diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index ecabb04f33c3..af17a5bc8b83 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -29,6 +29,24 @@ #define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 #define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 +#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ +#define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002 + +#define BRCMF_STA_ASSOC 0x10 /* Associated */ + +/* size of brcmf_scan_params not including variable length array */ +#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 + +/* masks for channel and ssid count */ +#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff +#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 + +/* primary (ie tx) key */ +#define BRCMF_PRIMARY_KEY (1 << 1) +#define DOT11_BSSTYPE_ANY 2 +#define BRCMF_ESCAN_REQ_VERSION 1 + +#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, @@ -90,4 +108,290 @@ enum brcmf_tdls_manual_ep_ops { BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6 }; +/* Pattern matching filter. Specifies an offset within received packets to + * start matching, the pattern to match, the size of the pattern, and a bitmask + * that indicates which bits within the pattern should be matched. + */ +struct brcmf_pkt_filter_pattern_le { + /* + * Offset within received packet to start pattern matching. + * Offset '0' is the first byte of the ethernet header. + */ + __le32 offset; + /* Size of the pattern. Bitmask must be the same size.*/ + __le32 size_bytes; + /* + * Variable length mask and pattern data. mask starts at offset 0. + * Pattern immediately follows mask. + */ + u8 mask_and_pattern[1]; +}; + +/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ +struct brcmf_pkt_filter_le { + __le32 id; /* Unique filter id, specified by app. */ + __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ + __le32 negate_match; /* Negate the result of filter matches */ + union { /* Filter definitions */ + struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ + } u; +}; + +/* IOVAR "pkt_filter_enable" parameter. */ +struct brcmf_pkt_filter_enable_le { + __le32 id; /* Unique filter id */ + __le32 enable; /* Enable/disable bool */ +}; + +/* BSS info structure + * Applications MUST CHECK ie_offset field and length field to access IEs and + * next bss_info structure in a vector (in struct brcmf_scan_results) + */ +struct brcmf_bss_info_le { + __le32 version; /* version field */ + __le32 length; /* byte length of data in this record, + * starting at version and including IEs + */ + u8 BSSID[ETH_ALEN]; + __le16 beacon_period; /* units are Kusec */ + __le16 capability; /* Capability information */ + u8 SSID_len; + u8 SSID[32]; + struct { + __le32 count; /* # rates in this set */ + u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + __le16 chanspec; /* chanspec for bss */ + __le16 atim_window; /* units are Kusec */ + u8 dtim_period; /* DTIM period */ + __le16 RSSI; /* receive signal strength (in dBm) */ + s8 phy_noise; /* noise (in dBm) */ + + u8 n_cap; /* BSS is 802.11N Capable */ + /* 802.11N BSS Capabilities (based on HT_CAP_*): */ + __le32 nbss_cap; + u8 ctl_ch; /* 802.11N BSS control channel number */ + __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ + u8 flags; /* flags */ + u8 reserved[3]; /* Reserved for expansion of BSS properties */ + u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ + + __le16 ie_offset; /* offset at which IEs start, from beginning */ + __le32 ie_length; /* byte length of Information Elements */ + __le16 SNR; /* average SNR of during frame reception */ + /* Add new fields here */ + /* variable length Information Elements */ +}; + +struct brcm_rateset_le { + /* # rates in this set */ + __le32 count; + /* rates in 500kbps units w/hi bit set if basic */ + u8 rates[BRCMF_MAXRATES_IN_SET]; +}; + +struct brcmf_ssid { + u32 SSID_len; + unsigned char SSID[32]; +}; + +struct brcmf_ssid_le { + __le32 SSID_len; + unsigned char SSID[32]; +}; + +struct brcmf_scan_params_le { + struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ + u8 bssid[ETH_ALEN]; /* default: bcast */ + s8 bss_type; /* default: any, + * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT + */ + u8 scan_type; /* flags, 0 use default */ + __le32 nprobes; /* -1 use default, number of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the + * home channel between channel scans + */ + __le32 channel_num; /* count of channels and ssids that follow + * + * low half is count of channels in + * channel_list, 0 means default (use all + * available channels) + * + * high half is entries in struct brcmf_ssid + * array that follows channel_list, aligned for + * s32 (4 bytes) meaning an odd channel count + * implies a 2-byte pad between end of + * channel_list and first ssid + * + * if ssid count is zero, single ssid in the + * fixed parameter portion is assumed, otherwise + * ssid in the fixed portion is ignored + */ + __le16 channel_list[1]; /* list of chanspecs */ +}; + +struct brcmf_scan_results { + u32 buflen; + u32 version; + u32 count; + struct brcmf_bss_info_le bss_info_le[]; +}; + +struct brcmf_escan_params_le { + __le32 version; + __le16 action; + __le16 sync_id; + struct brcmf_scan_params_le params_le; +}; + +struct brcmf_escan_result_le { + __le32 buflen; + __le32 version; + __le16 sync_id; + __le16 bss_count; + struct brcmf_bss_info_le bss_info_le; +}; + +#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ + sizeof(struct brcmf_bss_info_le)) + +/* used for association with a specific BSSID and chanspec list */ +struct brcmf_assoc_params_le { + /* 00:00:00:00:00:00: broadcast scan */ + u8 bssid[ETH_ALEN]; + /* 0: all available channels, otherwise count of chanspecs in + * chanspec_list */ + __le32 chanspec_num; + /* list of chanspecs */ + __le16 chanspec_list[1]; +}; + +/* used for join with or without a specific bssid and channel list */ +struct brcmf_join_params { + struct brcmf_ssid_le ssid_le; + struct brcmf_assoc_params_le params_le; +}; + +/* scan params for extended join */ +struct brcmf_join_scan_params_le { + u8 scan_type; /* 0 use default, active or passive scan */ + __le32 nprobes; /* -1 use default, nr of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the home + * channel between channel scans + */ +}; + +/* extended join params */ +struct brcmf_ext_join_params_le { + struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ + struct brcmf_join_scan_params_le scan_le; + struct brcmf_assoc_params_le assoc_le; +}; + +struct brcmf_wsec_key { + u32 index; /* key index */ + u32 len; /* key length */ + u8 data[WLAN_MAX_KEY_LEN]; /* key data */ + u32 pad_1[18]; + u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + u32 flags; /* misc flags */ + u32 pad_2[3]; + u32 iv_initialized; /* has IV been initialized already? */ + u32 pad_3; + /* Rx IV */ + struct { + u32 hi; /* upper 32 bits of IV */ + u16 lo; /* lower 16 bits of IV */ + } rxiv; + u32 pad_4[2]; + u8 ea[ETH_ALEN]; /* per station */ +}; + +/* + * dongle requires same struct as above but with fields in little endian order + */ +struct brcmf_wsec_key_le { + __le32 index; /* key index */ + __le32 len; /* key length */ + u8 data[WLAN_MAX_KEY_LEN]; /* key data */ + __le32 pad_1[18]; + __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + __le32 flags; /* misc flags */ + __le32 pad_2[3]; + __le32 iv_initialized; /* has IV been initialized already? */ + __le32 pad_3; + /* Rx IV */ + struct { + __le32 hi; /* upper 32 bits of IV */ + __le16 lo; /* lower 16 bits of IV */ + } rxiv; + __le32 pad_4[2]; + u8 ea[ETH_ALEN]; /* per station */ +}; + +/* Used to get specific STA parameters */ +struct brcmf_scb_val_le { + __le32 val; + u8 ea[ETH_ALEN]; +}; + +/* channel encoding */ +struct brcmf_channel_info_le { + __le32 hw_channel; + __le32 target_channel; + __le32 scan_channel; +}; + +struct brcmf_sta_info_le { + __le16 ver; /* version of this struct */ + __le16 len; /* length in bytes of this structure */ + __le16 cap; /* sta's advertised capabilities */ + __le32 flags; /* flags defined below */ + __le32 idle; /* time since data pkt rx'd from sta */ + u8 ea[ETH_ALEN]; /* Station address */ + __le32 count; /* # rates in this set */ + u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ + /* w/hi bit set if basic */ + __le32 in; /* seconds elapsed since associated */ + __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ + __le32 tx_pkts; /* # of packets transmitted */ + __le32 tx_failures; /* # of packets failed */ + __le32 rx_ucast_pkts; /* # of unicast packets received */ + __le32 rx_mcast_pkts; /* # of multicast packets received */ + __le32 tx_rate; /* Rate of last successful tx frame */ + __le32 rx_rate; /* Rate of last successful rx frame */ + __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ + __le32 rx_decrypt_failures; /* # of packet decrypted failed */ +}; + +struct brcmf_chanspec_list { + __le32 count; /* # of entries */ + __le32 element[1]; /* variable length uint32 list */ +}; + +/* + * WLC_E_PROBRESP_MSG + * WLC_E_P2P_PROBREQ_MSG + * WLC_E_ACTION_FRAME_RX + */ +struct brcmf_rx_mgmt_data { + __be16 version; + __be16 chanspec; + __be32 rssi; + __be32 mactime; + __be32 rate; +}; + #endif /* FWIL_TYPES_H_ */ |