry[i];
- } else {
- r->idx = -1;
- r->count = 0;
+ ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(sc,
+ "error %d while processing "
+ "queue %u\n", ret, txq->qnum);
+ break;
}
- }
- /* count the successful attempt as well */
- info->status.rates[ts.ts_final_idx].count++;
-
- if (unlikely(ts.ts_status)) {
- sc->stats.ack_fail++;
- if (ts.ts_status & AR5K_TXERR_FILT) {
- info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
- sc->stats.txerr_filt++;
- }
- if (ts.ts_status & AR5K_TXERR_XRETRY)
- sc->stats.txerr_retry++;
- if (ts.ts_status & AR5K_TXERR_FIFO)
- sc->stats.txerr_fifo++;
- } else {
- info->flags |= IEEE80211_TX_STAT_ACK;
- info->status.ack_signal = ts.ts_rssi;
+ skb = bf->skb;
+ bf->skb = NULL;
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
+ PCI_DMA_TODEVICE);
+ ath5k_tx_frame_completed(sc, skb, &ts);
}
/*
- * Remove MAC header padding before giving the frame
- * back to mac80211.
+ * It's possible that the hardware can say the buffer is
+ * completed when it hasn't yet loaded the ds_link from
+ * host memory and moved on.
+ * Always keep the last descriptor to avoid HW races...
*/
- ath5k_remove_padding(skb);
-
- if (ts.ts_antenna > 0 && ts.ts_antenna < 5)
- sc->stats.antenna_tx[ts.ts_antenna]++;
- else
- sc->stats.antenna_tx[0]++; /* invalid */
-
- ieee80211_tx_status(sc->hw, skb);
-
- spin_lock(&sc->txbuflock);
- list_move_tail(&bf->list, &sc->txbuf);
- sc->txbuf_len++;
- spin_unlock(&sc->txbuflock);
+ if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) {
+ spin_lock(&sc->txbuflock);
+ list_move_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock(&sc->txbuflock);
+ }
}
- if (likely(list_empty(&txq->q)))
- txq->link = NULL;
spin_unlock(&txq->lock);
- if (sc->txbuf_len > ATH_TXBUF / 5)
- ieee80211_wake_queues(sc->hw);
+ if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4)
+ ieee80211_wake_queue(sc->hw, txq->qnum);
}
static void
@@ -2285,10 +1803,11 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
* default antenna which is supposed to be an omni.
*
* Note2: On sectored scenarios it's possible to have
- * multiple antennas (1omni -the default- and 14 sectors)
- * so if we choose to actually support this mode we need
- * to allow user to set how many antennas we have and tweak
- * the code below to send beacons on all of them.
+ * multiple antennas (1 omni -- the default -- and 14
+ * sectors), so if we choose to actually support this
+ * mode, we need to allow the user to set how many antennas
+ * we have and tweak the code below to send beacons
+ * on all of them.
*/
if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
antenna = sc->bsent & 4 ? 2 : 1;
@@ -2314,6 +1833,44 @@ err_unmap:
}
/*
+ * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
+ * this is called only once at config_bss time, for AP we do it every
+ * SWBA interrupt so that the TIM will reflect buffered frames.
+ *
+ * Called with the beacon lock.
+ */
+static int
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ int ret;
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+ struct sk_buff *skb;
+
+ if (WARN_ON(!vif)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ skb = ieee80211_beacon_get(hw, vif);
+
+ if (!skb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ath5k_debug_dump_skb(sc, skb, "BC ", 1);
+
+ ath5k_txbuf_free_skb(sc, avf->bbuf);
+ avf->bbuf->skb = skb;
+ ret = ath5k_beacon_setup(sc, avf->bbuf);
+ if (ret)
+ avf->bbuf->skb = NULL;
+out:
+ return ret;
+}
+
+/*
* Transmit a beacon frame at SWBA. Dynamic updates to the
* frame contents are done as needed and the slot time is
* also adjusted based on current state.
@@ -2324,20 +1881,17 @@ err_unmap:
static void
ath5k_beacon_send(struct ath5k_softc *sc)
{
- struct ath5k_buf *bf = sc->bbuf;
struct ath5k_hw *ah = sc->ah;
+ struct ieee80211_vif *vif;
+ struct ath5k_vif *avf;
+ struct ath5k_buf *bf;
struct sk_buff *skb;
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
- if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
- sc->opmode == NL80211_IFTYPE_MONITOR)) {
- ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
- return;
- }
/*
* Check if the previous beacon has gone out. If
- * not don't don't try to post another, skip this
+ * not, don't don't try to post another: skip this
* period and wait for the next. Missed beacons
* indicate a problem and should not occur. If we
* miss too many consecutive beacons reset the device.
@@ -2363,6 +1917,28 @@ ath5k_beacon_send(struct ath5k_softc *sc)
sc->bmisscount = 0;
}
+ if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+ u32 tsftu = TSF_TO_TU(tsf);
+ int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
+ vif = sc->bslot[(slot + 1) % ATH_BCBUF];
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "tsf %llx tsftu %x intval %u slot %u vif %p\n",
+ (unsigned long long)tsf, tsftu, sc->bintval, slot, vif);
+ } else /* only one interface */
+ vif = sc->bslot[0];
+
+ if (!vif)
+ return;
+
+ avf = (void *)vif->drv_priv;
+ bf = avf->bbuf;
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
+ ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
+ return;
+ }
+
/*
* Stop any current dma and put the new frame on the queue.
* This should never fail since we check above that no frames
@@ -2375,23 +1951,22 @@ ath5k_beacon_send(struct ath5k_softc *sc)
/* refresh the beacon for AP mode */
if (sc->opmode == NL80211_IFTYPE_AP)
- ath5k_beacon_update(sc->hw, sc->vif);
+ ath5k_beacon_update(sc->hw, vif);
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
ath5k_hw_start_tx_dma(ah, sc->bhalq);
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
- skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
+ skb = ieee80211_get_buffered_bc(sc->hw, vif);
while (skb) {
ath5k_tx_queue(sc->hw, skb, sc->cabq);
- skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
+ skb = ieee80211_get_buffered_bc(sc->hw, vif);
}
sc->bsent++;
}
-
/**
* ath5k_beacon_update_timers - update beacon timers
*
@@ -2416,6 +1991,12 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
u64 hw_tsf;
intval = sc->bintval & AR5K_BEACON_PERIOD;
+ if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+ intval /= ATH_BCBUF; /* staggered multi-bss beacons */
+ if (intval < 15)
+ ATH5K_WARN(sc, "intval %u is too low, min 15\n",
+ intval);
+ }
if (WARN_ON(!intval))
return;
@@ -2426,8 +2007,11 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
hw_tsf = ath5k_hw_get_tsf64(ah);
hw_tu = TSF_TO_TU(hw_tsf);
-#define FUDGE 3
- /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
+#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
+ /* We use FUDGE to make sure the next TBTT is ahead of the current TU.
+ * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+ * configuration we need to make sure it is bigger than that. */
+
if (bc_tsf == -1) {
/*
* no beacons received, called internally.
@@ -2493,7 +2077,6 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
}
-
/**
* ath5k_beacon_config - Configure the beacon queues and interrupts
*
@@ -2572,155 +2155,6 @@ static void ath5k_tasklet_beacon(unsigned long data)
* Interrupt handling *
\********************/
-static int
-ath5k_init(struct ath5k_softc *sc)
-{
- struct ath5k_hw *ah = sc->ah;
- int ret, i;
-
- mutex_lock(&sc->lock);
-
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
-
- /*
- * Stop anything previously setup. This is safe
- * no matter this is the first time through or not.
- */
- ath5k_stop_locked(sc);
-
- /*
- * The basic interface to setting the hardware in a good
- * state is ``reset''. On return the hardware is known to
- * be powered up and with interrupts disabled. This must
- * be followed by initialization of the appropriate bits
- * and then setup of the interrupt mask.
- */
- sc->curchan = sc->hw->conf.channel;
- sc->curband = &sc->sbands[sc->curchan->band];
- sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
- AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
- AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
-
- ret = ath5k_reset(sc, NULL);
- if (ret)
- goto done;
-
- ath5k_rfkill_hw_start(ah);
-
- /*
- * Reset the key cache since some parts do not reset the
- * contents on initial power up or resume from suspend.
- */
- for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
- ath5k_hw_reset_key(ah, i);
-
- ath5k_hw_set_ack_bitrate_high(ah, true);
- ret = 0;
-done:
- mmiowb();
- mutex_unlock(&sc->lock);
- return ret;
-}
-
-static int
-ath5k_stop_locked(struct ath5k_softc *sc)
-{
- struct ath5k_hw *ah = sc->ah;
-
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
- test_bit(ATH_STAT_INVALID, sc->status));
-
- /*
- * Shutdown the hardware and driver:
- * stop output from above
- * disable interrupts
- * turn off timers
- * turn off the radio
- * clear transmit machinery
- * clear receive machinery
- * drain and release tx queues
- * reclaim beacon resources
- * power down hardware
- *
- * Note that some of this work is not possible if the
- * hardware is gone (invalid).
- */
- ieee80211_stop_queues(sc->hw);
-
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
- ath5k_led_off(sc);
- ath5k_hw_set_imr(ah, 0);
- synchronize_irq(sc->pdev->irq);
- }
- ath5k_txq_cleanup(sc);
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
- ath5k_rx_stop(sc);
- ath5k_hw_phy_disable(ah);
- }
-
- return 0;
-}
-
-static void stop_tasklets(struct ath5k_softc *sc)
-{
- tasklet_kill(&sc->rxtq);
- tasklet_kill(&sc->txtq);
- tasklet_kill(&sc->calib);
- tasklet_kill(&sc->beacontq);
- tasklet_kill(&sc->ani_tasklet);
-}
-
-/*
- * Stop the device, grabbing the top-level lock to protect
- * against concurrent entry through ath5k_init (which can happen
- * if another thread does a system call and the thread doing the
- * stop is preempted).
- */
-static int
-ath5k_stop_hw(struct ath5k_softc *sc)
-{
- int ret;
-
- mutex_lock(&sc->lock);
- ret = ath5k_stop_locked(sc);
- if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
- /*
- * Don't set the card in full sleep mode!
- *
- * a) When the device is in this state it must be carefully
- * woken up or references to registers in the PCI clock
- * domain may freeze the bus (and system). This varies
- * by chip and is mostly an issue with newer parts
- * (madwifi sources mentioned srev >= 0x78) that go to
- * sleep more quickly.
- *
- * b) On older chips full sleep results a weird behaviour
- * during wakeup. I tested various cards with srev < 0x78
- * and they don't wake up after module reload, a second
- * module reload is needed to bring the card up again.
- *
- * Until we figure out what's going on don't enable
- * full chip reset on any chip (this is what Legacy HAL
- * and Sam's HAL do anyway). Instead Perform a full reset
- * on the device (same as initial state after attach) and
- * leave it idle (keep MAC/BB on warm reset) */
- ret = ath5k_hw_on_hold(sc->ah);
-
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
- "putting device to sleep\n");
- }
- ath5k_txbuf_free_skb(sc, sc->bbuf);
-
- mmiowb();
- mutex_unlock(&sc->lock);
-
- stop_tasklets(sc);
-
- ath5k_rfkill_hw_stop(sc->ah);
-
- return ret;
-}
-
static void
ath5k_intr_calibration_poll(struct ath5k_hw *ah)
{
@@ -2857,14 +2291,13 @@ ath5k_tasklet_calibrate(unsigned long data)
sc->curchan->center_freq));
/* Noise floor calibration interrupts rx/tx path while I/Q calibration
- * doesn't. We stop the queues so that calibration doesn't interfere
- * with TX and don't run it as often */
+ * doesn't.
+ * TODO: We should stop TX here, so that it doesn't interfere.
+ * Note that stopping the queues is not enough to stop TX! */
if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
ah->ah_cal_next_nf = jiffies +
msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
- ieee80211_stop_queues(sc->hw);
ath5k_hw_update_noise_floor(ah);
- ieee80211_wake_queues(sc->hw);
}
ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
@@ -2883,71 +2316,208 @@ ath5k_tasklet_ani(unsigned long data)
}
-/********************\
-* Mac80211 functions *
-\********************/
+static void
+ath5k_tx_complete_poll_work(struct work_struct *work)
+{
+ struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
+ tx_complete_work.work);
+ struct ath5k_txq *txq;
+ int i;
+ bool needreset = false;
+
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
+ if (sc->txqs[i].setup) {
+ txq = &sc->txqs[i];
+ spin_lock_bh(&txq->lock);
+ if (txq->txq_len > 1) {
+ if (txq->txq_poll_mark) {
+ ATH5K_DBG(sc, ATH5K_DEBUG_XMIT,
+ "TX queue stuck %d\n",
+ txq->qnum);
+ needreset = true;
+ txq->txq_stuck++;
+ spin_unlock_bh(&txq->lock);
+ break;
+ } else {
+ txq->txq_poll_mark = true;
+ }
+ }
+ spin_unlock_bh(&txq->lock);
+ }
+ }
+
+ if (needreset) {
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+ "TX queues stuck, resetting\n");
+ ath5k_reset(sc, sc->curchan);
+ }
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+}
+
+
+/*************************\
+* Initialization routines *
+\*************************/
static int
-ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+ath5k_stop_locked(struct ath5k_softc *sc)
{
- struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
+ test_bit(ATH_STAT_INVALID, sc->status));
+
+ /*
+ * Shutdown the hardware and driver:
+ * stop output from above
+ * disable interrupts
+ * turn off timers
+ * turn off the radio
+ * clear transmit machinery
+ * clear receive machinery
+ * drain and release tx queues
+ * reclaim beacon resources
+ * power down hardware
+ *
+ * Note that some of this work is not possible if the
+ * hardware is gone (invalid).
+ */
+ ieee80211_stop_queues(sc->hw);
- return ath5k_tx_queue(hw, skb, sc->txq);
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+ ath5k_led_off(sc);
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(sc->pdev->irq);
+ }
+ ath5k_txq_cleanup(sc);
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+ ath5k_rx_stop(sc);
+ ath5k_hw_phy_disable(ah);
+ }
+
+ return 0;
}
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ath5k_txq *txq)
+static int
+ath5k_init(struct ath5k_softc *sc)
{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_buf *bf;
- unsigned long flags;
- int padsize;
+ struct ath5k_hw *ah = sc->ah;
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, i;
- ath5k_debug_dump_skb(sc, skb, "TX ", 1);
+ mutex_lock(&sc->lock);
- if (sc->opmode == NL80211_IFTYPE_MONITOR)
- ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
/*
- * the hardware expects the header padded to 4 byte boundaries
- * if this is not the case we add the padding after the header
+ * Stop anything previously setup. This is safe
+ * no matter this is the first time through or not.
*/
- padsize = ath5k_add_padding(skb);
- if (padsize < 0) {
- ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
- " headroom to pad");
- goto drop_packet;
- }
+ ath5k_stop_locked(sc);
- spin_lock_irqsave(&sc->txbuflock, flags);
- if (list_empty(&sc->txbuf)) {
- ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
- spin_unlock_irqrestore(&sc->txbuflock, flags);
- ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
- goto drop_packet;
- }
- bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
- list_del(&bf->list);
- sc->txbuf_len--;
- if (list_empty(&sc->txbuf))
- ieee80211_stop_queues(hw);
- spin_unlock_irqrestore(&sc->txbuflock, flags);
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ sc->curchan = sc->hw->conf.channel;
+ sc->curband = &sc->sbands[sc->curchan->band];
+ sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
+ AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
- bf->skb = skb;
+ ret = ath5k_reset(sc, NULL);
+ if (ret)
+ goto done;
- if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
- bf->skb = NULL;
- spin_lock_irqsave(&sc->txbuflock, flags);
- list_add_tail(&bf->list, &sc->txbuf);
- sc->txbuf_len++;
- spin_unlock_irqrestore(&sc->txbuflock, flags);
- goto drop_packet;
+ ath5k_rfkill_hw_start(ah);
+
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < common->keymax; i++)
+ ath_hw_keyreset(common, (u16) i);
+
+ ath5k_hw_set_ack_bitrate_high(ah, true);
+
+ for (i = 0; i < ARRAY_SIZE(sc->bslot); i++)
+ sc->bslot[i] = NULL;
+
+ ret = 0;
+done:
+ mmiowb();
+ mutex_unlock(&sc->lock);
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+
+ return ret;
+}
+
+static void stop_tasklets(struct ath5k_softc *sc)
+{
+ tasklet_kill(&sc->rxtq);
+ tasklet_kill(&sc->txtq);
+ tasklet_kill(&sc->calib);
+ tasklet_kill(&sc->beacontq);
+ tasklet_kill(&sc->ani_tasklet);
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath5k_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+static int
+ath5k_stop_hw(struct ath5k_softc *sc)
+{
+ int ret;
+
+ mutex_lock(&sc->lock);
+ ret = ath5k_stop_locked(sc);
+ if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
+ /*
+ * Don't set the card in full sleep mode!
+ *
+ * a) When the device is in this state it must be carefully
+ * woken up or references to registers in the PCI clock
+ * domain may freeze the bus (and system). This varies
+ * by chip and is mostly an issue with newer parts
+ * (madwifi sources mentioned srev >= 0x78) that go to
+ * sleep more quickly.
+ *
+ * b) On older chips full sleep results a weird behaviour
+ * during wakeup. I tested various cards with srev < 0x78
+ * and they don't wake up after module reload, a second
+ * module reload is needed to bring the card up again.
+ *
+ * Until we figure out what's going on don't enable
+ * full chip reset on any chip (this is what Legacy HAL
+ * and Sam's HAL do anyway). Instead Perform a full reset
+ * on the device (same as initial state after attach) and
+ * leave it idle (keep MAC/BB on warm reset) */
+ ret = ath5k_hw_on_hold(sc->ah);
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+ "putting device to sleep\n");
}
- return NETDEV_TX_OK;
-drop_packet:
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
+ mmiowb();
+ mutex_unlock(&sc->lock);
+
+ stop_tasklets(sc);
+
+ cancel_delayed_work_sync(&sc->tx_complete_work);
+
+ ath5k_rfkill_hw_stop(sc->ah);
+
+ return ret;
}
/*
@@ -3024,6 +2594,208 @@ static void ath5k_reset_work(struct work_struct *work)
mutex_unlock(&sc->lock);
}
+static int
+ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+ struct ath5k_txq *txq;
+ u8 mac[ETH_ALEN] = {};
+ int ret;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
+
+ /*
+ * Check if the MAC has multi-rate retry support.
+ * We do this by trying to setup a fake extended
+ * descriptor. MACs that don't have support will
+ * return false w/o doing anything. MACs that do
+ * support it will return true w/o doing anything.
+ */
+ ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+
+ if (ret < 0)
+ goto err;
+ if (ret > 0)
+ __set_bit(ATH_STAT_MRRETRY, sc->status);
+
+ /*
+ * Collect the channel list. The 802.11 layer
+ * is resposible for filtering this list based
+ * on settings like the phy mode and regulatory
+ * domain restrictions.
+ */
+ ret = ath5k_setup_bands(hw);
+ if (ret) {
+ ATH5K_ERR(sc, "can't get channels\n");
+ goto err;
+ }
+
+ /* NB: setup here so ath5k_rate_update is happy */
+ if (test_bit(AR5K_MODE_11A, ah->ah_modes))
+ ath5k_setcurmode(sc, AR5K_MODE_11A);
+ else
+ ath5k_setcurmode(sc, AR5K_MODE_11B);
+
+ /*
+ * Allocate tx+rx descriptors and populate the lists.
+ */
+ ret = ath5k_desc_alloc(sc, pdev);
+ if (ret) {
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
+ goto err;
+ }
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that hw functions handle resetting
+ * these queues at the needed time.
+ */
+ ret = ath5k_beaconq_setup(ah);
+ if (ret < 0) {
+ ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
+ goto err_desc;
+ }
+ sc->bhalq = ret;
+ sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
+ if (IS_ERR(sc->cabq)) {
+ ATH5K_ERR(sc, "can't setup cab queue\n");
+ ret = PTR_ERR(sc->cabq);
+ goto err_bhal;
+ }
+
+ /* This order matches mac80211's queue priority, so we can
+ * directly use the mac80211 queue number without any mapping */
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 4;
+
+ tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
+ tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
+ tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
+ tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
+ tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
+
+ INIT_WORK(&sc->reset_work, ath5k_reset_work);
+ INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work);
+
+ ret = ath5k_eeprom_read_mac(ah, mac);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+ sc->pdev->device);
+ goto err_queues;
+ }
+
+ SET_IEEE80211_PERM_ADDR(hw, mac);
+ memcpy(&sc->lladdr, mac, ETH_ALEN);
+ /* All MAC address bits matter for ACKs */
+ ath5k_update_bssid_mask_and_opmode(sc, NULL);
+
+ regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
+ ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
+ if (ret) {
+ ATH5K_ERR(sc, "can't initialize regulatory system\n");
+ goto err_queues;
+ }
+
+ ret = ieee80211_register_hw(hw);
+ if (ret) {
+ ATH5K_ERR(sc, "can't register ieee80211 hw\n");
+ goto err_queues;
+ }
+
+ if (!ath_is_world_regd(regulatory))
+ regulatory_hint(hw->wiphy, regulatory->alpha2);
+
+ ath5k_init_leds(sc);
+
+ ath5k_sysfs_register(sc);
+
+ return 0;
+err_queues:
+ ath5k_txq_release(sc);
+err_bhal:
+ ath5k_hw_release_tx_queue(ah, sc->bhalq);
+err_desc:
+ ath5k_desc_free(sc, pdev);
+err:
+ return ret;
+}
+
+static void
+ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ /*
+ * NB: the order of these is important:
+ * o call the 802.11 layer before detaching ath5k_hw to
+ * ensure callbacks into the driver to delete global
+ * key cache entries can be handled
+ * o reclaim the tx queue data structures after calling
+ * the 802.11 layer as we'll get called back to reclaim
+ * node state and potentially want to use them
+ * o to cleanup the tx queues the hal is called, so detach
+ * it last
+ * XXX: ??? detach ath5k_hw ???
+ * Other than that, it's straightforward...
+ */
+ ieee80211_unregister_hw(hw);
+ ath5k_desc_free(sc, pdev);
+ ath5k_txq_release(sc);
+ ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
+ ath5k_unregister_leds(sc);
+
+ ath5k_sysfs_unregister(sc);
+ /*
+ * NB: can't reclaim these until after ieee80211_ifdetach
+ * returns because we'll get called back to reclaim node
+ * state and potentially want to use them.
+ */
+}
+
+/********************\
+* Mac80211 functions *
+\********************/
+
+static int
+ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct ath5k_softc *sc = hw->priv;
+ u16 qnum = skb_get_queue_mapping(skb);
+
+ if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
+}
+
static int ath5k_start(struct ieee80211_hw *hw)
{
return ath5k_init(hw->priv);
@@ -3039,32 +2811,78 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
{
struct ath5k_softc *sc = hw->priv;
int ret;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
mutex_lock(&sc->lock);
- if (sc->vif) {
- ret = 0;
+
+ if ((vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)
+ && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) {
+ ret = -ELNRNG;
goto end;
}
- sc->vif = vif;
+ /* Don't allow other interfaces if one ad-hoc is configured.
+ * TODO: Fix the problems with ad-hoc and multiple other interfaces.
+ * We would need to operate the HW in ad-hoc mode to allow TSF updates
+ * for the IBSS, but this breaks with additional AP or STA interfaces
+ * at the moment. */
+ if (sc->num_adhoc_vifs ||
+ (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
+ ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n");
+ ret = -ELNRNG;
+ goto end;
+ }
switch (vif->type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_MONITOR:
- sc->opmode = vif->type;
+ avf->opmode = vif->type;
break;
default:
ret = -EOPNOTSUPP;
goto end;
}
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode);
+ sc->nvifs++;
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
+
+ /* Assign the vap/adhoc to a beacon xmit slot. */
+ if ((avf->opmode == NL80211_IFTYPE_AP) ||
+ (avf->opmode == NL80211_IFTYPE_ADHOC)) {
+ int slot;
+ WARN_ON(list_empty(&sc->bcbuf));
+ avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf,
+ list);
+ list_del(&avf->bbuf->list);
+
+ avf->bslot = 0;
+ for (slot = 0; slot < ATH_BCBUF; slot++) {
+ if (!sc->bslot[slot]) {
+ avf->bslot = slot;
+ break;
+ }
+ }
+ BUG_ON(sc->bslot[avf->bslot] != NULL);
+ sc->bslot[avf->bslot] = vif;
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ sc->num_ap_vifs++;
+ else
+ sc->num_adhoc_vifs++;
+ }
+
+ /* Any MAC address is fine, all others are included through the
+ * filter.
+ */
+ memcpy(&sc->lladdr, vif->addr, ETH_ALEN);
ath5k_hw_set_lladdr(sc->ah, vif->addr);
- ath5k_mode_setup(sc);
+
+ memcpy(&avf->lladdr, vif->addr, ETH_ALEN);
+
+ ath5k_mode_setup(sc, vif);
ret = 0;
end:
@@ -3077,15 +2895,29 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath5k_softc *sc = hw->priv;
- u8 mac[ETH_ALEN] = {};
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+ unsigned int i;
mutex_lock(&sc->lock);
- if (sc->vif != vif)
- goto end;
+ sc->nvifs--;
+
+ if (avf->bbuf) {
+ ath5k_txbuf_free_skb(sc, avf->bbuf);
+ list_add_tail(&avf->bbuf->list, &sc->bcbuf);
+ for (i = 0; i < ATH_BCBUF; i++) {
+ if (sc->bslot[i] == vif) {
+ sc->bslot[i] = NULL;
+ break;
+ }
+ }
+ avf->bbuf = NULL;
+ }
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ sc->num_ap_vifs--;
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
+ sc->num_adhoc_vifs--;
- ath5k_hw_set_lladdr(sc->ah, mac);
- sc->vif = NULL;
-end:
+ ath5k_update_bssid_mask_and_opmode(sc, NULL);
mutex_unlock(&sc->lock);
}
@@ -3168,6 +3000,19 @@ static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
return ((u64)(mfilt[1]) << 32) | mfilt[0];
}
+static bool ath_any_vif_assoc(struct ath5k_softc *sc)
+{
+ struct ath_vif_iter_data iter_data;
+ iter_data.hw_macaddr = NULL;
+ iter_data.any_assoc = false;
+ iter_data.need_set_hw_addr = false;
+ iter_data.found_active = true;
+
+ ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter,
+ &iter_data);
+ return iter_data.any_assoc;
+}
+
#define SUPPORTED_FIF_FLAGS \
FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
@@ -3237,9 +3082,9 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
rfilt |= AR5K_RX_FILTER_PHYERR;
/* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
- * and probes for any BSSID, this needs testing */
- if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
- rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
+ * and probes for any BSSID */
+ if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1))
+ rfilt |= AR5K_RX_FILTER_BEACON;
/* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
* set we should only pass on control frames for this
@@ -3255,7 +3100,6 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
switch (sc->opmode) {
case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_MONITOR:
rfilt |= AR5K_RX_FILTER_CONTROL |
AR5K_RX_FILTER_BEACON |
AR5K_RX_FILTER_PROBEREQ |
@@ -3278,7 +3122,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
/* Set multicast bits */
ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
- /* Set the cached hw filter flags, this will alter actually
+ /* Set the cached hw filter flags, this will later actually
* be set in HW */
sc->filter_flags = rfilt;
@@ -3298,17 +3142,14 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (modparam_nohwcrypt)
return -EOPNOTSUPP;
- if (sc->opmode == NL80211_IFTYPE_AP)
- return -EOPNOTSUPP;
-
- switch (key->alg) {
- case ALG_WEP:
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
break;
- case ALG_CCMP:
- if (sc->ah->ah_aes_support)
+ case WLAN_CIPHER_SUITE_CCMP:
+ if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
break;
-
return -EOPNOTSUPP;
default:
WARN_ON(1);
@@ -3319,27 +3160,25 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
switch (cmd) {
case SET_KEY:
- ret = ath5k_hw_set_key(sc->ah, key->keyidx, key,
- sta ? sta->addr : NULL);
- if (ret) {
- ATH5K_ERR(sc, "can't set the key\n");
- goto unlock;
+ ret = ath_key_config(common, vif, sta, key);
+ if (ret >= 0) {
+ key->hw_key_idx = ret;
+ /* push IV and Michael MIC generation to stack */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
+ ret = 0;
}
- __set_bit(key->keyidx, common->keymap);
- key->hw_key_idx = key->keyidx;
- key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
- IEEE80211_KEY_FLAG_GENERATE_MMIC);
break;
case DISABLE_KEY:
- ath5k_hw_reset_key(sc->ah, key->keyidx);
- __clear_bit(key->keyidx, common->keymap);
+ ath_key_delete(common, key);
break;
default:
ret = -EINVAL;
- goto unlock;
}
-unlock:
mmiowb();
mutex_unlock(&sc->lock);
return ret;
@@ -3409,43 +3248,6 @@ ath5k_reset_tsf(struct ieee80211_hw *hw)
ath5k_hw_reset_tsf(sc->ah);
}
-/*
- * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
- * this is called only once at config_bss time, for AP we do it every
- * SWBA interrupt so that the TIM will reflect buffered frames.
- *
- * Called with the beacon lock.
- */
-static int
-ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- int ret;
- struct ath5k_softc *sc = hw->priv;
- struct sk_buff *skb;
-
- if (WARN_ON(!vif)) {
- ret = -EINVAL;
- goto out;
- }
-
- skb = ieee80211_beacon_get(hw, vif);
-
- if (!skb) {
- ret = -ENOMEM;
- goto out;
- }
-
- ath5k_debug_dump_skb(sc, skb, "BC ", 1);
-
- ath5k_txbuf_free_skb(sc, sc->bbuf);
- sc->bbuf->skb = skb;
- ret = ath5k_beacon_setup(sc, sc->bbuf);
- if (ret)
- sc->bbuf->skb = NULL;
-out:
- return ret;
-}
-
static void
set_beacon_filter(struct ieee80211_hw *hw, bool enable)
{
@@ -3466,20 +3268,19 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_bss_conf *bss_conf,
u32 changes)
{
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
unsigned long flags;
mutex_lock(&sc->lock);
- if (WARN_ON(sc->vif != vif))
- goto unlock;
if (changes & BSS_CHANGED_BSSID) {
/* Cache for later use during resets */
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = 0;
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
mmiowb();
}
@@ -3487,7 +3288,12 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
sc->bintval = bss_conf->beacon_int;
if (changes & BSS_CHANGED_ASSOC) {
- sc->assoc = bss_conf->assoc;
+ avf->assoc = bss_conf->assoc;
+ if (bss_conf->assoc)
+ sc->assoc = bss_conf->assoc;
+ else
+ sc->assoc = ath_any_vif_assoc(sc);
+
if (sc->opmode == NL80211_IFTYPE_STATION)
set_beacon_filter(hw, sc->assoc);
ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
@@ -3497,7 +3303,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
"Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, common->curbssid);
common->curaid = bss_conf->aid;
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
/* Once ANI is available you would start it here */
}
}
@@ -3515,7 +3321,6 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
BSS_CHANGED_BEACON_INT))
ath5k_beacon_config(sc);
- unlock:
mutex_unlock(&sc->lock);
}
@@ -3551,3 +3356,399 @@ static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
ath5k_hw_set_coverage_class(sc->ah, coverage_class);
mutex_unlock(&sc->lock);
}
+
+static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq_info qi;
+ int ret = 0;
+
+ if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
+ return 0;
+
+ mutex_lock(&sc->lock);
+
+ ath5k_hw_get_tx_queueprops(ah, queue, &qi);
+
+ qi.tqi_aifs = params->aifs;
+ qi.tqi_cw_min = params->cw_min;
+ qi.tqi_cw_max = params->cw_max;
+ qi.tqi_burst_time = params->txop;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
+ "Configure tx [queue %d], "
+ "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+ queue, params->aifs, params->cw_min,
+ params->cw_max, params->txop);
+
+ if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
+ ATH5K_ERR(sc,
+ "Unable to update hardware queue %u!\n", queue);
+ ret = -EIO;
+ } else
+ ath5k_hw_reset_tx_queue(ah, queue);
+
+ mutex_unlock(&sc->lock);
+
+ return ret;
+}
+
+static const struct ieee80211_ops ath5k_hw_ops = {
+ .tx = ath5k_tx,
+ .start = ath5k_start,
+ .stop = ath5k_stop,
+ .add_interface = ath5k_add_interface,
+ .remove_interface = ath5k_remove_interface,
+ .config = ath5k_config,
+ .prepare_multicast = ath5k_prepare_multicast,
+ .configure_filter = ath5k_configure_filter,
+ .set_key = ath5k_set_key,
+ .get_stats = ath5k_get_stats,
+ .get_survey = ath5k_get_survey,
+ .conf_tx = ath5k_conf_tx,
+ .get_tsf = ath5k_get_tsf,
+ .set_tsf = ath5k_set_tsf,
+ .reset_tsf = ath5k_reset_tsf,
+ .bss_info_changed = ath5k_bss_info_changed,
+ .sw_scan_start = ath5k_sw_scan_start,
+ .sw_scan_complete = ath5k_sw_scan_complete,
+ .set_coverage_class = ath5k_set_coverage_class,
+};
+
+/********************\
+* PCI Initialization *
+\********************/
+
+static int __devinit
+ath5k_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ void __iomem *mem;
+ struct ath5k_softc *sc;
+ struct ath_common *common;
+ struct ieee80211_hw *hw;
+ int ret;
+ u8 csz;
+
+ /*
+ * L0s needs to be disabled on all ath5k cards.
+ *
+ * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
+ * by default in the future in 2.6.36) this will also mean both L1 and
+ * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
+ * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
+ * though but cannot currently undue the effect of a blacklist, for
+ * details you can read pcie_aspm_sanity_check() and see how it adjusts
+ * the device link capability.
+ *
+ * It may be possible in the future to implement some PCI API to allow
+ * drivers to override blacklists for pre 1.1 PCIe but for now it is
+ * best to accept that both L0s and L1 will be disabled completely for
+ * distributions shipping with CONFIG_PCIEASPM rather than having this
+ * issue present. Motivation for adding this new API will be to help
+ * with power consumption for some of these devices.
+ */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable device\n");
+ goto err;
+ }
+
+ /* XXX 32-bit addressing only */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "32-bit DMA not available\n");
+ goto err_dis;
+ }
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+ if (csz == 0) {
+ /*
+ * Linux 2.4.18 (at least) writes the cache line size
+ * register as a 16-bit wide register which is wrong.
+ * We must have this setup properly for rx buffer
+ * DMA to work so force a reasonable value here if it
+ * comes up zero.
+ */
+ csz = L1_CACHE_BYTES >> 2;
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+ }
+ /*
+ * The default setting of latency timer yields poor results,
+ * set it to the value used by other systems. It may be worth
+ * tweaking this setting more.
+ */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+ /* Enable bus mastering */
+ pci_set_master(pdev);
+
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ ret = pci_request_region(pdev, 0, "ath5k");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+ goto err_dis;
+ }
+
+ mem = pci_iomap(pdev, 0, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
+ ret = -EIO;
+ goto err_reg;
+ }
+
+ /*
+ * Allocate hw (mac80211 main struct)
+ * and hw->priv (driver private data)
+ */
+ hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
+ /* Initialize driver private data */
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ hw->extra_tx_headroom = 2;
+ hw->channel_change_time = 5000;
+ sc = hw->priv;
+ sc->hw = hw;
+ sc->pdev = pdev;
+
+ /*
+ * Mark the device as detached to avoid processing
+ * interrupts until setup is complete.
+ */
+ __set_bit(ATH_STAT_INVALID, sc->status);
+
+ sc->iobase = mem; /* So we can unmap it on detach */
+ sc->opmode = NL80211_IFTYPE_STATION;
+ sc->bintval = 1000;
+ mutex_init(&sc->lock);
+ spin_lock_init(&sc->rxbuflock);
+ spin_lock_init(&sc->txbuflock);
+ spin_lock_init(&sc->block);
+
+ /* Set private data */
+ pci_set_drvdata(pdev, sc);
+
+ /* Setup interrupt handler */
+ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (ret) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err_free;
+ }
+
+ /* If we passed the test, malloc an ath5k_hw struct */
+ sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+ if (!sc->ah) {
+ ret = -ENOMEM;
+ ATH5K_ERR(sc, "out of memory\n");
+ goto err_irq;
+ }
+
+ sc->ah->ah_sc = sc;
+ sc->ah->ah_iobase = sc->iobase;
+ common = ath5k_hw_common(sc->ah);
+ common->ops = &ath5k_common_ops;
+ common->ah = sc->ah;
+ common->hw = hw;
+ common->cachelsz = csz << 2; /* convert to bytes */
+
+ /* Initialize device */
+ ret = ath5k_hw_attach(sc);
+ if (ret) {
+ goto err_free_ah;
+ }
+
+ /* set up multi-rate retry capabilities */
+ if (sc->ah->ah_version == AR5K_AR5212) {
+ hw->max_rates = 4;
+ hw->max_rate_tries = 11;
+ }
+
+ hw->vif_data_size = sizeof(struct ath5k_vif);
+
+ /* Finish private driver data initialization */
+ ret = ath5k_attach(pdev, hw);
+ if (ret)
+ goto err_ah;
+
+ ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
+ sc->ah->ah_mac_srev,
+ sc->ah->ah_phy_revision);
+
+ if (!sc->ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (sc->ah->ah_radio_5ghz_revision &&
+ !sc->ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!test_bit(AR5K_MODE_11A,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5Ghz only cards) -> report 5Ghz radio */
+ } else if (!test_bit(AR5K_MODE_11B,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ ATH5K_INFO(sc, "RF%s multiband radio found"
+ " (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (sc->ah->ah_radio_5ghz_revision &&
+ sc->ah->ah_radio_2ghz_revision){
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_2ghz_revision),
+ sc->ah->ah_radio_2ghz_revision);
+ }
+ }
+
+ ath5k_debug_init_device(sc);
+
+ /* ready to process interrupts */
+ __clear_bit(ATH_STAT_INVALID, sc->status);
+
+ return 0;
+err_ah:
+ ath5k_hw_detach(sc->ah);
+err_free_ah:
+ kfree(sc->ah);
+err_irq:
+ free_irq(pdev->irq, sc);
+err_free:
+ ieee80211_free_hw(hw);
+err_map:
+ pci_iounmap(pdev, mem);
+err_reg:
+ pci_release_region(pdev, 0);
+err_dis:
+ pci_disable_device(pdev);
+err:
+ return ret;
+}
+
+static void __devexit
+ath5k_pci_remove(struct pci_dev *pdev)
+{
+ struct ath5k_softc *sc = pci_get_drvdata(pdev);
+
+ ath5k_debug_finish_device(sc);
+ ath5k_detach(pdev, sc->hw);
+ ath5k_hw_detach(sc->ah);
+ kfree(sc->ah);
+ free_irq(pdev->irq, sc);
+ pci_iounmap(pdev, sc->iobase);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ ieee80211_free_hw(sc->hw);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ath5k_pci_suspend(struct device *dev)
+{
+ struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
+
+ ath5k_led_off(sc);
+ return 0;
+}
+
+static int ath5k_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct ath5k_softc *sc = pci_get_drvdata(pdev);
+
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ ath5k_led_enable(sc);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
+#define ATH5K_PM_OPS (&ath5k_pm_ops)
+#else
+#define ATH5K_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct pci_driver ath5k_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ath5k_pci_id_table,
+ .probe = ath5k_pci_probe,
+ .remove = __devexit_p(ath5k_pci_remove),
+ .driver.pm = ATH5K_PM_OPS,
+};
+
+/*
+ * Module init/exit functions
+ */
+static int __init
+init_ath5k_pci(void)
+{
+ int ret;
+
+ ret = pci_register_driver(&ath5k_pci_driver);
+ if (ret) {
+ printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __exit
+exit_ath5k_pci(void)
+{
+ pci_unregister_driver(&ath5k_pci_driver);
+}
+
+module_init(init_ath5k_pci);
+module_exit(exit_ath5k_pci);