diff options
Diffstat (limited to 'drivers/net/wireless/ath5k/reg.h')
| -rw-r--r-- | drivers/net/wireless/ath5k/reg.h | 143 |
1 files changed, 70 insertions, 73 deletions
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 9189ab13286c..7070d1543cdc 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -187,6 +187,7 @@ #define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ #define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ #define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ +#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ #define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ /* @@ -753,7 +754,7 @@ */ #define AR5K_DCU_SEQNUM_BASE 0x1140 #define AR5K_DCU_SEQNUM_M 0x00000fff -#define AR5K_QUEUE_DFS_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) +#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) /* * DCU global IFS SIFS register @@ -811,6 +812,8 @@ /* * DCU transmit filter table 0 (32 entries) + * each entry contains a 32bit slice of the + * 128bit tx filter for each DCU (4 slices per DCU) */ #define AR5K_DCU_TX_FILTER_0_BASE 0x1038 #define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) @@ -819,7 +822,7 @@ * DCU transmit filter table 1 (16 entries) */ #define AR5K_DCU_TX_FILTER_1_BASE 0x103c -#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64)) +#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) /* * DCU clear transmit filter register @@ -1447,7 +1450,7 @@ AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) /* - * Last beacon timestamp register + * Last beacon timestamp register (Read Only) */ #define AR5K_LAST_TSTP 0x8080 @@ -1465,7 +1468,7 @@ #define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ #define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ #define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ -#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* Test ARM (Adaptive Radio Mode ?) */ +#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ /* * Default antenna register [5211+] @@ -1551,6 +1554,19 @@ /*===5212 Specific PCU registers===*/ /* + * Transmit power control register + */ +#define AR5K_TPC 0x80e8 +#define AR5K_TPC_ACK 0x0000003f /* ack frames */ +#define AR5K_TPC_ACK_S 0 +#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ +#define AR5K_TPC_CTS_S 8 +#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ +#define AR5K_TPC_CHIRP_S 16 +#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ +#define AR5K_TPC_DOPPLER_S 24 + +/* * XR (eXtended Range) mode register */ #define AR5K_XRMODE 0x80c0 /* Register Address */ @@ -1677,7 +1693,7 @@ * TSF parameter register */ #define AR5K_TSF_PARM 0x8104 /* Register Address */ -#define AR5K_TSF_PARM_INC_M 0x000000ff /* Mask for TSF increment */ +#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ #define AR5K_TSF_PARM_INC_S 0 /* @@ -1689,7 +1705,7 @@ #define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ #define AR5K_QOS_NOACK_BIT_OFFSET_S 4 #define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ -#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8 +#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 /* * PHY error filter register @@ -1848,15 +1864,14 @@ * TST_2 (Misc config parameters) */ #define AR5K_PHY_TST2 0x9800 /* Register Address */ -#define AR5K_PHY_TST2_TRIG_SEL 0x00000001 /* Trigger select (?) (field ?) */ -#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) (field ?) */ -#define AR5K_PHY_TST2_CBUS_MODE 0x00000100 /* Cardbus mode (?) */ -/* bit reserved */ +#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ +#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ +#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ #define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ -#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch) */ +#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ #define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ #define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ #define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ @@ -1926,8 +1941,8 @@ #define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 #define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0 +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 #define AR5K_PHY_ADC_CTL 0x982c #define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 @@ -1961,7 +1976,7 @@ #define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ #define AR5K_PHY_SETTLING_AGC_S 0 #define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */ -#define AR5K_PHY_SETTLINK_SWITCH_S 7 +#define AR5K_PHY_SETTLING_SWITCH_S 7 /* * PHY Gain registers @@ -2067,14 +2082,14 @@ * PHY sleep registers [5112+] */ #define AR5K_PHY_SCR 0x9870 -#define AR5K_PHY_SCR_32MHZ 0x0000001f #define AR5K_PHY_SLMT 0x9874 #define AR5K_PHY_SLMT_32MHZ 0x0000007f #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e - +#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a +#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 /* * PHY PLL (Phase Locked Loop) control register @@ -2101,34 +2116,10 @@ /* * RF Buffer register * - * There are some special control registers on the RF chip - * that hold various operation settings related mostly to - * the analog parts (channel, gain adjustment etc). - * - * We don't write on those registers directly but - * we send a data packet on the buffer register and - * then write on another special register to notify hw - * to apply the settings. This is done so that control registers - * can be dynamicaly programmed during operation and the settings - * are applied faster on the hw. - * - * We sent such data packets during rf initialization and channel change - * through ath5k_hw_rf*_rfregs and ath5k_hw_rf*_channel functions. - * - * The data packets we send during initializadion are inside ath5k_ini_rf - * struct (see ath5k_hw.h) and each one is related to an "rf register bank". - * We use *rfregs functions to modify them acording to current operation - * mode and eeprom values and pass them all together to the chip. - * * It's obvious from the code that 0x989c is the buffer register but * for the other special registers that we write to after sending each * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers * for now. It's interesting that they are also used for some other operations. - * - * Also check out hw.h and U.S. Patent 6677779 B1 (about buffer - * registers and control registers): - * - * http://www.google.com/patents?id=qNURAAAAEBAJ */ #define AR5K_RF_BUFFER 0x989c @@ -2178,7 +2169,8 @@ #define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ #define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ #define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ -#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x00000010 /* Switch table idle (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 /* * PHY receiver delay register [5111+] @@ -2218,7 +2210,7 @@ #define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ -#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0 +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ @@ -2243,9 +2235,7 @@ #define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ /* - * PHY PAPD probe register [5111+ (?)] - * Is this only present in 5212 ? - * Because it's always 0 in 5211 initialization code + * PHY PAPD probe register [5111+] */ #define AR5K_PHY_PAPD_PROBE 0x9930 #define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 @@ -2303,6 +2293,15 @@ AR5K_PHY_FRAME_CTL_TIMING_ERR /* + * PHY Tx Power adjustment register [5212A+] + */ +#define AR5K_PHY_TX_PWR_ADJ 0x994c +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 + +/* * PHY radar detection register [5111+] */ #define AR5K_PHY_RADAR 0x9954 @@ -2355,7 +2354,7 @@ #define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 #define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 #define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 -#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 /* @@ -2387,21 +2386,21 @@ #define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff #define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 -#define AR_PHY_TIMING_9 0x9998 -#define AR_PHY_TIMING_10 0x999c -#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff -#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0 +#define AR5K_PHY_TIMING_9 0x9998 +#define AR5K_PHY_TIMING_10 0x999c +#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 /* * Spur mitigation control */ -#define AR_PHY_TIMING_11 0x99a0 /* Register address */ -#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ -#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 -#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ -#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20 -#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ -#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ +#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ /* * Gain tables @@ -2483,17 +2482,7 @@ #define AR5K_PHY_SDELAY 0x99f4 #define AR5K_PHY_SDELAY_32MHZ 0x000000ff #define AR5K_PHY_SPENDING 0x99f8 -#define AR5K_PHY_SPENDING_14 0x00000014 -#define AR5K_PHY_SPENDING_18 0x00000018 -#define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 -/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ -/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ -#define AR5K_PHY_SPENDING_RF5413 0x00000018 -#define AR5K_PHY_SPENDING_RF2413 0x00000018 -#define AR5K_PHY_SPENDING_RF2316 0x00000018 -#define AR5K_PHY_SPENDING_RF2317 0x00000018 -#define AR5K_PHY_SPENDING_RF2425 0x00000014 + /* * PHY PAPD I (power?) table (?) @@ -2505,11 +2494,7 @@ /* * PHY PCDAC TX power table */ -#define AR5K_PHY_PCDAC_TXPOWER_BASE_5211 0xa180 -#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413 0xa280 -#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF2413 ? \ - AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\ - AR5K_PHY_PCDAC_TXPOWER_BASE_5211) +#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 #define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) /* @@ -2578,6 +2563,12 @@ #define AR5K_PHY_TPC_RG1 0xa258 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 +#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 +#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 +#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 +#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 +#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 +#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 #define AR5K_PHY_TPC_RG5 0xa26C #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F @@ -2590,3 +2581,9 @@ #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 + +/* + * PHY PDADC Tx power table + */ +#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 +#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) |