summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
-rw-r--r--drivers/net/wireless/ath/ath5k/Kconfig41
-rw-r--r--drivers/net/wireless/ath/ath5k/Makefile15
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h1354
-rw-r--r--drivers/net/wireless/ath/ath5k/attach.c348
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c3110
-rw-r--r--drivers/net/wireless/ath/ath5k/base.h190
-rw-r--r--drivers/net/wireless/ath/ath5k/caps.c195
-rw-r--r--drivers/net/wireless/ath/ath5k/debug.c538
-rw-r--r--drivers/net/wireless/ath/ath5k/debug.h203
-rw-r--r--drivers/net/wireless/ath/ath5k/desc.c696
-rw-r--r--drivers/net/wireless/ath/ath5k/desc.h332
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c705
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c1769
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.h441
-rw-r--r--drivers/net/wireless/ath/ath5k/gpio.c176
-rw-r--r--drivers/net/wireless/ath/ath5k/initvals.c1557
-rw-r--r--drivers/net/wireless/ath/ath5k/led.c176
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c1174
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c2599
-rw-r--r--drivers/net/wireless/ath/ath5k/qcu.c546
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h2589
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c1346
-rw-r--r--drivers/net/wireless/ath/ath5k/rfbuffer.h1181
-rw-r--r--drivers/net/wireless/ath/ath5k/rfgain.h516
24 files changed, 21797 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
new file mode 100644
index 000000000000..509b6f94f73b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -0,0 +1,41 @@
+config ATH5K
+ tristate "Atheros 5xxx wireless cards support"
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ select ATH_COMMON
+ select MAC80211_LEDS
+ select LEDS_CLASS
+ select NEW_LEDS
+ ---help---
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
+
+ Currently the following chip versions are supported:
+
+ MAC: AR5211 AR5212
+ PHY: RF5111/2111 RF5112/2112 RF5413/2413
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ If you choose to build a module, it'll be called ath5k. Say M if
+ unsure.
+
+config ATH5K_DEBUG
+ bool "Atheros 5xxx debugging"
+ depends on ATH5K
+ ---help---
+ Atheros 5xxx debugging messages.
+
+ Say Y, if and you will get debug options for ath5k.
+ To use this, you need to mount debugfs:
+
+ mkdir /debug/
+ mount -t debugfs debug /debug/
+
+ You will get access to files under:
+ /debug/ath5k/phy0/
+
+ To enable debug, pass the debug level to the debug module
+ parameter. For example:
+
+ modprobe ath5k debug=0x00000400
+
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
new file mode 100644
index 000000000000..84a74c5248e5
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -0,0 +1,15 @@
+ath5k-y += caps.o
+ath5k-y += initvals.o
+ath5k-y += eeprom.o
+ath5k-y += gpio.o
+ath5k-y += desc.o
+ath5k-y += dma.o
+ath5k-y += qcu.o
+ath5k-y += pcu.o
+ath5k-y += phy.o
+ath5k-y += reset.o
+ath5k-y += attach.o
+ath5k-y += base.o
+ath5k-y += led.o
+ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
+obj-$(CONFIG_ATH5K) += ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
new file mode 100644
index 000000000000..60c6d2edc4b9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -0,0 +1,1354 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ATH5K_H
+#define _ATH5K_H
+
+/* TODO: Clean up channel debuging -doesn't work anyway- and start
+ * working on reg. control code using all available eeprom information
+ * -rev. engineering needed- */
+#define CHAN_DEBUG 0
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+#include "../regd.h"
+
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
+
+/* PCI IDs */
+#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
+#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
+#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
+#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
+#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
+#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
+#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
+#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
+#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
+#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
+
+/****************************\
+ GENERIC DRIVER DEFINITIONS
+\****************************/
+
+#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+ printk(_level "ath5k %s: " _fmt, \
+ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
+ ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
+ if (net_ratelimit()) \
+ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+ } while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...) \
+ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags) \
+ (((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags) \
+ (((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+ (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \
+ (_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \
+ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access to PHY registers */
+#define AR5K_PHY_READ(ah, _reg) \
+ ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_WRITE(ah, _reg, _val) \
+ ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue) \
+ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \
+ ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \
+ _reg |= 1 << _queue; \
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \
+ _reg &= ~(1 << _queue); \
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do { \
+ if (_i % 64) \
+ udelay(1); \
+} while (0)
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ 0
+#define AR5K_INI_RFGAIN_2GHZ 1
+
+/* TODO: Clean this up */
+#define AR5K_INI_VAL_11A 0
+#define AR5K_INI_VAL_11A_TURBO 1
+#define AR5K_INI_VAL_11B 2
+#define AR5K_INI_VAL_11G 3
+#define AR5K_INI_VAL_11G_TURBO 4
+#define AR5K_INI_VAL_XR 0
+#define AR5K_INI_VAL_MAX 5
+
+/* Used for BSSID etc manipulation */
+#define AR5K_LOW_ID(_a)( \
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \
+)
+
+#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8)
+
+/*
+ * Some tuneable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
+ */
+#define AR5K_TUNE_DMA_BEACON_RESP 2
+#define AR5K_TUNE_SW_BEACON_RESP 10
+#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
+#define AR5K_TUNE_RADAR_ALERT false
+#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
+#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
+#define AR5K_TUNE_REGISTER_TIMEOUT 20000
+/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
+ * be the max value. */
+#define AR5K_TUNE_RSSI_THRES 129
+/* This must be set when setting the RSSI threshold otherwise it can
+ * prevent a reset. If AR5K_RSSI_THR is read after writing to it
+ * the BMISS_THRES will be seen as 0, seems harware doesn't keep
+ * track of it. Max value depends on harware. For AR5210 this is just 7.
+ * For AR5211+ this seems to be up to 255. */
+#define AR5K_TUNE_BMISS_THRES 7
+#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
+#define AR5K_TUNE_BEACON_INTERVAL 100
+#define AR5K_TUNE_AIFS 2
+#define AR5K_TUNE_AIFS_11B 2
+#define AR5K_TUNE_AIFS_XR 0
+#define AR5K_TUNE_CWMIN 15
+#define AR5K_TUNE_CWMIN_11B 31
+#define AR5K_TUNE_CWMIN_XR 3
+#define AR5K_TUNE_CWMAX 1023
+#define AR5K_TUNE_CWMAX_11B 1023
+#define AR5K_TUNE_CWMAX_XR 7
+#define AR5K_TUNE_NOISE_FLOOR -72
+#define AR5K_TUNE_MAX_TXPOWER 63
+#define AR5K_TUNE_DEFAULT_TXPOWER 25
+#define AR5K_TUNE_TPC_TXPOWER false
+#define AR5K_TUNE_ANT_DIVERSITY true
+#define AR5K_TUNE_HWTXTRIES 4
+
+#define AR5K_INIT_CARR_SENSE_EN 1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG ( \
+ AR5K_CFG_SWTD | AR5K_CFG_SWRD \
+)
+#else
+#define AR5K_INIT_CFG 0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_CYCRSSI_THR1 2
+#define AR5K_INIT_TX_LATENCY 502
+#define AR5K_INIT_USEC 39
+#define AR5K_INIT_USEC_TURBO 79
+#define AR5K_INIT_USEC_32 31
+#define AR5K_INIT_SLOT_TIME 396
+#define AR5K_INIT_SLOT_TIME_TURBO 480
+#define AR5K_INIT_ACK_CTS_TIMEOUT 1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
+#define AR5K_INIT_PROG_IFS 920
+#define AR5K_INIT_PROG_IFS_TURBO 960
+#define AR5K_INIT_EIFS 3440
+#define AR5K_INIT_EIFS_TURBO 6880
+#define AR5K_INIT_SIFS 560
+#define AR5K_INIT_SIFS_TURBO 480
+#define AR5K_INIT_SH_RETRY 10
+#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY 32
+#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY 10
+
+#define AR5K_INIT_TRANSMIT_LATENCY ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC) \
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \
+ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \
+ (AR5K_INIT_USEC_TURBO) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \
+ (AR5K_INIT_PROG_IFS) \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \
+ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+ (AR5K_INIT_PROG_IFS_TURBO) \
+)
+
+/* token to use for aifs, cwmin, cwmax in MadWiFi */
+#define AR5K_TXQ_USEDEFAULT ((u32) -1)
+
+/* GENERIC CHIPSET DEFINITIONS */
+
+/* MAC Chips */
+enum ath5k_version {
+ AR5K_AR5210 = 0,
+ AR5K_AR5211 = 1,
+ AR5K_AR5212 = 2,
+};
+
+/* PHY Chips */
+enum ath5k_radio {
+ AR5K_RF5110 = 0,
+ AR5K_RF5111 = 1,
+ AR5K_RF5112 = 2,
+ AR5K_RF2413 = 3,
+ AR5K_RF5413 = 4,
+ AR5K_RF2316 = 5,
+ AR5K_RF2317 = 6,
+ AR5K_RF2425 = 7,
+};
+
+/*
+ * Common silicon revision/version values
+ */
+
+enum ath5k_srev_type {
+ AR5K_VERSION_MAC,
+ AR5K_VERSION_RAD,
+};
+
+struct ath5k_srev_name {
+ const char *sr_name;
+ enum ath5k_srev_type sr_type;
+ u_int sr_val;
+};
+
+#define AR5K_SREV_UNKNOWN 0xffff
+
+#define AR5K_SREV_AR5210 0x00 /* Crete */
+#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B 0x30 /* Spirit */
+#define AR5K_SREV_AR5211 0x40 /* Oahu */
+#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5213 0x55 /* ??? */
+#define AR5K_SREV_AR5213A 0x59 /* Hainan */
+#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414 0x70 /* Griffin */
+#define AR5K_SREV_AR5424 0x90 /* Condor */
+#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414 0xa0 /* Eagle */
+#define AR5K_SREV_AR2415 0xb0 /* Talon */
+#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418 0xca /* PCI-E */
+#define AR5K_SREV_AR2425 0xe0 /* Swan */
+#define AR5K_SREV_AR2417 0xf0 /* Nala */
+
+#define AR5K_SREV_RAD_5110 0x00
+#define AR5K_SREV_RAD_5111 0x10
+#define AR5K_SREV_RAD_5111A 0x15
+#define AR5K_SREV_RAD_2111 0x20
+#define AR5K_SREV_RAD_5112 0x30
+#define AR5K_SREV_RAD_5112A 0x35
+#define AR5K_SREV_RAD_5112B 0x36
+#define AR5K_SREV_RAD_2112 0x40
+#define AR5K_SREV_RAD_2112A 0x45
+#define AR5K_SREV_RAD_2112B 0x46
+#define AR5K_SREV_RAD_2413 0x50
+#define AR5K_SREV_RAD_5413 0x60
+#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */
+#define AR5K_SREV_RAD_2317 0x80
+#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425 0xa2
+#define AR5K_SREV_RAD_5133 0xc0
+
+#define AR5K_SREV_PHY_5211 0x30
+#define AR5K_SREV_PHY_5212 0x41
+#define AR5K_SREV_PHY_5212A 0x42
+#define AR5K_SREV_PHY_5212B 0x43
+#define AR5K_SREV_PHY_2413 0x45
+#define AR5K_SREV_PHY_5413 0x61
+#define AR5K_SREV_PHY_2425 0x70
+
+/* IEEE defs */
+#define IEEE80211_MAX_LEN 2500
+
+/* TODO add support to mac80211 for vendor-specific rates and modes */
+
+/*
+ * Some of this information is based on Documentation from:
+ *
+ * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ *
+ * Modulation for Atheros' eXtended Range - range enhancing extension that is
+ * supposed to double the distance an Atheros client device can keep a
+ * connection with an Atheros access point. This is achieved by increasing
+ * the receiver sensitivity up to, -105dBm, which is about 20dB above what
+ * the 802.11 specifications demand. In addition, new (proprietary) data rates
+ * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ *
+ * Please note that can you either use XR or TURBO but you cannot use both,
+ * they are exclusive.
+ *
+ */
+#define MODULATION_XR 0x00000200
+/*
+ * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
+ * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
+ * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
+ * channels. To use this feature your Access Point must also suport it.
+ * There is also a distinction between "static" and "dynamic" turbo modes:
+ *
+ * - Static: is the dumb version: devices set to this mode stick to it until
+ * the mode is turned off.
+ * - Dynamic: is the intelligent version, the network decides itself if it
+ * is ok to use turbo. As soon as traffic is detected on adjacent channels
+ * (which would get used in turbo mode), or when a non-turbo station joins
+ * the network, turbo mode won't be used until the situation changes again.
+ * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
+ * monitors the used radio band in order to decide whether turbo mode may
+ * be used or not.
+ *
+ * This article claims Super G sticks to bonding of channels 5 and 6 for
+ * USA:
+ *
+ * http://www.pcworld.com/article/id,113428-page,1/article.html
+ *
+ * The channel bonding seems to be driver specific though. In addition to
+ * deciding what channels will be used, these "Turbo" modes are accomplished
+ * by also enabling the following features:
+ *
+ * - Bursting: allows multiple frames to be sent at once, rather than pausing
+ * after each frame. Bursting is a standards-compliant feature that can be
+ * used with any Access Point.
+ * - Fast frames: increases the amount of information that can be sent per
+ * frame, also resulting in a reduction of transmission overhead. It is a
+ * proprietary feature that needs to be supported by the Access Point.
+ * - Compression: data frames are compressed in real time using a Lempel Ziv
+ * algorithm. This is done transparently. Once this feature is enabled,
+ * compression and decompression takes place inside the chipset, without
+ * putting additional load on the host CPU.
+ *
+ */
+#define MODULATION_TURBO 0x00000080
+
+enum ath5k_driver_mode {
+ AR5K_MODE_11A = 0,
+ AR5K_MODE_11A_TURBO = 1,
+ AR5K_MODE_11B = 2,
+ AR5K_MODE_11G = 3,
+ AR5K_MODE_11G_TURBO = 4,
+ AR5K_MODE_XR = 0,
+ AR5K_MODE_MAX = 5
+};
+
+
+/****************\
+ TX DEFINITIONS
+\****************/
+
+/*
+ * TX Status descriptor
+ */
+struct ath5k_tx_status {
+ u16 ts_seqnum;
+ u16 ts_tstamp;
+ u8 ts_status;
+ u8 ts_rate[4];
+ u8 ts_retry[4];
+ u8 ts_final_idx;
+ s8 ts_rssi;
+ u8 ts_shortretry;
+ u8 ts_longretry;
+ u8 ts_virtcol;
+ u8 ts_antenna;
+};
+
+#define AR5K_TXSTAT_ALTRATE 0x80
+#define AR5K_TXERR_XRETRY 0x01
+#define AR5K_TXERR_FILT 0x02
+#define AR5K_TXERR_FIFO 0x04
+
+/**
+ * enum ath5k_tx_queue - Queue types used to classify tx queues.
+ * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
+ * @AR5K_TX_QUEUE_DATA: A normal data queue
+ * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
+ * @AR5K_TX_QUEUE_BEACON: The beacon queue
+ * @AR5K_TX_QUEUE_CAB: The after-beacon queue
+ * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
+ */
+enum ath5k_tx_queue {
+ AR5K_TX_QUEUE_INACTIVE = 0,
+ AR5K_TX_QUEUE_DATA,
+ AR5K_TX_QUEUE_XR_DATA,
+ AR5K_TX_QUEUE_BEACON,
+ AR5K_TX_QUEUE_CAB,
+ AR5K_TX_QUEUE_UAPSD,
+};
+
+#define AR5K_NUM_TX_QUEUES 10
+#define AR5K_NUM_TX_QUEUES_NOQCU 2
+
+/*
+ * Queue syb-types to classify normal data queues.
+ * These are the 4 Access Categories as defined in
+ * WME spec. 0 is the lowest priority and 4 is the
+ * highest. Normal data that hasn't been classified
+ * goes to the Best Effort AC.
+ */
+enum ath5k_tx_queue_subtype {
+ AR5K_WME_AC_BK = 0, /*Background traffic*/
+ AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
+ AR5K_WME_AC_VI, /*Video traffic*/
+ AR5K_WME_AC_VO, /*Voice traffic*/
+};
+
+/*
+ * Queue ID numbers as returned by the hw functions, each number
+ * represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue. These match
+ * d80211 definitions (net80211/MadWiFi don't use them).
+ */
+enum ath5k_tx_queue_id {
+ AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
+ AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
+ AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
+ AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/
+ AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
+ AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
+ AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
+ AR5K_TX_QUEUE_ID_UAPSD = 8,
+ AR5K_TX_QUEUE_ID_XR_DATA = 9,
+};
+
+/*
+ * Flags to set hw queue's parameters...
+ */
+#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
+#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
+#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
+#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */
+#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */
+#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */
+#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */
+#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */
+#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/
+#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */
+#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */
+#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/
+
+/*
+ * A struct to hold tx queue's parameters
+ */
+struct ath5k_txq_info {
+ enum ath5k_tx_queue tqi_type;
+ enum ath5k_tx_queue_subtype tqi_subtype;
+ u16 tqi_flags; /* Tx queue flags (see above) */
+ u32 tqi_aifs; /* Arbitrated Interframe Space */
+ s32 tqi_cw_min; /* Minimum Contention Window */
+ s32 tqi_cw_max; /* Maximum Contention Window */
+ u32 tqi_cbr_period; /* Constant bit rate period */
+ u32 tqi_cbr_overflow_limit;
+ u32 tqi_burst_time;
+ u32 tqi_ready_time; /* Not used */
+};
+
+/*
+ * Transmit packet types.
+ * used on tx control descriptor
+ * TODO: Use them inside base.c corectly
+ */
+enum ath5k_pkt_type {
+ AR5K_PKT_TYPE_NORMAL = 0,
+ AR5K_PKT_TYPE_ATIM = 1,
+ AR5K_PKT_TYPE_PSPOLL = 2,
+ AR5K_PKT_TYPE_BEACON = 3,
+ AR5K_PKT_TYPE_PROBE_RESP = 4,
+ AR5K_PKT_TYPE_PIFS = 5,
+};
+
+/*
+ * TX power and TPC settings
+ */
+#define AR5K_TXPOWER_OFDM(_r, _v) ( \
+ ((0 & 1) << ((_v) + 6)) | \
+ (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \
+)
+
+#define AR5K_TXPOWER_CCK(_r, _v) ( \
+ (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \
+)
+
+/*
+ * DMA size definitions (2^n+2)
+ */
+enum ath5k_dmasize {
+ AR5K_DMASIZE_4B = 0,
+ AR5K_DMASIZE_8B,
+ AR5K_DMASIZE_16B,
+ AR5K_DMASIZE_32B,
+ AR5K_DMASIZE_64B,
+ AR5K_DMASIZE_128B,
+ AR5K_DMASIZE_256B,
+ AR5K_DMASIZE_512B
+};
+
+
+/****************\
+ RX DEFINITIONS
+\****************/
+
+/*
+ * RX Status descriptor
+ */
+struct ath5k_rx_status {
+ u16 rs_datalen;
+ u16 rs_tstamp;
+ u8 rs_status;
+ u8 rs_phyerr;
+ s8 rs_rssi;
+ u8 rs_keyix;
+ u8 rs_rate;
+ u8 rs_antenna;
+ u8 rs_more;
+};
+
+#define AR5K_RXERR_CRC 0x01
+#define AR5K_RXERR_PHY 0x02
+#define AR5K_RXERR_FIFO 0x04
+#define AR5K_RXERR_DECRYPT 0x08
+#define AR5K_RXERR_MIC 0x10
+#define AR5K_RXKEYIX_INVALID ((u8) - 1)
+#define AR5K_TXKEYIX_INVALID ((u32) - 1)
+
+
+/**************************\
+ BEACON TIMERS DEFINITIONS
+\**************************/
+
+#define AR5K_BEACON_PERIOD 0x0000ffff
+#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
+#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
+
+#if 0
+/**
+ * struct ath5k_beacon_state - Per-station beacon timer state.
+ * @bs_interval: in TU's, can also include the above flags
+ * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
+ * Point Coordination Function capable AP
+ */
+struct ath5k_beacon_state {
+ u32 bs_next_beacon;
+ u32 bs_next_dtim;
+ u32 bs_interval;
+ u8 bs_dtim_period;
+ u8 bs_cfp_period;
+ u16 bs_cfp_max_duration;
+ u16 bs_cfp_du_remain;
+ u16 bs_tim_offset;
+ u16 bs_sleep_duration;
+ u16 bs_bmiss_threshold;
+ u32 bs_cfp_next;
+};
+#endif
+
+
+/*
+ * TSF to TU conversion:
+ *
+ * TSF is a 64bit value in usec (microseconds).
+ * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
+ * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
+ */
+#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
+
+/*******************************\
+ GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+enum ath5k_rfgain {
+ AR5K_RFGAIN_INACTIVE = 0,
+ AR5K_RFGAIN_ACTIVE,
+ AR5K_RFGAIN_READ_REQUESTED,
+ AR5K_RFGAIN_NEED_CHANGE,
+};
+
+struct ath5k_gain {
+ u8 g_step_idx;
+ u8 g_current;
+ u8 g_target;
+ u8 g_low;
+ u8 g_high;
+ u8 g_f_corr;
+ u8 g_state;
+};
+
+/********************\
+ COMMON DEFINITIONS
+\********************/
+
+#define AR5K_SLOT_TIME_9 396
+#define AR5K_SLOT_TIME_20 880
+#define AR5K_SLOT_TIME_MAX 0xffff
+
+/* channel_flags */
+#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */
+#define CHANNEL_TURBO 0x0010 /* Turbo Channel */
+#define CHANNEL_CCK 0x0020 /* CCK channel */
+#define CHANNEL_OFDM 0x0040 /* OFDM channel */
+#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */
+#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
+#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
+#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
+#define CHANNEL_XR 0x0800 /* XR channel */
+
+#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
+#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
+#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
+#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_108A CHANNEL_T
+#define CHANNEL_108G CHANNEL_TG
+#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
+
+#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
+ CHANNEL_TURBO)
+
+#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO)
+#define CHANNEL_MODES CHANNEL_ALL
+
+/*
+ * Used internaly for reset_tx_queue).
+ * Also see struct struct ieee80211_channel.
+ */
+#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
+#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
+
+/*
+ * The following structure is used to map 2GHz channels to
+ * 5GHz Atheros channels.
+ * TODO: Clean up
+ */
+struct ath5k_athchan_2ghz {
+ u32 a2_flags;
+ u16 a2_athchan;
+};
+
+
+/******************\
+ RATE DEFINITIONS
+\******************/
+
+/**
+ * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
+ *
+ * The rate code is used to get the RX rate or set the TX rate on the
+ * hardware descriptors. It is also used for internal modulation control
+ * and settings.
+ *
+ * This is the hardware rate map we are aware of:
+ *
+ * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
+ * rate_kbps 3000 1000 ? ? ? 2000 500 48000
+ *
+ * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
+ * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
+ *
+ * rate_code 17 18 19 20 21 22 23 24
+ * rate_kbps ? ? ? ? ? ? ? 11000
+ *
+ * rate_code 25 26 27 28 29 30 31 32
+ * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
+ *
+ * "S" indicates CCK rates with short preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
+ */
+#define AR5K_MAX_RATES 32
+
+/* B */
+#define ATH5K_RATE_CODE_1M 0x1B
+#define ATH5K_RATE_CODE_2M 0x1A
+#define ATH5K_RATE_CODE_5_5M 0x19
+#define ATH5K_RATE_CODE_11M 0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M 0x0B
+#define ATH5K_RATE_CODE_9M 0x0F
+#define ATH5K_RATE_CODE_12M 0x0A
+#define ATH5K_RATE_CODE_18M 0x0E
+#define ATH5K_RATE_CODE_24M 0x09
+#define ATH5K_RATE_CODE_36M 0x0D
+#define ATH5K_RATE_CODE_48M 0x08
+#define ATH5K_RATE_CODE_54M 0x0C
+/* XR */
+#define ATH5K_RATE_CODE_XR_500K 0x07
+#define ATH5K_RATE_CODE_XR_1M 0x02
+#define ATH5K_RATE_CODE_XR_2M 0x06
+#define ATH5K_RATE_CODE_XR_3M 0x01
+
+/* adding this flag to rate_code enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
+
+/*
+ * Crypto definitions
+ */
+
+#define AR5K_KEYCACHE_SIZE 8
+
+/***********************\
+ HW RELATED DEFINITIONS
+\***********************/
+
+/*
+ * Misc definitions
+ */
+#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
+
+#define AR5K_ASSERT_ENTRY(_e, _s) do { \
+ if (_e >= _s) \
+ return (false); \
+} while (0)
+
+/*
+ * Hardware interrupt abstraction
+ */
+
+/**
+ * enum ath5k_int - Hardware interrupt masks helpers
+ *
+ * @AR5K_INT_RX: mask to identify received frame interrupts, of type
+ * AR5K_ISR_RXOK or AR5K_ISR_RXERR
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
+ * @AR5K_INT_RXNOFRM: No frame received (?)
+ * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
+ * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
+ * LinkPtr is NULL. For more details, refer to:
+ * http://www.freepatentsonline.com/20030225739.html
+ * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
+ * Note that Rx overrun is not always fatal, on some chips we can continue
+ * operation without reseting the card, that's why int_fatal is not
+ * common for all chips.
+ * @AR5K_INT_TX: mask to identify received frame interrupts, of type
+ * AR5K_ISR_TXOK or AR5K_ISR_TXERR
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
+ * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
+ * We currently do increments on interrupt by
+ * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
+ * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
+ * checked. We should do this with ath5k_hw_update_mib_counters() but
+ * it seems we should also then do some noise immunity work.
+ * @AR5K_INT_RXPHY: RX PHY Error
+ * @AR5K_INT_RXKCM: RX Key cache miss
+ * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
+ * beacon that must be handled in software. The alternative is if you
+ * have VEOL support, in that case you let the hardware deal with things.
+ * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
+ * beacons from the AP have associated with, we should probably try to
+ * reassociate. When in IBSS mode this might mean we have not received
+ * any beacons from any local stations. Note that every station in an
+ * IBSS schedules to send beacons at the Target Beacon Transmission Time
+ * (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
+ * until properly handled
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
+ * errors. These types of errors we can enable seem to be of type
+ * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
+ * @AR5K_INT_GLOBAL: Used to clear and set the IER
+ * @AR5K_INT_NOCARD: signals the card has been removed
+ * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
+ * bit value
+ *
+ * These are mapped to take advantage of some common bits
+ * between the MACs, to be able to set intr properties
+ * easier. Some of them are not used yet inside hw.c. Most map
+ * to the respective hw interrupt value as they are common amogst different
+ * MACs.
+ */
+enum ath5k_int {
+ AR5K_INT_RXOK = 0x00000001,
+ AR5K_INT_RXDESC = 0x00000002,
+ AR5K_INT_RXERR = 0x00000004,
+ AR5K_INT_RXNOFRM = 0x00000008,
+ AR5K_INT_RXEOL = 0x00000010,
+ AR5K_INT_RXORN = 0x00000020,
+ AR5K_INT_TXOK = 0x00000040,
+ AR5K_INT_TXDESC = 0x00000080,
+ AR5K_INT_TXERR = 0x00000100,
+ AR5K_INT_TXNOFRM = 0x00000200,
+ AR5K_INT_TXEOL = 0x00000400,
+ AR5K_INT_TXURN = 0x00000800,
+ AR5K_INT_MIB = 0x00001000,
+ AR5K_INT_SWI = 0x00002000,
+ AR5K_INT_RXPHY = 0x00004000,
+ AR5K_INT_RXKCM = 0x00008000,
+ AR5K_INT_SWBA = 0x00010000,
+ AR5K_INT_BRSSI = 0x00020000,
+ AR5K_INT_BMISS = 0x00040000,
+ AR5K_INT_FATAL = 0x00080000, /* Non common */
+ AR5K_INT_BNR = 0x00100000, /* Non common */
+ AR5K_INT_TIM = 0x00200000, /* Non common */
+ AR5K_INT_DTIM = 0x00400000, /* Non common */
+ AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */
+ AR5K_INT_GPIO = 0x01000000,
+ AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */
+ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */
+ AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */
+ AR5K_INT_QCBRORN = 0x10000000, /* Non common */
+ AR5K_INT_QCBRURN = 0x20000000, /* Non common */
+ AR5K_INT_QTRIG = 0x40000000, /* Non common */
+ AR5K_INT_GLOBAL = 0x80000000,
+
+ AR5K_INT_COMMON = AR5K_INT_RXOK
+ | AR5K_INT_RXDESC
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXNOFRM
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXNOFRM
+ | AR5K_INT_TXEOL
+ | AR5K_INT_TXURN
+ | AR5K_INT_MIB
+ | AR5K_INT_SWI
+ | AR5K_INT_RXPHY
+ | AR5K_INT_RXKCM
+ | AR5K_INT_SWBA
+ | AR5K_INT_BRSSI
+ | AR5K_INT_BMISS
+ | AR5K_INT_GPIO
+ | AR5K_INT_GLOBAL,
+
+ AR5K_INT_NOCARD = 0xffffffff
+};
+
+/*
+ * Power management
+ */
+enum ath5k_power_mode {
+ AR5K_PM_UNDEFINED = 0,
+ AR5K_PM_AUTO,
+ AR5K_PM_AWAKE,
+ AR5K_PM_FULL_SLEEP,
+ AR5K_PM_NETWORK_SLEEP,
+};
+
+/*
+ * These match net80211 definitions (not used in
+ * mac80211).
+ * TODO: Clean this up
+ */
+#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
+#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
+#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
+#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
+#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
+
+/* GPIO-controlled software LED */
+#define AR5K_SOFTLED_PIN 0
+#define AR5K_SOFTLED_ON 0
+#define AR5K_SOFTLED_OFF 1
+
+/*
+ * Chipset capabilities -see ath5k_hw_get_capability-
+ * get_capability function is not yet fully implemented
+ * in ath5k so most of these don't work yet...
+ * TODO: Implement these & merge with _TUNE_ stuff above
+ */
+enum ath5k_capability_type {
+ AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
+ AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */
+ AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */
+ AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */
+ AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */
+ AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */
+ AR5K_CAP_VEOL = 7, /* Supports virtual EOL */
+ AR5K_CAP_COMPRESSION = 8, /* Supports compression */
+ AR5K_CAP_BURST = 9, /* Supports packet bursting */
+ AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */
+ AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */
+ AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */
+ AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */
+ AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */
+ AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */
+ AR5K_CAP_XR = 16, /* Supports XR mode */
+ AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */
+ AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */
+ AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */
+ AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */
+};
+
+
+/* XXX: we *may* move cap_range stuff to struct wiphy */
+struct ath5k_capabilities {
+ /*
+ * Supported PHY modes
+ * (ie. CHANNEL_A, CHANNEL_B, ...)
+ */
+ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
+
+ /*
+ * Frequency range (without regulation restrictions)
+ */
+ struct {
+ u16 range_2ghz_min;
+ u16 range_2ghz_max;
+ u16 range_5ghz_min;
+ u16 range_5ghz_max;
+ } cap_range;
+
+ /*
+ * Values stored in the EEPROM (some of them...)
+ */
+ struct ath5k_eeprom_info cap_eeprom;
+
+ /*
+ * Queue information
+ */
+ struct {
+ u8 q_tx_num;
+ } cap_queues;
+};
+
+
+/***************************************\
+ HARDWARE ABSTRACTION LAYER STRUCTURE
+\***************************************/
+
+/*
+ * Misc defines
+ */
+
+#define AR5K_MAX_GPIO 10
+#define AR5K_MAX_RF_BANKS 8
+
+/* TODO: Clean up and merge with ath5k_softc */
+struct ath5k_hw {
+ u32 ah_magic;
+
+ struct ath5k_softc *ah_sc;
+ void __iomem *ah_iobase;
+
+ enum ath5k_int ah_imr;
+
+ enum nl80211_iftype ah_op_mode;
+ enum ath5k_power_mode ah_power_mode;
+ struct ieee80211_channel ah_current_channel;
+ bool ah_turbo;
+ bool ah_calibration;
+ bool ah_running;
+ bool ah_single_chip;
+ bool ah_combined_mic;
+
+ u32 ah_mac_srev;
+ u16 ah_mac_version;
+ u16 ah_mac_revision;
+ u16 ah_phy_revision;
+ u16 ah_radio_5ghz_revision;
+ u16 ah_radio_2ghz_revision;
+
+ enum ath5k_version ah_version;
+ enum ath5k_radio ah_radio;
+ u32 ah_phy;
+
+ bool ah_5ghz;
+ bool ah_2ghz;
+
+#define ah_modes ah_capabilities.cap_mode
+#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
+
+ u32 ah_atim_window;
+ u32 ah_aifs;
+ u32 ah_cw_min;
+ u32 ah_cw_max;
+ bool ah_software_retry;
+ u32 ah_limit_tx_retries;
+
+ u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+ bool ah_ant_diversity;
+
+ u8 ah_sta_id[ETH_ALEN];
+
+ /* Current BSSID we are trying to assoc to / create.
+ * This is passed by mac80211 on config_interface() and cached here for
+ * use in resets */
+ u8 ah_bssid[ETH_ALEN];
+ u8 ah_bssid_mask[ETH_ALEN];
+
+ u32 ah_gpio[AR5K_MAX_GPIO];
+ int ah_gpio_npins;
+
+ struct ath_regulatory ah_regulatory;
+ struct ath5k_capabilities ah_capabilities;
+
+ struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
+ u32 ah_txq_status;
+ u32 ah_txq_imr_txok;
+ u32 ah_txq_imr_txerr;
+ u32 ah_txq_imr_txurn;
+ u32 ah_txq_imr_txdesc;
+ u32 ah_txq_imr_txeol;
+ u32 ah_txq_imr_cbrorn;
+ u32 ah_txq_imr_cbrurn;
+ u32 ah_txq_imr_qtrig;
+ u32 ah_txq_imr_nofrm;
+ u32 ah_txq_isr;
+ u32 *ah_rf_banks;
+ size_t ah_rf_banks_size;
+ size_t ah_rf_regs_count;
+ struct ath5k_gain ah_gain;
+ u8 ah_offset[AR5K_MAX_RF_BANKS];
+
+
+ struct {
+ /* Temporary tables used for interpolation */
+ u8 tmpL[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 tmpR[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_POWER_TABLE_SIZE];
+ u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
+ u16 txp_rates_power_table[AR5K_MAX_RATES];
+ u8 txp_min_idx;
+ bool txp_tpc;
+ /* Values in 0.25dB units */
+ s16 txp_min_pwr;
+ s16 txp_max_pwr;
+ s16 txp_offset;
+ s16 txp_ofdm;
+ /* Values in dB units */
+ s16 txp_cck_ofdm_pwr_delta;
+ s16 txp_cck_ofdm_gainf_delta;
+ } ah_txpower;
+
+ struct {
+ bool r_enabled;
+ int r_last_alert;
+ struct ieee80211_channel r_last_channel;
+ } ah_radar;
+
+ /* noise floor from last periodic calibration */
+ s32 ah_noise_floor;
+
+ /*
+ * Function pointers
+ */
+ int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags);
+ int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
+ unsigned int, unsigned int, unsigned int, unsigned int,
+ unsigned int, unsigned int, unsigned int);
+ int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ unsigned int, unsigned int, unsigned int, unsigned int,
+ unsigned int, unsigned int);
+ int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_tx_status *);
+ int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ struct ath5k_rx_status *);
+};
+
+/*
+ * Prototypes
+ */
+
+/* Attach/Detach Functions */
+extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
+extern void ath5k_hw_detach(struct ath5k_hw *ah);
+
+/* LED functions */
+extern int ath5k_init_leds(struct ath5k_softc *sc);
+extern void ath5k_led_enable(struct ath5k_softc *sc);
+extern void ath5k_led_off(struct ath5k_softc *sc);
+extern void ath5k_unregister_leds(struct ath5k_softc *sc);
+
+/* Reset Functions */
+extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
+/* Power management functions */
+extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+
+/* DMA Related Functions */
+extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
+extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
+extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+ u32 phys_addr);
+extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
+/* Interrupt handling */
+extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
+extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
+extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
+ath5k_int new_mask);
+extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
+
+/* EEPROM access functions */
+extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern void ath5k_eeprom_detach(struct ath5k_hw *ah);
+extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
+
+/* Protocol Control Unit Functions */
+extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
+/* BSSID Functions */
+extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
+extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
+extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+/* Receive start/stop functions */
+extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
+/* RX Filter functions */
+extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
+extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
+extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Beacon control functions */
+extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
+extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
+extern void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
+extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
+extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
+#if 0
+extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
+extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
+extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
+#endif
+/* ACK bit rate */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
+/* ACK/CTS Timeouts */
+extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
+extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
+/* Key table (WEP) functions */
+extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
+extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+
+/* Queue Control Unit, DFS Control Unit Functions */
+extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+ enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
+extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+
+/* Hardware Descriptor Functions */
+extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+
+/* GPIO Functions */
+extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
+extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
+extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
+extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+
+/* Misc functions */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
+extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
+extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
+
+/* Initial register settings functions */
+extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
+/* Initialize RF */
+extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ unsigned int mode);
+extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
+extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
+extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
+/* PHY/RF channel functions */
+extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
+extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+/* PHY calibration */
+extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Misc PHY functions */
+extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* TX power setup */
+extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+
+/*
+ * Functions used internaly
+ */
+
+/*
+ * Translate usec to hw clock units
+ * TODO: Half/quarter rate
+ */
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+ return turbo ? (usec * 80) : (usec * 40);
+}
+
+/*
+ * Translate hw clock units to usec
+ * TODO: Half/quarter rate
+ */
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+ return turbo ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Read from a register
+ */
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ah->ah_iobase + reg);
+}
+
+/*
+ * Write to a register
+ */
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ah->ah_iobase + reg);
+}
+
+#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
+/*
+ * Check if a register write has been completed
+ */
+static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
+ u32 val, bool is_set)
+{
+ int i;
+ u32 data;
+
+ for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+ data = ath5k_hw_reg_read(ah, reg);
+ if (is_set && (data & flag))
+ break;
+ else if ((data & flag) == val)
+ break;
+ udelay(15);
+ }
+
+ return (i <= 0) ? -EAGAIN : 0;
+}
+#endif
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+ u32 retval = 0, bit, i;
+
+ for (i = 0; i < bits; i++) {
+ bit = (val >> i) & 1;
+ retval = (retval << 1) | bit;
+ }
+
+ return retval;
+}
+
+static inline int ath5k_pad_size(int hdrlen)
+{
+ return (hdrlen < 24) ? 0 : hdrlen & 3;
+}
+
+#endif
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
new file mode 100644
index 000000000000..70d376c63aac
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -0,0 +1,348 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* Attach/Detach Functions and helpers *
+\*************************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/**
+ * ath5k_hw_post - Power On Self Test helper function
+ *
+ * @ah: The &struct ath5k_hw
+ */
+static int ath5k_hw_post(struct ath5k_hw *ah)
+{
+
+ static const u32 static_pattern[4] = {
+ 0x55555555, 0xaaaaaaaa,
+ 0x66666666, 0x99999999
+ };
+ static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) };
+ int i, c;
+ u16 cur_reg;
+ u32 var_pattern;
+ u32 init_val;
+ u32 cur_val;
+
+ for (c = 0; c < 2; c++) {
+
+ cur_reg = regs[c];
+
+ /* Save previous value */
+ init_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ for (i = 0; i < 256; i++) {
+ var_pattern = i << 16 | i;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x0039080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ for (i = 0; i < 4; i++) {
+ var_pattern = static_pattern[i];
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+ if (cur_val != var_pattern) {
+ ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+ return -EAGAIN;
+ }
+
+ /* Found on ndiswrapper dumps */
+ var_pattern = 0x003b080f;
+ ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+ }
+
+ /* Restore previous value */
+ ath5k_hw_reg_write(ah, init_val, cur_reg);
+
+ }
+
+ return 0;
+
+}
+
+/**
+ * ath5k_hw_attach - Check if hw is supported and init the needed structs
+ *
+ * @sc: The &struct ath5k_softc we got from the driver's attach function
+ * @mac_version: The mac version id (check out ath5k.h) based on pci id
+ *
+ * Check if the device is supported, perform a POST and initialize the needed
+ * structs. Returns -ENOMEM if we don't have memory for the needed structs,
+ * -ENODEV if the device is not supported or prints an error msg if something
+ * else went wrong.
+ */
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+{
+ struct ath5k_hw *ah;
+ struct pci_dev *pdev = sc->pdev;
+ int ret;
+ u32 srev;
+
+ /*If we passed the test malloc a ath5k_hw struct*/
+ ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+ if (ah == NULL) {
+ ret = -ENOMEM;
+ ATH5K_ERR(sc, "out of memory\n");
+ goto err;
+ }
+
+ ah->ah_sc = sc;
+ ah->ah_iobase = sc->iobase;
+
+ /*
+ * HW information
+ */
+ ah->ah_op_mode = NL80211_IFTYPE_STATION;
+ ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
+ ah->ah_turbo = false;
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_imr = 0;
+ ah->ah_atim_window = 0;
+ ah->ah_aifs = AR5K_TUNE_AIFS;
+ ah->ah_cw_min = AR5K_TUNE_CWMIN;
+ ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
+ ah->ah_software_retry = false;
+ ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
+
+ /*
+ * Set the mac version based on the pci id
+ */
+ ah->ah_version = mac_version;
+
+ /*Fill the ath5k_hw struct with the needed functions*/
+ ret = ath5k_hw_init_desc_functions(ah);
+ if (ret)
+ goto err_free;
+
+ /* Bring device out of sleep and reset it's units */
+ ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+ if (ret)
+ goto err_free;
+
+ /* Get MAC, PHY and RADIO revisions */
+ srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+ ah->ah_mac_srev = srev;
+ ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+ ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+ ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+ 0xffffffff;
+ ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_5GHZ);
+ ah->ah_phy = AR5K_PHY(0);
+
+ /* Try to identify radio chip based on it's srev */
+ switch (ah->ah_radio_5ghz_revision & 0xf0) {
+ case AR5K_SREV_RAD_5111:
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ break;
+ case AR5K_SREV_RAD_5112:
+ case AR5K_SREV_RAD_2112:
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ break;
+ case AR5K_SREV_RAD_2413:
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_5413:
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_2316:
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_2317:
+ ah->ah_radio = AR5K_RF2317;
+ ah->ah_single_chip = true;
+ break;
+ case AR5K_SREV_RAD_5424:
+ if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+ ah->ah_mac_version == AR5K_SREV_AR2417){
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ } else {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ }
+ break;
+ default:
+ /* Identify radio based on mac/phy srev */
+ if (ah->ah_version == AR5K_AR5210) {
+ ah->ah_radio = AR5K_RF5110;
+ ah->ah_single_chip = false;
+ } else if (ah->ah_version == AR5K_AR5211) {
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+ ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
+ } else if (srev == AR5K_SREV_AR5213A &&
+ ah->ah_phy_revision == AR5K_SREV_PHY_5212B) {
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
+ } else {
+ ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+ }
+
+
+ /* Return on unsuported chips (unsupported eeprom etc) */
+ if ((srev >= AR5K_SREV_AR5416) &&
+ (srev < AR5K_SREV_AR2425)) {
+ ATH5K_ERR(sc, "Device not yet supported.\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ /*
+ * Write PCI-E power save settings
+ */
+ if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+ ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+ /* Shut off RX when elecidle is asserted */
+ ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+ /* TODO: EEPROM work */
+ ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+ /* Shut off PLL and CLKREQ active in L1 */
+ ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+ /* Preserce other settings */
+ ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+ /* Reset SERDES to load new settings */
+ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+ mdelay(1);
+ }
+
+ /*
+ * POST
+ */
+ ret = ath5k_hw_post(ah);
+ if (ret)
+ goto err_free;
+
+ /* Enable pci core retry fix on Hainan (5213A) and later chips */
+ if (srev >= AR5K_SREV_AR5213A)
+ ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);
+
+ /*
+ * Get card capabilities, calibration values etc
+ * TODO: EEPROM work
+ */
+ ret = ath5k_eeprom_init(ah);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to init EEPROM\n");
+ goto err_free;
+ }
+
+ /* Get misc capabilities */
+ ret = ath5k_hw_set_capabilities(ah);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
+ sc->pdev->device);
+ goto err_free;
+ }
+
+ if (srev >= AR5K_SREV_AR2414) {
+ ah->ah_combined_mic = true;
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE,
+ AR5K_MISC_MODE_COMBINED_MIC);
+ }
+
+ /* MAC address is cleared until add_interface */
+ ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){});
+
+ /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+ memset(ah->ah_bssid, 0xff, ETH_ALEN);
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ ath5k_hw_set_opmode(ah);
+
+ ath5k_hw_rfgain_opt_init(ah);
+
+ return ah;
+err_free:
+ kfree(ah);
+err:
+ return ERR_PTR(ret);
+}
+
+/**
+ * ath5k_hw_detach - Free the ath5k_hw struct
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_detach(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ __set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
+
+ if (ah->ah_rf_banks != NULL)
+ kfree(ah->ah_rf_banks);
+
+ ath5k_eeprom_detach(ah);
+
+ /* assume interrupts are down */
+ kfree(ah);
+}
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
new file mode 100644
index 000000000000..ff6d4f839734
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -0,0 +1,3110 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+#include <linux/if.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/cache.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/uaccess.h>
+
+#include <net/ieee80211_radiotap.h>
+
+#include <asm/unaligned.h>
+
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+
+static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
+static int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+static int modparam_all_channels;
+module_param_named(all_channels, modparam_all_channels, int, 0444);
+MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+
+
+/******************\
+* Internal defines *
+\******************/
+
+/* Module info */
+MODULE_AUTHOR("Jiri Slaby");
+MODULE_AUTHOR("Nick Kossifidis");
+MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
+
+
+/* Known PCI ids */
+static const struct pci_device_id ath5k_pci_id_table[] = {
+ { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
+ { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
+ { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
+ { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
+ { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
+ { PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
+ { PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
+ { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
+ { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
+ { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+/* Known SREVs */
+static const struct ath5k_srev_name srev_names[] = {
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
+ { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
+ { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
+ { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
+ { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
+ { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
+ { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
+ { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
+ { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+ { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
+};
+
+static const struct ieee80211_rate ath5k_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ATH5K_RATE_CODE_1M, },
+ { .bitrate = 20,
+ .hw_value = ATH5K_RATE_CODE_2M,
+ .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ATH5K_RATE_CODE_5_5M,
+ .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ATH5K_RATE_CODE_11M,
+ .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ATH5K_RATE_CODE_6M,
+ .flags = 0 },
+ { .bitrate = 90,
+ .hw_value = ATH5K_RATE_CODE_9M,
+ .flags = 0 },
+ { .bitrate = 120,
+ .hw_value = ATH5K_RATE_CODE_12M,
+ .flags = 0 },
+ { .bitrate = 180,
+ .hw_value = ATH5K_RATE_CODE_18M,
+ .flags = 0 },
+ { .bitrate = 240,
+ .hw_value = ATH5K_RATE_CODE_24M,
+ .flags = 0 },
+ { .bitrate = 360,
+ .hw_value = ATH5K_RATE_CODE_36M,
+ .flags = 0 },
+ { .bitrate = 480,
+ .hw_value = ATH5K_RATE_CODE_48M,
+ .flags = 0 },
+ { .bitrate = 540,
+ .hw_value = ATH5K_RATE_CODE_54M,
+ .flags = 0 },
+ /* XR missing */
+};
+
+/*
+ * Prototypes - PCI stack related functions
+ */
+static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
+#ifdef CONFIG_PM
+static int ath5k_pci_suspend(struct pci_dev *pdev,
+ pm_message_t state);
+static int ath5k_pci_resume(struct pci_dev *pdev);
+#else
+#define ath5k_pci_suspend NULL
+#define ath5k_pci_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_driver ath5k_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ath5k_pci_id_table,
+ .probe = ath5k_pci_probe,
+ .remove = __devexit_p(ath5k_pci_remove),
+ .suspend = ath5k_pci_suspend,
+ .resume = ath5k_pci_resume,
+};
+
+
+
+/*
+ * Prototypes - MAC 802.11 stack related functions
+ */
+static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
+static int ath5k_start(struct ieee80211_hw *hw);
+static void ath5k_stop(struct ieee80211_hw *hw);
+static int ath5k_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+static void ath5k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
+static int ath5k_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf);
+static void ath5k_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *new_flags,
+ int mc_count, struct dev_mc_list *mclist);
+static int ath5k_set_key(struct ieee80211_hw *hw,
+ enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key);
+static int ath5k_get_stats(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats);
+static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
+ struct ieee80211_tx_queue_stats *stats);
+static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
+static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
+static void ath5k_reset_tsf(struct ieee80211_hw *hw);
+static int ath5k_beacon_update(struct ath5k_softc *sc,
+ struct sk_buff *skb);
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes);
+
+static const struct ieee80211_ops ath5k_hw_ops = {
+ .tx = ath5k_tx,
+ .start = ath5k_start,
+ .stop = ath5k_stop,
+ .add_interface = ath5k_add_interface,
+ .remove_interface = ath5k_remove_interface,
+ .config = ath5k_config,
+ .config_interface = ath5k_config_interface,
+ .configure_filter = ath5k_configure_filter,
+ .set_key = ath5k_set_key,
+ .get_stats = ath5k_get_stats,
+ .conf_tx = NULL,
+ .get_tx_stats = ath5k_get_tx_stats,
+ .get_tsf = ath5k_get_tsf,
+ .set_tsf = ath5k_set_tsf,
+ .reset_tsf = ath5k_reset_tsf,
+ .bss_info_changed = ath5k_bss_info_changed,
+};
+
+/*
+ * Prototypes - Internal functions
+ */
+/* Attach detach */
+static int ath5k_attach(struct pci_dev *pdev,
+ struct ieee80211_hw *hw);
+static void ath5k_detach(struct pci_dev *pdev,
+ struct ieee80211_hw *hw);
+/* Channel/mode setup */
+static inline short ath5k_ieee2mhz(short chan);
+static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
+ struct ieee80211_channel *channels,
+ unsigned int mode,
+ unsigned int max);
+static int ath5k_setup_bands(struct ieee80211_hw *hw);
+static int ath5k_chan_set(struct ath5k_softc *sc,
+ struct ieee80211_channel *chan);
+static void ath5k_setcurmode(struct ath5k_softc *sc,
+ unsigned int mode);
+static void ath5k_mode_setup(struct ath5k_softc *sc);
+
+/* Descriptor setup */
+static int ath5k_desc_alloc(struct ath5k_softc *sc,
+ struct pci_dev *pdev);
+static void ath5k_desc_free(struct ath5k_softc *sc,
+ struct pci_dev *pdev);
+/* Buffers setup */
+static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
+ struct ath5k_buf *bf);
+static int ath5k_txbuf_setup(struct ath5k_softc *sc,
+ struct ath5k_buf *bf);
+static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
+ struct ath5k_buf *bf)
+{
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+}
+
+static inline void ath5k_rxbuf_free(struct ath5k_softc *sc,
+ struct ath5k_buf *bf)
+{
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+}
+
+
+/* Queues setup */
+static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
+ int qtype, int subtype);
+static int ath5k_beaconq_setup(struct ath5k_hw *ah);
+static int ath5k_beaconq_config(struct ath5k_softc *sc);
+static void ath5k_txq_drainq(struct ath5k_softc *sc,
+ struct ath5k_txq *txq);
+static void ath5k_txq_cleanup(struct ath5k_softc *sc);
+static void ath5k_txq_release(struct ath5k_softc *sc);
+/* Rx handling */
+static int ath5k_rx_start(struct ath5k_softc *sc);
+static void ath5k_rx_stop(struct ath5k_softc *sc);
+static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
+ struct ath5k_desc *ds,
+ struct sk_buff *skb,
+ struct ath5k_rx_status *rs);
+static void ath5k_tasklet_rx(unsigned long data);
+/* Tx handling */
+static void ath5k_tx_processq(struct ath5k_softc *sc,
+ struct ath5k_txq *txq);
+static void ath5k_tasklet_tx(unsigned long data);
+/* Beacon handling */
+static int ath5k_beacon_setup(struct ath5k_softc *sc,
+ struct ath5k_buf *bf);
+static void ath5k_beacon_send(struct ath5k_softc *sc);
+static void ath5k_beacon_config(struct ath5k_softc *sc);
+static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
+static void ath5k_tasklet_beacon(unsigned long data);
+
+static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
+{
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+
+ if ((tsf & 0x7fff) < rstamp)
+ tsf -= 0x8000;
+
+ return (tsf & ~0x7fff) | rstamp;
+}
+
+/* Interrupt handling */
+static int ath5k_init(struct ath5k_softc *sc);
+static int ath5k_stop_locked(struct ath5k_softc *sc);
+static int ath5k_stop_hw(struct ath5k_softc *sc);
+static irqreturn_t ath5k_intr(int irq, void *dev_id);
+static void ath5k_tasklet_reset(unsigned long data);
+
+static void ath5k_calibrate(unsigned long data);
+
+/*
+ * Module init/exit functions
+ */
+static int __init
+init_ath5k_pci(void)
+{
+ int ret;
+
+ ath5k_debug_init();
+
+ ret = pci_register_driver(&ath5k_pci_driver);
+ if (ret) {
+ printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __exit
+exit_ath5k_pci(void)
+{
+ pci_unregister_driver(&ath5k_pci_driver);
+
+ ath5k_debug_finish();
+}
+
+module_init(init_ath5k_pci);
+module_exit(exit_ath5k_pci);
+
+
+/********************\
+* PCI Initialization *
+\********************/
+
+static const char *
+ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
+{
+ const char *name = "xxxxx";
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
+ if (srev_names[i].sr_type != type)
+ continue;
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
+ name = srev_names[i].sr_name;
+ break;
+ }
+ }
+
+ return name;
+}
+
+static int __devinit
+ath5k_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ void __iomem *mem;
+ struct ath5k_softc *sc;
+ struct ieee80211_hw *hw;
+ int ret;
+ u8 csz;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable device\n");
+ goto err;
+ }
+
+ /* XXX 32-bit addressing only */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "32-bit DMA not available\n");
+ goto err_dis;
+ }
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+ if (csz == 0) {
+ /*
+ * Linux 2.4.18 (at least) writes the cache line size
+ * register as a 16-bit wide register which is wrong.
+ * We must have this setup properly for rx buffer
+ * DMA to work so force a reasonable value here if it
+ * comes up zero.
+ */
+ csz = L1_CACHE_BYTES / sizeof(u32);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+ }
+ /*
+ * The default setting of latency timer yields poor results,
+ * set it to the value used by other systems. It may be worth
+ * tweaking this setting more.
+ */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+ /* Enable bus mastering */
+ pci_set_master(pdev);
+
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ ret = pci_request_region(pdev, 0, "ath5k");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+ goto err_dis;
+ }
+
+ mem = pci_iomap(pdev, 0, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
+ ret = -EIO;
+ goto err_reg;
+ }
+
+ /*
+ * Allocate hw (mac80211 main struct)
+ * and hw->priv (driver private data)
+ */
+ hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
+ /* Initialize driver private data */
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ hw->extra_tx_headroom = 2;
+ hw->channel_change_time = 5000;
+ sc = hw->priv;
+ sc->hw = hw;
+ sc->pdev = pdev;
+
+ ath5k_debug_init_device(sc);
+
+ /*
+ * Mark the device as detached to avoid processing
+ * interrupts until setup is complete.
+ */
+ __set_bit(ATH_STAT_INVALID, sc->status);
+
+ sc->iobase = mem; /* So we can unmap it on detach */
+ sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
+ sc->opmode = NL80211_IFTYPE_STATION;
+ mutex_init(&sc->lock);
+ spin_lock_init(&sc->rxbuflock);
+ spin_lock_init(&sc->txbuflock);
+ spin_lock_init(&sc->block);
+
+ /* Set private data */
+ pci_set_drvdata(pdev, hw);
+
+ /* Setup interrupt handler */
+ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (ret) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err_free;
+ }
+
+ /* Initialize device */
+ sc->ah = ath5k_hw_attach(sc, id->driver_data);
+ if (IS_ERR(sc->ah)) {
+ ret = PTR_ERR(sc->ah);
+ goto err_irq;
+ }
+
+ /* set up multi-rate retry capabilities */
+ if (sc->ah->ah_version == AR5K_AR5212) {
+ hw->max_rates = 4;
+ hw->max_rate_tries = 11;
+ }
+
+ /* Finish private driver data initialization */
+ ret = ath5k_attach(pdev, hw);
+ if (ret)
+ goto err_ah;
+
+ ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
+ sc->ah->ah_mac_srev,
+ sc->ah->ah_phy_revision);
+
+ if (!sc->ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (sc->ah->ah_radio_5ghz_revision &&
+ !sc->ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!test_bit(AR5K_MODE_11A,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5Ghz only cards) -> report 5Ghz radio */
+ } else if (!test_bit(AR5K_MODE_11B,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ ATH5K_INFO(sc, "RF%s multiband radio found"
+ " (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (sc->ah->ah_radio_5ghz_revision &&
+ sc->ah->ah_radio_2ghz_revision){
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_2ghz_revision),
+ sc->ah->ah_radio_2ghz_revision);
+ }
+ }
+
+
+ /* ready to process interrupts */
+ __clear_bit(ATH_STAT_INVALID, sc->status);
+
+ return 0;
+err_ah:
+ ath5k_hw_detach(sc->ah);
+err_irq:
+ free_irq(pdev->irq, sc);
+err_free:
+ ieee80211_free_hw(hw);
+err_map:
+ pci_iounmap(pdev, mem);
+err_reg:
+ pci_release_region(pdev, 0);
+err_dis:
+ pci_disable_device(pdev);
+err:
+ return ret;
+}
+
+static void __devexit
+ath5k_pci_remove(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
+
+ ath5k_debug_finish_device(sc);
+ ath5k_detach(pdev, hw);
+ ath5k_hw_detach(sc->ah);
+ free_irq(pdev->irq, sc);
+ pci_iounmap(pdev, sc->iobase);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM
+static int
+ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
+
+ ath5k_led_off(sc);
+
+ free_irq(pdev->irq, sc);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int
+ath5k_pci_resume(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
+ int err;
+
+ pci_restore_state(pdev);
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (err) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err_no_irq;
+ }
+
+ ath5k_led_enable(sc);
+ return 0;
+
+err_no_irq:
+ pci_disable_device(pdev);
+ return err;
+}
+#endif /* CONFIG_PM */
+
+
+/***********************\
+* Driver Initialization *
+\***********************/
+
+static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct ath5k_softc *sc = hw->priv;
+ struct ath_regulatory *reg = &sc->ah->ah_regulatory;
+
+ return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
+static int
+ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ u8 mac[ETH_ALEN] = {};
+ int ret;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
+
+ /*
+ * Check if the MAC has multi-rate retry support.
+ * We do this by trying to setup a fake extended
+ * descriptor. MAC's that don't have support will
+ * return false w/o doing anything. MAC's that do
+ * support it will return true w/o doing anything.
+ */
+ ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+ if (ret < 0)
+ goto err;
+ if (ret > 0)
+ __set_bit(ATH_STAT_MRRETRY, sc->status);
+
+ /*
+ * Collect the channel list. The 802.11 layer
+ * is resposible for filtering this list based
+ * on settings like the phy mode and regulatory
+ * domain restrictions.
+ */
+ ret = ath5k_setup_bands(hw);
+ if (ret) {
+ ATH5K_ERR(sc, "can't get channels\n");
+ goto err;
+ }
+
+ /* NB: setup here so ath5k_rate_update is happy */
+ if (test_bit(AR5K_MODE_11A, ah->ah_modes))
+ ath5k_setcurmode(sc, AR5K_MODE_11A);
+ else
+ ath5k_setcurmode(sc, AR5K_MODE_11B);
+
+ /*
+ * Allocate tx+rx descriptors and populate the lists.
+ */
+ ret = ath5k_desc_alloc(sc, pdev);
+ if (ret) {
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
+ goto err;
+ }
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that hw functions handle reseting
+ * these queues at the needed time.
+ */
+ ret = ath5k_beaconq_setup(ah);
+ if (ret < 0) {
+ ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
+ goto err_desc;
+ }
+ sc->bhalq = ret;
+
+ sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+ if (IS_ERR(sc->txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(sc->txq);
+ goto err_bhal;
+ }
+
+ tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
+ tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
+ tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
+ tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
+ setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
+
+ ret = ath5k_eeprom_read_mac(ah, mac);
+ if (ret) {
+ ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+ sc->pdev->device);
+ goto err_queues;
+ }
+
+ SET_IEEE80211_PERM_ADDR(hw, mac);
+ /* All MAC address bits matter for ACKs */
+ memset(sc->bssidmask, 0xff, ETH_ALEN);
+ ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
+
+ ah->ah_regulatory.current_rd =
+ ah->ah_capabilities.cap_eeprom.ee_regdomain;
+ ret = ath_regd_init(&ah->ah_regulatory, hw->wiphy, ath5k_reg_notifier);
+ if (ret) {
+ ATH5K_ERR(sc, "can't initialize regulatory system\n");
+ goto err_queues;
+ }
+
+ ret = ieee80211_register_hw(hw);
+ if (ret) {
+ ATH5K_ERR(sc, "can't register ieee80211 hw\n");
+ goto err_queues;
+ }
+
+ if (!ath_is_world_regd(&sc->ah->ah_regulatory))
+ regulatory_hint(hw->wiphy, sc->ah->ah_regulatory.alpha2);
+
+ ath5k_init_leds(sc);
+
+ return 0;
+err_queues:
+ ath5k_txq_release(sc);
+err_bhal:
+ ath5k_hw_release_tx_queue(ah, sc->bhalq);
+err_desc:
+ ath5k_desc_free(sc, pdev);
+err:
+ return ret;
+}
+
+static void
+ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ /*
+ * NB: the order of these is important:
+ * o call the 802.11 layer before detaching ath5k_hw to
+ * insure callbacks into the driver to delete global
+ * key cache entries can be handled
+ * o reclaim the tx queue data structures after calling
+ * the 802.11 layer as we'll get called back to reclaim
+ * node state and potentially want to use them
+ * o to cleanup the tx queues the hal is called, so detach
+ * it last
+ * XXX: ??? detach ath5k_hw ???
+ * Other than that, it's straightforward...
+ */
+ ieee80211_unregister_hw(hw);
+ ath5k_desc_free(sc, pdev);
+ ath5k_txq_release(sc);
+ ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
+ ath5k_unregister_leds(sc);
+
+ /*
+ * NB: can't reclaim these until after ieee80211_ifdetach
+ * returns because we'll get called back to reclaim node
+ * state and potentially want to use them.
+ */
+}
+
+
+
+
+/********************\
+* Channel/mode setup *
+\********************/
+
+/*
+ * Convert IEEE channel number to MHz frequency.
+ */
+static inline short
+ath5k_ieee2mhz(short chan)
+{
+ if (chan <= 14 || chan >= 27)
+ return ieee80211chan2mhz(chan);
+ else
+ return 2212 + chan * 20;
+}
+
+/*
+ * Returns true for the channel numbers used without all_channels modparam.
+ */
+static bool ath5k_is_standard_channel(short chan)
+{
+ return ((chan <= 14) ||
+ /* UNII 1,2 */
+ ((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
+ /* midband */
+ ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
+ /* UNII-3 */
+ ((chan & 3) == 1 && chan >= 149 && chan <= 165));
+}
+
+static unsigned int
+ath5k_copy_channels(struct ath5k_hw *ah,
+ struct ieee80211_channel *channels,
+ unsigned int mode,
+ unsigned int max)
+{
+ unsigned int i, count, size, chfreq, freq, ch;
+
+ if (!test_bit(mode, ah->ah_modes))
+ return 0;
+
+ switch (mode) {
+ case AR5K_MODE_11A:
+ case AR5K_MODE_11A_TURBO:
+ /* 1..220, but 2GHz frequencies are filtered by check_channel */
+ size = 220 ;
+ chfreq = CHANNEL_5GHZ;
+ break;
+ case AR5K_MODE_11B:
+ case AR5K_MODE_11G:
+ case AR5K_MODE_11G_TURBO:
+ size = 26;
+ chfreq = CHANNEL_2GHZ;
+ break;
+ default:
+ ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
+ return 0;
+ }
+
+ for (i = 0, count = 0; i < size && max > 0; i++) {
+ ch = i + 1 ;
+ freq = ath5k_ieee2mhz(ch);
+
+ /* Check if channel is supported by the chipset */
+ if (!ath5k_channel_ok(ah, freq, chfreq))
+ continue;
+
+ if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
+ continue;
+
+ /* Write channel info and increment counter */
+ channels[count].center_freq = freq;
+ channels[count].band = (chfreq == CHANNEL_2GHZ) ?
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+ switch (mode) {
+ case AR5K_MODE_11A:
+ case AR5K_MODE_11G:
+ channels[count].hw_value = chfreq | CHANNEL_OFDM;
+ break;
+ case AR5K_MODE_11A_TURBO:
+ case AR5K_MODE_11G_TURBO:
+ channels[count].hw_value = chfreq |
+ CHANNEL_OFDM | CHANNEL_TURBO;
+ break;
+ case AR5K_MODE_11B:
+ channels[count].hw_value = CHANNEL_B;
+ }
+
+ count++;
+ max--;
+ }
+
+ return count;
+}
+
+static void
+ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
+{
+ u8 i;
+
+ for (i = 0; i < AR5K_MAX_RATES; i++)
+ sc->rate_idx[b->band][i] = -1;
+
+ for (i = 0; i < b->n_bitrates; i++) {
+ sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+ if (b->bitrates[i].hw_value_short)
+ sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+ }
+}
+
+static int
+ath5k_setup_bands(struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ struct ieee80211_supported_band *sband;
+ int max_c, count_c = 0;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
+ max_c = ARRAY_SIZE(sc->channels);
+
+ /* 2GHz band */
+ sband = &sc->sbands[IEEE80211_BAND_2GHZ];
+ sband->band = IEEE80211_BAND_2GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
+
+ if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
+ /* G mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 12);
+ sband->n_bitrates = 12;
+
+ sband->channels = sc->channels;
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+ AR5K_MODE_11G, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
+ /* B mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 4);
+ sband->n_bitrates = 4;
+
+ /* 5211 only supports B rates and uses 4bit rate codes
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+ * fix them up here:
+ */
+ if (ah->ah_version == AR5K_AR5211) {
+ for (i = 0; i < 4; i++) {
+ sband->bitrates[i].hw_value =
+ sband->bitrates[i].hw_value & 0xF;
+ sband->bitrates[i].hw_value_short =
+ sband->bitrates[i].hw_value_short & 0xF;
+ }
+ }
+
+ sband->channels = sc->channels;
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+ AR5K_MODE_11B, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ }
+ ath5k_setup_rate_idx(sc, sband);
+
+ /* 5GHz band, A mode */
+ if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
+ sband = &sc->sbands[IEEE80211_BAND_5GHZ];
+ sband->band = IEEE80211_BAND_5GHZ;
+ sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
+
+ memcpy(sband->bitrates, &ath5k_rates[4],
+ sizeof(struct ieee80211_rate) * 8);
+ sband->n_bitrates = 8;
+
+ sband->channels = &sc->channels[count_c];
+ sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+ AR5K_MODE_11A, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
+ }
+ ath5k_setup_rate_idx(sc, sband);
+
+ ath5k_debug_dump_bands(sc);
+
+ return 0;
+}
+
+/*
+ * Set/change channels. If the channel is really being changed,
+ * it's done by reseting the chip. To accomplish this we must
+ * first cleanup any pending DMA, then restart stuff after a la
+ * ath5k_init.
+ *
+ * Called with sc->lock.
+ */
+static int
+ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+{
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
+ sc->curchan->center_freq, chan->center_freq);
+
+ if (chan->center_freq != sc->curchan->center_freq ||
+ chan->hw_value != sc->curchan->hw_value) {
+
+ sc->curchan = chan;
+ sc->curband = &sc->sbands[chan->band];
+
+ /*
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ return ath5k_reset(sc, true, true);
+ }
+
+ return 0;
+}
+
+static void
+ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
+{
+ sc->curmode = mode;
+
+ if (mode == AR5K_MODE_11A) {
+ sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
+ } else {
+ sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
+ }
+}
+
+static void
+ath5k_mode_setup(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ u32 rfilt;
+
+ /* configure rx filter */
+ rfilt = sc->filter_flags;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+
+ if (ath5k_hw_hasbssidmask(ah))
+ ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
+
+ /* configure operational mode */
+ ath5k_hw_set_opmode(ah);
+
+ ath5k_hw_set_mcast_filter(ah, 0, 0);
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
+}
+
+static inline int
+ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
+{
+ int rix;
+
+ /* return base rate on errors */
+ if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
+ "hw_rix out of bounds: %x\n", hw_rix))
+ return 0;
+
+ rix = sc->rate_idx[sc->curband->band][hw_rix];
+ if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
+ rix = 0;
+
+ return rix;
+}
+
+/***************\
+* Buffers setup *
+\***************/
+
+static
+struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
+{
+ struct sk_buff *skb;
+ unsigned int off;
+
+ /*
+ * Allocate buffer with headroom_needed space for the
+ * fake physical layer header at the start.
+ */
+ skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
+
+ if (!skb) {
+ ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
+ sc->rxbufsize + sc->cachelsz - 1);
+ return NULL;
+ }
+ /*
+ * Cache-line-align. This is important (for the
+ * 5210 at least) as not doing so causes bogus data
+ * in rx'd frames.
+ */
+ off = ((unsigned long)skb->data) % sc->cachelsz;
+ if (off != 0)
+ skb_reserve(skb, sc->cachelsz - off);
+
+ *skb_addr = pci_map_single(sc->pdev,
+ skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
+ if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+ ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ return skb;
+}
+
+static int
+ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct sk_buff *skb = bf->skb;
+ struct ath5k_desc *ds;
+
+ if (!skb) {
+ skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
+ if (!skb)
+ return -ENOMEM;
+ bf->skb = skb;
+ }
+
+ /*
+ * Setup descriptors. For receive we always terminate
+ * the descriptor list with a self-linked entry so we'll
+ * not get overrun under high load (as can happen with a
+ * 5212 when ANI processing enables PHY error frames).
+ *
+ * To insure the last descriptor is self-linked we create
+ * each descriptor as self-linked and add it to the end. As
+ * each additional descriptor is added the previous self-linked
+ * entry is ``fixed'' naturally. This should be safe even
+ * if DMA is happening. When processing RX interrupts we
+ * never remove/process the last, self-linked, entry on the
+ * descriptor list. This insures the hardware always has
+ * someplace to write a new frame.
+ */
+ ds = bf->desc;
+ ds->ds_link = bf->daddr; /* link to self */
+ ds->ds_data = bf->skbaddr;
+ ah->ah_setup_rx_desc(ah, ds,
+ skb_tailroom(skb), /* buffer size */
+ 0);
+
+ if (sc->rxlink != NULL)
+ *sc->rxlink = bf->daddr;
+ sc->rxlink = &ds->ds_link;
+ return 0;
+}
+
+static int
+ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq *txq = sc->txq;
+ struct ath5k_desc *ds = bf->desc;
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
+ struct ieee80211_rate *rate;
+ unsigned int mrr_rate[3], mrr_tries[3];
+ int i, ret;
+ u16 hw_rate;
+ u16 cts_rate = 0;
+ u16 duration = 0;
+ u8 rc_flags;
+
+ flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
+
+ /* XXX endianness */
+ bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+
+ rate = ieee80211_get_tx_rate(sc->hw, info);
+
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ flags |= AR5K_TXDESC_NOACK;
+
+ rc_flags = info->control.rates[0].flags;
+ hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
+ rate->hw_value_short : rate->hw_value;
+
+ pktlen = skb->len;
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ if (info->control.hw_key) {
+ keyidx = info->control.hw_key->hw_key_idx;
+ pktlen += info->control.hw_key->icv_len;
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ flags |= AR5K_TXDESC_RTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
+ sc->vif, pktlen, info));
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ flags |= AR5K_TXDESC_CTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
+ sc->vif, pktlen, info));
+ }
+ ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
+ ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
+ (sc->power_level * 2),
+ hw_rate,
+ info->control.rates[0].count, keyidx, 0, flags,
+ cts_rate, duration);
+ if (ret)
+ goto err_unmap;
+
+ memset(mrr_rate, 0, sizeof(mrr_rate));
+ memset(mrr_tries, 0, sizeof(mrr_tries));
+ for (i = 0; i < 3; i++) {
+ rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
+ if (!rate)
+ break;
+
+ mrr_rate[i] = rate->hw_value;
+ mrr_tries[i] = info->control.rates[i + 1].count;
+ }
+
+ ah->ah_setup_mrr_tx_desc(ah, ds,
+ mrr_rate[0], mrr_tries[0],
+ mrr_rate[1], mrr_tries[1],
+ mrr_rate[2], mrr_tries[2]);
+
+ ds->ds_link = 0;
+ ds->ds_data = bf->skbaddr;
+
+ spin_lock_bh(&txq->lock);
+ list_add_tail(&bf->list, &txq->q);
+ sc->tx_stats[txq->qnum].len++;
+ if (txq->link == NULL) /* is this first packet? */
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
+ else /* no, so only link it */
+ *txq->link = bf->daddr;
+
+ txq->link = &ds->ds_link;
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
+ mmiowb();
+ spin_unlock_bh(&txq->lock);
+
+ return 0;
+err_unmap:
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+ return ret;
+}
+
+/*******************\
+* Descriptors setup *
+\*******************/
+
+static int
+ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ dma_addr_t da;
+ unsigned int i;
+ int ret;
+
+ /* allocate descriptors */
+ sc->desc_len = sizeof(struct ath5k_desc) *
+ (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
+ sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
+ if (sc->desc == NULL) {
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ ds = sc->desc;
+ da = sc->desc_daddr;
+ ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
+ ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
+
+ bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
+ sizeof(struct ath5k_buf), GFP_KERNEL);
+ if (bf == NULL) {
+ ATH5K_ERR(sc, "can't allocate bufptr\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+ sc->bufptr = bf;
+
+ INIT_LIST_HEAD(&sc->rxbuf);
+ for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &sc->rxbuf);
+ }
+
+ INIT_LIST_HEAD(&sc->txbuf);
+ sc->txbuf_len = ATH_TXBUF;
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
+ da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &sc->txbuf);
+ }
+
+ /* beacon buffer */
+ bf->desc = ds;
+ bf->daddr = da;
+ sc->bbuf = bf;
+
+ return 0;
+err_free:
+ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+err:
+ sc->desc = NULL;
+ return ret;
+}
+
+static void
+ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
+{
+ struct ath5k_buf *bf;
+
+ ath5k_txbuf_free(sc, sc->bbuf);
+ list_for_each_entry(bf, &sc->txbuf, list)
+ ath5k_txbuf_free(sc, bf);
+ list_for_each_entry(bf, &sc->rxbuf, list)
+ ath5k_rxbuf_free(sc, bf);
+
+ /* Free memory associated with all descriptors */
+ pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+
+ kfree(sc->bufptr);
+ sc->bufptr = NULL;
+}
+
+
+
+
+
+/**************\
+* Queues setup *
+\**************/
+
+static struct ath5k_txq *
+ath5k_txq_setup(struct ath5k_softc *sc,
+ int qtype, int subtype)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq *txq;
+ struct ath5k_txq_info qi = {
+ .tqi_subtype = subtype,
+ .tqi_aifs = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_max = AR5K_TXQ_USEDEFAULT
+ };
+ int qnum;
+
+ /*
+ * Enable interrupts only for EOL and DESC conditions.
+ * We mark tx descriptors to receive a DESC interrupt
+ * when a tx queue gets deep; otherwise waiting for the
+ * EOL to reap descriptors. Note that this is done to
+ * reduce interrupt load and this only defers reaping
+ * descriptors, never transmitting frames. Aside from
+ * reducing interrupts this also permits more concurrency.
+ * The only potential downside is if the tx queue backs
+ * up in which case the top half of the kernel may backup
+ * due to a lack of tx descriptors.
+ */
+ qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
+ AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
+ qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
+ if (qnum < 0) {
+ /*
+ * NB: don't print a message, this happens
+ * normally on parts with too few tx queues
+ */
+ return ERR_PTR(qnum);
+ }
+ if (qnum >= ARRAY_SIZE(sc->txqs)) {
+ ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
+ qnum, ARRAY_SIZE(sc->txqs));
+ ath5k_hw_release_tx_queue(ah, qnum);
+ return ERR_PTR(-EINVAL);
+ }
+ txq = &sc->txqs[qnum];
+ if (!txq->setup) {
+ txq->qnum = qnum;
+ txq->link = NULL;
+ INIT_LIST_HEAD(&txq->q);
+ spin_lock_init(&txq->lock);
+ txq->setup = true;
+ }
+ return &sc->txqs[qnum];
+}
+
+static int
+ath5k_beaconq_setup(struct ath5k_hw *ah)
+{
+ struct ath5k_txq_info qi = {
+ .tqi_aifs = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
+ .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
+ /* NB: for dynamic turbo, don't enable any other interrupts */
+ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
+ };
+
+ return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
+}
+
+static int
+ath5k_beaconq_config(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_txq_info qi;
+ int ret;
+
+ ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
+ if (ret)
+ return ret;
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
+ /*
+ * Always burst out beacon and CAB traffic
+ * (aifs = cwmin = cwmax = 0)
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 0;
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+ /*
+ * Adhoc mode; backoff between 0 and (2 * cw_min).
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 2 * ah->ah_cw_min;
+ }
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
+ qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
+
+ ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
+ if (ret) {
+ ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
+ "hardware queue!\n", __func__);
+ return ret;
+ }
+
+ return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
+}
+
+static void
+ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+ struct ath5k_buf *bf, *bf0;
+
+ /*
+ * NB: this assumes output has been stopped and
+ * we do not need to block ath5k_tx_tasklet
+ */
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_debug_printtxbuf(sc, bf);
+
+ ath5k_txbuf_free(sc, bf);
+
+ spin_lock_bh(&sc->txbuflock);
+ sc->tx_stats[txq->qnum].len--;
+ list_move_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ spin_unlock_bh(&sc->txbuflock);
+ }
+ txq->link = NULL;
+ spin_unlock_bh(&txq->lock);
+}
+
+/*
+ * Drain the transmit queues and reclaim resources.
+ */
+static void
+ath5k_txq_cleanup(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ unsigned int i;
+
+ /* XXX return value */
+ if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
+ /* don't touch the hardware if marked invalid */
+ ath5k_hw_stop_tx_dma(ah, sc->bhalq);
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
+ ath5k_hw_get_txdp(ah, sc->bhalq));
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
+ if (sc->txqs[i].setup) {
+ ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
+ "link %p\n",
+ sc->txqs[i].qnum,
+ ath5k_hw_get_txdp(ah,
+ sc->txqs[i].qnum),
+ sc->txqs[i].link);
+ }
+ }
+ ieee80211_wake_queues(sc->hw); /* XXX move to callers */
+
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
+ if (sc->txqs[i].setup)
+ ath5k_txq_drainq(sc, &sc->txqs[i]);
+}
+
+static void
+ath5k_txq_release(struct ath5k_softc *sc)
+{
+ struct ath5k_txq *txq = sc->txqs;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
+ if (txq->setup) {
+ ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
+ txq->setup = false;
+ }
+}
+
+
+
+
+/*************\
+* RX Handling *
+\*************/
+
+/*
+ * Enable the receive h/w following a reset.
+ */
+static int
+ath5k_rx_start(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_buf *bf;
+ int ret;
+
+ sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
+ sc->cachelsz, sc->rxbufsize);
+
+ sc->rxlink = NULL;
+
+ spin_lock_bh(&sc->rxbuflock);
+ list_for_each_entry(bf, &sc->rxbuf, list) {
+ ret = ath5k_rxbuf_setup(sc, bf);
+ if (ret != 0) {
+ spin_unlock_bh(&sc->rxbuflock);
+ goto err;
+ }
+ }
+ bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+ spin_unlock_bh(&sc->rxbuflock);
+
+ ath5k_hw_set_rxdp(ah, bf->daddr);
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
+ ath5k_mode_setup(sc); /* set filters, etc. */
+ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
+
+ return 0;
+err:
+ return ret;
+}
+
+/*
+ * Disable the receive h/w in preparation for a reset.
+ */
+static void
+ath5k_rx_stop(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
+ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
+ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
+
+ ath5k_debug_printrxbuffs(sc, ah);
+
+ sc->rxlink = NULL; /* just in case */
+}
+
+static unsigned int
+ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
+ struct sk_buff *skb, struct ath5k_rx_status *rs)
+{
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ unsigned int keyix, hlen;
+
+ if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ rs->rs_keyix != AR5K_RXKEYIX_INVALID)
+ return RX_FLAG_DECRYPTED;
+
+ /* Apparently when a default key is used to decrypt the packet
+ the hw does not set the index used to decrypt. In such cases
+ get the index from the packet. */
+ hlen = ieee80211_hdrlen(hdr->frame_control);
+ if (ieee80211_has_protected(hdr->frame_control) &&
+ !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ skb->len >= hlen + 4) {
+ keyix = skb->data[hlen + 3] >> 6;
+
+ if (test_bit(keyix, sc->keymap))
+ return RX_FLAG_DECRYPTED;
+ }
+
+ return 0;
+}
+
+
+static void
+ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
+ struct ieee80211_rx_status *rxs)
+{
+ u64 tsf, bc_tstamp;
+ u32 hw_tu;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+
+ if (ieee80211_is_beacon(mgmt->frame_control) &&
+ le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
+ memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
+ /*
+ * Received an IBSS beacon with the same BSSID. Hardware *must*
+ * have updated the local TSF. We have to work around various
+ * hardware bugs, though...
+ */
+ tsf = ath5k_hw_get_tsf64(sc->ah);
+ bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
+ hw_tu = TSF_TO_TU(tsf);
+
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
+ (unsigned long long)bc_tstamp,
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)(rxs->mactime - bc_tstamp),
+ (unsigned long long)tsf);
+
+ /*
+ * Sometimes the HW will give us a wrong tstamp in the rx
+ * status, causing the timestamp extension to go wrong.
+ * (This seems to happen especially with beacon frames bigger
+ * than 78 byte (incl. FCS))
+ * But we know that the receive timestamp must be later than the
+ * timestamp of the beacon since HW must have synced to that.
+ *
+ * NOTE: here we assume mactime to be after the frame was
+ * received, not like mac80211 which defines it at the start.
+ */
+ if (bc_tstamp > rxs->mactime) {
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "fixing mactime from %llx to %llx\n",
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)tsf);
+ rxs->mactime = tsf;
+ }
+
+ /*
+ * Local TSF might have moved higher than our beacon timers,
+ * in that case we have to update them to continue sending
+ * beacons. This also takes care of synchronizing beacon sending
+ * times with other stations.
+ */
+ if (hw_tu >= sc->nexttbtt)
+ ath5k_beacon_update_timers(sc, bc_tstamp);
+ }
+}
+
+static void ath5k_tasklet_beacon(unsigned long data)
+{
+ struct ath5k_softc *sc = (struct ath5k_softc *) data;
+
+ /*
+ * Software beacon alert--time to send a beacon.
+ *
+ * In IBSS mode we use this interrupt just to
+ * keep track of the next TBTT (target beacon
+ * transmission time) in order to detect wether
+ * automatic TSF updates happened.
+ */
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+ /* XXX: only if VEOL suppported */
+ u64 tsf = ath5k_hw_get_tsf64(sc->ah);
+ sc->nexttbtt += sc->bintval;
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "SWBA nexttbtt: %x hw_tu: %x "
+ "TSF: %llx\n",
+ sc->nexttbtt,
+ TSF_TO_TU(tsf),
+ (unsigned long long) tsf);
+ } else {
+ spin_lock(&sc->block);
+ ath5k_beacon_send(sc);
+ spin_unlock(&sc->block);
+ }
+}
+
+static void
+ath5k_tasklet_rx(unsigned long data)
+{
+ struct ieee80211_rx_status rxs = {};
+ struct ath5k_rx_status rs = {};
+ struct sk_buff *skb, *next_skb;
+ dma_addr_t next_skb_addr;
+ struct ath5k_softc *sc = (void *)data;
+ struct ath5k_buf *bf, *bf_last;
+ struct ath5k_desc *ds;
+ int ret;
+ int hdrlen;
+ int padsize;
+
+ spin_lock(&sc->rxbuflock);
+ if (list_empty(&sc->rxbuf)) {
+ ATH5K_WARN(sc, "empty rx buf pool\n");
+ goto unlock;
+ }
+ bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
+ do {
+ rxs.flag = 0;
+
+ bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+ BUG_ON(bf->skb == NULL);
+ skb = bf->skb;
+ ds = bf->desc;
+
+ /*
+ * last buffer must not be freed to ensure proper hardware
+ * function. When the hardware finishes also a packet next to
+ * it, we are sure, it doesn't use it anymore and we can go on.
+ */
+ if (bf_last == bf)
+ bf->flags |= 1;
+ if (bf->flags) {
+ struct ath5k_buf *bf_next = list_entry(bf->list.next,
+ struct ath5k_buf, list);
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+ &rs);
+ if (ret)
+ break;
+ bf->flags &= ~1;
+ /* skip the overwritten one (even status is martian) */
+ goto next;
+ }
+
+ ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(sc, "error in processing rx descriptor\n");
+ spin_unlock(&sc->rxbuflock);
+ return;
+ }
+
+ if (unlikely(rs.rs_more)) {
+ ATH5K_WARN(sc, "unsupported jumbo\n");
+ goto next;
+ }
+
+ if (unlikely(rs.rs_status)) {
+ if (rs.rs_status & AR5K_RXERR_PHY)
+ goto next;
+ if (rs.rs_status & AR5K_RXERR_DECRYPT) {
+ /*
+ * Decrypt error. If the error occurred
+ * because there was no hardware key, then
+ * let the frame through so the upper layers
+ * can process it. This is necessary for 5210
+ * parts which have no way to setup a ``clear''
+ * key cache entry.
+ *
+ * XXX do key cache faulting
+ */
+ if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
+ !(rs.rs_status & AR5K_RXERR_CRC))
+ goto accept;
+ }
+ if (rs.rs_status & AR5K_RXERR_MIC) {
+ rxs.flag |= RX_FLAG_MMIC_ERROR;
+ goto accept;
+ }
+
+ /* let crypto-error packets fall through in MNTR */
+ if ((rs.rs_status &
+ ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
+ sc->opmode != NL80211_IFTYPE_MONITOR)
+ goto next;
+ }
+accept:
+ next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
+
+ /*
+ * If we can't replace bf->skb with a new skb under memory
+ * pressure, just skip this packet
+ */
+ if (!next_skb)
+ goto next;
+
+ pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, rs.rs_datalen);
+
+ /* The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = (4 - hdrlen % 4) % 4; However, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. In addition, we must
+ * not try to remove padding from short control frames that do
+ * not have payload. */
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ padsize = ath5k_pad_size(hdrlen);
+ if (padsize) {
+ memmove(skb->data + padsize, skb->data, hdrlen);
+ skb_pull(skb, padsize);
+ }
+
+ /*
+ * always extend the mac timestamp, since this information is
+ * also needed for proper IBSS merging.
+ *
+ * XXX: it might be too late to do it here, since rs_tstamp is
+ * 15bit only. that means TSF extension has to be done within
+ * 32768usec (about 32ms). it might be necessary to move this to
+ * the interrupt handler, like it is done in madwifi.
+ *
+ * Unfortunately we don't know when the hardware takes the rx
+ * timestamp (beginning of phy frame, data frame, end of rx?).
+ * The only thing we know is that it is hardware specific...
+ * On AR5213 it seems the rx timestamp is at the end of the
+ * frame, but i'm not sure.
+ *
+ * NOTE: mac80211 defines mactime at the beginning of the first
+ * data symbol. Since we don't have any time references it's
+ * impossible to comply to that. This affects IBSS merge only
+ * right now, so it's not too bad...
+ */
+ rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
+ rxs.flag |= RX_FLAG_TSFT;
+
+ rxs.freq = sc->curchan->center_freq;
+ rxs.band = sc->curband->band;
+
+ rxs.noise = sc->ah->ah_noise_floor;
+ rxs.signal = rxs.noise + rs.rs_rssi;
+
+ /* An rssi of 35 indicates you should be able use
+ * 54 Mbps reliably. A more elaborate scheme can be used
+ * here but it requires a map of SNR/throughput for each
+ * possible mode used */
+ rxs.qual = rs.rs_rssi * 100 / 35;
+
+ /* rssi can be more than 35 though, anything above that
+ * should be considered at 100% */
+ if (rxs.qual > 100)
+ rxs.qual = 100;
+
+ rxs.antenna = rs.rs_antenna;
+ rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
+ rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
+
+ if (rxs.rate_idx >= 0 && rs.rs_rate ==
+ sc->curband->bitrates[rxs.rate_idx].hw_value_short)
+ rxs.flag |= RX_FLAG_SHORTPRE;
+
+ ath5k_debug_dump_skb(sc, skb, "RX ", 0);
+
+ /* check beacons in IBSS mode */
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
+ ath5k_check_ibss_tsf(sc, skb, &rxs);
+
+ __ieee80211_rx(sc->hw, skb, &rxs);
+
+ bf->skb = next_skb;
+ bf->skbaddr = next_skb_addr;
+next:
+ list_move_tail(&bf->list, &sc->rxbuf);
+ } while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
+ spin_unlock(&sc->rxbuflock);
+}
+
+
+
+
+/*************\
+* TX Handling *
+\*************/
+
+static void
+ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+ struct ath5k_tx_status ts = {};
+ struct ath5k_buf *bf, *bf0;
+ struct ath5k_desc *ds;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ int i, ret;
+
+ spin_lock(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ds = bf->desc;
+
+ ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(sc, "error %d while processing queue %u\n",
+ ret, txq->qnum);
+ break;
+ }
+
+ skb = bf->skb;
+ info = IEEE80211_SKB_CB(skb);
+ bf->skb = NULL;
+
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
+ PCI_DMA_TODEVICE);
+
+ ieee80211_tx_info_clear_status(info);
+ for (i = 0; i < 4; i++) {
+ struct ieee80211_tx_rate *r =
+ &info->status.rates[i];
+
+ if (ts.ts_rate[i]) {
+ r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
+ r->count = ts.ts_retry[i];
+ } else {
+ r->idx = -1;
+ r->count = 0;
+ }
+ }
+
+ /* count the successful attempt as well */
+ info->status.rates[ts.ts_final_idx].count++;
+
+ if (unlikely(ts.ts_status)) {
+ sc->ll_stats.dot11ACKFailureCount++;
+ if (ts.ts_status & AR5K_TXERR_FILT)
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ } else {
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->status.ack_signal = ts.ts_rssi;
+ }
+
+ ieee80211_tx_status(sc->hw, skb);
+ sc->tx_stats[txq->qnum].count++;
+
+ spin_lock(&sc->txbuflock);
+ sc->tx_stats[txq->qnum].len--;
+ list_move_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ spin_unlock(&sc->txbuflock);
+ }
+ if (likely(list_empty(&txq->q)))
+ txq->link = NULL;
+ spin_unlock(&txq->lock);
+ if (sc->txbuf_len > ATH_TXBUF / 5)
+ ieee80211_wake_queues(sc->hw);
+}
+
+static void
+ath5k_tasklet_tx(unsigned long data)
+{
+ struct ath5k_softc *sc = (void *)data;
+
+ ath5k_tx_processq(sc, sc->txq);
+}
+
+
+/*****************\
+* Beacon handling *
+\*****************/
+
+/*
+ * Setup the beacon frame for transmit.
+ */
+static int
+ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ath5k_hw *ah = sc->ah;
+ struct ath5k_desc *ds;
+ int ret, antenna = 0;
+ u32 flags;
+
+ bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
+ "skbaddr %llx\n", skb, skb->data, skb->len,
+ (unsigned long long)bf->skbaddr);
+ if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
+ ATH5K_ERR(sc, "beacon DMA mapping failed\n");
+ return -EIO;
+ }
+
+ ds = bf->desc;
+
+ flags = AR5K_TXDESC_NOACK;
+ if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
+ ds->ds_link = bf->daddr; /* self-linked */
+ flags |= AR5K_TXDESC_VEOL;
+ /*
+ * Let hardware handle antenna switching if txantenna is not set
+ */
+ } else {
+ ds->ds_link = 0;
+ /*
+ * Switch antenna every 4 beacons if txantenna is not set
+ * XXX assumes two antennas
+ */
+ if (antenna == 0)
+ antenna = sc->bsent & 4 ? 2 : 1;
+ }
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ ds->ds_data = bf->skbaddr;
+ ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
+ ieee80211_get_hdrlen_from_skb(skb),
+ AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
+ ieee80211_get_tx_rate(sc->hw, info)->hw_value,
+ 1, AR5K_TXKEYIX_INVALID,
+ antenna, flags, 0, 0);
+ if (ret)
+ goto err_unmap;
+
+ return 0;
+err_unmap:
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+ return ret;
+}
+
+/*
+ * Transmit a beacon frame at SWBA. Dynamic updates to the
+ * frame contents are done as needed and the slot time is
+ * also adjusted based on current state.
+ *
+ * This is called from software irq context (beacontq or restq
+ * tasklets) or user context from ath5k_beacon_config.
+ */
+static void
+ath5k_beacon_send(struct ath5k_softc *sc)
+{
+ struct ath5k_buf *bf = sc->bbuf;
+ struct ath5k_hw *ah = sc->ah;
+
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
+
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
+ ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
+ return;
+ }
+ /*
+ * Check if the previous beacon has gone out. If
+ * not don't don't try to post another, skip this
+ * period and wait for the next. Missed beacons
+ * indicate a problem and should not occur. If we
+ * miss too many consecutive beacons reset the device.
+ */
+ if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
+ sc->bmisscount++;
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "missed %u consecutive beacons\n", sc->bmisscount);
+ if (sc->bmisscount > 3) { /* NB: 3 is a guess */
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "stuck beacon time (%u missed)\n",
+ sc->bmisscount);
+ tasklet_schedule(&sc->restq);
+ }
+ return;
+ }
+ if (unlikely(sc->bmisscount != 0)) {
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "resume beacon xmit after %u misses\n",
+ sc->bmisscount);
+ sc->bmisscount = 0;
+ }
+
+ /*
+ * Stop any current dma and put the new frame on the queue.
+ * This should never fail since we check above that no frames
+ * are still pending on the queue.
+ */
+ if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
+ ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
+ /* NB: hw still stops DMA, so proceed */
+ }
+
+ ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
+ ath5k_hw_start_tx_dma(ah, sc->bhalq);
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
+ sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
+
+ sc->bsent++;
+}
+
+
+/**
+ * ath5k_beacon_update_timers - update beacon timers
+ *
+ * @sc: struct ath5k_softc pointer we are operating on
+ * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
+ * beacon timer update based on the current HW TSF.
+ *
+ * Calculate the next target beacon transmit time (TBTT) based on the timestamp
+ * of a received beacon or the current local hardware TSF and write it to the
+ * beacon timer registers.
+ *
+ * This is called in a variety of situations, e.g. when a beacon is received,
+ * when a TSF update has been detected, but also when an new IBSS is created or
+ * when we otherwise know we have to update the timers, but we keep it in this
+ * function to have it all together in one place.
+ */
+static void
+ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ u32 nexttbtt, intval, hw_tu, bc_tu;
+ u64 hw_tsf;
+
+ intval = sc->bintval & AR5K_BEACON_PERIOD;
+ if (WARN_ON(!intval))
+ return;
+
+ /* beacon TSF converted to TU */
+ bc_tu = TSF_TO_TU(bc_tsf);
+
+ /* current TSF converted to TU */
+ hw_tsf = ath5k_hw_get_tsf64(ah);
+ hw_tu = TSF_TO_TU(hw_tsf);
+
+#define FUDGE 3
+ /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
+ if (bc_tsf == -1) {
+ /*
+ * no beacons received, called internally.
+ * just need to refresh timers based on HW TSF.
+ */
+ nexttbtt = roundup(hw_tu + FUDGE, intval);
+ } else if (bc_tsf == 0) {
+ /*
+ * no beacon received, probably called by ath5k_reset_tsf().
+ * reset TSF to start with 0.
+ */
+ nexttbtt = intval;
+ intval |= AR5K_BEACON_RESET_TSF;
+ } else if (bc_tsf > hw_tsf) {
+ /*
+ * beacon received, SW merge happend but HW TSF not yet updated.
+ * not possible to reconfigure timers yet, but next time we
+ * receive a beacon with the same BSSID, the hardware will
+ * automatically update the TSF and then we need to reconfigure
+ * the timers.
+ */
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "need to wait for HW TSF sync\n");
+ return;
+ } else {
+ /*
+ * most important case for beacon synchronization between STA.
+ *
+ * beacon received and HW TSF has been already updated by HW.
+ * update next TBTT based on the TSF of the beacon, but make
+ * sure it is ahead of our local TSF timer.
+ */
+ nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
+ }
+#undef FUDGE
+
+ sc->nexttbtt = nexttbtt;
+
+ intval |= AR5K_BEACON_ENA;
+ ath5k_hw_init_beacon(ah, nexttbtt, intval);
+
+ /*
+ * debugging output last in order to preserve the time critical aspect
+ * of this function
+ */
+ if (bc_tsf == -1)
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "reconfigured timers based on HW TSF\n");
+ else if (bc_tsf == 0)
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "reset HW TSF and timers\n");
+ else
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "updated timers based on beacon TSF\n");
+
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
+ "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
+ (unsigned long long) bc_tsf,
+ (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
+ ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
+ intval & AR5K_BEACON_PERIOD,
+ intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
+ intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
+}
+
+
+/**
+ * ath5k_beacon_config - Configure the beacon queues and interrupts
+ *
+ * @sc: struct ath5k_softc pointer we are operating on
+ *
+ * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
+ * interrupts to detect TSF updates only.
+ */
+static void
+ath5k_beacon_config(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ unsigned long flags;
+
+ ath5k_hw_set_imr(ah, 0);
+ sc->bmisscount = 0;
+ sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
+
+ if (sc->opmode == NL80211_IFTYPE_ADHOC ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT ||
+ sc->opmode == NL80211_IFTYPE_AP) {
+ /*
+ * In IBSS mode we use a self-linked tx descriptor and let the
+ * hardware send the beacons automatically. We have to load it
+ * only once here.
+ * We use the SWBA interrupt only to keep track of the beacon
+ * timers in order to detect automatic TSF updates.
+ */
+ ath5k_beaconq_config(sc);
+
+ sc->imask |= AR5K_INT_SWBA;
+
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+ if (ath5k_hw_hasveol(ah)) {
+ spin_lock_irqsave(&sc->block, flags);
+ ath5k_beacon_send(sc);
+ spin_unlock_irqrestore(&sc->block, flags);
+ }
+ } else
+ ath5k_beacon_update_timers(sc, -1);
+ }
+
+ ath5k_hw_set_imr(ah, sc->imask);
+}
+
+
+/********************\
+* Interrupt handling *
+\********************/
+
+static int
+ath5k_init(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+ int ret, i;
+
+ mutex_lock(&sc->lock);
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
+
+ /*
+ * Stop anything previously setup. This is safe
+ * no matter this is the first time through or not.
+ */
+ ath5k_stop_locked(sc);
+
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ sc->curchan = sc->hw->conf.channel;
+ sc->curband = &sc->sbands[sc->curchan->band];
+ sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
+ AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL;
+ ret = ath5k_reset(sc, false, false);
+ if (ret)
+ goto done;
+
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
+ ath5k_hw_reset_key(ah, i);
+
+ /* Set ack to be sent at low bit-rates */
+ ath5k_hw_set_ack_bitrate_high(ah, false);
+
+ mod_timer(&sc->calib_tim, round_jiffies(jiffies +
+ msecs_to_jiffies(ath5k_calinterval * 1000)));
+
+ ret = 0;
+done:
+ mmiowb();
+ mutex_unlock(&sc->lock);
+ return ret;
+}
+
+static int
+ath5k_stop_locked(struct ath5k_softc *sc)
+{
+ struct ath5k_hw *ah = sc->ah;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
+ test_bit(ATH_STAT_INVALID, sc->status));
+
+ /*
+ * Shutdown the hardware and driver:
+ * stop output from above
+ * disable interrupts
+ * turn off timers
+ * turn off the radio
+ * clear transmit machinery
+ * clear receive machinery
+ * drain and release tx queues
+ * reclaim beacon resources
+ * power down hardware
+ *
+ * Note that some of this work is not possible if the
+ * hardware is gone (invalid).
+ */
+ ieee80211_stop_queues(sc->hw);
+
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+ ath5k_led_off(sc);
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(sc->pdev->irq);
+ }
+ ath5k_txq_cleanup(sc);
+ if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+ ath5k_rx_stop(sc);
+ ath5k_hw_phy_disable(ah);
+ } else
+ sc->rxlink = NULL;
+
+ return 0;
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath5k_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+static int
+ath5k_stop_hw(struct ath5k_softc *sc)
+{
+ int ret;
+
+ mutex_lock(&sc->lock);
+ ret = ath5k_stop_locked(sc);
+ if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
+ /*
+ * Set the chip in full sleep mode. Note that we are
+ * careful to do this only when bringing the interface
+ * completely to a stop. When the chip is in this state
+ * it must be carefully woken up or references to
+ * registers in the PCI clock domain may freeze the bus
+ * (and system). This varies by chip and is mostly an
+ * issue with newer parts that go to sleep more quickly.
+ */
+ if (sc->ah->ah_mac_srev >= 0x78) {
+ /*
+ * XXX
+ * don't put newer MAC revisions > 7.8 to sleep because
+ * of the above mentioned problems
+ */
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
+ "not putting device to sleep\n");
+ } else {
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+ "putting device to full sleep\n");
+ ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
+ }
+ }
+ ath5k_txbuf_free(sc, sc->bbuf);
+
+ mmiowb();
+ mutex_unlock(&sc->lock);
+
+ del_timer_sync(&sc->calib_tim);
+ tasklet_kill(&sc->rxtq);
+ tasklet_kill(&sc->txtq);
+ tasklet_kill(&sc->restq);
+ tasklet_kill(&sc->beacontq);
+
+ return ret;
+}
+
+static irqreturn_t
+ath5k_intr(int irq, void *dev_id)
+{
+ struct ath5k_softc *sc = dev_id;
+ struct ath5k_hw *ah = sc->ah;
+ enum ath5k_int status;
+ unsigned int counter = 1000;
+
+ if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
+ !ath5k_hw_is_intr_pending(ah)))
+ return IRQ_NONE;
+
+ do {
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+ ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
+ status, sc->imask);
+ if (unlikely(status & AR5K_INT_FATAL)) {
+ /*
+ * Fatal errors are unrecoverable.
+ * Typically these are caused by DMA errors.
+ */
+ tasklet_schedule(&sc->restq);
+ } else if (unlikely(status & AR5K_INT_RXORN)) {
+ tasklet_schedule(&sc->restq);
+ } else {
+ if (status & AR5K_INT_SWBA) {
+ tasklet_schedule(&sc->beacontq);
+ }
+ if (status & AR5K_INT_RXEOL) {
+ /*
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ sc->rxlink = NULL;
+ }
+ if (status & AR5K_INT_TXURN) {
+ /* bump tx trigger level */
+ ath5k_hw_update_tx_triglevel(ah, true);
+ }
+ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
+ tasklet_schedule(&sc->rxtq);
+ if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR | AR5K_INT_TXEOL))
+ tasklet_schedule(&sc->txtq);
+ if (status & AR5K_INT_BMISS) {
+ /* TODO */
+ }
+ if (status & AR5K_INT_MIB) {
+ /*
+ * These stats are also used for ANI i think
+ * so how about updating them more often ?
+ */
+ ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
+ }
+ }
+ } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+
+ if (unlikely(!counter))
+ ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
+
+ return IRQ_HANDLED;
+}
+
+static void
+ath5k_tasklet_reset(unsigned long data)
+{
+ struct ath5k_softc *sc = (void *)data;
+
+ ath5k_reset_wake(sc);
+}
+
+/*
+ * Periodically recalibrate the PHY to account
+ * for temperature/environment changes.
+ */
+static void
+ath5k_calibrate(unsigned long data)
+{
+ struct ath5k_softc *sc = (void *)data;
+ struct ath5k_hw *ah = sc->ah;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
+ ieee80211_frequency_to_channel(sc->curchan->center_freq),
+ sc->curchan->hw_value);
+
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+ /*
+ * Rfgain is out of bounds, reset the chip
+ * to load new gain values.
+ */
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
+ ath5k_reset_wake(sc);
+ }
+ if (ath5k_hw_phy_calibrate(ah, sc->curchan))
+ ATH5K_ERR(sc, "calibration of channel %u failed\n",
+ ieee80211_frequency_to_channel(
+ sc->curchan->center_freq));
+
+ mod_timer(&sc->calib_tim, round_jiffies(jiffies +
+ msecs_to_jiffies(ath5k_calinterval * 1000)));
+}
+
+
+/********************\
+* Mac80211 functions *
+\********************/
+
+static int
+ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_buf *bf;
+ unsigned long flags;
+ int hdrlen;
+ int padsize;
+
+ ath5k_debug_dump_skb(sc, skb, "TX ", 1);
+
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
+ ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
+
+ /*
+ * the hardware expects the header padded to 4 byte boundaries
+ * if this is not the case we add the padding after the header
+ */
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ padsize = ath5k_pad_size(hdrlen);
+ if (padsize) {
+
+ if (skb_headroom(skb) < padsize) {
+ ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
+ " headroom to pad %d\n", hdrlen, padsize);
+ goto drop_packet;
+ }
+ skb_push(skb, padsize);
+ memmove(skb->data, skb->data+padsize, hdrlen);
+ }
+
+ spin_lock_irqsave(&sc->txbuflock, flags);
+ if (list_empty(&sc->txbuf)) {
+ ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+ ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
+ goto drop_packet;
+ }
+ bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
+ list_del(&bf->list);
+ sc->txbuf_len--;
+ if (list_empty(&sc->txbuf))
+ ieee80211_stop_queues(hw);
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+
+ bf->skb = skb;
+
+ if (ath5k_txbuf_setup(sc, bf)) {
+ bf->skb = NULL;
+ spin_lock_irqsave(&sc->txbuflock, flags);
+ list_add_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ spin_unlock_irqrestore(&sc->txbuflock, flags);
+ goto drop_packet;
+ }
+ return NETDEV_TX_OK;
+
+drop_packet:
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+static int
+ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+{
+ struct ath5k_hw *ah = sc->ah;
+ int ret;
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
+
+ if (stop) {
+ ath5k_hw_set_imr(ah, 0);
+ ath5k_txq_cleanup(sc);
+ ath5k_rx_stop(sc);
+ }
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
+ if (ret) {
+ ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
+ goto err;
+ }
+
+ ret = ath5k_rx_start(sc);
+ if (ret) {
+ ATH5K_ERR(sc, "can't start recv logic\n");
+ goto err;
+ }
+
+ /*
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
+ *
+ * XXX needed?
+ */
+/* ath5k_chan_change(sc, c); */
+
+ ath5k_beacon_config(sc);
+ /* intrs are enabled by ath5k_beacon_config */
+
+ return 0;
+err:
+ return ret;
+}
+
+static int
+ath5k_reset_wake(struct ath5k_softc *sc)
+{
+ int ret;
+
+ ret = ath5k_reset(sc, true, true);
+ if (!ret)
+ ieee80211_wake_queues(sc->hw);
+
+ return ret;
+}
+
+static int ath5k_start(struct ieee80211_hw *hw)
+{
+ return ath5k_init(hw->priv);
+}
+
+static void ath5k_stop(struct ieee80211_hw *hw)
+{
+ ath5k_stop_hw(hw->priv);
+}
+
+static int ath5k_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct ath5k_softc *sc = hw->priv;
+ int ret;
+
+ mutex_lock(&sc->lock);
+ if (sc->vif) {
+ ret = 0;
+ goto end;
+ }
+
+ sc->vif = conf->vif;
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_MONITOR:
+ sc->opmode = conf->type;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto end;
+ }
+
+ /* Set to a reasonable value. Note that this will
+ * be set to mac80211's value at ath5k_config(). */
+ sc->bintval = 1000;
+ ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
+
+ ret = 0;
+end:
+ mutex_unlock(&sc->lock);
+ return ret;
+}
+
+static void
+ath5k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct ath5k_softc *sc = hw->priv;
+ u8 mac[ETH_ALEN] = {};
+
+ mutex_lock(&sc->lock);
+ if (sc->vif != conf->vif)
+ goto end;
+
+ ath5k_hw_set_lladdr(sc->ah, mac);
+ sc->vif = NULL;
+end:
+ mutex_unlock(&sc->lock);
+}
+
+/*
+ * TODO: Phy disable/diversity etc
+ */
+static int
+ath5k_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int ret;
+
+ mutex_lock(&sc->lock);
+
+ sc->bintval = conf->beacon_int;
+ sc->power_level = conf->power_level;
+
+ ret = ath5k_chan_set(sc, conf->channel);
+
+ mutex_unlock(&sc->lock);
+ return ret;
+}
+
+static int
+ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ int ret = 0;
+
+ mutex_lock(&sc->lock);
+ if (sc->vif != vif) {
+ ret = -EIO;
+ goto unlock;
+ }
+ if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
+ /* Cache for later use during resets */
+ memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
+ /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+ * a clean way of letting us retrieve this yet. */
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ mmiowb();
+ }
+ if (conf->changed & IEEE80211_IFCC_BEACON &&
+ (vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT ||
+ vif->type == NL80211_IFTYPE_AP)) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+ if (!beacon) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+ ath5k_beacon_update(sc, beacon);
+ }
+
+unlock:
+ mutex_unlock(&sc->lock);
+ return ret;
+}
+
+#define SUPPORTED_FIF_FLAGS \
+ FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
+ FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
+ FIF_BCN_PRBRESP_PROMISC
+/*
+ * o always accept unicast, broadcast, and multicast traffic
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
+ * says it should be
+ * o maintain current state of phy ofdm or phy cck error reception.
+ * If the hardware detects any of these type of errors then
+ * ath5k_hw_get_rx_filter() will pass to us the respective
+ * hardware filters to be able to receive these type of frames.
+ * o probe request frames are accepted only when operating in
+ * hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ * - when operating in adhoc mode so the 802.11 layer creates
+ * node table entries for peers,
+ * - when operating in station mode for collecting rssi data when
+ * the station is otherwise quiet, or
+ * - when scanning
+ */
+static void ath5k_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *new_flags,
+ int mc_count, struct dev_mc_list *mclist)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ u32 mfilt[2], val, rfilt;
+ u8 pos;
+ int i;
+
+ mfilt[0] = 0;
+ mfilt[1] = 0;
+
+ /* Only deal with supported flags */
+ changed_flags &= SUPPORTED_FIF_FLAGS;
+ *new_flags &= SUPPORTED_FIF_FLAGS;
+
+ /* If HW detects any phy or radar errors, leave those filters on.
+ * Also, always enable Unicast, Broadcasts and Multicast
+ * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
+ rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
+ (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
+ AR5K_RX_FILTER_MCAST);
+
+ if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+ if (*new_flags & FIF_PROMISC_IN_BSS) {
+ rfilt |= AR5K_RX_FILTER_PROM;
+ __set_bit(ATH_STAT_PROMISC, sc->status);
+ } else {
+ __clear_bit(ATH_STAT_PROMISC, sc->status);
+ }
+ }
+
+ /* Note, AR5K_RX_FILTER_MCAST is already enabled */
+ if (*new_flags & FIF_ALLMULTI) {
+ mfilt[0] = ~0;
+ mfilt[1] = ~0;
+ } else {
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ /* calculate XOR of eight 6-bit values */
+ val = get_unaligned_le32(mclist->dmi_addr + 0);
+ pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ val = get_unaligned_le32(mclist->dmi_addr + 3);
+ pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ pos &= 0x3f;
+ mfilt[pos / 32] |= (1 << (pos % 32));
+ /* XXX: we might be able to just do this instead,
+ * but not sure, needs testing, if we do use this we'd
+ * neet to inform below to not reset the mcast */
+ /* ath5k_hw_set_mcast_filterindex(ah,
+ * mclist->dmi_addr[5]); */
+ mclist = mclist->next;
+ }
+ }
+
+ /* This is the best we can do */
+ if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
+ rfilt |= AR5K_RX_FILTER_PHYERR;
+
+ /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
+ * and probes for any BSSID, this needs testing */
+ if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
+ rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
+
+ /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
+ * set we should only pass on control frames for this
+ * station. This needs testing. I believe right now this
+ * enables *all* control frames, which is OK.. but
+ * but we should see if we can improve on granularity */
+ if (*new_flags & FIF_CONTROL)
+ rfilt |= AR5K_RX_FILTER_CONTROL;
+
+ /* Additional settings per mode -- this is per ath5k */
+
+ /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
+
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
+ rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
+ AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
+ if (sc->opmode != NL80211_IFTYPE_STATION)
+ rfilt |= AR5K_RX_FILTER_PROBEREQ;
+ if (sc->opmode != NL80211_IFTYPE_AP &&
+ sc->opmode != NL80211_IFTYPE_MESH_POINT &&
+ test_bit(ATH_STAT_PROMISC, sc->status))
+ rfilt |= AR5K_RX_FILTER_PROM;
+ if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
+ sc->opmode == NL80211_IFTYPE_ADHOC ||
+ sc->opmode == NL80211_IFTYPE_AP)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ if (sc->opmode == NL80211_IFTYPE_MESH_POINT)
+ rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
+ AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
+
+ /* Set filters */
+ ath5k_hw_set_rx_filter(ah, rfilt);
+
+ /* Set multicast bits */
+ ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
+ /* Set the cached hw filter flags, this will alter actually
+ * be set in HW */
+ sc->filter_flags = rfilt;
+}
+
+static int
+ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct ath5k_softc *sc = hw->priv;
+ int ret = 0;
+
+ if (modparam_nohwcrypt)
+ return -EOPNOTSUPP;
+
+ switch (key->alg) {
+ case ALG_WEP:
+ case ALG_TKIP:
+ break;
+ case ALG_CCMP:
+ return -EOPNOTSUPP;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ mutex_lock(&sc->lock);
+
+ switch (cmd) {
+ case SET_KEY:
+ ret = ath5k_hw_set_key(sc->ah, key->keyidx, key,
+ sta ? sta->addr : NULL);
+ if (ret) {
+ ATH5K_ERR(sc, "can't set the key\n");
+ goto unlock;
+ }
+ __set_bit(key->keyidx, sc->keymap);
+ key->hw_key_idx = key->keyidx;
+ key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
+ IEEE80211_KEY_FLAG_GENERATE_MMIC);
+ break;
+ case DISABLE_KEY:
+ ath5k_hw_reset_key(sc->ah, key->keyidx);
+ __clear_bit(key->keyidx, sc->keymap);
+ break;
+ default:
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+unlock:
+ mmiowb();
+ mutex_unlock(&sc->lock);
+ return ret;
+}
+
+static int
+ath5k_get_stats(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+
+ /* Force update */
+ ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
+
+ memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
+
+ return 0;
+}
+
+static int
+ath5k_get_tx_stats(struct ieee80211_hw *hw,
+ struct ieee80211_tx_queue_stats *stats)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
+
+ return 0;
+}
+
+static u64
+ath5k_get_tsf(struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ return ath5k_hw_get_tsf64(sc->ah);
+}
+
+static void
+ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ ath5k_hw_set_tsf64(sc->ah, tsf);
+}
+
+static void
+ath5k_reset_tsf(struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+
+ /*
+ * in IBSS mode we need to update the beacon timers too.
+ * this will also reset the TSF if we call it with 0
+ */
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
+ ath5k_beacon_update_timers(sc, 0);
+ else
+ ath5k_hw_reset_tsf(sc->ah);
+}
+
+static int
+ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
+{
+ unsigned long flags;
+ int ret;
+
+ ath5k_debug_dump_skb(sc, skb, "BC ", 1);
+
+ spin_lock_irqsave(&sc->block, flags);
+ ath5k_txbuf_free(sc, sc->bbuf);
+ sc->bbuf->skb = skb;
+ ret = ath5k_beacon_setup(sc, sc->bbuf);
+ if (ret)
+ sc->bbuf->skb = NULL;
+ spin_unlock_irqrestore(&sc->block, flags);
+ if (!ret) {
+ ath5k_beacon_config(sc);
+ mmiowb();
+ }
+
+ return ret;
+}
+static void
+set_beacon_filter(struct ieee80211_hw *hw, bool enable)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ u32 rfilt;
+ rfilt = ath5k_hw_get_rx_filter(ah);
+ if (enable)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ else
+ rfilt &= ~AR5K_RX_FILTER_BEACON;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ sc->filter_flags = rfilt;
+}
+
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct ath5k_softc *sc = hw->priv;
+ if (changes & BSS_CHANGED_ASSOC) {
+ mutex_lock(&sc->lock);
+ sc->assoc = bss_conf->assoc;
+ if (sc->opmode == NL80211_IFTYPE_STATION)
+ set_beacon_filter(hw, sc->assoc);
+ mutex_unlock(&sc->lock);
+ }
+}
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
new file mode 100644
index 000000000000..822956114cd7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -0,0 +1,190 @@
+/*-
+ * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+/*
+ * Defintions for the Atheros Wireless LAN controller driver.
+ */
+#ifndef _DEV_ATH_ATHVAR_H
+#define _DEV_ATH_ATHVAR_H
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/wireless.h>
+#include <linux/if_ether.h>
+#include <linux/leds.h>
+
+#include "ath5k.h"
+#include "debug.h"
+
+#define ATH_RXBUF 40 /* number of RX buffers */
+#define ATH_TXBUF 200 /* number of TX buffers */
+#define ATH_BCBUF 1 /* number of beacon buffers */
+
+struct ath5k_buf {
+ struct list_head list;
+ unsigned int flags; /* rx descriptor flags */
+ struct ath5k_desc *desc; /* virtual addr of desc */
+ dma_addr_t daddr; /* physical addr of desc */
+ struct sk_buff *skb; /* skbuff for buf */
+ dma_addr_t skbaddr;/* physical addr of skb data */
+};
+
+/*
+ * Data transmit queue state. One of these exists for each
+ * hardware transmit queue. Packets sent to us from above
+ * are assigned to queues based on their priority. Not all
+ * devices support a complete set of hardware transmit queues.
+ * For those devices the array sc_ac2q will map multiple
+ * priorities to fewer hardware queues (typically all to one
+ * hardware queue).
+ */
+struct ath5k_txq {
+ unsigned int qnum; /* hardware q number */
+ u32 *link; /* link ptr in last TX desc */
+ struct list_head q; /* transmit queue */
+ spinlock_t lock; /* lock on q and link */
+ bool setup;
+};
+
+#define ATH5K_LED_MAX_NAME_LEN 31
+
+/*
+ * State for LED triggers
+ */
+struct ath5k_led
+{
+ char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */
+ struct ath5k_softc *sc; /* driver state */
+ struct led_classdev led_dev; /* led classdev */
+};
+
+
+#if CHAN_DEBUG
+#define ATH_CHAN_MAX (26+26+26+200+200)
+#else
+#define ATH_CHAN_MAX (14+14+14+252+20)
+#endif
+
+/* Software Carrier, keeps track of the driver state
+ * associated with an instance of a device */
+struct ath5k_softc {
+ struct pci_dev *pdev; /* for dma mapping */
+ void __iomem *iobase; /* address of the device */
+ struct mutex lock; /* dev-level lock */
+ /* FIXME: how many does it really need? */
+ struct ieee80211_tx_queue_stats tx_stats[16];
+ struct ieee80211_low_level_stats ll_stats;
+ struct ieee80211_hw *hw; /* IEEE 802.11 common */
+ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+ struct ieee80211_channel channels[ATH_CHAN_MAX];
+ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+ s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+ enum nl80211_iftype opmode;
+ struct ath5k_hw *ah; /* Atheros HW */
+
+ struct ieee80211_supported_band *curband;
+
+#ifdef CONFIG_ATH5K_DEBUG
+ struct ath5k_dbg_info debug; /* debug info */
+#endif /* CONFIG_ATH5K_DEBUG */
+
+ struct ath5k_buf *bufptr; /* allocated buffer ptr */
+ struct ath5k_desc *desc; /* TX/RX descriptors */
+ dma_addr_t desc_daddr; /* DMA (physical) address */
+ size_t desc_len; /* size of TX/RX descriptors */
+ u16 cachelsz; /* cache line size */
+
+ DECLARE_BITMAP(status, 5);
+#define ATH_STAT_INVALID 0 /* disable hardware accesses */
+#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */
+#define ATH_STAT_PROMISC 2
+#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */
+#define ATH_STAT_STARTED 4 /* opened & irqs enabled */
+
+ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */
+ unsigned int curmode; /* current phy mode */
+ struct ieee80211_channel *curchan; /* current h/w channel */
+
+ struct ieee80211_vif *vif;
+
+ enum ath5k_int imask; /* interrupt mask copy */
+
+ DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */
+
+ u8 bssidmask[ETH_ALEN];
+
+ unsigned int led_pin, /* GPIO pin for driving LED */
+ led_on; /* pin setting for LED on */
+
+ struct tasklet_struct restq; /* reset tasklet */
+
+ unsigned int rxbufsize; /* rx size based on mtu */
+ struct list_head rxbuf; /* receive buffer */
+ spinlock_t rxbuflock;
+ u32 *rxlink; /* link ptr in last RX desc */
+ struct tasklet_struct rxtq; /* rx intr tasklet */
+ struct ath5k_led rx_led; /* rx led */
+
+ struct list_head txbuf; /* transmit buffer */
+ spinlock_t txbuflock;
+ unsigned int txbuf_len; /* buf count in txbuf list */
+ struct ath5k_txq txqs[2]; /* beacon and tx */
+
+ struct ath5k_txq *txq; /* beacon and tx*/
+ struct tasklet_struct txtq; /* tx intr tasklet */
+ struct ath5k_led tx_led; /* tx led */
+
+ spinlock_t block; /* protects beacon */
+ struct tasklet_struct beacontq; /* beacon intr tasklet */
+ struct ath5k_buf *bbuf; /* beacon buffer */
+ unsigned int bhalq, /* SW q for outgoing beacons */
+ bmisscount, /* missed beacon transmits */
+ bintval, /* beacon interval in TU */
+ bsent;
+ unsigned int nexttbtt; /* next beacon time in TU */
+
+ struct timer_list calib_tim; /* calibration timer */
+ int power_level; /* Requested tx power in dbm */
+ bool assoc; /* assocate state */
+};
+
+#define ath5k_hw_hasbssidmask(_ah) \
+ (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0)
+#define ath5k_hw_hasveol(_ah) \
+ (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
+
+#endif
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
new file mode 100644
index 000000000000..367a6c7d3cc7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**************\
+* Capabilities *
+\**************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Fill the capabilities struct
+ * TODO: Merge this with EEPROM code when we are done with it
+ */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
+{
+ u16 ee_header;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Capabilities stored in the EEPROM */
+ ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Set radio capabilities
+ * (The AR5110 only supports the middle 5GHz band)
+ */
+ ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
+ ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
+ ah->ah_capabilities.cap_range.range_2ghz_min = 0;
+ ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
+ __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
+ } else {
+ /*
+ * XXX The tranceiver supports frequencies from 4920 to 6100GHz
+ * XXX and from 2312 to 2732GHz. There are problems with the
+ * XXX current ieee80211 implementation because the IEEE
+ * XXX channel mapping does not support negative channel
+ * XXX numbers (2312MHz is channel -19). Of course, this
+ * XXX doesn't matter because these channels are out of range
+ * XXX but some regulation domains like MKK (Japan) will
+ * XXX support frequencies somewhere around 4.8GHz.
+ */
+
+ /*
+ * Set radio capabilities
+ */
+
+ if (AR5K_EEPROM_HDR_11A(ee_header)) {
+ /* 4920 */
+ ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
+ ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+
+ /* Set supported modes */
+ __set_bit(AR5K_MODE_11A,
+ ah->ah_capabilities.cap_mode);
+ __set_bit(AR5K_MODE_11A_TURBO,
+ ah->ah_capabilities.cap_mode);
+ if (ah->ah_version == AR5K_AR5212)
+ __set_bit(AR5K_MODE_11G_TURBO,
+ ah->ah_capabilities.cap_mode);
+ }
+
+ /* Enable 802.11b if a 2GHz capable radio (2111/5112) is
+ * connected */
+ if (AR5K_EEPROM_HDR_11B(ee_header) ||
+ (AR5K_EEPROM_HDR_11G(ee_header) &&
+ ah->ah_version != AR5K_AR5211)) {
+ /* 2312 */
+ ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
+ ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+
+ if (AR5K_EEPROM_HDR_11B(ee_header))
+ __set_bit(AR5K_MODE_11B,
+ ah->ah_capabilities.cap_mode);
+
+ if (AR5K_EEPROM_HDR_11G(ee_header) &&
+ ah->ah_version != AR5K_AR5211)
+ __set_bit(AR5K_MODE_11G,
+ ah->ah_capabilities.cap_mode);
+ }
+ }
+
+ /* GPIO */
+ ah->ah_gpio_npins = AR5K_NUM_GPIO;
+
+ /* Set number of supported TX queues */
+ if (ah->ah_version == AR5K_AR5210)
+ ah->ah_capabilities.cap_queues.q_tx_num =
+ AR5K_NUM_TX_QUEUES_NOQCU;
+ else
+ ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+ return 0;
+}
+
+/* Main function used by the driver part to check caps */
+int ath5k_hw_get_capability(struct ath5k_hw *ah,
+ enum ath5k_capability_type cap_type,
+ u32 capability, u32 *result)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (cap_type) {
+ case AR5K_CAP_NUM_TXQUEUES:
+ if (result) {
+ if (ah->ah_version == AR5K_AR5210)
+ *result = AR5K_NUM_TX_QUEUES_NOQCU;
+ else
+ *result = AR5K_NUM_TX_QUEUES;
+ goto yes;
+ }
+ case AR5K_CAP_VEOL:
+ goto yes;
+ case AR5K_CAP_COMPRESSION:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ case AR5K_CAP_BURST:
+ goto yes;
+ case AR5K_CAP_TPC:
+ goto yes;
+ case AR5K_CAP_BSSIDMASK:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ case AR5K_CAP_XR:
+ if (ah->ah_version == AR5K_AR5212)
+ goto yes;
+ else
+ goto no;
+ default:
+ goto no;
+ }
+
+no:
+ return -EINVAL;
+yes:
+ return 0;
+}
+
+/*
+ * TODO: Following functions should be part of a new function
+ * set_capability
+ */
+
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+ u16 assoc_id)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
+
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+ return 0;
+ }
+
+ return -EIO;
+}
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
new file mode 100644
index 000000000000..9770bb3d40f9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -0,0 +1,538 @@
+/*
+ * Copyright (c) 2007-2008 Bruno Randolf <bruno@thinktube.com>
+ *
+ * This file is free software: you may copy, redistribute and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include "base.h"
+#include "debug.h"
+
+static unsigned int ath5k_debug;
+module_param_named(debug, ath5k_debug, uint, 0);
+
+
+#ifdef CONFIG_ATH5K_DEBUG
+
+#include <linux/seq_file.h>
+#include "reg.h"
+
+static struct dentry *ath5k_global_debugfs;
+
+static int ath5k_debugfs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+
+/* debugfs: registers */
+
+struct reg {
+ const char *name;
+ int addr;
+};
+
+#define REG_STRUCT_INIT(r) { #r, r }
+
+/* just a few random registers, might want to add more */
+static const struct reg regs[] = {
+ REG_STRUCT_INIT(AR5K_CR),
+ REG_STRUCT_INIT(AR5K_RXDP),
+ REG_STRUCT_INIT(AR5K_CFG),
+ REG_STRUCT_INIT(AR5K_IER),
+ REG_STRUCT_INIT(AR5K_BCR),
+ REG_STRUCT_INIT(AR5K_RTSD0),
+ REG_STRUCT_INIT(AR5K_RTSD1),
+ REG_STRUCT_INIT(AR5K_TXCFG),
+ REG_STRUCT_INIT(AR5K_RXCFG),
+ REG_STRUCT_INIT(AR5K_RXJLA),
+ REG_STRUCT_INIT(AR5K_MIBC),
+ REG_STRUCT_INIT(AR5K_TOPS),
+ REG_STRUCT_INIT(AR5K_RXNOFRM),
+ REG_STRUCT_INIT(AR5K_TXNOFRM),
+ REG_STRUCT_INIT(AR5K_RPGTO),
+ REG_STRUCT_INIT(AR5K_RFCNT),
+ REG_STRUCT_INIT(AR5K_MISC),
+ REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT),
+ REG_STRUCT_INIT(AR5K_ISR),
+ REG_STRUCT_INIT(AR5K_PISR),
+ REG_STRUCT_INIT(AR5K_SISR0),
+ REG_STRUCT_INIT(AR5K_SISR1),
+ REG_STRUCT_INIT(AR5K_SISR2),
+ REG_STRUCT_INIT(AR5K_SISR3),
+ REG_STRUCT_INIT(AR5K_SISR4),
+ REG_STRUCT_INIT(AR5K_IMR),
+ REG_STRUCT_INIT(AR5K_PIMR),
+ REG_STRUCT_INIT(AR5K_SIMR0),
+ REG_STRUCT_INIT(AR5K_SIMR1),
+ REG_STRUCT_INIT(AR5K_SIMR2),
+ REG_STRUCT_INIT(AR5K_SIMR3),
+ REG_STRUCT_INIT(AR5K_SIMR4),
+ REG_STRUCT_INIT(AR5K_DCM_ADDR),
+ REG_STRUCT_INIT(AR5K_DCCFG),
+ REG_STRUCT_INIT(AR5K_CCFG),
+ REG_STRUCT_INIT(AR5K_CPC0),
+ REG_STRUCT_INIT(AR5K_CPC1),
+ REG_STRUCT_INIT(AR5K_CPC2),
+ REG_STRUCT_INIT(AR5K_CPC3),
+ REG_STRUCT_INIT(AR5K_CPCOVF),
+ REG_STRUCT_INIT(AR5K_RESET_CTL),
+ REG_STRUCT_INIT(AR5K_SLEEP_CTL),
+ REG_STRUCT_INIT(AR5K_INTPEND),
+ REG_STRUCT_INIT(AR5K_SFR),
+ REG_STRUCT_INIT(AR5K_PCICFG),
+ REG_STRUCT_INIT(AR5K_GPIOCR),
+ REG_STRUCT_INIT(AR5K_GPIODO),
+ REG_STRUCT_INIT(AR5K_SREV),
+};
+
+static void *reg_start(struct seq_file *seq, loff_t *pos)
+{
+ return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
+}
+
+static void reg_stop(struct seq_file *seq, void *p)
+{
+ /* nothing to do */
+}
+
+static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
+{
+ ++*pos;
+ return *pos < ARRAY_SIZE(regs) ? (void *)&regs[*pos] : NULL;
+}
+
+static int reg_show(struct seq_file *seq, void *p)
+{
+ struct ath5k_softc *sc = seq->private;
+ struct reg *r = p;
+ seq_printf(seq, "%-25s0x%08x\n", r->name,
+ ath5k_hw_reg_read(sc->ah, r->addr));
+ return 0;
+}
+
+static const struct seq_operations register_seq_ops = {
+ .start = reg_start,
+ .next = reg_next,
+ .stop = reg_stop,
+ .show = reg_show
+};
+
+static int open_file_registers(struct inode *inode, struct file *file)
+{
+ struct seq_file *s;
+ int res;
+ res = seq_open(file, &register_seq_ops);
+ if (res == 0) {
+ s = file->private_data;
+ s->private = inode->i_private;
+ }
+ return res;
+}
+
+static const struct file_operations fops_registers = {
+ .open = open_file_registers,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .owner = THIS_MODULE,
+};
+
+
+/* debugfs: beacons */
+
+static ssize_t read_file_beacon(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ struct ath5k_hw *ah = sc->ah;
+ char buf[500];
+ unsigned int len = 0;
+ unsigned int v;
+ u64 tsf;
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n",
+ "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD,
+ (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S);
+
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n",
+ "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP));
+
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n",
+ "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT));
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0);
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER0 (TBTT)", v, v);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1);
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER1 (DMA)", v, v >> 3);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2);
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER2 (SWBA)", v, v >> 3);
+
+ v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3);
+ len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+ "AR5K_TIMER3 (ATIM)", v, v);
+
+ tsf = ath5k_hw_get_tsf64(sc->ah);
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "TSF\t\t0x%016llx\tTU: %08x\n",
+ (unsigned long long)tsf, TSF_TO_TU(tsf));
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_beacon(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ struct ath5k_hw *ah = sc->ah;
+ char buf[20];
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ if (strncmp(buf, "disable", 7) == 0) {
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+ printk(KERN_INFO "debugfs disable beacons\n");
+ } else if (strncmp(buf, "enable", 6) == 0) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+ printk(KERN_INFO "debugfs enable beacons\n");
+ }
+ return count;
+}
+
+static const struct file_operations fops_beacon = {
+ .read = read_file_beacon,
+ .write = write_file_beacon,
+ .open = ath5k_debugfs_open,
+ .owner = THIS_MODULE,
+};
+
+
+/* debugfs: reset */
+
+static ssize_t write_file_reset(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ tasklet_schedule(&sc->restq);
+ return count;
+}
+
+static const struct file_operations fops_reset = {
+ .write = write_file_reset,
+ .open = ath5k_debugfs_open,
+ .owner = THIS_MODULE,
+};
+
+
+/* debugfs: debug level */
+
+static const struct {
+ enum ath5k_debug_level level;
+ const char *name;
+ const char *desc;
+} dbg_info[] = {
+ { ATH5K_DEBUG_RESET, "reset", "reset and initialization" },
+ { ATH5K_DEBUG_INTR, "intr", "interrupt handling" },
+ { ATH5K_DEBUG_MODE, "mode", "mode init/setup" },
+ { ATH5K_DEBUG_XMIT, "xmit", "basic xmit operation" },
+ { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" },
+ { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" },
+ { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" },
+ { ATH5K_DEBUG_LED, "led", "LED management" },
+ { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" },
+ { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" },
+ { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },
+ { ATH5K_DEBUG_TRACE, "trace", "trace function calls" },
+ { ATH5K_DEBUG_ANY, "all", "show all debug levels" },
+};
+
+static ssize_t read_file_debug(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ char buf[700];
+ unsigned int len = 0;
+ unsigned int i;
+
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "DEBUG LEVEL: 0x%08x\n\n", sc->debug.level);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) {
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "%10s %c 0x%08x - %s\n", dbg_info[i].name,
+ sc->debug.level & dbg_info[i].level ? '+' : ' ',
+ dbg_info[i].level, dbg_info[i].desc);
+ }
+ len += snprintf(buf+len, sizeof(buf)-len,
+ "%10s %c 0x%08x - %s\n", dbg_info[i].name,
+ sc->debug.level == dbg_info[i].level ? '+' : ' ',
+ dbg_info[i].level, dbg_info[i].desc);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_debug(struct file *file,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath5k_softc *sc = file->private_data;
+ unsigned int i;
+ char buf[20];
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(dbg_info); i++) {
+ if (strncmp(buf, dbg_info[i].name,
+ strlen(dbg_info[i].name)) == 0) {
+ sc->debug.level ^= dbg_info[i].level; /* toggle bit */
+ break;
+ }
+ }
+ return count;
+}
+
+static const struct file_operations fops_debug = {
+ .read = read_file_debug,
+ .write = write_file_debug,
+ .open = ath5k_debugfs_open,
+ .owner = THIS_MODULE,
+};
+
+
+/* init */
+
+void
+ath5k_debug_init(void)
+{
+ ath5k_global_debugfs = debugfs_create_dir("ath5k", NULL);
+}
+
+void
+ath5k_debug_init_device(struct ath5k_softc *sc)
+{
+ sc->debug.level = ath5k_debug;
+
+ sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
+ ath5k_global_debugfs);
+
+ sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO,
+ sc->debug.debugfs_phydir, sc, &fops_debug);
+
+ sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO,
+ sc->debug.debugfs_phydir, sc, &fops_registers);
+
+ sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO,
+ sc->debug.debugfs_phydir, sc, &fops_beacon);
+
+ sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
+ sc->debug.debugfs_phydir, sc, &fops_reset);
+}
+
+void
+ath5k_debug_finish(void)
+{
+ debugfs_remove(ath5k_global_debugfs);
+}
+
+void
+ath5k_debug_finish_device(struct ath5k_softc *sc)
+{
+ debugfs_remove(sc->debug.debugfs_debug);
+ debugfs_remove(sc->debug.debugfs_registers);
+ debugfs_remove(sc->debug.debugfs_beacon);
+ debugfs_remove(sc->debug.debugfs_reset);
+ debugfs_remove(sc->debug.debugfs_phydir);
+}
+
+
+/* functions used in other places */
+
+void
+ath5k_debug_dump_bands(struct ath5k_softc *sc)
+{
+ unsigned int b, i;
+
+ if (likely(!(sc->debug.level & ATH5K_DEBUG_DUMPBANDS)))
+ return;
+
+ BUG_ON(!sc->sbands);
+
+ for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
+ struct ieee80211_supported_band *band = &sc->sbands[b];
+ char bname[5];
+ switch (band->band) {
+ case IEEE80211_BAND_2GHZ:
+ strcpy(bname, "2 GHz");
+ break;
+ case IEEE80211_BAND_5GHZ:
+ strcpy(bname, "5 GHz");
+ break;
+ default:
+ printk(KERN_DEBUG "Band not supported: %d\n",
+ band->band);
+ return;
+ }
+ printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname,
+ band->n_channels, band->n_bitrates);
+ printk(KERN_DEBUG " channels:\n");
+ for (i = 0; i < band->n_channels; i++)
+ printk(KERN_DEBUG " %3d %d %.4x %.4x\n",
+ ieee80211_frequency_to_channel(
+ band->channels[i].center_freq),
+ band->channels[i].center_freq,
+ band->channels[i].hw_value,
+ band->channels[i].flags);
+ printk(KERN_DEBUG " rates:\n");
+ for (i = 0; i < band->n_bitrates; i++)
+ printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n",
+ band->bitrates[i].bitrate,
+ band->bitrates[i].hw_value,
+ band->bitrates[i].flags,
+ band->bitrates[i].hw_value_short);
+ }
+}
+
+static inline void
+ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done,
+ struct ath5k_rx_status *rs)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct ath5k_hw_all_rx_desc *rd = &ds->ud.ds_rx;
+
+ printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n",
+ ds, (unsigned long long)bf->daddr,
+ ds->ds_link, ds->ds_data,
+ rd->rx_ctl.rx_control_0, rd->rx_ctl.rx_control_1,
+ rd->u.rx_stat.rx_status_0, rd->u.rx_stat.rx_status_0,
+ !done ? ' ' : (rs->rs_status == 0) ? '*' : '!');
+}
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ struct ath5k_rx_status rs = {};
+ int status;
+
+ if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET)))
+ return;
+
+ printk(KERN_DEBUG "rx queue %x, link %p\n",
+ ath5k_hw_get_rxdp(ah), sc->rxlink);
+
+ spin_lock_bh(&sc->rxbuflock);
+ list_for_each_entry(bf, &sc->rxbuf, list) {
+ ds = bf->desc;
+ status = ah->ah_proc_rx_desc(ah, ds, &rs);
+ if (!status)
+ ath5k_debug_printrxbuf(bf, status == 0, &rs);
+ }
+ spin_unlock_bh(&sc->rxbuflock);
+}
+
+void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+ struct sk_buff *skb, const char *prefix, int tx)
+{
+ char buf[16];
+
+ if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) ||
+ (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX)))))
+ return;
+
+ snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix);
+
+ print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data,
+ min(200U, skb->len));
+
+ printk(KERN_DEBUG "\n");
+}
+
+void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212;
+ struct ath5k_tx_status ts = {};
+ int done;
+
+ if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET)))
+ return;
+
+ done = sc->ah->ah_proc_tx_desc(sc->ah, bf->desc, &ts);
+
+ printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x "
+ "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link,
+ ds->ds_data, td->tx_ctl.tx_control_0, td->tx_ctl.tx_control_1,
+ td->tx_ctl.tx_control_2, td->tx_ctl.tx_control_3,
+ td->tx_stat.tx_status_0, td->tx_stat.tx_status_1,
+ done ? ' ' : (ts.ts_status == 0) ? '*' : '!');
+}
+
+#endif /* ifdef CONFIG_ATH5K_DEBUG */
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
new file mode 100644
index 000000000000..66f69f04e55e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com>
+ *
+ * This file is free software: you may copy, redistribute and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ATH5K_DEBUG_H
+#define _ATH5K_DEBUG_H
+
+struct ath5k_softc;
+struct ath5k_hw;
+struct sk_buff;
+struct ath5k_buf;
+
+struct ath5k_dbg_info {
+ unsigned int level; /* debug level */
+ /* debugfs entries */
+ struct dentry *debugfs_phydir;
+ struct dentry *debugfs_debug;
+ struct dentry *debugfs_registers;
+ struct dentry *debugfs_beacon;
+ struct dentry *debugfs_reset;
+};
+
+/**
+ * enum ath5k_debug_level - ath5k debug level
+ *
+ * @ATH5K_DEBUG_RESET: reset processing
+ * @ATH5K_DEBUG_INTR: interrupt handling
+ * @ATH5K_DEBUG_MODE: mode init/setup
+ * @ATH5K_DEBUG_XMIT: basic xmit operation
+ * @ATH5K_DEBUG_BEACON: beacon handling
+ * @ATH5K_DEBUG_CALIBRATE: periodic calibration
+ * @ATH5K_DEBUG_TXPOWER: transmit power setting
+ * @ATH5K_DEBUG_LED: led management
+ * @ATH5K_DEBUG_DUMP_RX: print received skb content
+ * @ATH5K_DEBUG_DUMP_TX: print transmit skb content
+ * @ATH5K_DEBUG_DUMPBANDS: dump bands
+ * @ATH5K_DEBUG_TRACE: trace function calls
+ * @ATH5K_DEBUG_ANY: show at any debug level
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. The debug level is given in calls to ATH5K_DBG to specify
+ * where the message should appear, and the user can control the debugging
+ * messages he wants to see, either by the module parameter 'debug' on module
+ * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can
+ * be combined together by bitwise OR.
+ */
+enum ath5k_debug_level {
+ ATH5K_DEBUG_RESET = 0x00000001,
+ ATH5K_DEBUG_INTR = 0x00000002,
+ ATH5K_DEBUG_MODE = 0x00000004,
+ ATH5K_DEBUG_XMIT = 0x00000008,
+ ATH5K_DEBUG_BEACON = 0x00000010,
+ ATH5K_DEBUG_CALIBRATE = 0x00000020,
+ ATH5K_DEBUG_TXPOWER = 0x00000040,
+ ATH5K_DEBUG_LED = 0x00000080,
+ ATH5K_DEBUG_DUMP_RX = 0x00000100,
+ ATH5K_DEBUG_DUMP_TX = 0x00000200,
+ ATH5K_DEBUG_DUMPBANDS = 0x00000400,
+ ATH5K_DEBUG_TRACE = 0x00001000,
+ ATH5K_DEBUG_ANY = 0xffffffff
+};
+
+#ifdef CONFIG_ATH5K_DEBUG
+
+#define ATH5K_TRACE(_sc) do { \
+ if (unlikely((_sc)->debug.level & ATH5K_DEBUG_TRACE)) \
+ printk(KERN_DEBUG "ath5k trace %s:%d\n", __func__, __LINE__); \
+ } while (0)
+
+#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \
+ if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \
+ ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+ __func__, __LINE__, ##__VA_ARGS__); \
+ } while (0)
+
+#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \
+ if (unlikely((_sc)->debug.level & (_m))) \
+ ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+ __func__, __LINE__, ##__VA_ARGS__); \
+ } while (0)
+
+void
+ath5k_debug_init(void);
+
+void
+ath5k_debug_init_device(struct ath5k_softc *sc);
+
+void
+ath5k_debug_finish(void);
+
+void
+ath5k_debug_finish_device(struct ath5k_softc *sc);
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah);
+
+void
+ath5k_debug_dump_bands(struct ath5k_softc *sc);
+
+void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+ struct sk_buff *skb, const char *prefix, int tx);
+
+void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf);
+
+#else /* no debugging */
+
+#include <linux/compiler.h>
+
+#define ATH5K_TRACE(_sc) typecheck(struct ath5k_softc *, (_sc))
+
+static inline void __attribute__ ((format (printf, 3, 4)))
+ATH5K_DBG(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {}
+
+static inline void __attribute__ ((format (printf, 3, 4)))
+ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...)
+{}
+
+static inline void
+ath5k_debug_init(void) {}
+
+static inline void
+ath5k_debug_init_device(struct ath5k_softc *sc) {}
+
+static inline void
+ath5k_debug_finish(void) {}
+
+static inline void
+ath5k_debug_finish_device(struct ath5k_softc *sc) {}
+
+static inline void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {}
+
+static inline void
+ath5k_debug_dump_bands(struct ath5k_softc *sc) {}
+
+static inline void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+ struct sk_buff *skb, const char *prefix, int tx) {}
+
+static inline void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) {}
+
+#endif /* ifdef CONFIG_ATH5K_DEBUG */
+
+#endif /* ifndef _ATH5K_DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
new file mode 100644
index 000000000000..dc30a2b70a6b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -0,0 +1,696 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * TX Descriptors
+ */
+
+/*
+ * Initialize the 2-word tx control descriptor on 5210/5211
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
+ unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+ u32 frame_type;
+ struct ath5k_hw_2w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* Clear descriptor */
+ memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN;
+
+ if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+ /*
+ * Verify and set header length
+ * XXX: I only found that on 5210 code, does it work on 5211 ?
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
+ return -EINVAL;
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
+ }
+
+ /*Diferences between 5210-5211*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (type) {
+ case AR5K_PKT_TYPE_BEACON:
+ case AR5K_PKT_TYPE_PROBE_RESP:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+ case AR5K_PKT_TYPE_PIFS:
+ frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+ default:
+ frame_type = type /*<< 2 ?*/;
+ }
+
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+ } else {
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+ AR5K_REG_SM(antenna_mode,
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
+ }
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_2W_TX_DESC_CTL##_c##_##_flag; \
+ }
+
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, VEOL);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+ _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ tx_ctl->tx_control_0 |=
+ AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ tx_ctl->tx_control_1 |=
+ AR5K_REG_SM(key_index,
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+ }
+
+ /*
+ * RTS/CTS Duration [5210 ?]
+ */
+ if ((ah->ah_version == AR5K_AR5210) &&
+ (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+ tx_ctl->tx_control_1 |= rtscts_duration &
+ AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
+
+ return 0;
+}
+
+/*
+ * Initialize the 4-word tx control descriptor on 5212
+ */
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
+ enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
+ unsigned int tx_tries0, unsigned int key_index,
+ unsigned int antenna_mode, unsigned int flags,
+ unsigned int rtscts_rate,
+ unsigned int rtscts_duration)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+ unsigned int frame_len;
+
+ ATH5K_TRACE(ah->ah_sc);
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+ /*
+ * Validate input
+ * - Zero retries don't make sense.
+ * - A zero rate will put the HW into a mode where it continously sends
+ * noise on the channel, so it is important to avoid this.
+ */
+ if (unlikely(tx_tries0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero retries\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ if (unlikely(tx_rate0 == 0)) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ tx_power += ah->ah_txpower.txp_offset;
+ if (tx_power > AR5K_TUNE_MAX_TXPOWER)
+ tx_power = AR5K_TUNE_MAX_TXPOWER;
+
+ /* Clear descriptor */
+ memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
+
+ /* Setup control descriptor */
+
+ /* Verify and set frame length */
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN;
+
+ if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+ /* Verify and set buffer length */
+
+ /* NB: beacon's BufLen must be a multiple of 4 bytes */
+ if (type == AR5K_PKT_TYPE_BEACON)
+ pkt_len = roundup(pkt_len, 4);
+
+ if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+ return -EINVAL;
+
+ tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+ tx_ctl->tx_control_0 |=
+ AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+ AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+ tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
+ AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+ tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+ tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag) \
+ if (flags & AR5K_TXDESC_##_flag) { \
+ tx_ctl->tx_control_##_c |= \
+ AR5K_4W_TX_DESC_CTL##_c##_##_flag; \
+ }
+
+ _TX_FLAGS(0, CLRDMASK);
+ _TX_FLAGS(0, VEOL);
+ _TX_FLAGS(0, INTREQ);
+ _TX_FLAGS(0, RTSENA);
+ _TX_FLAGS(0, CTSENA);
+ _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+ /*
+ * WEP crap
+ */
+ if (key_index != AR5K_TXKEYIX_INVALID) {
+ tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+ tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
+ AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+ }
+
+ /*
+ * RTS/CTS
+ */
+ if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+ if ((flags & AR5K_TXDESC_RTSENA) &&
+ (flags & AR5K_TXDESC_CTSENA))
+ return -EINVAL;
+ tx_ctl->tx_control_2 |= rtscts_duration &
+ AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+ tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+ AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize a 4-word multi rate retry tx control descriptor on 5212
+ */
+static int
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+ u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+
+ /*
+ * Rates can be 0 as long as the retry count is 0 too.
+ * A zero rate and nonzero retry count will put the HW into a mode where
+ * it continously sends noise on the channel, so it is important to
+ * avoid this.
+ */
+ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+ (tx_rate2 == 0 && tx_tries2 != 0) ||
+ (tx_rate3 == 0 && tx_tries3 != 0))) {
+ ATH5K_ERR(ah->ah_sc, "zero rate\n");
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (ah->ah_version == AR5K_AR5212) {
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+#define _XTX_TRIES(_n) \
+ if (tx_tries##_n) { \
+ tx_ctl->tx_control_2 |= \
+ AR5K_REG_SM(tx_tries##_n, \
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \
+ tx_ctl->tx_control_3 |= \
+ AR5K_REG_SM(tx_rate##_n, \
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \
+ }
+
+ _XTX_TRIES(1);
+ _XTX_TRIES(2);
+ _XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* no mrr support for cards older than 5212 */
+static int
+ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+ u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+ return 0;
+}
+
+/*
+ * Proccess the tx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_2w_tx_ctl *tx_ctl;
+ struct ath5k_hw_tx_status *tx_status;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+ tx_status = &desc->ud.ds_tx5210.tx_stat;
+
+ /* No frame has been send or error */
+ if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+ return -EINPROGRESS;
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ /*TODO: ts->ts_virtcol + test*/
+ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = 1;
+ ts->ts_status = 0;
+ ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0,
+ AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+ ts->ts_retry[0] = ts->ts_longretry;
+ ts->ts_final_idx = 0;
+
+ if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (tx_status->tx_status_0 &
+ AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+/*
+ * Proccess a tx status descriptor on 5212
+ */
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+ struct ath5k_hw_4w_tx_ctl *tx_ctl;
+ struct ath5k_hw_tx_status *tx_status;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+ tx_status = &desc->ud.ds_tx5212.tx_stat;
+
+ /* No frame has been send or error */
+ if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Get descriptor status
+ */
+ ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+ ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+ ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+ AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_SEQ_NUM);
+ ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+ ts->ts_antenna = (tx_status->tx_status_1 &
+ AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
+ ts->ts_status = 0;
+
+ ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1,
+ AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX);
+
+ /* The longretry counter has the number of un-acked retries
+ * for the final rate. To get the total number of retries
+ * we have to add the retry counters for the other rates
+ * as well
+ */
+ ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry;
+ switch (ts->ts_final_idx) {
+ case 3:
+ ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
+
+ ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
+ ts->ts_longretry += ts->ts_retry[2];
+ /* fall through */
+ case 2:
+ ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
+
+ ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+ ts->ts_longretry += ts->ts_retry[1];
+ /* fall through */
+ case 1:
+ ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3,
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
+
+ ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2,
+ AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+ ts->ts_longretry += ts->ts_retry[0];
+ /* fall through */
+ case 0:
+ ts->ts_rate[0] = tx_ctl->tx_control_3 &
+ AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+ break;
+ }
+
+ /* TX error */
+ if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+ if (tx_status->tx_status_0 &
+ AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+ ts->ts_status |= AR5K_TXERR_XRETRY;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+ ts->ts_status |= AR5K_TXERR_FIFO;
+
+ if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+ ts->ts_status |= AR5K_TXERR_FILT;
+ }
+
+ return 0;
+}
+
+/*
+ * RX Descriptors
+ */
+
+/*
+ * Initialize an rx control descriptor
+ */
+static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+ u32 size, unsigned int flags)
+{
+ struct ath5k_hw_rx_ctl *rx_ctl;
+
+ ATH5K_TRACE(ah->ah_sc);
+ rx_ctl = &desc->ud.ds_rx.rx_ctl;
+
+ /*
+ * Clear the descriptor
+ * If we don't clean the status descriptor,
+ * while scanning we get too many results,
+ * most of them virtual, after some secs
+ * of scanning system hangs. M.F.
+ */
+ memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
+
+ /* Setup descriptor */
+ rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+ if (unlikely(rx_ctl->rx_control_1 != size))
+ return -EINVAL;
+
+ if (flags & AR5K_RXDESC_INTREQ)
+ rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+ return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+
+ rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+ /* No frame received / not ready */
+ if (unlikely(!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA);
+ rs->rs_more = !!(rx_status->rx_status_0 &
+ AR5K_5210_RX_DESC_STATUS0_MORE);
+ /* TODO: this timestamp is 13 bit, later on we assume 15 bit */
+ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+ rs->rs_status = 0;
+ rs->rs_phyerr = 0;
+
+ /*
+ * Key table status
+ */
+ if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
+ rs->rs_status |= AR5K_RXERR_FIFO;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
+ }
+
+ if (rx_status->rx_status_1 &
+ AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+ }
+
+ return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5212
+ */
+static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+ struct ath5k_hw_rx_status *rx_status;
+ struct ath5k_hw_rx_error *rx_err;
+
+ ATH5K_TRACE(ah->ah_sc);
+ rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+ /* Overlay on error */
+ rx_err = &desc->ud.ds_rx.u.rx_err;
+
+ /* No frame received / not ready */
+ if (unlikely(!(rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_DONE)))
+ return -EINPROGRESS;
+
+ /*
+ * Frame receive status
+ */
+ rs->rs_datalen = rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+ rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+ rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
+ rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0,
+ AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA);
+ rs->rs_more = !!(rx_status->rx_status_0 &
+ AR5K_5212_RX_DESC_STATUS0_MORE);
+ rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+ rs->rs_status = 0;
+ rs->rs_phyerr = 0;
+
+ /*
+ * Key table status
+ */
+ if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+ rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+ AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
+ else
+ rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+ /*
+ * Receive/descriptor errors
+ */
+ if (!(rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_CRC;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+ rs->rs_status |= AR5K_RXERR_PHY;
+ rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
+ AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
+ }
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+ rs->rs_status |= AR5K_RXERR_DECRYPT;
+
+ if (rx_status->rx_status_1 &
+ AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+ rs->rs_status |= AR5K_RXERR_MIC;
+ }
+
+ return 0;
+}
+
+/*
+ * Init function pointers inside ath5k_hw struct
+ */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+{
+
+ if (ah->ah_version != AR5K_AR5210 &&
+ ah->ah_version != AR5K_AR5211 &&
+ ah->ah_version != AR5K_AR5212)
+ return -ENOTSUPP;
+
+ /* XXX: What is this magic value and where is it used ? */
+ if (ah->ah_version == AR5K_AR5212)
+ ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
+ else if (ah->ah_version == AR5K_AR5211)
+ ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
+
+ if (ah->ah_version == AR5K_AR5212) {
+ ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+ ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+ ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+ } else {
+ ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+ ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+ ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr;
+ ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+ }
+
+ if (ah->ah_version == AR5K_AR5212)
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
+ else if (ah->ah_version <= AR5K_AR5211)
+ ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
new file mode 100644
index 000000000000..56158c804e3e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/desc.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Internal RX/TX descriptor structures
+ * (rX: reserved fields possibily used by future versions of the ar5k chipset)
+ */
+
+/*
+ * common hardware RX control descriptor
+ */
+struct ath5k_hw_rx_ctl {
+ u32 rx_control_0; /* RX control word 0 */
+ u32 rx_control_1; /* RX control word 1 */
+} __packed;
+
+/* RX control word 0 field/sflags */
+#define AR5K_DESC_RX_CTL0 0x00000000
+
+/* RX control word 1 fields/flags */
+#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff
+#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000
+
+/*
+ * common hardware RX status descriptor
+ * 5210/11 and 5212 differ only in the flags defined below
+ */
+struct ath5k_hw_rx_status {
+ u32 rx_status_0; /* RX status word 0 */
+ u32 rx_status_1; /* RX status word 1 */
+} __packed;
+
+/* 5210/5211 */
+/* RX status word 0 fields/flags */
+#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff
+#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE_S 15
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000
+#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27
+
+/* RX status word 1 fields/flags */
+#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001
+#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002
+#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004
+#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN 0x00000008
+#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010
+#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0
+#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00
+#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9
+#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000
+#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15
+#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000
+
+/* 5212 */
+/* RX status word 0 fields/flags */
+#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff
+#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000
+#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE_S 15
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000
+#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28
+
+/* RX status word 1 fields/flags */
+#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001
+#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002
+#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004
+#define AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008
+#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR 0x00000010
+#define AR5K_5212_RX_DESC_STATUS1_MIC_ERROR 0x00000020
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00
+#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_S 9
+#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000
+#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16
+#define AR5K_5212_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000
+
+/*
+ * common hardware RX error descriptor
+ */
+struct ath5k_hw_rx_error {
+ u32 rx_error_0; /* RX status word 0 */
+ u32 rx_error_1; /* RX status word 1 */
+} __packed;
+
+/* RX error word 0 fields/flags */
+#define AR5K_RX_DESC_ERROR0 0x00000000
+
+/* RX error word 1 fields/flags */
+#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00
+#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8
+
+/* PHY Error codes */
+#define AR5K_DESC_RX_PHY_ERROR_NONE 0x00
+#define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20
+#define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40
+#define AR5K_DESC_RX_PHY_ERROR_RATE 0x60
+#define AR5K_DESC_RX_PHY_ERROR_LENGTH 0x80
+#define AR5K_DESC_RX_PHY_ERROR_64QAM 0xa0
+#define AR5K_DESC_RX_PHY_ERROR_SERVICE 0xc0
+#define AR5K_DESC_RX_PHY_ERROR_TRANSMITOVR 0xe0
+
+/*
+ * 5210/5211 hardware 2-word TX control descriptor
+ */
+struct ath5k_hw_2w_tx_ctl {
+ u32 tx_control_0; /* TX control word 0 */
+ u32 tx_control_1; /* TX control word 1 */
+} __packed;
+
+/* TX control word 0 fields/flags */
+#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18
+#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000
+#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000
+#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET 0x00800000 /*[5210]*/
+#define AR5K_2W_TX_DESC_CTL0_VEOL 0x00800000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE 0x1c000000 /*[5210]*/
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000
+
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
+ AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25
+#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000
+#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000
+
+/* TX control word 1 fields/flags */
+#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff
+#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000
+
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \
+ (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
+ AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20
+#define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/
+
+/* Frame types */
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 0x0c
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 0x10
+
+/*
+ * 5212 hardware 4-word TX control descriptor
+ */
+struct ath5k_hw_4w_tx_ctl {
+ u32 tx_control_0; /* TX control word 0 */
+
+#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16
+#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000
+#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000
+#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25
+#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000
+#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000
+#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000
+
+ u32 tx_control_1; /* TX control word 1 */
+
+#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff
+#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX 0x000fe000
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20
+#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29
+
+ u32 tx_control_2; /* TX control word 2 */
+
+#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff
+#define AR5K_4W_TX_DESC_CTL2_DURATION_UPDATE_ENABLE 0x00008000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28
+
+ u32 tx_control_3; /* TX control word 3 */
+
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20
+} __packed;
+
+/*
+ * Common TX status descriptor
+ */
+struct ath5k_hw_tx_status {
+ u32 tx_status_0; /* TX status word 0 */
+ u32 tx_status_1; /* TX status word 1 */
+} __packed;
+
+/* TX status word 0 fields/flags */
+#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001
+#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002
+#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004
+#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008
+/*???
+#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT 0x000000f0
+#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT_S 4
+*/
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4
+/*???
+#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT 0x00000f00
+#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT_S 8
+*/
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8
+#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT 0x0000f000
+#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT_S 12
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16
+
+/* TX status word 1 fields/flags */
+#define AR5K_DESC_TX_STATUS1_DONE 0x00000001
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX 0x00600000
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21
+#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000
+#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000
+
+/*
+ * 5210/5211 hardware TX descriptor
+ */
+struct ath5k_hw_5210_tx_desc {
+ struct ath5k_hw_2w_tx_ctl tx_ctl;
+ struct ath5k_hw_tx_status tx_stat;
+} __packed;
+
+/*
+ * 5212 hardware TX descriptor
+ */
+struct ath5k_hw_5212_tx_desc {
+ struct ath5k_hw_4w_tx_ctl tx_ctl;
+ struct ath5k_hw_tx_status tx_stat;
+} __packed;
+
+/*
+ * common hardware RX descriptor
+ */
+struct ath5k_hw_all_rx_desc {
+ struct ath5k_hw_rx_ctl rx_ctl;
+ union {
+ struct ath5k_hw_rx_status rx_stat;
+ struct ath5k_hw_rx_error rx_err;
+ } u;
+} __packed;
+
+/*
+ * Atheros hardware descriptor
+ * This is read and written to by the hardware
+ */
+struct ath5k_desc {
+ u32 ds_link; /* physical address of the next descriptor */
+ u32 ds_data; /* physical address of data buffer (skb) */
+
+ union {
+ struct ath5k_hw_5210_tx_desc ds_tx5210;
+ struct ath5k_hw_5212_tx_desc ds_tx5212;
+ struct ath5k_hw_all_rx_desc ds_rx;
+ } ud;
+} __packed;
+
+#define AR5K_RXDESC_INTREQ 0x0020
+
+#define AR5K_TXDESC_CLRDMASK 0x0001
+#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
+#define AR5K_TXDESC_RTSENA 0x0004
+#define AR5K_TXDESC_CTSENA 0x0008
+#define AR5K_TXDESC_INTREQ 0x0010
+#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
+
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
new file mode 100644
index 000000000000..b65b4feb2d28
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -0,0 +1,705 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* DMA and interrupt masking functions *
+\*************************************/
+
+/*
+ * dma.c - DMA and interrupt masking functions
+ *
+ * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
+ * handle queue setup for 5210 chipset (rest are handled on qcu.c).
+ * Also we setup interrupt mask register (IMR) and read the various iterrupt
+ * status registers (ISR).
+ *
+ * TODO: Handle SISR on 5211+ and introduce a function to return the queue
+ * number that resulted the interrupt.
+ */
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*********\
+* Receive *
+\*********/
+
+/**
+ * ath5k_hw_start_rx_dma - Start DMA receive
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+}
+
+/**
+ * ath5k_hw_stop_rx_dma - Stop DMA receive
+ *
+ * @ah: The &struct ath5k_hw
+ */
+int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+ unsigned int i;
+
+ ATH5K_TRACE(ah->ah_sc);
+ ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+ /*
+ * It may take some time to disable the DMA receive unit
+ */
+ for (i = 1000; i > 0 &&
+ (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+ i--)
+ udelay(10);
+
+ return i ? 0 : -EBUSY;
+}
+
+/**
+ * ath5k_hw_get_rxdp - Get RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * XXX: Is RXDP read and clear ?
+ */
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+{
+ return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/**
+ * ath5k_hw_set_rxdp - Set RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ * @phys_addr: RX descriptor address
+ *
+ * XXX: Should we check if rx is enabled before setting rxdp ?
+ */
+void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+}
+
+
+/**********\
+* Transmit *
+\**********/
+
+/**
+ * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Start DMA transmit for a specific queue and since 5210 doesn't have
+ * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
+ * queue for normal data and one queue for beacons). For queue setup
+ * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
+ * of range or if queue is already disabled.
+ *
+ * NOTE: Must be called after setting up tx control descriptor for that
+ * queue (see below).
+ */
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 tx_queue;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set the queue by type on 5210
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BSR);
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+ AR5K_BCR_BDMAE, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Start queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+ /* Return if queue is disabled */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+ return -EIO;
+
+ /* Start queue */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+ }
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Stop DMA transmit on a specific hw queue and drain queue so we don't
+ * have any pending frames. Returns -EBUSY if we still have pending frames,
+ * -EINVAL if queue number is out of range.
+ *
+ */
+int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+ unsigned int i = 40;
+ u32 tx_queue, pending;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+ /*
+ * Set by queue type
+ */
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ /* XXX Fix me... */
+ tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+ ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Stop queue */
+ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+ ath5k_hw_reg_read(ah, AR5K_CR);
+ } else {
+ /*
+ * Schedule TX disable and wait until queue is empty
+ */
+ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+ /*Check for pending frames*/
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ /* For 2413+ order PCU to drop packets using
+ * QUIET mechanism */
+ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+ pending){
+ /* Set periodicity and duration */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+ AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+ AR5K_QUIET_CTL2);
+
+ /* Enable quiet period for current TSF */
+ ath5k_hw_reg_write(ah,
+ AR5K_QUIET_CTL1_QT_EN |
+ AR5K_REG_SM(ath5k_hw_reg_read(ah,
+ AR5K_TSF_L32_5211) >> 10,
+ AR5K_QUIET_CTL1_NEXT_QT_TSF),
+ AR5K_QUIET_CTL1);
+
+ /* Force channel idle high */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+
+ /* Wait a while and disable mechanism */
+ udelay(200);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+ AR5K_QUIET_CTL1_QT_EN);
+
+ /* Re-check for pending frames */
+ i = 40;
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+ }
+
+ /* Clear register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+ if (pending)
+ return -EBUSY;
+ }
+
+ /* TODO: Check for success on 5210 else return error */
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Get TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and use tx queue type since we only have 2 queues.
+ * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just read the corresponding TXDP register.
+ *
+ * XXX: Is TXDP read and clear ?
+ */
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+{
+ u16 tx_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Get the transmit queue descriptor pointer from the selected queue
+ */
+ /*5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return 0xffffffff;
+ }
+ } else {
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/**
+ * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Set TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and we use tx queue type since we only have 2 queues
+ * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just set the corresponding TXDP register.
+ * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
+ * active.
+ */
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+ u16 tx_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /*
+ * Set the transmit queue descriptor pointer register by type
+ * on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (ah->ah_txq[queue].tqi_type) {
+ case AR5K_TX_QUEUE_DATA:
+ tx_reg = AR5K_NOQCU_TXDP0;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ tx_reg = AR5K_NOQCU_TXDP1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ /*
+ * Set the transmit queue descriptor pointer for
+ * the selected queue on QCU for 5211+
+ * (this won't work if the queue is still active)
+ */
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return -EIO;
+
+ tx_reg = AR5K_QUEUE_TXDP(queue);
+ }
+
+ /* Set descriptor pointer */
+ ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update_tx_triglevel - Update tx trigger level
+ *
+ * @ah: The &struct ath5k_hw
+ * @increase: Flag to force increase of trigger level
+ *
+ * This function increases/decreases the tx trigger level for the tx fifo
+ * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
+ * the buffer and transmits it's data. Lowering this results sending small
+ * frames more quickly but can lead to tx underruns, raising it a lot can
+ * result other problems (i think bmiss is related). Right now we start with
+ * the lowest possible (64Bytes) and if we get tx underrun we increase it using
+ * the increase flag. Returns -EIO if we have have reached maximum/minimum.
+ *
+ * XXX: Link this with tx DMA size ?
+ * XXX: Use it to save interrupts ?
+ * TODO: Needs testing, i think it's related to bmiss...
+ */
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+ u32 trigger_level, imr;
+ int ret = -EIO;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Disable interrupts by setting the mask
+ */
+ imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+ trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+ AR5K_TXCFG_TXFULL);
+
+ if (!increase) {
+ if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+ goto done;
+ } else
+ trigger_level +=
+ ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+ /*
+ * Update trigger level on success
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_TXFULL, trigger_level);
+
+ ret = 0;
+
+done:
+ /*
+ * Restore interrupt mask
+ */
+ ath5k_hw_set_imr(ah, imr);
+
+ return ret;
+}
+
+/*******************\
+* Interrupt masking *
+\*******************/
+
+/**
+ * ath5k_hw_is_intr_pending - Check if we have pending interrupts
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if we have pending interrupts to process. Returns 1 if we
+ * have pending interrupts and 0 if we haven't.
+ */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
+}
+
+/**
+ * ath5k_hw_get_isr - Get interrupt status
+ *
+ * @ah: The @struct ath5k_hw
+ * @interrupt_mask: Driver's interrupt mask used to filter out
+ * interrupts in sw.
+ *
+ * This function is used inside our interrupt handler to determine the reason
+ * for the interrupt by reading Primary Interrupt Status Register. Returns an
+ * abstract interrupt status mask which is mostly ISR with some uncommon bits
+ * being mapped on some standard non hw-specific positions
+ * (check out &ath5k_int).
+ *
+ * NOTE: We use read-and-clear register, so after this function is called ISR
+ * is zeroed.
+ */
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+ u32 data;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Read interrupt status from the Interrupt Status register
+ * on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ data = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(data == AR5K_INT_NOCARD)) {
+ *interrupt_mask = data;
+ return -ENODEV;
+ }
+ } else {
+ /*
+ * Read interrupt status from Interrupt
+ * Status Register shadow copy (Read And Clear)
+ *
+ * Note: PISR/SISR Not available on 5210
+ */
+ data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+ if (unlikely(data == AR5K_INT_NOCARD)) {
+ *interrupt_mask = data;
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * Get abstract interrupt mask (driver-compatible)
+ */
+ *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
+
+ /*HIU = Host Interface Unit (PCI etc)*/
+ if (unlikely(data & (AR5K_ISR_HIUERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*Beacon Not Ready*/
+ if (unlikely(data & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+
+ if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
+ AR5K_SISR2_DPERR |
+ AR5K_SISR2_MCABT)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ if (data & AR5K_ISR_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+
+ if (data & AR5K_ISR_BCNMISC) {
+ if (sisr2 & AR5K_SISR2_TIM)
+ *interrupt_mask |= AR5K_INT_TIM;
+ if (sisr2 & AR5K_SISR2_DTIM)
+ *interrupt_mask |= AR5K_INT_DTIM;
+ if (sisr2 & AR5K_SISR2_DTIM_SYNC)
+ *interrupt_mask |= AR5K_INT_DTIM_SYNC;
+ if (sisr2 & AR5K_SISR2_BCN_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_BCN_TIMEOUT;
+ if (sisr2 & AR5K_SISR2_CAB_TIMEOUT)
+ *interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
+ }
+
+ if (data & AR5K_ISR_RXDOPPLER)
+ *interrupt_mask |= AR5K_INT_RX_DOPPLER;
+ if (data & AR5K_ISR_QCBRORN) {
+ *interrupt_mask |= AR5K_INT_QCBRORN;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
+ AR5K_SISR3_QCBRORN);
+ }
+ if (data & AR5K_ISR_QCBRURN) {
+ *interrupt_mask |= AR5K_INT_QCBRURN;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
+ AR5K_SISR3_QCBRURN);
+ }
+ if (data & AR5K_ISR_QTRIG) {
+ *interrupt_mask |= AR5K_INT_QTRIG;
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
+ AR5K_SISR4_QTRIG);
+ }
+
+ if (data & AR5K_ISR_TXOK)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
+ AR5K_SISR0_QCU_TXOK);
+
+ if (data & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
+ AR5K_SISR0_QCU_TXDESC);
+
+ if (data & AR5K_ISR_TXERR)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
+ AR5K_SISR1_QCU_TXERR);
+
+ if (data & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
+ AR5K_SISR1_QCU_TXEOL);
+
+ if (data & AR5K_ISR_TXURN)
+ ah->ah_txq_isr |= AR5K_REG_MS(
+ ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
+ AR5K_SISR2_QCU_TXURN);
+ } else {
+ if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successful assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+ }
+
+ /*
+ * In case we didn't handle anything,
+ * print the register value.
+ */
+ if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+ ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_imr - Set interrupt mask
+ *
+ * @ah: The &struct ath5k_hw
+ * @new_mask: The new interrupt mask to be set
+ *
+ * Set the interrupt mask in hw to save interrupts. We do that by mapping
+ * ath5k_int bits to hw-specific bits to remove abstraction and writing
+ * Interrupt Mask Register.
+ */
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+ enum ath5k_int old_mask, int_mask;
+
+ old_mask = ah->ah_imr;
+
+ /*
+ * Disable card interrupts to prevent any race conditions
+ * (they will be re-enabled afterwards if AR5K_INT GLOBAL
+ * is set again on the new mask).
+ */
+ if (old_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
+
+ /*
+ * Add additional, chipset-dependent interrupt mask flags
+ * and write them to the IMR (interrupt mask register).
+ */
+ int_mask = new_mask & AR5K_INT_COMMON;
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /* Preserve per queue TXURN interrupt mask */
+ u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
+ & AR5K_SIMR2_QCU_TXURN;
+
+ if (new_mask & AR5K_INT_FATAL) {
+ int_mask |= AR5K_IMR_HIUERR;
+ simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
+ | AR5K_SIMR2_DPERR);
+ }
+
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
+
+ if (new_mask & AR5K_INT_TIM)
+ int_mask |= AR5K_IMR_TIM;
+
+ if (new_mask & AR5K_INT_TIM)
+ simr2 |= AR5K_SISR2_TIM;
+ if (new_mask & AR5K_INT_DTIM)
+ simr2 |= AR5K_SISR2_DTIM;
+ if (new_mask & AR5K_INT_DTIM_SYNC)
+ simr2 |= AR5K_SISR2_DTIM_SYNC;
+ if (new_mask & AR5K_INT_BCN_TIMEOUT)
+ simr2 |= AR5K_SISR2_BCN_TIMEOUT;
+ if (new_mask & AR5K_INT_CAB_TIMEOUT)
+ simr2 |= AR5K_SISR2_CAB_TIMEOUT;
+
+ if (new_mask & AR5K_INT_RX_DOPPLER)
+ int_mask |= AR5K_IMR_RXDOPPLER;
+
+ /* Note: Per queue interrupt masks
+ * are set via reset_tx_queue (qcu.c) */
+ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+ ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
+
+ } else {
+ if (new_mask & AR5K_INT_FATAL)
+ int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
+ | AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+
+ ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
+ }
+
+ /* If RXNOFRM interrupt is masked disable it
+ * by setting AR5K_RXNOFRM to zero */
+ if (!(new_mask & AR5K_INT_RXNOFRM))
+ ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM);
+
+ /* Store new interrupt mask */
+ ah->ah_imr = new_mask;
+
+ /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */
+ if (new_mask & AR5K_INT_GLOBAL) {
+ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+ ath5k_hw_reg_read(ah, AR5K_IER);
+ }
+
+ return old_mask;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
new file mode 100644
index 000000000000..c0fb3b09ba45
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -0,0 +1,1769 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Read from eeprom
+ */
+static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+ u32 status, timeout;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Initialize EEPROM access
+ */
+ if (ah->ah_version == AR5K_AR5210) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+ (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+ } else {
+ ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+ AR5K_EEPROM_CMD_READ);
+ }
+
+ for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+ status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+ if (status & AR5K_EEPROM_STAT_RDDONE) {
+ if (status & AR5K_EEPROM_STAT_RDERR)
+ return -EIO;
+ *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+ 0xffff);
+ return 0;
+ }
+ udelay(15);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
+ unsigned int mode)
+{
+ u16 val;
+
+ if (bin == AR5K_EEPROM_CHANNEL_DIS)
+ return bin;
+
+ if (mode == AR5K_EEPROM_MODE_11A) {
+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = (5 * bin) + 4800;
+ else
+ val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+ (bin * 10) + 5100;
+ } else {
+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+ val = bin + 2300;
+ else
+ val = bin + 2400;
+ }
+
+ return val;
+}
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+static int
+ath5k_eeprom_init_header(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ int ret;
+ u16 val;
+
+ /*
+ * Read values from EEPROM and store them in the capability structure
+ */
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+ /* Return if we have an old EEPROM */
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+ return 0;
+
+#ifdef notyet
+ /*
+ * Validate the checksum of the EEPROM date. There are some
+ * devices with invalid EEPROMs.
+ */
+ for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+ cksum ^= val;
+ }
+ if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+ return -EIO;
+ }
+#endif
+
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+ ee_ant_gain);
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+
+ /* XXX: Don't know which versions include these two */
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2);
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3)
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3);
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) {
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5);
+ AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6);
+ }
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+ ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+ ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int ret, i = 0;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_switch_settling[mode] = (val >> 8) & 0x7f;
+ ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 2) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3;
+ ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f;
+ ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f;
+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
+ ee->ee_ant_control[mode][i++] = val & 0x3f;
+
+ /* Get antenna modes */
+ ah->ah_antenna[mode][0] =
+ (ee->ee_ant_control[mode][0] << 4);
+ ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+ ee->ee_ant_control[mode][1] |
+ (ee->ee_ant_control[mode][2] << 6) |
+ (ee->ee_ant_control[mode][3] << 12) |
+ (ee->ee_ant_control[mode][4] << 18) |
+ (ee->ee_ant_control[mode][5] << 24);
+ ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+ ee->ee_ant_control[mode][6] |
+ (ee->ee_ant_control[mode][7] << 6) |
+ (ee->ee_ant_control[mode][8] << 12) |
+ (ee->ee_ant_control[mode][9] << 18) |
+ (ee->ee_ant_control[mode][10] << 24);
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/*
+ * Read supported modes and some mode-specific calibration data
+ * from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+ unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int ret;
+
+ ee->ee_n_piers[mode] = 0;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff);
+ switch(mode) {
+ case AR5K_EEPROM_MODE_11A:
+ ee->ee_ob[mode][3] = (val >> 5) & 0x7;
+ ee->ee_db[mode][3] = (val >> 2) & 0x7;
+ ee->ee_ob[mode][2] = (val << 1) & 0x7;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_ob[mode][2] |= (val >> 15) & 0x1;
+ ee->ee_db[mode][2] = (val >> 12) & 0x7;
+ ee->ee_ob[mode][1] = (val >> 9) & 0x7;
+ ee->ee_db[mode][1] = (val >> 6) & 0x7;
+ ee->ee_ob[mode][0] = (val >> 3) & 0x7;
+ ee->ee_db[mode][0] = val & 0x7;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ case AR5K_EEPROM_MODE_11B:
+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
+ ee->ee_db[mode][1] = val & 0x7;
+ break;
+ }
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
+ ee->ee_thr_62[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
+ ee->ee_tx_frm2xpa_enable[mode] = val & 0xff;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff;
+
+ if ((val & 0xff) & 0x80)
+ ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+ else
+ ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+ ee->ee_noise_floor_thr[mode] =
+ mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_xlna_gain[mode] = (val >> 5) & 0xff;
+ ee->ee_x_gain[mode] = (val >> 1) & 0xf;
+ ee->ee_xpd[mode] = val & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
+ ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+ if (mode == AR5K_EEPROM_MODE_11A)
+ ee->ee_xr_power[mode] = val & 0x3f;
+ else {
+ ee->ee_ob[mode][0] = val & 0x7;
+ ee->ee_db[mode][0] = (val >> 3) & 0x7;
+ }
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+ ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+ ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+ } else {
+ ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+ if (mode == AR5K_EEPROM_MODE_11G) {
+ ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6)
+ ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+ }
+ }
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+ mode == AR5K_EEPROM_MODE_11A) {
+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+ }
+
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0)
+ goto done;
+
+ /* Note: >= v5 have bg freq piers on another location
+ * so these freq piers are ignored for >= v5 (should be 0xff
+ * anyway) */
+ switch(mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1)
+ break;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_margin_tx_rx[mode] = val & 0x3f;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ AR5K_EEPROM_READ(o++, val);
+
+ ee->ee_pwr_cal_b[0].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ ee->ee_pwr_cal_b[1].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+ if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pwr_cal_b[2].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ AR5K_EEPROM_READ(o++, val);
+
+ ee->ee_pwr_cal_g[0].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ ee->ee_pwr_cal_g[1].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+ if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_turbo_max_power[mode] = val & 0x7f;
+ ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_pwr_cal_g[2].freq =
+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+ if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+ ee->ee_n_piers[mode]++;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_cck_ofdm_gain_delta = val & 0xff;
+ }
+ break;
+ }
+
+done:
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/*
+ * Read turbo mode information on newer EEPROM versions
+ */
+static int
+ath5k_eeprom_read_turbo_modes(struct ath5k_hw *ah,
+ u32 *offset, unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 o = *offset;
+ u16 val;
+ int ret;
+
+ if (ee->ee_version < AR5K_EEPROM_VERSION_5_0)
+ return 0;
+
+ switch (mode){
+ case AR5K_EEPROM_MODE_11A:
+ ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f;
+
+ ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3;
+ ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f;
+
+ ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7;
+ ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff;
+
+ if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2)
+ ee->ee_pd_gain_overlap = (val >> 9) & 0xf;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f;
+
+ ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1;
+ ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f;
+
+ ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f;
+ AR5K_EEPROM_READ(o++, val);
+ ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5;
+ ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff;
+ break;
+ }
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/* Read mode-specific data (except power calibration data) */
+static int
+ath5k_eeprom_init_modes(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 mode_offset[3];
+ unsigned int mode;
+ u32 offset;
+ int ret;
+
+ /*
+ * Get values for all modes
+ */
+ mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+ mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+ mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+ ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] =
+ AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
+ offset = mode_offset[mode];
+
+ ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+
+ ret = ath5k_eeprom_read_turbo_modes(ah, &offset, mode);
+ if (ret)
+ return ret;
+ }
+
+ /* override for older eeprom versions for better performance */
+ if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) {
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15;
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28;
+ ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28;
+ }
+
+ return 0;
+}
+
+/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff
+ * frequency mask) */
+static inline int
+ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
+ struct ath5k_chan_pcal_info *pc, unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ int o = *offset;
+ int i = 0;
+ u8 freq1, freq2;
+ int ret;
+ u16 val;
+
+ ee->ee_n_piers[mode] = 0;
+ while(i < max) {
+ AR5K_EEPROM_READ(o++, val);
+
+ freq1 = val & 0xff;
+ if (!freq1)
+ break;
+
+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+ freq1, mode);
+ ee->ee_n_piers[mode]++;
+
+ freq2 = (val >> 8) & 0xff;
+ if (!freq2)
+ break;
+
+ pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+ freq2, mode);
+ ee->ee_n_piers[mode]++;
+ }
+
+ /* return new offset */
+ *offset = o;
+
+ return 0;
+}
+
+/* Read frequency piers for 802.11a */
+static int
+ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a;
+ int i, ret;
+ u16 val;
+ u8 mask;
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ ath5k_eeprom_read_freq_list(ah, &offset,
+ AR5K_EEPROM_N_5GHZ_CHAN, pcal,
+ AR5K_EEPROM_MODE_11A);
+ } else {
+ mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version);
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[0].freq = (val >> 9) & mask;
+ pcal[1].freq = (val >> 2) & mask;
+ pcal[2].freq = (val << 5) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[2].freq |= (val >> 11) & 0x1f;
+ pcal[3].freq = (val >> 4) & mask;
+ pcal[4].freq = (val << 3) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[4].freq |= (val >> 13) & 0x7;
+ pcal[5].freq = (val >> 6) & mask;
+ pcal[6].freq = (val << 1) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[6].freq |= (val >> 15) & 0x1;
+ pcal[7].freq = (val >> 8) & mask;
+ pcal[8].freq = (val >> 1) & mask;
+ pcal[9].freq = (val << 6) & mask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcal[9].freq |= (val >> 10) & 0x3f;
+
+ /* Fixed number of piers */
+ ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10;
+
+ for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) {
+ pcal[i].freq = ath5k_eeprom_bin2freq(ee,
+ pcal[i].freq, AR5K_EEPROM_MODE_11A);
+ }
+ }
+
+ return 0;
+}
+
+/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */
+static inline int
+ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal;
+
+ switch(mode) {
+ case AR5K_EEPROM_MODE_11B:
+ pcal = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ pcal = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ath5k_eeprom_read_freq_list(ah, &offset,
+ AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal,
+ mode);
+
+ return 0;
+}
+
+/*
+ * Read power calibration for RF5111 chips
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * here and interpolate later.
+ */
+
+/* Used to match PCDAC steps with power values on RF5111 chips
+ * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
+ * steps that match with the power values we read from eeprom. On
+ * older eeprom versions (< 3.2) these steps are equaly spaced at
+ * 10% of the pcdac curve -until the curve reaches it's maximum-
+ * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
+ * these 11 steps are spaced in a different way. This function returns
+ * the pcdac steps based on eeprom version and curve min/max so that we
+ * can have pcdac/pwr points.
+ */
+static inline void
+ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
+{
+ const static u16 intercepts3[] =
+ { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
+ const static u16 intercepts3_2[] =
+ { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
+ const u16 *ip;
+ int i;
+
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2)
+ ip = intercepts3_2;
+ else
+ ip = intercepts3;
+
+ for (i = 0; i < ARRAY_SIZE(intercepts3); i++)
+ vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100;
+}
+
+/* Convert RF5111 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5111 *pcinfo;
+ struct ath5k_pdgain_info *pd;
+ u8 pier, point, idx;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf5111_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ return -ENOMEM;
+
+ /* Only one curve for RF5111
+ * find out which one and place
+ * in in pd_curves.
+ * Note: ee_x_gain is reversed here */
+ for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
+
+ if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) {
+ pdgain_idx[0] = idx;
+ break;
+ }
+ }
+
+ ee->ee_pd_gains[mode] = 1;
+
+ pd = &chinfo[pier].pd_curves[idx];
+
+ pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+ sizeof(u8), GFP_KERNEL);
+ if (!pd->pd_step)
+ return -ENOMEM;
+
+ pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+ sizeof(s16), GFP_KERNEL);
+ if (!pd->pd_pwr)
+ return -ENOMEM;
+
+ /* Fill raw dataset
+ * (convert power to 0.25dB units
+ * for RF5112 combatibility) */
+ for (point = 0; point < pd->pd_points; point++) {
+
+ /* Absolute values */
+ pd->pd_pwr[point] = 2 * pcinfo->pwr[point];
+
+ /* Already sorted */
+ pd->pd_step[point] = pcinfo->pcdac[point];
+ }
+
+ /* Set min/max pwr */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+ chinfo[pier].max_pwr = pd->pd_pwr[10];
+
+ }
+
+ return 0;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcal;
+ int offset, ret;
+ int i;
+ u16 val;
+
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ switch(mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+
+ ret = ath5k_eeprom_init_11a_pcal_freq(ah,
+ offset + AR5K_EEPROM_GROUP1_OFFSET);
+ if (ret < 0)
+ return ret;
+
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+ pcal = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header) &&
+ !AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ pcal = ee->ee_pwr_cal_b;
+ offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+ /* fixed piers */
+ pcal[0].freq = 2412;
+ pcal[1].freq = 2447;
+ pcal[2].freq = 2484;
+ ee->ee_n_piers[mode] = 3;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ pcal = ee->ee_pwr_cal_g;
+ offset += AR5K_EEPROM_GROUP4_OFFSET;
+
+ /* fixed piers */
+ pcal[0].freq = 2312;
+ pcal[1].freq = 2412;
+ pcal[2].freq = 2484;
+ ee->ee_n_piers[mode] = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ struct ath5k_chan_pcal_info_rf5111 *cdata =
+ &pcal[i].rf5111_info;
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M);
+ cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M);
+ cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[0] |= ((val >> 14) & 0x3);
+ cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[3] |= ((val >> 12) & 0xf);
+ cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M);
+
+ AR5K_EEPROM_READ(offset++, val);
+ cdata->pwr[8] |= ((val >> 14) & 0x3);
+ cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M);
+ cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M);
+
+ ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min,
+ cdata->pcdac_max, cdata->pcdac);
+ }
+
+ return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal);
+}
+
+
+/*
+ * Read power calibration for RF5112 chips
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dbm but we only
+ * use the higher (3) and the lower (0) curves. Each curve has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we read 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) here and
+ * interpolate later.
+ *
+ * Note: Many vendors just use xpd 0 so xpd 3 is zeroed.
+ */
+
+/* Convert RF5112 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5112 *pcinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ unsigned int pier, pdg, point;
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf5112_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ return -ENOMEM;
+
+ /* Fill pd_curves */
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+ u8 idx = pdgain_idx[pdg];
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[idx];
+
+ /* Lowest gain curve (max power) */
+ if (pdg == 0) {
+ /* One more point for better accuracy */
+ pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ return -ENOMEM;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ return -ENOMEM;
+
+
+ /* Fill raw dataset
+ * (all power levels are in 0.25dB units) */
+ pd->pd_step[0] = pcinfo->pcdac_x0[0];
+ pd->pd_pwr[0] = pcinfo->pwr_x0[0];
+
+ for (point = 1; point < pd->pd_points;
+ point++) {
+ /* Absolute values */
+ pd->pd_pwr[point] =
+ pcinfo->pwr_x0[point];
+
+ /* Deltas */
+ pd->pd_step[point] =
+ pd->pd_step[point - 1] +
+ pcinfo->pcdac_x0[point];
+ }
+
+ /* Set min power for this frequency */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+ /* Highest gain curve (min power) */
+ } else if (pdg == 1) {
+
+ pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ return -ENOMEM;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ return -ENOMEM;
+
+ /* Fill raw dataset
+ * (all power levels are in 0.25dB units) */
+ for (point = 0; point < pd->pd_points;
+ point++) {
+ /* Absolute values */
+ pd->pd_pwr[point] =
+ pcinfo->pwr_x3[point];
+
+ /* Fixed points */
+ pd->pd_step[point] =
+ pcinfo->pcdac_x3[point];
+ }
+
+ /* Since we have a higher gain curve
+ * override min power */
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info;
+ struct ath5k_chan_pcal_info *gen_chan_info;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ u32 offset;
+ u8 i, c;
+ u16 val;
+ int ret;
+ u8 pd_gains = 0;
+
+ /* Count how many curves we have and
+ * identify them (which one of the 4
+ * available curves we have on each count).
+ * Curves are stored from lower (x0) to
+ * higher (x3) gain */
+ for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) {
+ /* ee_x_gain[mode] is x gain mask */
+ if ((ee->ee_x_gain[mode] >> i) & 0x1)
+ pdgain_idx[pd_gains++] = i;
+ }
+ ee->ee_pd_gains[mode] = pd_gains;
+
+ if (pd_gains == 0 || pd_gains > 2)
+ return -EINVAL;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ /*
+ * Read 5GHz EEPROM channels
+ */
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+ gen_chan_info = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP3_OFFSET;
+
+ /* NB: frequency piers parsed during mode init */
+ gen_chan_info = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ offset = AR5K_EEPROM_GROUPS_START(ee->ee_version);
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP4_OFFSET;
+ else if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+ offset += AR5K_EEPROM_GROUP2_OFFSET;
+
+ /* NB: frequency piers parsed during mode init */
+ gen_chan_info = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ chan_pcal_info = &gen_chan_info[i].rf5112_info;
+
+ /* Power values in quarter dB
+ * for the lower xpd gain curve
+ * (0 dBm -> higher output power) */
+ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff);
+ chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff);
+ }
+
+ /* PCDAC steps
+ * corresponding to the above power
+ * measurements */
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pcdac_x0[1] = (val & 0x1f);
+ chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f);
+ chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f);
+
+ /* Power values in quarter dB
+ * for the higher xpd gain curve
+ * (18 dBm -> lower output power) */
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff);
+ chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff);
+
+ AR5K_EEPROM_READ(offset++, val);
+ chan_pcal_info->pwr_x3[2] = (val & 0xff);
+
+ /* PCDAC steps
+ * corresponding to the above power
+ * measurements (fixed) */
+ chan_pcal_info->pcdac_x3[0] = 20;
+ chan_pcal_info->pcdac_x3[1] = 35;
+ chan_pcal_info->pcdac_x3[2] = 63;
+
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) {
+ chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f);
+
+ /* Last xpd0 power level is also channel maximum */
+ gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3];
+ } else {
+ chan_pcal_info->pcdac_x0[0] = 1;
+ gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff);
+ }
+
+ }
+
+ return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info);
+}
+
+
+/*
+ * Read power calibration for RF2413 chips
+ *
+ * For RF2413 we have a Power to PDDAC table (Power Detector)
+ * instead of a PCDAC and 4 pd gain curves for each calibrated channel.
+ * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y
+ * axis and looks like an exponential function like the RF5111 curve.
+ *
+ * To recreate the curves we read here the points and interpolate
+ * later. Note that in most cases only 2 (higher and lower) curves are
+ * used (like RF5112) but vendors have the oportunity to include all
+ * 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ */
+
+/* For RF2413 power calibration data doesn't start on a fixed location and
+ * if a mode is not supported, it's section is missing -not zeroed-.
+ * So we need to calculate the starting offset for each section by using
+ * these two functions */
+
+/* Return the size of each section based on the mode and the number of pd
+ * gains available (maximum 4). */
+static inline unsigned int
+ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode)
+{
+ static const unsigned int pdgains_size[] = { 4, 6, 9, 12 };
+ unsigned int sz;
+
+ sz = pdgains_size[ee->ee_pd_gains[mode] - 1];
+ sz *= ee->ee_n_piers[mode];
+
+ return sz;
+}
+
+/* Return the starting offset for a section based on the modes supported
+ * and each section's size. */
+static unsigned int
+ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
+{
+ u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4);
+
+ switch(mode) {
+ case AR5K_EEPROM_MODE_11G:
+ if (AR5K_EEPROM_HDR_11B(ee->ee_header))
+ offset += ath5k_pdgains_size_2413(ee,
+ AR5K_EEPROM_MODE_11B) +
+ AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ /* fall through */
+ case AR5K_EEPROM_MODE_11B:
+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
+ offset += ath5k_pdgains_size_2413(ee,
+ AR5K_EEPROM_MODE_11A) +
+ AR5K_EEPROM_N_5GHZ_CHAN / 2;
+ /* fall through */
+ case AR5K_EEPROM_MODE_11A:
+ break;
+ default:
+ break;
+ }
+
+ return offset;
+}
+
+/* Convert RF2413 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
+ struct ath5k_chan_pcal_info *chinfo)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ unsigned int pier, pdg, point;
+
+ /* Fill raw data for each calibration pier */
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+ pcinfo = &chinfo[pier].rf2413_info;
+
+ /* Allocate pd_curves for this cal pier */
+ chinfo[pier].pd_curves =
+ kcalloc(AR5K_EEPROM_N_PD_CURVES,
+ sizeof(struct ath5k_pdgain_info),
+ GFP_KERNEL);
+
+ if (!chinfo[pier].pd_curves)
+ return -ENOMEM;
+
+ /* Fill pd_curves */
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+ u8 idx = pdgain_idx[pdg];
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[idx];
+
+ /* One more point for the highest power
+ * curve (lowest gain) */
+ if (pdg == ee->ee_pd_gains[mode] - 1)
+ pd->pd_points = AR5K_EEPROM_N_PD_POINTS;
+ else
+ pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1;
+
+ /* Allocate pd points for this curve */
+ pd->pd_step = kcalloc(pd->pd_points,
+ sizeof(u8), GFP_KERNEL);
+
+ if (!pd->pd_step)
+ return -ENOMEM;
+
+ pd->pd_pwr = kcalloc(pd->pd_points,
+ sizeof(s16), GFP_KERNEL);
+
+ if (!pd->pd_pwr)
+ return -ENOMEM;
+
+ /* Fill raw dataset
+ * convert all pwr levels to
+ * quarter dB for RF5112 combatibility */
+ pd->pd_step[0] = pcinfo->pddac_i[pdg];
+ pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg];
+
+ for (point = 1; point < pd->pd_points; point++) {
+
+ pd->pd_pwr[point] = pd->pd_pwr[point - 1] +
+ 2 * pcinfo->pwr[pdg][point - 1];
+
+ pd->pd_step[point] = pd->pd_step[point - 1] +
+ pcinfo->pddac[pdg][point - 1];
+
+ }
+
+ /* Highest gain curve -> min power */
+ if (pdg == 0)
+ chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+ /* Lowest gain curve -> max power */
+ if (pdg == ee->ee_pd_gains[mode] - 1)
+ chinfo[pier].max_pwr =
+ pd->pd_pwr[pd->pd_points - 1];
+ }
+ }
+
+ return 0;
+}
+
+/* Parse EEPROM data */
+static int
+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+ struct ath5k_chan_pcal_info *chinfo;
+ u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+ u32 offset;
+ int idx, i, ret;
+ u16 val;
+ u8 pd_gains = 0;
+
+ /* Count how many curves we have and
+ * identify them (which one of the 4
+ * available curves we have on each count).
+ * Curves are stored from higher to
+ * lower gain so we go backwards */
+ for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) {
+ /* ee_x_gain[mode] is x gain mask */
+ if ((ee->ee_x_gain[mode] >> idx) & 0x1)
+ pdgain_idx[pd_gains++] = idx;
+
+ }
+ ee->ee_pd_gains[mode] = pd_gains;
+
+ if (pd_gains == 0)
+ return -EINVAL;
+
+ offset = ath5k_cal_data_offset_2413(ee, mode);
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11a_pcal_freq(ah, offset);
+ offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
+ chinfo = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ chinfo = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+
+ ath5k_eeprom_init_11bg_2413(ah, mode, offset);
+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+ chinfo = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ee->ee_n_piers[mode]; i++) {
+ pcinfo = &chinfo[i].rf2413_info;
+
+ /*
+ * Read pwr_i, pddac_i and the first
+ * 2 pd points (pwr, pddac)
+ */
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr_i[0] = val & 0x1f;
+ pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
+ pcinfo->pwr[0][0] = (val >> 12) & 0xf;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[0][0] = val & 0x3f;
+ pcinfo->pwr[0][1] = (val >> 6) & 0xf;
+ pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[0][2] = val & 0xf;
+ pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
+
+ pcinfo->pwr[0][3] = 0;
+ pcinfo->pddac[0][3] = 0;
+
+ if (pd_gains > 1) {
+ /*
+ * Pd gain 0 is not the last pd gain
+ * so it only has 2 pd points.
+ * Continue wih pd gain 1.
+ */
+ pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
+
+ pcinfo->pddac_i[1] = (val >> 15) & 0x1;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
+
+ pcinfo->pwr[1][0] = (val >> 6) & 0xf;
+ pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[1][1] = val & 0xf;
+ pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
+ pcinfo->pwr[1][2] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[1][2] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[1][2] |= (val & 0xF) << 2;
+
+ pcinfo->pwr[1][3] = 0;
+ pcinfo->pddac[1][3] = 0;
+ } else if (pd_gains == 1) {
+ /*
+ * Pd gain 0 is the last one so
+ * read the extra point.
+ */
+ pcinfo->pwr[0][3] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[0][3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[0][3] |= (val & 0xF) << 2;
+ }
+
+ /*
+ * Proceed with the other pd_gains
+ * as above.
+ */
+ if (pd_gains > 2) {
+ pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
+ pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[2][0] = (val >> 0) & 0xf;
+ pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
+ pcinfo->pwr[2][1] = (val >> 10) & 0xf;
+
+ pcinfo->pddac[2][1] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[2][1] |= (val & 0xF) << 2;
+
+ pcinfo->pwr[2][2] = (val >> 4) & 0xf;
+ pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
+
+ pcinfo->pwr[2][3] = 0;
+ pcinfo->pddac[2][3] = 0;
+ } else if (pd_gains == 2) {
+ pcinfo->pwr[1][3] = (val >> 4) & 0xf;
+ pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
+ }
+
+ if (pd_gains > 3) {
+ pcinfo->pwr_i[3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
+
+ pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
+ pcinfo->pwr[3][0] = (val >> 10) & 0xf;
+ pcinfo->pddac[3][0] = (val >> 14) & 0x3;
+
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[3][0] |= (val & 0xF) << 2;
+ pcinfo->pwr[3][1] = (val >> 4) & 0xf;
+ pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
+
+ pcinfo->pwr[3][2] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
+
+ pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
+ pcinfo->pwr[3][3] = (val >> 8) & 0xf;
+
+ pcinfo->pddac[3][3] = (val >> 12) & 0xF;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
+ } else if (pd_gains == 3) {
+ pcinfo->pwr[2][3] = (val >> 14) & 0x3;
+ AR5K_EEPROM_READ(offset++, val);
+ pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
+
+ pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
+ }
+ }
+
+ return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo);
+}
+
+
+/*
+ * Read per rate target power (this is the maximum tx power
+ * supported by the card). This info is used when setting
+ * tx power, no matter the channel.
+ *
+ * This also works for v5 EEPROMs.
+ */
+static int
+ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_rate_pcal_info *rate_pcal_info;
+ u8 *rate_target_pwr_num;
+ u32 offset;
+ u16 val;
+ int ret, i;
+
+ offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1);
+ rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode];
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_a;
+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_b;
+ ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version);
+ rate_pcal_info = ee->ee_rate_tpwr_g;
+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Different freq mask for older eeproms (<= v3.2) */
+ if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) {
+ for (i = 0; i < (*rate_target_pwr_num); i++) {
+ AR5K_EEPROM_READ(offset++, val);
+ rate_pcal_info[i].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode);
+
+ rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f);
+ rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+
+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+ val == 0) {
+ (*rate_target_pwr_num) = i;
+ break;
+ }
+
+ rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7);
+ rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f);
+ rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f);
+ }
+ } else {
+ for (i = 0; i < (*rate_target_pwr_num); i++) {
+ AR5K_EEPROM_READ(offset++, val);
+ rate_pcal_info[i].freq =
+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+
+ rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f);
+ rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f;
+
+ AR5K_EEPROM_READ(offset++, val);
+
+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+ val == 0) {
+ (*rate_target_pwr_num) = i;
+ break;
+ }
+
+ rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf;
+ rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f);
+ rate_pcal_info[i].target_power_54 = (val & 0x3f);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Read per channel calibration info from EEPROM
+ *
+ * This info is used to calibrate the baseband power table. Imagine
+ * that for each channel there is a power curve that's hw specific
+ * (depends on amplifier etc) and we try to "correct" this curve using
+ * offests we pass on to phy chip (baseband -> before amplifier) so that
+ * it can use accurate power values when setting tx power (takes amplifier's
+ * performance on each channel into account).
+ *
+ * EEPROM provides us with the offsets for some pre-calibrated channels
+ * and we have to interpolate to create the full table for these channels and
+ * also the table for any channel.
+ */
+static int
+ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ int (*read_pcal)(struct ath5k_hw *hw, int mode);
+ int mode;
+ int err;
+
+ if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) &&
+ (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1))
+ read_pcal = ath5k_eeprom_read_pcal_info_5112;
+ else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) &&
+ (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2))
+ read_pcal = ath5k_eeprom_read_pcal_info_2413;
+ else
+ read_pcal = ath5k_eeprom_read_pcal_info_5111;
+
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G;
+ mode++) {
+ err = read_pcal(ah, mode);
+ if (err)
+ return err;
+
+ err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int
+ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *chinfo;
+ u8 pier, pdg;
+
+ switch (mode) {
+ case AR5K_EEPROM_MODE_11A:
+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_a;
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_b;
+ break;
+ case AR5K_EEPROM_MODE_11G:
+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+ return 0;
+ chinfo = ee->ee_pwr_cal_g;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+ if (!chinfo[pier].pd_curves)
+ continue;
+
+ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+ struct ath5k_pdgain_info *pd =
+ &chinfo[pier].pd_curves[pdg];
+
+ if (pd != NULL) {
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
+ }
+ }
+
+ kfree(chinfo[pier].pd_curves);
+ }
+
+ return 0;
+}
+
+void
+ath5k_eeprom_detach(struct ath5k_hw *ah)
+{
+ u8 mode;
+
+ for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
+ ath5k_eeprom_free_pcal_info(ah, mode);
+}
+
+/* Read conformance test limits used for regulatory control */
+static int
+ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_edge_power *rep;
+ unsigned int fmask, pmask;
+ unsigned int ctl_mode;
+ int ret, i, j;
+ u32 offset;
+ u16 val;
+
+ pmask = AR5K_EEPROM_POWER_M;
+ fmask = AR5K_EEPROM_FREQ_M(ee->ee_version);
+ offset = AR5K_EEPROM_CTL(ee->ee_version);
+ ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version);
+ for (i = 0; i < ee->ee_ctls; i += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ ee->ee_ctl[i] = (val >> 8) & 0xff;
+ ee->ee_ctl[i + 1] = val & 0xff;
+ }
+
+ offset = AR5K_EEPROM_GROUP8_OFFSET;
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0)
+ offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) -
+ AR5K_EEPROM_GROUP5_OFFSET;
+ else
+ offset += AR5K_EEPROM_GROUPS_START(ee->ee_version);
+
+ rep = ee->ee_ctl_pwr;
+ for(i = 0; i < ee->ee_ctls; i++) {
+ switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) {
+ case AR5K_CTL_11A:
+ case AR5K_CTL_TURBO:
+ ctl_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ ctl_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ }
+ if (ee->ee_ctl[i] == 0) {
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3)
+ offset += 8;
+ else
+ offset += 7;
+ rep += AR5K_EEPROM_N_EDGES;
+ continue;
+ }
+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[j].freq = (val >> 8) & fmask;
+ rep[j + 1].freq = val & fmask;
+ }
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[j].edge = (val >> 8) & pmask;
+ rep[j].flag = (val >> 14) & 1;
+ rep[j + 1].edge = val & pmask;
+ rep[j + 1].flag = (val >> 6) & 1;
+ }
+ } else {
+ AR5K_EEPROM_READ(offset++, val);
+ rep[0].freq = (val >> 9) & fmask;
+ rep[1].freq = (val >> 2) & fmask;
+ rep[2].freq = (val << 5) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[2].freq |= (val >> 11) & 0x1f;
+ rep[3].freq = (val >> 4) & fmask;
+ rep[4].freq = (val << 3) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[4].freq |= (val >> 13) & 0x7;
+ rep[5].freq = (val >> 6) & fmask;
+ rep[6].freq = (val << 1) & fmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[6].freq |= (val >> 15) & 0x1;
+ rep[7].freq = (val >> 8) & fmask;
+
+ rep[0].edge = (val >> 2) & pmask;
+ rep[1].edge = (val << 4) & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[1].edge |= (val >> 12) & 0xf;
+ rep[2].edge = (val >> 6) & pmask;
+ rep[3].edge = val & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[4].edge = (val >> 10) & pmask;
+ rep[5].edge = (val >> 4) & pmask;
+ rep[6].edge = (val << 2) & pmask;
+
+ AR5K_EEPROM_READ(offset++, val);
+ rep[6].edge |= (val >> 14) & 0x3;
+ rep[7].edge = (val >> 8) & pmask;
+ }
+ for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) {
+ rep[j].freq = ath5k_eeprom_bin2freq(ee,
+ rep[j].freq, ctl_mode);
+ }
+ rep += AR5K_EEPROM_N_EDGES;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Initialize eeprom power tables
+ */
+int
+ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+ int err;
+
+ err = ath5k_eeprom_init_header(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_init_modes(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_read_pcal_info(ah);
+ if (err < 0)
+ return err;
+
+ err = ath5k_eeprom_read_ctl_info(ah);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/*
+ * Read the MAC address from eeprom
+ */
+int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ u8 mac_d[ETH_ALEN] = {};
+ u32 total, offset;
+ u16 data;
+ int octet, ret;
+
+ ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+ if (ret)
+ return ret;
+
+ for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+ ret = ath5k_hw_eeprom_read(ah, offset, &data);
+ if (ret)
+ return ret;
+
+ total += data;
+ mac_d[octet + 1] = data & 0xff;
+ mac_d[octet] = data >> 8;
+ octet += 2;
+ }
+
+ if (!total || total == 3 * 0xffff)
+ return -EINVAL;
+
+ memcpy(mac, mac_d, ETH_ALEN);
+
+ return 0;
+}
+
+bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
+{
+ u16 data;
+
+ ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data);
+
+ if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data)
+ return true;
+ else
+ return false;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
new file mode 100644
index 000000000000..b0c0606dea0b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -0,0 +1,441 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
+#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
+#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */
+#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
+
+#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */
+#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
+#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM 0xffff
+#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */
+#define AR5K_EEPROM_VERSION_4_4 0x4004
+#define AR5K_EEPROM_VERSION_4_5 0x4005
+#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */
+#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */
+#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */
+#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */
+#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */
+
+#define AR5K_EEPROM_MODE_11A 0
+#define AR5K_EEPROM_MODE_11B 1
+#define AR5K_EEPROM_MODE_11G 2
+
+#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
+#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S 1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff))
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4)
+#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1)
+#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1)
+#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
+
+#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5)
+#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1)
+
+#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6)
+#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff)
+#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff)
+
+#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7)
+#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f)
+#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff)
+
+#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8)
+#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff)
+#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3)
+#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3)
+
+#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9)
+#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1)
+#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1)
+#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1)
+#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1)
+#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf)
+#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1)
+#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf)
+
+#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10)
+#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x8)
+#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x8)
+#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1)
+#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1)
+#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1)
+#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 9) & 0x1)
+#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 10) & 0x1)
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
+#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */
+#define AR5K_EEPROM_GROUP1_OFFSET 0x0
+#define AR5K_EEPROM_GROUP2_OFFSET 0x5
+#define AR5K_EEPROM_GROUP3_OFFSET 0x37
+#define AR5K_EEPROM_GROUP4_OFFSET 0x46
+#define AR5K_EEPROM_GROUP5_OFFSET 0x55
+#define AR5K_EEPROM_GROUP6_OFFSET 0x65
+#define AR5K_EEPROM_GROUP7_OFFSET 0x69
+#define AR5K_EEPROM_GROUP8_OFFSET 0x6f
+
+#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP5_OFFSET, 0x0000)
+#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP6_OFFSET, 0x0010)
+#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \
+ AR5K_EEPROM_GROUP7_OFFSET, 0x0014)
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
+
+#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE 100
+#define AR5K_EEPROM_EEP_DELTA 10
+#define AR5K_EEPROM_N_MODES 3
+#define AR5K_EEPROM_N_5GHZ_CHAN 10
+#define AR5K_EEPROM_N_2GHZ_CHAN 3
+#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4
+#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4
+#define AR5K_EEPROM_MAX_CHAN 10
+#define AR5K_EEPROM_N_PWR_POINTS_5111 11
+#define AR5K_EEPROM_N_PCDAC 11
+#define AR5K_EEPROM_N_PHASE_CAL 5
+#define AR5K_EEPROM_N_TEST_FREQ 8
+#define AR5K_EEPROM_N_EDGES 8
+#define AR5K_EEPROM_N_INTERCEPTS 11
+#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M 0x3f
+#define AR5K_EEPROM_PCDAC_START 1
+#define AR5K_EEPROM_PCDAC_STOP 63
+#define AR5K_EEPROM_PCDAC_STEP 1
+#define AR5K_EEPROM_NON_EDGE_M 0x40
+#define AR5K_EEPROM_CHANNEL_POWER 8
+#define AR5K_EEPROM_N_OBDB 4
+#define AR5K_EEPROM_OBDB_DIS 0xffff
+#define AR5K_EEPROM_CHANNEL_DIS 0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS 32
+#define AR5K_EEPROM_N_PD_CURVES 4
+#define AR5K_EEPROM_N_XPD0_POINTS 4
+#define AR5K_EEPROM_N_XPD3_POINTS 3
+#define AR5K_EEPROM_N_PD_GAINS 4
+#define AR5K_EEPROM_N_PD_POINTS 5
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
+#define AR5K_EEPROM_POWER_M 0x3f
+#define AR5K_EEPROM_POWER_MIN 0
+#define AR5K_EEPROM_POWER_MAX 3150
+#define AR5K_EEPROM_POWER_STEP 50
+#define AR5K_EEPROM_POWER_TABLE_SIZE 64
+#define AR5K_EEPROM_N_POWER_LOC_11B 4
+#define AR5K_EEPROM_N_POWER_LOC_11G 6
+#define AR5K_EEPROM_I_GAIN 10
+#define AR5K_EEPROM_CCK_OFDM_DELTA 15
+#define AR5K_EEPROM_N_IQ_CAL 2
+
+#define AR5K_EEPROM_READ(_o, _v) do { \
+ ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \
+ if (ret) \
+ return ret; \
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v) \
+ AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \
+
+enum ath5k_ant_setting {
+ AR5K_ANT_VARIABLE = 0, /* variable by programming */
+ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
+ AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */
+ AR5K_ANT_MAX = 3,
+};
+
+enum ath5k_ctl_mode {
+ AR5K_CTL_11A = 0,
+ AR5K_CTL_11B = 1,
+ AR5K_CTL_11G = 2,
+ AR5K_CTL_TURBO = 3,
+ AR5K_CTL_TURBOG = 4,
+ AR5K_CTL_2GHT20 = 5,
+ AR5K_CTL_5GHT20 = 6,
+ AR5K_CTL_2GHT40 = 7,
+ AR5K_CTL_5GHT40 = 8,
+ AR5K_CTL_MODE_M = 15,
+};
+
+/* Default CTL ids for the 3 main reg domains.
+ * Atheros only uses these by default but vendors
+ * can have up to 32 different CTLs for different
+ * scenarios. Note that theese values are ORed with
+ * the mode id (above) so we can have up to 24 CTL
+ * datasets out of these 3 main regdomains. That leaves
+ * 8 ids that can be used by vendors and since 0x20 is
+ * missing from HAL sources i guess this is the set of
+ * custom CTLs vendors can use. */
+#define AR5K_CTL_FCC 0x10
+#define AR5K_CTL_CUSTOM 0x20
+#define AR5K_CTL_ETSI 0x30
+#define AR5K_CTL_MKK 0x40
+
+/* Indicates a CTL with only mode set and
+ * no reg domain mapping, such CTLs are used
+ * for world roaming domains or simply when
+ * a reg domain is not set */
+#define AR5K_CTL_NO_REGDOMAIN 0xf0
+
+/* Indicates an empty (invalid) CTL */
+#define AR5K_CTL_NO_CTL 0xff
+
+/* Per channel calibration data, used for power table setup */
+struct ath5k_chan_pcal_info_rf5111 {
+ /* Power levels in half dbm units
+ * for one power curve. */
+ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
+ /* PCDAC table steps
+ * for the above values */
+ u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
+ /* Starting PCDAC step */
+ u8 pcdac_min;
+ /* Final PCDAC step */
+ u8 pcdac_max;
+};
+
+struct ath5k_chan_pcal_info_rf5112 {
+ /* Power levels in quarter dBm units
+ * for lower (0) and higher (3)
+ * level curves in 0.25dB units */
+ s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
+ /* PCDAC table steps
+ * for the above values */
+ u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
+};
+
+struct ath5k_chan_pcal_info_rf2413 {
+ /* Starting pwr/pddac values */
+ s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
+ u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
+ /* (pwr,pddac) points
+ * power levels in 0.5dB units */
+ s8 pwr[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+ u8 pddac[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+};
+
+enum ath5k_powertable_type {
+ AR5K_PWRTABLE_PWR_TO_PCDAC = 0,
+ AR5K_PWRTABLE_LINEAR_PCDAC = 1,
+ AR5K_PWRTABLE_PWR_TO_PDADC = 2,
+};
+
+struct ath5k_pdgain_info {
+ u8 pd_points;
+ u8 *pd_step;
+ /* Power values are in
+ * 0.25dB units */
+ s16 *pd_pwr;
+};
+
+struct ath5k_chan_pcal_info {
+ /* Frequency */
+ u16 freq;
+ /* Tx power boundaries */
+ s16 max_pwr;
+ s16 min_pwr;
+ union {
+ struct ath5k_chan_pcal_info_rf5111 rf5111_info;
+ struct ath5k_chan_pcal_info_rf5112 rf5112_info;
+ struct ath5k_chan_pcal_info_rf2413 rf2413_info;
+ };
+ /* Raw values used by phy code
+ * Curves are stored in order from lower
+ * gain to higher gain (max txpower -> min txpower) */
+ struct ath5k_pdgain_info *pd_curves;
+};
+
+/* Per rate calibration data for each mode,
+ * used for rate power table setup.
+ * Note: Values in 0.5dB units */
+struct ath5k_rate_pcal_info {
+ u16 freq; /* Frequency */
+ /* Power level for 6-24Mbit/s rates or
+ * 1Mb rate */
+ u16 target_power_6to24;
+ /* Power level for 36Mbit rate or
+ * 2Mb rate */
+ u16 target_power_36;
+ /* Power level for 48Mbit rate or
+ * 5.5Mbit rate */
+ u16 target_power_48;
+ /* Power level for 54Mbit rate or
+ * 11Mbit rate */
+ u16 target_power_54;
+};
+
+/* Power edges for conformance test limits */
+struct ath5k_edge_power {
+ u16 freq;
+ u16 edge; /* in half dBm */
+ bool flag;
+};
+
+/* EEPROM calibration data */
+struct ath5k_eeprom_info {
+
+ /* Header information */
+ u16 ee_magic;
+ u16 ee_protect;
+ u16 ee_regdomain;
+ u16 ee_version;
+ u16 ee_header;
+ u16 ee_ant_gain;
+ u16 ee_misc0;
+ u16 ee_misc1;
+ u16 ee_misc2;
+ u16 ee_misc3;
+ u16 ee_misc4;
+ u16 ee_misc5;
+ u16 ee_misc6;
+ u16 ee_cck_ofdm_gain_delta;
+ u16 ee_cck_ofdm_power_delta;
+ u16 ee_scaled_cck_delta;
+
+ /* RF Calibration settings (reset, rfregs) */
+ u16 ee_i_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_q_cal[AR5K_EEPROM_N_MODES];
+ u16 ee_fixed_bias[AR5K_EEPROM_N_MODES];
+ u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+ u16 ee_xr_power[AR5K_EEPROM_N_MODES];
+ u16 ee_switch_settling[AR5K_EEPROM_N_MODES];
+ u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES];
+ u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+ u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+ u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+ u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+ u16 ee_thr_62[AR5K_EEPROM_N_MODES];
+ u16 ee_xlna_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_xpd[AR5K_EEPROM_N_MODES];
+ u16 ee_x_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_i_gain[AR5K_EEPROM_N_MODES];
+ u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+ u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES];
+ u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES];
+ u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES];
+
+ /* Power calibration data */
+ u16 ee_false_detect[AR5K_EEPROM_N_MODES];
+
+ /* Number of pd gain curves per mode */
+ u8 ee_pd_gains[AR5K_EEPROM_N_MODES];
+ /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */
+ u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS];
+
+ u8 ee_n_piers[AR5K_EEPROM_N_MODES];
+ struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
+ struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+
+ /* Per rate target power levels */
+ u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+
+ /* Conformance test limits (Unused) */
+ u8 ee_ctls;
+ u8 ee_ctl[AR5K_EEPROM_MAX_CTLS];
+ struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS];
+
+ /* Noise Floor Calibration settings */
+ s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+ s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+ s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+ s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES];
+ s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES];
+ s8 ee_pd_gain_overlap;
+
+ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+};
+
diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
new file mode 100644
index 000000000000..64a27e73d02e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************\
+ GPIO Functions
+\****************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+ u32 led;
+ /*5210 has different led mode handling*/
+ u32 led_5210;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*Reset led status*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+ /*
+ * Some blinking values, define at your wish
+ */
+ switch (state) {
+ case AR5K_LED_SCAN:
+ case AR5K_LED_AUTH:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+ led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+ break;
+
+ case AR5K_LED_INIT:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+
+ case AR5K_LED_ASSOC:
+ case AR5K_LED_RUN:
+ led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+ led_5210 = AR5K_PCICFG_LED_ASSOC;
+ break;
+
+ default:
+ led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+ led_5210 = AR5K_PCICFG_LED_PEND;
+ break;
+ }
+
+ /*Write new status to the register*/
+ if (ah->ah_version != AR5K_AR5210)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/*
+ * Set GPIO inputs
+ */
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/*
+ * Set GPIO outputs
+ */
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ ath5k_hw_reg_write(ah,
+ (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+ | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+ return 0;
+}
+
+/*
+ * Get GPIO state
+ */
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio >= AR5K_NUM_GPIO)
+ return 0xffffffff;
+
+ /* GPIO input magic */
+ return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+ 0x1;
+}
+
+/*
+ * Set GPIO state
+ */
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+ u32 data;
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (gpio >= AR5K_NUM_GPIO)
+ return -EINVAL;
+
+ /* GPIO output magic */
+ data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ data &= ~(1 << gpio);
+ data |= (val & 1) << gpio;
+
+ ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+ return 0;
+}
+
+/*
+ * Initialize the GPIO interrupt (RFKill switch)
+ */
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+ u32 interrupt_level)
+{
+ u32 data;
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (gpio >= AR5K_NUM_GPIO)
+ return;
+
+ /*
+ * Set the GPIO interrupt
+ */
+ data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+ ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+ AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+ (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+ ath5k_hw_reg_write(ah, interrupt_level ? data :
+ (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+ ah->ah_imr |= AR5K_IMR_GPIO;
+
+ /* Enable GPIO interrupts */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
new file mode 100644
index 000000000000..61fb621ed20d
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -0,0 +1,1557 @@
+/*
+ * Initial register settings functions
+ *
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Mode-independent initial register writes
+ */
+
+struct ath5k_ini {
+ u16 ini_register;
+ u32 ini_value;
+
+ enum {
+ AR5K_INI_WRITE = 0, /* Default */
+ AR5K_INI_READ = 1, /* Cleared on read */
+ } ini_mode;
+};
+
+/*
+ * Mode specific initial register values
+ */
+
+struct ath5k_ini_mode {
+ u16 mode_register;
+ u32 mode_value[5];
+};
+
+/* Initial register settings for AR5210 */
+static const struct ath5k_ini ar5210_ini[] = {
+ /* PCU and MAC registers */
+ { AR5K_NOQCU_TXDP0, 0 },
+ { AR5K_NOQCU_TXDP1, 0 },
+ { AR5K_RXDP, 0 },
+ { AR5K_CR, 0 },
+ { AR5K_ISR, 0, AR5K_INI_READ },
+ { AR5K_IMR, 0 },
+ { AR5K_IER, AR5K_IER_DISABLE },
+ { AR5K_BSR, 0, AR5K_INI_READ },
+ { AR5K_TXCFG, AR5K_DMASIZE_128B },
+ { AR5K_RXCFG, AR5K_DMASIZE_128B },
+ { AR5K_CFG, AR5K_INIT_CFG },
+ { AR5K_TOPS, 8 },
+ { AR5K_RXNOFRM, 8 },
+ { AR5K_RPGTO, 0 },
+ { AR5K_TXNOFRM, 0 },
+ { AR5K_SFR, 0 },
+ { AR5K_MIBC, 0 },
+ { AR5K_MISC, 0 },
+ { AR5K_RX_FILTER_5210, 0 },
+ { AR5K_MCAST_FILTER0_5210, 0 },
+ { AR5K_MCAST_FILTER1_5210, 0 },
+ { AR5K_TX_MASK0, 0 },
+ { AR5K_TX_MASK1, 0 },
+ { AR5K_CLR_TMASK, 0 },
+ { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES },
+ { AR5K_DIAG_SW_5210, 0 },
+ { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES },
+ { AR5K_TSF_L32_5210, 0 },
+ { AR5K_TIMER0_5210, 0 },
+ { AR5K_TIMER1_5210, 0xffffffff },
+ { AR5K_TIMER2_5210, 0xffffffff },
+ { AR5K_TIMER3_5210, 1 },
+ { AR5K_CFP_DUR_5210, 0 },
+ { AR5K_CFP_PERIOD_5210, 0 },
+ /* PHY registers */
+ { AR5K_PHY(0), 0x00000047 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY(3), 0x09848ea6 },
+ { AR5K_PHY(4), 0x3d32e000 },
+ { AR5K_PHY(5), 0x0000076b },
+ { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE },
+ { AR5K_PHY(8), 0x02020200 },
+ { AR5K_PHY(9), 0x00000e0e },
+ { AR5K_PHY(10), 0x0a020201 },
+ { AR5K_PHY(11), 0x00036ffc },
+ { AR5K_PHY(12), 0x00000000 },
+ { AR5K_PHY(13), 0x00000e0e },
+ { AR5K_PHY(14), 0x00000007 },
+ { AR5K_PHY(15), 0x00020100 },
+ { AR5K_PHY(16), 0x89630000 },
+ { AR5K_PHY(17), 0x1372169c },
+ { AR5K_PHY(18), 0x0018b633 },
+ { AR5K_PHY(19), 0x1284613c },
+ { AR5K_PHY(20), 0x0de8b8e0 },
+ { AR5K_PHY(21), 0x00074859 },
+ { AR5K_PHY(22), 0x7e80beba },
+ { AR5K_PHY(23), 0x313a665e },
+ { AR5K_PHY_AGCCTL, 0x00001d08 },
+ { AR5K_PHY(25), 0x0001ce00 },
+ { AR5K_PHY(26), 0x409a4190 },
+ { AR5K_PHY(28), 0x0000000f },
+ { AR5K_PHY(29), 0x00000080 },
+ { AR5K_PHY(30), 0x00000004 },
+ { AR5K_PHY(31), 0x00000018 }, /* 0x987c */
+ { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */
+ { AR5K_PHY(65), 0x00000000 },
+ { AR5K_PHY(66), 0x00000000 },
+ { AR5K_PHY(67), 0x00800000 },
+ { AR5K_PHY(68), 0x00000003 },
+ /* BB gain table (64bytes) */
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000020 },
+ { AR5K_BB_GAIN(2), 0x00000010 },
+ { AR5K_BB_GAIN(3), 0x00000030 },
+ { AR5K_BB_GAIN(4), 0x00000008 },
+ { AR5K_BB_GAIN(5), 0x00000028 },
+ { AR5K_BB_GAIN(6), 0x00000028 },
+ { AR5K_BB_GAIN(7), 0x00000004 },
+ { AR5K_BB_GAIN(8), 0x00000024 },
+ { AR5K_BB_GAIN(9), 0x00000014 },
+ { AR5K_BB_GAIN(10), 0x00000034 },
+ { AR5K_BB_GAIN(11), 0x0000000c },
+ { AR5K_BB_GAIN(12), 0x0000002c },
+ { AR5K_BB_GAIN(13), 0x00000002 },
+ { AR5K_BB_GAIN(14), 0x00000022 },
+ { AR5K_BB_GAIN(15), 0x00000012 },
+ { AR5K_BB_GAIN(16), 0x00000032 },
+ { AR5K_BB_GAIN(17), 0x0000000a },
+ { AR5K_BB_GAIN(18), 0x0000002a },
+ { AR5K_BB_GAIN(19), 0x00000001 },
+ { AR5K_BB_GAIN(20), 0x00000021 },
+ { AR5K_BB_GAIN(21), 0x00000011 },
+ { AR5K_BB_GAIN(22), 0x00000031 },
+ { AR5K_BB_GAIN(23), 0x00000009 },
+ { AR5K_BB_GAIN(24), 0x00000029 },
+ { AR5K_BB_GAIN(25), 0x00000005 },
+ { AR5K_BB_GAIN(26), 0x00000025 },
+ { AR5K_BB_GAIN(27), 0x00000015 },
+ { AR5K_BB_GAIN(28), 0x00000035 },
+ { AR5K_BB_GAIN(29), 0x0000000d },
+ { AR5K_BB_GAIN(30), 0x0000002d },
+ { AR5K_BB_GAIN(31), 0x00000003 },
+ { AR5K_BB_GAIN(32), 0x00000023 },
+ { AR5K_BB_GAIN(33), 0x00000013 },
+ { AR5K_BB_GAIN(34), 0x00000033 },
+ { AR5K_BB_GAIN(35), 0x0000000b },
+ { AR5K_BB_GAIN(36), 0x0000002b },
+ { AR5K_BB_GAIN(37), 0x00000007 },
+ { AR5K_BB_GAIN(38), 0x00000027 },
+ { AR5K_BB_GAIN(39), 0x00000017 },
+ { AR5K_BB_GAIN(40), 0x00000037 },
+ { AR5K_BB_GAIN(41), 0x0000000f },
+ { AR5K_BB_GAIN(42), 0x0000002f },
+ { AR5K_BB_GAIN(43), 0x0000002f },
+ { AR5K_BB_GAIN(44), 0x0000002f },
+ { AR5K_BB_GAIN(45), 0x0000002f },
+ { AR5K_BB_GAIN(46), 0x0000002f },
+ { AR5K_BB_GAIN(47), 0x0000002f },
+ { AR5K_BB_GAIN(48), 0x0000002f },
+ { AR5K_BB_GAIN(49), 0x0000002f },
+ { AR5K_BB_GAIN(50), 0x0000002f },
+ { AR5K_BB_GAIN(51), 0x0000002f },
+ { AR5K_BB_GAIN(52), 0x0000002f },
+ { AR5K_BB_GAIN(53), 0x0000002f },
+ { AR5K_BB_GAIN(54), 0x0000002f },
+ { AR5K_BB_GAIN(55), 0x0000002f },
+ { AR5K_BB_GAIN(56), 0x0000002f },
+ { AR5K_BB_GAIN(57), 0x0000002f },
+ { AR5K_BB_GAIN(58), 0x0000002f },
+ { AR5K_BB_GAIN(59), 0x0000002f },
+ { AR5K_BB_GAIN(60), 0x0000002f },
+ { AR5K_BB_GAIN(61), 0x0000002f },
+ { AR5K_BB_GAIN(62), 0x0000002f },
+ { AR5K_BB_GAIN(63), 0x0000002f },
+ /* 5110 RF gain table (64btes) */
+ { AR5K_RF_GAIN(0), 0x0000001d },
+ { AR5K_RF_GAIN(1), 0x0000005d },
+ { AR5K_RF_GAIN(2), 0x0000009d },
+ { AR5K_RF_GAIN(3), 0x000000dd },
+ { AR5K_RF_GAIN(4), 0x0000011d },
+ { AR5K_RF_GAIN(5), 0x00000021 },
+ { AR5K_RF_GAIN(6), 0x00000061 },
+ { AR5K_RF_GAIN(7), 0x000000a1 },
+ { AR5K_RF_GAIN(8), 0x000000e1 },
+ { AR5K_RF_GAIN(9), 0x00000031 },
+ { AR5K_RF_GAIN(10), 0x00000071 },
+ { AR5K_RF_GAIN(11), 0x000000b1 },
+ { AR5K_RF_GAIN(12), 0x0000001c },
+ { AR5K_RF_GAIN(13), 0x0000005c },
+ { AR5K_RF_GAIN(14), 0x00000029 },
+ { AR5K_RF_GAIN(15), 0x00000069 },
+ { AR5K_RF_GAIN(16), 0x000000a9 },
+ { AR5K_RF_GAIN(17), 0x00000020 },
+ { AR5K_RF_GAIN(18), 0x00000019 },
+ { AR5K_RF_GAIN(19), 0x00000059 },
+ { AR5K_RF_GAIN(20), 0x00000099 },
+ { AR5K_RF_GAIN(21), 0x00000030 },
+ { AR5K_RF_GAIN(22), 0x00000005 },
+ { AR5K_RF_GAIN(23), 0x00000025 },
+ { AR5K_RF_GAIN(24), 0x00000065 },
+ { AR5K_RF_GAIN(25), 0x000000a5 },
+ { AR5K_RF_GAIN(26), 0x00000028 },
+ { AR5K_RF_GAIN(27), 0x00000068 },
+ { AR5K_RF_GAIN(28), 0x0000001f },
+ { AR5K_RF_GAIN(29), 0x0000001e },
+ { AR5K_RF_GAIN(30), 0x00000018 },
+ { AR5K_RF_GAIN(31), 0x00000058 },
+ { AR5K_RF_GAIN(32), 0x00000098 },
+ { AR5K_RF_GAIN(33), 0x00000003 },
+ { AR5K_RF_GAIN(34), 0x00000004 },
+ { AR5K_RF_GAIN(35), 0x00000044 },
+ { AR5K_RF_GAIN(36), 0x00000084 },
+ { AR5K_RF_GAIN(37), 0x00000013 },
+ { AR5K_RF_GAIN(38), 0x00000012 },
+ { AR5K_RF_GAIN(39), 0x00000052 },
+ { AR5K_RF_GAIN(40), 0x00000092 },
+ { AR5K_RF_GAIN(41), 0x000000d2 },
+ { AR5K_RF_GAIN(42), 0x0000002b },
+ { AR5K_RF_GAIN(43), 0x0000002a },
+ { AR5K_RF_GAIN(44), 0x0000006a },
+ { AR5K_RF_GAIN(45), 0x000000aa },
+ { AR5K_RF_GAIN(46), 0x0000001b },
+ { AR5K_RF_GAIN(47), 0x0000001a },
+ { AR5K_RF_GAIN(48), 0x0000005a },
+ { AR5K_RF_GAIN(49), 0x0000009a },
+ { AR5K_RF_GAIN(50), 0x000000da },
+ { AR5K_RF_GAIN(51), 0x00000006 },
+ { AR5K_RF_GAIN(52), 0x00000006 },
+ { AR5K_RF_GAIN(53), 0x00000006 },
+ { AR5K_RF_GAIN(54), 0x00000006 },
+ { AR5K_RF_GAIN(55), 0x00000006 },
+ { AR5K_RF_GAIN(56), 0x00000006 },
+ { AR5K_RF_GAIN(57), 0x00000006 },
+ { AR5K_RF_GAIN(58), 0x00000006 },
+ { AR5K_RF_GAIN(59), 0x00000006 },
+ { AR5K_RF_GAIN(60), 0x00000006 },
+ { AR5K_RF_GAIN(61), 0x00000006 },
+ { AR5K_RF_GAIN(62), 0x00000006 },
+ { AR5K_RF_GAIN(63), 0x00000006 },
+ /* PHY activation */
+ { AR5K_PHY(53), 0x00000020 },
+ { AR5K_PHY(51), 0x00000004 },
+ { AR5K_PHY(50), 0x00060106 },
+ { AR5K_PHY(39), 0x0000006d },
+ { AR5K_PHY(48), 0x00000000 },
+ { AR5K_PHY(52), 0x00000014 },
+ { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE },
+};
+
+/* Initial register settings for AR5211 */
+static const struct ath5k_ini ar5211_ini[] = {
+ { AR5K_RXDP, 0x00000000 },
+ { AR5K_RTSD0, 0x84849c9c },
+ { AR5K_RTSD1, 0x7c7c7c7c },
+ { AR5K_RXCFG, 0x00000005 },
+ { AR5K_MIBC, 0x00000000 },
+ { AR5K_TOPS, 0x00000008 },
+ { AR5K_RXNOFRM, 0x00000008 },
+ { AR5K_TXNOFRM, 0x00000010 },
+ { AR5K_RPGTO, 0x00000000 },
+ { AR5K_RFCNT, 0x0000001f },
+ { AR5K_QUEUE_TXDP(0), 0x00000000 },
+ { AR5K_QUEUE_TXDP(1), 0x00000000 },
+ { AR5K_QUEUE_TXDP(2), 0x00000000 },
+ { AR5K_QUEUE_TXDP(3), 0x00000000 },
+ { AR5K_QUEUE_TXDP(4), 0x00000000 },
+ { AR5K_QUEUE_TXDP(5), 0x00000000 },
+ { AR5K_QUEUE_TXDP(6), 0x00000000 },
+ { AR5K_QUEUE_TXDP(7), 0x00000000 },
+ { AR5K_QUEUE_TXDP(8), 0x00000000 },
+ { AR5K_QUEUE_TXDP(9), 0x00000000 },
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_STA_ID1, 0x00000000 },
+ { AR5K_BSS_ID0, 0x00000000 },
+ { AR5K_BSS_ID1, 0x00000000 },
+ { AR5K_RSSI_THR, 0x00000000 },
+ { AR5K_CFP_PERIOD_5211, 0x00000000 },
+ { AR5K_TIMER0_5211, 0x00000030 },
+ { AR5K_TIMER1_5211, 0x0007ffff },
+ { AR5K_TIMER2_5211, 0x01ffffff },
+ { AR5K_TIMER3_5211, 0x00000031 },
+ { AR5K_CFP_DUR_5211, 0x00000000 },
+ { AR5K_RX_FILTER_5211, 0x00000000 },
+ { AR5K_MCAST_FILTER0_5211, 0x00000000 },
+ { AR5K_MCAST_FILTER1_5211, 0x00000002 },
+ { AR5K_DIAG_SW_5211, 0x00000000 },
+ { AR5K_ADDAC_TEST, 0x00000000 },
+ { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+ /* PHY registers */
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY(3), 0x2d849093 },
+ { AR5K_PHY(4), 0x7d32e000 },
+ { AR5K_PHY(5), 0x00000f6b },
+ { AR5K_PHY_ACT, 0x00000000 },
+ { AR5K_PHY(11), 0x00026ffe },
+ { AR5K_PHY(12), 0x00000000 },
+ { AR5K_PHY(15), 0x00020100 },
+ { AR5K_PHY(16), 0x206a017a },
+ { AR5K_PHY(19), 0x1284613c },
+ { AR5K_PHY(21), 0x00000859 },
+ { AR5K_PHY(26), 0x409a4190 }, /* 0x9868 */
+ { AR5K_PHY(27), 0x050cb081 },
+ { AR5K_PHY(28), 0x0000000f },
+ { AR5K_PHY(29), 0x00000080 },
+ { AR5K_PHY(30), 0x0000000c },
+ { AR5K_PHY(64), 0x00000000 },
+ { AR5K_PHY(65), 0x00000000 },
+ { AR5K_PHY(66), 0x00000000 },
+ { AR5K_PHY(67), 0x00800000 },
+ { AR5K_PHY(68), 0x00000001 },
+ { AR5K_PHY(71), 0x0000092a },
+ { AR5K_PHY_IQ, 0x00000000 },
+ { AR5K_PHY(73), 0x00058a05 },
+ { AR5K_PHY(74), 0x00000001 },
+ { AR5K_PHY(75), 0x00000000 },
+ { AR5K_PHY_PAPD_PROBE, 0x00000000 },
+ { AR5K_PHY(77), 0x00000000 }, /* 0x9934 */
+ { AR5K_PHY(78), 0x00000000 }, /* 0x9938 */
+ { AR5K_PHY(79), 0x0000003f }, /* 0x993c */
+ { AR5K_PHY(80), 0x00000004 },
+ { AR5K_PHY(82), 0x00000000 },
+ { AR5K_PHY(83), 0x00000000 },
+ { AR5K_PHY(84), 0x00000000 },
+ { AR5K_PHY_RADAR, 0x5d50f14c },
+ { AR5K_PHY(86), 0x00000018 },
+ { AR5K_PHY(87), 0x004b6a8e },
+ /* Initial Power table (32bytes)
+ * common on all cards/modes.
+ * Note: Table is rewritten during
+ * txpower setup later using calibration
+ * data etc. so next write is non-common */
+ { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff },
+ { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff },
+ { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff },
+ { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff },
+ { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff },
+ { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff },
+ { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff },
+ { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff },
+ { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff },
+ { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff },
+ { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff },
+ { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff },
+ { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff },
+ { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff },
+ { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff },
+ { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff },
+ { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff },
+ { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff },
+ { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff },
+ { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff },
+ { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff },
+ { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff },
+ { AR5K_PHY_CCKTXCTL, 0x00000000 },
+ { AR5K_PHY(642), 0x503e4646 },
+ { AR5K_PHY_GAIN_2GHZ, 0x6480416c },
+ { AR5K_PHY(644), 0x0199a003 },
+ { AR5K_PHY(645), 0x044cd610 },
+ { AR5K_PHY(646), 0x13800040 },
+ { AR5K_PHY(647), 0x1be00060 },
+ { AR5K_PHY(648), 0x0c53800a },
+ { AR5K_PHY(649), 0x0014df3b },
+ { AR5K_PHY(650), 0x000001b5 },
+ { AR5K_PHY(651), 0x00000020 },
+};
+
+/* Initial mode-specific settings for AR5211
+ * 5211 supports OFDM-only g (draft g) but we
+ * need to test it !
+ */
+static const struct ath5k_ini_mode ar5211_ini_mode[] = {
+ { AR5K_TXCFG,
+ /* a aTurbo b g (OFDM) */
+ { 0x00000015, 0x00000015, 0x0000001d, 0x00000015 } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+ { AR5K_DCU_GBL_IFS_SLOT,
+ { 0x00000168, 0x000001e0, 0x000001b8, 0x00000168 } },
+ { AR5K_DCU_GBL_IFS_SIFS,
+ { 0x00000230, 0x000001e0, 0x000000b0, 0x00000230 } },
+ { AR5K_DCU_GBL_IFS_EIFS,
+ { 0x00000d98, 0x00001180, 0x00001f48, 0x00000d98 } },
+ { AR5K_DCU_GBL_IFS_MISC,
+ { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000a0e0 } },
+ { AR5K_TIME_OUT,
+ { 0x04000400, 0x08000800, 0x20003000, 0x04000400 } },
+ { AR5K_USEC_5211,
+ { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95, 0x0e8d8fa7 } },
+ { AR5K_PHY_TURBO,
+ { 0x00000000, 0x00000003, 0x00000000, 0x00000000 } },
+ { AR5K_PHY(8),
+ { 0x02020200, 0x02020200, 0x02010200, 0x02020200 } },
+ { AR5K_PHY(9),
+ { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e } },
+ { AR5K_PHY(10),
+ { 0x0a020001, 0x0a020001, 0x05010000, 0x0a020001 } },
+ { AR5K_PHY(13),
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY(14),
+ { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY(17),
+ { 0x1372169c, 0x137216a5, 0x137216a8, 0x1372169c } },
+ { AR5K_PHY(18),
+ { 0x0018ba67, 0x0018ba67, 0x0018ba69, 0x0018ba69 } },
+ { AR5K_PHY(20),
+ { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x31375d5e, 0x31375d5e, 0x313a5d5e, 0x31375d5e } },
+ { AR5K_PHY_AGCCTL,
+ { 0x0000bd10, 0x0000bd10, 0x0000bd38, 0x0000bd10 } },
+ { AR5K_PHY_NF,
+ { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x00002710, 0x00002710, 0x0000157c, 0x00002710 } },
+ { AR5K_PHY(70),
+ { 0x00000190, 0x00000190, 0x00000084, 0x00000190 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0x6fe01020, 0x6fe01020, 0x6fe00920, 0x6fe01020 } },
+ { AR5K_PHY_PCDAC_TXPOWER_BASE,
+ { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } },
+ { AR5K_RF_BUFFER_CONTROL_4,
+ { 0x00000010, 0x00000014, 0x00000010, 0x00000010 } },
+};
+
+/* Initial register settings for AR5212 */
+static const struct ath5k_ini ar5212_ini_common_start[] = {
+ { AR5K_RXDP, 0x00000000 },
+ { AR5K_RXCFG, 0x00000005 },
+ { AR5K_MIBC, 0x00000000 },
+ { AR5K_TOPS, 0x00000008 },
+ { AR5K_RXNOFRM, 0x00000008 },
+ { AR5K_TXNOFRM, 0x00000010 },
+ { AR5K_RPGTO, 0x00000000 },
+ { AR5K_RFCNT, 0x0000001f },
+ { AR5K_QUEUE_TXDP(0), 0x00000000 },
+ { AR5K_QUEUE_TXDP(1), 0x00000000 },
+ { AR5K_QUEUE_TXDP(2), 0x00000000 },
+ { AR5K_QUEUE_TXDP(3), 0x00000000 },
+ { AR5K_QUEUE_TXDP(4), 0x00000000 },
+ { AR5K_QUEUE_TXDP(5), 0x00000000 },
+ { AR5K_QUEUE_TXDP(6), 0x00000000 },
+ { AR5K_QUEUE_TXDP(7), 0x00000000 },
+ { AR5K_QUEUE_TXDP(8), 0x00000000 },
+ { AR5K_QUEUE_TXDP(9), 0x00000000 },
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_DCU_TXP, 0x00000000 },
+ /* Tx filter table 0 (32 entries) */
+ { AR5K_DCU_TX_FILTER_0(0), 0x00000000 }, /* DCU 0 */
+ { AR5K_DCU_TX_FILTER_0(1), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(2), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(3), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(4), 0x00000000 }, /* DCU 1 */
+ { AR5K_DCU_TX_FILTER_0(5), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(6), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(7), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(8), 0x00000000 }, /* DCU 2 */
+ { AR5K_DCU_TX_FILTER_0(9), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(10), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(11), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(12), 0x00000000 }, /* DCU 3 */
+ { AR5K_DCU_TX_FILTER_0(13), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(14), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(15), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(16), 0x00000000 }, /* DCU 4 */
+ { AR5K_DCU_TX_FILTER_0(17), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(18), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(19), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(20), 0x00000000 }, /* DCU 5 */
+ { AR5K_DCU_TX_FILTER_0(21), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(22), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(23), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(24), 0x00000000 }, /* DCU 6 */
+ { AR5K_DCU_TX_FILTER_0(25), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(26), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(27), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(28), 0x00000000 }, /* DCU 7 */
+ { AR5K_DCU_TX_FILTER_0(29), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(30), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_0(31), 0x00000000 },
+ /* Tx filter table 1 (16 entries) */
+ { AR5K_DCU_TX_FILTER_1(0), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(1), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(2), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(3), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(4), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(5), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(6), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(7), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(8), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(9), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(10), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(11), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(12), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(13), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(14), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_1(15), 0x00000000 },
+ { AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
+ { AR5K_DCU_TX_FILTER_SET, 0x00000000 },
+ { AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
+ { AR5K_DCU_TX_FILTER_SET, 0x00000000 },
+ { AR5K_STA_ID1, 0x00000000 },
+ { AR5K_BSS_ID0, 0x00000000 },
+ { AR5K_BSS_ID1, 0x00000000 },
+ { AR5K_BEACON_5211, 0x00000000 },
+ { AR5K_CFP_PERIOD_5211, 0x00000000 },
+ { AR5K_TIMER0_5211, 0x00000030 },
+ { AR5K_TIMER1_5211, 0x0007ffff },
+ { AR5K_TIMER2_5211, 0x01ffffff },
+ { AR5K_TIMER3_5211, 0x00000031 },
+ { AR5K_CFP_DUR_5211, 0x00000000 },
+ { AR5K_RX_FILTER_5211, 0x00000000 },
+ { AR5K_DIAG_SW_5211, 0x00000000 },
+ { AR5K_ADDAC_TEST, 0x00000000 },
+ { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+ { AR5K_FRAME_CTL_QOSM, 0x000fc78f },
+ { AR5K_XRMODE, 0x2a82301a },
+ { AR5K_XRDELAY, 0x05dc01e0 },
+ { AR5K_XRTIMEOUT, 0x1f402710 },
+ { AR5K_XRCHIRP, 0x01f40000 },
+ { AR5K_XRSTOMP, 0x00001e1c },
+ { AR5K_SLEEP0, 0x0002aaaa },
+ { AR5K_SLEEP1, 0x02005555 },
+ { AR5K_SLEEP2, 0x00000000 },
+ { AR5K_BSS_IDM0, 0xffffffff },
+ { AR5K_BSS_IDM1, 0x0000ffff },
+ { AR5K_TXPC, 0x00000000 },
+ { AR5K_PROFCNT_TX, 0x00000000 },
+ { AR5K_PROFCNT_RX, 0x00000000 },
+ { AR5K_PROFCNT_RXCLR, 0x00000000 },
+ { AR5K_PROFCNT_CYCLE, 0x00000000 },
+ { AR5K_QUIET_CTL1, 0x00000088 },
+ /* Initial rate duration table (32 entries )*/
+ { AR5K_RATE_DUR(0), 0x00000000 },
+ { AR5K_RATE_DUR(1), 0x0000008c },
+ { AR5K_RATE_DUR(2), 0x000000e4 },
+ { AR5K_RATE_DUR(3), 0x000002d5 },
+ { AR5K_RATE_DUR(4), 0x00000000 },
+ { AR5K_RATE_DUR(5), 0x00000000 },
+ { AR5K_RATE_DUR(6), 0x000000a0 },
+ { AR5K_RATE_DUR(7), 0x000001c9 },
+ { AR5K_RATE_DUR(8), 0x0000002c },
+ { AR5K_RATE_DUR(9), 0x0000002c },
+ { AR5K_RATE_DUR(10), 0x00000030 },
+ { AR5K_RATE_DUR(11), 0x0000003c },
+ { AR5K_RATE_DUR(12), 0x0000002c },
+ { AR5K_RATE_DUR(13), 0x0000002c },
+ { AR5K_RATE_DUR(14), 0x00000030 },
+ { AR5K_RATE_DUR(15), 0x0000003c },
+ { AR5K_RATE_DUR(16), 0x00000000 },
+ { AR5K_RATE_DUR(17), 0x00000000 },
+ { AR5K_RATE_DUR(18), 0x00000000 },
+ { AR5K_RATE_DUR(19), 0x00000000 },
+ { AR5K_RATE_DUR(20), 0x00000000 },
+ { AR5K_RATE_DUR(21), 0x00000000 },
+ { AR5K_RATE_DUR(22), 0x00000000 },
+ { AR5K_RATE_DUR(23), 0x00000000 },
+ { AR5K_RATE_DUR(24), 0x000000d5 },
+ { AR5K_RATE_DUR(25), 0x000000df },
+ { AR5K_RATE_DUR(26), 0x00000102 },
+ { AR5K_RATE_DUR(27), 0x0000013a },
+ { AR5K_RATE_DUR(28), 0x00000075 },
+ { AR5K_RATE_DUR(29), 0x0000007f },
+ { AR5K_RATE_DUR(30), 0x000000a2 },
+ { AR5K_RATE_DUR(31), 0x00000000 },
+ { AR5K_QUIET_CTL2, 0x00010002 },
+ { AR5K_TSF_PARM, 0x00000001 },
+ { AR5K_QOS_NOACK, 0x000000c0 },
+ { AR5K_PHY_ERR_FIL, 0x00000000 },
+ { AR5K_XRLAT_TX, 0x00000168 },
+ { AR5K_ACKSIFS, 0x00000000 },
+ /* Rate -> db table
+ * notice ...03<-02<-01<-00 ! */
+ { AR5K_RATE2DB(0), 0x03020100 },
+ { AR5K_RATE2DB(1), 0x07060504 },
+ { AR5K_RATE2DB(2), 0x0b0a0908 },
+ { AR5K_RATE2DB(3), 0x0f0e0d0c },
+ { AR5K_RATE2DB(4), 0x13121110 },
+ { AR5K_RATE2DB(5), 0x17161514 },
+ { AR5K_RATE2DB(6), 0x1b1a1918 },
+ { AR5K_RATE2DB(7), 0x1f1e1d1c },
+ /* Db -> Rate table */
+ { AR5K_DB2RATE(0), 0x03020100 },
+ { AR5K_DB2RATE(1), 0x07060504 },
+ { AR5K_DB2RATE(2), 0x0b0a0908 },
+ { AR5K_DB2RATE(3), 0x0f0e0d0c },
+ { AR5K_DB2RATE(4), 0x13121110 },
+ { AR5K_DB2RATE(5), 0x17161514 },
+ { AR5K_DB2RATE(6), 0x1b1a1918 },
+ { AR5K_DB2RATE(7), 0x1f1e1d1c },
+ /* PHY registers (Common settings
+ * for all chips/modes) */
+ { AR5K_PHY(3), 0xad848e19 },
+ { AR5K_PHY(4), 0x7d28e000 },
+ { AR5K_PHY_TIMING_3, 0x9c0a9f6b },
+ { AR5K_PHY_ACT, 0x00000000 },
+ { AR5K_PHY(16), 0x206a017a },
+ { AR5K_PHY(21), 0x00000859 },
+ { AR5K_PHY_BIN_MASK_1, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_2, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_3, 0x00000000 },
+ { AR5K_PHY_BIN_MASK_CTL, 0x00800000 },
+ { AR5K_PHY_ANT_CTL, 0x00000001 },
+ /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */
+ { AR5K_PHY_MAX_RX_LEN, 0x00000c80 },
+ { AR5K_PHY_IQ, 0x05100000 },
+ { AR5K_PHY_WARM_RESET, 0x00000001 },
+ { AR5K_PHY_CTL, 0x00000004 },
+ { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 },
+ { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d },
+ { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f },
+ { AR5K_PHY(82), 0x9280b212 },
+ { AR5K_PHY_RADAR, 0x5d50e188 },
+ /*{ AR5K_PHY(86), 0x000000ff },*/
+ { AR5K_PHY(87), 0x004b6a8e },
+ { AR5K_PHY_NFTHRES, 0x000003ce },
+ { AR5K_PHY_RESTART, 0x192fb515 },
+ { AR5K_PHY(94), 0x00000001 },
+ { AR5K_PHY_RFBUS_REQ, 0x00000000 },
+ /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */
+ /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */
+ { AR5K_PHY(644), 0x00806333 },
+ { AR5K_PHY(645), 0x00106c10 },
+ { AR5K_PHY(646), 0x009c4060 },
+ /* { AR5K_PHY(647), 0x1483800a }, */
+ /* { AR5K_PHY(648), 0x01831061 }, */ /* Old value */
+ { AR5K_PHY(648), 0x018830c6 },
+ { AR5K_PHY(649), 0x00000400 },
+ /*{ AR5K_PHY(650), 0x000001b5 },*/
+ { AR5K_PHY(651), 0x00000000 },
+ { AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
+ { AR5K_PHY_TXPOWER_RATE2, 0x20202020 },
+ /*{ AR5K_PHY(655), 0x13c889af },*/
+ { AR5K_PHY(656), 0x38490a20 },
+ { AR5K_PHY(657), 0x00007bb6 },
+ { AR5K_PHY(658), 0x0fff3ffc },
+};
+
+/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */
+static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
+ { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+ { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+ { AR5K_DCU_GBL_IFS_SIFS,
+ { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } },
+ { AR5K_DCU_GBL_IFS_SLOT,
+ { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } },
+ { AR5K_DCU_GBL_IFS_EIFS,
+ { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } },
+ { AR5K_DCU_GBL_IFS_MISC,
+ { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } },
+ { AR5K_TIME_OUT,
+ { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } },
+ { AR5K_PHY_TURBO,
+ { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } },
+ { AR5K_PHY(8),
+ { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } },
+ { AR5K_PHY_RF_CTL2,
+ { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_SETTLING,
+ { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } },
+ { AR5K_PHY_AGCCTL,
+ { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } },
+ { AR5K_PHY_NF,
+ { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+ { AR5K_PHY_WEAK_OFDM_HIGH_THR,
+ { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } },
+ { AR5K_PHY(70),
+ { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } },
+ { AR5K_PHY_OFDM_SELFCORR,
+ { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } },
+ { 0xa230,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } },
+};
+
+/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5111_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+ { AR5K_USEC_5211,
+ { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+};
+
+static const struct ath5k_ini rf5111_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x00022ffe },
+ { 0x983c, 0x00020100 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284613c },
+ { AR5K_PHY_PAPD_PROBE, 0x00004883 },
+ { 0x9940, 0x00000004 },
+ { 0x9958, 0x000000ff },
+ { 0x9974, 0x00000000 },
+ { AR5K_PHY_SPENDING, 0x00000018 },
+ { AR5K_PHY_CCKTXCTL, 0x00000000 },
+ { AR5K_PHY_CCK_CROSSCORR, 0xd03e6788 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 },
+ { 0xa23c, 0x13c889af },
+};
+
+/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+};
+
+static const struct ath5k_ini rf5112_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x00022ffe },
+ { 0x983c, 0x00020100 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284613c },
+ { AR5K_PHY_PAPD_PROBE, 0x00004882 },
+ { 0x9940, 0x00000004 },
+ { 0x9958, 0x000000ff },
+ { 0x9974, 0x00000000 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 },
+ { 0xa23c, 0x13c889af },
+};
+
+/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */
+static const struct ath5k_ini_mode rf5413_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_GAIN,
+ { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+ { 0xa300,
+ { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } },
+ { 0xa304,
+ { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } },
+ { 0xa308,
+ { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } },
+ { 0xa30c,
+ { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } },
+ { 0xa310,
+ { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } },
+ { 0xa314,
+ { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } },
+ { 0xa318,
+ { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } },
+ { 0xa31c,
+ { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } },
+ { 0xa320,
+ { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } },
+ { 0xa324,
+ { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } },
+ { 0xa328,
+ { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } },
+ { 0xa32c,
+ { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } },
+ { 0xa330,
+ { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } },
+ { 0xa334,
+ { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } },
+};
+
+static const struct ath5k_ini rf5413_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_5414_CBCFG, 0x00000010 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { 0x809c, 0x00000000 },
+ { 0x80a0, 0x00000000 },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800003f9 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x00081fff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c16a },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x081b7caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa338, 0x00000000 },
+ { 0xa33c, 0x00000000 },
+ { 0xa340, 0x00000000 },
+ { 0xa344, 0x00000000 },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */
+/* XXX: a mode ? */
+static const struct ath5k_ini_mode rf2413_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x0a020001, 0x05020000, 0x0a020001, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00 } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000002, 0x00000002, 0x0000000a, 0x0000000a, 0x0000000a } },
+ { AR5K_PHY_GAIN,
+ { 0x0018da6d, 0x0018da6d, 0x001a6a64, 0x001a6a64, 0x001a6a64 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da, 0x0de8b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e, 0x7e800d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3137665e, 0x3137665e, 0x3137665e, 0x3139605e, 0x3137665e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x002c0140, 0x002c0140, 0x0042c140, 0x0042c140, 0x0042c140 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+};
+
+static const struct ath5k_ini rf2413_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800000a8 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x000000ff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c16a },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x001b7caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa300, 0x18010000 },
+ { 0xa304, 0x30032602 },
+ { 0xa308, 0x48073e06 },
+ { 0xa30c, 0x560b4c0a },
+ { 0xa310, 0x641a600f },
+ { 0xa314, 0x784f6e1b },
+ { 0xa318, 0x868f7c5a },
+ { 0xa31c, 0x8ecf865b },
+ { 0xa320, 0x9d4f970f },
+ { 0xa324, 0xa5cfa18f },
+ { 0xa328, 0xb55faf1f },
+ { 0xa32c, 0xbddfb99f },
+ { 0xa330, 0xcd7fc73f },
+ { 0xa334, 0xd5ffd1bf },
+ { 0xa338, 0x00000000 },
+ { 0xa33c, 0x00000000 },
+ { 0xa340, 0x00000000 },
+ { 0xa344, 0x00000000 },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */
+/* XXX: a mode ? */
+static const struct ath5k_ini_mode rf2425_ini_mode_end[] = {
+ { AR5K_TXCFG,
+ /* a/XR aTurbo b g (DYN) gTurbo */
+ { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+ { AR5K_USEC_5211,
+ { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+ { AR5K_PHY_TURBO,
+ { 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000001 } },
+ { AR5K_PHY_RF_CTL3,
+ { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+ { AR5K_PHY_RF_CTL4,
+ { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+ { AR5K_PHY_PA_CTL,
+ { 0x00000003, 0x00000003, 0x0000000b, 0x0000000b, 0x0000000b } },
+ { AR5K_PHY_SETTLING,
+ { 0x1372161c, 0x13721c25, 0x13721722, 0x13721422, 0x13721c25 } },
+ { AR5K_PHY_GAIN,
+ { 0x0018fa61, 0x0018fa61, 0x00199a65, 0x00199a65, 0x00199a65 } },
+ { AR5K_PHY_DESIRED_SIZE,
+ { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } },
+ { AR5K_PHY_SIG,
+ { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+ { AR5K_PHY_AGCCOARSE,
+ { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } },
+ { AR5K_PHY_WEAK_OFDM_LOW_THR,
+ { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+ { AR5K_PHY_RX_DELAY,
+ { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+ { AR5K_PHY_FRAME_CTL_5211,
+ { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+ { AR5K_PHY_CCKTXCTL,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { AR5K_PHY_CCK_CROSSCORR,
+ { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+ { AR5K_PHY_GAIN_2GHZ,
+ { 0x00000140, 0x00000140, 0x0052c140, 0x0052c140, 0x0052c140 } },
+ { AR5K_PHY_CCK_RX_CTL_4,
+ { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+ { 0xa324,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa328,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa32c,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa330,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+ { 0xa334,
+ { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+};
+
+static const struct ath5k_ini rf2425_ini_common_end[] = {
+ { AR5K_DCU_FP, 0x000003e0 },
+ { AR5K_SEQ_MASK, 0x0000000f },
+ { 0x809c, 0x00000000 },
+ { 0x80a0, 0x00000000 },
+ { AR5K_MIC_QOS_CTL, 0x00000000 },
+ { AR5K_MIC_QOS_SEL, 0x00000000 },
+ { AR5K_MISC_MODE, 0x00000000 },
+ { AR5K_OFDM_FIL_CNT, 0x00000000 },
+ { AR5K_CCK_FIL_CNT, 0x00000000 },
+ { AR5K_PHYERR_CNT1, 0x00000000 },
+ { AR5K_PHYERR_CNT1_MASK, 0x00000000 },
+ { AR5K_PHYERR_CNT2, 0x00000000 },
+ { AR5K_PHYERR_CNT2_MASK, 0x00000000 },
+ { AR5K_TSF_THRES, 0x00000000 },
+ { 0x8140, 0x800003f9 },
+ { 0x8144, 0x00000000 },
+ { AR5K_PHY_AGC, 0x00000000 },
+ { AR5K_PHY_ADC_CTL, 0x0000a000 },
+ { 0x983c, 0x00200400 },
+ { AR5K_PHY_GAIN_OFFSET, 0x1284233c },
+ { AR5K_PHY_SCR, 0x0000001f },
+ { AR5K_PHY_SLMT, 0x00000080 },
+ { AR5K_PHY_SCAL, 0x0000000e },
+ { 0x9958, 0x00081fff },
+ { AR5K_PHY_TIMING_7, 0x00000000 },
+ { AR5K_PHY_TIMING_8, 0x02800000 },
+ { AR5K_PHY_TIMING_11, 0x00000000 },
+ { 0x99dc, 0xfebadbe8 },
+ { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 },
+ { 0x99e4, 0xaaaaaaaa },
+ { 0x99e8, 0x3c466478 },
+ { 0x99ec, 0x000000aa },
+ { AR5K_PHY_SCLOCK, 0x0000000c },
+ { AR5K_PHY_SDELAY, 0x000000ff },
+ { AR5K_PHY_SPENDING, 0x00000014 },
+ { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 },
+ { AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
+ { AR5K_PHY_TXPOWER_RATE4, 0x20202020 },
+ { 0xa23c, 0x93c889af },
+ { AR5K_PHY_FAST_ADC, 0x00000001 },
+ { 0xa250, 0x0000a000 },
+ { AR5K_PHY_BLUETOOTH, 0x00000000 },
+ { AR5K_PHY_TPC_RG1, 0x0cc75380 },
+ { 0xa25c, 0x0f0f0f01 },
+ { 0xa260, 0x5f690f01 },
+ { 0xa264, 0x00418a11 },
+ { 0xa268, 0x00000000 },
+ { AR5K_PHY_TPC_RG5, 0x0c30c166 },
+ { 0xa270, 0x00820820 },
+ { 0xa274, 0x081a3caa },
+ { 0xa278, 0x1ce739ce },
+ { 0xa27c, 0x051701ce },
+ { 0xa300, 0x16010000 },
+ { 0xa304, 0x2c032402 },
+ { 0xa308, 0x48433e42 },
+ { 0xa30c, 0x5a0f500b },
+ { 0xa310, 0x6c4b624a },
+ { 0xa314, 0x7e8b748a },
+ { 0xa318, 0x96cf8ccb },
+ { 0xa31c, 0xa34f9d0f },
+ { 0xa320, 0xa7cfa58f },
+ { 0xa348, 0x3fffffff },
+ { 0xa34c, 0x3fffffff },
+ { 0xa350, 0x3fffffff },
+ { 0xa354, 0x0003ffff },
+ { 0xa358, 0x79a8aa1f },
+ { 0xa35c, 0x066c420f },
+ { 0xa360, 0x0f282207 },
+ { 0xa364, 0x17601685 },
+ { 0xa368, 0x1f801104 },
+ { 0xa36c, 0x37a00c03 },
+ { 0xa370, 0x3fc40883 },
+ { 0xa374, 0x57c00803 },
+ { 0xa378, 0x5fd80682 },
+ { 0xa37c, 0x7fe00482 },
+ { 0xa380, 0x7f3c7bba },
+ { 0xa384, 0xf3307ff0 },
+};
+
+/*
+ * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with
+ * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI)
+ */
+
+/* RF5111 Initial BaseBand Gain settings */
+static const struct ath5k_ini rf5111_ini_bbgain[] = {
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000020 },
+ { AR5K_BB_GAIN(2), 0x00000010 },
+ { AR5K_BB_GAIN(3), 0x00000030 },
+ { AR5K_BB_GAIN(4), 0x00000008 },
+ { AR5K_BB_GAIN(5), 0x00000028 },
+ { AR5K_BB_GAIN(6), 0x00000004 },
+ { AR5K_BB_GAIN(7), 0x00000024 },
+ { AR5K_BB_GAIN(8), 0x00000014 },
+ { AR5K_BB_GAIN(9), 0x00000034 },
+ { AR5K_BB_GAIN(10), 0x0000000c },
+ { AR5K_BB_GAIN(11), 0x0000002c },
+ { AR5K_BB_GAIN(12), 0x00000002 },
+ { AR5K_BB_GAIN(13), 0x00000022 },
+ { AR5K_BB_GAIN(14), 0x00000012 },
+ { AR5K_BB_GAIN(15), 0x00000032 },
+ { AR5K_BB_GAIN(16), 0x0000000a },
+ { AR5K_BB_GAIN(17), 0x0000002a },
+ { AR5K_BB_GAIN(18), 0x00000006 },
+ { AR5K_BB_GAIN(19), 0x00000026 },
+ { AR5K_BB_GAIN(20), 0x00000016 },
+ { AR5K_BB_GAIN(21), 0x00000036 },
+ { AR5K_BB_GAIN(22), 0x0000000e },
+ { AR5K_BB_GAIN(23), 0x0000002e },
+ { AR5K_BB_GAIN(24), 0x00000001 },
+ { AR5K_BB_GAIN(25), 0x00000021 },
+ { AR5K_BB_GAIN(26), 0x00000011 },
+ { AR5K_BB_GAIN(27), 0x00000031 },
+ { AR5K_BB_GAIN(28), 0x00000009 },
+ { AR5K_BB_GAIN(29), 0x00000029 },
+ { AR5K_BB_GAIN(30), 0x00000005 },
+ { AR5K_BB_GAIN(31), 0x00000025 },
+ { AR5K_BB_GAIN(32), 0x00000015 },
+ { AR5K_BB_GAIN(33), 0x00000035 },
+ { AR5K_BB_GAIN(34), 0x0000000d },
+ { AR5K_BB_GAIN(35), 0x0000002d },
+ { AR5K_BB_GAIN(36), 0x00000003 },
+ { AR5K_BB_GAIN(37), 0x00000023 },
+ { AR5K_BB_GAIN(38), 0x00000013 },
+ { AR5K_BB_GAIN(39), 0x00000033 },
+ { AR5K_BB_GAIN(40), 0x0000000b },
+ { AR5K_BB_GAIN(41), 0x0000002b },
+ { AR5K_BB_GAIN(42), 0x0000002b },
+ { AR5K_BB_GAIN(43), 0x0000002b },
+ { AR5K_BB_GAIN(44), 0x0000002b },
+ { AR5K_BB_GAIN(45), 0x0000002b },
+ { AR5K_BB_GAIN(46), 0x0000002b },
+ { AR5K_BB_GAIN(47), 0x0000002b },
+ { AR5K_BB_GAIN(48), 0x0000002b },
+ { AR5K_BB_GAIN(49), 0x0000002b },
+ { AR5K_BB_GAIN(50), 0x0000002b },
+ { AR5K_BB_GAIN(51), 0x0000002b },
+ { AR5K_BB_GAIN(52), 0x0000002b },
+ { AR5K_BB_GAIN(53), 0x0000002b },
+ { AR5K_BB_GAIN(54), 0x0000002b },
+ { AR5K_BB_GAIN(55), 0x0000002b },
+ { AR5K_BB_GAIN(56), 0x0000002b },
+ { AR5K_BB_GAIN(57), 0x0000002b },
+ { AR5K_BB_GAIN(58), 0x0000002b },
+ { AR5K_BB_GAIN(59), 0x0000002b },
+ { AR5K_BB_GAIN(60), 0x0000002b },
+ { AR5K_BB_GAIN(61), 0x0000002b },
+ { AR5K_BB_GAIN(62), 0x00000002 },
+ { AR5K_BB_GAIN(63), 0x00000016 },
+};
+
+/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414+) */
+static const struct ath5k_ini rf5112_ini_bbgain[] = {
+ { AR5K_BB_GAIN(0), 0x00000000 },
+ { AR5K_BB_GAIN(1), 0x00000001 },
+ { AR5K_BB_GAIN(2), 0x00000002 },
+ { AR5K_BB_GAIN(3), 0x00000003 },
+ { AR5K_BB_GAIN(4), 0x00000004 },
+ { AR5K_BB_GAIN(5), 0x00000005 },
+ { AR5K_BB_GAIN(6), 0x00000008 },
+ { AR5K_BB_GAIN(7), 0x00000009 },
+ { AR5K_BB_GAIN(8), 0x0000000a },
+ { AR5K_BB_GAIN(9), 0x0000000b },
+ { AR5K_BB_GAIN(10), 0x0000000c },
+ { AR5K_BB_GAIN(11), 0x0000000d },
+ { AR5K_BB_GAIN(12), 0x00000010 },
+ { AR5K_BB_GAIN(13), 0x00000011 },
+ { AR5K_BB_GAIN(14), 0x00000012 },
+ { AR5K_BB_GAIN(15), 0x00000013 },
+ { AR5K_BB_GAIN(16), 0x00000014 },
+ { AR5K_BB_GAIN(17), 0x00000015 },
+ { AR5K_BB_GAIN(18), 0x00000018 },
+ { AR5K_BB_GAIN(19), 0x00000019 },
+ { AR5K_BB_GAIN(20), 0x0000001a },
+ { AR5K_BB_GAIN(21), 0x0000001b },
+ { AR5K_BB_GAIN(22), 0x0000001c },
+ { AR5K_BB_GAIN(23), 0x0000001d },
+ { AR5K_BB_GAIN(24), 0x00000020 },
+ { AR5K_BB_GAIN(25), 0x00000021 },
+ { AR5K_BB_GAIN(26), 0x00000022 },
+ { AR5K_BB_GAIN(27), 0x00000023 },
+ { AR5K_BB_GAIN(28), 0x00000024 },
+ { AR5K_BB_GAIN(29), 0x00000025 },
+ { AR5K_BB_GAIN(30), 0x00000028 },
+ { AR5K_BB_GAIN(31), 0x00000029 },
+ { AR5K_BB_GAIN(32), 0x0000002a },
+ { AR5K_BB_GAIN(33), 0x0000002b },
+ { AR5K_BB_GAIN(34), 0x0000002c },
+ { AR5K_BB_GAIN(35), 0x0000002d },
+ { AR5K_BB_GAIN(36), 0x00000030 },
+ { AR5K_BB_GAIN(37), 0x00000031 },
+ { AR5K_BB_GAIN(38), 0x00000032 },
+ { AR5K_BB_GAIN(39), 0x00000033 },
+ { AR5K_BB_GAIN(40), 0x00000034 },
+ { AR5K_BB_GAIN(41), 0x00000035 },
+ { AR5K_BB_GAIN(42), 0x00000035 },
+ { AR5K_BB_GAIN(43), 0x00000035 },
+ { AR5K_BB_GAIN(44), 0x00000035 },
+ { AR5K_BB_GAIN(45), 0x00000035 },
+ { AR5K_BB_GAIN(46), 0x00000035 },
+ { AR5K_BB_GAIN(47), 0x00000035 },
+ { AR5K_BB_GAIN(48), 0x00000035 },
+ { AR5K_BB_GAIN(49), 0x00000035 },
+ { AR5K_BB_GAIN(50), 0x00000035 },
+ { AR5K_BB_GAIN(51), 0x00000035 },
+ { AR5K_BB_GAIN(52), 0x00000035 },
+ { AR5K_BB_GAIN(53), 0x00000035 },
+ { AR5K_BB_GAIN(54), 0x00000035 },
+ { AR5K_BB_GAIN(55), 0x00000035 },
+ { AR5K_BB_GAIN(56), 0x00000035 },
+ { AR5K_BB_GAIN(57), 0x00000035 },
+ { AR5K_BB_GAIN(58), 0x00000035 },
+ { AR5K_BB_GAIN(59), 0x00000035 },
+ { AR5K_BB_GAIN(60), 0x00000035 },
+ { AR5K_BB_GAIN(61), 0x00000035 },
+ { AR5K_BB_GAIN(62), 0x00000010 },
+ { AR5K_BB_GAIN(63), 0x0000001a },
+};
+
+
+/*
+ * Write initial register dump
+ */
+static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
+ const struct ath5k_ini *ini_regs, bool change_channel)
+{
+ unsigned int i;
+
+ /* Write initial registers */
+ for (i = 0; i < size; i++) {
+ /* On channel change there is
+ * no need to mess with PCU */
+ if (change_channel &&
+ ini_regs[i].ini_register >= AR5K_PCU_MIN &&
+ ini_regs[i].ini_register <= AR5K_PCU_MAX)
+ continue;
+
+ switch (ini_regs[i].ini_mode) {
+ case AR5K_INI_READ:
+ /* Cleared on read */
+ ath5k_hw_reg_read(ah, ini_regs[i].ini_register);
+ break;
+ case AR5K_INI_WRITE:
+ default:
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ini_regs[i].ini_value,
+ ini_regs[i].ini_register);
+ }
+ }
+}
+
+static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
+ unsigned int size, const struct ath5k_ini_mode *ini_mode,
+ u8 mode)
+{
+ unsigned int i;
+
+ for (i = 0; i < size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode],
+ (u32)ini_mode[i].mode_register);
+ }
+
+}
+
+int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
+{
+ /*
+ * Write initial register settings
+ */
+
+ /* For AR5212 and combatible */
+ if (ah->ah_version == AR5K_AR5212) {
+
+ /* First set of mode-specific settings */
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(ar5212_ini_mode_start),
+ ar5212_ini_mode_start, mode);
+
+ /*
+ * Write initial settings common for all modes
+ */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start),
+ ar5212_ini_common_start, change_channel);
+
+ /* Second set of mode-specific settings */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5111_ini_mode_end),
+ rf5111_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5111_ini_common_end),
+ rf5111_ini_common_end, change_channel);
+
+ /* Baseband gain table */
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5111_ini_bbgain),
+ rf5111_ini_bbgain, change_channel);
+
+ break;
+ case AR5K_RF5112:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5112_ini_mode_end),
+ rf5112_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_common_end),
+ rf5112_ini_common_end, change_channel);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, change_channel);
+
+ break;
+ case AR5K_RF5413:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf5413_ini_mode_end),
+ rf5413_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5413_ini_common_end),
+ rf5413_ini_common_end, change_channel);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, change_channel);
+
+ break;
+ case AR5K_RF2316:
+ case AR5K_RF2413:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf2413_ini_mode_end),
+ rf2413_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf2413_ini_common_end),
+ rf2413_ini_common_end, change_channel);
+
+ /* Override settings from rf2413_ini_common_end */
+ if (ah->ah_radio == AR5K_RF2316) {
+ ath5k_hw_reg_write(ah, 0x00004000,
+ AR5K_PHY_AGC);
+ ath5k_hw_reg_write(ah, 0x081b7caa,
+ 0xa274);
+ }
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, change_channel);
+ break;
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+
+ ath5k_hw_ini_mode_registers(ah,
+ ARRAY_SIZE(rf2425_ini_mode_end),
+ rf2425_ini_mode_end, mode);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf2425_ini_common_end),
+ rf2425_ini_common_end, change_channel);
+
+ ath5k_hw_ini_registers(ah,
+ ARRAY_SIZE(rf5112_ini_bbgain),
+ rf5112_ini_bbgain, change_channel);
+ break;
+ default:
+ return -EINVAL;
+
+ }
+
+ /* For AR5211 */
+ } else if (ah->ah_version == AR5K_AR5211) {
+
+ /* AR5K_MODE_11B */
+ if (mode > 2) {
+ ATH5K_ERR(ah->ah_sc,
+ "unsupported channel mode: %d\n", mode);
+ return -EINVAL;
+ }
+
+ /* Mode-specific settings */
+ ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode),
+ ar5211_ini_mode, mode);
+
+ /*
+ * Write initial settings common for all modes
+ */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini),
+ ar5211_ini, change_channel);
+
+ /* AR5211 only comes with 5111 */
+
+ /* Baseband gain table */
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain),
+ rf5111_ini_bbgain, change_channel);
+ /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */
+ } else if (ah->ah_version == AR5K_AR5210) {
+ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini),
+ ar5210_ini, change_channel);
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
new file mode 100644
index 000000000000..19555fb79c9b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2009 Bob Copeland <me@bobcopeland.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "base.h"
+
+#define ATH_SDEVICE(subv,subd) \
+ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+ .subvendor = (subv), .subdevice = (subd)
+
+#define ATH_LED(pin,polarity) .driver_data = (((pin) << 8) | (polarity))
+#define ATH_PIN(data) ((data) >> 8)
+#define ATH_POLARITY(data) ((data) & 0xff)
+
+/* Devices we match on for LED config info (typically laptops) */
+static const struct pci_device_id ath5k_led_devices[] = {
+ /* IBM-specific AR5212 */
+ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
+ /* AR5211 */
+ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) },
+ /* HP Compaq nc6xx, nc4000, nx6000 */
+ { ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) },
+ /* Acer Aspire One A150 (maximlevitsky@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) },
+ /* Acer Ferrari 5000 (russ.dill@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
+ /* E-machines E510 (tuliom@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+ /* Acer Extensa 5620z (nekoreeve@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
+ { }
+};
+
+void ath5k_led_enable(struct ath5k_softc *sc)
+{
+ if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+ ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
+ ath5k_led_off(sc);
+ }
+}
+
+void ath5k_led_on(struct ath5k_softc *sc)
+{
+ if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+ return;
+ ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
+}
+
+void ath5k_led_off(struct ath5k_softc *sc)
+{
+ if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+ return;
+ ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
+}
+
+static void
+ath5k_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
+ led_dev);
+
+ if (brightness == LED_OFF)
+ ath5k_led_off(led->sc);
+ else
+ ath5k_led_on(led->sc);
+}
+
+static int
+ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
+ const char *name, char *trigger)
+{
+ int err;
+
+ led->sc = sc;
+ strncpy(led->name, name, sizeof(led->name));
+ led->led_dev.name = led->name;
+ led->led_dev.default_trigger = trigger;
+ led->led_dev.brightness_set = ath5k_led_brightness_set;
+
+ err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
+ if (err) {
+ ATH5K_WARN(sc, "could not register LED %s\n", name);
+ led->sc = NULL;
+ }
+ return err;
+}
+
+static void
+ath5k_unregister_led(struct ath5k_led *led)
+{
+ if (!led->sc)
+ return;
+ led_classdev_unregister(&led->led_dev);
+ ath5k_led_off(led->sc);
+ led->sc = NULL;
+}
+
+void ath5k_unregister_leds(struct ath5k_softc *sc)
+{
+ ath5k_unregister_led(&sc->rx_led);
+ ath5k_unregister_led(&sc->tx_led);
+}
+
+int ath5k_init_leds(struct ath5k_softc *sc)
+{
+ int ret = 0;
+ struct ieee80211_hw *hw = sc->hw;
+ struct pci_dev *pdev = sc->pdev;
+ char name[ATH5K_LED_MAX_NAME_LEN + 1];
+ const struct pci_device_id *match;
+
+ match = pci_match_id(&ath5k_led_devices[0], pdev);
+ if (match) {
+ __set_bit(ATH_STAT_LEDSOFT, sc->status);
+ sc->led_pin = ATH_PIN(match->driver_data);
+ sc->led_on = ATH_POLARITY(match->driver_data);
+ }
+
+ if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+ goto out;
+
+ ath5k_led_enable(sc);
+
+ snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
+ ret = ath5k_register_led(sc, &sc->rx_led, name,
+ ieee80211_get_rx_led_name(hw));
+ if (ret)
+ goto out;
+
+ snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
+ ret = ath5k_register_led(sc, &sc->tx_led, name,
+ ieee80211_get_tx_led_name(hw));
+out:
+ return ret;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
new file mode 100644
index 000000000000..55122f1e1986
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -0,0 +1,1174 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*******************\
+* Generic functions *
+\*******************/
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize PCU for the various operating modes (AP/STA etc)
+ *
+ * NOTE: ah->ah_op_mode must be set before calling this.
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+ u32 pcu_reg, beacon_reg, low_id, high_id;
+
+
+ /* Preserve rest settings */
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+ pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
+ | AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+
+ beacon_reg = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_ADHOC:
+ pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_ADHOC;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_AP;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_PWR_SV : 0);
+ case NL80211_IFTYPE_MONITOR:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set PCU registers
+ */
+ low_id = AR5K_LOW_ID(ah->ah_sta_id);
+ high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ /*
+ * Set Beacon Control Register on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_update - Update mib counters (mac layer statistics)
+ *
+ * @ah: The &struct ath5k_hw
+ * @stats: The &struct ieee80211_low_level_stats we use to track
+ * statistics on the driver
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Must be
+ * called after a MIB interrupt.
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+ struct ieee80211_low_level_stats *stats)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Read-And-Clear */
+ stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+ stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+ stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+ stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+
+ /* XXX: Should we use this to track beacon count ?
+ * -we read it anyway to clear the register */
+ ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+ /* Reset profile count registers on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+ ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+ }
+
+ /* TODO: Handle ANI stats */
+}
+
+/**
+ * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: The &struct ath5k_hw
+ * @high: Flag to determine if we want to use high transmition rate
+ * for ACKs or not
+ *
+ * If high flag is set, we tell hw to use a set of control rates based on
+ * the current transmition rate (check out control_rates array inside reset.c).
+ * If not hw just uses the lowest rate available for the current modulation
+ * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+ if (ah->ah_version != AR5K_AR5212)
+ return;
+ else {
+ u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+ if (high)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ }
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+ AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+ ah->ah_turbo) <= timeout)
+ return -EINVAL;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+ ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+ return 0;
+}
+
+
+/****************\
+* BSSID handling *
+\****************/
+
+/**
+ * ath5k_hw_get_lladdr - Get station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Initialize ah->ah_sta_id using the mac address provided
+ * (just a memcpy).
+ *
+ * TODO: Remove it once we merge ath5k_softc and ath5k_hw
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/**
+ * ath5k_hw_set_lladdr - Set station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Set station id on hw using the provided mac address
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+ u32 low_id, high_id;
+ u32 pcu_reg;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set new station ID */
+ memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_set_associd - Set BSSID for association
+ *
+ * @ah: The &struct ath5k_hw
+ * @bssid: BSSID
+ * @assoc_id: Assoc id
+ *
+ * Sets the BSSID which trigers the "SME Join" operation
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+ u32 low_id, high_id;
+ u16 tim_offset = 0;
+
+ /*
+ * Set simple BSSID mask on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
+ AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
+ AR5K_BSS_IDM1);
+ }
+
+ /*
+ * Set BSSID which triggers the "SME Join" operation
+ */
+ low_id = AR5K_LOW_ID(bssid);
+ high_id = AR5K_HIGH_ID(bssid);
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+ ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+ AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+ if (assoc_id == 0) {
+ ath5k_hw_disable_pspoll(ah);
+ return;
+ }
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+ tim_offset ? tim_offset + 4 : 0);
+
+ ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ */
+/*
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ * \
+ * MAC: 0001 |
+ * BSSID-01: 0100 | --> Belongs to us
+ * BSSID-02: 1001 |
+ * /
+ * -------------------
+ * BSSID-03: 0110 | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ * On loop iteration for BSSID-01:
+ * ~(0001 ^ 0100) -> ~(0101)
+ * -> 1010
+ * bssid_mask = 1010
+ *
+ * On loop iteration for BSSID-02:
+ * bssid_mask &= ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(1001)
+ * bssid_mask = (1010) & (0110)
+ * bssid_mask = 0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01: 0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ * --> allow = (0010) == 0000 ? 1 : 0;
+ * --> allow = 0
+ *
+ * Lets now test a frame that should work:
+ *
+ * IFRAME-02: 0001 (we should allow)
+ *
+ * allow = (0001 & 1010) == 1010
+ *
+ * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
+ * --> allow = (0010) == (0010)
+ * --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03: 0100 --> allowed
+ * IFRAME-04: 1001 --> allowed
+ * IFRAME-05: 1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+ u32 low_id, high_id;
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Cache bssid mask so that we can restore it
+ * on reset */
+ memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
+ if (ah->ah_version == AR5K_AR5212) {
+ low_id = AR5K_LOW_ID(mask);
+ high_id = AR5K_HIGH_ID(mask);
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+ ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+ return 0;
+ }
+
+ return -EIO;
+}
+
+
+/************\
+* RX Control *
+\************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ * TODO: Init ANI here
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ *
+ * TODO: Detach ANI here
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /* Set the multicat filter */
+ ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+ ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (index >= 64)
+ return -EINVAL;
+ else if (index >= 32)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+ (1 << (index - 32)));
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+ return 0;
+}
+
+/**
+ * ath5k_hw_get_rx_filter - Get current rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+ u32 data, filter = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+ filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+ /*Radar detection for 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+ if (data & AR5K_PHY_ERR_FIL_RADAR)
+ filter |= AR5K_RX_FILTER_RADARERR;
+ if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+ filter |= AR5K_RX_FILTER_PHYERR;
+ }
+
+ return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter - Set rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+ u32 data = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Set PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212) {
+ if (filter & AR5K_RX_FILTER_RADARERR)
+ data |= AR5K_PHY_ERR_FIL_RADAR;
+ if (filter & AR5K_RX_FILTER_PHYERR)
+ data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+ }
+
+ /*
+ * The AR5210 uses promiscous mode to detect radar activity
+ */
+ if (ah->ah_version == AR5K_AR5210 &&
+ (filter & AR5K_RX_FILTER_RADARERR)) {
+ filter &= ~AR5K_RX_FILTER_RADARERR;
+ filter |= AR5K_RX_FILTER_PROM;
+ }
+
+ /*Zero length DMA (phy error reporting) */
+ if (data)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+ /*Write RX Filter register*/
+ ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+ /*Write PHY error filter register on 5212*/
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+/**
+ * ath5k_hw_get_tsf32 - Get a 32bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns lower 32 bits of current TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/**
+ * ath5k_hw_get_tsf64 - Get the full 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+ u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ ATH5K_TRACE(ah->ah_sc);
+
+ return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/**
+ * ath5k_hw_set_tsf64 - Set a new 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ * @tsf64: The new 64bit TSF
+ *
+ * Sets the new TSF
+ */
+void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
+{
+ ATH5K_TRACE(ah->ah_sc);
+
+ ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
+ ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
+}
+
+/**
+ * ath5k_hw_reset_tsf - Force a TSF reset
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+ u32 val;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+ /*
+ * Each write to the RESET_TSF bit toggles a hardware internal
+ * signal to reset TSF, but if left high it will cause a TSF reset
+ * on the next chip reset as well. Thus we always write the value
+ * twice to clear the signal.
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+ u32 timer1, timer2, timer3;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Set the additional timers by mode
+ */
+ switch (ah->ah_op_mode) {
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_STATION:
+ /* In STA mode timer1 is used as next wakeup
+ * timer and timer2 as next CFP duration start
+ * timer. Both in 1/8TUs. */
+ /* TODO: PCF handling */
+ if (ah->ah_version == AR5K_AR5210) {
+ timer1 = 0xffffffff;
+ timer2 = 0xffffffff;
+ } else {
+ timer1 = 0x0000ffff;
+ timer2 = 0x0007ffff;
+ }
+ /* Mark associated AP as PCF incapable for now */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM);
+ default:
+ /* On non-STA modes timer1 is used as next DMA
+ * beacon alert (DBA) timer and timer2 as next
+ * software beacon alert. Both in 1/8TUs. */
+ timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+ timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+ break;
+ }
+
+ /* Timer3 marks the end of our ATIM window
+ * a zero length window is not allowed because
+ * we 'll get no beacons */
+ timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+ /*
+ * Set the beacon register and enable all timers.
+ */
+ /* When in AP mode zero timer0 to start TSF */
+ if (ah->ah_op_mode == NL80211_IFTYPE_AP)
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+ else
+ ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+ ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+ ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+ ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+ /* Force a TSF reset if requested and enable beacons */
+ if (interval & AR5K_BEACON_RESET_TSF)
+ ath5k_hw_reset_tsf(ah);
+
+ ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+ AR5K_BEACON_ENABLE),
+ AR5K_BEACON);
+
+ /* Flush any pending BMISS interrupts on ISR by
+ * performing a clear-on-write operation on PISR
+ * register for the BMISS bit (writing a bit on
+ * ISR togles a reset for that bit and leaves
+ * the rest bits intact) */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
+ else
+ ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
+
+ /* TODO: Set enchanced sleep registers on AR5212
+ * based on vif->bss_conf params, until then
+ * disable power save reporting.*/
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
+
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+ const struct ath5k_beacon_state *state)
+{
+ u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+ /*
+ * TODO: should be changed through *state
+ * review struct ath5k_beacon_state struct
+ *
+ * XXX: These are used for cfp period bellow, are they
+ * ok ? Is it O.K. for tsf here to be 0 or should we use
+ * get_tsf ?
+ */
+ u32 dtim_count = 0; /* XXX */
+ u32 cfp_count = 0; /* XXX */
+ u32 tsf = 0; /* XXX */
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Return on an invalid beacon state */
+ if (state->bs_interval < 1)
+ return -EINVAL;
+
+ interval = state->bs_interval;
+ dtim = state->bs_dtim_period;
+
+ /*
+ * PCF support?
+ */
+ if (state->bs_cfp_period > 0) {
+ /*
+ * Enable PCF mode and set the CFP
+ * (Contention Free Period) and timer registers
+ */
+ cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+ state->bs_interval;
+ next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+ state->bs_interval;
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+ ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+ AR5K_CFP_DUR);
+ ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+ next_cfp)) << 3, AR5K_TIMER2);
+ } else {
+ /* Disable PCF mode */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_PCF);
+ }
+
+ /*
+ * Enable the beacon timer register
+ */
+ ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+ /*
+ * Start the beacon timers
+ */
+ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
+ ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+ AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+ AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+ AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+ /*
+ * Write new beacon miss threshold, if it appears to be valid
+ * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+ * and return if its not in range. We can test this by reading value and
+ * setting value to a largest value and seeing which values register.
+ */
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+ state->bs_bmiss_threshold);
+
+ /*
+ * Set sleep control register
+ * XXX: Didn't find this in 5210 code but since this register
+ * exists also in ar5k's 5210 headers i leave it as common code.
+ */
+ AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+ (state->bs_sleep_duration - 3) << 3);
+
+ /*
+ * Set enhanced sleep registers on 5212
+ */
+ if (ah->ah_version == AR5K_AR5212) {
+ if (state->bs_sleep_duration > state->bs_interval &&
+ roundup(state->bs_sleep_duration, interval) ==
+ state->bs_sleep_duration)
+ interval = state->bs_sleep_duration;
+
+ if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+ roundup(state->bs_sleep_duration, dtim) ==
+ state->bs_sleep_duration))
+ dtim = state->bs_sleep_duration;
+
+ if (interval > dtim)
+ return -EINVAL;
+
+ next_beacon = interval == dtim ? state->bs_next_dtim :
+ state->bs_next_beacon;
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+ AR5K_SLEEP0_NEXT_DTIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+ AR5K_SLEEP0_ENH_SLEEP_EN |
+ AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+ AR5K_SLEEP1_NEXT_TIM) |
+ AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+ AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+ }
+
+ return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*
+ * Disable beacon timer
+ */
+ ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+ /*
+ * Disable some beacon register values
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+ AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+ ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+ unsigned int i;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* 5210 doesn't have QCU*/
+ if (ah->ah_version == AR5K_AR5210) {
+ /*
+ * Wait for beaconn queue to finish by checking
+ * Control Register and Beacon Status Register.
+ */
+ for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+ ||
+ !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+ break;
+ udelay(10);
+ }
+
+ /* Timeout... */
+ if (i <= 0) {
+ /*
+ * Re-schedule the beacon queue
+ */
+ ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+ ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+ AR5K_BCR);
+
+ return -EIO;
+ }
+ ret = 0;
+ } else {
+ /*5211/5212*/
+ ret = ath5k_hw_register_timeout(ah,
+ AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+ AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+ return -EIO;
+ }
+
+ return ret;
+}
+#endif
+
+
+/*********************\
+* Key table functions *
+\*********************/
+
+/*
+ * Reset a key entry on the table
+ */
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+ unsigned int i, type;
+ u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry));
+
+ for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+ /* Reset associated MIC entry if TKIP
+ * is enabled located at offset (entry + 64) */
+ if (type == AR5K_KEYTABLE_TYPE_TKIP) {
+ AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE);
+ for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++)
+ ath5k_hw_reg_write(ah, 0,
+ AR5K_KEYTABLE_OFF(micentry, i));
+ }
+
+ /*
+ * Set NULL encryption on AR5212+
+ *
+ * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
+ * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
+ *
+ * Note2: Windows driver (ndiswrapper) sets this to
+ * 0x00000714 instead of 0x00000007
+ */
+ if (ah->ah_version > AR5K_AR5211) {
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(entry));
+
+ if (type == AR5K_KEYTABLE_TYPE_TKIP) {
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(micentry));
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Check if a table entry is valid
+ */
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* Check the validation flag at the end of the entry */
+ return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+ AR5K_KEYTABLE_VALID;
+}
+
+static
+int ath5k_keycache_type(const struct ieee80211_key_conf *key)
+{
+ switch (key->alg) {
+ case ALG_TKIP:
+ return AR5K_KEYTABLE_TYPE_TKIP;
+ case ALG_CCMP:
+ return AR5K_KEYTABLE_TYPE_CCM;
+ case ALG_WEP:
+ if (key->keylen == LEN_WEP40)
+ return AR5K_KEYTABLE_TYPE_40;
+ else if (key->keylen == LEN_WEP104)
+ return AR5K_KEYTABLE_TYPE_104;
+ return -EINVAL;
+ default:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+/*
+ * Set a key entry on the table
+ */
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+ const struct ieee80211_key_conf *key, const u8 *mac)
+{
+ unsigned int i;
+ int keylen;
+ __le32 key_v[5] = {};
+ __le32 key0 = 0, key1 = 0;
+ __le32 *rxmic, *txmic;
+ int keytype;
+ u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET;
+ bool is_tkip;
+ const u8 *key_ptr;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ is_tkip = (key->alg == ALG_TKIP);
+
+ /*
+ * key->keylen comes in from mac80211 in bytes.
+ * TKIP is 128 bit + 128 bit mic
+ */
+ keylen = (is_tkip) ? (128 / 8) : key->keylen;
+
+ if (entry > AR5K_KEYTABLE_SIZE ||
+ (is_tkip && micentry > AR5K_KEYTABLE_SIZE))
+ return -EOPNOTSUPP;
+
+ if (unlikely(keylen > 16))
+ return -EOPNOTSUPP;
+
+ keytype = ath5k_keycache_type(key);
+ if (keytype < 0)
+ return keytype;
+
+ /*
+ * each key block is 6 bytes wide, written as pairs of
+ * alternating 32 and 16 bit le values.
+ */
+ key_ptr = key->key;
+ for (i = 0; keylen >= 6; keylen -= 6) {
+ memcpy(&key_v[i], key_ptr, 6);
+ i += 2;
+ key_ptr += 6;
+ }
+ if (keylen)
+ memcpy(&key_v[i], key_ptr, keylen);
+
+ /* intentionally corrupt key until mic is installed */
+ if (is_tkip) {
+ key0 = key_v[0] = ~key_v[0];
+ key1 = key_v[1] = ~key_v[1];
+ }
+
+ for (i = 0; i < ARRAY_SIZE(key_v); i++)
+ ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+ AR5K_KEYTABLE_OFF(entry, i));
+
+ ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+ if (is_tkip) {
+ /* Install rx/tx MIC */
+ rxmic = (__le32 *) &key->key[16];
+ txmic = (__le32 *) &key->key[24];
+
+ if (ah->ah_combined_mic) {
+ key_v[0] = rxmic[0];
+ key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16);
+ key_v[2] = rxmic[1];
+ key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff);
+ key_v[4] = txmic[1];
+ } else {
+ key_v[0] = rxmic[0];
+ key_v[1] = 0;
+ key_v[2] = rxmic[1];
+ key_v[3] = 0;
+ key_v[4] = 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(key_v); i++)
+ ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+ AR5K_KEYTABLE_OFF(micentry, i));
+
+ ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+ AR5K_KEYTABLE_TYPE(micentry));
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry));
+ ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry));
+
+ /* restore first 2 words of key */
+ ath5k_hw_reg_write(ah, le32_to_cpu(~key0),
+ AR5K_KEYTABLE_OFF(entry, 0));
+ ath5k_hw_reg_write(ah, le32_to_cpu(~key1),
+ AR5K_KEYTABLE_OFF(entry, 1));
+ }
+
+ return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+ u32 low_id, high_id;
+
+ ATH5K_TRACE(ah->ah_sc);
+ /* Invalid entry (key table overflow) */
+ AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+ /* MAC may be NULL if it's a broadcast key. In this case no need to
+ * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+ if (!mac) {
+ low_id = 0xffffffff;
+ high_id = 0xffff | AR5K_KEYTABLE_VALID;
+ } else {
+ low_id = AR5K_LOW_ID(mac);
+ high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+ }
+
+ ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+ ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
new file mode 100644
index 000000000000..9e2faae5ae94
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -0,0 +1,2599 @@
+/*
+ * PHY functions
+ *
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_PHY
+
+#include <linux/delay.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "rfbuffer.h"
+#include "rfgain.h"
+
+/*
+ * Used to modify RF Banks before writing them to AR5K_RF_BUFFER
+ */
+static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
+ const struct ath5k_rf_reg *rf_regs,
+ u32 val, u8 reg_id, bool set)
+{
+ const struct ath5k_rf_reg *rfreg = NULL;
+ u8 offset, bank, num_bits, col, position;
+ u16 entry;
+ u32 mask, data, last_bit, bits_shifted, first_bit;
+ u32 *rfb;
+ s32 bits_left;
+ int i;
+
+ data = 0;
+ rfb = ah->ah_rf_banks;
+
+ for (i = 0; i < ah->ah_rf_regs_count; i++) {
+ if (rf_regs[i].index == reg_id) {
+ rfreg = &rf_regs[i];
+ break;
+ }
+ }
+
+ if (rfb == NULL || rfreg == NULL) {
+ ATH5K_PRINTF("Rf register not found!\n");
+ /* should not happen */
+ return 0;
+ }
+
+ bank = rfreg->bank;
+ num_bits = rfreg->field.len;
+ first_bit = rfreg->field.pos;
+ col = rfreg->field.col;
+
+ /* first_bit is an offset from bank's
+ * start. Since we have all banks on
+ * the same array, we use this offset
+ * to mark each bank's start */
+ offset = ah->ah_offset[bank];
+
+ /* Boundary check */
+ if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) {
+ ATH5K_PRINTF("invalid values at offset %u\n", offset);
+ return 0;
+ }
+
+ entry = ((first_bit - 1) / 8) + offset;
+ position = (first_bit - 1) % 8;
+
+ if (set)
+ data = ath5k_hw_bitswap(val, num_bits);
+
+ for (bits_shifted = 0, bits_left = num_bits; bits_left > 0;
+ position = 0, entry++) {
+
+ last_bit = (position + bits_left > 8) ? 8 :
+ position + bits_left;
+
+ mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) <<
+ (col * 8);
+
+ if (set) {
+ rfb[entry] &= ~mask;
+ rfb[entry] |= ((data << position) << (col * 8)) & mask;
+ data >>= (8 - position);
+ } else {
+ data |= (((rfb[entry] & mask) >> (col * 8)) >> position)
+ << bits_shifted;
+ bits_shifted += last_bit - position;
+ }
+
+ bits_left -= 8 - position;
+ }
+
+ data = set ? 1 : ath5k_hw_bitswap(data, num_bits);
+
+ return data;
+}
+
+/**********************\
+* RF Gain optimization *
+\**********************/
+
+/*
+ * This code is used to optimize rf gain on different environments
+ * (temprature mostly) based on feedback from a power detector.
+ *
+ * It's only used on RF5111 and RF5112, later RF chips seem to have
+ * auto adjustment on hw -notice they have a much smaller BANK 7 and
+ * no gain optimization ladder-.
+ *
+ * For more infos check out this patent doc
+ * http://www.freepatentsonline.com/7400691.html
+ *
+ * This paper describes power drops as seen on the receiver due to
+ * probe packets
+ * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
+ * %20of%20Power%20Control.pdf
+ *
+ * And this is the MadWiFi bug entry related to the above
+ * http://madwifi-project.org/ticket/1659
+ * with various measurements and diagrams
+ *
+ * TODO: Deal with power drops due to probes by setting an apropriate
+ * tx power on the probe packets ! Make this part of the calibration process.
+ */
+
+/* Initialize ah_gain durring attach */
+int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
+{
+ /* Initialize the gain optimization values */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 35;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ case AR5K_RF5112:
+ ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
+ ah->ah_gain.g_low = 20;
+ ah->ah_gain.g_high = 85;
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Schedule a gain probe check on the next transmited packet.
+ * That means our next packet is going to be sent with lower
+ * tx power and a Peak to Average Power Detector (PAPD) will try
+ * to measure the gain.
+ *
+ * TODO: Use propper tx power setting for the probe packet so
+ * that we don't observe a serious power drop on the receiver
+ *
+ * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
+ * just after we enable the probe so that we don't mess with
+ * standard traffic ? Maybe it's time to use sw interrupts and
+ * a probe tasklet !!!
+ */
+static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
+{
+
+ /* Skip if gain calibration is inactive or
+ * we already handle a probe request */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)
+ return;
+
+ /* Send the packet with 2dB below max power as
+ * patent doc suggest */
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+ AR5K_PHY_PAPD_PROBE_TXPOWER) |
+ AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
+
+ ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED;
+
+}
+
+/* Calculate gain_F measurement correction
+ * based on the current step for RF5112 rev. 2 */
+static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
+{
+ u32 mix, step;
+ u32 *rf;
+ const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
+ const struct ath5k_rf_reg *rf_regs;
+
+ /* Only RF5112 Rev. 2 supports it */
+ if ((ah->ah_radio != AR5K_RF5112) ||
+ (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A))
+ return 0;
+
+ go = &rfgain_opt_5112;
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ if (ah->ah_rf_banks == NULL)
+ return 0;
+
+ rf = ah->ah_rf_banks;
+ ah->ah_gain.g_f_corr = 0;
+
+ /* No VGA (Variable Gain Amplifier) override, skip */
+ if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, false) != 1)
+ return 0;
+
+ /* Mix gain stepping */
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, false);
+
+ /* Mix gain override */
+ mix = g_step->gos_param[0];
+
+ switch (mix) {
+ case 3:
+ ah->ah_gain.g_f_corr = step * 2;
+ break;
+ case 2:
+ ah->ah_gain.g_f_corr = (step - 5) * 2;
+ break;
+ case 1:
+ ah->ah_gain.g_f_corr = step;
+ break;
+ default:
+ ah->ah_gain.g_f_corr = 0;
+ break;
+ }
+
+ return ah->ah_gain.g_f_corr;
+}
+
+/* Check if current gain_F measurement is in the range of our
+ * power detector windows. If we get a measurement outside range
+ * we know it's not accurate (detectors can't measure anything outside
+ * their detection window) so we must ignore it */
+static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
+{
+ const struct ath5k_rf_reg *rf_regs;
+ u32 step, mix_ovr, level[4];
+ u32 *rf;
+
+ if (ah->ah_rf_banks == NULL)
+ return false;
+
+ rf = ah->ah_rf_banks;
+
+ if (ah->ah_radio == AR5K_RF5111) {
+
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+
+ step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP,
+ false);
+
+ level[0] = 0;
+ level[1] = (step == 63) ? 50 : step + 4;
+ level[2] = (step != 63) ? 64 : level[0];
+ level[3] = level[2] + 50 ;
+
+ ah->ah_gain.g_high = level[3] -
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
+ ah->ah_gain.g_low = level[0] +
+ (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
+ } else {
+
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+
+ mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR,
+ false);
+
+ level[0] = level[2] = 0;
+
+ if (mix_ovr == 1) {
+ level[1] = level[3] = 83;
+ } else {
+ level[1] = level[3] = 107;
+ ah->ah_gain.g_high = 55;
+ }
+ }
+
+ return (ah->ah_gain.g_current >= level[0] &&
+ ah->ah_gain.g_current <= level[1]) ||
+ (ah->ah_gain.g_current >= level[2] &&
+ ah->ah_gain.g_current <= level[3]);
+}
+
+/* Perform gain_F adjustment by choosing the right set
+ * of parameters from rf gain optimization ladder */
+static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
+{
+ const struct ath5k_gain_opt *go;
+ const struct ath5k_gain_opt_step *g_step;
+ int ret = 0;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ go = &rfgain_opt_5111;
+ break;
+ case AR5K_RF5112:
+ go = &rfgain_opt_5112;
+ break;
+ default:
+ return 0;
+ }
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {
+
+ /* Reached maximum */
+ if (ah->ah_gain.g_step_idx == 0)
+ return -1;
+
+ for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+ ah->ah_gain.g_target >= ah->ah_gain.g_high &&
+ ah->ah_gain.g_step_idx > 0;
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
+ ah->ah_gain.g_target -= 2 *
+ (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -
+ g_step->gos_gain);
+
+ ret = 1;
+ goto done;
+ }
+
+ if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {
+
+ /* Reached minimum */
+ if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))
+ return -2;
+
+ for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+ ah->ah_gain.g_target <= ah->ah_gain.g_low &&
+ ah->ah_gain.g_step_idx < go->go_steps_count-1;
+ g_step = &go->go_step[ah->ah_gain.g_step_idx])
+ ah->ah_gain.g_target -= 2 *
+ (go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
+ g_step->gos_gain);
+
+ ret = 2;
+ goto done;
+ }
+
+done:
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+ "ret %d, gain step %u, current gain %u, target gain %u\n",
+ ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current,
+ ah->ah_gain.g_target);
+
+ return ret;
+}
+
+/* Main callback for thermal rf gain calibration engine
+ * Check for a new gain reading and schedule an adjustment
+ * if needed.
+ *
+ * TODO: Use sw interrupt to schedule reset if gain_F needs
+ * adjustment */
+enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
+{
+ u32 data, type;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (ah->ah_rf_banks == NULL ||
+ ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE)
+ return AR5K_RFGAIN_INACTIVE;
+
+ /* No check requested, either engine is inactive
+ * or an adjustment is already requested */
+ if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED)
+ goto done;
+
+ /* Read the PAPD (Peak to Average Power Detector)
+ * register */
+ data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
+
+ /* No probe is scheduled, read gain_F measurement */
+ if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
+ ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
+ type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
+
+ /* If tx packet is CCK correct the gain_F measurement
+ * by cck ofdm gain delta */
+ if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) {
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
+ ah->ah_gain.g_current +=
+ ee->ee_cck_ofdm_gain_delta;
+ else
+ ah->ah_gain.g_current +=
+ AR5K_GAIN_CCK_PROBE_CORR;
+ }
+
+ /* Further correct gain_F measurement for
+ * RF5112A radios */
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ ath5k_hw_rf_gainf_corr(ah);
+ ah->ah_gain.g_current =
+ ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ?
+ (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
+ 0;
+ }
+
+ /* Check if measurement is ok and if we need
+ * to adjust gain, schedule a gain adjustment,
+ * else switch back to the acive state */
+ if (ath5k_hw_rf_check_gainf_readback(ah) &&
+ AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
+ ath5k_hw_rf_gainf_adjust(ah)) {
+ ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE;
+ } else {
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ }
+ }
+
+done:
+ return ah->ah_gain.g_state;
+}
+
+/* Write initial rf gain table to set the RF sensitivity
+ * this one works on all RF chips and has nothing to do
+ * with gain_F calibration */
+int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
+{
+ const struct ath5k_ini_rfgain *ath5k_rfg;
+ unsigned int i, size;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ ath5k_rfg = rfgain_5111;
+ size = ARRAY_SIZE(rfgain_5111);
+ break;
+ case AR5K_RF5112:
+ ath5k_rfg = rfgain_5112;
+ size = ARRAY_SIZE(rfgain_5112);
+ break;
+ case AR5K_RF2413:
+ ath5k_rfg = rfgain_2413;
+ size = ARRAY_SIZE(rfgain_2413);
+ break;
+ case AR5K_RF2316:
+ ath5k_rfg = rfgain_2316;
+ size = ARRAY_SIZE(rfgain_2316);
+ break;
+ case AR5K_RF5413:
+ ath5k_rfg = rfgain_5413;
+ size = ARRAY_SIZE(rfgain_5413);
+ break;
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ ath5k_rfg = rfgain_2425;
+ size = ARRAY_SIZE(rfgain_2425);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (freq) {
+ case AR5K_INI_RFGAIN_2GHZ:
+ case AR5K_INI_RFGAIN_5GHZ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
+ (u32)ath5k_rfg[i].rfg_register);
+ }
+
+ return 0;
+}
+
+
+
+/********************\
+* RF Registers setup *
+\********************/
+
+
+/*
+ * Setup RF registers by writing rf buffer on hw
+ */
+int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ unsigned int mode)
+{
+ const struct ath5k_rf_reg *rf_regs;
+ const struct ath5k_ini_rfbuffer *ini_rfb;
+ const struct ath5k_gain_opt *go = NULL;
+ const struct ath5k_gain_opt_step *g_step;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 ee_mode = 0;
+ u32 *rfb;
+ int i, obdb = -1, bank = -1;
+
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ rf_regs = rf_regs_5111;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111);
+ ini_rfb = rfb_5111;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111);
+ go = &rfgain_opt_5111;
+ break;
+ case AR5K_RF5112:
+ if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+ rf_regs = rf_regs_5112a;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a);
+ ini_rfb = rfb_5112a;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a);
+ } else {
+ rf_regs = rf_regs_5112;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112);
+ ini_rfb = rfb_5112;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112);
+ }
+ go = &rfgain_opt_5112;
+ break;
+ case AR5K_RF2413:
+ rf_regs = rf_regs_2413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413);
+ ini_rfb = rfb_2413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413);
+ break;
+ case AR5K_RF2316:
+ rf_regs = rf_regs_2316;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316);
+ ini_rfb = rfb_2316;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316);
+ break;
+ case AR5K_RF5413:
+ rf_regs = rf_regs_5413;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413);
+ ini_rfb = rfb_5413;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413);
+ break;
+ case AR5K_RF2317:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ ini_rfb = rfb_2317;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317);
+ break;
+ case AR5K_RF2425:
+ rf_regs = rf_regs_2425;
+ ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425);
+ if (ah->ah_mac_srev < AR5K_SREV_AR2417) {
+ ini_rfb = rfb_2425;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425);
+ } else {
+ ini_rfb = rfb_2417;
+ ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* If it's the first time we set rf buffer, allocate
+ * ah->ah_rf_banks based on ah->ah_rf_banks_size
+ * we set above */
+ if (ah->ah_rf_banks == NULL) {
+ ah->ah_rf_banks = kmalloc(sizeof(u32) * ah->ah_rf_banks_size,
+ GFP_KERNEL);
+ if (ah->ah_rf_banks == NULL) {
+ ATH5K_ERR(ah->ah_sc, "out of memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ /* Copy values to modify them */
+ rfb = ah->ah_rf_banks;
+
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) {
+ ATH5K_ERR(ah->ah_sc, "invalid bank\n");
+ return -EINVAL;
+ }
+
+ /* Bank changed, write down the offset */
+ if (bank != ini_rfb[i].rfb_bank) {
+ bank = ini_rfb[i].rfb_bank;
+ ah->ah_offset[bank] = i;
+ }
+
+ rfb[i] = ini_rfb[i].rfb_mode_data[mode];
+ }
+
+ /* Set Output and Driver bias current (OB/DB) */
+ if (channel->hw_value & CHANNEL_2GHZ) {
+
+ if (channel->hw_value & CHANNEL_CCK)
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ else
+ ee_mode = AR5K_EEPROM_MODE_11G;
+
+ /* For RF511X/RF211X combination we
+ * use b_OB and b_DB parameters stored
+ * in eeprom on ee->ee_ob[ee_mode][0]
+ *
+ * For all other chips we use OB/DB for 2Ghz
+ * stored in the b/g modal section just like
+ * 802.11a on ee->ee_ob[ee_mode][1] */
+ if ((ah->ah_radio == AR5K_RF5111) ||
+ (ah->ah_radio == AR5K_RF5112))
+ obdb = 0;
+ else
+ obdb = 1;
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_2GHZ, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_2GHZ, true);
+
+ /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */
+ } else if ((channel->hw_value & CHANNEL_5GHZ) ||
+ (ah->ah_radio == AR5K_RF5111)) {
+
+ /* For 11a, Turbo and XR we need to choose
+ * OB/DB based on frequency range */
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ obdb = channel->center_freq >= 5725 ? 3 :
+ (channel->center_freq >= 5500 ? 2 :
+ (channel->center_freq >= 5260 ? 1 :
+ (channel->center_freq > 4000 ? 0 : -1)));
+
+ if (obdb < 0)
+ return -EINVAL;
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb],
+ AR5K_RF_OB_5GHZ, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb],
+ AR5K_RF_DB_5GHZ, true);
+ }
+
+ g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+ /* Bank Modifications (chip-specific) */
+ if (ah->ah_radio == AR5K_RF5111) {
+
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value & CHANNEL_OFDM) {
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+ AR5K_PHY_FRAME_CTL_TX_CLIP,
+ g_step->gos_param[0]);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_90, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_84, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_RFGAIN_SEL, true);
+
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+
+ }
+
+ /* Bank 6/7 setup */
+
+ ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode],
+ AR5K_RF_PWD_XPD, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_PLO_SEL, true);
+
+ /* TODO: Half/quarter channel support */
+ }
+
+ if (ah->ah_radio == AR5K_RF5112) {
+
+ /* Set gain_F settings according to current step */
+ if (channel->hw_value & CHANNEL_OFDM) {
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0],
+ AR5K_RF_MIXGAIN_OVR, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1],
+ AR5K_RF_PWD_138, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2],
+ AR5K_RF_PWD_137, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3],
+ AR5K_RF_PWD_136, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4],
+ AR5K_RF_PWD_132, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5],
+ AR5K_RF_PWD_131, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6],
+ AR5K_RF_PWD_130, true);
+
+ /* We programmed gain_F parameters, switch back
+ * to active state */
+ ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE;
+ }
+
+ /* Bank 6/7 setup */
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
+ AR5K_RF_XPD_SEL, true);
+
+ if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) {
+ /* Rev. 1 supports only one xpd */
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_XPD_GAIN, true);
+
+ } else {
+ /* TODO: Set high and low gain bits */
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_PD_GAIN_LO, true);
+ ath5k_hw_rfb_op(ah, rf_regs,
+ ee->ee_x_gain[ee_mode],
+ AR5K_RF_PD_GAIN_HI, true);
+
+ /* Lower synth voltage on Rev 2 */
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_HIGH_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_MID_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_LOW_VC_CP, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 2,
+ AR5K_RF_PUSH_UP, true);
+
+ /* Decrease power consumption on 5213+ BaseBand */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PAD2GND, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB2_LVL, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_XB5_LVL, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_167, true);
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1,
+ AR5K_RF_PWD_166, true);
+ }
+ }
+
+ ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
+ AR5K_RF_GAIN_I, true);
+
+ /* TODO: Half/quarter channel support */
+
+ }
+
+ if (ah->ah_radio == AR5K_RF5413 &&
+ channel->hw_value & CHANNEL_2GHZ) {
+
+ ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE,
+ true);
+
+ /* Set optimum value for early revisions (on pci-e chips) */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+ ah->ah_mac_srev < AR5K_SREV_AR5413)
+ ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3),
+ AR5K_RF_PWD_ICLOBUF_2G, true);
+
+ }
+
+ /* Write RF banks on hw */
+ for (i = 0; i < ah->ah_rf_banks_size; i++) {
+ AR5K_REG_WAIT(i);
+ ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register);
+ }
+
+ return 0;
+}
+
+
+/**************************\
+ PHY/RF channel functions
+\**************************/
+
+/*
+ * Check if a channel is supported
+ */
+bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags)
+{
+ /* Check if the channel is in our supported range */
+ if (flags & CHANNEL_2GHZ) {
+ if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
+ (freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
+ return true;
+ } else if (flags & CHANNEL_5GHZ)
+ if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
+ (freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
+ return true;
+
+ return false;
+}
+
+/*
+ * Convertion needed for RF5110
+ */
+static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
+{
+ u32 athchan;
+
+ /*
+ * Convert IEEE channel/MHz to an internal channel value used
+ * by the AR5210 chipset. This has not been verified with
+ * newer chipsets like the AR5212A who have a completely
+ * different RF/PHY part.
+ */
+ athchan = (ath5k_hw_bitswap(
+ (ieee80211_frequency_to_channel(
+ channel->center_freq) - 24) / 2, 5)
+ << 1) | (1 << 6) | 0x1;
+ return athchan;
+}
+
+/*
+ * Set channel on RF5110
+ */
+static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data;
+
+ /*
+ * Set the channel and wait
+ */
+ data = ath5k_hw_rf5110_chan2athchan(channel);
+ ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0);
+ mdelay(1);
+
+ return 0;
+}
+
+/*
+ * Convertion needed for 5111
+ */
+static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
+ struct ath5k_athchan_2ghz *athchan)
+{
+ int channel;
+
+ /* Cast this value to catch negative channel numbers (>= -19) */
+ channel = (int)ieee;
+
+ /*
+ * Map 2GHz IEEE channel to 5GHz Atheros channel
+ */
+ if (channel <= 13) {
+ athchan->a2_athchan = 115 + channel;
+ athchan->a2_flags = 0x46;
+ } else if (channel == 14) {
+ athchan->a2_athchan = 124;
+ athchan->a2_flags = 0x44;
+ } else if (channel >= 15 && channel <= 26) {
+ athchan->a2_athchan = ((channel - 14) * 4) + 132;
+ athchan->a2_flags = 0x46;
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Set channel on 5111
+ */
+static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_athchan_2ghz ath5k_channel_2ghz;
+ unsigned int ath5k_channel =
+ ieee80211_frequency_to_channel(channel->center_freq);
+ u32 data0, data1, clock;
+ int ret;
+
+ /*
+ * Set the channel on the RF5111 radio
+ */
+ data0 = data1 = 0;
+
+ if (channel->hw_value & CHANNEL_2GHZ) {
+ /* Map 2GHz channel to 5GHz Atheros channel ID */
+ ret = ath5k_hw_rf5111_chan2athchan(
+ ieee80211_frequency_to_channel(channel->center_freq),
+ &ath5k_channel_2ghz);
+ if (ret)
+ return ret;
+
+ ath5k_channel = ath5k_channel_2ghz.a2_athchan;
+ data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff)
+ << 5) | (1 << 4);
+ }
+
+ if (ath5k_channel < 145 || !(ath5k_channel & 1)) {
+ clock = 1;
+ data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) |
+ (clock << 1) | (1 << 10) | 1;
+ } else {
+ clock = 0;
+ data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff)
+ << 2) | (clock << 1) | (1 << 10) | 1;
+ }
+
+ ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8),
+ AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00),
+ AR5K_RF_BUFFER_CONTROL_3);
+
+ return 0;
+}
+
+/*
+ * Set channel on 5112 and newer
+ */
+static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data, data0, data1, data2;
+ u16 c;
+
+ data = data0 = data1 = data2 = 0;
+ c = channel->center_freq;
+
+ if (c < 4800) {
+ if (!((c - 2224) % 5)) {
+ data0 = ((2 * (c - 704)) - 3040) / 10;
+ data1 = 1;
+ } else if (!((c - 2192) % 5)) {
+ data0 = ((2 * (c - 672)) - 3040) / 10;
+ data1 = 0;
+ } else
+ return -EINVAL;
+
+ data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
+ } else if ((c - (c % 5)) != 2 || c > 5435) {
+ if (!(c % 20) && c >= 5120) {
+ data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+ data2 = ath5k_hw_bitswap(3, 2);
+ } else if (!(c % 10)) {
+ data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+ data2 = ath5k_hw_bitswap(2, 2);
+ } else if (!(c % 5)) {
+ data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+ data2 = ath5k_hw_bitswap(1, 2);
+ } else
+ return -EINVAL;
+ } else {
+ data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+ data2 = ath5k_hw_bitswap(0, 2);
+ }
+
+ data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
+
+ ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+ return 0;
+}
+
+/*
+ * Set the channel on the RF2425
+ */
+static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 data, data0, data2;
+ u16 c;
+
+ data = data0 = data2 = 0;
+ c = channel->center_freq;
+
+ if (c < 4800) {
+ data0 = ath5k_hw_bitswap((c - 2272), 8);
+ data2 = 0;
+ /* ? 5GHz ? */
+ } else if ((c - (c % 5)) != 2 || c > 5435) {
+ if (!(c % 20) && c < 5120)
+ data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+ else if (!(c % 10))
+ data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+ else if (!(c % 5))
+ data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+ else
+ return -EINVAL;
+ data2 = ath5k_hw_bitswap(1, 2);
+ } else {
+ data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8);
+ data2 = ath5k_hw_bitswap(0, 2);
+ }
+
+ data = (data0 << 4) | data2 << 2 | 0x1001;
+
+ ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+ ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+ return 0;
+}
+
+/*
+ * Set a channel on the radio chip
+ */
+int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+{
+ int ret;
+ /*
+ * Check bounds supported by the PHY (we don't care about regultory
+ * restrictions at this point). Note: hw_value already has the band
+ * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok()
+ * of the band by that */
+ if (!ath5k_channel_ok(ah, channel->center_freq, channel->hw_value)) {
+ ATH5K_ERR(ah->ah_sc,
+ "channel frequency (%u MHz) out of supported "
+ "band range\n",
+ channel->center_freq);
+ return -EINVAL;
+ }
+
+ /*
+ * Set the channel and wait
+ */
+ switch (ah->ah_radio) {
+ case AR5K_RF5110:
+ ret = ath5k_hw_rf5110_channel(ah, channel);
+ break;
+ case AR5K_RF5111:
+ ret = ath5k_hw_rf5111_channel(ah, channel);
+ break;
+ case AR5K_RF2425:
+ ret = ath5k_hw_rf2425_channel(ah, channel);
+ break;
+ default:
+ ret = ath5k_hw_rf5112_channel(ah, channel);
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Set JAPAN setting for channel 14 */
+ if (channel->center_freq == 2484) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+ AR5K_PHY_CCKTXCTL_JAPAN);
+ } else {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL,
+ AR5K_PHY_CCKTXCTL_WORLD);
+ }
+
+ ah->ah_current_channel.center_freq = channel->center_freq;
+ ah->ah_current_channel.hw_value = channel->hw_value;
+ ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false;
+
+ return 0;
+}
+
+/*****************\
+ PHY calibration
+\*****************/
+
+/**
+ * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ * @freq: the channel frequency, just used for error logging
+ *
+ * This function performs a noise floor calibration of the PHY and waits for
+ * it to complete. Then the noise floor value is compared to some maximum
+ * noise floor we consider valid.
+ *
+ * Note that this is different from what the madwifi HAL does: it reads the
+ * noise floor and afterwards initiates the calibration. Since the noise floor
+ * calibration can take some time to finish, depending on the current channel
+ * use, that avoids the occasional timeout warnings we are seeing now.
+ *
+ * See the following link for an Atheros patent on noise floor calibration:
+ * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
+ * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
+ *
+ * XXX: Since during noise floor calibration antennas are detached according to
+ * the patent, we should stop tx queues here.
+ */
+int
+ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
+{
+ int ret;
+ unsigned int i;
+ s32 noise_floor;
+
+ /*
+ * Enable noise floor calibration
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_NF);
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_NF, 0, false);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc,
+ "noise floor calibration timeout (%uMHz)\n", freq);
+ return -EAGAIN;
+ }
+
+ /* Wait until the noise floor is calibrated and read the value */
+ for (i = 20; i > 0; i--) {
+ mdelay(1);
+ noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+ noise_floor = AR5K_PHY_NF_RVAL(noise_floor);
+ if (noise_floor & AR5K_PHY_NF_ACTIVE) {
+ noise_floor = AR5K_PHY_NF_AVAL(noise_floor);
+
+ if (noise_floor <= AR5K_TUNE_NOISE_FLOOR)
+ break;
+ }
+ }
+
+ ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+ "noise floor %d\n", noise_floor);
+
+ if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
+ ATH5K_ERR(ah->ah_sc,
+ "noise floor calibration failed (%uMHz)\n", freq);
+ return -EAGAIN;
+ }
+
+ ah->ah_noise_floor = noise_floor;
+
+ return 0;
+}
+
+/*
+ * Perform a PHY calibration on RF5110
+ * -Fix BPSK/QAM Constellation (I/Q correction)
+ * -Calculate Noise Floor
+ */
+static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 phy_sig, phy_agc, phy_sat, beacon;
+ int ret;
+
+ /*
+ * Disable beacons and RX/TX queues, wait
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210,
+ AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210);
+ beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
+ ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
+
+ mdelay(2);
+
+ /*
+ * Set the channel (with AGC turned off)
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+ udelay(10);
+ ret = ath5k_hw_channel(ah, channel);
+
+ /*
+ * Activate PHY and wait
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+ mdelay(1);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+ if (ret)
+ return ret;
+
+ /*
+ * Calibrate the radio chip
+ */
+
+ /* Remember normal state */
+ phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG);
+ phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE);
+ phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT);
+
+ /* Update radio registers */
+ ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) |
+ AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG);
+
+ ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI |
+ AR5K_PHY_AGCCOARSE_LO)) |
+ AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) |
+ AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE);
+
+ ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT |
+ AR5K_PHY_ADCSAT_THR)) |
+ AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) |
+ AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT);
+
+ udelay(20);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+ udelay(10);
+ ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+ mdelay(1);
+
+ /*
+ * Enable calibration and wait until completion
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL);
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, false);
+
+ /* Reset to normal state */
+ ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG);
+ ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE);
+ ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT);
+
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ return ret;
+ }
+
+ ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+
+ /*
+ * Re-enable RX/TX and beacons
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210,
+ AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210);
+ ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210);
+
+ return 0;
+}
+
+/*
+ * Perform a PHY calibration on RF5111/5112 and newer chips
+ */
+static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u32 i_pwr, q_pwr;
+ s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
+ int i;
+ ATH5K_TRACE(ah->ah_sc);
+
+ if (!ah->ah_calibration ||
+ ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
+ goto done;
+
+ /* Calibration has finished, get the results and re-run */
+ for (i = 0; i <= 10; i++) {
+ iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
+ i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
+ q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+ }
+
+ i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
+ q_coffd = q_pwr >> 7;
+
+ /* No correction */
+ if (i_coffd == 0 || q_coffd == 0)
+ goto done;
+
+ i_coff = ((-iq_corr) / i_coffd) & 0x3f;
+
+ /* Boundary check */
+ if (i_coff > 31)
+ i_coff = 31;
+ if (i_coff < -32)
+ i_coff = -32;
+
+ q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f;
+
+ /* Boundary check */
+ if (q_coff > 15)
+ q_coff = 15;
+ if (q_coff < -16)
+ q_coff = -16;
+
+ /* Commit new I/Q value */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
+ ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+
+ /* Re-enable calibration -if we don't we'll commit
+ * the same values again and again */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN);
+
+done:
+
+ /* TODO: Separate noise floor calibration from I/Q calibration
+ * since noise floor calibration interrupts rx path while I/Q
+ * calibration doesn't. We don't need to run noise floor calibration
+ * as often as I/Q calibration.*/
+ ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+
+ /* Initiate a gain_F calibration */
+ ath5k_hw_request_rfgain_probe(ah);
+
+ return 0;
+}
+
+/*
+ * Perform a PHY calibration
+ */
+int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ int ret;
+
+ if (ah->ah_radio == AR5K_RF5110)
+ ret = ath5k_hw_rf5110_calibrate(ah, channel);
+ else
+ ret = ath5k_hw_rf511x_calibrate(ah, channel);
+
+ return ret;
+}
+
+int ath5k_hw_phy_disable(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*Just a try M.F.*/
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+
+ return 0;
+}
+
+/********************\
+ Misc PHY functions
+\********************/
+
+/*
+ * Get the PHY Chip revision
+ */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
+{
+ unsigned int i;
+ u32 srev;
+ u16 ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Set the radio chip access register
+ */
+ switch (chan) {
+ case CHANNEL_2GHZ:
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
+ break;
+ case CHANNEL_5GHZ:
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+ break;
+ default:
+ return 0;
+ }
+
+ mdelay(2);
+
+ /* ...wait until PHY is ready and read the selected radio revision */
+ ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
+
+ for (i = 0; i < 8; i++)
+ ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20));
+
+ if (ah->ah_version == AR5K_AR5210) {
+ srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf;
+ ret = (u16)ath5k_hw_bitswap(srev, 4) + 1;
+ } else {
+ srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff;
+ ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) |
+ ((srev & 0x0f) << 4), 8);
+ }
+
+ /* Reset to the 5GHz mode */
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+ return ret;
+}
+
+void /*TODO:Boundary check*/
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*Just a try M.F.*/
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA);
+}
+
+unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ /*Just a try M.F.*/
+ if (ah->ah_version != AR5K_AR5210)
+ return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+ return false; /*XXX: What do we return for 5210 ?*/
+}
+
+
+/****************\
+* TX power setup *
+\****************/
+
+/*
+ * Helper functions
+ */
+
+/*
+ * Do linear interpolation between two given (x, y) points
+ */
+static s16
+ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
+ s16 y_left, s16 y_right)
+{
+ s16 ratio, result;
+
+ /* Avoid divide by zero and skip interpolation
+ * if we have the same point */
+ if ((x_left == x_right) || (y_left == y_right))
+ return y_left;
+
+ /*
+ * Since we use ints and not fps, we need to scale up in
+ * order to get a sane ratio value (or else we 'll eg. get
+ * always 1 instead of 1.25, 1.75 etc). We scale up by 100
+ * to have some accuracy both for 0.5 and 0.25 steps.
+ */
+ ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left));
+
+ /* Now scale down to be in range */
+ result = y_left + (ratio * (target - x_left) / 100);
+
+ return result;
+}
+
+/*
+ * Find vertical boundary (min pwr) for the linear PCDAC curve.
+ *
+ * Since we have the top of the curve and we draw the line below
+ * until we reach 1 (1 pcdac step) we need to know which point
+ * (x value) that is so that we don't go below y axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeroes.
+ */
+static s16
+ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
+ const s16 *pwrL, const s16 *pwrR)
+{
+ s8 tmp;
+ s16 min_pwrL, min_pwrR;
+ s16 pwr_i = pwrL[0];
+
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrL[0], pwrL[1],
+ stepL[0], stepL[1]);
+
+ } while (tmp > 1);
+
+ min_pwrL = pwr_i;
+
+ pwr_i = pwrR[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrR[0], pwrR[1],
+ stepR[0], stepR[1]);
+
+ } while (tmp > 1);
+
+ min_pwrR = pwr_i;
+
+ /* Keep the right boundary so that it works for both curves */
+ return max(min_pwrL, min_pwrR);
+}
+
+/*
+ * Interpolate (pwr,vpd) points to create a Power to PDADC or a
+ * Power to PCDAC curve.
+ *
+ * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC
+ * steps (offsets) on y axis. Power can go up to 31.5dB and max
+ * PCDAC/PDADC step for each curve is 64 but we can write more than
+ * one curves on hw so we can go up to 128 (which is the max step we
+ * can write on the final table).
+ *
+ * We write y values (PCDAC/PDADC steps) on hw.
+ */
+static void
+ath5k_create_power_curve(s16 pmin, s16 pmax,
+ const s16 *pwr, const u8 *vpd,
+ u8 num_points,
+ u8 *vpd_table, u8 type)
+{
+ u8 idx[2] = { 0, 1 };
+ s16 pwr_i = 2*pmin;
+ int i;
+
+ if (num_points < 2)
+ return;
+
+ /* We want the whole line, so adjust boundaries
+ * to cover the entire power range. Note that
+ * power values are already 0.25dB so no need
+ * to multiply pwr_i by 2 */
+ if (type == AR5K_PWRTABLE_LINEAR_PCDAC) {
+ pwr_i = pmin;
+ pmin = 0;
+ pmax = 63;
+ }
+
+ /* Find surrounding turning points (TPs)
+ * and interpolate between them */
+ for (i = 0; (i <= (u16) (pmax - pmin)) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+
+ /* We passed the right TP, move to the next set of TPs
+ * if we pass the last TP, extrapolate above using the last
+ * two TPs for ratio */
+ if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) {
+ idx[0]++;
+ idx[1]++;
+ }
+
+ vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i,
+ pwr[idx[0]], pwr[idx[1]],
+ vpd[idx[0]], vpd[idx[1]]);
+
+ /* Increase by 0.5dB
+ * (0.25 dB units) */
+ pwr_i += 2;
+ }
+}
+
+/*
+ * Get the surrounding per-channel power calibration piers
+ * for a given frequency so that we can interpolate between
+ * them and come up with an apropriate dataset for our current
+ * channel.
+ */
+static void
+ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_chan_pcal_info **pcinfo_l,
+ struct ath5k_chan_pcal_info **pcinfo_r)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_chan_pcal_info *pcinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ if (!(channel->hw_value & CHANNEL_OFDM)) {
+ pcinfo = ee->ee_pwr_cal_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ } else if (channel->hw_value & CHANNEL_2GHZ) {
+ pcinfo = ee->ee_pwr_cal_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ } else {
+ pcinfo = ee->ee_pwr_cal_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ }
+ max = ee->ee_n_piers[mode] - 1;
+
+ /* Frequency is below our calibrated
+ * range. Use the lowest power curve
+ * we have */
+ if (target < pcinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ /* Frequency is above our calibrated
+ * range. Use the highest power curve
+ * we have */
+ if (target > pcinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ /* Frequency is inside our calibrated
+ * channel range. Pick the surrounding
+ * calibration piers so that we can
+ * interpolate */
+ for (i = 0; i <= max; i++) {
+
+ /* Frequency matches one of our calibration
+ * piers, no need to interpolate, just use
+ * that calibration pier */
+ if (pcinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ /* We found a calibration pier that's above
+ * frequency, use this pier and the previous
+ * one to interpolate */
+ if (target < pcinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ *pcinfo_l = &pcinfo[idx_l];
+ *pcinfo_r = &pcinfo[idx_r];
+
+ return;
+}
+
+/*
+ * Get the surrounding per-rate power calibration data
+ * for a given frequency and interpolate between power
+ * values to set max target power supported by hw for
+ * each rate.
+ */
+static void
+ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ struct ath5k_rate_pcal_info *rates)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_rate_pcal_info *rpinfo;
+ u8 idx_l, idx_r;
+ u8 mode, max, i;
+ u32 target = channel->center_freq;
+
+ idx_l = 0;
+ idx_r = 0;
+
+ if (!(channel->hw_value & CHANNEL_OFDM)) {
+ rpinfo = ee->ee_rate_tpwr_b;
+ mode = AR5K_EEPROM_MODE_11B;
+ } else if (channel->hw_value & CHANNEL_2GHZ) {
+ rpinfo = ee->ee_rate_tpwr_g;
+ mode = AR5K_EEPROM_MODE_11G;
+ } else {
+ rpinfo = ee->ee_rate_tpwr_a;
+ mode = AR5K_EEPROM_MODE_11A;
+ }
+ max = ee->ee_rate_target_pwr_num[mode] - 1;
+
+ /* Get the surrounding calibration
+ * piers - same as above */
+ if (target < rpinfo[0].freq) {
+ idx_l = idx_r = 0;
+ goto done;
+ }
+
+ if (target > rpinfo[max].freq) {
+ idx_l = idx_r = max;
+ goto done;
+ }
+
+ for (i = 0; i <= max; i++) {
+
+ if (rpinfo[i].freq == target) {
+ idx_l = idx_r = i;
+ goto done;
+ }
+
+ if (target < rpinfo[i].freq) {
+ idx_r = i;
+ idx_l = idx_r - 1;
+ goto done;
+ }
+ }
+
+done:
+ /* Now interpolate power value, based on the frequency */
+ rates->freq = target;
+
+ rates->target_power_6to24 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_6to24,
+ rpinfo[idx_r].target_power_6to24);
+
+ rates->target_power_36 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_36,
+ rpinfo[idx_r].target_power_36);
+
+ rates->target_power_48 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_48,
+ rpinfo[idx_r].target_power_48);
+
+ rates->target_power_54 =
+ ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+ rpinfo[idx_r].freq,
+ rpinfo[idx_l].target_power_54,
+ rpinfo[idx_r].target_power_54);
+}
+
+/*
+ * Get the max edge power for this channel if
+ * we have such data from EEPROM's Conformance Test
+ * Limits (CTL), and limit max power if needed.
+ *
+ * FIXME: Only works for world regulatory domains
+ */
+static void
+ath5k_get_max_ctl_power(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ struct ath5k_edge_power *rep = ee->ee_ctl_pwr;
+ u8 *ctl_val = ee->ee_ctl;
+ s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4;
+ s16 edge_pwr = 0;
+ u8 rep_idx;
+ u8 i, ctl_mode;
+ u8 ctl_idx = 0xFF;
+ u32 target = channel->center_freq;
+
+ /* Find out a CTL for our mode that's not mapped
+ * on a specific reg domain.
+ *
+ * TODO: Map our current reg domain to one of the 3 available
+ * reg domain ids so that we can support more CTLs. */
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_G:
+ ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_B:
+ ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_T:
+ ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_TG:
+ ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+ break;
+ case CHANNEL_XR:
+ /* Fall through */
+ default:
+ return;
+ }
+
+ for (i = 0; i < ee->ee_ctls; i++) {
+ if (ctl_val[i] == ctl_mode) {
+ ctl_idx = i;
+ break;
+ }
+ }
+
+ /* If we have a CTL dataset available grab it and find the
+ * edge power for our frequency */
+ if (ctl_idx == 0xFF)
+ return;
+
+ /* Edge powers are sorted by frequency from lower
+ * to higher. Each CTL corresponds to 8 edge power
+ * measurements. */
+ rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES;
+
+ /* Don't do boundaries check because we
+ * might have more that one bands defined
+ * for this mode */
+
+ /* Get the edge power that's closer to our
+ * frequency */
+ for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) {
+ rep_idx += i;
+ if (target <= rep[rep_idx].freq)
+ edge_pwr = (s16) rep[rep_idx].edge;
+ }
+
+ if (edge_pwr)
+ ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr);
+}
+
+
+/*
+ * Power to PCDAC table functions
+ */
+
+/*
+ * Fill Power to PCDAC table on RF5111
+ *
+ * No further processing is needed for RF5111, the only thing we have to
+ * do is fill the values below and above calibration range since eeprom data
+ * may not cover the entire PCDAC table.
+ */
+static void
+ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_tmp = ah->ah_txpower.tmpL[0];
+ u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i;
+ s16 min_pwr, max_pwr;
+
+ /* Get table boundaries */
+ min_pwr = table_min[0];
+ pcdac_0 = pcdac_tmp[0];
+
+ max_pwr = table_max[0];
+ pcdac_n = pcdac_tmp[table_max[0] - table_min[0]];
+
+ /* Extrapolate below minimum using pcdac_0 */
+ pcdac_i = 0;
+ for (i = 0; i < min_pwr; i++)
+ pcdac_out[pcdac_i++] = pcdac_0;
+
+ /* Copy values from pcdac_tmp */
+ pwr_idx = min_pwr;
+ for (i = 0 ; pwr_idx <= max_pwr &&
+ pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+ pcdac_out[pcdac_i++] = pcdac_tmp[i];
+ pwr_idx++;
+ }
+
+ /* Extrapolate above maximum */
+ while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE)
+ pcdac_out[pcdac_i++] = pcdac_n;
+
+}
+
+/*
+ * Combine available XPD Curves and fill Linear Power to PCDAC table
+ * on RF5112
+ *
+ * RFX112 can have up to 2 curves (one for low txpower range and one for
+ * higher txpower range). We need to put them both on pcdac_out and place
+ * them in the correct location. In case we only have one curve available
+ * just fit it on pcdac_out (it's supposed to cover the entire range of
+ * available pwr levels since it's always the higher power curve). Extrapolate
+ * below and above final table if needed.
+ */
+static void
+ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
+ s16 *table_max, u8 pdcurves)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ u8 *pcdac_low_pwr;
+ u8 *pcdac_high_pwr;
+ u8 *pcdac_tmp;
+ u8 pwr;
+ s16 max_pwr_idx;
+ s16 min_pwr_idx;
+ s16 mid_pwr_idx = 0;
+ /* Edge flag turs on the 7nth bit on the PCDAC
+ * to delcare the higher power curve (force values
+ * to be greater than 64). If we only have one curve
+ * we don't need to set this, if we have 2 curves and
+ * fill the table backwards this can also be used to
+ * switch from higher power curve to lower power curve */
+ u8 edge_flag;
+ int i;
+
+ /* When we have only one curve available
+ * that's the higher power curve. If we have
+ * two curves the first is the high power curve
+ * and the next is the low power curve. */
+ if (pdcurves > 1) {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1];
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ mid_pwr_idx = table_max[1] - table_min[1] - 1;
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+
+ /* If table size goes beyond 31.5dB, keep the
+ * upper 31.5dB range when setting tx power.
+ * Note: 126 = 31.5 dB in quarter dB steps */
+ if (table_max[0] - table_min[1] > 126)
+ min_pwr_idx = table_max[0] - 126;
+ else
+ min_pwr_idx = table_min[1];
+
+ /* Since we fill table backwards
+ * start from high power curve */
+ pcdac_tmp = pcdac_high_pwr;
+
+ edge_flag = 0x40;
+#if 0
+ /* If both min and max power limits are in lower
+ * power curve's range, only use the low power curve.
+ * TODO: min/max levels are related to target
+ * power values requested from driver/user
+ * XXX: Is this really needed ? */
+ if (min_pwr < table_max[1] &&
+ max_pwr < table_max[1]) {
+ edge_flag = 0;
+ pcdac_tmp = pcdac_low_pwr;
+ max_pwr_idx = (table_max[1] - table_min[1])/2;
+ }
+#endif
+ } else {
+ pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */
+ pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+ min_pwr_idx = table_min[0];
+ max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+ pcdac_tmp = pcdac_high_pwr;
+ edge_flag = 0;
+ }
+
+ /* This is used when setting tx power*/
+ ah->ah_txpower.txp_min_idx = min_pwr_idx/2;
+
+ /* Fill Power to PCDAC table backwards */
+ pwr = max_pwr_idx;
+ for (i = 63; i >= 0; i--) {
+ /* Entering lower power range, reset
+ * edge flag and set pcdac_tmp to lower
+ * power curve.*/
+ if (edge_flag == 0x40 &&
+ (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+ edge_flag = 0x00;
+ pcdac_tmp = pcdac_low_pwr;
+ pwr = mid_pwr_idx/2;
+ }
+
+ /* Don't go below 1, extrapolate below if we have
+ * already swithced to the lower power curve -or
+ * we only have one curve and edge_flag is zero
+ * anyway */
+ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) {
+ while (i >= 0) {
+ pcdac_out[i] = pcdac_out[i + 1];
+ i--;
+ }
+ break;
+ }
+
+ pcdac_out[i] = pcdac_tmp[pwr] | edge_flag;
+
+ /* Extrapolate above if pcdac is greater than
+ * 126 -this can happen because we OR pcdac_out
+ * value with edge_flag on high power curve */
+ if (pcdac_out[i] > 126)
+ pcdac_out[i] = 126;
+
+ /* Decrease by a 0.5dB step */
+ pwr--;
+ }
+}
+
+/* Write PCDAC values on hw */
+static void
+ath5k_setup_pcdac_table(struct ath5k_hw *ah)
+{
+ u8 *pcdac_out = ah->ah_txpower.txp_pd_table;
+ int i;
+
+ /*
+ * Write TX power values
+ */
+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+ ath5k_hw_reg_write(ah,
+ (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) |
+ (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16),
+ AR5K_PHY_PCDAC_TXPOWER(i));
+ }
+}
+
+
+/*
+ * Power to PDADC table functions
+ */
+
+/*
+ * Set the gain boundaries and create final Power to PDADC table
+ *
+ * We can have up to 4 pd curves, we need to do a simmilar process
+ * as we do for RF5112. This time we don't have an edge_flag but we
+ * set the gain boundaries on a separate register.
+ */
+static void
+ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
+ s16 *pwr_min, s16 *pwr_max, u8 pdcurves)
+{
+ u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS];
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u8 *pdadc_tmp;
+ s16 pdadc_0;
+ u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size;
+ u8 pd_gain_overlap;
+
+ /* Note: Register value is initialized on initvals
+ * there is no feedback from hw.
+ * XXX: What about pd_gain_overlap from EEPROM ? */
+ pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
+
+ /* Create final PDADC table */
+ for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) {
+ pdadc_tmp = ah->ah_txpower.tmpL[pdg];
+
+ if (pdg == pdcurves - 1)
+ /* 2 dB boundary stretch for last
+ * (higher power) curve */
+ gain_boundaries[pdg] = pwr_max[pdg] + 4;
+ else
+ /* Set gain boundary in the middle
+ * between this curve and the next one */
+ gain_boundaries[pdg] =
+ (pwr_max[pdg] + pwr_min[pdg + 1]) / 2;
+
+ /* Sanity check in case our 2 db stretch got out of
+ * range. */
+ if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER)
+ gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER;
+
+ /* For the first curve (lower power)
+ * start from 0 dB */
+ if (pdg == 0)
+ pdadc_0 = 0;
+ else
+ /* For the other curves use the gain overlap */
+ pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) -
+ pd_gain_overlap;
+
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1)
+ pwr_step = pdadc_tmp[1] - pdadc_tmp[0];
+ else
+ pwr_step = 1;
+
+ /* If pdadc_0 is negative, we need to extrapolate
+ * below this pdgain by a number of pwr_steps */
+ while ((pdadc_0 < 0) && (pdadc_i < 128)) {
+ s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp;
+ pdadc_0++;
+ }
+
+ /* Set last pwr level, using gain boundaries */
+ pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg];
+ /* Limit it to be inside pwr range */
+ table_size = pwr_max[pdg] - pwr_min[pdg];
+ max_idx = (pdadc_n < table_size) ? pdadc_n : table_size;
+
+ /* Fill pdadc_out table */
+ while (pdadc_0 < max_idx)
+ pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++];
+
+ /* Need to extrapolate above this pdgain? */
+ if (pdadc_n <= max_idx)
+ continue;
+
+ /* Force each power step to be at least 0.5 dB */
+ if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1)
+ pwr_step = pdadc_tmp[table_size - 1] -
+ pdadc_tmp[table_size - 2];
+ else
+ pwr_step = 1;
+
+ /* Extrapolate above */
+ while ((pdadc_0 < (s16) pdadc_n) &&
+ (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) {
+ s16 tmp = pdadc_tmp[table_size - 1] +
+ (pdadc_0 - max_idx) * pwr_step;
+ pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp;
+ pdadc_0++;
+ }
+ }
+
+ while (pdg < AR5K_EEPROM_N_PD_GAINS) {
+ gain_boundaries[pdg] = gain_boundaries[pdg - 1];
+ pdg++;
+ }
+
+ while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) {
+ pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1];
+ pdadc_i++;
+ }
+
+ /* Set gain boundaries */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(pd_gain_overlap,
+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
+ AR5K_REG_SM(gain_boundaries[0],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
+ AR5K_REG_SM(gain_boundaries[1],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
+ AR5K_REG_SM(gain_boundaries[2],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
+ AR5K_REG_SM(gain_boundaries[3],
+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
+ AR5K_PHY_TPC_RG5);
+
+ /* Used for setting rate power table */
+ ah->ah_txpower.txp_min_idx = pwr_min[0];
+
+}
+
+/* Write PDADC values on hw */
+static void
+ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah,
+ u8 pdcurves, u8 *pdg_to_idx)
+{
+ u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+ u32 reg;
+ u8 i;
+
+ /* Select the right pdgain curves */
+
+ /* Clear current settings */
+ reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
+ reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
+ AR5K_PHY_TPC_RG1_PDGAIN_2 |
+ AR5K_PHY_TPC_RG1_PDGAIN_3 |
+ AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
+ /*
+ * Use pd_gains curve from eeprom
+ *
+ * This overrides the default setting from initvals
+ * in case some vendors (e.g. Zcomax) don't use the default
+ * curves. If we don't honor their settings we 'll get a
+ * 5dB (1 * gain overlap ?) drop.
+ */
+ reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
+ switch (pdcurves) {
+ case 3:
+ reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
+ /* Fall through */
+ case 2:
+ reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
+ /* Fall through */
+ case 1:
+ reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
+ break;
+ }
+ ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
+
+ /*
+ * Write TX power values
+ */
+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+ ath5k_hw_reg_write(ah,
+ ((pdadc_out[4*i + 0] & 0xff) << 0) |
+ ((pdadc_out[4*i + 1] & 0xff) << 8) |
+ ((pdadc_out[4*i + 2] & 0xff) << 16) |
+ ((pdadc_out[4*i + 3] & 0xff) << 24),
+ AR5K_PHY_PDADC_TXPOWER(i));
+ }
+}
+
+
+/*
+ * Common code for PCDAC/PDADC tables
+ */
+
+/*
+ * This is the main function that uses all of the above
+ * to set PCDAC/PDADC table on hw for the current channel.
+ * This table is used for tx power calibration on the basband,
+ * without it we get weird tx power levels and in some cases
+ * distorted spectral mask
+ */
+static int
+ath5k_setup_channel_powertable(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ u8 ee_mode, u8 type)
+{
+ struct ath5k_pdgain_info *pdg_L, *pdg_R;
+ struct ath5k_chan_pcal_info *pcinfo_L;
+ struct ath5k_chan_pcal_info *pcinfo_R;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ s16 table_min[AR5K_EEPROM_N_PD_GAINS];
+ s16 table_max[AR5K_EEPROM_N_PD_GAINS];
+ u8 *tmpL;
+ u8 *tmpR;
+ u32 target = channel->center_freq;
+ int pdg, i;
+
+ /* Get surounding freq piers for this channel */
+ ath5k_get_chan_pcal_surrounding_piers(ah, channel,
+ &pcinfo_L,
+ &pcinfo_R);
+
+ /* Loop over pd gain curves on
+ * surounding freq piers by index */
+ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
+
+ /* Fill curves in reverse order
+ * from lower power (max gain)
+ * to higher power. Use curve -> idx
+ * backmaping we did on eeprom init */
+ u8 idx = pdg_curve_to_idx[pdg];
+
+ /* Grab the needed curves by index */
+ pdg_L = &pcinfo_L->pd_curves[idx];
+ pdg_R = &pcinfo_R->pd_curves[idx];
+
+ /* Initialize the temp tables */
+ tmpL = ah->ah_txpower.tmpL[pdg];
+ tmpR = ah->ah_txpower.tmpR[pdg];
+
+ /* Set curve's x boundaries and create
+ * curves so that they cover the same
+ * range (if we don't do that one table
+ * will have values on some range and the
+ * other one won't have any so interpolation
+ * will fail) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]) / 2;
+
+ table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2;
+
+ /* Now create the curves on surrounding channels
+ * and interpolate if needed to get the final
+ * curve for this gain on this channel */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* Override min/max so that we don't loose
+ * accuracy (don't divide by 2) */
+ table_min[pdg] = min(pdg_L->pd_pwr[0],
+ pdg_R->pd_pwr[0]);
+
+ table_max[pdg] =
+ max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+ pdg_R->pd_pwr[pdg_R->pd_points - 1]);
+
+ /* Override minimum so that we don't get
+ * out of bounds while extrapolating
+ * below. Don't do this when we have 2
+ * curves and we are on the high power curve
+ * because table_min is ok in this case */
+ if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) {
+
+ table_min[pdg] =
+ ath5k_get_linear_pcdac_min(pdg_L->pd_step,
+ pdg_R->pd_step,
+ pdg_L->pd_pwr,
+ pdg_R->pd_pwr);
+
+ /* Don't go too low because we will
+ * miss the upper part of the curve.
+ * Note: 126 = 31.5dB (max power supported)
+ * in 0.25dB units */
+ if (table_max[pdg] - table_min[pdg] > 126)
+ table_min[pdg] = table_max[pdg] - 126;
+ }
+
+ /* Fall through */
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_L->pd_pwr,
+ pdg_L->pd_step,
+ pdg_L->pd_points, tmpL, type);
+
+ /* We are in a calibration
+ * pier, no need to interpolate
+ * between freq piers */
+ if (pcinfo_L == pcinfo_R)
+ continue;
+
+ ath5k_create_power_curve(table_min[pdg],
+ table_max[pdg],
+ pdg_R->pd_pwr,
+ pdg_R->pd_step,
+ pdg_R->pd_points, tmpR, type);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Interpolate between curves
+ * of surounding freq piers to
+ * get the final curve for this
+ * pd gain. Re-use tmpL for interpolation
+ * output */
+ for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) &&
+ (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+ tmpL[i] = (u8) ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ (s16) tmpL[i],
+ (s16) tmpR[i]);
+ }
+ }
+
+ /* Now we have a set of curves for this
+ * channel on tmpL (x range is table_max - table_min
+ * and y values are tmpL[pdg][]) sorted in the same
+ * order as EEPROM (because we've used the backmaping).
+ * So for RF5112 it's from higher power to lower power
+ * and for RF2413 it's from lower power to higher power.
+ * For RF5111 we only have one curve. */
+
+ /* Fill min and max power levels for this
+ * channel by interpolating the values on
+ * surounding channels to complete the dataset */
+ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->min_pwr, pcinfo_R->min_pwr);
+
+ ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target,
+ (s16) pcinfo_L->freq,
+ (s16) pcinfo_R->freq,
+ pcinfo_L->max_pwr, pcinfo_R->max_pwr);
+
+ /* We are ready to go, fill PCDAC/PDADC
+ * table and write settings on hardware */
+ switch (type) {
+ case AR5K_PWRTABLE_LINEAR_PCDAC:
+ /* For RF5112 we can have one or two curves
+ * and each curve covers a certain power lvl
+ * range so we need to do some more processing */
+ ath5k_combine_linear_pcdac_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Set txp.offset so that we can
+ * match max power value with max
+ * table index */
+ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2);
+
+ /* Write settings on hw */
+ ath5k_setup_pcdac_table(ah);
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PCDAC:
+ /* We are done for RF5111 since it has only
+ * one curve, just fit the curve on the table */
+ ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max);
+
+ /* No rate powertable adjustment for RF5111 */
+ ah->ah_txpower.txp_min_idx = 0;
+ ah->ah_txpower.txp_offset = 0;
+
+ /* Write settings on hw */
+ ath5k_setup_pcdac_table(ah);
+ break;
+ case AR5K_PWRTABLE_PWR_TO_PDADC:
+ /* Set PDADC boundaries and fill
+ * final PDADC table */
+ ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max,
+ ee->ee_pd_gains[ee_mode]);
+
+ /* Write settings on hw */
+ ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx);
+
+ /* Set txp.offset, note that table_min
+ * can be negative */
+ ah->ah_txpower.txp_offset = table_min[0];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/*
+ * Per-rate tx power setting
+ *
+ * This is the code that sets the desired tx power (below
+ * maximum) on hw for each rate (we also have TPC that sets
+ * power per packet). We do that by providing an index on the
+ * PCDAC/PDADC table we set up.
+ */
+
+/*
+ * Set rate power table
+ *
+ * For now we only limit txpower based on maximum tx power
+ * supported by hw (what's inside rate_info). We need to limit
+ * this even more, based on regulatory domain etc.
+ *
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps)
+ * and is indexed as follows:
+ * rates[0] - rates[7] -> OFDM rates
+ * rates[8] - rates[14] -> CCK rates
+ * rates[15] -> XR rates (they all have the same power)
+ */
+static void
+ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
+ struct ath5k_rate_pcal_info *rate_info,
+ u8 ee_mode)
+{
+ unsigned int i;
+ u16 *rates;
+
+ /* max_pwr is power level we got from driver/user in 0.5dB
+ * units, switch to 0.25dB units so we can compare */
+ max_pwr *= 2;
+ max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2;
+
+ /* apply rate limits */
+ rates = ah->ah_txpower.txp_rates_power_table;
+
+ /* OFDM rates 6 to 24Mb/s */
+ for (i = 0; i < 5; i++)
+ rates[i] = min(max_pwr, rate_info->target_power_6to24);
+
+ /* Rest OFDM rates */
+ rates[5] = min(rates[0], rate_info->target_power_36);
+ rates[6] = min(rates[0], rate_info->target_power_48);
+ rates[7] = min(rates[0], rate_info->target_power_54);
+
+ /* CCK rates */
+ /* 1L */
+ rates[8] = min(rates[0], rate_info->target_power_6to24);
+ /* 2L */
+ rates[9] = min(rates[0], rate_info->target_power_36);
+ /* 2S */
+ rates[10] = min(rates[0], rate_info->target_power_36);
+ /* 5L */
+ rates[11] = min(rates[0], rate_info->target_power_48);
+ /* 5S */
+ rates[12] = min(rates[0], rate_info->target_power_48);
+ /* 11L */
+ rates[13] = min(rates[0], rate_info->target_power_54);
+ /* 11S */
+ rates[14] = min(rates[0], rate_info->target_power_54);
+
+ /* XR rates */
+ rates[15] = min(rates[0], rate_info->target_power_6to24);
+
+ /* CCK rates have different peak to average ratio
+ * so we have to tweak their power so that gainf
+ * correction works ok. For this we use OFDM to
+ * CCK delta from eeprom */
+ if ((ee_mode == AR5K_EEPROM_MODE_11G) &&
+ (ah->ah_phy_revision < AR5K_SREV_PHY_5212A))
+ for (i = 8; i <= 15; i++)
+ rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
+
+ ah->ah_txpower.txp_min_pwr = rates[7];
+ ah->ah_txpower.txp_max_pwr = rates[0];
+ ah->ah_txpower.txp_ofdm = rates[7];
+}
+
+
+/*
+ * Set transmition power
+ */
+int
+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+ u8 ee_mode, u8 txpower)
+{
+ struct ath5k_rate_pcal_info rate_info;
+ u8 type;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+ if (txpower > AR5K_TUNE_MAX_TXPOWER) {
+ ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
+ return -EINVAL;
+ }
+ if (txpower == 0)
+ txpower = AR5K_TUNE_DEFAULT_TXPOWER;
+
+ /* Reset TX power values */
+ memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+ ah->ah_txpower.txp_min_pwr = 0;
+ ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER;
+
+ /* Initialize TX power table */
+ switch (ah->ah_radio) {
+ case AR5K_RF5111:
+ type = AR5K_PWRTABLE_PWR_TO_PCDAC;
+ break;
+ case AR5K_RF5112:
+ type = AR5K_PWRTABLE_LINEAR_PCDAC;
+ break;
+ case AR5K_RF2413:
+ case AR5K_RF5413:
+ case AR5K_RF2316:
+ case AR5K_RF2317:
+ case AR5K_RF2425:
+ type = AR5K_PWRTABLE_PWR_TO_PDADC;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* FIXME: Only on channel/mode change */
+ ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type);
+ if (ret)
+ return ret;
+
+ /* Limit max power if we have a CTL available */
+ ath5k_get_max_ctl_power(ah, channel);
+
+ /* FIXME: Tx power limit for this regdomain
+ * XXX: Mac80211/CRDA will do that anyway ? */
+
+ /* FIXME: Antenna reduction stuff */
+
+ /* FIXME: Limit power on turbo modes */
+
+ /* FIXME: TPC scale reduction */
+
+ /* Get surounding channels for per-rate power table
+ * calibration */
+ ath5k_get_rate_pcal_data(ah, channel, &rate_info);
+
+ /* Setup rate power table */
+ ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode);
+
+ /* Write rate power table on hw */
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
+ AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) |
+ AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) |
+ AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) |
+ AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) |
+ AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) |
+ AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3);
+
+ ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) |
+ AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
+ AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
+
+ /* FIXME: TPC support */
+ if (ah->ah_txpower.txp_tpc) {
+ ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
+ AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
+ AR5K_TPC);
+ } else {
+ ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
+ AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+ }
+
+ return 0;
+}
+
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+{
+ /*Just a try M.F.*/
+ struct ieee80211_channel *channel = &ah->ah_current_channel;
+
+ ATH5K_TRACE(ah->ah_sc);
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
+ "changing txpower to %d\n", txpower);
+
+ return ath5k_hw_txpower(ah, channel, mode, txpower);
+}
+
+#undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
new file mode 100644
index 000000000000..5094c394a4b2
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -0,0 +1,546 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/********************************************\
+Queue Control Unit, DFS Control Unit Functions
+\********************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Get properties for a transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+ struct ath5k_txq_info *queue_info)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+ return 0;
+}
+
+/*
+ * Set properties for a transmit queue
+ */
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+ const struct ath5k_txq_info *queue_info)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return -EIO;
+
+ memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
+
+ /*XXX: Is this supported on 5210 ?*/
+ if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
+ ((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
+ (queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
+ queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
+ ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+ return 0;
+}
+
+/*
+ * Initialize a transmit queue
+ */
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+ struct ath5k_txq_info *queue_info)
+{
+ unsigned int queue;
+ int ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /*
+ * Get queue by type
+ */
+ /*5210 only has 2 queues*/
+ if (ah->ah_version == AR5K_AR5210) {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (queue_type) {
+ case AR5K_TX_QUEUE_DATA:
+ for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
+ ah->ah_txq[queue].tqi_type !=
+ AR5K_TX_QUEUE_INACTIVE; queue++) {
+
+ if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
+ return -EINVAL;
+ }
+ break;
+ case AR5K_TX_QUEUE_UAPSD:
+ queue = AR5K_TX_QUEUE_ID_UAPSD;
+ break;
+ case AR5K_TX_QUEUE_BEACON:
+ queue = AR5K_TX_QUEUE_ID_BEACON;
+ break;
+ case AR5K_TX_QUEUE_CAB:
+ queue = AR5K_TX_QUEUE_ID_CAB;
+ break;
+ case AR5K_TX_QUEUE_XR_DATA:
+ if (ah->ah_version != AR5K_AR5212)
+ ATH5K_ERR(ah->ah_sc,
+ "XR data queues only supported in"
+ " 5212!\n");
+ queue = AR5K_TX_QUEUE_ID_XR_DATA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * Setup internal queue structure
+ */
+ memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+ ah->ah_txq[queue].tqi_type = queue_type;
+
+ if (queue_info != NULL) {
+ queue_info->tqi_type = queue_type;
+ ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * We use ah_txq_status to hold a temp value for
+ * the Secondary interrupt mask registers on 5211+
+ * check out ath5k_hw_reset_tx_queue
+ */
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+ return queue;
+}
+
+/*
+ * Get number of pending frames
+ * for a specific queue [5211+]
+ */
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 pending;
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ /* Return if queue is declared inactive */
+ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return false;
+
+ /* XXX: How about AR5K_CFG_TXCNT ? */
+ if (ah->ah_version == AR5K_AR5210)
+ return false;
+
+ pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT);
+
+ /* It's possible to have no frames pending even if TXE
+ * is set. To indicate that q has not stopped return
+ * true */
+ if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return true;
+
+ return pending;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+ return;
+
+ /* This queue will be skipped in further operations */
+ ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+ /*For SIMR setup*/
+ AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/*
+ * Set DFS properties for a transmit queue on DCU
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+ u32 cw_min, cw_max, retry_lg, retry_sh;
+ struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+ ATH5K_TRACE(ah->ah_sc);
+ AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+ tq = &ah->ah_txq[queue];
+
+ if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+ return 0;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ /* Only handle data queues, others will be ignored */
+ if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
+ return 0;
+
+ /* Set Slot time */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
+ AR5K_SLOT_TIME);
+ /* Set ACK_CTS timeout */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
+ AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
+ /* Set Transmit Latency */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_TRANSMIT_LATENCY_TURBO :
+ AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
+
+ /* Set IFS0 */
+ if (ah->ah_turbo) {
+ ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
+ (ah->ah_aifs + tq->tqi_aifs) *
+ AR5K_INIT_SLOT_TIME_TURBO) <<
+ AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
+ AR5K_IFS0);
+ } else {
+ ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
+ (ah->ah_aifs + tq->tqi_aifs) *
+ AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
+ AR5K_INIT_SIFS, AR5K_IFS0);
+ }
+
+ /* Set IFS1 */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
+ AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
+ /* Set AR5K_PHY_SETTLING */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+ | 0x38 :
+ (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+ | 0x1C,
+ AR5K_PHY_SETTLING);
+ /* Set Frame Control Register */
+ ath5k_hw_reg_write(ah, ah->ah_turbo ?
+ (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
+ AR5K_PHY_TURBO_SHORT | 0x2020) :
+ (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+ AR5K_PHY_FRAME_CTL_5210);
+ }
+
+ /*
+ * Calculate cwmin/max by channel mode
+ */
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
+ ah->ah_aifs = AR5K_TUNE_AIFS;
+ /*XR is only supported on 5212*/
+ if (IS_CHAN_XR(ah->ah_current_channel) &&
+ ah->ah_version == AR5K_AR5212) {
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
+ ah->ah_aifs = AR5K_TUNE_AIFS_XR;
+ /*B mode is not supported on 5210*/
+ } else if (IS_CHAN_B(ah->ah_current_channel) &&
+ ah->ah_version != AR5K_AR5210) {
+ cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
+ cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
+ ah->ah_aifs = AR5K_TUNE_AIFS_11B;
+ }
+
+ cw_min = 1;
+ while (cw_min < ah->ah_cw_min)
+ cw_min = (cw_min << 1) | 1;
+
+ cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
+ ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
+ cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
+ ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
+
+ /*
+ * Calculate and set retry limits
+ */
+ if (ah->ah_software_retry) {
+ /* XXX Need to test this */
+ retry_lg = ah->ah_limit_tx_retries;
+ retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
+ AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
+ } else {
+ retry_lg = AR5K_INIT_LG_RETRY;
+ retry_sh = AR5K_INIT_SH_RETRY;
+ }
+
+ /*No QCU/DCU [5210]*/
+ if (ah->ah_version == AR5K_AR5210) {
+ ath5k_hw_reg_write(ah,
+ (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+ | AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+ AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+ | AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+ AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+ | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
+ | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
+ AR5K_NODCU_RETRY_LMT);
+ } else {
+ /*QCU/DCU [5211+]*/
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+ AR5K_DCU_RETRY_LMT_SLG_RETRY) |
+ AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+ AR5K_DCU_RETRY_LMT_SSH_RETRY) |
+ AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
+ AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
+ AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+
+ /*===Rest is also for QCU/DCU only [5211+]===*/
+
+ /*
+ * Set initial content window (cw_min/cw_max)
+ * and arbitrated interframe space (aifs)...
+ */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+ AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+ AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
+ AR5K_DCU_LCL_IFS_AIFS),
+ AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+ /*
+ * Set misc registers
+ */
+ /* Enable DCU early termination for this queue */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
+ /* Enable DCU to wait for next fragment from QCU */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_FRAG_WAIT);
+
+ /* On Maui and Spirit use the global seqnum on DCU */
+ if (ah->ah_mac_version < AR5K_SREV_AR5211)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_SEQNUM_CTL);
+
+ if (tq->tqi_cbr_period) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+ AR5K_QCU_CBRCFG_INTVAL) |
+ AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+ AR5K_QCU_CBRCFG_ORN_THRES),
+ AR5K_QUEUE_CBRCFG(queue));
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_CBR);
+ if (tq->tqi_cbr_overflow_limit)
+ AR5K_REG_ENABLE_BITS(ah,
+ AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBR_THRES_ENABLE);
+ }
+
+ if (tq->tqi_ready_time &&
+ (tq->tqi_type != AR5K_TX_QUEUE_ID_CAB))
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+ AR5K_QCU_RDYTIMECFG_INTVAL) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
+ if (tq->tqi_burst_time) {
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+ AR5K_DCU_CHAN_TIME_DUR) |
+ AR5K_DCU_CHAN_TIME_ENABLE,
+ AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+ if (tq->tqi_flags
+ & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+ AR5K_REG_ENABLE_BITS(ah,
+ AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_RDY_VEOL_POLICY);
+ }
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+ ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+ AR5K_QUEUE_DFS_MISC(queue));
+
+ /*
+ * Set registers by queue type
+ */
+ switch (tq->tqi_type) {
+ case AR5K_TX_QUEUE_BEACON:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS |
+ AR5K_QCU_MISC_BCN_ENABLE);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+ AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+ AR5K_DCU_MISC_BCN_ENABLE);
+ break;
+
+ case AR5K_TX_QUEUE_CAB:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_CBREXP_DIS |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS);
+
+ ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+ (AR5K_TUNE_SW_BEACON_RESP -
+ AR5K_TUNE_DMA_BEACON_RESP) -
+ AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+ AR5K_DCU_MISC_ARBLOCK_CTL_S));
+ break;
+
+ case AR5K_TX_QUEUE_UAPSD:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_CBREXP_DIS);
+ break;
+
+ case AR5K_TX_QUEUE_DATA:
+ default:
+ break;
+ }
+
+ /* TODO: Handle frame compression */
+
+ /*
+ * Enable interrupts for this tx queue
+ * in the secondary interrupt mask registers
+ */
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue);
+
+ if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE)
+ AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue);
+
+ /* Update secondary interrupt mask registers */
+
+ /* Filter out inactive queues */
+ ah->ah_txq_imr_txok &= ah->ah_txq_status;
+ ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+ ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+ ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+ ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+ ah->ah_txq_imr_cbrorn &= ah->ah_txq_status;
+ ah->ah_txq_imr_cbrurn &= ah->ah_txq_status;
+ ah->ah_txq_imr_qtrig &= ah->ah_txq_status;
+ ah->ah_txq_imr_nofrm &= ah->ah_txq_status;
+
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+ AR5K_SIMR0_QCU_TXOK) |
+ AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+ AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+ AR5K_SIMR1_QCU_TXERR) |
+ AR5K_REG_SM(ah->ah_txq_imr_txeol,
+ AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
+ /* Update simr2 but don't overwrite rest simr2 settings */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2,
+ AR5K_REG_SM(ah->ah_txq_imr_txurn,
+ AR5K_SIMR2_QCU_TXURN));
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn,
+ AR5K_SIMR3_QCBRORN) |
+ AR5K_REG_SM(ah->ah_txq_imr_cbrurn,
+ AR5K_SIMR3_QCBRURN), AR5K_SIMR3);
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig,
+ AR5K_SIMR4_QTRIG), AR5K_SIMR4);
+ /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm,
+ AR5K_TXNOFRM_QCU), AR5K_TXNOFRM);
+ /* No queue has TXNOFRM enabled, disable the interrupt
+ * by setting AR5K_TXNOFRM to zero */
+ if (ah->ah_txq_imr_nofrm == 0)
+ ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM);
+
+ /* Set QCU mask for this DCU to save power */
+ AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue);
+ }
+
+ return 0;
+}
+
+/*
+ * Get slot time from DCU
+ */
+unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (ah->ah_version == AR5K_AR5210)
+ return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
+ AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+ else
+ return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+}
+
+/*
+ * Set slot time on DCU
+ */
+int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+{
+ ATH5K_TRACE(ah->ah_sc);
+ if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+ return -EINVAL;
+
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
+ ah->ah_turbo), AR5K_SLOT_TIME);
+ else
+ ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
new file mode 100644
index 000000000000..7070d1543cdc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -0,0 +1,2589 @@
+/*
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k
+ * maintained by Reyk Floeter
+ *
+ * I tried to document those registers by looking at ar5k code, some
+ * 802.11 (802.11e mostly) papers and by reading various public available
+ * Atheros presentations and papers like these:
+ *
+ * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
+ * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
+ *
+ * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
+ */
+
+
+
+/*====MAC DMA REGISTERS====*/
+
+/*
+ * AR5210-Specific TXDP registers
+ * 5210 has only 2 transmit queues so no DCU/QCU, just
+ * 2 transmit descriptor pointers...
+ */
+#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */
+#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */
+
+/*
+ * Mac Control Register
+ */
+#define AR5K_CR 0x0008 /* Register Address */
+#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */
+#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */
+#define AR5K_CR_RXE 0x00000004 /* RX Enable */
+#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */
+#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */
+#define AR5K_CR_RXD 0x00000020 /* RX Disable */
+#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */
+
+/*
+ * RX Descriptor Pointer register
+ */
+#define AR5K_RXDP 0x000c
+
+/*
+ * Configuration and status register
+ */
+#define AR5K_CFG 0x0014 /* Register Address */
+#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */
+#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */
+#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */
+#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */
+#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */
+#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
+#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */
+#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */
+#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */
+#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */
+#define AR5K_CFG_TXCNT_S 11
+#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */
+#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */
+#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */
+#define AR5K_CFG_PCI_THRES_S 17
+
+/*
+ * Interrupt enable register
+ */
+#define AR5K_IER 0x0024 /* Register Address */
+#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */
+#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */
+
+
+/*
+ * 0x0028 is Beacon Control Register on 5210
+ * and first RTS duration register on 5211
+ */
+
+/*
+ * Beacon control register [5210]
+ */
+#define AR5K_BCR 0x0028 /* Register Address */
+#define AR5K_BCR_AP 0x00000000 /* AP mode */
+#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */
+#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */
+#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */
+#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */
+#define AR5K_BCR_BCGET 0x00000010
+
+/*
+ * First RTS duration register [5211]
+ */
+#define AR5K_RTSD0 0x0028 /* Register Address */
+#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */
+#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */
+#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/
+#define AR5K_RTSD0_9_S 8
+#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/
+#define AR5K_RTSD0_12_S 16
+#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/
+#define AR5K_RTSD0_18_S 24
+
+
+/*
+ * 0x002c is Beacon Status Register on 5210
+ * and second RTS duration register on 5211
+ */
+
+/*
+ * Beacon status register [5210]
+ *
+ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
+ * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
+ * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
+ * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
+ */
+#define AR5K_BSR 0x002c /* Register Address */
+#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */
+#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */
+#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */
+#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */
+#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */
+#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */
+#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */
+#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */
+#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */
+#define AR5K_BSR_SWBA_CNT 0x00ff0000
+
+/*
+ * Second RTS duration register [5211]
+ */
+#define AR5K_RTSD1 0x002c /* Register Address */
+#define AR5K_RTSD1_24 0x000000ff /* 24Mb */
+#define AR5K_RTSD1_24_S 0
+#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */
+#define AR5K_RTSD1_36_S 8
+#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */
+#define AR5K_RTSD1_48_S 16
+#define AR5K_RTSD1_54 0xff000000 /* 54Mb */
+#define AR5K_RTSD1_54_S 24
+
+
+/*
+ * Transmit configuration register
+ */
+#define AR5K_TXCFG 0x0030 /* Register Address */
+#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S 0
+#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S 4
+#define AR5K_TXCFG_TXFULL_0B 0x00000000
+#define AR5K_TXCFG_TXFULL_64B 0x00000010
+#define AR5K_TXCFG_TXFULL_128B 0x00000020
+#define AR5K_TXCFG_TXFULL_192B 0x00000030
+#define AR5K_TXCFG_TXFULL_256B 0x00000040
+#define AR5K_TXCFG_TXCONT_EN 0x00000080
+#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */
+#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */
+
+/*
+ * Receive configuration register
+ */
+#define AR5K_RXCFG 0x0034 /* Register Address */
+#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */
+#define AR5K_RXCFG_SDMAMW_S 0
+#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */
+#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */
+
+/*
+ * Receive jumbo descriptor last address register
+ * Only found in 5211 (?)
+ */
+#define AR5K_RXJLA 0x0038
+
+/*
+ * MIB control register
+ */
+#define AR5K_MIBC 0x0040 /* Register Address */
+#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */
+#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */
+#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */
+#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */
+
+/*
+ * Timeout prescale register
+ */
+#define AR5K_TOPS 0x0044
+#define AR5K_TOPS_M 0x0000ffff
+
+/*
+ * Receive timeout register (no frame received)
+ */
+#define AR5K_RXNOFRM 0x0048
+#define AR5K_RXNOFRM_M 0x000003ff
+
+/*
+ * Transmit timeout register (no frame sent)
+ */
+#define AR5K_TXNOFRM 0x004c
+#define AR5K_TXNOFRM_M 0x000003ff
+#define AR5K_TXNOFRM_QCU 0x000ffc00
+#define AR5K_TXNOFRM_QCU_S 10
+
+/*
+ * Receive frame gap timeout register
+ */
+#define AR5K_RPGTO 0x0050
+#define AR5K_RPGTO_M 0x000003ff
+
+/*
+ * Receive frame count limit register
+ */
+#define AR5K_RFCNT 0x0054
+#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */
+#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */
+
+/*
+ * Misc settings register
+ * (reserved0-3)
+ */
+#define AR5K_MISC 0x0058 /* Register Address */
+#define AR5K_MISC_DMA_OBS_M 0x000001e0
+#define AR5K_MISC_DMA_OBS_S 5
+#define AR5K_MISC_MISC_OBS_M 0x00000e00
+#define AR5K_MISC_MISC_OBS_S 9
+#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000
+#define AR5K_MISC_MAC_OBS_LSB_S 12
+#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000
+#define AR5K_MISC_MAC_OBS_MSB_S 15
+#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */
+#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */
+
+/*
+ * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
+ */
+#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */
+#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */
+#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */
+
+/*
+ * Interrupt Status Registers
+ *
+ * For 5210 there is only one status register but for
+ * 5211/5212 we have one primary and 4 secondary registers.
+ * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
+ * Most of these bits are common for all chipsets.
+ */
+#define AR5K_ISR 0x001c /* Register Address [5210] */
+#define AR5K_PISR 0x0080 /* Register Address [5211+] */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */
+#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
+#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
+#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
+#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */
+#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */
+#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */
+#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
+#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */
+#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
+#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
+#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
+#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */
+#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
+#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
+#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
+#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
+#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
+#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
+#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+
+/*
+ * Secondary status registers [5211+] (0 - 4)
+ *
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
+ */
+#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
+#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S 0
+#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
+
+#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
+#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S 0
+#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S 16
+
+#define AR5K_SISR2 0x008c /* Register Address [5211+] */
+#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S 0
+#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */
+#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */
+#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */
+#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
+#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
+#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
+#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
+#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
+#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
+
+#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
+#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBRORN_S 0
+#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S 16
+
+#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
+#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S 0
+
+/*
+ * Shadow read-and-clear interrupt status registers [5211+]
+ */
+#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */
+#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */
+#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */
+#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */
+#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */
+#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */
+
+/*
+ * Interrupt Mask Registers
+ *
+ * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
+ */
+#define AR5K_IMR 0x0020 /* Register Address [5210] */
+#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/
+#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
+#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
+#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
+#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/
+#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/
+#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/
+#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/
+#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/
+#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/
+#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/
+#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/
+#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/
+#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */
+#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
+#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
+#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
+#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
+#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
+#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
+#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
+#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
+#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+
+/*
+ * Secondary interrupt mask registers [5211+] (0 - 4)
+ */
+#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */
+#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SIMR0_QCU_TXOK_S 0
+#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SIMR0_QCU_TXDESC_S 16
+
+#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */
+#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SIMR1_QCU_TXERR_S 0
+#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SIMR1_QCU_TXEOL_S 16
+
+#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */
+#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SIMR2_QCU_TXURN_S 0
+#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */
+#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */
+#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */
+#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
+#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
+#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
+#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
+#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
+#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
+
+#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
+#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SIMR3_QCBRORN_S 0
+#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SIMR3_QCBRURN_S 16
+
+#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */
+#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SIMR4_QTRIG_S 0
+
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
+
+/*
+ * Decompression mask registers [5212+]
+ */
+#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */
+#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define AR5K_WOW_PCFG 0x0410 /* Register Address */
+#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */
+#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */
+#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */
+#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */
+#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */
+#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */
+#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */
+#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */
+#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define AR5K_WOW_PAT_IDX 0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */
+#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */
+#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */
+#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */
+#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */
+#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */
+#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */
+
+/*
+ * Decompression configuration registers [5212+]
+ */
+#define AR5K_DCCFG 0x0420 /* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */
+
+/*
+ * Compression configuration registers [5212+]
+ */
+#define AR5K_CCFG 0x0600 /* Register Address */
+#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */
+#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */
+
+#define AR5K_CCFG_CCU 0x0604 /* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */
+#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */
+
+/*
+ * Compression performance counter registers [5212+]
+ */
+#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */
+#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/
+#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */
+#define AR5K_CPC3 0x061c /* Compression performance counter 3 */
+#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */
+
+
+/*
+ * Queue control unit (QCU) registers [5211+]
+ *
+ * Card has 12 TX Queues but i see that only 0-9 are used (?)
+ * both in binary HAL (see ah.h) and ar5k. Each queue has it's own
+ * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate)
+ * configuration register (0x08c0 - 0x08ec), a ready time configuration
+ * register (0x0900 - 0x092c), a misc configuration register (0x09c0 -
+ * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some
+ * global registers, QCU transmit enable/disable and "one shot arm (?)"
+ * set/clear, which contain status for all queues (we shift by 1 for each
+ * queue). To access these registers easily we define some macros here
+ * that are used inside HAL. For more infos check out *_tx_queue functs.
+ */
+
+/*
+ * Generic QCU Register access macros
+ */
+#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r)
+#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q))
+#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q))
+
+/*
+ * QCU Transmit descriptor pointer registers
+ */
+#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */
+#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q)
+
+/*
+ * QCU Transmit enable register
+ */
+#define AR5K_QCU_TXE 0x0840
+#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q)
+#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q)
+
+/*
+ * QCU Transmit disable register
+ */
+#define AR5K_QCU_TXD 0x0880
+#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q)
+#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q)
+
+/*
+ * QCU Constant Bit Rate configuration registers
+ */
+#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */
+#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */
+#define AR5K_QCU_CBRCFG_INTVAL_S 0
+#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */
+#define AR5K_QCU_CBRCFG_ORN_THRES_S 24
+#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q)
+
+/*
+ * QCU Ready time configuration registers
+ */
+#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */
+#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */
+#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0
+#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */
+#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
+
+/*
+ * QCU one shot arm set registers
+ */
+#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */
+#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff
+
+/*
+ * QCU one shot arm clear registers
+ */
+#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */
+#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff
+
+/*
+ * QCU misc registers
+ */
+#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */
+#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
+#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
+#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
+#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
+#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
+#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
+#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
+#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
+#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
+
+
+/*
+ * QCU status registers
+ */
+#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */
+#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */
+#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */
+#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
+
+/*
+ * QCU ready time shutdown register
+ */
+#define AR5K_QCU_RDYTIMESHDN 0x0a40
+#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff
+
+/*
+ * QCU compression buffer base registers [5212+]
+ */
+#define AR5K_QCU_CBB_SELECT 0x0b00
+#define AR5K_QCU_CBB_ADDR 0x0b04
+#define AR5K_QCU_CBB_ADDR_S 9
+
+/*
+ * QCU compression buffer configuration register [5212+]
+ * (buffer size)
+ */
+#define AR5K_QCU_CBCFG 0x0b08
+
+
+
+/*
+ * Distributed Coordination Function (DCF) control unit (DCU)
+ * registers [5211+]
+ *
+ * These registers control the various characteristics of each queue
+ * for 802.11e (WME) combatibility so they go together with
+ * QCU registers in pairs. For each queue we have a QCU mask register,
+ * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
+ * a retry limit register (0x1080 - 0x10ac), a channel time register
+ * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
+ * a sequence number register (0x1140 - 0x116c). It seems that "global"
+ * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * We use the same macros here for easier register access.
+ *
+ */
+
+/*
+ * DCU QCU mask registers
+ */
+#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */
+#define AR5K_DCU_QCUMASK_M 0x000003ff
+#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q)
+
+/*
+ * DCU local Inter Frame Space settings register
+ */
+#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */
+#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MIN_S 0
+#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
+#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
+#define AR5K_DCU_LCL_IFS_AIFS_S 20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
+#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
+
+/*
+ * DCU retry limit registers
+ */
+#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0
+#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */
+#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14
+#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q)
+
+/*
+ * DCU channel time registers
+ */
+#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */
+#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */
+#define AR5K_DCU_CHAN_TIME_DUR_S 0
+#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */
+#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q)
+
+/*
+ * DCU misc registers [5211+]
+ *
+ * Note: Arbiter lockout control controls the
+ * behaviour on low priority queues when we have multiple queues
+ * with pending frames. Intra-frame lockout means we wait until
+ * the queue's current frame transmits (with post frame backoff and bursting)
+ * before we transmit anything else and global lockout means we
+ * wait for the whole queue to finish before higher priority queues
+ * can transmit (this is used on beacon and CAB queues).
+ * No lockout means there is no special handling.
+ */
+#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
+#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
+ station RTS/data failure count
+ reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
+ CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
+#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
+#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
+#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
+#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
+#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
+#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
+#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
+#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */
+#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */
+#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */
+#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */
+#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */
+#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */
+#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */
+#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
+
+/*
+ * DCU frame sequence number registers
+ */
+#define AR5K_DCU_SEQNUM_BASE 0x1140
+#define AR5K_DCU_SEQNUM_M 0x00000fff
+#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
+
+/*
+ * DCU global IFS SIFS register
+ */
+#define AR5K_DCU_GBL_IFS_SIFS 0x1030
+#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS slot interval register
+ */
+#define AR5K_DCU_GBL_IFS_SLOT 0x1070
+#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff
+
+/*
+ * DCU global IFS EIFS register
+ */
+#define AR5K_DCU_GBL_IFS_EIFS 0x10b0
+#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand corectly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
+ */
+#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */
+#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */
+#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
+#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
+
+/*
+ * DCU frame prefetch control register
+ */
+#define AR5K_DCU_FP 0x1230 /* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */
+
+/*
+ * DCU transmit pause control/status register
+ */
+#define AR5K_DCU_TXP 0x1270 /* Register Address */
+#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */
+#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ * each entry contains a 32bit slice of the
+ * 128bit tx filter for each DCU (4 slices per DCU)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE 0x1038
+#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
+
+/*
+ * DCU transmit filter table 1 (16 entries)
+ */
+#define AR5K_DCU_TX_FILTER_1_BASE 0x103c
+#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64))
+
+/*
+ * DCU clear transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_CLR 0x143c
+
+/*
+ * DCU set transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_SET 0x147c
+
+/*
+ * Reset control register
+ */
+#define AR5K_RESET_CTL 0x4000 /* Register Address */
+#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */
+#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */
+#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */
+#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */
+#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */
+#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
+
+/*
+ * Sleep control register
+ */
+#define AR5K_SLEEP_CTL 0x4004 /* Register Address */
+#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */
+#define AR5K_SLEEP_CTL_SLDUR_S 0
+#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */
+#define AR5K_SLEEP_CTL_SLE_S 16
+#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
+#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
+#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
+#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
+
+/*
+ * Interrupt pending register
+ */
+#define AR5K_INTPEND 0x4008
+#define AR5K_INTPEND_M 0x00000001
+
+/*
+ * Sleep force register
+ */
+#define AR5K_SFR 0x400c
+#define AR5K_SFR_EN 0x00000001
+
+/*
+ * PCI configuration register
+ * TODO: Fix LED stuff
+ */
+#define AR5K_PCICFG 0x4010 /* Register Address */
+#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
+#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
+#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
+#define AR5K_PCICFG_EESIZE_S 3
+#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
+#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
+#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
+#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
+#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
+#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
+#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
+#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
+#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
+#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
+#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
+#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
+#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */
+#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */
+#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */
+#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */
+#define AR5K_PCICFG_LEDBLINK_S 20
+#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */
+#define AR5K_PCICFG_LEDSTATE \
+ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
+ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
+
+/*
+ * "General Purpose Input/Output" (GPIO) control register
+ *
+ * I'm not sure about this but after looking at the code
+ * for all chipsets here is what i got.
+ *
+ * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits)
+ * Mode 0 -> always input
+ * Mode 1 -> output when GPIODO for this GPIO is set to 0
+ * Mode 2 -> output when GPIODO for this GPIO is set to 1
+ * Mode 3 -> always output
+ *
+ * For more infos check out get_gpio/set_gpio and
+ * set_gpio_input/set_gpio_output functs.
+ * For more infos on gpio interrupt check out set_gpio_intr.
+ */
+#define AR5K_NUM_GPIO 6
+
+#define AR5K_GPIOCR 0x4014 /* Register Address */
+#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
+#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
+#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
+#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
+#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
+#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */
+#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */
+
+/*
+ * "General Purpose Input/Output" (GPIO) data output register
+ */
+#define AR5K_GPIODO 0x4018
+
+/*
+ * "General Purpose Input/Output" (GPIO) data input register
+ */
+#define AR5K_GPIODI 0x401c
+#define AR5K_GPIODI_M 0x0000002f
+
+/*
+ * Silicon revision register
+ */
+#define AR5K_SREV 0x4020 /* Register Address */
+#define AR5K_SREV_REV 0x0000000f /* Mask for revision */
+#define AR5K_SREV_REV_S 0
+#define AR5K_SREV_VER 0x000000ff /* Mask for version */
+#define AR5K_SREV_VER_S 4
+
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST 0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK 0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG 0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
+ when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
+ down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN 0x407c
+
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES 0x4080
+#define AR5K_PCIE_SERDES_RESET 0x4084
+
+/*====EEPROM REGISTERS====*/
+
+/*
+ * EEPROM access registers
+ *
+ * Here we got a difference between 5210/5211-12
+ * read data register for 5210 is at 0x6800 and
+ * status register is at 0x6c00. There is also
+ * no eeprom command register on 5210 and the
+ * offsets are different.
+ *
+ * To read eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ * read AR5K_EEPROM_BASE +(4 * offset)
+ * check the eeprom status register
+ * and read eeprom data register.
+ *
+ * 5211 - write offset to AR5K_EEPROM_BASE
+ * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD
+ * check the eeprom status register
+ * and read eeprom data register.
+ *
+ * To write eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ * write data to AR5K_EEPROM_BASE +(4 * offset)
+ * check the eeprom status register
+ * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD
+ * 5212 write offset to AR5K_EEPROM_BASE
+ * write data to data register
+ * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD
+ * check the eeprom status register
+ *
+ * For more infos check eeprom_* functs and the ar5k.c
+ * file posted in madwifi-devel mailing list.
+ * http://sourceforge.net/mailarchive/message.php?msg_id=8966525
+ *
+ */
+#define AR5K_EEPROM_BASE 0x6000
+
+/*
+ * EEPROM data register
+ */
+#define AR5K_EEPROM_DATA_5211 0x6004
+#define AR5K_EEPROM_DATA_5210 0x6800
+#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
+
+/*
+ * EEPROM command register
+ */
+#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
+#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
+#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
+#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
+
+/*
+ * EEPROM status register
+ */
+#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */
+#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */
+#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
+#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */
+#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */
+#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */
+#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */
+
+/*
+ * EEPROM config register
+ */
+#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
+#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO 0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
+#define AR5K_EEPROM_CFG_CLK_RATE_S 3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S 8
+#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
+
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
+ * Protocol Control Unit (PCU) registers
+ */
+/*
+ * Used for checking initial register writes
+ * during channel reset (see reset func)
+ */
+#define AR5K_PCU_MIN 0x8000
+#define AR5K_PCU_MAX 0x8fff
+
+/*
+ * First station id register (Lower 32 bits of MAC address)
+ */
+#define AR5K_STA_ID0 0x8000
+#define AR5K_STA_ID0_ARRD_L32 0xffffffff
+
+/*
+ * Second station id register (Upper 16 bits of MAC address + PCU settings)
+ */
+#define AR5K_STA_ID1 0x8004 /* Register Address */
+#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
+#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
+#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
+#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */
+#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */
+#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */
+#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/
+#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
+#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */
+#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
+#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
+
+/*
+ * First BSSID register (MAC address, lower 32bits)
+ */
+#define AR5K_BSS_ID0 0x8008
+
+/*
+ * Second BSSID register (MAC address in upper 16 bits)
+ *
+ * AID: Association ID
+ */
+#define AR5K_BSS_ID1 0x800c
+#define AR5K_BSS_ID1_AID 0xffff0000
+#define AR5K_BSS_ID1_AID_S 16
+
+/*
+ * Backoff slot time register
+ */
+#define AR5K_SLOT_TIME 0x8010
+
+/*
+ * ACK/CTS timeout register
+ */
+#define AR5K_TIME_OUT 0x8014 /* Register Address */
+#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */
+#define AR5K_TIME_OUT_ACK_S 0
+#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */
+#define AR5K_TIME_OUT_CTS_S 16
+
+/*
+ * RSSI threshold register
+ */
+#define AR5K_RSSI_THR 0x8018 /* Register Address */
+#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */
+#define AR5K_RSSI_THR_BMISS_5210_S 8
+#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5211_S 8
+#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211)
+#define AR5K_RSSI_THR_BMISS_S 8
+
+/*
+ * 5210 has more PCU registers because there is no QCU/DCU
+ * so queue parameters are set here, this way a lot common
+ * registers have different address for 5210. To make things
+ * easier we define a macro based on ah->ah_version for common
+ * registers with different addresses and common flags.
+ */
+
+/*
+ * Retry limit register
+ *
+ * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
+ */
+#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14
+#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */
+#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20
+
+/*
+ * Transmit latency register
+ */
+#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */
+#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */
+#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_USEC_5210 : AR5K_USEC_5211)
+#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */
+#define AR5K_USEC_1_S 0
+#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */
+#define AR5K_USEC_32_S 7
+#define AR5K_USEC_TX_LATENCY_5211 0x007fc000
+#define AR5K_USEC_TX_LATENCY_5211_S 14
+#define AR5K_USEC_RX_LATENCY_5211 0x1f800000
+#define AR5K_USEC_RX_LATENCY_5211_S 23
+#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */
+#define AR5K_USEC_TX_LATENCY_5210_S 14
+#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */
+#define AR5K_USEC_RX_LATENCY_5210_S 20
+
+/*
+ * PCU beacon control register
+ */
+#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */
+#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */
+#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_BEACON_5210 : AR5K_BEACON_5211)
+#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */
+#define AR5K_BEACON_PERIOD_S 0
+#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */
+#define AR5K_BEACON_TIM_S 16
+#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */
+#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */
+
+/*
+ * CFP period register
+ */
+#define AR5K_CFP_PERIOD_5210 0x8028
+#define AR5K_CFP_PERIOD_5211 0x8024
+#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211)
+
+/*
+ * Next beacon time register
+ */
+#define AR5K_TIMER0_5210 0x802c
+#define AR5K_TIMER0_5211 0x8028
+#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
+
+/*
+ * Next DMA beacon alert register
+ */
+#define AR5K_TIMER1_5210 0x8030
+#define AR5K_TIMER1_5211 0x802c
+#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
+
+/*
+ * Next software beacon alert register
+ */
+#define AR5K_TIMER2_5210 0x8034
+#define AR5K_TIMER2_5211 0x8030
+#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
+
+/*
+ * Next ATIM window time register
+ */
+#define AR5K_TIMER3_5210 0x8038
+#define AR5K_TIMER3_5211 0x8034
+#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
+
+
+/*
+ * 5210 First inter frame spacing register (IFS)
+ */
+#define AR5K_IFS0 0x8040
+#define AR5K_IFS0_SIFS 0x000007ff
+#define AR5K_IFS0_SIFS_S 0
+#define AR5K_IFS0_DIFS 0x007ff800
+#define AR5K_IFS0_DIFS_S 11
+
+/*
+ * 5210 Second inter frame spacing register (IFS)
+ */
+#define AR5K_IFS1 0x8044
+#define AR5K_IFS1_PIFS 0x00000fff
+#define AR5K_IFS1_PIFS_S 0
+#define AR5K_IFS1_EIFS 0x03fff000
+#define AR5K_IFS1_EIFS_S 12
+#define AR5K_IFS1_CS_EN 0x04000000
+
+
+/*
+ * CFP duration register
+ */
+#define AR5K_CFP_DUR_5210 0x8048
+#define AR5K_CFP_DUR_5211 0x8038
+#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211)
+
+/*
+ * Receive filter register
+ */
+#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */
+#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */
+#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
+#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */
+#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */
+#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */
+#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */
+#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */
+#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */
+#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */
+#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */
+#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */
+#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */
+#define AR5K_RX_FILTER_PHYERR \
+ ((ah->ah_version == AR5K_AR5211 ? \
+ AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212))
+#define AR5K_RX_FILTER_RADARERR \
+ ((ah->ah_version == AR5K_AR5211 ? \
+ AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212))
+
+/*
+ * Multicast filter register (lower 32 bits)
+ */
+#define AR5K_MCAST_FILTER0_5210 0x8050
+#define AR5K_MCAST_FILTER0_5211 0x8040
+#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211)
+
+/*
+ * Multicast filter register (higher 16 bits)
+ */
+#define AR5K_MCAST_FILTER1_5210 0x8054
+#define AR5K_MCAST_FILTER1_5211 0x8044
+#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211)
+
+
+/*
+ * Transmit mask register (lower 32 bits) [5210]
+ */
+#define AR5K_TX_MASK0 0x8058
+
+/*
+ * Transmit mask register (higher 16 bits) [5210]
+ */
+#define AR5K_TX_MASK1 0x805c
+
+/*
+ * Clear transmit mask [5210]
+ */
+#define AR5K_CLR_TMASK 0x8060
+
+/*
+ * Trigger level register (before transmission) [5210]
+ */
+#define AR5K_TRIG_LVL 0x8064
+
+
+/*
+ * PCU control register
+ *
+ * Only DIS_RX is used in the code, the rest i guess are
+ * for tweaking/diagnostics.
+ */
+#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */
+#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */
+#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
+#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */
+#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */
+#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */
+#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */
+#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020
+#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211)
+#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */
+#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
+#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
+#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */
+#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
+#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
+#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */
+#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
+#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
+#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
+#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
+#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */
+#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */
+#define AR5K_DIAG_SW_SCRAM_SEED_S 10
+#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */
+#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
+#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
+#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
+#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
+#define AR5K_DIAG_SW_OBSPT_S 18
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */
+
+/*
+ * TSF (clock) register (lower 32 bits)
+ */
+#define AR5K_TSF_L32_5210 0x806c
+#define AR5K_TSF_L32_5211 0x804c
+#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+/*
+ * TSF (clock) register (higher 32 bits)
+ */
+#define AR5K_TSF_U32_5210 0x8070
+#define AR5K_TSF_U32_5211 0x8050
+#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+/*
+ * Last beacon timestamp register (Read Only)
+ */
+#define AR5K_LAST_TSTP 0x8080
+
+/*
+ * ADDAC test register [5211+]
+ */
+#define AR5K_ADDAC_TEST 0x8054 /* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */
+
+/*
+ * Default antenna register [5211+]
+ */
+#define AR5K_DEFAULT_ANTENNA 0x8058
+
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM 0x805c
+
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK 0x8060
+
+/*
+ * Retry count register [5210]
+ */
+#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */
+#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */
+#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */
+
+/*
+ * Back-off status register [5210]
+ */
+#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */
+#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */
+#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */
+
+
+
+/*
+ * NAV register (current)
+ */
+#define AR5K_NAV_5210 0x808c
+#define AR5K_NAV_5211 0x8084
+#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_NAV_5210 : AR5K_NAV_5211)
+
+/*
+ * RTS success register
+ */
+#define AR5K_RTS_OK_5210 0x8090
+#define AR5K_RTS_OK_5211 0x8088
+#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211)
+
+/*
+ * RTS failure register
+ */
+#define AR5K_RTS_FAIL_5210 0x8094
+#define AR5K_RTS_FAIL_5211 0x808c
+#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211)
+
+/*
+ * ACK failure register
+ */
+#define AR5K_ACK_FAIL_5210 0x8098
+#define AR5K_ACK_FAIL_5211 0x8090
+#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211)
+
+/*
+ * FCS failure register
+ */
+#define AR5K_FCS_FAIL_5210 0x809c
+#define AR5K_FCS_FAIL_5211 0x8094
+#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211)
+
+/*
+ * Beacon count register
+ */
+#define AR5K_BEACON_CNT_5210 0x80a0
+#define AR5K_BEACON_CNT_5211 0x8098
+#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211)
+
+
+/*===5212 Specific PCU registers===*/
+
+/*
+ * Transmit power control register
+ */
+#define AR5K_TPC 0x80e8
+#define AR5K_TPC_ACK 0x0000003f /* ack frames */
+#define AR5K_TPC_ACK_S 0
+#define AR5K_TPC_CTS 0x00003f00 /* cts frames */
+#define AR5K_TPC_CTS_S 8
+#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */
+#define AR5K_TPC_CHIRP_S 16
+#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */
+#define AR5K_TPC_DOPPLER_S 24
+
+/*
+ * XR (eXtended Range) mode register
+ */
+#define AR5K_XRMODE 0x80c0 /* Register Address */
+#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */
+#define AR5K_XRMODE_POLL_TYPE_S 0
+#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */
+#define AR5K_XRMODE_POLL_SUBTYPE_S 2
+#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */
+#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */
+#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */
+#define AR5K_XRMODE_FRAME_HOLD_S 20
+
+/*
+ * XR delay register
+ */
+#define AR5K_XRDELAY 0x80c4 /* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */
+#define AR5K_XRDELAY_SLOT_DELAY_S 0
+#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */
+#define AR5K_XRDELAY_CHIRP_DELAY_S 16
+
+/*
+ * XR timeout register
+ */
+#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */
+#define AR5K_XRTIMEOUT_CHIRP_S 0
+#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */
+#define AR5K_XRTIMEOUT_POLL_S 16
+
+/*
+ * XR chirp register
+ */
+#define AR5K_XRCHIRP 0x80cc /* Register Address */
+#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */
+#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */
+
+/*
+ * XR stomp register
+ */
+#define AR5K_XRSTOMP 0x80d0 /* Register Address */
+#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */
+
+/*
+ * First enhanced sleep register
+ */
+#define AR5K_SLEEP0 0x80d4 /* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */
+#define AR5K_SLEEP0_NEXT_DTIM_S 0
+#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */
+#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */
+#define AR5K_SLEEP0_CABTO_S 24
+
+/*
+ * Second enhanced sleep register
+ */
+#define AR5K_SLEEP1 0x80d8 /* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */
+#define AR5K_SLEEP1_NEXT_TIM_S 0
+#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */
+#define AR5K_SLEEP1_BEACON_TO_S 24
+
+/*
+ * Third enhanced sleep register
+ */
+#define AR5K_SLEEP2 0x80dc /* Register Address */
+#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */
+#define AR5K_SLEEP2_TIM_PER_S 0
+#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */
+#define AR5K_SLEEP2_DTIM_PER_S 16
+
+/*
+ * BSSID mask registers
+ */
+#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */
+#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */
+
+/*
+ * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dbm) or DBM ?
+ *
+ */
+#define AR5K_TXPC 0x80e8 /* Register Address */
+#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
+#define AR5K_TXPC_ACK_S 0
+#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
+#define AR5K_TXPC_CTS_S 8
+#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S 16
+#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S 24
+
+/*
+ * Profile count registers
+ */
+#define AR5K_PROFCNT_TX 0x80ec /* Tx count */
+#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */
+#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */
+#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */
+
+/*
+ * Quiet period control registers
+ */
+#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
+#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
+
+#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S 0
+#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S 16
+
+/*
+ * TSF parameter register
+ */
+#define AR5K_TSF_PARM 0x8104 /* Register Address */
+#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */
+#define AR5K_TSF_PARM_INC_S 0
+
+/*
+ * QoS NOACK policy
+ */
+#define AR5K_QOS_NOACK 0x8108 /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
+#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
+#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7
+
+/*
+ * PHY error filter register
+ */
+#define AR5K_PHY_ERR_FIL 0x810c
+#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX 0x8110
+
+/*
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS 0x8114 /* Register Address */
+#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define AR5K_MIC_QOS_SEL 0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
+
+/*
+ * Misc mode control register (?)
+ */
+#define AR5K_MISC_MODE 0x8120 /* Register Address */
+#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */
+#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */
+#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define AR5K_OFDM_FIL_CNT 0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define AR5K_CCK_FIL_CNT 0x8128
+
+/*
+ * PHY Error Counters (?)
+ */
+#define AR5K_PHYERR_CNT1 0x812c
+#define AR5K_PHYERR_CNT1_MASK 0x8130
+
+#define AR5K_PHYERR_CNT2 0x8134
+#define AR5K_PHYERR_CNT2_MASK 0x8138
+
+/*
+ * TSF Threshold register (?)
+ */
+#define AR5K_TSF_THRES 0x813c
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */
+#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */
+#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
+ */
+#define AR5K_RATE_DUR_BASE 0x8700
+#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2))
+
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE 0x87c0
+#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE 0x87e0
+#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2))
+
+/*===5212 end===*/
+
+/*
+ * Key table (WEP) register
+ */
+#define AR5K_KEYTABLE_0_5210 0x9000
+#define AR5K_KEYTABLE_0_5211 0x8800
+#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5))
+#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5))
+#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n))
+#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2))
+#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5)
+#define AR5K_KEYTABLE_TYPE_40 0x00000000
+#define AR5K_KEYTABLE_TYPE_104 0x00000001
+#define AR5K_KEYTABLE_TYPE_128 0x00000003
+#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */
+#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */
+#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */
+#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6)
+#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7)
+#define AR5K_KEYTABLE_VALID 0x00008000
+
+/* If key type is TKIP and MIC is enabled
+ * MIC key goes in offset entry + 64 */
+#define AR5K_KEYTABLE_MIC_OFFSET 64
+
+/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit
+ * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit
+ * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit
+ *
+ * Some vendors have introduced bigger WEP keys to address
+ * security vulnerabilities in WEP. This includes:
+ *
+ * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit
+ *
+ * We can expand this if we find ar5k Atheros cards with a larger
+ * key table size.
+ */
+#define AR5K_KEYTABLE_SIZE_5210 64
+#define AR5K_KEYTABLE_SIZE_5211 128
+#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211)
+
+
+/*===PHY REGISTERS===*/
+
+/*
+ * PHY registers start
+ */
+#define AR5K_PHY_BASE 0x9800
+#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2))
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define AR5K_PHY_TST2 0x9800 /* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/
+#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */
+#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */
+#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */
+#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */
+
+/*
+ * PHY frame control register [5110] /turbo mode register [5111+]
+ *
+ * There is another frame control register for [5111+]
+ * at address 0x9944 (see below) but the 2 first flags
+ * are common here between 5110 frame control register
+ * and [5111+] turbo mode register, so this also works as
+ * a "turbo mode register" for 5110. We treat this one as
+ * a frame control register for 5110 below.
+ */
+#define AR5K_PHY_TURBO 0x9804 /* Register Address */
+#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
+#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
+
+/*
+ * PHY agility command register
+ * (aka TST_1)
+ */
+#define AR5K_PHY_AGC 0x9808 /* Register Address */
+#define AR5K_PHY_TST1 0x9808
+#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
+#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S 1
+#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S 7
+
+
+/*
+ * PHY timing register 3 [5112+]
+ */
+#define AR5K_PHY_TIMING_3 0x9814
+#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000
+#define AR5K_PHY_TIMING_3_DSC_MAN_S 17
+#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000
+#define AR5K_PHY_TIMING_3_DSC_EXP_S 13
+
+/*
+ * PHY chip revision register
+ */
+#define AR5K_PHY_CHIP_ID 0x9818
+
+/*
+ * PHY activation register
+ */
+#define AR5K_PHY_ACT 0x981c /* Register Address */
+#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */
+#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ */
+#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
+
+#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8
+
+#define AR5K_PHY_ADC_CTL 0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
+
+#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */
+#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */
+#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */
+#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */
+#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
+#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S 0
+#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */
+#define AR5K_PHY_SETTLING_SWITCH_S 7
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN 0x9848 /* Register Address */
+#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
+
+#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
+#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
+
+/*
+ * Desired ADC/PGA size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
+#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
+#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
+#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
+
+/*
+ * PHY signal register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_SIG 0x9858 /* Register Address */
+#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP_S 12
+#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
+#define AR5K_PHY_SIG_FIRPWR_S 18
+
+/*
+ * PHY coarse agility control register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
+#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO_S 7
+#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI_S 15
+
+/*
+ * PHY agility control register
+ */
+#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
+#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
+#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
+
+/*
+ * PHY noise floor status register
+ */
+#define AR5K_PHY_NF 0x9864 /* Register address */
+#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */
+#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */
+#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M)
+#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1)
+#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S 12
+#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */
+#define AR5K_PHY_NF_MINCCA_PWR_S 19
+
+/*
+ * PHY ADC saturation register [5110]
+ */
+#define AR5K_PHY_ADCSAT 0x9868
+#define AR5K_PHY_ADCSAT_ICNT 0x0001f800
+#define AR5K_PHY_ADCSAT_ICNT_S 11
+#define AR5K_PHY_ADCSAT_THR 0x000007e0
+#define AR5K_PHY_ADCSAT_THR_S 5
+
+/*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21
+
+
+/*
+ * PHY sleep registers [5112+]
+ */
+#define AR5K_PHY_SCR 0x9870
+
+#define AR5K_PHY_SLMT 0x9874
+#define AR5K_PHY_SLMT_32MHZ 0x0000007f
+
+#define AR5K_PHY_SCAL 0x9878
+#define AR5K_PHY_SCAL_32MHZ 0x0000000e
+#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a
+#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032
+
+/*
+ * PHY PLL (Phase Locked Loop) control register
+ */
+#define AR5K_PHY_PLL 0x987c
+#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
+#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
+#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
+ AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
+#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
+#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
+ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
+#define AR5K_PHY_PLL_RF5111 0x00000000
+#define AR5K_PHY_PLL_RF5112 0x00000040
+#define AR5K_PHY_PLL_HALF_RATE 0x00000100
+#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200
+
+/*
+ * RF Buffer register
+ *
+ * It's obvious from the code that 0x989c is the buffer register but
+ * for the other special registers that we write to after sending each
+ * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
+ * for now. It's interesting that they are also used for some other operations.
+ */
+
+#define AR5K_RF_BUFFER 0x989c
+#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */
+#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */
+#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */
+ /* Channel set on 5111 */
+ /* Used to read radio revision*/
+
+#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */
+ /* Bank 0,1,2,6 on 5111 */
+ /* Bank 1 on 5112 */
+ /* Used during activation on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */
+ /* Used during activation on 5111 */
+ /* Channel on 5112 */
+ /* Bank 6 on 5112 */
+
+#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */
+
+/*
+ * PHY RF stage register [5210]
+ */
+#define AR5K_PHY_RFSTG 0x98d4
+#define AR5K_PHY_RFSTG_DISABLE 0x00000021
+
+/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1 0x9900
+#define AR5K_PHY_BIN_MASK_2 0x9904
+#define AR5K_PHY_BIN_MASK_3 0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL 0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
+#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
+
+/*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */
+#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */
+#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */
+#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4
+
+/*
+ * PHY receiver delay register [5111+]
+ */
+#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */
+#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define AR5K_PHY_MAX_RX_LEN 0x991c
+
+/*
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
+ */
+#define AR5K_PHY_IQ 0x9920 /* Register Address */
+#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5
+#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12
+#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */
+#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */
+#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */
+#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */
+#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */
+#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */
+#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */
+
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define AR5K_PHY_WARM_RESET 0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL 0x992c /* Register Address */
+#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */
+#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */
+#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */
+#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */
+#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */
+#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */
+#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */
+#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */
+
+/*
+ * PHY PAPD probe register [5111+]
+ */
+#define AR5K_PHY_PAPD_PROBE 0x9930
+#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001
+#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002
+#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040
+#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00
+#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9
+#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000
+#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000
+#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */
+#define AR5K_PHY_PAPD_PROBE_TYPE_S 23
+#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0
+#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1
+#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2
+#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000
+#define AR5K_PHY_PAPD_PROBE_GAINF_S 25
+#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
+#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
+
+/*
+ * PHY TX rate power registers [5112+]
+ */
+#define AR5K_PHY_TXPOWER_RATE1 0x9934
+#define AR5K_PHY_TXPOWER_RATE2 0x9938
+#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c
+#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040
+#define AR5K_PHY_TXPOWER_RATE3 0xa234
+#define AR5K_PHY_TXPOWER_RATE4 0xa238
+
+/*
+ * PHY frame control register [5111+]
+ */
+#define AR5K_PHY_FRAME_CTL_5210 0x9804
+#define AR5K_PHY_FRAME_CTL_5211 0x9944
+#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \
+ AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
+/*---[5111+]---*/
+#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
+#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
+#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S 31
+/*---[5110/5111]---*/
+#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
+#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
+#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */
+#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */
+#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000
+#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */
+#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
+ AR5K_PHY_FRAME_CTL_TXURN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
+ AR5K_PHY_FRAME_CTL_PARITY_ERR | \
+ AR5K_PHY_FRAME_CTL_TIMING_ERR
+
+/*
+ * PHY Tx Power adjustment register [5212A+]
+ */
+#define AR5K_PHY_TX_PWR_ADJ 0x994c
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18
+
+/*
+ * PHY radar detection register [5111+]
+ */
+#define AR5K_PHY_RADAR 0x9954
+#define AR5K_PHY_RADAR_ENABLE 0x00000001
+#define AR5K_PHY_RADAR_DISABLE 0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+ 5-bits, units unknown {0..31}
+ (? MHz ?) */
+#define AR5K_PHY_RADAR_INBANDTHR_S 1
+
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S 6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
+
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S 18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
+ filter power out threshold.
+ 7-bits, standard power range
+ {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS 24
+
+/*
+ * PHY antenna switch table registers
+ */
+#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
+#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
+
+/*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES 0x9968
+
+/*
+ * Sigma Delta register (?) [5213]
+ */
+#define AR5K_PHY_SIGMA_DELTA 0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
+#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
+#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART 0x9970 /* restart */
+#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S 18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ 0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7 0x9980
+#define AR5K_PHY_TIMING_8 0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
+
+#define AR5K_PHY_BIN_MASK2_1 0x9988
+#define AR5K_PHY_BIN_MASK2_2 0x998c
+#define AR5K_PHY_BIN_MASK2_3 0x9990
+
+#define AR5K_PHY_BIN_MASK2_4 0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
+
+#define AR5K_PHY_TIMING_9 0x9998
+#define AR5K_PHY_TIMING_10 0x999c
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0
+
+/*
+ * Spur mitigation control
+ */
+#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
+
+/*
+ * Gain tables
+ */
+#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
+#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
+#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */
+#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2))
+
+/*
+ * PHY timing IQ calibration result register [5111+]
+ */
+#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */
+#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */
+#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */
+
+/*
+ * PHY current RSSI register [5111+]
+ */
+#define AR5K_PHY_CURRENT_RSSI 0x9c1c
+
+/*
+ * PHY RF Bus grant register
+ */
+#define AR5K_PHY_RFBUS_GRANT 0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
+
+/*
+ * PHY ADC test register
+ */
+#define AR5K_PHY_ADC_TEST 0x9c24
+#define AR5K_PHY_ADC_TEST_I 0x00000001
+#define AR5K_PHY_ADC_TEST_Q 0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define AR5K_PHY_DAC_TEST 0x9c28
+#define AR5K_PHY_DAC_TEST_I 0x00000001
+#define AR5K_PHY_DAC_TEST_Q 0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define AR5K_PHY_PTAT 0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define AR5K_PHY_BAD_TX_RATE 0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */
+#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */
+#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */
+#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define AR5K_PHY_CHAN_STATUS 0x9c38
+#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
+
+/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
+#define AR5K_PHY_SDELAY 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
+#define AR5K_PHY_SPENDING 0x99f8
+
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define AR5K_PHY_PAPD_I_BASE 0xa000
+#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
+
+/*
+ * PHY PCDAC TX power table
+ */
+#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180
+#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * PHY mode register [5111+]
+ */
+#define AR5K_PHY_MODE 0x0a200 /* Register Address */
+#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */
+#define AR5K_PHY_MODE_MOD_OFDM 0
+#define AR5K_PHY_MODE_MOD_CCK 1
+#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */
+#define AR5K_PHY_MODE_FREQ_5GHZ 0
+#define AR5K_PHY_MODE_FREQ_2GHZ 2
+#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */
+#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */
+#define AR5K_PHY_MODE_RAD_RF5111 0
+#define AR5K_PHY_MODE_RAD_RF5112 8
+#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */
+#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */
+#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */
+
+/*
+ * PHY CCK transmit control register [5111+ (?)]
+ */
+#define AR5K_PHY_CCKTXCTL 0xa204
+#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000
+#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010
+#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001
+#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR 0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
+
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV 0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
+
+/*
+ * PHY 2GHz gain register [5111+]
+ */
+#define AR5K_PHY_GAIN_2GHZ 0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
+#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
+
+#define AR5K_PHY_DAG_CCK_CTL 0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
+
+#define AR5K_PHY_FAST_ADC 0xa24c
+
+#define AR5K_PHY_BLUETOOTH 0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1 0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
+#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000
+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16
+#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000
+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18
+#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000
+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20
+
+#define AR5K_PHY_TPC_RG5 0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22
+
+/*
+ * PHY PDADC Tx power table
+ */
+#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280
+#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2))
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
new file mode 100644
index 000000000000..775fdf78554b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -0,0 +1,1346 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_RESET
+
+/*****************************\
+ Reset functions and helpers
+\*****************************/
+
+#include <linux/pci.h> /* To determine if a card is pci-e */
+#include <linux/bitops.h> /* For get_bitmask_order */
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
+ *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * http://www.freepatentsonline.com/7184495.html
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ /* Get exponent and mantissa and set it */
+ u32 coef_scaled, coef_exp, coef_man,
+ ds_coef_exp, ds_coef_man, clock;
+
+ BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+ !(channel->hw_value & CHANNEL_OFDM));
+
+ /* Get coefficient
+ * ALGO: coef = (5 * clock * carrier_freq) / 2)
+ * we scale coef by shifting clock value by 24 for
+ * better precision since we use integers */
+ /* TODO: Half/quarter rate */
+ clock = ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
+
+ coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+ /* Get exponent
+ * ALGO: coef_exp = 14 - highest set bit position */
+ coef_exp = get_bitmask_order(coef_scaled);
+
+ /* Doesn't make sense if it's zero*/
+ if (!coef_exp)
+ return -EINVAL;
+
+ /* Note: we've shifted coef_scaled by 24 */
+ coef_exp = 14 - (coef_exp - 24);
+
+
+ /* Get mantissa (significant digits)
+ * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
+ coef_man = coef_scaled +
+ (1 << (24 - coef_exp - 1));
+
+ /* Calculate delta slope coefficient exponent
+ * and mantissa (remove scaling) and set them on hw */
+ ds_coef_man = coef_man >> (24 - coef_exp);
+ ds_coef_exp = coef_exp - 16;
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+ AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+ return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static const unsigned int control_rates[] =
+ { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preample
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
+ * quarter rate mode, we need to use another set of bitrates (that's why we
+ * need the mode parameter) but we don't handle these proprietary modes yet.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+ unsigned int mode)
+{
+ struct ath5k_softc *sc = ah->ah_sc;
+ struct ieee80211_rate *rate;
+ unsigned int i;
+
+ /* Write rate duration table */
+ for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
+ u32 reg;
+ u16 tx_time;
+
+ rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+
+ /* Set ACK timeout */
+ reg = AR5K_RATE_DUR(rate->hw_value);
+
+ /* An ACK frame consists of 10 bytes. If you add the FCS,
+ * which ieee80211_generic_frame_duration() adds,
+ * its 14 bytes. Note we use the control rate and not the
+ * actual rate for this rate. See mac80211 tx.c
+ * ieee80211_duration() for a brief description of
+ * what rate we should choose to TX ACKs. */
+ tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
+ sc->vif, 10, rate));
+
+ ath5k_hw_reg_write(ah, tx_time, reg);
+
+ if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+ continue;
+
+ /*
+ * We're not distinguishing short preamble here,
+ * This is true, all we'll get is a longer value here
+ * which is not necessarilly bad. We could use
+ * export ieee80211_frame_duration() but that needs to be
+ * fixed first to be properly used by mac802111 drivers:
+ *
+ * - remove erp stuff and let the routine figure ofdm
+ * erp rates
+ * - remove passing argument ieee80211_local as
+ * drivers don't have access to it
+ * - move drivers using ieee80211_generic_frame_duration()
+ * to this
+ */
+ ath5k_hw_reg_write(ah, tx_time,
+ reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+ }
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+ int ret;
+ u32 mask = val ? val : ~0U;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Read-and-clear RX Descriptor Pointer*/
+ ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+ /*
+ * Reset the device and wait until success
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+ /* Wait at least 128 PCI clocks */
+ udelay(15);
+
+ if (ah->ah_version == AR5K_AR5210) {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+ | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+ } else {
+ val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+ }
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+ /*
+ * Reset configuration register (for hw byte-swap). Note that this
+ * is only set for big endian. We do the necessary magic in
+ * AR5K_INIT_CFG.
+ */
+ if ((val & AR5K_RESET_CTL_PCU) == 0)
+ ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+ return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+ bool set_chip, u16 sleep_duration)
+{
+ unsigned int i;
+ u32 staid, data;
+
+ ATH5K_TRACE(ah->ah_sc);
+ staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+ switch (mode) {
+ case AR5K_PM_AUTO:
+ staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+ /* fallthrough */
+ case AR5K_PM_NETWORK_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah,
+ AR5K_SLEEP_CTL_SLE_ALLOW |
+ sleep_duration,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_FULL_SLEEP:
+ if (set_chip)
+ ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+ AR5K_SLEEP_CTL);
+
+ staid |= AR5K_STA_ID1_PWR_SV;
+ break;
+
+ case AR5K_PM_AWAKE:
+
+ staid &= ~AR5K_STA_ID1_PWR_SV;
+
+ if (!set_chip)
+ goto commit;
+
+ /* Preserve sleep duration */
+ data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+ if (data & 0xffc00000)
+ data = 0;
+ else
+ data = data & 0xfffcffff;
+
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ udelay(15);
+
+ for (i = 50; i > 0; i--) {
+ /* Check if the chip did wake up */
+ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_SPWR_DN) == 0)
+ break;
+
+ /* Wait a bit and retry */
+ udelay(200);
+ ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ }
+
+ /* Fail if the chip didn't wake up */
+ if (i <= 0)
+ return -EIO;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+commit:
+ ah->ah_power_mode = mode;
+ ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+ return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips and program PLL
+ * TODO: Half/Quarter rate support
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+ struct pci_dev *pdev = ah->ah_sc->pdev;
+ u32 turbo, mode, clock, bus_flags;
+ int ret;
+
+ turbo = 0;
+ mode = 0;
+ clock = 0;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ /* Wakeup the device */
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Get channel mode flags
+ */
+
+ if (ah->ah_radio >= AR5K_RF5112) {
+ mode = AR5K_PHY_MODE_RAD_RF5112;
+ clock = AR5K_PHY_PLL_RF5112;
+ } else {
+ mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
+ clock = AR5K_PHY_PLL_RF5111; /*Zero*/
+ }
+
+ if (flags & CHANNEL_2GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+ clock |= AR5K_PHY_PLL_44MHZ;
+
+ if (flags & CHANNEL_CCK) {
+ mode |= AR5K_PHY_MODE_MOD_CCK;
+ } else if (flags & CHANNEL_OFDM) {
+ /* XXX Dynamic OFDM/CCK is not supported by the
+ * AR5211 so we set MOD_OFDM for plain g (no
+ * CCK headers) operation. We need to test
+ * this, 5211 might support ofdm-only g after
+ * all, there are also initial register values
+ * in the code for g mode (see initvals.c). */
+ if (ah->ah_version == AR5K_AR5211)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else
+ mode |= AR5K_PHY_MODE_MOD_DYN;
+ } else {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else if (flags & CHANNEL_5GHZ) {
+ mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+
+ if (ah->ah_radio == AR5K_RF5413)
+ clock = AR5K_PHY_PLL_40MHZ_5413;
+ else
+ clock |= AR5K_PHY_PLL_40MHZ;
+
+ if (flags & CHANNEL_OFDM)
+ mode |= AR5K_PHY_MODE_MOD_OFDM;
+ else {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
+ return -EINVAL;
+ }
+ } else {
+ ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+ return -EINVAL;
+ }
+
+ if (flags & CHANNEL_TURBO)
+ turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+ } else { /* Reset the device */
+
+ /* ...enable Atheros turbo mode if requested */
+ if (flags & CHANNEL_TURBO)
+ ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+ AR5K_PHY_TURBO);
+ }
+
+ /* reseting PCI on PCI-E cards results card to hang
+ * and always return 0xffff... so we ingore that flag
+ * for PCI-E cards */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ /* Reset chipset */
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+ return ret;
+ }
+
+ /* ...final warm reset */
+ if (ath5k_hw_nic_reset(ah, 0)) {
+ ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /* ...update PLL if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
+ ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+ udelay(300);
+ }
+
+ /* ...set the PHY operating mode */
+ ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+ ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+ }
+
+ return 0;
+}
+
+/*
+ * If there is an external 32KHz crystal available, use it
+ * as ref. clock instead of 32/40MHz clock and baseband clocks
+ * to save power during sleep or restore normal 32/40MHz
+ * operation.
+ *
+ * XXX: When operating on 32KHz certain PHY registers (27 - 31,
+ * 123 - 127) require delay on access.
+ */
+static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 scal, spending, usec32;
+
+ /* Only set 32KHz settings if we have an external
+ * 32KHz crystal present */
+ if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
+ AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
+ enable) {
+
+ /* 1 usec/cycle */
+ AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
+ /* Set up tsf increment on each cycle */
+ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
+
+ /* Set baseband sleep control registers
+ * and sleep control rate */
+ ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ spending = 0x14;
+ else
+ spending = 0x18;
+ ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+ ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
+ ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
+ ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
+ } else {
+ ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
+ ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
+ ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
+ }
+
+ /* Enable sleep clock operation */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+ } else {
+
+ /* Disable sleep clock operation and
+ * restore default parameters */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_EN);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+ AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+
+ ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+
+ if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+ scal = AR5K_PHY_SCAL_32MHZ_2417;
+ else if (ath5k_eeprom_is_hb63(ah))
+ scal = AR5K_PHY_SCAL_32MHZ_HB63;
+ else
+ scal = AR5K_PHY_SCAL_32MHZ;
+ ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+
+ ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+ ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ spending = 0x14;
+ else
+ spending = 0x18;
+ ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413))
+ usec32 = 39;
+ else
+ usec32 = 31;
+ AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
+ }
+ return;
+}
+
+static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u8 refclk_freq;
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ refclk_freq = 40;
+ else
+ refclk_freq = 32;
+
+ if ((channel->center_freq % refclk_freq != 0) &&
+ ((channel->center_freq % refclk_freq < 10) ||
+ (channel->center_freq % refclk_freq > 22)))
+ return true;
+ else
+ return false;
+}
+
+/* TODO: Half/Quarter rate */
+static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+
+ /* Setup ADC control */
+ ath5k_hw_reg_write(ah,
+ (AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
+ AR5K_REG_SM(2,
+ AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
+ AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
+ AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
+ AR5K_PHY_ADC_CTL);
+
+
+
+ /* Disable barker RSSI threshold */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
+ AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
+
+ /* Set the mute mask */
+ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+ }
+
+ /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
+
+ /* Enable DCU double buffering */
+ if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_DCU_DBL_BUF_DIS);
+
+ /* Set DAC/ADC delays */
+ if (ah->ah_version == AR5K_AR5212) {
+ u32 scal;
+ if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+ scal = AR5K_PHY_SCAL_32MHZ_2417;
+ else if (ath5k_eeprom_is_hb63(ah))
+ scal = AR5K_PHY_SCAL_32MHZ_HB63;
+ else
+ scal = AR5K_PHY_SCAL_32MHZ;
+ ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+ }
+
+ /* Set fast ADC */
+ if ((ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+ u32 fast_adc = true;
+
+ if (channel->center_freq == 2462 ||
+ channel->center_freq == 2467)
+ fast_adc = 0;
+
+ /* Only update if needed */
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
+ ath5k_hw_reg_write(ah, fast_adc,
+ AR5K_PHY_FAST_ADC);
+ }
+
+ /* Fix for first revision of the RF5112 RF chipset */
+ if (ah->ah_radio == AR5K_RF5112 &&
+ ah->ah_radio_5ghz_revision <
+ AR5K_SREV_RAD_5112A) {
+ u32 data;
+ ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+ AR5K_PHY_CCKTXCTL);
+ if (channel->hw_value & CHANNEL_5GHZ)
+ data = 0xffb81020;
+ else
+ data = 0xffb80d20;
+ ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+ }
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ u32 usec_reg;
+ /* 5311 has different tx/rx latency masks
+ * from 5211, since we deal 5311 the same
+ * as 5211 when setting initvals, shift
+ * values here to their proper locations */
+ usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+ ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
+ AR5K_USEC_32 |
+ AR5K_USEC_TX_LATENCY_5211 |
+ AR5K_REG_SM(29,
+ AR5K_USEC_RX_LATENCY_5210)),
+ AR5K_USEC_5211);
+ /* Clear QCU/DCU clock gating register */
+ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
+ /* Set DAC/ADC delays */
+ ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+ /* Enable PCU FIFO corruption ECO */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_ECO_ENABLE);
+ }
+}
+
+static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ s16 cck_ofdm_pwr_delta;
+
+ /* Adjust power delta for channel 14 */
+ if (channel->center_freq == 2484)
+ cck_ofdm_pwr_delta =
+ ((ee->ee_cck_ofdm_power_delta -
+ ee->ee_scaled_cck_delta) * 2) / 10;
+ else
+ cck_ofdm_pwr_delta =
+ (ee->ee_cck_ofdm_power_delta * 2) / 10;
+
+ /* Set CCK to OFDM power delta on tx power
+ * adjustment register */
+ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
+ if (channel->hw_value == CHANNEL_G)
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
+ AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
+ AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
+ AR5K_PHY_TX_PWR_ADJ);
+ else
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+ } else {
+ /* For older revs we scale power on sw during tx power
+ * setup */
+ ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
+ ah->ah_txpower.txp_cck_ofdm_gainf_delta =
+ ee->ee_cck_ofdm_gain_delta;
+ }
+
+ /* Set antenna idle switch table */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
+ AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
+ (ah->ah_antenna[ee_mode][0] |
+ AR5K_PHY_ANT_CTL_TXRX_EN));
+
+ /* Set antenna switch table */
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+ AR5K_PHY_ANT_SWITCH_TABLE_0);
+ ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+ AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+ /* Noise floor threshold */
+ ath5k_hw_reg_write(ah,
+ AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+ AR5K_PHY_NFTHRES);
+
+ if ((channel->hw_value & CHANNEL_TURBO) &&
+ (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
+ /* Switch settling time (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling_turbo[ee_mode]);
+
+ /* Tx/Rx attenuation (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx_turbo[ee_mode]);
+
+ /* ADC/PGA desired size (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size_turbo[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size_turbo[ee_mode]);
+
+ /* Tx/Rx margin (Turbo) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx_turbo[ee_mode]);
+
+ } else {
+ /* Switch settling time */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+ AR5K_PHY_SETTLING_SWITCH,
+ ee->ee_switch_settling[ee_mode]);
+
+ /* Tx/Rx attenuation */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
+ AR5K_PHY_GAIN_TXRX_ATTEN,
+ ee->ee_atn_tx_rx[ee_mode]);
+
+ /* ADC/PGA desired size */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_ADC,
+ ee->ee_adc_desired_size[ee_mode]);
+
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+ AR5K_PHY_DESIRED_SIZE_PGA,
+ ee->ee_pga_desired_size[ee_mode]);
+
+ /* Tx/Rx margin */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+ AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+ ee->ee_margin_tx_rx[ee_mode]);
+ }
+
+ /* XPA delays */
+ ath5k_hw_reg_write(ah,
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+ (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+ (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+ /* XLNA delay */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
+ AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
+ ee->ee_tx_end2xlna_enable[ee_mode]);
+
+ /* Thresh64 (ANI) */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
+ AR5K_PHY_NF_THRESH62,
+ ee->ee_thr_62[ee_mode]);
+
+
+ /* False detect backoff for channels
+ * that have spur noise. Write the new
+ * cyclic power RSSI threshold. */
+ if (ath5k_hw_chan_has_spur_noise(ah, channel))
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1 +
+ ee->ee_false_detect[ee_mode]);
+ else
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
+ AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
+ AR5K_INIT_CYCRSSI_THR1);
+
+ /* I/Q correction
+ * TODO: Per channel i/q infos ? */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CORR_ENABLE |
+ (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+ ee->ee_q_cal[ee_mode]);
+
+ /* Heavy clipping -disable for now */
+ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
+
+ return;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+ struct ieee80211_channel *channel, bool change_channel)
+{
+ u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
+ u32 phy_tst1;
+ u8 mode, freq, ee_mode, ant[2];
+ int i, ret;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ s_ant = 0;
+ ee_mode = 0;
+ staid1_flags = 0;
+ tsf_up = 0;
+ tsf_lo = 0;
+ freq = 0;
+ mode = 0;
+
+ /*
+ * Save some registers before a reset
+ */
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ mode = AR5K_MODE_11A;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ mode = AR5K_MODE_11G;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ mode = AR5K_MODE_11B;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case CHANNEL_T:
+ mode = AR5K_MODE_11A_TURBO;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_TG:
+ if (ah->ah_version == AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "TurboG mode not available on 5211");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_11G_TURBO;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_XR:
+ if (ah->ah_version == AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "XR mode not available on 5211");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_XR;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
+ if (change_channel) {
+ /*
+ * Save frame sequence count
+ * For revs. after Oahu, only save
+ * seq num for DCU 0 (Global seq num)
+ */
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+ for (i = 0; i < 10; i++)
+ s_seq[i] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(i));
+
+ } else {
+ s_seq[0] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+
+ /* TSF accelerates on AR5211 durring reset
+ * As a workaround save it here and restore
+ * it later so that it's back in time after
+ * reset. This way it'll get re-synced on the
+ * next beacon without breaking ad-hoc.
+ *
+ * On AR5212 TSF is almost preserved across a
+ * reset so it stays back in time anyway and
+ * we don't have to save/restore it.
+ *
+ * XXX: Since this breaks power saving we have
+ * to disable power saving until we receive the
+ * next beacon, so we can resync beacon timers */
+ if (ah->ah_version == AR5K_AR5211) {
+ tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+ }
+ }
+
+ /* Save default antenna */
+ s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+ if (ah->ah_version == AR5K_AR5212) {
+ /* Restore normal 32/40MHz clock operation
+ * to avoid register access delay on certain
+ * PHY registers */
+ ath5k_hw_set_sleep_clock(ah, false);
+
+ /* Since we are going to write rf buffer
+ * check if we have any pending gain_F
+ * optimization settings */
+ if (change_channel && ah->ah_rf_banks != NULL)
+ ath5k_hw_gainf_calibrate(ah);
+ }
+ }
+
+ /*GPIOs*/
+ s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+ AR5K_PCICFG_LEDSTATE;
+ s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+ s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+ /* AR5K_STA_ID1 flags, only preserve antenna
+ * settings and ack/cts rate mode */
+ staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
+ (AR5K_STA_ID1_DEFAULT_ANTENNA |
+ AR5K_STA_ID1_DESC_ANTENNA |
+ AR5K_STA_ID1_RTS_DEF_ANTENNA |
+ AR5K_STA_ID1_ACKCTS_6MB |
+ AR5K_STA_ID1_BASE_RATE_11B |
+ AR5K_STA_ID1_SELFGEN_DEF_ANT);
+
+ /* Wakeup the device */
+ ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+ if (ret)
+ return ret;
+
+ /*
+ * Initialize operating mode
+ */
+ ah->ah_op_mode = op_mode;
+
+ /* PHY access enable */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+ else
+ ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
+ AR5K_PHY(0));
+
+ /* Write initial settings */
+ ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+ if (ret)
+ return ret;
+
+ /*
+ * 5211/5212 Specific
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+
+ /*
+ * Write initial RF gain settings
+ * This should work for both 5111/5112
+ */
+ ret = ath5k_hw_rfgain_init(ah, freq);
+ if (ret)
+ return ret;
+
+ mdelay(1);
+
+ /*
+ * Tweak initval settings for revised
+ * chipsets and add some more config
+ * bits
+ */
+ ath5k_hw_tweak_initval_settings(ah, channel);
+
+ /*
+ * Set TX power (FIXME)
+ */
+ ret = ath5k_hw_txpower(ah, channel, ee_mode,
+ AR5K_TUNE_DEFAULT_TXPOWER);
+ if (ret)
+ return ret;
+
+ /* Write rate duration table only on AR5212 and if
+ * virtual interface has already been brought up
+ * XXX: rethink this after new mode changes to
+ * mac80211 are integrated */
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_sc->vif != NULL)
+ ath5k_hw_write_rate_duration(ah, mode);
+
+ /*
+ * Write RF buffer
+ */
+ ret = ath5k_hw_rfregs_init(ah, channel, mode);
+ if (ret)
+ return ret;
+
+
+ /* Write OFDM timings on 5212*/
+ if (ah->ah_version == AR5K_AR5212 &&
+ channel->hw_value & CHANNEL_OFDM) {
+ ret = ath5k_hw_write_ofdm_timings(ah, channel);
+ if (ret)
+ return ret;
+ }
+
+ /*Enable/disable 802.11b mode on 5111
+ (enable 2111 frequency converter + CCK)*/
+ if (ah->ah_radio == AR5K_RF5111) {
+ if (mode == AR5K_MODE_11B)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_B_MODE);
+ }
+
+ /*
+ * In case a fixed antenna was set as default
+ * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+ * registers.
+ */
+ if (s_ant != 0) {
+ if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+ else /* 2 - Aux */
+ ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+ } else {
+ ant[0] = AR5K_ANT_FIXED_A;
+ ant[1] = AR5K_ANT_FIXED_B;
+ }
+
+ /* Commit values from EEPROM */
+ ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
+
+ } else {
+ /*
+ * For 5210 we do all initialization using
+ * initvals, so we don't have to modify
+ * any settings (5210 also only supports
+ * a/aturbo modes)
+ */
+ mdelay(1);
+ /* Disable phy and wait */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+ mdelay(1);
+ }
+
+ /*
+ * Restore saved values
+ */
+
+ /*DCU/Antenna selection not available on 5210*/
+ if (ah->ah_version != AR5K_AR5210) {
+
+ if (change_channel) {
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ for (i = 0; i < 10; i++)
+ ath5k_hw_reg_write(ah, s_seq[i],
+ AR5K_QUEUE_DCU_SEQNUM(i));
+ } else {
+ ath5k_hw_reg_write(ah, s_seq[0],
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+
+
+ if (ah->ah_version == AR5K_AR5211) {
+ ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+ ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
+ }
+ }
+
+ ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+ }
+
+ /* Ledstate */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+
+ /* Gpio settings */
+ ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+ ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+ /* Restore sta_id flags and preserve our mac address*/
+ ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
+ AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
+ AR5K_STA_ID1);
+
+
+ /*
+ * Configure PCU
+ */
+
+ /* Restore bssid and bssid mask */
+ /* XXX: add ah->aid once mac80211 gives this to us */
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+ /* Set PCU config */
+ ath5k_hw_set_opmode(ah);
+
+ /* Clear any pending interrupts
+ * PISR/SISR Not available on 5210 */
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+
+ /* Set RSSI/BRSSI thresholds
+ *
+ * Note: If we decide to set this value
+ * dynamicaly, have in mind that when AR5K_RSSI_THR
+ * register is read it might return 0x40 if we haven't
+ * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * So doing a save/restore procedure here isn't the right
+ * choice. Instead store it on ath5k_hw */
+ ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+ AR5K_TUNE_BMISS_THRES <<
+ AR5K_RSSI_THR_BMISS_S),
+ AR5K_RSSI_THR);
+
+ /* MIC QoS support */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+ ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+ ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+ }
+
+ /* QoS NOACK Policy */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+ AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) |
+ AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+ AR5K_QOS_NOACK);
+ }
+
+
+ /*
+ * Configure PHY
+ */
+
+ /* Set channel on PHY */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ /*
+ * Enable the PHY and wait until completion
+ * This includes BaseBand and Synthesizer
+ * activation.
+ */
+ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+ /*
+ * On 5211+ read activation -> rx delay
+ * and use it.
+ *
+ * TODO: Half/quarter rate support
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ u32 delay;
+ delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+ AR5K_PHY_RX_DELAY_M;
+ delay = (channel->hw_value & CHANNEL_CCK) ?
+ ((delay << 2) / 22) : (delay / 10);
+
+ udelay(100 + (2 * delay));
+ } else {
+ mdelay(1);
+ }
+
+ /*
+ * Perform ADC test to see if baseband is ready
+ * Set tx hold and check adc test register
+ */
+ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ udelay(200);
+ }
+ ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+
+ /*
+ * Start automatic gain control calibration
+ *
+ * During AGC calibration RX path is re-routed to
+ * a power detector so we don't receive anything.
+ *
+ * This method is used to calibrate some static offsets
+ * used together with on-the fly I/Q calibration (the
+ * one performed via ath5k_hw_phy_calibrate), that doesn't
+ * interrupt rx path.
+ *
+ * While rx path is re-routed to the power detector we also
+ * start a noise floor calibration, to measure the
+ * card's noise floor (the noise we measure when we are not
+ * transmiting or receiving anything).
+ *
+ * If we are in a noisy environment AGC calibration may time
+ * out and/or noise floor calibration might timeout.
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL);
+
+ /* At the same time start I/Q calibration for QAM constellation
+ * -no need for CCK- */
+ ah->ah_calibration = false;
+ if (!(mode == AR5K_MODE_11B)) {
+ ah->ah_calibration = true;
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_RUN);
+ }
+
+ /* Wait for gain calibration to finish (we check for I/Q calibration
+ * during ath5k_phy_calibrate) */
+ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL, 0, false)) {
+ ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ }
+
+ /*
+ * If we run NF calibration before AGC, it always times out.
+ * Binary HAL starts NF and AGC calibration at the same time
+ * and only waits for AGC to finish. Also if AGC or NF cal.
+ * times out, reset doesn't fail on binary HAL. I believe
+ * that's wrong because since rx path is routed to a detector,
+ * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
+ * enables noise floor calibration after offset calibration and if noise
+ * floor calibration fails, reset fails. I believe that's
+ * a better approach, we just need to find a polling interval
+ * that suits best, even if reset continues we need to make
+ * sure that rx path is ready.
+ */
+ ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+
+
+ /*
+ * Configure QCUs/DCUs
+ */
+
+ /* TODO: HW Compression support for data queues */
+ /* TODO: Burst prefetch for data queues */
+
+ /*
+ * Reset queues and start beacon timers at the end of the reset routine
+ * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+ * Note: If we want we can assign multiple qcus on one dcu.
+ */
+ for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+ ret = ath5k_hw_reset_tx_queue(ah, i);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc,
+ "failed to reset TX queue #%d\n", i);
+ return ret;
+ }
+ }
+
+
+ /*
+ * Configure DMA/Interrupts
+ */
+
+ /*
+ * Set Rx/Tx DMA Configuration
+ *
+ * Set standard DMA size (128). Note that
+ * a DMA size of 512 causes rx overruns and tx errors
+ * on pci-e cards (tested on 5424 but since rx overruns
+ * also occur on 5416/5418 with madwifi we set 128
+ * for all PCI-E cards to be safe).
+ *
+ * XXX: need to check 5210 for this
+ * TODO: Check out tx triger level, it's always 64 on dumps but I
+ * guess we can tweak it and see how it goes ;-)
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+ AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+ AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+ AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+ }
+
+ /* Pre-enable interrupts on 5211/5212*/
+ if (ah->ah_version != AR5K_AR5210)
+ ath5k_hw_set_imr(ah, ah->ah_imr);
+
+ /*
+ * Setup RFKill interrupt if rfkill flag is set on eeprom.
+ * TODO: Use gpio pin and polarity infos from eeprom
+ * TODO: Handle this in ath5k_intr because it'll result
+ * a nasty interrupt storm.
+ */
+#if 0
+ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+ ath5k_hw_set_gpio_input(ah, 0);
+ ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+ if (ah->ah_gpio[0] == 0)
+ ath5k_hw_set_gpio_intr(ah, 0, 1);
+ else
+ ath5k_hw_set_gpio_intr(ah, 0, 0);
+ }
+#endif
+
+ /* Enable 32KHz clock function for AR5212+ chips
+ * Set clocks to 32KHz operation and use an
+ * external 32KHz crystal when sleeping if one
+ * exists */
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_set_sleep_clock(ah, true);
+
+ /*
+ * Disable beacons and reset the register
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+ AR5K_BEACON_RESET_TSF);
+
+ return 0;
+}
+
+#undef _ATH5K_RESET
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
new file mode 100644
index 000000000000..e50baff66175
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -0,0 +1,1181 @@
+/*
+ * RF Buffer handling functions
+ *
+ * Copyright (c) 2009 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+
+/*
+ * There are some special registers on the RF chip
+ * that control various operation settings related mostly to
+ * the analog parts (channel, gain adjustment etc).
+ *
+ * We don't write on those registers directly but
+ * we send a data packet on the chip, using a special register,
+ * that holds all the settings we need. After we 've sent the
+ * data packet, we write on another special register to notify hw
+ * to apply the settings. This is done so that control registers
+ * can be dynamicaly programmed during operation and the settings
+ * are applied faster on the hw.
+ *
+ * We call each data packet an "RF Bank" and all the data we write
+ * (all RF Banks) "RF Buffer". This file holds initial RF Buffer
+ * data for the different RF chips, and various info to match RF
+ * Buffer offsets with specific RF registers so that we can access
+ * them. We tweak these settings on rfregs_init function.
+ *
+ * Also check out reg.h and U.S. Patent 6677779 B1 (about buffer
+ * registers and control registers):
+ *
+ * http://www.google.com/patents?id=qNURAAAAEBAJ
+ */
+
+
+/*
+ * Struct to hold default mode specific RF
+ * register values (RF Banks)
+ */
+struct ath5k_ini_rfbuffer {
+ u8 rfb_bank; /* RF Bank number */
+ u16 rfb_ctrl_register; /* RF Buffer control register */
+ u32 rfb_mode_data[5]; /* RF Buffer data for each mode */
+};
+
+/*
+ * Struct to hold RF Buffer field
+ * infos used to access certain RF
+ * analog registers
+ */
+struct ath5k_rfb_field {
+ u8 len; /* Field length */
+ u16 pos; /* Offset on the raw packet */
+ u8 col; /* Column -used for shifting */
+};
+
+/*
+ * RF analog register definition
+ */
+struct ath5k_rf_reg {
+ u8 bank; /* RF Buffer Bank number */
+ u8 index; /* Register's index on rf_regs_idx */
+ struct ath5k_rfb_field field; /* RF Buffer field for this register */
+};
+
+/* Map RF registers to indexes
+ * We do this to handle common bits and make our
+ * life easier by using an index for each register
+ * instead of a full rfb_field */
+enum ath5k_rf_regs_idx {
+ /* BANK 6 */
+ AR5K_RF_OB_2GHZ = 0,
+ AR5K_RF_OB_5GHZ,
+ AR5K_RF_DB_2GHZ,
+ AR5K_RF_DB_5GHZ,
+ AR5K_RF_FIXED_BIAS_A,
+ AR5K_RF_FIXED_BIAS_B,
+ AR5K_RF_PWD_XPD,
+ AR5K_RF_XPD_SEL,
+ AR5K_RF_XPD_GAIN,
+ AR5K_RF_PD_GAIN_LO,
+ AR5K_RF_PD_GAIN_HI,
+ AR5K_RF_HIGH_VC_CP,
+ AR5K_RF_MID_VC_CP,
+ AR5K_RF_LOW_VC_CP,
+ AR5K_RF_PUSH_UP,
+ AR5K_RF_PAD2GND,
+ AR5K_RF_XB2_LVL,
+ AR5K_RF_XB5_LVL,
+ AR5K_RF_PWD_ICLOBUF_2G,
+ AR5K_RF_PWD_84,
+ AR5K_RF_PWD_90,
+ AR5K_RF_PWD_130,
+ AR5K_RF_PWD_131,
+ AR5K_RF_PWD_132,
+ AR5K_RF_PWD_136,
+ AR5K_RF_PWD_137,
+ AR5K_RF_PWD_138,
+ AR5K_RF_PWD_166,
+ AR5K_RF_PWD_167,
+ AR5K_RF_DERBY_CHAN_SEL_MODE,
+ /* BANK 7 */
+ AR5K_RF_GAIN_I,
+ AR5K_RF_PLO_SEL,
+ AR5K_RF_RFGAIN_SEL,
+ AR5K_RF_RFGAIN_STEP,
+ AR5K_RF_WAIT_S,
+ AR5K_RF_WAIT_I,
+ AR5K_RF_MAX_TIME,
+ AR5K_RF_MIXVGA_OVR,
+ AR5K_RF_MIXGAIN_OVR,
+ AR5K_RF_MIXGAIN_STEP,
+ AR5K_RF_PD_DELAY_A,
+ AR5K_RF_PD_DELAY_B,
+ AR5K_RF_PD_DELAY_XR,
+ AR5K_RF_PD_PERIOD_A,
+ AR5K_RF_PD_PERIOD_B,
+ AR5K_RF_PD_PERIOD_XR,
+};
+
+
+/*******************\
+* RF5111 (Sombrero) *
+\*******************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 }
+#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 }
+
+#define AR5K_RF5111_OB_5GHZ { 3, 104, 0 }
+#define AR5K_RF5111_DB_5GHZ { 3, 107, 0 }
+
+#define AR5K_RF5111_PWD_XPD { 1, 95, 0 }
+#define AR5K_RF5111_XPD_GAIN { 4, 96, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5111_PWD(_n) { 1, (135 - _n), 3 }
+
+/* BANK 7 len pos col */
+#define AR5K_RF5111_GAIN_I { 6, 29, 0 }
+#define AR5K_RF5111_PLO_SEL { 1, 4, 0 }
+#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 }
+#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 }
+/* Only on AR5212 BaseBand and up */
+#define AR5K_RF5111_WAIT_S { 5, 19, 0 }
+#define AR5K_RF5111_WAIT_I { 5, 24, 0 }
+#define AR5K_RF5111_MAX_TIME { 2, 49, 0 }
+
+static const struct ath5k_rf_reg rf_regs_5111[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5111_DB_5GHZ},
+ {6, AR5K_RF_PWD_XPD, AR5K_RF5111_PWD_XPD},
+ {6, AR5K_RF_XPD_GAIN, AR5K_RF5111_XPD_GAIN},
+ {6, AR5K_RF_PWD_84, AR5K_RF5111_PWD(84)},
+ {6, AR5K_RF_PWD_90, AR5K_RF5111_PWD(90)},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5111_GAIN_I},
+ {7, AR5K_RF_PLO_SEL, AR5K_RF5111_PLO_SEL},
+ {7, AR5K_RF_RFGAIN_SEL, AR5K_RF5111_RFGAIN_SEL},
+ {7, AR5K_RF_RFGAIN_STEP, AR5K_RF5111_RFGAIN_STEP},
+ {7, AR5K_RF_WAIT_S, AR5K_RF5111_WAIT_S},
+ {7, AR5K_RF_WAIT_I, AR5K_RF5111_WAIT_I},
+ {7, AR5K_RF_MAX_TIME, AR5K_RF5111_MAX_TIME}
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5111[] = {
+ { 0, 0x989c,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 0, 0x989c,
+ { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } },
+ { 0, 0x989c,
+ { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } },
+ { 0, 0x98d4,
+ { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } },
+ { 1, 0x98d4,
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d4,
+ { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } },
+ { 3, 0x98d8,
+ { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c,
+ { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } },
+ { 6, 0x989c,
+ { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } },
+ { 6, 0x989c,
+ { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } },
+ { 6, 0x989c,
+ { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } },
+ { 6, 0x989c,
+ { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } },
+ { 6, 0x98d4,
+ { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } },
+ { 7, 0x989c,
+ { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } },
+ { 7, 0x989c,
+ { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
+ { 7, 0x989c,
+ { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
+ { 7, 0x989c,
+ { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } },
+ { 7, 0x989c,
+ { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } },
+ { 7, 0x989c,
+ { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } },
+ { 7, 0x989c,
+ { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/***********************\
+* RF5112/RF2112 (Derby) *
+\***********************/
+
+/* BANK 7 (Common) len pos col */
+#define AR5K_RF5112X_GAIN_I { 6, 14, 0 }
+#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 }
+#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 }
+#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 }
+#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 }
+#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 }
+#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 }
+#define AR5K_RF5112X_PD_PERIOD_A { 4, 70, 0 }
+#define AR5K_RF5112X_PD_PERIOD_B { 4, 74, 0 }
+#define AR5K_RF5112X_PD_PERIOD_XR { 4, 78, 0 }
+
+/* RFX112 (Derby 1) */
+
+/* BANK 6 len pos col */
+#define AR5K_RF5112_OB_2GHZ { 3, 269, 0 }
+#define AR5K_RF5112_DB_2GHZ { 3, 272, 0 }
+
+#define AR5K_RF5112_OB_5GHZ { 3, 261, 0 }
+#define AR5K_RF5112_DB_5GHZ { 3, 264, 0 }
+
+#define AR5K_RF5112_FIXED_BIAS_A { 1, 260, 0 }
+#define AR5K_RF5112_FIXED_BIAS_B { 1, 259, 0 }
+
+#define AR5K_RF5112_XPD_SEL { 1, 284, 0 }
+#define AR5K_RF5112_XPD_GAIN { 2, 252, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 }
+
+static const struct ath5k_rf_reg rf_regs_5112[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5112_DB_5GHZ},
+ {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112_FIXED_BIAS_A},
+ {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112_FIXED_BIAS_B},
+ {6, AR5K_RF_XPD_SEL, AR5K_RF5112_XPD_SEL},
+ {6, AR5K_RF_XPD_GAIN, AR5K_RF5112_XPD_GAIN},
+ {6, AR5K_RF_PWD_130, AR5K_RF5112_PWD(130)},
+ {6, AR5K_RF_PWD_131, AR5K_RF5112_PWD(131)},
+ {6, AR5K_RF_PWD_132, AR5K_RF5112_PWD(132)},
+ {6, AR5K_RF_PWD_136, AR5K_RF5112_PWD(136)},
+ {6, AR5K_RF_PWD_137, AR5K_RF5112_PWD(137)},
+ {6, AR5K_RF_PWD_138, AR5K_RF5112_PWD(138)},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
+ {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
+ {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
+ {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
+ {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
+ {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
+ {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
+ {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
+ {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
+ {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5112[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
+ { 3, 0x98dc,
+ { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
+ { 6, 0x989c,
+ { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } },
+ { 6, 0x989c,
+ { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } },
+ { 6, 0x989c,
+ { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } },
+ { 6, 0x989c,
+ { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } },
+ { 6, 0x989c,
+ { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c,
+ { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c,
+ { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } },
+ { 6, 0x989c,
+ { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } },
+ { 6, 0x989c,
+ { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c,
+ { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
+ { 6, 0x989c,
+ { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } },
+ { 6, 0x989c,
+ { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } },
+ { 6, 0x989c,
+ { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
+ { 6, 0x989c,
+ { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } },
+ { 6, 0x989c,
+ { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c,
+ { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c,
+ { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } },
+ { 6, 0x989c,
+ { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } },
+ { 6, 0x989c,
+ { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
+ { 6, 0x989c,
+ { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } },
+ { 6, 0x989c,
+ { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } },
+ { 6, 0x989c,
+ { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } },
+ { 6, 0x989c,
+ { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } },
+ { 6, 0x989c,
+ { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } },
+ { 6, 0x989c,
+ { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } },
+ { 6, 0x989c,
+ { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } },
+ { 6, 0x989c,
+ { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } },
+ { 6, 0x989c,
+ { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } },
+ { 6, 0x989c,
+ { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } },
+ { 6, 0x98d0,
+ { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } },
+ { 7, 0x989c,
+ { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
+ { 7, 0x989c,
+ { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
+ { 7, 0x989c,
+ { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } },
+ { 7, 0x989c,
+ { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
+ { 7, 0x989c,
+ { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } },
+ { 7, 0x989c,
+ { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
+ { 7, 0x989c,
+ { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
+ { 7, 0x989c,
+ { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } },
+ { 7, 0x989c,
+ { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } },
+ { 7, 0x989c,
+ { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
+ { 7, 0x989c,
+ { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
+ { 7, 0x989c,
+ { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
+ { 7, 0x98c4,
+ { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+/* RFX112A (Derby 2) */
+
+/* BANK 6 len pos col */
+#define AR5K_RF5112A_OB_2GHZ { 3, 287, 0 }
+#define AR5K_RF5112A_DB_2GHZ { 3, 290, 0 }
+
+#define AR5K_RF5112A_OB_5GHZ { 3, 279, 0 }
+#define AR5K_RF5112A_DB_5GHZ { 3, 282, 0 }
+
+#define AR5K_RF5112A_FIXED_BIAS_A { 1, 278, 0 }
+#define AR5K_RF5112A_FIXED_BIAS_B { 1, 277, 0 }
+
+#define AR5K_RF5112A_XPD_SEL { 1, 302, 0 }
+#define AR5K_RF5112A_PDGAINLO { 2, 270, 0 }
+#define AR5K_RF5112A_PDGAINHI { 2, 257, 0 }
+
+/* Access to PWD registers */
+#define AR5K_RF5112A_PWD(_n) { 1, (306 - _n), 3 }
+
+/* Voltage regulators */
+#define AR5K_RF5112A_HIGH_VC_CP { 2, 90, 2 }
+#define AR5K_RF5112A_MID_VC_CP { 2, 92, 2 }
+#define AR5K_RF5112A_LOW_VC_CP { 2, 94, 2 }
+#define AR5K_RF5112A_PUSH_UP { 1, 254, 2 }
+
+/* Power consumption */
+#define AR5K_RF5112A_PAD2GND { 1, 281, 1 }
+#define AR5K_RF5112A_XB2_LVL { 2, 1, 3 }
+#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 }
+
+static const struct ath5k_rf_reg rf_regs_5112a[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5112A_DB_5GHZ},
+ {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112A_FIXED_BIAS_A},
+ {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112A_FIXED_BIAS_B},
+ {6, AR5K_RF_XPD_SEL, AR5K_RF5112A_XPD_SEL},
+ {6, AR5K_RF_PD_GAIN_LO, AR5K_RF5112A_PDGAINLO},
+ {6, AR5K_RF_PD_GAIN_HI, AR5K_RF5112A_PDGAINHI},
+ {6, AR5K_RF_PWD_130, AR5K_RF5112A_PWD(130)},
+ {6, AR5K_RF_PWD_131, AR5K_RF5112A_PWD(131)},
+ {6, AR5K_RF_PWD_132, AR5K_RF5112A_PWD(132)},
+ {6, AR5K_RF_PWD_136, AR5K_RF5112A_PWD(136)},
+ {6, AR5K_RF_PWD_137, AR5K_RF5112A_PWD(137)},
+ {6, AR5K_RF_PWD_138, AR5K_RF5112A_PWD(138)},
+ {6, AR5K_RF_PWD_166, AR5K_RF5112A_PWD(166)},
+ {6, AR5K_RF_PWD_167, AR5K_RF5112A_PWD(167)},
+ {6, AR5K_RF_HIGH_VC_CP, AR5K_RF5112A_HIGH_VC_CP},
+ {6, AR5K_RF_MID_VC_CP, AR5K_RF5112A_MID_VC_CP},
+ {6, AR5K_RF_LOW_VC_CP, AR5K_RF5112A_LOW_VC_CP},
+ {6, AR5K_RF_PUSH_UP, AR5K_RF5112A_PUSH_UP},
+ {6, AR5K_RF_PAD2GND, AR5K_RF5112A_PAD2GND},
+ {6, AR5K_RF_XB2_LVL, AR5K_RF5112A_XB2_LVL},
+ {6, AR5K_RF_XB5_LVL, AR5K_RF5112A_XB5_LVL},
+ {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
+ {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
+ {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
+ {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
+ {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
+ {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
+ {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
+ {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
+ {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
+ {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } },
+ { 6, 0x989c,
+ { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c,
+ { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } },
+ { 6, 0x989c,
+ { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } },
+ { 6, 0x989c,
+ { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } },
+ { 6, 0x989c,
+ { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } },
+ { 6, 0x989c,
+ { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } },
+ { 6, 0x989c,
+ { 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000 } },
+ { 6, 0x989c,
+ { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } },
+ { 6, 0x989c,
+ { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+ { 6, 0x989c,
+ { 0x02190000, 0x02190000, 0x02190000, 0x02190000, 0x02190000 } },
+ { 6, 0x989c,
+ { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
+ { 6, 0x989c,
+ { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } },
+ { 6, 0x989c,
+ { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } },
+ { 6, 0x989c,
+ { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } },
+ { 6, 0x989c,
+ { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c,
+ { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+ { 6, 0x989c,
+ { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } },
+ { 6, 0x989c,
+ { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } },
+ { 6, 0x989c,
+ { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+ { 6, 0x989c,
+ { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } },
+ { 6, 0x989c,
+ { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } },
+ { 6, 0x989c,
+ { 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080 } },
+ { 6, 0x989c,
+ { 0x00270019, 0x00270019, 0x00270019, 0x00270019, 0x00270019 } },
+ { 6, 0x989c,
+ { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } },
+ { 6, 0x989c,
+ { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } },
+ { 6, 0x989c,
+ { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } },
+ { 6, 0x989c,
+ { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } },
+ { 6, 0x989c,
+ { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } },
+ { 6, 0x98d8,
+ { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } },
+ { 7, 0x989c,
+ { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
+ { 7, 0x989c,
+ { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
+ { 7, 0x989c,
+ { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } },
+ { 7, 0x989c,
+ { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
+ { 7, 0x989c,
+ { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } },
+ { 7, 0x989c,
+ { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
+ { 7, 0x989c,
+ { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
+ { 7, 0x989c,
+ { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } },
+ { 7, 0x989c,
+ { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } },
+ { 7, 0x989c,
+ { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
+ { 7, 0x989c,
+ { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
+ { 7, 0x989c,
+ { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
+ { 7, 0x98c4,
+ { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+
+
+/******************\
+* RF2413 (Griffin) *
+\******************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 }
+#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2413[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ},
+};
+
+/* Default mode specific settings
+ * XXX: a/aTurbo ???
+ */
+static const struct ath5k_ini_rfbuffer rfb_2413[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x03000000, 0x03000000, 0x03000000, 0x03000000, 0x03000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x40400000, 0x40400000, 0x40400000, 0x40400000, 0x40400000 } },
+ { 6, 0x989c,
+ { 0x65050000, 0x65050000, 0x65050000, 0x65050000, 0x65050000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00420000, 0x00420000, 0x00420000, 0x00420000, 0x00420000 } },
+ { 6, 0x989c,
+ { 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000 } },
+ { 6, 0x989c,
+ { 0x00030000, 0x00030000, 0x00030000, 0x00030000, 0x00030000 } },
+ { 6, 0x989c,
+ { 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000 } },
+ { 6, 0x989c,
+ { 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000 } },
+ { 6, 0x989c,
+ { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } },
+ { 6, 0x989c,
+ { 0x04220000, 0x04220000, 0x04220000, 0x04220000, 0x04220000 } },
+ { 6, 0x989c,
+ { 0x00230018, 0x00230018, 0x00230018, 0x00230018, 0x00230018 } },
+ { 6, 0x989c,
+ { 0x00280000, 0x00280000, 0x00280060, 0x00280060, 0x00280060 } },
+ { 6, 0x989c,
+ { 0x005000c0, 0x005000c0, 0x005000c3, 0x005000c3, 0x005000c3 } },
+ { 6, 0x989c,
+ { 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f } },
+ { 6, 0x989c,
+ { 0x00000458, 0x00000458, 0x00000458, 0x00000458, 0x00000458 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000 } },
+ { 6, 0x98d8,
+ { 0x00400230, 0x00400230, 0x00400230, 0x00400230, 0x00400230 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/***************************\
+* RF2315/RF2316 (Cobra SoC) *
+\***************************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 }
+#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2316[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_2316[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000 } },
+ { 6, 0x989c,
+ { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
+ { 6, 0x989c,
+ { 0x02000000, 0x02000000, 0x02000000, 0x02000000, 0x02000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x95150000, 0x95150000, 0x95150000, 0x95150000, 0x95150000 } },
+ { 6, 0x989c,
+ { 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00080000, 0x00080000, 0x00080000, 0x00080000, 0x00080000 } },
+ { 6, 0x989c,
+ { 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000 } },
+ { 6, 0x989c,
+ { 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000 } },
+ { 6, 0x989c,
+ { 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000 } },
+ { 6, 0x989c,
+ { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
+ { 6, 0x989c,
+ { 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000 } },
+ { 6, 0x989c,
+ { 0x10880000, 0x10880000, 0x10880000, 0x10880000, 0x10880000 } },
+ { 6, 0x989c,
+ { 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060 } },
+ { 6, 0x989c,
+ { 0x00a00000, 0x00a00000, 0x00a00080, 0x00a00080, 0x00a00080 } },
+ { 6, 0x989c,
+ { 0x00400000, 0x00400000, 0x0040000d, 0x0040000d, 0x0040000d } },
+ { 6, 0x989c,
+ { 0x00110400, 0x00110400, 0x00110400, 0x00110400, 0x00110400 } },
+ { 6, 0x989c,
+ { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
+ { 6, 0x989c,
+ { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
+ { 6, 0x989c,
+ { 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00 } },
+ { 6, 0x989c,
+ { 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8 } },
+ { 6, 0x98c0,
+ { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/******************************\
+* RF5413/RF5424 (Eagle/Condor) *
+\******************************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF5413_OB_2GHZ { 3, 241, 0 }
+#define AR5K_RF5413_DB_2GHZ { 3, 238, 0 }
+
+#define AR5K_RF5413_OB_5GHZ { 3, 247, 0 }
+#define AR5K_RF5413_DB_5GHZ { 3, 244, 0 }
+
+#define AR5K_RF5413_PWD_ICLOBUF2G { 3, 131, 3 }
+#define AR5K_RF5413_DERBY_CHAN_SEL_MODE { 1, 291, 2 }
+
+static const struct ath5k_rf_reg rf_regs_5413[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF5413_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF5413_DB_2GHZ},
+ {6, AR5K_RF_OB_5GHZ, AR5K_RF5413_OB_5GHZ},
+ {6, AR5K_RF_DB_5GHZ, AR5K_RF5413_DB_5GHZ},
+ {6, AR5K_RF_PWD_ICLOBUF_2G, AR5K_RF5413_PWD_ICLOBUF2G},
+ {6, AR5K_RF_DERBY_CHAN_SEL_MODE, AR5K_RF5413_DERBY_CHAN_SEL_MODE},
+};
+
+/* Default mode specific settings */
+static const struct ath5k_ini_rfbuffer rfb_5413[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
+ { 3, 0x98dc,
+ { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } },
+ { 6, 0x989c,
+ { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } },
+ { 6, 0x989c,
+ { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } },
+ { 6, 0x989c,
+ { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } },
+ { 6, 0x989c,
+ { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
+ { 6, 0x989c,
+ { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
+ { 6, 0x989c,
+ { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+ { 6, 0x989c,
+ { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } },
+ { 6, 0x989c,
+ { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } },
+ { 6, 0x989c,
+ { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
+ { 6, 0x989c,
+ { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } },
+ { 6, 0x989c,
+ { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } },
+ { 6, 0x989c,
+ { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } },
+ { 6, 0x989c,
+ { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
+ { 6, 0x989c,
+ { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } },
+ { 6, 0x989c,
+ { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
+ { 6, 0x989c,
+ { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } },
+ { 6, 0x989c,
+ { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } },
+ { 6, 0x989c,
+ { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } },
+ { 6, 0x989c,
+ { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } },
+ { 6, 0x989c,
+ { 0x00510040, 0x00510040, 0x00510040, 0x00510040, 0x00510040 } },
+ { 6, 0x989c,
+ { 0x005000da, 0x005000da, 0x005000da, 0x005000da, 0x005000da } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } },
+ { 6, 0x989c,
+ { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00002c00 } },
+ { 6, 0x98c8,
+ { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+
+/***************************\
+* RF2425/RF2417 (Swan/Nala) *
+* AR2317 (Spider SoC) *
+\***************************/
+
+/* BANK 6 len pos col */
+#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 }
+#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 }
+
+static const struct ath5k_rf_reg rf_regs_2425[] = {
+ {6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ},
+ {6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ},
+};
+
+/* Default mode specific settings
+ * XXX: a/aTurbo ?
+ */
+static const struct ath5k_ini_rfbuffer rfb_2425[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c,
+ { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c,
+ { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c,
+ { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c,
+ { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
+ { 6, 0x989c,
+ { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
+ { 6, 0x989c,
+ { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c,
+ { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
+ { 6, 0x989c,
+ { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c,
+ { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
+ { 6, 0x989c,
+ { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c,
+ { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
+ { 6, 0x98c4,
+ { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+/*
+ * TODO: Handle the few differences with swan during
+ * bank modification and get rid of this
+ */
+static const struct ath5k_ini_rfbuffer rfb_2317[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c,
+ { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c,
+ { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c,
+ { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c,
+ { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
+ { 6, 0x989c,
+ { 0x00140100, 0x00140100, 0x00140100, 0x00140100, 0x00140100 } },
+ { 6, 0x989c,
+ { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c,
+ { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
+ { 6, 0x989c,
+ { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c,
+ { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
+ { 6, 0x989c,
+ { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c,
+ { 0x00009688, 0x00009688, 0x00009688, 0x00009688, 0x00009688 } },
+ { 6, 0x98c4,
+ { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+/*
+ * TODO: Handle the few differences with swan during
+ * bank modification and get rid of this
+ * XXX: a/aTurbo ?
+ */
+static const struct ath5k_ini_rfbuffer rfb_2417[] = {
+ { 1, 0x98d4,
+ /* mode a/XR mode aTurbo mode b mode g mode gTurbo */
+ { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+ { 2, 0x98d0,
+ { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
+ { 3, 0x98dc,
+ { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+ { 6, 0x989c,
+ { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
+ { 6, 0x989c,
+ { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
+ { 6, 0x989c,
+ { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
+ { 6, 0x989c,
+ { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
+ { 6, 0x989c,
+ { 0x00e70000, 0x00e70000, 0x80e70000, 0x80e70000, 0x00e70000 } },
+ { 6, 0x989c,
+ { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
+ { 6, 0x989c,
+ { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
+ { 6, 0x989c,
+ { 0x0007001a, 0x0007001a, 0x0207001a, 0x0207001a, 0x0007001a } },
+ { 6, 0x989c,
+ { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
+ { 6, 0x989c,
+ { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
+ { 6, 0x989c,
+ { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+ { 6, 0x989c,
+ { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
+ { 6, 0x989c,
+ { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
+ { 6, 0x98c4,
+ { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
+ { 7, 0x989c,
+ { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+ { 7, 0x989c,
+ { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+ { 7, 0x98cc,
+ { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
new file mode 100644
index 000000000000..1354d8c392c8
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
@@ -0,0 +1,516 @@
+/*
+ * RF Gain optimization
+ *
+ * Copyright (c) 2004-2009 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Mode-specific RF Gain table (64bytes) for RF5111/5112
+ * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial
+ * RF Gain values are included in AR5K_AR5210_INI)
+ */
+struct ath5k_ini_rfgain {
+ u16 rfg_register; /* RF Gain register address */
+ u32 rfg_value[2]; /* [freq (see below)] */
+};
+
+/* Initial RF Gain settings for RF5111 */
+static const struct ath5k_ini_rfgain rfgain_5111[] = {
+ /* 5Ghz 2Ghz */
+ { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } },
+ { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } },
+ { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } },
+ { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } },
+ { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } },
+ { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } },
+ { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } },
+ { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } },
+ { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } },
+ { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } },
+ { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } },
+ { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } },
+ { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } },
+ { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } },
+ { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } },
+ { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } },
+ { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } },
+ { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } },
+ { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } },
+ { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } },
+ { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } },
+ { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } },
+ { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } },
+ { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } },
+ { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } },
+ { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } },
+ { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } },
+ { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } },
+ { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } },
+ { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } },
+ { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } },
+ { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } },
+ { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } },
+ { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } },
+ { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } },
+ { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } },
+ { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } },
+ { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } },
+ { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } },
+ { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } },
+ { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } },
+ { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } },
+ { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } },
+ { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } },
+ { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } },
+ { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } },
+ { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } },
+ { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } },
+};
+
+/* Initial RF Gain settings for RF5112 */
+static const struct ath5k_ini_rfgain rfgain_5112[] = {
+ /* 5Ghz 2Ghz */
+ { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } },
+ { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } },
+ { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } },
+ { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } },
+ { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } },
+ { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } },
+ { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } },
+ { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } },
+ { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } },
+ { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } },
+ { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } },
+ { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } },
+ { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } },
+ { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } },
+ { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } },
+ { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } },
+ { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } },
+ { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } },
+ { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } },
+ { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } },
+ { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } },
+ { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } },
+ { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } },
+ { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } },
+ { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } },
+ { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } },
+ { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } },
+ { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } },
+ { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } },
+ { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } },
+ { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } },
+ { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } },
+ { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } },
+ { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } },
+ { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } },
+ { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } },
+ { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } },
+ { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } },
+ { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } },
+ { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } },
+ { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } },
+ { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } },
+ { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } },
+ { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } },
+ { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } },
+ { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } },
+ { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } },
+ { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } },
+ { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } },
+ { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } },
+ { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } },
+ { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } },
+ { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } },
+ { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } },
+ { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } },
+ { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } },
+};
+
+/* Initial RF Gain settings for RF2413 */
+static const struct ath5k_ini_rfgain rfgain_2413[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000168 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x000001a8 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x000001e8 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x00000028 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000068 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x00000190 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x000001d0 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x00000010 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x00000050 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000090 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x00000191 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000001d1 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x00000011 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x00000051 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x00000091 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x00000178 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x000001b8 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x000001f8 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x00000038 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x00000078 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x00000199 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x000001d9 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x00000019 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x00000059 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x00000099 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000d9 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } },
+};
+
+/* Initial RF Gain settings for AR2316 */
+static const struct ath5k_ini_rfgain rfgain_2316[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x000000c0 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000000e0 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x000000e0 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000128 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x00000168 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x000001a8 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x000001e8 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000028 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000068 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000000a8 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x000000e8 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x000000e8 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000130 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x00000130 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x00000170 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x000001b0 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x000001f0 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000030 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x00000070 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000000b0 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f0 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f0 } },
+};
+
+
+/* Initial RF Gain settings for RF5413 */
+static const struct ath5k_ini_rfgain rfgain_5413[] = {
+ /* 5Ghz 2Ghz */
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } },
+ { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } },
+ { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } },
+ { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } },
+ { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } },
+ { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } },
+ { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } },
+ { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } },
+ { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } },
+ { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } },
+ { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } },
+ { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } },
+ { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } },
+ { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } },
+ { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } },
+ { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } },
+ { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } },
+ { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } },
+ { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } },
+ { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } },
+ { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } },
+ { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } },
+ { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } },
+ { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } },
+ { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } },
+ { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } },
+ { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } },
+ { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } },
+ { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } },
+ { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } },
+ { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } },
+ { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } },
+};
+
+
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000000, 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x00000000, 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000000, 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000000, 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x00000000, 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x00000000, 0x000001b0 } },
+ { AR5K_RF_GAIN(19), { 0x00000000, 0x000001f0 } },
+ { AR5K_RF_GAIN(20), { 0x00000000, 0x00000030 } },
+ { AR5K_RF_GAIN(21), { 0x00000000, 0x00000070 } },
+ { AR5K_RF_GAIN(22), { 0x00000000, 0x00000171 } },
+ { AR5K_RF_GAIN(23), { 0x00000000, 0x000001b1 } },
+ { AR5K_RF_GAIN(24), { 0x00000000, 0x000001f1 } },
+ { AR5K_RF_GAIN(25), { 0x00000000, 0x00000031 } },
+ { AR5K_RF_GAIN(26), { 0x00000000, 0x00000071 } },
+ { AR5K_RF_GAIN(27), { 0x00000000, 0x000001b8 } },
+ { AR5K_RF_GAIN(28), { 0x00000000, 0x000001f8 } },
+ { AR5K_RF_GAIN(29), { 0x00000000, 0x00000038 } },
+ { AR5K_RF_GAIN(30), { 0x00000000, 0x00000078 } },
+ { AR5K_RF_GAIN(31), { 0x00000000, 0x000000b8 } },
+ { AR5K_RF_GAIN(32), { 0x00000000, 0x000001b9 } },
+ { AR5K_RF_GAIN(33), { 0x00000000, 0x000001f9 } },
+ { AR5K_RF_GAIN(34), { 0x00000000, 0x00000039 } },
+ { AR5K_RF_GAIN(35), { 0x00000000, 0x00000079 } },
+ { AR5K_RF_GAIN(36), { 0x00000000, 0x000000b9 } },
+ { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } },
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111 4
+#define AR5K_GAIN_CRN_FIX_BITS_5112 7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20
+#define AR5K_GAIN_CCK_PROBE_CORR 5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15
+#define AR5K_GAIN_STEP_COUNT 10
+
+/* Check if our current measurement is inside our
+ * current variable attenuation window */
+#define AR5K_GAIN_CHECK_ADJUST(_g) \
+ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+struct ath5k_gain_opt_step {
+ s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+ s8 gos_gain;
+};
+
+struct ath5k_gain_opt {
+ u8 go_default;
+ u8 go_steps_count;
+ const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT];
+};
+
+/*
+ * Parameters on gos_param:
+ * 1) Tx clip PHY register
+ * 2) PWD 90 RF register
+ * 3) PWD 84 RF register
+ * 4) RFGainSel RF register
+ */
+static const struct ath5k_gain_opt rfgain_opt_5111 = {
+ 4,
+ 9,
+ {
+ { { 4, 1, 1, 1 }, 6 },
+ { { 4, 0, 1, 1 }, 4 },
+ { { 3, 1, 1, 1 }, 3 },
+ { { 4, 0, 0, 1 }, 1 },
+ { { 4, 1, 1, 0 }, 0 },
+ { { 4, 0, 1, 0 }, -2 },
+ { { 3, 1, 1, 0 }, -3 },
+ { { 4, 0, 0, 0 }, -4 },
+ { { 2, 1, 1, 0 }, -6 }
+ }
+};
+
+/*
+ * Parameters on gos_param:
+ * 1) Mixgain ovr RF register
+ * 2) PWD 138 RF register
+ * 3) PWD 137 RF register
+ * 4) PWD 136 RF register
+ * 5) PWD 132 RF register
+ * 6) PWD 131 RF register
+ * 7) PWD 130 RF register
+ */
+static const struct ath5k_gain_opt rfgain_opt_5112 = {
+ 1,
+ 8,
+ {
+ { { 3, 0, 0, 0, 0, 0, 0 }, 6 },
+ { { 2, 0, 0, 0, 0, 0, 0 }, 0 },
+ { { 1, 0, 0, 0, 0, 0, 0 }, -3 },
+ { { 0, 0, 0, 0, 0, 0, 0 }, -6 },
+ { { 0, 1, 1, 0, 0, 0, 0 }, -8 },
+ { { 0, 1, 1, 0, 1, 1, 0 }, -10 },
+ { { 0, 1, 0, 1, 1, 1, 0 }, -13 },
+ { { 0, 1, 0, 1, 1, 0, 1 }, -16 },
+ }
+};
+