diff options
Diffstat (limited to 'drivers/net/wireless/b43/xmit.c')
-rw-r--r-- | drivers/net/wireless/b43/xmit.c | 206 |
1 files changed, 106 insertions, 100 deletions
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 7caa26eb4105..19aefbfb2c93 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -30,48 +30,51 @@ #include "xmit.h" #include "phy.h" #include "dma.h" +#include "pio.h" -/* Extract the bitrate out of a CCK PLCP header. */ -static u8 b43_plcp_get_bitrate_cck(struct b43_plcp_hdr6 *plcp) +/* Extract the bitrate index out of a CCK PLCP header. */ +static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp) { switch (plcp->raw[0]) { case 0x0A: - return B43_CCK_RATE_1MB; + return 0; case 0x14: - return B43_CCK_RATE_2MB; + return 1; case 0x37: - return B43_CCK_RATE_5MB; + return 2; case 0x6E: - return B43_CCK_RATE_11MB; + return 3; } B43_WARN_ON(1); - return 0; + return -1; } -/* Extract the bitrate out of an OFDM PLCP header. */ -static u8 b43_plcp_get_bitrate_ofdm(struct b43_plcp_hdr6 *plcp) +/* Extract the bitrate index out of an OFDM PLCP header. */ +static u8 b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy) { + int base = aphy ? 0 : 4; + switch (plcp->raw[0] & 0xF) { case 0xB: - return B43_OFDM_RATE_6MB; + return base + 0; case 0xF: - return B43_OFDM_RATE_9MB; + return base + 1; case 0xA: - return B43_OFDM_RATE_12MB; + return base + 2; case 0xE: - return B43_OFDM_RATE_18MB; + return base + 3; case 0x9: - return B43_OFDM_RATE_24MB; + return base + 4; case 0xD: - return B43_OFDM_RATE_36MB; + return base + 5; case 0x8: - return B43_OFDM_RATE_48MB; + return base + 6; case 0xC: - return B43_OFDM_RATE_54MB; + return base + 7; } B43_WARN_ON(1); - return 0; + return -1; } u8 b43_plcp_get_ratecode_cck(const u8 bitrate) @@ -191,6 +194,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, (const struct ieee80211_hdr *)fragment_data; int use_encryption = (!(txctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)); u16 fctl = le16_to_cpu(wlhdr->frame_control); + struct ieee80211_rate *fbrate; u8 rate, rate_fb; int rate_ofdm, rate_fb_ofdm; unsigned int plcp_fragment_len; @@ -200,9 +204,11 @@ int b43_generate_txhdr(struct b43_wldev *dev, memset(txhdr, 0, sizeof(*txhdr)); - rate = txctl->tx_rate; + WARN_ON(!txctl->tx_rate); + rate = txctl->tx_rate ? txctl->tx_rate->hw_value : B43_CCK_RATE_1MB; rate_ofdm = b43_is_ofdm_rate(rate); - rate_fb = (txctl->alt_retry_rate == -1) ? rate : txctl->alt_retry_rate; + fbrate = txctl->alt_retry_rate ? : txctl->tx_rate; + rate_fb = fbrate->hw_value; rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); if (rate_ofdm) @@ -221,11 +227,10 @@ int b43_generate_txhdr(struct b43_wldev *dev, * use the original dur_id field. */ txhdr->dur_fb = wlhdr->duration_id; } else { - int fbrate_base100kbps = B43_RATE_TO_BASE100KBPS(rate_fb); txhdr->dur_fb = ieee80211_generic_frame_duration(dev->wl->hw, txctl->vif, fragment_len, - fbrate_base100kbps); + fbrate); } plcp_fragment_len = fragment_len + FCS_LEN; @@ -287,7 +292,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, phy_ctl |= B43_TXH_PHY_ENC_OFDM; else phy_ctl |= B43_TXH_PHY_ENC_CCK; - if (dev->short_preamble) + if (txctl->flags & IEEE80211_TXCTL_SHORT_PREAMBLE) phy_ctl |= B43_TXH_PHY_SHORTPRMBL; switch (b43_ieee80211_antenna_sanitize(dev, txctl->antenna_sel_tx)) { @@ -332,7 +337,8 @@ int b43_generate_txhdr(struct b43_wldev *dev, int rts_rate_ofdm, rts_rate_fb_ofdm; struct b43_plcp_hdr6 *plcp; - rts_rate = txctl->rts_cts_rate; + WARN_ON(!txctl->rts_cts_rate); + rts_rate = txctl->rts_cts_rate ? txctl->rts_cts_rate->hw_value : B43_CCK_RATE_1MB; rts_rate_ofdm = b43_is_ofdm_rate(rts_rate); rts_rate_fb = b43_calc_fallback_rate(rts_rate); rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb); @@ -506,7 +512,7 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) u16 phystat0, phystat3, chanstat, mactime; u32 macstat; u16 chanid; - u8 jssi; + u16 phytype; int padding; memset(&status, 0, sizeof(status)); @@ -514,10 +520,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) /* Get metadata about the frame from the header. */ phystat0 = le16_to_cpu(rxhdr->phy_status0); phystat3 = le16_to_cpu(rxhdr->phy_status3); - jssi = rxhdr->jssi; macstat = le32_to_cpu(rxhdr->mac_status); mactime = le16_to_cpu(rxhdr->mac_time); chanstat = le16_to_cpu(rxhdr->channel); + phytype = chanstat & B43_RX_CHAN_PHYTYPE; if (macstat & B43_RX_MAC_FCSERR) dev->wl->ieee_stats.dot11FCSErrorCount++; @@ -567,26 +573,40 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) } } - status.ssi = b43_rssi_postprocess(dev, jssi, - (phystat0 & B43_RX_PHYST0_OFDM), - (phystat0 & B43_RX_PHYST0_GAINCTL), - (phystat3 & B43_RX_PHYST3_TRSTATE)); + /* Link quality statistics */ status.noise = dev->stats.link_noise; - /* the next line looks wrong, but is what mac80211 wants */ - status.signal = (jssi * 100) / B43_RX_MAX_SSI; + if ((chanstat & B43_RX_CHAN_PHYTYPE) == B43_PHYTYPE_N) { +// s8 rssi = max(rxhdr->power0, rxhdr->power1); + //TODO: Find out what the rssi value is (dBm or percentage?) + // and also find out what the maximum possible value is. + // Fill status.ssi and status.signal fields. + } else { + status.ssi = b43_rssi_postprocess(dev, rxhdr->jssi, + (phystat0 & B43_RX_PHYST0_OFDM), + (phystat0 & B43_RX_PHYST0_GAINCTL), + (phystat3 & B43_RX_PHYST3_TRSTATE)); + /* the next line looks wrong, but is what mac80211 wants */ + status.signal = (rxhdr->jssi * 100) / B43_RX_MAX_SSI; + } + if (phystat0 & B43_RX_PHYST0_OFDM) - status.rate = b43_plcp_get_bitrate_ofdm(plcp); + status.rate_idx = b43_plcp_get_bitrate_idx_ofdm(plcp, + phytype == B43_PHYTYPE_A); else - status.rate = b43_plcp_get_bitrate_cck(plcp); + status.rate_idx = b43_plcp_get_bitrate_idx_cck(plcp); status.antenna = !!(phystat0 & B43_RX_PHYST0_ANT); /* - * If monitors are present get full 64-bit timestamp. This - * code assumes we get to process the packet within 16 bits - * of timestamp, i.e. about 65 milliseconds after the PHY - * received the first symbol. + * All frames on monitor interfaces and beacons always need a full + * 64-bit timestamp. Monitor interfaces need it for diagnostic + * purposes and beacons for IBSS merging. + * This code assumes we get to process the packet within 16 bits + * of timestamp, i.e. about 65 milliseconds after the PHY received + * the first symbol. */ - if (dev->wl->radiotap_enabled) { + if (((fctl & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) + == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON)) || + dev->wl->radiotap_enabled) { u16 low_mactime_now; b43_tsf_read(dev, &status.mactime); @@ -601,29 +621,28 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) chanid = (chanstat & B43_RX_CHAN_ID) >> B43_RX_CHAN_ID_SHIFT; switch (chanstat & B43_RX_CHAN_PHYTYPE) { case B43_PHYTYPE_A: - status.phymode = MODE_IEEE80211A; + status.band = IEEE80211_BAND_5GHZ; B43_WARN_ON(1); /* FIXME: We don't really know which value the "chanid" contains. * So the following assignment might be wrong. */ - status.channel = chanid; - status.freq = b43_channel_to_freq_5ghz(status.channel); + status.freq = b43_channel_to_freq_5ghz(chanid); break; case B43_PHYTYPE_G: - status.phymode = MODE_IEEE80211G; + status.band = IEEE80211_BAND_2GHZ; /* chanid is the radio channel cookie value as used * to tune the radio. */ status.freq = chanid + 2400; - status.channel = b43_freq_to_channel_2ghz(status.freq); break; case B43_PHYTYPE_N: - status.phymode = 0xDEAD /*FIXME MODE_IEEE80211N*/; /* chanid is the SHM channel cookie. Which is the plain * channel number in b43. */ - status.channel = chanid; - if (chanstat & B43_RX_CHAN_5GHZ) - status.freq = b43_freq_to_channel_5ghz(status.freq); - else - status.freq = b43_freq_to_channel_2ghz(status.freq); + if (chanstat & B43_RX_CHAN_5GHZ) { + status.band = IEEE80211_BAND_5GHZ; + status.freq = b43_freq_to_channel_5ghz(chanid); + } else { + status.band = IEEE80211_BAND_2GHZ; + status.freq = b43_freq_to_channel_2ghz(chanid); + } break; default: B43_WARN_ON(1); @@ -657,67 +676,54 @@ void b43_handle_txstatus(struct b43_wldev *dev, dev->wl->ieee_stats.dot11RTSSuccessCount++; } - b43_dma_handle_txstatus(dev, status); + if (b43_using_pio_transfers(dev)) + b43_pio_handle_txstatus(dev, status); + else + b43_dma_handle_txstatus(dev, status); } -/* Handle TX status report as received through DMA/PIO queues */ -void b43_handle_hwtxstatus(struct b43_wldev *dev, - const struct b43_hwtxstatus *hw) +/* Fill out the mac80211 TXstatus report based on the b43-specific + * txstatus report data. This returns a boolean whether the frame was + * successfully transmitted. */ +bool b43_fill_txstatus_report(struct ieee80211_tx_status *report, + const struct b43_txstatus *status) { - struct b43_txstatus status; - u8 tmp; - - status.cookie = le16_to_cpu(hw->cookie); - status.seq = le16_to_cpu(hw->seq); - status.phy_stat = hw->phy_stat; - tmp = hw->count; - status.frame_count = (tmp >> 4); - status.rts_count = (tmp & 0x0F); - tmp = hw->flags; - status.supp_reason = ((tmp & 0x1C) >> 2); - status.pm_indicated = !!(tmp & 0x80); - status.intermediate = !!(tmp & 0x40); - status.for_ampdu = !!(tmp & 0x20); - status.acked = !!(tmp & 0x02); - - b43_handle_txstatus(dev, &status); + bool frame_success = 1; + + if (status->acked) { + /* The frame was ACKed. */ + report->flags |= IEEE80211_TX_STATUS_ACK; + } else { + /* The frame was not ACKed... */ + if (!(report->control.flags & IEEE80211_TXCTL_NO_ACK)) { + /* ...but we expected an ACK. */ + frame_success = 0; + report->excessive_retries = 1; + } + } + if (status->frame_count == 0) { + /* The frame was not transmitted at all. */ + report->retry_count = 0; + } else + report->retry_count = status->frame_count - 1; + + return frame_success; } /* Stop any TX operation on the device (suspend the hardware queues) */ void b43_tx_suspend(struct b43_wldev *dev) { - b43_dma_tx_suspend(dev); + if (b43_using_pio_transfers(dev)) + b43_pio_tx_suspend(dev); + else + b43_dma_tx_suspend(dev); } /* Resume any TX operation on the device (resume the hardware queues) */ void b43_tx_resume(struct b43_wldev *dev) { - b43_dma_tx_resume(dev); -} - -#if 0 -static void upload_qos_parms(struct b43_wldev *dev, - const u16 * parms, u16 offset) -{ - int i; - - for (i = 0; i < B43_NR_QOSPARMS; i++) { - b43_shm_write16(dev, B43_SHM_SHARED, - offset + (i * 2), parms[i]); - } -} -#endif - -/* Initialize the QoS parameters */ -void b43_qos_init(struct b43_wldev *dev) -{ - /* FIXME: This function must probably be called from the mac80211 - * config callback. */ - return; - - b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); - //FIXME kill magic - b43_write16(dev, 0x688, b43_read16(dev, 0x688) | 0x4); - - /*TODO: We might need some stack support here to get the values. */ + if (b43_using_pio_transfers(dev)) + b43_pio_tx_resume(dev); + else + b43_dma_tx_resume(dev); } |