summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c215
1 files changed, 215 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
new file mode 100644
index 000000000000..159490f5a111
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: ISC
+/* Initialize Owl Emulation Devices
+ *
+ * Copyright (C) 2016 Christian Lamparter <chunkeey@gmail.com>
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
+ * need to be able to initialize the PCIe wifi device. Normally, this is done
+ * during the early stages as a pci quirk.
+ * However, this isn't possible for devices which have the init code for the
+ * Atheros chip stored on UBI Volume on NAND. Hence, this module can be used to
+ * initialize the chip when the user-space is ready to extract the init code.
+ */
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/completion.h>
+#include <linux/etherdevice.h>
+#include <linux/firmware.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+struct owl_ctx {
+ struct completion eeprom_load;
+};
+
+#define EEPROM_FILENAME_LEN 100
+
+#define AR5416_EEPROM_MAGIC 0xa55a
+
+static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
+ size_t cal_len)
+{
+ void __iomem *mem;
+ const void *cal_end = (void *)cal_data + cal_len;
+ const struct {
+ u16 reg;
+ u16 low_val;
+ u16 high_val;
+ } __packed * data;
+ u16 cmd;
+ u32 bar0;
+ bool swap_needed = false;
+
+ if (*cal_data != AR5416_EEPROM_MAGIC) {
+ if (*cal_data != swab16(AR5416_EEPROM_MAGIC)) {
+ dev_err(&pdev->dev, "invalid calibration data\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(&pdev->dev, "calibration data needs swapping\n");
+ swap_needed = true;
+ }
+
+ dev_info(&pdev->dev, "fixup device configuration\n");
+
+ mem = pcim_iomap(pdev, 0, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "ioremap error\n");
+ return -EINVAL;
+ }
+
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &bar0);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0,
+ pci_resource_start(pdev, 0));
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ /* set pointer to first reg address */
+ for (data = (const void *)(cal_data + 3);
+ (const void *)data <= cal_end && data->reg != (u16)~0;
+ data++) {
+ u32 val;
+ u16 reg;
+
+ reg = data->reg;
+ val = data->low_val;
+ val |= ((u32)data->high_val) << 16;
+
+ if (swap_needed) {
+ reg = swab16(reg);
+ val = swahb32(val);
+ }
+
+ __raw_writel(val, mem + reg);
+ usleep_range(100, 120);
+ }
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, bar0);
+ pcim_iounmap(pdev, mem);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+static void owl_fw_cb(const struct firmware *fw, void *context)
+{
+ struct pci_dev *pdev = (struct pci_dev *)context;
+ struct owl_ctx *ctx = (struct owl_ctx *)pci_get_drvdata(pdev);
+ struct pci_bus *bus;
+
+ complete(&ctx->eeprom_load);
+
+ if (!fw) {
+ dev_err(&pdev->dev, "no eeprom data received.\n");
+ goto release;
+ }
+
+ /* also note that we are doing *u16 operations on the file */
+ if (fw->size > 4096 || fw->size < 0x200 || (fw->size & 1) == 1) {
+ dev_err(&pdev->dev, "eeprom file has an invalid size.\n");
+ goto release;
+ }
+
+ if (ath9k_pci_fixup(pdev, (const u16 *)fw->data, fw->size))
+ goto release;
+
+ pci_lock_rescan_remove();
+ bus = pdev->bus;
+ pci_stop_and_remove_bus_device(pdev);
+ /* the device should come back with the proper
+ * ProductId. But we have to initiate a rescan.
+ */
+ pci_rescan_bus(bus);
+ pci_unlock_rescan_remove();
+
+release:
+ release_firmware(fw);
+}
+
+static const char *owl_get_eeprom_name(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ char *eeprom_name;
+
+ dev_dbg(dev, "using auto-generated eeprom filename\n");
+
+ eeprom_name = devm_kzalloc(dev, EEPROM_FILENAME_LEN, GFP_KERNEL);
+ if (!eeprom_name)
+ return NULL;
+
+ /* this should match the pattern used in ath9k/init.c */
+ scnprintf(eeprom_name, EEPROM_FILENAME_LEN, "ath9k-eeprom-pci-%s.bin",
+ dev_name(dev));
+
+ return eeprom_name;
+}
+
+static int owl_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct owl_ctx *ctx;
+ const char *eeprom_name;
+ int err = 0;
+
+ if (pcim_enable_device(pdev))
+ return -EIO;
+
+ pcim_pin_device(pdev);
+
+ eeprom_name = owl_get_eeprom_name(pdev);
+ if (!eeprom_name) {
+ dev_err(&pdev->dev, "no eeprom filename found.\n");
+ return -ENODEV;
+ }
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_completion(&ctx->eeprom_load);
+
+ pci_set_drvdata(pdev, ctx);
+ err = request_firmware_nowait(THIS_MODULE, true, eeprom_name,
+ &pdev->dev, GFP_KERNEL, pdev, owl_fw_cb);
+ if (err)
+ dev_err(&pdev->dev, "failed to request caldata (%d).\n", err);
+
+ return err;
+}
+
+static void owl_remove(struct pci_dev *pdev)
+{
+ struct owl_ctx *ctx = pci_get_drvdata(pdev);
+
+ if (ctx) {
+ wait_for_completion(&ctx->eeprom_load);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static const struct pci_device_id owl_pci_table[] = {
+ { PCI_VDEVICE(ATHEROS, 0xff1c) }, /* PCIe */
+ { PCI_VDEVICE(ATHEROS, 0xff1d) }, /* PCI */
+ { },
+};
+MODULE_DEVICE_TABLE(pci, owl_pci_table);
+
+static struct pci_driver owl_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = owl_pci_table,
+ .probe = owl_probe,
+ .remove = owl_remove,
+};
+module_pci_driver(owl_driver);
+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
+MODULE_DESCRIPTION("External EEPROM data loader for Atheros AR500X to AR92XX");
+MODULE_LICENSE("Dual BSD/GPL");