summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
-rw-r--r--drivers/net/wireless/b43/main.c38
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d4a356b11636..df7a1e7f4a52 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1244,13 +1244,13 @@ generate_new:
static void handle_irq_tbtt_indication(struct b43_wldev *dev)
{
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
///TODO: PS TBTT
} else {
if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
b43_power_saving_ctl_bits(dev, 0);
}
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
dev->dfq_valid = 1;
}
@@ -1599,8 +1599,8 @@ static void handle_irq_beacon(struct b43_wldev *dev)
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
- if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) &&
- !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
+ !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
return;
/* This is the bottom half of the asynchronous beacon update. */
@@ -2568,10 +2568,10 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
ctl &= ~B43_MACCTL_BEACPROMISC;
ctl |= B43_MACCTL_INFRA;
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
ctl |= B43_MACCTL_AP;
- else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
+ else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
ctl &= ~B43_MACCTL_INFRA;
if (wl->filter_flags & FIF_CONTROL)
@@ -3406,8 +3406,8 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
phy->ops->set_rx_antenna(dev, antenna);
/* Update templates for AP/mesh mode. */
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
@@ -3595,14 +3595,14 @@ static int b43_op_config_interface(struct ieee80211_hw *hw,
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
- b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) {
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
B43_WARN_ON(vif->type != wl->if_type);
if (conf->changed & IEEE80211_IFCC_SSID)
b43_set_ssid(dev, conf->ssid, conf->ssid_len);
if (conf->changed & IEEE80211_IFCC_BEACON)
b43_update_templates(wl);
- } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) {
+ } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
if (conf->changed & IEEE80211_IFCC_BEACON)
b43_update_templates(wl);
}
@@ -3903,7 +3903,7 @@ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
pu_delay = 3700;
else
pu_delay = 1050;
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
pu_delay = 500;
if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
pu_delay = max(pu_delay, (u16)2400);
@@ -3917,7 +3917,7 @@ static void b43_set_pretbtt(struct b43_wldev *dev)
u16 pretbtt;
/* The time value is in microseconds. */
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
pretbtt = 2;
} else {
if (dev->phy.type == B43_PHYTYPE_A)
@@ -4084,11 +4084,11 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != IEEE80211_IF_TYPE_AP &&
- conf->type != IEEE80211_IF_TYPE_MESH_POINT &&
- conf->type != IEEE80211_IF_TYPE_STA &&
- conf->type != IEEE80211_IF_TYPE_WDS &&
- conf->type != IEEE80211_IF_TYPE_IBSS)
+ if (conf->type != NL80211_IFTYPE_AP &&
+ conf->type != NL80211_IFTYPE_MESH_POINT &&
+ conf->type != NL80211_IFTYPE_STATION &&
+ conf->type != NL80211_IFTYPE_WDS &&
+ conf->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);