diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211')
24 files changed, 668 insertions, 3946 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 4add7da24681..e2480d196276 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -85,18 +85,15 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) sdiodev->irq_wake = true; /* must configure SDIO_CCCR_IENx to enable irq */ - data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IENx, &ret); + data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, - data, &ret); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); /* redirect, configure ane enable io for interrupt signal */ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH) data |= SDIO_SEPINT_ACT_HI; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT, - data, &ret); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); return 0; } @@ -105,9 +102,8 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) { brcmf_dbg(TRACE, "Entering\n"); - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT, - 0, NULL); - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); if (sdiodev->irq_wake) { disable_irq_wake(sdiodev->irq); @@ -158,153 +154,147 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) } #endif /* CONFIG_BRCMFMAC_SDIO_OOB */ -u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, - int *err) -{ - int status; - s32 retry = 0; - u8 data = 0; - - do { - if (retry) /* wait for 1 ms till bus get settled down */ - udelay(1000); - status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num, - addr, (u8 *) &data); - } while (status != 0 - && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT)); - if (err) - *err = status; - - brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n", - fnc_num, addr, data); - - return data; -} - -void -brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, - u8 data, int *err) -{ - int status; - s32 retry = 0; - - do { - if (retry) /* wait for 1 ms till bus get settled down */ - udelay(1000); - status = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, fnc_num, - addr, (u8 *) &data); - } while (status != 0 - && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT)); - if (err) - *err = status; - - brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n", - fnc_num, addr, data); -} - int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) { - int err = 0; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW, - (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err); - if (!err) - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SBADDRMID, - (address >> 16) & SBSDIO_SBADDRMID_MASK, - &err); - if (!err) - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SBADDRHIGH, - (address >> 24) & SBSDIO_SBADDRHIGH_MASK, - &err); + int err = 0, i; + u8 addr[3]; + s32 retry; + + addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK; + addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK; + addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK; + + for (i = 0; i < 3; i++) { + retry = 0; + do { + if (retry) + usleep_range(1000, 2000); + err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, + SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i, + &addr[i]); + } while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); + + if (err) { + brcmf_dbg(ERROR, "failed at addr:0x%0x\n", + SBSDIO_FUNC1_SBADDRLOW + i); + break; + } + } return err; } -u32 brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size) +static int +brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, + void *data, bool write) { - int status; - u32 word = 0; - uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK; - - brcmf_dbg(INFO, "fun = 1, addr = 0x%x\n", addr); - - if (bar0 != sdiodev->sbwad) { - if (brcmf_sdcard_set_sbaddr_window(sdiodev, bar0)) - return 0xFFFFFFFF; + u8 func_num, reg_size; + u32 bar; + s32 retry = 0; + int ret; - sdiodev->sbwad = bar0; + /* + * figure out how to read the register based on address range + * 0x00 ~ 0x7FF: function 0 CCCR and FBR + * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers + * The rest: function 1 silicon backplane core registers + */ + if ((addr & ~REG_F0_REG_MASK) == 0) { + func_num = SDIO_FUNC_0; + reg_size = 1; + } else if ((addr & ~REG_F1_MISC_MASK) == 0) { + func_num = SDIO_FUNC_1; + reg_size = 1; + } else { + func_num = SDIO_FUNC_1; + reg_size = 4; + + /* Set the window for SB core register */ + bar = addr & ~SBSDIO_SB_OFT_ADDR_MASK; + if (bar != sdiodev->sbwad) { + ret = brcmf_sdcard_set_sbaddr_window(sdiodev, bar); + if (ret != 0) { + memset(data, 0xFF, reg_size); + return ret; + } + sdiodev->sbwad = bar; + } + addr &= SBSDIO_SB_OFT_ADDR_MASK; + addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; } - addr &= SBSDIO_SB_OFT_ADDR_MASK; - if (size == 4) - addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + do { + if (!write) + memset(data, 0, reg_size); + if (retry) /* wait for 1 ms till bus get settled down */ + usleep_range(1000, 2000); + if (reg_size == 1) + ret = brcmf_sdioh_request_byte(sdiodev, write, + func_num, addr, data); + else + ret = brcmf_sdioh_request_word(sdiodev, write, + func_num, addr, data, 4); + } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - status = brcmf_sdioh_request_word(sdiodev, SDIOH_READ, SDIO_FUNC_1, - addr, &word, size); + if (ret != 0) + brcmf_dbg(ERROR, "failed with %d\n", ret); - sdiodev->regfail = (status != 0); + return ret; +} - brcmf_dbg(INFO, "u32data = 0x%x\n", word); +u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +{ + u8 data; + int retval; - /* if ok, return appropriately masked word */ - if (status == 0) { - switch (size) { - case sizeof(u8): - return word & 0xff; - case sizeof(u16): - return word & 0xffff; - case sizeof(u32): - return word; - default: - sdiodev->regfail = true; + brcmf_dbg(INFO, "addr:0x%08x\n", addr); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + brcmf_dbg(INFO, "data:0x%02x\n", data); - } - } + if (ret) + *ret = retval; - /* otherwise, bad sdio access or invalid size */ - brcmf_dbg(ERROR, "error reading addr 0x%04x size %d\n", addr, size); - return 0xFFFFFFFF; + return data; } -u32 brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size, - u32 data) +u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) { - int status; - uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK; - int err = 0; + u32 data; + int retval; - brcmf_dbg(INFO, "fun = 1, addr = 0x%x, uint%ddata = 0x%x\n", - addr, size * 8, data); + brcmf_dbg(INFO, "addr:0x%08x\n", addr); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + brcmf_dbg(INFO, "data:0x%08x\n", data); - if (bar0 != sdiodev->sbwad) { - err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0); - if (err) - return err; + if (ret) + *ret = retval; - sdiodev->sbwad = bar0; - } + return data; +} - addr &= SBSDIO_SB_OFT_ADDR_MASK; - if (size == 4) - addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; - status = - brcmf_sdioh_request_word(sdiodev, SDIOH_WRITE, SDIO_FUNC_1, - addr, &data, size); - sdiodev->regfail = (status != 0); +void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, + u8 data, int *ret) +{ + int retval; - if (status == 0) - return 0; + brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); - brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x size %d\n", - data, addr, size); - return 0xFFFFFFFF; + if (ret) + *ret = retval; } -bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev) +void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, + u32 data, int *ret) { - return sdiodev->regfail; + int retval; + + brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); + + if (ret) + *ret = retval; } static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index dd07d33a927c..82f51dbd0d66 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -346,43 +346,17 @@ int brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev, return status; } -/* Read client card reg */ -static int -brcmf_sdioh_card_regread(struct brcmf_sdio_dev *sdiodev, int func, u32 regaddr, - int regsize, u32 *data) -{ - - if ((func == 0) || (regsize == 1)) { - u8 temp = 0; - - brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, func, regaddr, - &temp); - *data = temp; - *data &= 0xff; - brcmf_dbg(DATA, "byte read data=0x%02x\n", *data); - } else { - brcmf_sdioh_request_word(sdiodev, SDIOH_READ, func, regaddr, - data, regsize); - if (regsize == 2) - *data &= 0xffff; - - brcmf_dbg(DATA, "word read data=0x%08x\n", *data); - } - - return SUCCESS; -} - static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr) { /* read 24 bits and return valid 17 bit addr */ - int i; + int i, ret; u32 scratch, regdata; __le32 scratch_le; u8 *ptr = (u8 *)&scratch_le; for (i = 0; i < 3; i++) { - if ((brcmf_sdioh_card_regread(sdiodev, 0, regaddr, 1, - ®data)) != SUCCESS) + regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret); + if (ret != 0) brcmf_dbg(ERROR, "Can't read!\n"); *ptr++ = (u8) regdata; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 149ee67beb2e..1dbf2be478c8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -629,43 +629,29 @@ static bool data_ok(struct brcmf_sdio *bus) * Reads a register in the SDIO hardware block. This block occupies a series of * adresses on the 32 bit backplane bus. */ -static void -r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 reg_offset, u32 *retryvar) +static int +r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) { u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - *retryvar = 0; - do { - *regvar = brcmf_sdcard_reg_read(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - sizeof(u32)); - } while (brcmf_sdcard_regfail(bus->sdiodev) && - (++(*retryvar) <= retry_limit)); - if (*retryvar) { - bus->regfails += (*retryvar-1); - if (*retryvar > retry_limit) { - brcmf_dbg(ERROR, "FAILED READ %Xh\n", reg_offset); - *regvar = 0; - } - } + int ret; + + *regvar = brcmf_sdio_regrl(bus->sdiodev, + bus->ci->c_inf[idx].base + offset, &ret); + + return ret; } -static void -w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset, u32 *retryvar) +static int +w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) { u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - *retryvar = 0; - do { - brcmf_sdcard_reg_write(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - sizeof(u32), regval); - } while (brcmf_sdcard_regfail(bus->sdiodev) && - (++(*retryvar) <= retry_limit)); - if (*retryvar) { - bus->regfails += (*retryvar-1); - if (*retryvar > retry_limit) - brcmf_dbg(ERROR, "FAILED REGISTER WRITE %Xh\n", - reg_offset); - } + int ret; + + brcmf_sdio_regwl(bus->sdiodev, + bus->ci->c_inf[idx].base + reg_offset, + regval, &ret); + + return ret; } #define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) @@ -697,16 +683,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); if (err) { brcmf_dbg(ERROR, "HT Avail request error: %d\n", err); return -EBADE; } /* Check current status */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "HT Avail read error: %d\n", err); return -EBADE; @@ -715,9 +701,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) /* Go to pending and await interrupt if appropriate */ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { /* Allow only clock-available interrupt */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "Devctl error setting CA: %d\n", err); @@ -725,30 +710,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); brcmf_dbg(INFO, "CLKCTL: set PENDING\n"); bus->clkstate = CLK_PENDING; return 0; } else if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + devctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } /* Otherwise, wait here (polling) for HT Avail */ timeout = jiffies + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); if (time_after(jiffies, timeout)) break; else @@ -781,17 +764,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } bus->clkstate = CLK_SDONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); brcmf_dbg(INFO, "CLKCTL: turned OFF\n"); if (err) { brcmf_dbg(ERROR, "Failed access turning clock off: %d\n", @@ -874,7 +856,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) { - uint retries = 0; + int ret; brcmf_dbg(INFO, "request %s (currently %s)\n", sleep ? "SLEEP" : "WAKE", @@ -894,22 +876,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Tell device to start using OOB wakeup */ - w_sdreg32(bus, SMB_USE_OOB, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); - if (retries > retry_limit) + ret = w_sdreg32(bus, SMB_USE_OOB, + offsetof(struct sdpcmd_regs, tosbmailbox)); + if (ret != 0) brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n"); /* Turn off our contribution to the HT clock request */ brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); /* Isolate the bus */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, - SBSDIO_DEVCTL_PADS_ISO, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + SBSDIO_DEVCTL_PADS_ISO, NULL); /* Change state */ bus->sleeping = true; @@ -917,21 +897,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) } else { /* Waking up: bus power up is ok, set local state */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + 0, NULL); /* Make sure the controller has the bus up */ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Send misc interrupt to indicate OOB not needed */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, tosbmailboxdata), - &retries); - if (retries <= retry_limit) - w_sdreg32(bus, SMB_DEV_INT, - offsetof(struct sdpcmd_regs, tosbmailbox), - &retries); - - if (retries > retry_limit) + ret = w_sdreg32(bus, 0, + offsetof(struct sdpcmd_regs, tosbmailboxdata)); + if (ret == 0) + ret = w_sdreg32(bus, SMB_DEV_INT, + offsetof(struct sdpcmd_regs, tosbmailbox)); + + if (ret != 0) brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n"); /* Make sure we have SD bus access */ @@ -955,17 +934,17 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) u32 intstatus = 0; u32 hmb_data; u8 fcbits; - uint retries = 0; + int ret; brcmf_dbg(TRACE, "Enter\n"); /* Read mailbox data and ack that we did so */ - r_sdreg32(bus, &hmb_data, - offsetof(struct sdpcmd_regs, tohostmailboxdata), &retries); + ret = r_sdreg32(bus, &hmb_data, + offsetof(struct sdpcmd_regs, tohostmailboxdata)); - if (retries <= retry_limit) + if (ret == 0) w_sdreg32(bus, SMB_INT_ACK, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); + offsetof(struct sdpcmd_regs, tosbmailbox)); bus->f1regdata += 2; /* Dongle recomposed rx frames, accept them again */ @@ -1040,17 +1019,16 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) if (abort) brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, - SFC_RF_TERM, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_RF_TERM, &err); bus->f1regdata++; /* Wait until the packet has been flushed (device/FIFO stable) */ for (lastrbc = retries = 0xffff; retries > 0; retries--) { - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCHI, NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCLO, NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCHI, &err); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCLO, &err); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) @@ -1070,11 +1048,11 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) if (rtx) { bus->rxrtx++; - w_sdreg32(bus, SMB_NAK, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); + err = w_sdreg32(bus, SMB_NAK, + offsetof(struct sdpcmd_regs, tosbmailbox)); bus->f1regdata++; - if (retries <= retry_limit) + if (err == 0) bus->rxskip = true; } @@ -1082,7 +1060,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) bus->nextlen = 0; /* If we can't reach the device, signal failure */ - if (err || brcmf_sdcard_regfail(bus->sdiodev)) + if (err) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } @@ -2178,21 +2156,16 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, bus->tx_sderrs++; brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, - NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2219,7 +2192,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; u32 intstatus = 0; - uint retries = 0; int ret = 0, prec_out; uint cnt = 0; uint datalen; @@ -2249,11 +2221,11 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { /* Check device status, signal pending interrupt */ - r_sdreg32(bus, &intstatus, - offsetof(struct sdpcmd_regs, intstatus), - &retries); + ret = r_sdreg32(bus, &intstatus, + offsetof(struct sdpcmd_regs, + intstatus)); bus->f2txdata++; - if (brcmf_sdcard_regfail(bus->sdiodev)) + if (ret != 0) break; if (intstatus & bus->hostintmask) bus->ipend = true; @@ -2275,7 +2247,6 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) { u32 local_hostintmask; u8 saveclk; - uint retries; int err; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; @@ -2303,7 +2274,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Disable and clear interrupts at the chip level also */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries); + w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); local_hostintmask = bus->hostintmask; bus->hostintmask = 0; @@ -2311,24 +2282,23 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err); /* Turn off the bus (F2), free any pending packets */ brcmf_dbg(INTR, "disable SDIO interrupts\n"); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, + NULL); /* Clear any pending interrupts now that F2 is disabled */ w_sdreg32(bus, local_hostintmask, - offsetof(struct sdpcmd_regs, intstatus), &retries); + offsetof(struct sdpcmd_regs, intstatus)); /* Turn off the backplane clock (only) */ brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); @@ -2373,12 +2343,12 @@ static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) { u32 intstatus, newstatus = 0; - uint retries = 0; uint rxlimit = bus->rxbound; /* Rx frames to read before resched */ uint txlimit = bus->txbound; /* Tx frames to send before resched */ uint framecnt = 0; /* Temporary counter of tx/rx frames */ bool rxdone = true; /* Flag for no more read data */ bool resched = false; /* Flag indicating resched wanted */ + int err; brcmf_dbg(TRACE, "Enter\n"); @@ -2389,13 +2359,12 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* If waiting for HTAVAIL, check status */ if (bus->clkstate == CLK_PENDING) { - int err; u8 clkctl, devctl = 0; #ifdef DEBUG /* Check for inconsistent device control */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; @@ -2403,8 +2372,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "error reading CSR: %d\n", err); @@ -2415,17 +2384,16 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) devctl, clkctl); if (SBSDIO_HTAV(clkctl)) { - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); if (err) { brcmf_dbg(ERROR, "error writing DEVCTL: %d\n", err); @@ -2447,17 +2415,17 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* Pending interrupt indicates new device status */ if (bus->ipend) { bus->ipend = false; - r_sdreg32(bus, &newstatus, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = r_sdreg32(bus, &newstatus, + offsetof(struct sdpcmd_regs, intstatus)); bus->f1regdata++; - if (brcmf_sdcard_regfail(bus->sdiodev)) + if (err != 0) newstatus = 0; newstatus &= bus->hostintmask; bus->fcstate = !!(newstatus & I_HMB_FC_STATE); if (newstatus) { - w_sdreg32(bus, newstatus, - offsetof(struct sdpcmd_regs, intstatus), - &retries); + err = w_sdreg32(bus, newstatus, + offsetof(struct sdpcmd_regs, + intstatus)); bus->f1regdata++; } } @@ -2472,11 +2440,11 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) */ if (intstatus & I_HMB_FC_CHANGE) { intstatus &= ~I_HMB_FC_CHANGE; - w_sdreg32(bus, I_HMB_FC_CHANGE, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = w_sdreg32(bus, I_HMB_FC_CHANGE, + offsetof(struct sdpcmd_regs, intstatus)); - r_sdreg32(bus, &newstatus, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = r_sdreg32(bus, &newstatus, + offsetof(struct sdpcmd_regs, intstatus)); bus->f1regdata += 2; bus->fcstate = !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)); @@ -2546,21 +2514,18 @@ clkwait: brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, - NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, &err); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, + &err); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, + &err); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2587,10 +2552,8 @@ clkwait: else await next interrupt */ /* On failed register access, all bets are off: no resched or interrupts */ - if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || - brcmf_sdcard_regfail(bus->sdiodev)) { - brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n", - brcmf_sdcard_regfail(bus->sdiodev)); + if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) { + brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n"); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->intstatus = 0; } else if (bus->clkstate == CLK_PENDING) { @@ -2886,19 +2849,16 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if (hi == 0 && lo == 0) break; @@ -3188,7 +3148,6 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus) static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) { - uint retries; int bcmerror = 0; struct chip_info *ci = bus->ci; @@ -3222,7 +3181,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) } w_sdreg32(bus, 0xFFFFFFFF, - offsetof(struct sdpcmd_regs, intstatus), &retries); + offsetof(struct sdpcmd_regs, intstatus)); ci->resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3); @@ -3444,7 +3403,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; unsigned long timeout; - uint retries = 0; u8 ready, enable; int err, ret = 0; u8 saveclk; @@ -3472,13 +3430,11 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) goto exit; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) { brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err); @@ -3487,17 +3443,16 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Enable function 2 (frame transfers) */ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, - offsetof(struct sdpcmd_regs, tosbmailboxdata), &retries); + offsetof(struct sdpcmd_regs, tosbmailboxdata)); enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - enable, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); ready = 0; while (enable != ready) { - ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IORx, NULL); + ready = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_IORx, NULL); if (time_after(jiffies, timeout)) break; else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) @@ -3512,21 +3467,18 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Set up the interrupt mask and enable interrupts */ bus->hostintmask = HOSTINTMASK; w_sdreg32(bus, bus->hostintmask, - offsetof(struct sdpcmd_regs, hostintmask), &retries); + offsetof(struct sdpcmd_regs, hostintmask)); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_WATERMARK, 8, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); } else { /* Disable F2 again */ enable = SDIO_FUNC_ENABLE_1; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IOEx, enable, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); ret = -ENODEV; } /* Restore previous clock setting */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); if (ret == 0) { ret = brcmf_sdio_intr_register(bus->sdiodev); @@ -3606,9 +3558,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) if (!bus->dpc_sched) { u8 devpend; - devpend = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_0, SDIO_CCCR_INTx, - NULL); + devpend = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_INTx, + NULL); intstatus = devpend & (INTR_STATUS_FUNC1 | INTR_STATUS_FUNC2); @@ -3732,24 +3684,18 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) bus->alp_only = true; - /* Return the window to backplane enumeration space for core access */ - if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE)) - brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n"); - pr_debug("F1 signature read @0x18000000=0x%4x\n", - brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4)); + brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* * Force PLL off until brcmf_sdio_chip_attach() * programs PLL control regs */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - BRCMF_INIT_CLKCTL1, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + BRCMF_INIT_CLKCTL1, &err); if (!err) - clkctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + clkctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { @@ -3782,9 +3728,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); reg_addr = bus->ci->c_inf[idx].base + offsetof(struct sdpcmd_regs, corecontrol); - reg_val = brcmf_sdcard_reg_read(bus->sdiodev, reg_addr, sizeof(u32)); - brcmf_sdcard_reg_write(bus->sdiodev, reg_addr, sizeof(u32), - reg_val | CC_BPRESEN); + reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL); + brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL); brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); @@ -3809,16 +3754,15 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); /* Disable F2 to clear any intermediate frame state on the dongle */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, + SDIO_FUNC_ENABLE_1, NULL); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->sleeping = false; bus->rxflow = false; /* Done with backplane-dependent accesses, can drop clock... */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); /* ...and initialize clock/power states */ bus->clkstate = CLK_SDONLY; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 1534efc21631..f8e1f1c84d08 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -93,8 +93,9 @@ brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidhigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbidhigh), + NULL); return SBCOREREV(regdata); } @@ -118,8 +119,9 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); return (SSB_TMSLOW_CLOCK == regdata); @@ -135,13 +137,13 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4); + regdata = brcmf_sdio_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); return ret; @@ -151,84 +153,85 @@ static void brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, u16 coreid) { - u32 regdata; + u32 regdata, base; u8 idx; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + base = ci->c_inf[idx].base; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if (regdata & SSB_TMSLOW_RESET) return; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if ((regdata & SSB_TMSLOW_CLOCK) != 0) { /* * set target reject and spin until busy is clear * (preserve core-specific bits) */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - 4, regdata | SSB_TMSLOW_REJECT); - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata | SSB_TMSLOW_REJECT, NULL); + + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4) & + SPINWAIT((brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL) & SSB_TMSHIGH_BUSY), 100000); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_BUSY) brcmf_dbg(ERROR, "core state still busy\n"); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidlow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) | - SSB_IMSTATE_REJECT; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); + regdata |= SSB_IMSTATE_REJECT; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) & + SPINWAIT((brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL) & SSB_IMSTATE_BUSY), 100000); } /* set reset and reject while enabling the clocks */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - (SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | - SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET)); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata, NULL); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); udelay(10); /* clear the initiator reject bit */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidlow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) & - ~SSB_IMSTATE_REJECT; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); + regdata &= ~SSB_IMSTATE_REJECT; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); } } /* leave reset and reject asserted */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET)); + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); udelay(1); } @@ -242,20 +245,19 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); /* if core is already in reset, just return */ - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4); + regdata = brcmf_sdio_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); if ((regdata & BCMA_RESET_CTL_RESET) != 0) return; - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, 0); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, 0, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); udelay(10); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4, BCMA_RESET_CTL_RESET); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + BCMA_RESET_CTL_RESET, NULL); udelay(1); } @@ -279,41 +281,47 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, * set reset while enabling the clock and * forcing them on throughout the core */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, + NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* clear any serror */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_SERR) - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4, 0); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + 0, NULL); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + NULL); if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO)); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), + NULL); /* clear reset and allow it to propagate throughout the core */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* leave clock enabled */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - 4, SSB_TMSLOW_CLOCK); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); } @@ -330,18 +338,18 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_ai_coredisable(sdiodev, ci, coreid); /* now do initialization sequence */ - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4, 0); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + 0, NULL); udelay(1); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, BCMA_IOCTL_CLK); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); udelay(1); } @@ -358,8 +366,9 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, */ ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; ci->c_inf[0].base = regs; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipid), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(ci->c_inf[0].base, chipid), + NULL); ci->chip = regdata & CID_ID_MASK; ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; ci->socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; @@ -428,8 +437,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* Try forcing SDIO core to do ALPAvail request only */ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); if (err) { brcmf_dbg(ERROR, "error writing for HT off\n"); return err; @@ -437,8 +445,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* If register supported, wait for ALPAvail and then force ALP */ /* This may take up to 15 milliseconds */ - clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL); + clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); if ((clkval & ~SBSDIO_AVBITS) != clkset) { brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n", @@ -446,8 +454,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) return -EACCES; } - SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), !SBSDIO_ALPAV(clkval)), PMU_MAX_TRANSITION_DLY); if (!SBSDIO_ALPAV(clkval)) { @@ -457,13 +465,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) } clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); udelay(65); /* Also, disable the extra SDIO pull-ups */ - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); return 0; } @@ -472,18 +478,22 @@ static void brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci) { + u32 base = ci->c_inf[0].base; + /* get chipcommon rev */ ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id); /* get chipcommon capabilites */ - ci->c_inf[0].caps = - brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, capabilities), 4); + ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, capabilities), + NULL); /* get pmu caps & rev */ if (ci->c_inf[0].caps & CC_CAP_PMU) { - ci->pmucaps = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, pmucapabilities), 4); + ci->pmucaps = + brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, pmucapabilities), + NULL); ci->pmurev = ci->pmucaps & PCAP_REV_MASK; } @@ -523,10 +533,10 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_chip_buscoresetup(sdiodev, ci); - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, gpiopullup), 4, 0); - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), 4, 0); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), + 0, NULL); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), + 0, NULL); *ci_ptr = ci; return 0; @@ -562,6 +572,7 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, u32 str_mask = 0; u32 str_shift = 0; char chn[8]; + u32 base = ci->c_inf[0].base; if (!(ci->c_inf[0].caps & CC_CAP_PMU)) return; @@ -591,17 +602,17 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, } } - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), - 4, 1); - cc_data_temp = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), 4); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr), + 1, NULL); + cc_data_temp = + brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, chipcontrol_addr), + NULL); cc_data_temp &= ~str_mask; drivestrength_sel <<= str_shift; cc_data_temp |= drivestrength_sel; - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), - 4, cc_data_temp); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr), + cc_data_temp, NULL); brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n", drivestrength, cc_data_temp); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 7010eaf71f99..29bf78d264e0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -40,6 +40,10 @@ /* Maximum number of I/O funcs */ #define SDIOD_MAX_IOFUNCS 7 +/* mask of register map */ +#define REG_F0_REG_MASK 0x7FF +#define REG_F1_MISC_MASK 0x1FFFF + /* as of sdiod rev 0, supports 3 functions */ #define SBSDIO_NUM_FUNCTION 3 @@ -142,7 +146,6 @@ struct brcmf_sdio_dev { u8 num_funcs; /* Supported funcs on client */ u32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; u32 sbwad; /* Save backplane window address */ - bool regfail; /* status of last reg_r/w call */ void *bus; atomic_t suspend; /* suspend flag */ wait_queue_head_t request_byte_wait; @@ -164,31 +167,13 @@ struct brcmf_sdio_dev { extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev); extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev); -/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface). - * fn: function number - * addr: unmodified SDIO-space address - * data: data byte to write - * err: pointer to error code (or NULL) - */ -extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func, - u32 addr, int *err); -extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func, - u32 addr, u8 data, int *err); - -/* Synchronous access to device (client) core registers via CMD53 to F1. - * addr: backplane address (i.e. >= regsva from attach) - * size: register width in bytes (2 or 4) - * data: data for register write - */ -extern u32 -brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size); - -extern u32 -brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size, - u32 data); - -/* Indicate if last reg read/write failed */ -extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev); +/* sdio device register access interface */ +extern u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +extern u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +extern void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, + u8 data, int *ret); +extern void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, + u32 data, int *ret); /* Buffer transfer to/from device (client) core via cmd53. * fn: function number diff --git a/drivers/net/wireless/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/brcm80211/brcmsmac/Makefile index c2eb2d0af386..e227c4c68ef9 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile @@ -39,10 +39,7 @@ BRCMSMAC_OFILES := \ phy/phytbl_lcn.o \ phy/phytbl_n.o \ phy/phy_qmath.o \ - otp.o \ - srom.o \ dma.o \ - nicpci.o \ brcms_trace_events.o MODULEPFX := brcmsmac diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c index c93ea35bceec..6d8b7213643a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -19,7 +19,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/delay.h> -#include <linux/pci.h> #include <defs.h> #include <chipcommon.h> @@ -29,8 +28,6 @@ #include "types.h" #include "pub.h" #include "pmu.h" -#include "srom.h" -#include "nicpci.h" #include "aiutils.h" /* slow_clk_ctl */ @@ -321,7 +318,6 @@ #define IS_SIM(chippkg) \ ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) -#define PCI(sih) (ai_get_buscoretype(sih) == PCI_CORE_ID) #define PCIE(sih) (ai_get_buscoretype(sih) == PCIE_CORE_ID) #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID)) @@ -454,36 +450,9 @@ struct aidmp { u32 componentid3; /* 0xffc */ }; -/* return true if PCIE capability exists in the pci config space */ -static bool ai_ispcie(struct si_info *sii) -{ - u8 cap_ptr; - - cap_ptr = - pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL, - NULL); - if (!cap_ptr) - return false; - - return true; -} - -static bool ai_buscore_prep(struct si_info *sii) -{ - /* kludge to enable the clock on the 4306 which lacks a slowclock */ - if (!ai_ispcie(sii)) - ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); - return true; -} - static bool ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) { - struct bcma_device *pci = NULL; - struct bcma_device *pcie = NULL; - struct bcma_device *core; - - /* no cores found, bail out */ if (cc->bus->nr_cores == 0) return false; @@ -492,8 +461,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) sii->pub.ccrev = cc->id.rev; /* get chipcommon chipstatus */ - if (ai_get_ccrev(&sii->pub) >= 11) - sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); + sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); /* get chipcommon capabilites */ sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities)); @@ -506,64 +474,18 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) } /* figure out buscore */ - list_for_each_entry(core, &cc->bus->cores, list) { - uint cid, crev; - - cid = core->id.id; - crev = core->id.rev; - - if (cid == PCI_CORE_ID) { - pci = core; - } else if (cid == PCIE_CORE_ID) { - pcie = core; - } - } - - if (pci && pcie) { - if (ai_ispcie(sii)) - pci = NULL; - else - pcie = NULL; - } - if (pci) { - sii->buscore = pci; - } else if (pcie) { - sii->buscore = pcie; - } - - /* fixup necessary chip/core configurations */ - if (!sii->pch) { - sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core); - if (sii->pch == NULL) - return false; - } - if (ai_pci_fixcfg(&sii->pub)) - return false; + sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0); return true; } -/* - * get boardtype and boardrev - */ -static __used void ai_nvram_process(struct si_info *sii) -{ - uint w = 0; - - /* do a pci config read to get subsystem id and subvendor id */ - pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w); - - sii->pub.boardvendor = w & 0xffff; - sii->pub.boardtype = (w >> 16) & 0xffff; -} - static struct si_info *ai_doattach(struct si_info *sii, struct bcma_bus *pbus) { struct si_pub *sih = &sii->pub; u32 w, savewin; struct bcma_device *cc; - uint socitype; + struct ssb_sprom *sprom = &pbus->sprom; savewin = 0; @@ -573,38 +495,15 @@ static struct si_info *ai_doattach(struct si_info *sii, /* switch to Chipcommon core */ cc = pbus->drv_cc.core; - /* bus/core/clk setup for register access */ - if (!ai_buscore_prep(sii)) - return NULL; + sih->chip = pbus->chipinfo.id; + sih->chiprev = pbus->chipinfo.rev; + sih->chippkg = pbus->chipinfo.pkg; + sih->boardvendor = pbus->boardinfo.vendor; + sih->boardtype = pbus->boardinfo.type; - /* - * ChipID recognition. - * We assume we can read chipid at offset 0 from the regs arg. - * If we add other chiptypes (or if we need to support old sdio - * hosts w/o chipcommon), some way of recognizing them needs to - * be added here. - */ - w = bcma_read32(cc, CHIPCREGOFFS(chipid)); - socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT; - /* Might as wll fill in chip id rev & pkg */ - sih->chip = w & CID_ID_MASK; - sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT; - sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT; - - /* scan for cores */ - if (socitype != SOCI_AI) - return NULL; - - SI_MSG("Found chip type AI (0x%08x)\n", w); if (!ai_buscore_setup(sii, cc)) goto exit; - /* Init nvram from sprom/otp if they exist */ - if (srom_var_init(&sii->pub)) - goto exit; - - ai_nvram_process(sii); - /* === NVRAM, clock is ready === */ bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0); bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0); @@ -617,15 +516,13 @@ static struct si_info *ai_doattach(struct si_info *sii, } /* setup the GPIO based LED powersave register */ - w = getintvar(sih, BRCMS_SROM_LEDDC); + w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT); if (w == 0) w = DEFAULT_GPIOTIMERVAL; ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval), ~0, w); - if (PCIE(sih)) - pcicore_attach(sii->pch, SI_DOATTACH); - if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) { /* * enable 12 mA drive strenth for 43224 and @@ -659,9 +556,6 @@ static struct si_info *ai_doattach(struct si_info *sii, return sii; exit: - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; return NULL; } @@ -700,11 +594,6 @@ void ai_detach(struct si_pub *sih) if (sii == NULL) return; - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; - - srom_free_vars(sih); kfree(sii); } @@ -755,21 +644,7 @@ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val) /* return the slow clock source - LPO, XTAL, or PCI */ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) { - struct si_info *sii; - u32 val; - - sii = (struct si_info *)sih; - if (ai_get_ccrev(&sii->pub) < 6) { - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, - &val); - if (val & PCI_CFG_GPIO_SCS) - return SCC_SS_PCI; - return SCC_SS_XTAL; - } else if (ai_get_ccrev(&sii->pub) < 10) { - return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & - SCC_SS_MASK; - } else /* Insta-clock */ - return SCC_SS_XTAL; + return SCC_SS_XTAL; } /* @@ -779,36 +654,12 @@ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq, struct bcma_device *cc) { - u32 slowclk; uint div; - slowclk = ai_slowclk_src(sih, cc); - if (ai_get_ccrev(sih) < 6) { - if (slowclk == SCC_SS_PCI) - return max_freq ? (PCIMAXFREQ / 64) - : (PCIMINFREQ / 64); - else - return max_freq ? (XTALMAXFREQ / 32) - : (XTALMINFREQ / 32); - } else if (ai_get_ccrev(sih) < 10) { - div = 4 * - (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & - SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); - if (slowclk == SCC_SS_LPO) - return max_freq ? LPOMAXFREQ : LPOMINFREQ; - else if (slowclk == SCC_SS_XTAL) - return max_freq ? (XTALMAXFREQ / div) - : (XTALMINFREQ / div); - else if (slowclk == SCC_SS_PCI) - return max_freq ? (PCIMAXFREQ / div) - : (PCIMINFREQ / div); - } else { - /* Chipc rev 10 is InstaClock */ - div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); - div = 4 * ((div >> SYCC_CD_SHIFT) + 1); - return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); - } - return 0; + /* Chipc rev 10 is InstaClock */ + div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); + div = 4 * ((div >> SYCC_CD_SHIFT) + 1); + return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); } static void @@ -831,8 +682,7 @@ ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc) /* Starting with 4318 it is ILP that is used for the delays */ slowmaxfreq = - ai_slowclk_freq(sih, - (ai_get_ccrev(sih) >= 10) ? false : true, cc); + ai_slowclk_freq(sih, false, cc); pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; @@ -854,9 +704,8 @@ void ai_clkctl_init(struct si_pub *sih) return; /* set all Instaclk chip ILP to 1 MHz */ - if (ai_get_ccrev(sih) >= 10) - bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, - (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); + bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, + (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ai_clkctl_setdelay(sih, cc); } @@ -891,140 +740,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) return fpdelay; } -/* turn primary xtal and/or pll off/on */ -int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) -{ - struct si_info *sii; - u32 in, out, outen; - - sii = (struct si_info *)sih; - - /* pcie core doesn't have any mapping to control the xtal pu */ - if (PCIE(sih)) - return -1; - - pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen); - - /* - * Avoid glitching the clock if GPRS is already using it. - * We can't actually read the state of the PLLPD so we infer it - * by the value of XTAL_PU which *is* readable via gpioin. - */ - if (on && (in & PCI_CFG_GPIO_XTAL)) - return 0; - - if (what & XTAL) - outen |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - outen |= PCI_CFG_GPIO_PLL; - - if (on) { - /* turn primary xtal on */ - if (what & XTAL) { - out |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - udelay(XTAL_ON_DELAY); - } - - /* turn pll on */ - if (what & PLL) { - out &= ~PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - mdelay(2); - } - } else { - if (what & XTAL) - out &= ~PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - } - - return 0; -} - -/* clk control mechanism through chipcommon, no policy checking */ -static bool _ai_clkctl_cc(struct si_info *sii, uint mode) -{ - struct bcma_device *cc; - u32 scc; - - /* chipcommon cores prior to rev6 don't support dynamic clock control */ - if (ai_get_ccrev(&sii->pub) < 6) - return false; - - cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); - - if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) && - (ai_get_ccrev(&sii->pub) < 20)) - return mode == CLK_FAST; - - switch (mode) { - case CLK_FAST: /* FORCEHT, fast (pll) clock */ - if (ai_get_ccrev(&sii->pub) < 10) { - /* - * don't forget to force xtal back - * on before we clear SCC_DYN_XTAL.. - */ - ai_clkctl_xtal(&sii->pub, XTAL, ON); - bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl), - (SCC_XC | SCC_FS | SCC_IP), SCC_IP); - } else if (ai_get_ccrev(&sii->pub) < 20) { - bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR); - } else { - bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT); - } - - /* wait for the PLL */ - if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { - u32 htavail = CCS_HTAVAIL; - SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) & - htavail) == 0), PMU_MAX_TRANSITION_DLY); - } else { - udelay(PLL_DELAY); - } - break; - - case CLK_DYNAMIC: /* enable dynamic clock control */ - if (ai_get_ccrev(&sii->pub) < 10) { - scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)); - scc &= ~(SCC_FS | SCC_IP | SCC_XC); - if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) - scc |= SCC_XC; - bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc); - - /* - * for dynamic control, we have to - * release our xtal_pu "force on" - */ - if (scc & SCC_XC) - ai_clkctl_xtal(&sii->pub, XTAL, OFF); - } else if (ai_get_ccrev(&sii->pub) < 20) { - /* Instaclock */ - bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR); - } else { - bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT); - } - break; - - default: - break; - } - - return mode == CLK_FAST; -} - /* * clock control policy function throught chipcommon * @@ -1033,133 +748,53 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) * this is a wrapper over the next internal function * to allow flexible policy settings for outside caller */ -bool ai_clkctl_cc(struct si_pub *sih, uint mode) +bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; - /* chipcommon cores prior to rev6 don't support dynamic clock control */ - if (ai_get_ccrev(sih) < 6) - return false; - if (PCI_FORCEHT(sih)) - return mode == CLK_FAST; + return mode == BCMA_CLKMODE_FAST; - return _ai_clkctl_cc(sii, mode); + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, mode); + return mode == BCMA_CLKMODE_FAST; } void ai_pci_up(struct si_pub *sih) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; - if (PCI_FORCEHT(sih)) - _ai_clkctl_cc(sii, CLK_FAST); + if (PCI_FORCEHT(sih)) { + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST); + } if (PCIE(sih)) - pcicore_up(sii->pch, SI_PCIUP); - -} - -/* Unconfigure and/or apply various WARs when system is going to sleep mode */ -void ai_pci_sleep(struct si_pub *sih) -{ - struct si_info *sii; - - sii = (struct si_info *)sih; - - pcicore_sleep(sii->pch); + bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true); } /* Unconfigure and/or apply various WARs when going down */ void ai_pci_down(struct si_pub *sih) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; /* release FORCEHT since chip is going to "down" state */ - if (PCI_FORCEHT(sih)) - _ai_clkctl_cc(sii, CLK_DYNAMIC); - - pcicore_down(sii->pch, SI_PCIDOWN); -} - -/* - * Configure the pci core for pci client (NIC) action - * coremask is the bitvec of cores by index to be enabled. - */ -void ai_pci_setup(struct si_pub *sih, uint coremask) -{ - struct si_info *sii; - u32 w; - - sii = (struct si_info *)sih; - - /* - * Enable sb->pci interrupts. Assume - * PCI rev 2.3 support was added in pci core rev 6 and things changed.. - */ - if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) { - /* pci config write to set this core bit in PCIIntMask */ - pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); - w |= (coremask << PCI_SBIM_SHIFT); - pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); - } - - if (PCI(sih)) { - pcicore_pci_setup(sii->pch); + if (PCI_FORCEHT(sih)) { + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC); } -} -/* - * Fixup SROMless PCI device's configuration. - * The current core may be changed upon return. - */ -int ai_pci_fixcfg(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - /* Fixup PI in SROM shadow area to enable the correct PCI core access */ - /* check 'pi' is correct and fix it if not */ - pcicore_fixcfg(sii->pch); - pcicore_hwup(sii->pch); - return 0; -} - -/* mask&set gpiocontrol bits */ -u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority) -{ - uint regoff; - - regoff = offsetof(struct chipcregs, gpiocontrol); - return ai_cc_reg(sih, regoff, mask, val); -} - -void ai_chipcontrl_epa4331(struct si_pub *sih, bool on) -{ - struct bcma_device *cc; - u32 val; - - cc = ai_findcore(sih, CC_CORE_ID, 0); - - if (on) { - if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb) - /* Ext PA Controls for 4331 12x9 Package */ - bcma_set32(cc, CHIPCREGOFFS(chipcontrol), - CCTRL4331_EXTPA_EN | - CCTRL4331_EXTPA_ON_GPIO2_5); - else - /* Ext PA Controls for 4331 12x12 Package */ - bcma_set32(cc, CHIPCREGOFFS(chipcontrol), - CCTRL4331_EXTPA_EN); - } else { - val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5); - bcma_mask32(cc, CHIPCREGOFFS(chipcontrol), - ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5)); - } + if (PCIE(sih)) + bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false); } /* Enable BT-COEX & Ex-PA for 4313 */ @@ -1181,6 +816,9 @@ bool ai_deviceremoved(struct si_pub *sih) sii = (struct si_info *)sih; + if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI) + return false; + pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w); if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) return true; @@ -1188,45 +826,6 @@ bool ai_deviceremoved(struct si_pub *sih) return false; } -bool ai_is_sprom_available(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - if (ai_get_ccrev(sih) >= 31) { - struct bcma_device *cc; - u32 sromctrl; - - if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0) - return false; - - cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol)); - return sromctrl & SRC_PRESENT; - } - - switch (ai_get_chip_id(sih)) { - case BCM4313_CHIP_ID: - return (sii->chipst & CST4313_SPROM_PRESENT) != 0; - default: - return true; - } -} - -bool ai_is_otp_disabled(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - switch (ai_get_chip_id(sih)) { - case BCM4313_CHIP_ID: - return (sii->chipst & CST4313_OTP_PRESENT) == 0; - /* These chips always have their OTP on */ - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - default: - return false; - } -} - uint ai_get_buscoretype(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h index f84c6f781692..d9f04a683bdb 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h @@ -113,10 +113,6 @@ #define XTAL 0x1 /* primary crystal oscillator (2050) */ #define PLL 0x2 /* main chip pll */ -/* clkctl clk mode */ -#define CLK_FAST 0 /* force fast (pll) clock */ -#define CLK_DYNAMIC 2 /* enable dynamic clock control */ - /* GPIO usage priorities */ #define GPIO_DRV_PRIORITY 0 /* Driver */ #define GPIO_APP_PRIORITY 1 /* Application */ @@ -172,9 +168,7 @@ struct si_info { struct si_pub pub; /* back plane public state (must be first) */ struct bcma_bus *icbus; /* handle to soc interconnect bus */ struct pci_dev *pcibus; /* handle to pci bus */ - struct pcicore_info *pch; /* PCI/E core handle */ struct bcma_device *buscore; - struct list_head var_list; /* list of srom variables */ u32 chipst; /* chip status */ }; @@ -197,38 +191,20 @@ extern u32 ai_core_cflags(struct bcma_device *core, u32 mask, u32 val); extern struct si_pub *ai_attach(struct bcma_bus *pbus); extern void ai_detach(struct si_pub *sih); extern uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val); -extern void ai_pci_setup(struct si_pub *sih, uint coremask); extern void ai_clkctl_init(struct si_pub *sih); extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih); extern bool ai_clkctl_cc(struct si_pub *sih, uint mode); -extern int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on); extern bool ai_deviceremoved(struct si_pub *sih); -extern u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, - u8 priority); - -/* OTP status */ -extern bool ai_is_otp_disabled(struct si_pub *sih); - -/* SPROM availability */ -extern bool ai_is_sprom_available(struct si_pub *sih); -extern void ai_pci_sleep(struct si_pub *sih); extern void ai_pci_down(struct si_pub *sih); extern void ai_pci_up(struct si_pub *sih); -extern int ai_pci_fixcfg(struct si_pub *sih); -extern void ai_chipcontrl_epa4331(struct si_pub *sih, bool on); /* Enable Ex-PA for 4313 */ extern void ai_epa_4313war(struct si_pub *sih); extern uint ai_get_buscoretype(struct si_pub *sih); extern uint ai_get_buscorerev(struct si_pub *sih); -static inline int ai_get_ccrev(struct si_pub *sih) -{ - return sih->ccrev; -} - static inline u32 ai_get_cccaps(struct si_pub *sih) { return sih->cccaps; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c index a47ce25cb9a2..55e12c327911 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c @@ -108,7 +108,7 @@ brcms_c_antsel_init_cfg(struct antsel_info *asi, struct brcms_antselcfg *antsel, struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) { struct antsel_info *asi; - struct si_pub *sih = wlc->hw->sih; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC); if (!asi) @@ -118,7 +118,7 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) asi->pub = wlc->pub; asi->antsel_type = ANTSEL_NA; asi->antsel_avail = false; - asi->antsel_antswitch = (u8) getintvar(sih, BRCMS_SROM_ANTSWITCH); + asi->antsel_antswitch = sprom->antswitch; if ((asi->pub->sromrev >= 4) && (asi->antsel_antswitch != 0)) { switch (asi->antsel_antswitch) { @@ -128,12 +128,12 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) /* 4321/2 board with 2x3 switch logic */ asi->antsel_type = ANTSEL_2x3; /* Antenna selection availability */ - if (((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) || - ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 7)) { + if ((sprom->ant_available_bg == 7) || + (sprom->ant_available_a == 7)) { asi->antsel_avail = true; } else if ( - (u16) getintvar(sih, BRCMS_SROM_AA2G) == 3 || - (u16) getintvar(sih, BRCMS_SROM_AA5G) == 3) { + sprom->ant_available_bg == 3 || + sprom->ant_available_a == 3) { asi->antsel_avail = false; } else { asi->antsel_avail = false; @@ -146,8 +146,8 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) break; } } else if ((asi->pub->sromrev == 4) && - ((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) && - ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 0)) { + (sprom->ant_available_bg == 7) && + (sprom->ant_available_a == 0)) { /* hack to match old 4321CB2 cards with 2of3 antenna switch */ asi->antsel_type = ANTSEL_2x3; asi->antsel_avail = true; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 0efe88e25a9a..eb77ac3cfb6b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -1110,7 +1110,7 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc) char country_abbrev[BRCM_CNTRY_BUF_SZ]; const struct country_info *country; struct brcms_pub *pub = wlc->pub; - char *ccode; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit); @@ -1122,9 +1122,8 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc) wlc->cmi = wlc_cm; /* store the country code for passing up as a regulatory hint */ - ccode = getvar(wlc->hw->sih, BRCMS_SROM_CCODE); - if (ccode && brcms_c_country_valid(ccode)) - strncpy(wlc->pub->srom_ccode, ccode, BRCM_CNTRY_BUF_SZ - 1); + if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2)) + strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2)); /* * internal country information which must match diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index aa15558f75c8..50f92a0b7c41 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -25,7 +25,6 @@ #include <linux/bcma/bcma.h> #include <net/mac80211.h> #include <defs.h> -#include "nicpci.h" #include "phy/phy_int.h" #include "d11.h" #include "channel.h" @@ -770,7 +769,7 @@ void brcms_dpc(unsigned long data) * Precondition: Since this function is called in brcms_pci_probe() context, * no locking is required. */ -static int brcms_request_fw(struct brcms_info *wl, struct pci_dev *pdev) +static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) { int status; struct device *device = &pdev->dev; @@ -1022,7 +1021,7 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev) spin_lock_init(&wl->isr_lock); /* prepare ucode */ - if (brcms_request_fw(wl, pdev->bus->host_pci) < 0) { + if (brcms_request_fw(wl, pdev) < 0) { wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in " "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm"); brcms_release_fw(wl); @@ -1043,12 +1042,12 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev) wl->pub->ieee_hw = hw; /* register our interrupt handler */ - if (request_irq(pdev->bus->host_pci->irq, brcms_isr, + if (request_irq(pdev->irq, brcms_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); goto fail; } - wl->irq = pdev->bus->host_pci->irq; + wl->irq = pdev->irq; /* register module */ brcms_c_module_register(wl->pub, "linux", wl, NULL); @@ -1098,7 +1097,7 @@ static int __devinit brcms_bcma_probe(struct bcma_device *pdev) dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, - pdev->bus->host_pci->irq); + pdev->irq); if ((pdev->id.manuf != BCMA_MANUF_BCM) || (pdev->id.id != BCMA_CORE_80211)) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index b4d92792c502..19db4052c44c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -1219,7 +1219,7 @@ static void brcms_b_wait_for_wake(struct brcms_hardware *wlc_hw) } /* control chip clock to save power, enable dynamic clock or force fast clock */ -static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) +static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, enum bcma_clkmode mode) { if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) { /* new chips with PMU, CCS_FORCEHT will distribute the HT clock @@ -1229,7 +1229,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) */ if (wlc_hw->clk) { - if (mode == CLK_FAST) { + if (mode == BCMA_CLKMODE_FAST) { bcma_set32(wlc_hw->d11core, D11REGOFFS(clk_ctl_st), CCS_FORCEHT); @@ -1260,7 +1260,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) ~CCS_FORCEHT); } } - wlc_hw->forcefastclk = (mode == CLK_FAST); + wlc_hw->forcefastclk = (mode == BCMA_CLKMODE_FAST); } else { /* old chips w/o PMU, force HT through cc, @@ -1567,7 +1567,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw) /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); wlc_phy_bw_state_set(wlc_hw->band->pi, bw); @@ -1576,7 +1576,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw) /* restore the clk */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } static void brcms_b_upd_synthpu(struct brcms_hardware *wlc_hw) @@ -1882,27 +1882,20 @@ static bool brcms_c_validboardtype(struct brcms_hardware *wlc_hw) return true; } -static char *brcms_c_get_macaddr(struct brcms_hardware *wlc_hw) +static void brcms_c_get_macaddr(struct brcms_hardware *wlc_hw, u8 etheraddr[ETH_ALEN]) { - enum brcms_srom_id var_id = BRCMS_SROM_MACADDR; - char *macaddr; + struct ssb_sprom *sprom = &wlc_hw->d11core->bus->sprom; /* If macaddr exists, use it (Sromrev4, CIS, ...). */ - macaddr = getvar(wlc_hw->sih, var_id); - if (macaddr != NULL) - return macaddr; + if (!is_zero_ether_addr(sprom->il0mac)) { + memcpy(etheraddr, sprom->il0mac, 6); + return; + } if (wlc_hw->_nbands > 1) - var_id = BRCMS_SROM_ET1MACADDR; + memcpy(etheraddr, sprom->et1mac, 6); else - var_id = BRCMS_SROM_IL0MACADDR; - - macaddr = getvar(wlc_hw->sih, var_id); - if (macaddr == NULL) - wiphy_err(wlc_hw->wlc->wiphy, "wl%d: wlc_get_macaddr: macaddr " - "getvar(%d) not found\n", wlc_hw->unit, var_id); - - return macaddr; + memcpy(etheraddr, sprom->il0mac, 6); } /* power both the pll and external oscillator on/off */ @@ -1917,9 +1910,6 @@ static void brcms_b_xtal(struct brcms_hardware *wlc_hw, bool want) if (!want && wlc_hw->pllreq) return; - if (wlc_hw->sih) - ai_clkctl_xtal(wlc_hw->sih, XTAL | PLL, want); - wlc_hw->sbclk = want; if (!wlc_hw->sbclk) { wlc_hw->clk = false; @@ -2004,7 +1994,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* reset the dma engines except first time thru */ if (bcma_core_is_enabled(wlc_hw->d11core)) { @@ -2053,7 +2043,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) brcms_c_mctrl_reset(wlc_hw); if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); brcms_b_phy_reset(wlc_hw); @@ -2065,7 +2055,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) /* restore the clk setting */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } /* txfifo sizes needs to be modified(increased) since the newer cores @@ -2218,7 +2208,7 @@ static void brcms_c_gpio_init(struct brcms_c_info *wlc) gm |= gc |= BOARD_GPIO_PACTRL; /* apply to gpiocontrol register */ - ai_gpiocontrol(wlc_hw->sih, gm, gc, GPIO_DRV_PRIORITY); + bcma_chipco_gpio_control(&wlc_hw->d11core->bus->drv_cc, gm, gc); } static void brcms_ucode_write(struct brcms_hardware *wlc_hw, @@ -3371,7 +3361,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) { /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* disable interrupts */ macintmask = brcms_intrsoff(wlc->wl); @@ -3405,7 +3395,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) { /* restore the clk */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } static void brcms_c_set_phy_chanspec(struct brcms_c_info *wlc, @@ -4436,17 +4426,22 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, uint unit, bool piomode) { struct brcms_hardware *wlc_hw; - char *macaddr = NULL; uint err = 0; uint j; bool wme = false; struct shared_phy_params sha_params; struct wiphy *wiphy = wlc->wiphy; struct pci_dev *pcidev = core->bus->host_pci; + struct ssb_sprom *sprom = &core->bus->sprom; - BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, - pcidev->vendor, - pcidev->device); + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) + BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, + pcidev->vendor, + pcidev->device); + else + BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, + core->bus->boardinfo.vendor, + core->bus->boardinfo.type); wme = true; @@ -4472,7 +4467,8 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, } /* verify again the device is supported */ - if (!brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI && + !brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported " "vendor/device (0x%x/0x%x)\n", unit, pcidev->vendor, pcidev->device); @@ -4480,8 +4476,13 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, goto fail; } - wlc_hw->vendorid = pcidev->vendor; - wlc_hw->deviceid = pcidev->device; + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { + wlc_hw->vendorid = pcidev->vendor; + wlc_hw->deviceid = pcidev->device; + } else { + wlc_hw->vendorid = core->bus->boardinfo.vendor; + wlc_hw->deviceid = core->bus->boardinfo.type; + } wlc_hw->d11core = core; wlc_hw->corerev = core->id.rev; @@ -4501,7 +4502,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, * is still false; But it will be called again inside wlc_corereset, * after d11 is out of reset. */ - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); if (!brcms_b_validate_chip_access(wlc_hw)) { @@ -4512,7 +4513,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, } /* get the board rev, used just below */ - j = getintvar(wlc_hw->sih, BRCMS_SROM_BOARDREV); + j = sprom->board_rev; /* promote srom boardrev of 0xFF to 1 */ if (j == BOARDREV_PROMOTABLE) j = BOARDREV_PROMOTED; @@ -4525,11 +4526,9 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, err = 15; goto fail; } - wlc_hw->sromrev = (u8) getintvar(wlc_hw->sih, BRCMS_SROM_REV); - wlc_hw->boardflags = (u32) getintvar(wlc_hw->sih, - BRCMS_SROM_BOARDFLAGS); - wlc_hw->boardflags2 = (u32) getintvar(wlc_hw->sih, - BRCMS_SROM_BOARDFLAGS2); + wlc_hw->sromrev = sprom->revision; + wlc_hw->boardflags = sprom->boardflags_lo + (sprom->boardflags_hi << 16); + wlc_hw->boardflags2 = sprom->boardflags2_lo + (sprom->boardflags2_hi << 16); if (wlc_hw->boardflags & BFL_NOPLLDOWN) brcms_b_pllreq(wlc_hw, true, BRCMS_PLLREQ_SHARED); @@ -4702,25 +4701,18 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, */ /* init etheraddr state variables */ - macaddr = brcms_c_get_macaddr(wlc_hw); - if (macaddr == NULL) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: macaddr not found\n", - unit); - err = 21; - goto fail; - } - if (!mac_pton(macaddr, wlc_hw->etheraddr) || - is_broadcast_ether_addr(wlc_hw->etheraddr) || + brcms_c_get_macaddr(wlc_hw, wlc_hw->etheraddr); + + if (is_broadcast_ether_addr(wlc_hw->etheraddr) || is_zero_ether_addr(wlc_hw->etheraddr)) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr %s\n", - unit, macaddr); + wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr\n", + unit); err = 22; goto fail; } - BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x macaddr: %s\n", - wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih), - macaddr); + BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x\n", + wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih)); return err; @@ -4770,16 +4762,16 @@ static bool brcms_c_attach_stf_ant_init(struct brcms_c_info *wlc) int aa; uint unit; int bandtype; - struct si_pub *sih = wlc->hw->sih; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; unit = wlc->pub->unit; bandtype = wlc->band->bandtype; /* get antennas available */ if (bandtype == BRCM_BAND_5G) - aa = (s8) getintvar(sih, BRCMS_SROM_AA5G); + aa = sprom->ant_available_a; else - aa = (s8) getintvar(sih, BRCMS_SROM_AA2G); + aa = sprom->ant_available_bg; if ((aa < 1) || (aa > 15)) { wiphy_err(wlc->wiphy, "wl%d: %s: Invalid antennas available in" @@ -4799,9 +4791,9 @@ static bool brcms_c_attach_stf_ant_init(struct brcms_c_info *wlc) /* Compute Antenna Gain */ if (bandtype == BRCM_BAND_5G) - wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG1); + wlc->band->antgain = sprom->antenna_gain.a1; else - wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG0); + wlc->band->antgain = sprom->antenna_gain.a0; brcms_c_attach_antgain_init(wlc); @@ -4952,15 +4944,6 @@ static int brcms_b_detach(struct brcms_c_info *wlc) callbacks = 0; - if (wlc_hw->sih) { - /* - * detach interrupt sync mechanism since interrupt is disabled - * and per-port interrupt object may has been freed. this must - * be done before sb core switch - */ - ai_pci_sleep(wlc_hw->sih); - } - brcms_b_detach_dmapio(wlc_hw); band = wlc_hw->band; @@ -5047,9 +5030,7 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) */ brcms_b_xtal(wlc_hw, ON); ai_clkctl_init(wlc_hw->sih); - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); - - ai_pci_fixcfg(wlc_hw->sih); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* * TODO: test suspend/resume @@ -5078,8 +5059,6 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) { - uint coremask; - BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit); /* @@ -5088,15 +5067,14 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) */ brcms_b_xtal(wlc_hw, ON); ai_clkctl_init(wlc_hw->sih); - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* * Configure pci/pcmcia here instead of in brcms_c_attach() * to allow mfg hotswap: down, hotswap (chip power cycle), up. */ - coremask = (1 << wlc_hw->wlc->core->coreidx); - - ai_pci_setup(wlc_hw->sih, coremask); + bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci, wlc_hw->d11core, + true); /* * Need to read the hwradio status here to cover the case where the @@ -5126,7 +5104,7 @@ static int brcms_b_up_finish(struct brcms_hardware *wlc_hw) wlc_phy_hw_state_upd(wlc_hw->band->pi, true); /* FULLY enable dynamic power control and d11 core interrupt */ - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); brcms_intrson(wlc_hw->wlc->wl); return 0; } @@ -5267,7 +5245,7 @@ static int brcms_b_bmac_down_prep(struct brcms_hardware *wlc_hw) brcms_intrsoff(wlc_hw->wlc->wl); /* ensure we're running on the pll clock again */ - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); } /* down phy at the last of this stage */ callbacks += wlc_phy_down(wlc_hw->band->pi); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c b/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c deleted file mode 100644 index 7fad6dc19258..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c +++ /dev/null @@ -1,826 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include <defs.h> -#include <soc.h> -#include <chipcommon.h> -#include "aiutils.h" -#include "pub.h" -#include "nicpci.h" - -/* SPROM offsets */ -#define SRSH_ASPM_OFFSET 4 /* word 4 */ -#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */ -#define SRSH_ASPM_L1_ENB 0x10 /* bit 4 */ -#define SRSH_ASPM_L0s_ENB 0x8 /* bit 3 */ - -#define SRSH_PCIE_MISC_CONFIG 5 /* word 5 */ -#define SRSH_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ -#define SRSH_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ -#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */ -#define SRSH_BD_OFFSET 6 /* word 6 */ - -/* chipcontrol */ -#define CHIPCTRL_4321_PLL_DOWN 0x800000/* serdes PLL down override */ - -/* MDIO control */ -#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -#define MDIOCTL_DIVISOR_VAL 0x2 -#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -#define MDIOCTL_ACCESS_DONE 0x100 /* Transaction complete */ - -/* MDIO Data */ -#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -#define MDIODATA_TA 0x00020000 /* Turnaround */ - -#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK 0x0f800000 - /* Physmedia devaddr Mask */ - -/* MDIO Data for older revisions < 10 */ -#define MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK_OLD 0x003c0000 - /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 - /* Physmedia devaddr Mask */ - -/* Transactions flags */ -#define MDIODATA_WRITE 0x10000000 -#define MDIODATA_READ 0x20000000 -#define MDIODATA_START 0x40000000 - -#define MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ - -/* serdes regs (rev < 10) */ -#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ - -/* SERDES RX registers */ -#define SERDES_RX_CTRL 1 /* Rx cntrl */ -#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ -#define SERDES_RX_CDR 6 /* CDR */ -#define SERDES_RX_CDRBW 7 /* CDR BW */ -/* SERDES RX control register */ -#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ - -/* SERDES PLL registers */ -#define SERDES_PLL_CTRL 1 /* PLL control reg */ -#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ - -/* Linkcontrol reg offset in PCIE Cap */ -#define PCIE_CAP_LINKCTRL_OFFSET 16 /* offset in pcie cap */ -#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */ -#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */ -#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */ - -#define PCIE_ASPM_ENAB 3 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L1_ENAB 2 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L0s_ENAB 1 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_DISAB 0 /* ASPM L0s & L1 in linkctrl */ - -/* Power management threshold */ -#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */ -#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */ -#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */ -#define PCIE_ASPMTIMER_EXTEND 0x01000000 - /* > rev7: - * enable extend ASPM timer - */ - -/* different register spaces to access thru pcie indirect access */ -#define PCIE_CONFIGREGS 1 /* Access to config space */ -#define PCIE_PCIEREGS 2 /* Access to pcie registers */ - -/* PCIE protocol PHY diagnostic registers */ -#define PCIE_PLP_STATUSREG 0x204 /* Status */ - -/* Status reg PCIE_PLP_STATUSREG */ -#define PCIE_PLP_POLARITYINV_STAT 0x10 - -/* PCIE protocol DLLP diagnostic registers */ -#define PCIE_DLLP_LCREG 0x100 /* Link Control */ -#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ - -/* PCIE protocol TLP diagnostic registers */ -#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ - -/* Sonics to PCI translation types */ -#define SBTOPCI_PREF 0x4 /* prefetch enable */ -#define SBTOPCI_BURST 0x8 /* burst enable */ -#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ - -#define PCI_CLKRUN_DSBL 0x8000 /* Bit 15 forceClkrun */ - -/* PCI core index in SROM shadow area */ -#define SRSH_PI_OFFSET 0 /* first word */ -#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ -#define SRSH_PI_SHIFT 12 /* bit 15:12 */ - -#define PCIREGOFFS(field) offsetof(struct sbpciregs, field) -#define PCIEREGOFFS(field) offsetof(struct sbpcieregs, field) - -/* Sonics side: PCI core and host control registers */ -struct sbpciregs { - u32 control; /* PCI control */ - u32 PAD[3]; - u32 arbcontrol; /* PCI arbiter control */ - u32 clkrun; /* Clkrun Control (>=rev11) */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status */ - u32 intmask; /* Interrupt mask */ - u32 sbtopcimailbox; /* Sonics to PCI mailbox */ - u32 PAD[9]; - u32 bcastaddr; /* Sonics broadcast address */ - u32 bcastdata; /* Sonics broadcast data */ - u32 PAD[2]; - u32 gpioin; /* ro: gpio input (>=rev2) */ - u32 gpioout; /* rw: gpio output (>=rev2) */ - u32 gpioouten; /* rw: gpio output enable (>= rev2) */ - u32 gpiocontrol; /* rw: gpio control (>= rev2) */ - u32 PAD[36]; - u32 sbtopci0; /* Sonics to PCI translation 0 */ - u32 sbtopci1; /* Sonics to PCI translation 1 */ - u32 sbtopci2; /* Sonics to PCI translation 2 */ - u32 PAD[189]; - u32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ - u16 sprom[36]; /* SPROM shadow Area */ - u32 PAD[46]; -}; - -/* SB side: PCIE core and host control registers */ -struct sbpcieregs { - u32 control; /* host mode only */ - u32 PAD[2]; - u32 biststatus; /* bist Status: 0x00C */ - u32 gpiosel; /* PCIE gpio sel: 0x010 */ - u32 gpioouten; /* PCIE gpio outen: 0x14 */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status: 0x20 */ - u32 intmask; /* Interrupt mask: 0x24 */ - u32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ - u32 PAD[53]; - u32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ - u32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ - u32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ - u32 PAD[5]; - - /* pcie core supports in direct access to config space */ - u32 configaddr; /* pcie config space access: Address field: 0x120 */ - u32 configdata; /* pcie config space access: Data field: 0x124 */ - - /* mdio access to serdes */ - u32 mdiocontrol; /* controls the mdio access: 0x128 */ - u32 mdiodata; /* Data to the mdio access: 0x12c */ - - /* pcie protocol phy/dllp/tlp register indirect access mechanism */ - u32 pcieindaddr; /* indirect access to - * the internal register: 0x130 - */ - u32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */ - - u32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */ - u32 PAD[177]; - u32 pciecfg[4][64]; /* 0x400 - 0x7FF, PCIE Cfg Space */ - u16 sprom[64]; /* SPROM shadow Area */ -}; - -struct pcicore_info { - struct bcma_device *core; - struct si_pub *sih; /* System interconnect handle */ - struct pci_dev *dev; - u8 pciecap_lcreg_offset;/* PCIE capability LCreg offset - * in the config space - */ - bool pcie_pr42767; - u8 pcie_polarity; - u8 pcie_war_aspm_ovr; /* Override ASPM/Clkreq settings */ - - u8 pmecap_offset; /* PM Capability offset in the config space */ - bool pmecap; /* Capable of generating PME */ -}; - -#define PCIE_ASPM(sih) \ - ((ai_get_buscoretype(sih) == PCIE_CORE_ID) && \ - ((ai_get_buscorerev(sih) >= 3) && \ - (ai_get_buscorerev(sih) <= 5))) - - -/* delay needed between the mdio control/ mdiodata register data access */ -static void pr28829_delay(void) -{ - udelay(10); -} - -/* Initialize the PCI core. - * It's caller's responsibility to make sure that this is done only once - */ -struct pcicore_info *pcicore_init(struct si_pub *sih, struct bcma_device *core) -{ - struct pcicore_info *pi; - - /* alloc struct pcicore_info */ - pi = kzalloc(sizeof(struct pcicore_info), GFP_ATOMIC); - if (pi == NULL) - return NULL; - - pi->sih = sih; - pi->dev = core->bus->host_pci; - pi->core = core; - - if (core->id.id == PCIE_CORE_ID) { - u8 cap_ptr; - cap_ptr = pcicore_find_pci_capability(pi->dev, PCI_CAP_ID_EXP, - NULL, NULL); - pi->pciecap_lcreg_offset = cap_ptr + PCIE_CAP_LINKCTRL_OFFSET; - } - return pi; -} - -void pcicore_deinit(struct pcicore_info *pch) -{ - kfree(pch); -} - -/* return cap_offset if requested capability exists in the PCI config space */ -/* Note that it's caller's responsibility to make sure it's a pci bus */ -u8 -pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, - unsigned char *buf, u32 *buflen) -{ - u8 cap_id; - u8 cap_ptr = 0; - u32 bufsize; - u8 byte_val; - - /* check for Header type 0 */ - pci_read_config_byte(dev, PCI_HEADER_TYPE, &byte_val); - if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) - goto end; - - /* check if the capability pointer field exists */ - pci_read_config_byte(dev, PCI_STATUS, &byte_val); - if (!(byte_val & PCI_STATUS_CAP_LIST)) - goto end; - - pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &cap_ptr); - /* check if the capability pointer is 0x00 */ - if (cap_ptr == 0x00) - goto end; - - /* loop thru the capability list - * and see if the pcie capability exists - */ - - pci_read_config_byte(dev, cap_ptr, &cap_id); - - while (cap_id != req_cap_id) { - pci_read_config_byte(dev, cap_ptr + 1, &cap_ptr); - if (cap_ptr == 0x00) - break; - pci_read_config_byte(dev, cap_ptr, &cap_id); - } - if (cap_id != req_cap_id) - goto end; - - /* found the caller requested capability */ - if (buf != NULL && buflen != NULL) { - u8 cap_data; - - bufsize = *buflen; - if (!bufsize) - goto end; - *buflen = 0; - /* copy the capability data excluding cap ID and next ptr */ - cap_data = cap_ptr + 2; - if ((bufsize + cap_data) > PCI_SZPCR) - bufsize = PCI_SZPCR - cap_data; - *buflen = bufsize; - while (bufsize--) { - pci_read_config_byte(dev, cap_data, buf); - cap_data++; - buf++; - } - } -end: - return cap_ptr; -} - -/* ***** Register Access API */ -static uint -pcie_readreg(struct bcma_device *core, uint addrtype, uint offset) -{ - uint retval = 0xFFFFFFFF; - - switch (addrtype) { - case PCIE_CONFIGREGS: - bcma_write32(core, PCIEREGOFFS(configaddr), offset); - (void)bcma_read32(core, PCIEREGOFFS(configaddr)); - retval = bcma_read32(core, PCIEREGOFFS(configdata)); - break; - case PCIE_PCIEREGS: - bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); - (void)bcma_read32(core, PCIEREGOFFS(pcieindaddr)); - retval = bcma_read32(core, PCIEREGOFFS(pcieinddata)); - break; - } - - return retval; -} - -static uint pcie_writereg(struct bcma_device *core, uint addrtype, - uint offset, uint val) -{ - switch (addrtype) { - case PCIE_CONFIGREGS: - bcma_write32(core, PCIEREGOFFS(configaddr), offset); - bcma_write32(core, PCIEREGOFFS(configdata), val); - break; - case PCIE_PCIEREGS: - bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); - bcma_write32(core, PCIEREGOFFS(pcieinddata), val); - break; - default: - break; - } - return 0; -} - -static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk) -{ - uint mdiodata, i = 0; - uint pcie_serdes_spinwait = 200; - - mdiodata = (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | - (MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | - (MDIODATA_BLK_ADDR << MDIODATA_REGADDR_SHF) | - (blk << 4)); - bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); - - pr28829_delay(); - /* retry till the transaction is complete */ - while (i < pcie_serdes_spinwait) { - if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & - MDIOCTL_ACCESS_DONE) - break; - - udelay(1000); - i++; - } - - if (i >= pcie_serdes_spinwait) - return false; - - return true; -} - -static int -pcie_mdioop(struct pcicore_info *pi, uint physmedia, uint regaddr, bool write, - uint *val) -{ - uint mdiodata; - uint i = 0; - uint pcie_serdes_spinwait = 10; - - /* enable mdio access to SERDES */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), - MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); - - if (ai_get_buscorerev(pi->sih) >= 10) { - /* new serdes is slower in rw, - * using two layers of reg address mapping - */ - if (!pcie_mdiosetblock(pi, physmedia)) - return 1; - mdiodata = ((MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | - (regaddr << MDIODATA_REGADDR_SHF)); - pcie_serdes_spinwait *= 20; - } else { - mdiodata = ((physmedia << MDIODATA_DEVADDR_SHF_OLD) | - (regaddr << MDIODATA_REGADDR_SHF_OLD)); - } - - if (!write) - mdiodata |= (MDIODATA_START | MDIODATA_READ | MDIODATA_TA); - else - mdiodata |= (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | - *val); - - bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); - - pr28829_delay(); - - /* retry till the transaction is complete */ - while (i < pcie_serdes_spinwait) { - if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & - MDIOCTL_ACCESS_DONE) { - if (!write) { - pr28829_delay(); - *val = (bcma_read32(pi->core, - PCIEREGOFFS(mdiodata)) & - MDIODATA_MASK); - } - /* Disable mdio access to SERDES */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); - return 0; - } - udelay(1000); - i++; - } - - /* Timed out. Disable mdio access to SERDES. */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); - return 1; -} - -/* use the mdio interface to read from mdio slaves */ -static int -pcie_mdioread(struct pcicore_info *pi, uint physmedia, uint regaddr, - uint *regval) -{ - return pcie_mdioop(pi, physmedia, regaddr, false, regval); -} - -/* use the mdio interface to write to mdio slaves */ -static int -pcie_mdiowrite(struct pcicore_info *pi, uint physmedia, uint regaddr, uint val) -{ - return pcie_mdioop(pi, physmedia, regaddr, true, &val); -} - -/* ***** Support functions ***** */ -static u8 pcie_clkreq(struct pcicore_info *pi, u32 mask, u32 val) -{ - u32 reg_val; - u8 offset; - - offset = pi->pciecap_lcreg_offset; - if (!offset) - return 0; - - pci_read_config_dword(pi->dev, offset, ®_val); - /* set operation */ - if (mask) { - if (val) - reg_val |= PCIE_CLKREQ_ENAB; - else - reg_val &= ~PCIE_CLKREQ_ENAB; - pci_write_config_dword(pi->dev, offset, reg_val); - pci_read_config_dword(pi->dev, offset, ®_val); - } - if (reg_val & PCIE_CLKREQ_ENAB) - return 1; - else - return 0; -} - -static void pcie_extendL1timer(struct pcicore_info *pi, bool extend) -{ - u32 w; - struct si_pub *sih = pi->sih; - - if (ai_get_buscoretype(sih) != PCIE_CORE_ID || - ai_get_buscorerev(sih) < 7) - return; - - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); - if (extend) - w |= PCIE_ASPMTIMER_EXTEND; - else - w &= ~PCIE_ASPMTIMER_EXTEND; - pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w); - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); -} - -/* centralized clkreq control policy */ -static void pcie_clkreq_upd(struct pcicore_info *pi, uint state) -{ - struct si_pub *sih = pi->sih; - - switch (state) { - case SI_DOATTACH: - if (PCIE_ASPM(sih)) - pcie_clkreq(pi, 1, 0); - break; - case SI_PCIDOWN: - /* turn on serdes PLL down */ - if (ai_get_buscorerev(sih) == 6) { - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_addr), - ~0, 0); - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_data), - ~0x40, 0); - } else if (pi->pcie_pr42767) { - pcie_clkreq(pi, 1, 1); - } - break; - case SI_PCIUP: - /* turn off serdes PLL down */ - if (ai_get_buscorerev(sih) == 6) { - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_addr), - ~0, 0); - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_data), - ~0x40, 0x40); - } else if (PCIE_ASPM(sih)) { /* disable clkreq */ - pcie_clkreq(pi, 1, 0); - } - break; - } -} - -/* ***** PCI core WARs ***** */ -/* Done only once at attach time */ -static void pcie_war_polarity(struct pcicore_info *pi) -{ - u32 w; - - if (pi->pcie_polarity != 0) - return; - - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_PLP_STATUSREG); - - /* Detect the current polarity at attach and force that polarity and - * disable changing the polarity - */ - if ((w & PCIE_PLP_POLARITYINV_STAT) == 0) - pi->pcie_polarity = SERDES_RX_CTRL_FORCE; - else - pi->pcie_polarity = (SERDES_RX_CTRL_FORCE | - SERDES_RX_CTRL_POLARITY); -} - -/* enable ASPM and CLKREQ if srom doesn't have it */ -/* Needs to happen when update to shadow SROM is needed - * : Coming out of 'standby'/'hibernate' - * : If pcie_war_aspm_ovr state changed - */ -static void pcie_war_aspm_clkreq(struct pcicore_info *pi) -{ - struct si_pub *sih = pi->sih; - u16 val16; - u32 w; - - if (!PCIE_ASPM(sih)) - return; - - /* bypass this on QT or VSIM */ - val16 = bcma_read16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET])); - - val16 &= ~SRSH_ASPM_ENB; - if (pi->pcie_war_aspm_ovr == PCIE_ASPM_ENAB) - val16 |= SRSH_ASPM_ENB; - else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L1_ENAB) - val16 |= SRSH_ASPM_L1_ENB; - else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L0s_ENAB) - val16 |= SRSH_ASPM_L0s_ENB; - - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET]), val16); - - pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); - w &= ~PCIE_ASPM_ENAB; - w |= pi->pcie_war_aspm_ovr; - pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); - - val16 = bcma_read16(pi->core, - PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5])); - - if (pi->pcie_war_aspm_ovr != PCIE_ASPM_DISAB) { - val16 |= SRSH_CLKREQ_ENB; - pi->pcie_pr42767 = true; - } else - val16 &= ~SRSH_CLKREQ_ENB; - - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5]), - val16); -} - -/* Apply the polarity determined at the start */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_serdes(struct pcicore_info *pi) -{ - u32 w = 0; - - if (pi->pcie_polarity != 0) - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CTRL, - pi->pcie_polarity); - - pcie_mdioread(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, &w); - if (w & PLL_CTRL_FREQDET_EN) { - w &= ~PLL_CTRL_FREQDET_EN; - pcie_mdiowrite(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, w); - } -} - -/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_misc_config_fixup(struct pcicore_info *pi) -{ - u16 val16; - - val16 = bcma_read16(pi->core, - PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG])); - - if ((val16 & SRSH_L23READY_EXIT_NOPERST) == 0) { - val16 |= SRSH_L23READY_EXIT_NOPERST; - bcma_write16(pi->core, - PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG]), val16); - } -} - -/* quick hack for testing */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_noplldown(struct pcicore_info *pi) -{ - /* turn off serdes PLL down */ - ai_cc_reg(pi->sih, offsetof(struct chipcregs, chipcontrol), - CHIPCTRL_4321_PLL_DOWN, CHIPCTRL_4321_PLL_DOWN); - - /* clear srom shadow backdoor */ - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_BD_OFFSET]), 0); -} - -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_pci_setup(struct pcicore_info *pi) -{ - struct si_pub *sih = pi->sih; - u32 w; - - if (ai_get_buscorerev(sih) == 0 || ai_get_buscorerev(sih) == 1) { - w = pcie_readreg(pi->core, PCIE_PCIEREGS, - PCIE_TLP_WORKAROUNDSREG); - w |= 0x8; - pcie_writereg(pi->core, PCIE_PCIEREGS, - PCIE_TLP_WORKAROUNDSREG, w); - } - - if (ai_get_buscorerev(sih) == 1) { - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG); - w |= 0x40; - pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w); - } - - if (ai_get_buscorerev(sih) == 0) { - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128); - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100); - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466); - } else if (PCIE_ASPM(sih)) { - /* Change the L1 threshold for better performance */ - w = pcie_readreg(pi->core, PCIE_PCIEREGS, - PCIE_DLLP_PMTHRESHREG); - w &= ~PCIE_L1THRESHOLDTIME_MASK; - w |= PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT; - pcie_writereg(pi->core, PCIE_PCIEREGS, - PCIE_DLLP_PMTHRESHREG, w); - - pcie_war_serdes(pi); - - pcie_war_aspm_clkreq(pi); - } else if (ai_get_buscorerev(pi->sih) == 7) - pcie_war_noplldown(pi); - - /* Note that the fix is actually in the SROM, - * that's why this is open-ended - */ - if (ai_get_buscorerev(pi->sih) >= 6) - pcie_misc_config_fixup(pi); -} - -/* ***** Functions called during driver state changes ***** */ -void pcicore_attach(struct pcicore_info *pi, int state) -{ - struct si_pub *sih = pi->sih; - u32 bfl2 = (u32)getintvar(sih, BRCMS_SROM_BOARDFLAGS2); - - /* Determine if this board needs override */ - if (PCIE_ASPM(sih)) { - if (bfl2 & BFL2_PCIEWAR_OVR) - pi->pcie_war_aspm_ovr = PCIE_ASPM_DISAB; - else - pi->pcie_war_aspm_ovr = PCIE_ASPM_ENAB; - } - - /* These need to happen in this order only */ - pcie_war_polarity(pi); - - pcie_war_serdes(pi); - - pcie_war_aspm_clkreq(pi); - - pcie_clkreq_upd(pi, state); - -} - -void pcicore_hwup(struct pcicore_info *pi) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - pcie_war_pci_setup(pi); -} - -void pcicore_up(struct pcicore_info *pi, int state) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - /* Restore L1 timer for better performance */ - pcie_extendL1timer(pi, true); - - pcie_clkreq_upd(pi, state); -} - -/* When the device is going to enter D3 state - * (or the system is going to enter S3/S4 states) - */ -void pcicore_sleep(struct pcicore_info *pi) -{ - u32 w; - - if (!pi || !PCIE_ASPM(pi->sih)) - return; - - pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); - w &= ~PCIE_CAP_LCREG_ASPML1; - pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); - - pi->pcie_pr42767 = false; -} - -void pcicore_down(struct pcicore_info *pi, int state) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - pcie_clkreq_upd(pi, state); - - /* Reduce L1 timer for better power savings */ - pcie_extendL1timer(pi, false); -} - -void pcicore_fixcfg(struct pcicore_info *pi) -{ - struct bcma_device *core = pi->core; - u16 val16; - uint regoff; - - switch (pi->core->id.id) { - case BCMA_CORE_PCI: - regoff = PCIREGOFFS(sprom[SRSH_PI_OFFSET]); - break; - - case BCMA_CORE_PCIE: - regoff = PCIEREGOFFS(sprom[SRSH_PI_OFFSET]); - break; - - default: - return; - } - - val16 = bcma_read16(pi->core, regoff); - if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != - (u16)core->core_index) { - val16 = ((u16)core->core_index << SRSH_PI_SHIFT) | - (val16 & ~SRSH_PI_MASK); - bcma_write16(pi->core, regoff, val16); - } -} - -/* precondition: current core is pci core */ -void -pcicore_pci_setup(struct pcicore_info *pi) -{ - bcma_set32(pi->core, PCIREGOFFS(sbtopci2), - SBTOPCI_PREF | SBTOPCI_BURST); - - if (pi->core->id.rev >= 11) { - bcma_set32(pi->core, PCIREGOFFS(sbtopci2), - SBTOPCI_RC_READMULTI); - bcma_set32(pi->core, PCIREGOFFS(clkrun), PCI_CLKRUN_DSBL); - (void)bcma_read32(pi->core, PCIREGOFFS(clkrun)); - } -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h b/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h deleted file mode 100644 index 9fc3ead540a8..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_NICPCI_H_ -#define _BRCM_NICPCI_H_ - -#include "types.h" - -/* PCI configuration address space size */ -#define PCI_SZPCR 256 - -/* Brcm PCI configuration registers */ -/* backplane address space accessed by BAR0 */ -#define PCI_BAR0_WIN 0x80 -/* sprom property control */ -#define PCI_SPROM_CONTROL 0x88 -/* mask of PCI and other cores interrupts */ -#define PCI_INT_MASK 0x94 -/* backplane core interrupt mask bits offset */ -#define PCI_SBIM_SHIFT 8 -/* backplane address space accessed by second 4KB of BAR0 */ -#define PCI_BAR0_WIN2 0xac -/* pci config space gpio input (>=rev3) */ -#define PCI_GPIO_IN 0xb0 -/* pci config space gpio output (>=rev3) */ -#define PCI_GPIO_OUT 0xb4 -/* pci config space gpio output enable (>=rev3) */ -#define PCI_GPIO_OUTEN 0xb8 - -/* bar0 + 4K accesses external sprom */ -#define PCI_BAR0_SPROM_OFFSET (4 * 1024) -/* bar0 + 6K accesses pci core registers */ -#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) -/* - * pci core SB registers are at the end of the - * 8KB window, so their address is the "regular" - * address plus 4K - */ -#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) -/* bar0 window size Match with corerev 13 */ -#define PCI_BAR0_WINSZ (16 * 1024) -/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ -/* bar0 + 8K accesses pci/pcie core registers */ -#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) -/* bar0 + 12K accesses chipc core registers */ -#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) - -struct sbpciregs; -struct sbpcieregs; - -extern struct pcicore_info *pcicore_init(struct si_pub *sih, - struct bcma_device *core); -extern void pcicore_deinit(struct pcicore_info *pch); -extern void pcicore_attach(struct pcicore_info *pch, int state); -extern void pcicore_hwup(struct pcicore_info *pch); -extern void pcicore_up(struct pcicore_info *pch, int state); -extern void pcicore_sleep(struct pcicore_info *pch); -extern void pcicore_down(struct pcicore_info *pch, int state); -extern u8 pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, - unsigned char *buf, u32 *buflen); -extern void pcicore_fixcfg(struct pcicore_info *pch); -extern void pcicore_pci_setup(struct pcicore_info *pch); - -#endif /* _BRCM_NICPCI_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/otp.c b/drivers/net/wireless/brcm80211/brcmsmac/otp.c deleted file mode 100644 index f1ca12625860..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/otp.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/string.h> - -#include <brcm_hw_ids.h> -#include <chipcommon.h> -#include "aiutils.h" -#include "otp.h" - -#define OTPS_GUP_MASK 0x00000f00 -#define OTPS_GUP_SHIFT 8 -/* h/w subregion is programmed */ -#define OTPS_GUP_HW 0x00000100 -/* s/w subregion is programmed */ -#define OTPS_GUP_SW 0x00000200 -/* chipid/pkgopt subregion is programmed */ -#define OTPS_GUP_CI 0x00000400 -/* fuse subregion is programmed */ -#define OTPS_GUP_FUSE 0x00000800 - -/* Fields in otpprog in rev >= 21 */ -#define OTPP_COL_MASK 0x000000ff -#define OTPP_COL_SHIFT 0 -#define OTPP_ROW_MASK 0x0000ff00 -#define OTPP_ROW_SHIFT 8 -#define OTPP_OC_MASK 0x0f000000 -#define OTPP_OC_SHIFT 24 -#define OTPP_READERR 0x10000000 -#define OTPP_VALUE_MASK 0x20000000 -#define OTPP_VALUE_SHIFT 29 -#define OTPP_START_BUSY 0x80000000 -#define OTPP_READ 0x40000000 - -/* Opcodes for OTPP_OC field */ -#define OTPPOC_READ 0 -#define OTPPOC_BIT_PROG 1 -#define OTPPOC_VERIFY 3 -#define OTPPOC_INIT 4 -#define OTPPOC_SET 5 -#define OTPPOC_RESET 6 -#define OTPPOC_OCST 7 -#define OTPPOC_ROW_LOCK 8 -#define OTPPOC_PRESCN_TEST 9 - -#define OTPTYPE_IPX(ccrev) ((ccrev) == 21 || (ccrev) >= 23) - -#define OTPP_TRIES 10000000 /* # of tries for OTPP */ - -#define MAXNUMRDES 9 /* Maximum OTP redundancy entries */ - -/* Fixed size subregions sizes in words */ -#define OTPGU_CI_SZ 2 - -struct otpinfo; - -/* OTP function struct */ -struct otp_fn_s { - int (*init)(struct si_pub *sih, struct otpinfo *oi); - int (*read_region)(struct otpinfo *oi, int region, u16 *data, - uint *wlen); -}; - -struct otpinfo { - struct bcma_device *core; /* chipc core */ - const struct otp_fn_s *fn; /* OTP functions */ - struct si_pub *sih; /* Saved sb handle */ - - /* IPX OTP section */ - u16 wsize; /* Size of otp in words */ - u16 rows; /* Geometry */ - u16 cols; /* Geometry */ - u32 status; /* Flag bits (lock/prog/rv). - * (Reflected only when OTP is power cycled) - */ - u16 hwbase; /* hardware subregion offset */ - u16 hwlim; /* hardware subregion boundary */ - u16 swbase; /* software subregion offset */ - u16 swlim; /* software subregion boundary */ - u16 fbase; /* fuse subregion offset */ - u16 flim; /* fuse subregion boundary */ - int otpgu_base; /* offset to General Use Region */ -}; - -/* OTP layout */ -/* CC revs 21, 24 and 27 OTP General Use Region word offset */ -#define REVA4_OTPGU_BASE 12 - -/* CC revs 23, 25, 26, 28 and above OTP General Use Region word offset */ -#define REVB8_OTPGU_BASE 20 - -/* CC rev 36 OTP General Use Region word offset */ -#define REV36_OTPGU_BASE 12 - -/* Subregion word offsets in General Use region */ -#define OTPGU_HSB_OFF 0 -#define OTPGU_SFB_OFF 1 -#define OTPGU_CI_OFF 2 -#define OTPGU_P_OFF 3 -#define OTPGU_SROM_OFF 4 - -/* Flag bit offsets in General Use region */ -#define OTPGU_HWP_OFF 60 -#define OTPGU_SWP_OFF 61 -#define OTPGU_CIP_OFF 62 -#define OTPGU_FUSEP_OFF 63 -#define OTPGU_CIP_MSK 0x4000 -#define OTPGU_P_MSK 0xf000 -#define OTPGU_P_SHIFT (OTPGU_HWP_OFF % 16) - -/* OTP Size */ -#define OTP_SZ_FU_324 ((roundup(324, 8))/8) /* 324 bits */ -#define OTP_SZ_FU_288 (288/8) /* 288 bits */ -#define OTP_SZ_FU_216 (216/8) /* 216 bits */ -#define OTP_SZ_FU_72 (72/8) /* 72 bits */ -#define OTP_SZ_CHECKSUM (16/8) /* 16 bits */ -#define OTP4315_SWREG_SZ 178 /* 178 bytes */ -#define OTP_SZ_FU_144 (144/8) /* 144 bits */ - -static u16 -ipxotp_otpr(struct otpinfo *oi, uint wn) -{ - return bcma_read16(oi->core, - CHIPCREGOFFS(sromotp[wn])); -} - -/* - * Calculate max HW/SW region byte size by subtracting fuse region - * and checksum size, osizew is oi->wsize (OTP size - GU size) in words - */ -static int ipxotp_max_rgnsz(struct si_pub *sih, int osizew) -{ - int ret = 0; - - switch (ai_get_chip_id(sih)) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; - break; - case BCM4313_CHIP_ID: - ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; - break; - default: - break; /* Don't know about this chip */ - } - - return ret; -} - -static void _ipxotp_init(struct otpinfo *oi) -{ - uint k; - u32 otpp, st; - int ccrev = ai_get_ccrev(oi->sih); - - - /* - * record word offset of General Use Region - * for various chipcommon revs - */ - if (ccrev == 21 || ccrev == 24 - || ccrev == 27) { - oi->otpgu_base = REVA4_OTPGU_BASE; - } else if (ccrev == 36) { - /* - * OTP size greater than equal to 2KB (128 words), - * otpgu_base is similar to rev23 - */ - if (oi->wsize >= 128) - oi->otpgu_base = REVB8_OTPGU_BASE; - else - oi->otpgu_base = REV36_OTPGU_BASE; - } else if (ccrev == 23 || ccrev >= 25) { - oi->otpgu_base = REVB8_OTPGU_BASE; - } - - /* First issue an init command so the status is up to date */ - otpp = - OTPP_START_BUSY | ((OTPPOC_INIT << OTPP_OC_SHIFT) & OTPP_OC_MASK); - - bcma_write32(oi->core, CHIPCREGOFFS(otpprog), otpp); - st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); - for (k = 0; (st & OTPP_START_BUSY) && (k < OTPP_TRIES); k++) - st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); - if (k >= OTPP_TRIES) - return; - - /* Read OTP lock bits and subregion programmed indication bits */ - oi->status = bcma_read32(oi->core, CHIPCREGOFFS(otpstatus)); - - if ((ai_get_chip_id(oi->sih) == BCM43224_CHIP_ID) - || (ai_get_chip_id(oi->sih) == BCM43225_CHIP_ID)) { - u32 p_bits; - p_bits = (ipxotp_otpr(oi, oi->otpgu_base + OTPGU_P_OFF) & - OTPGU_P_MSK) >> OTPGU_P_SHIFT; - oi->status |= (p_bits << OTPS_GUP_SHIFT); - } - - /* - * h/w region base and fuse region limit are fixed to - * the top and the bottom of the general use region. - * Everything else can be flexible. - */ - oi->hwbase = oi->otpgu_base + OTPGU_SROM_OFF; - oi->hwlim = oi->wsize; - if (oi->status & OTPS_GUP_HW) { - oi->hwlim = - ipxotp_otpr(oi, oi->otpgu_base + OTPGU_HSB_OFF) / 16; - oi->swbase = oi->hwlim; - } else - oi->swbase = oi->hwbase; - - /* subtract fuse and checksum from beginning */ - oi->swlim = ipxotp_max_rgnsz(oi->sih, oi->wsize) / 2; - - if (oi->status & OTPS_GUP_SW) { - oi->swlim = - ipxotp_otpr(oi, oi->otpgu_base + OTPGU_SFB_OFF) / 16; - oi->fbase = oi->swlim; - } else - oi->fbase = oi->swbase; - - oi->flim = oi->wsize; -} - -static int ipxotp_init(struct si_pub *sih, struct otpinfo *oi) -{ - /* Make sure we're running IPX OTP */ - if (!OTPTYPE_IPX(ai_get_ccrev(sih))) - return -EBADE; - - /* Make sure OTP is not disabled */ - if (ai_is_otp_disabled(sih)) - return -EBADE; - - /* Check for otp size */ - switch ((ai_get_cccaps(sih) & CC_CAP_OTPSIZE) >> CC_CAP_OTPSIZE_SHIFT) { - case 0: - /* Nothing there */ - return -EBADE; - case 1: /* 32x64 */ - oi->rows = 32; - oi->cols = 64; - oi->wsize = 128; - break; - case 2: /* 64x64 */ - oi->rows = 64; - oi->cols = 64; - oi->wsize = 256; - break; - case 5: /* 96x64 */ - oi->rows = 96; - oi->cols = 64; - oi->wsize = 384; - break; - case 7: /* 16x64 *//* 1024 bits */ - oi->rows = 16; - oi->cols = 64; - oi->wsize = 64; - break; - default: - /* Don't know the geometry */ - return -EBADE; - } - - /* Retrieve OTP region info */ - _ipxotp_init(oi); - return 0; -} - -static int -ipxotp_read_region(struct otpinfo *oi, int region, u16 *data, uint *wlen) -{ - uint base, i, sz; - - /* Validate region selection */ - switch (region) { - case OTP_HW_RGN: - sz = (uint) oi->hwlim - oi->hwbase; - if (!(oi->status & OTPS_GUP_HW)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->hwbase; - break; - case OTP_SW_RGN: - sz = ((uint) oi->swlim - oi->swbase); - if (!(oi->status & OTPS_GUP_SW)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->swbase; - break; - case OTP_CI_RGN: - sz = OTPGU_CI_SZ; - if (!(oi->status & OTPS_GUP_CI)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->otpgu_base + OTPGU_CI_OFF; - break; - case OTP_FUSE_RGN: - sz = (uint) oi->flim - oi->fbase; - if (!(oi->status & OTPS_GUP_FUSE)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->fbase; - break; - case OTP_ALL_RGN: - sz = ((uint) oi->flim - oi->hwbase); - if (!(oi->status & (OTPS_GUP_HW | OTPS_GUP_SW))) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->hwbase; - break; - default: - return -EINVAL; - } - - /* Read the data */ - for (i = 0; i < sz; i++) - data[i] = ipxotp_otpr(oi, base + i); - - *wlen = sz; - return 0; -} - -static const struct otp_fn_s ipxotp_fn = { - (int (*)(struct si_pub *, struct otpinfo *)) ipxotp_init, - (int (*)(struct otpinfo *, int, u16 *, uint *)) ipxotp_read_region, -}; - -static int otp_init(struct si_pub *sih, struct otpinfo *oi) -{ - int ret; - - memset(oi, 0, sizeof(struct otpinfo)); - - oi->core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - - if (OTPTYPE_IPX(ai_get_ccrev(sih))) - oi->fn = &ipxotp_fn; - - if (oi->fn == NULL) - return -EBADE; - - oi->sih = sih; - - ret = (oi->fn->init)(sih, oi); - - return ret; -} - -int -otp_read_region(struct si_pub *sih, int region, u16 *data, uint *wlen) { - struct otpinfo otpinfo; - struct otpinfo *oi = &otpinfo; - int err = 0; - - if (ai_is_otp_disabled(sih)) { - err = -EPERM; - goto out; - } - - err = otp_init(sih, oi); - if (err) - goto out; - - err = ((oi)->fn->read_region)(oi, region, data, wlen); - - out: - return err; -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/otp.h b/drivers/net/wireless/brcm80211/brcmsmac/otp.h deleted file mode 100644 index 6b6d31cf9569..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/otp.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_OTP_H_ -#define _BRCM_OTP_H_ - -#include "types.h" - -/* OTP regions */ -#define OTP_HW_RGN 1 -#define OTP_SW_RGN 2 -#define OTP_CI_RGN 4 -#define OTP_FUSE_RGN 8 -/* From h/w region to end of OTP including checksum */ -#define OTP_ALL_RGN 0xf - -/* OTP Size */ -#define OTP_SZ_MAX (6144/8) /* maximum bytes in one CIS */ - -extern int otp_read_region(struct si_pub *sih, int region, u16 *data, - uint *wlen); - -#endif /* _BRCM_OTP_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 0fce56235f38..abfd78822fb8 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -4817,28 +4817,23 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) s8 txpwr = 0; int i; struct brcms_phy_lcnphy *pi_lcn = pi->u.pi_lcnphy; - struct phy_shim_info *shim = pi->sh->physhim; + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; if (CHSPEC_IS2G(pi->radio_chanspec)) { u16 cckpo = 0; u32 offset_ofdm, offset_mcs; - pi_lcn->lcnphy_tr_isolation_mid = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); + pi_lcn->lcnphy_tr_isolation_mid = sprom->fem.ghz2.tr_iso; - pi_lcn->lcnphy_rx_power_offset = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RXPO2G); + pi_lcn->lcnphy_rx_power_offset = sprom->rxpo2g; - pi->txpa_2g[0] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B0); - pi->txpa_2g[1] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B1); - pi->txpa_2g[2] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B2); + pi->txpa_2g[0] = sprom->pa0b0; + pi->txpa_2g[1] = sprom->pa0b1; + pi->txpa_2g[2] = sprom->pa0b2; - pi_lcn->lcnphy_rssi_vf = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMF2G); - pi_lcn->lcnphy_rssi_vc = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMC2G); - pi_lcn->lcnphy_rssi_gs = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISAV2G); + pi_lcn->lcnphy_rssi_vf = sprom->rssismf2g; + pi_lcn->lcnphy_rssi_vc = sprom->rssismc2g; + pi_lcn->lcnphy_rssi_gs = sprom->rssisav2g; pi_lcn->lcnphy_rssi_vf_lowtemp = pi_lcn->lcnphy_rssi_vf; pi_lcn->lcnphy_rssi_vc_lowtemp = pi_lcn->lcnphy_rssi_vc; @@ -4848,7 +4843,7 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) pi_lcn->lcnphy_rssi_vc_hightemp = pi_lcn->lcnphy_rssi_vc; pi_lcn->lcnphy_rssi_gs_hightemp = pi_lcn->lcnphy_rssi_gs; - txpwr = (s8)wlapi_getintvar(shim, BRCMS_SROM_MAXP2GA0); + txpwr = sprom->core_pwr_info[0].maxpwr_2g; pi->tx_srom_max_2g = txpwr; for (i = 0; i < PWRTBL_NUM_COEFF; i++) { @@ -4856,8 +4851,8 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) pi->txpa_2g_high_temp[i] = pi->txpa_2g[i]; } - cckpo = (u16)wlapi_getintvar(shim, BRCMS_SROM_CCK2GPO); - offset_ofdm = (u32)wlapi_getintvar(shim, BRCMS_SROM_OFDM2GPO); + cckpo = sprom->cck2gpo; + offset_ofdm = sprom->ofdm2gpo; if (cckpo) { uint max_pwr_chan = txpwr; @@ -4876,7 +4871,7 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) } else { u8 opo = 0; - opo = (u8)wlapi_getintvar(shim, BRCMS_SROM_OPO); + opo = sprom->opo; for (i = TXP_FIRST_CCK; i <= TXP_LAST_CCK; i++) pi->tx_srom_max_rate_2g[i] = txpwr; @@ -4886,12 +4881,8 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) ((offset_ofdm & 0xf) * 2); offset_ofdm >>= 4; } - offset_mcs = - wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO1) << 16; - offset_mcs |= - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO0); + offset_mcs = sprom->mcs2gpo[1] << 16; + offset_mcs |= sprom->mcs2gpo[0]; pi_lcn->lcnphy_mcs20_po = offset_mcs; for (i = TXP_FIRST_SISO_MCS_20; i <= TXP_LAST_SISO_MCS_20; i++) { @@ -4901,25 +4892,17 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) } } - pi_lcn->lcnphy_rawtempsense = - (u16)wlapi_getintvar(shim, BRCMS_SROM_RAWTEMPSENSE); - pi_lcn->lcnphy_measPower = - (u8)wlapi_getintvar(shim, BRCMS_SROM_MEASPOWER); - pi_lcn->lcnphy_tempsense_slope = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_SLOPE); - pi_lcn->lcnphy_hw_iqcal_en = - (bool)wlapi_getintvar(shim, BRCMS_SROM_HW_IQCAL_EN); - pi_lcn->lcnphy_iqcal_swp_dis = - (bool)wlapi_getintvar(shim, BRCMS_SROM_IQCAL_SWP_DIS); - pi_lcn->lcnphy_tempcorrx = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPCORRX); - pi_lcn->lcnphy_tempsense_option = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_OPTION); - pi_lcn->lcnphy_freqoffset_corr = - (u8)wlapi_getintvar(shim, BRCMS_SROM_FREQOFFSET_CORR); - if ((u8)wlapi_getintvar(shim, BRCMS_SROM_AA2G) > 1) + pi_lcn->lcnphy_rawtempsense = sprom->rawtempsense; + pi_lcn->lcnphy_measPower = sprom->measpower; + pi_lcn->lcnphy_tempsense_slope = sprom->tempsense_slope; + pi_lcn->lcnphy_hw_iqcal_en = sprom->hw_iqcal_en; + pi_lcn->lcnphy_iqcal_swp_dis = sprom->iqcal_swp_dis; + pi_lcn->lcnphy_tempcorrx = sprom->tempcorrx; + pi_lcn->lcnphy_tempsense_option = sprom->tempsense_option; + pi_lcn->lcnphy_freqoffset_corr = sprom->freqoffset_corr; + if (sprom->ant_available_bg > 1) wlc_phy_ant_rxdiv_set((struct brcms_phy_pub *) pi, - (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G)); + sprom->ant_available_bg); } pi_lcn->lcnphy_cck_dig_filt_type = -1; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c index 812b6e38526e..13b261517cce 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c @@ -14386,30 +14386,30 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) { u16 bw40po, cddpo, stbcpo, bwduppo; uint band_num; - struct phy_shim_info *shim = pi->sh->physhim; + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; if (pi->sh->sromrev >= 9) return; - bw40po = (u16) wlapi_getintvar(shim, BRCMS_SROM_BW40PO); + bw40po = sprom->bw40po; pi->bw402gpo = bw40po & 0xf; pi->bw405gpo = (bw40po & 0xf0) >> 4; pi->bw405glpo = (bw40po & 0xf00) >> 8; pi->bw405ghpo = (bw40po & 0xf000) >> 12; - cddpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_CDDPO); + cddpo = sprom->cddpo; pi->cdd2gpo = cddpo & 0xf; pi->cdd5gpo = (cddpo & 0xf0) >> 4; pi->cdd5glpo = (cddpo & 0xf00) >> 8; pi->cdd5ghpo = (cddpo & 0xf000) >> 12; - stbcpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_STBCPO); + stbcpo = sprom->stbcpo; pi->stbc2gpo = stbcpo & 0xf; pi->stbc5gpo = (stbcpo & 0xf0) >> 4; pi->stbc5glpo = (stbcpo & 0xf00) >> 8; pi->stbc5ghpo = (stbcpo & 0xf000) >> 12; - bwduppo = (u16) wlapi_getintvar(shim, BRCMS_SROM_BWDUPPO); + bwduppo = sprom->bwduppo; pi->bwdup2gpo = bwduppo & 0xf; pi->bwdup5gpo = (bwduppo & 0xf0) >> 4; pi->bwdup5glpo = (bwduppo & 0xf00) >> 8; @@ -14419,242 +14419,137 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) band_num++) { switch (band_num) { case 0: - pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_2g = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP2GA0); + sprom->core_pwr_info[0].maxpwr_2g; pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_2g = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP2GA1); + sprom->core_pwr_info[1].maxpwr_2g; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW0A0); + sprom->core_pwr_info[0].pa_2g[0]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW0A1); + sprom->core_pwr_info[1].pa_2g[0]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW1A0); + sprom->core_pwr_info[0].pa_2g[1]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW1A1); + sprom->core_pwr_info[1].pa_2g[1]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW2A0); + sprom->core_pwr_info[0].pa_2g[2]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW2A1); + sprom->core_pwr_info[1].pa_2g[2]; pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_2g = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA0); + sprom->core_pwr_info[0].itssi_2g; pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_2g = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA1); - - pi->cck2gpo = (u16) wlapi_getintvar(shim, - BRCMS_SROM_CCK2GPO); - - pi->ofdm2gpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM2GPO); - - pi->mcs2gpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO0); - pi->mcs2gpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO1); - pi->mcs2gpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO2); - pi->mcs2gpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO3); - pi->mcs2gpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO4); - pi->mcs2gpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO5); - pi->mcs2gpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO6); - pi->mcs2gpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO7); + sprom->core_pwr_info[1].itssi_2g; + + pi->cck2gpo = sprom->cck2gpo; + + pi->ofdm2gpo = sprom->ofdm2gpo; + + pi->mcs2gpo[0] = sprom->mcs2gpo[0]; + pi->mcs2gpo[1] = sprom->mcs2gpo[1]; + pi->mcs2gpo[2] = sprom->mcs2gpo[2]; + pi->mcs2gpo[3] = sprom->mcs2gpo[3]; + pi->mcs2gpo[4] = sprom->mcs2gpo[4]; + pi->mcs2gpo[5] = sprom->mcs2gpo[5]; + pi->mcs2gpo[6] = sprom->mcs2gpo[6]; + pi->mcs2gpo[7] = sprom->mcs2gpo[7]; break; case 1: pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_MAXP5GA0); + sprom->core_pwr_info[0].maxpwr_5g; pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_5gm = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GA1); + sprom->core_pwr_info[1].maxpwr_5g; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW0A0); + sprom->core_pwr_info[0].pa_5g[0]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW0A1); + sprom->core_pwr_info[1].pa_5g[0]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW1A0); + sprom->core_pwr_info[0].pa_5g[1]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW1A1); + sprom->core_pwr_info[1].pa_5g[1]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW2A0); + sprom->core_pwr_info[0].pa_5g[2]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW2A1); + sprom->core_pwr_info[1].pa_5g[2]; pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA0); + sprom->core_pwr_info[0].itssi_5g; pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA1); - - pi->ofdm5gpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GPO); - - pi->mcs5gpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO0); - pi->mcs5gpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO1); - pi->mcs5gpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO2); - pi->mcs5gpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO3); - pi->mcs5gpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO4); - pi->mcs5gpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO5); - pi->mcs5gpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO6); - pi->mcs5gpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO7); + sprom->core_pwr_info[1].itssi_5g; + + pi->ofdm5gpo = sprom->ofdm5gpo; + + pi->mcs5gpo[0] = sprom->mcs5gpo[0]; + pi->mcs5gpo[1] = sprom->mcs5gpo[1]; + pi->mcs5gpo[2] = sprom->mcs5gpo[2]; + pi->mcs5gpo[3] = sprom->mcs5gpo[3]; + pi->mcs5gpo[4] = sprom->mcs5gpo[4]; + pi->mcs5gpo[5] = sprom->mcs5gpo[5]; + pi->mcs5gpo[6] = sprom->mcs5gpo[6]; + pi->mcs5gpo[7] = sprom->mcs5gpo[7]; break; case 2: pi->nphy_pwrctrl_info[0].max_pwr_5gl = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GLA0); + sprom->core_pwr_info[0].maxpwr_5gl; pi->nphy_pwrctrl_info[1].max_pwr_5gl = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GLA1); + sprom->core_pwr_info[1].maxpwr_5gl; pi->nphy_pwrctrl_info[0].pwrdet_5gl_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW0A0); + sprom->core_pwr_info[0].pa_5gl[0]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW0A1); + sprom->core_pwr_info[1].pa_5gl[0]; pi->nphy_pwrctrl_info[0].pwrdet_5gl_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW1A0); + sprom->core_pwr_info[0].pa_5gl[1]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW1A1); + sprom->core_pwr_info[1].pa_5gl[1]; pi->nphy_pwrctrl_info[0].pwrdet_5gl_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW2A0); + sprom->core_pwr_info[0].pa_5gl[2]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW2A1); + sprom->core_pwr_info[1].pa_5gl[2]; pi->nphy_pwrctrl_info[0].idle_targ_5gl = 0; pi->nphy_pwrctrl_info[1].idle_targ_5gl = 0; - pi->ofdm5glpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GLPO); - - pi->mcs5glpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO0); - pi->mcs5glpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO1); - pi->mcs5glpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO2); - pi->mcs5glpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO3); - pi->mcs5glpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO4); - pi->mcs5glpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO5); - pi->mcs5glpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO6); - pi->mcs5glpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO7); + pi->ofdm5glpo = sprom->ofdm5glpo; + + pi->mcs5glpo[0] = sprom->mcs5glpo[0]; + pi->mcs5glpo[1] = sprom->mcs5glpo[1]; + pi->mcs5glpo[2] = sprom->mcs5glpo[2]; + pi->mcs5glpo[3] = sprom->mcs5glpo[3]; + pi->mcs5glpo[4] = sprom->mcs5glpo[4]; + pi->mcs5glpo[5] = sprom->mcs5glpo[5]; + pi->mcs5glpo[6] = sprom->mcs5glpo[6]; + pi->mcs5glpo[7] = sprom->mcs5glpo[7]; break; case 3: pi->nphy_pwrctrl_info[0].max_pwr_5gh = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GHA0); + sprom->core_pwr_info[0].maxpwr_5gh; pi->nphy_pwrctrl_info[1].max_pwr_5gh = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GHA1); + sprom->core_pwr_info[1].maxpwr_5gh; pi->nphy_pwrctrl_info[0].pwrdet_5gh_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW0A0); + sprom->core_pwr_info[0].pa_5gh[0]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW0A1); + sprom->core_pwr_info[1].pa_5gh[0]; pi->nphy_pwrctrl_info[0].pwrdet_5gh_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW1A0); + sprom->core_pwr_info[0].pa_5gh[1]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW1A1); + sprom->core_pwr_info[1].pa_5gh[1]; pi->nphy_pwrctrl_info[0].pwrdet_5gh_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW2A0); + sprom->core_pwr_info[0].pa_5gh[2]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW2A1); + sprom->core_pwr_info[1].pa_5gh[2]; pi->nphy_pwrctrl_info[0].idle_targ_5gh = 0; pi->nphy_pwrctrl_info[1].idle_targ_5gh = 0; - pi->ofdm5ghpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GHPO); - - pi->mcs5ghpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO0); - pi->mcs5ghpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO1); - pi->mcs5ghpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO2); - pi->mcs5ghpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO3); - pi->mcs5ghpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO4); - pi->mcs5ghpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO5); - pi->mcs5ghpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO6); - pi->mcs5ghpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO7); + pi->ofdm5ghpo = sprom->ofdm5ghpo; + + pi->mcs5ghpo[0] = sprom->mcs5ghpo[0]; + pi->mcs5ghpo[1] = sprom->mcs5ghpo[1]; + pi->mcs5ghpo[2] = sprom->mcs5ghpo[2]; + pi->mcs5ghpo[3] = sprom->mcs5ghpo[3]; + pi->mcs5ghpo[4] = sprom->mcs5ghpo[4]; + pi->mcs5ghpo[5] = sprom->mcs5ghpo[5]; + pi->mcs5ghpo[6] = sprom->mcs5ghpo[6]; + pi->mcs5ghpo[7] = sprom->mcs5ghpo[7]; break; } } @@ -14664,45 +14559,34 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) static bool wlc_phy_txpwr_srom_read_nphy(struct brcms_phy *pi) { - struct phy_shim_info *shim = pi->sh->physhim; - - pi->antswitch = (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWITCH); - pi->aa2g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G); - pi->aa5g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA5G); - - pi->srom_fem2g.tssipos = (u8) wlapi_getintvar(shim, - BRCMS_SROM_TSSIPOS2G); - pi->srom_fem2g.extpagain = (u8) wlapi_getintvar(shim, - BRCMS_SROM_EXTPAGAIN2G); - pi->srom_fem2g.pdetrange = (u8) wlapi_getintvar(shim, - BRCMS_SROM_PDETRANGE2G); - pi->srom_fem2g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); - pi->srom_fem2g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); - - pi->srom_fem5g.tssipos = (u8) wlapi_getintvar(shim, - BRCMS_SROM_TSSIPOS5G); - pi->srom_fem5g.extpagain = (u8) wlapi_getintvar(shim, - BRCMS_SROM_EXTPAGAIN5G); - pi->srom_fem5g.pdetrange = (u8) wlapi_getintvar(shim, - BRCMS_SROM_PDETRANGE5G); - pi->srom_fem5g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO5G); - if (wlapi_getvar(shim, BRCMS_SROM_ANTSWCTL5G)) - pi->srom_fem5g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL5G); + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; + + pi->antswitch = sprom->antswitch; + pi->aa2g = sprom->ant_available_bg; + pi->aa5g = sprom->ant_available_a; + + pi->srom_fem2g.tssipos = sprom->fem.ghz2.tssipos; + pi->srom_fem2g.extpagain = sprom->fem.ghz2.extpa_gain; + pi->srom_fem2g.pdetrange = sprom->fem.ghz2.pdet_range; + pi->srom_fem2g.triso = sprom->fem.ghz2.tr_iso; + pi->srom_fem2g.antswctrllut = sprom->fem.ghz2.antswlut; + + pi->srom_fem5g.tssipos = sprom->fem.ghz5.tssipos; + pi->srom_fem5g.extpagain = sprom->fem.ghz5.extpa_gain; + pi->srom_fem5g.pdetrange = sprom->fem.ghz5.pdet_range; + pi->srom_fem5g.triso = sprom->fem.ghz5.tr_iso; + if (sprom->fem.ghz5.antswlut) + pi->srom_fem5g.antswctrllut = sprom->fem.ghz5.antswlut; else - pi->srom_fem5g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); + pi->srom_fem5g.antswctrllut = sprom->fem.ghz2.antswlut; wlc_phy_txpower_ipa_upd(pi); - pi->phy_txcore_disable_temp = - (s16) wlapi_getintvar(shim, BRCMS_SROM_TEMPTHRESH); + pi->phy_txcore_disable_temp = sprom->tempthresh; if (pi->phy_txcore_disable_temp == 0) pi->phy_txcore_disable_temp = PHY_CHAIN_TX_DISABLE_TEMP; - pi->phy_tempsense_offset = (s8) wlapi_getintvar(shim, - BRCMS_SROM_TEMPOFFSET); + pi->phy_tempsense_offset = sprom->tempoffset; if (pi->phy_tempsense_offset != 0) { if (pi->phy_tempsense_offset > (NPHY_SROM_TEMPSHIFT + NPHY_SROM_MAXTEMPOFFSET)) @@ -14717,8 +14601,7 @@ static bool wlc_phy_txpwr_srom_read_nphy(struct brcms_phy *pi) pi->phy_txcore_enable_temp = pi->phy_txcore_disable_temp - PHY_HYSTERESIS_DELTATEMP; - pi->phycal_tempdelta = - (u8) wlapi_getintvar(shim, BRCMS_SROM_PHYCAL_TEMPDELTA); + pi->phycal_tempdelta = sprom->phycal_tempdelta; if (pi->phycal_tempdelta > NPHY_CAL_MAXTEMPDELTA) pi->phycal_tempdelta = 0; @@ -21460,7 +21343,7 @@ void wlc_phy_antsel_init(struct brcms_phy_pub *ppi, bool lut_init) write_phy_reg(pi, 0xc8, 0x0); write_phy_reg(pi, 0xc9, 0x0); - ai_gpiocontrol(pi->sh->sih, mask, mask, GPIO_DRV_PRIORITY); + bcma_chipco_gpio_control(&pi->d11core->bus->drv_cc, mask, mask); mc = bcma_read32(pi->d11core, D11REGOFFS(maccontrol)); mc &= ~MCTL_GPOUT_SEL_MASK; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c index 5926854f62e2..a0de5db0cd64 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c @@ -214,12 +214,3 @@ wlapi_copyto_objmem(struct phy_shim_info *physhim, uint offset, const void *buf, { brcms_b_copyto_objmem(physhim->wlc_hw, offset, buf, l, sel); } - -char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id) -{ - return getvar(physhim->wlc_hw->sih, id); -} -int wlapi_getintvar(struct phy_shim_info *physhim, enum brcms_srom_id id) -{ - return getintvar(physhim->wlc_hw->sih, id); -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h index 9168c459b185..2c5b66b75970 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h @@ -175,8 +175,5 @@ extern void wlapi_copyto_objmem(struct phy_shim_info *physhim, uint, extern void wlapi_high_update_phy_mode(struct phy_shim_info *physhim, u32 phy_mode); extern u16 wlapi_bmac_get_txant(struct phy_shim_info *physhim); -extern char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id); -extern int wlapi_getintvar(struct phy_shim_info *physhim, - enum brcms_srom_id id); #endif /* _BRCM_PHY_SHIM_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h index f0038ad7d7bf..aa5d67f8d874 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h @@ -22,232 +22,6 @@ #include "types.h" #include "defs.h" -enum brcms_srom_id { - BRCMS_SROM_NULL, - BRCMS_SROM_CONT, - BRCMS_SROM_AA2G, - BRCMS_SROM_AA5G, - BRCMS_SROM_AG0, - BRCMS_SROM_AG1, - BRCMS_SROM_AG2, - BRCMS_SROM_AG3, - BRCMS_SROM_ANTSWCTL2G, - BRCMS_SROM_ANTSWCTL5G, - BRCMS_SROM_ANTSWITCH, - BRCMS_SROM_BOARDFLAGS2, - BRCMS_SROM_BOARDFLAGS, - BRCMS_SROM_BOARDNUM, - BRCMS_SROM_BOARDREV, - BRCMS_SROM_BOARDTYPE, - BRCMS_SROM_BW40PO, - BRCMS_SROM_BWDUPPO, - BRCMS_SROM_BXA2G, - BRCMS_SROM_BXA5G, - BRCMS_SROM_CC, - BRCMS_SROM_CCK2GPO, - BRCMS_SROM_CCKBW202GPO, - BRCMS_SROM_CCKBW20UL2GPO, - BRCMS_SROM_CCODE, - BRCMS_SROM_CDDPO, - BRCMS_SROM_DEVID, - BRCMS_SROM_ET1MACADDR, - BRCMS_SROM_EXTPAGAIN2G, - BRCMS_SROM_EXTPAGAIN5G, - BRCMS_SROM_FREQOFFSET_CORR, - BRCMS_SROM_HW_IQCAL_EN, - BRCMS_SROM_IL0MACADDR, - BRCMS_SROM_IQCAL_SWP_DIS, - BRCMS_SROM_LEDBH0, - BRCMS_SROM_LEDBH1, - BRCMS_SROM_LEDBH2, - BRCMS_SROM_LEDBH3, - BRCMS_SROM_LEDDC, - BRCMS_SROM_LEGOFDM40DUPPO, - BRCMS_SROM_LEGOFDMBW202GPO, - BRCMS_SROM_LEGOFDMBW205GHPO, - BRCMS_SROM_LEGOFDMBW205GLPO, - BRCMS_SROM_LEGOFDMBW205GMPO, - BRCMS_SROM_LEGOFDMBW20UL2GPO, - BRCMS_SROM_LEGOFDMBW20UL5GHPO, - BRCMS_SROM_LEGOFDMBW20UL5GLPO, - BRCMS_SROM_LEGOFDMBW20UL5GMPO, - BRCMS_SROM_MACADDR, - BRCMS_SROM_MCS2GPO0, - BRCMS_SROM_MCS2GPO1, - BRCMS_SROM_MCS2GPO2, - BRCMS_SROM_MCS2GPO3, - BRCMS_SROM_MCS2GPO4, - BRCMS_SROM_MCS2GPO5, - BRCMS_SROM_MCS2GPO6, - BRCMS_SROM_MCS2GPO7, - BRCMS_SROM_MCS32PO, - BRCMS_SROM_MCS5GHPO0, - BRCMS_SROM_MCS5GHPO1, - BRCMS_SROM_MCS5GHPO2, - BRCMS_SROM_MCS5GHPO3, - BRCMS_SROM_MCS5GHPO4, - BRCMS_SROM_MCS5GHPO5, - BRCMS_SROM_MCS5GHPO6, - BRCMS_SROM_MCS5GHPO7, - BRCMS_SROM_MCS5GLPO0, - BRCMS_SROM_MCS5GLPO1, - BRCMS_SROM_MCS5GLPO2, - BRCMS_SROM_MCS5GLPO3, - BRCMS_SROM_MCS5GLPO4, - BRCMS_SROM_MCS5GLPO5, - BRCMS_SROM_MCS5GLPO6, - BRCMS_SROM_MCS5GLPO7, - BRCMS_SROM_MCS5GPO0, - BRCMS_SROM_MCS5GPO1, - BRCMS_SROM_MCS5GPO2, - BRCMS_SROM_MCS5GPO3, - BRCMS_SROM_MCS5GPO4, - BRCMS_SROM_MCS5GPO5, - BRCMS_SROM_MCS5GPO6, - BRCMS_SROM_MCS5GPO7, - BRCMS_SROM_MCSBW202GPO, - BRCMS_SROM_MCSBW205GHPO, - BRCMS_SROM_MCSBW205GLPO, - BRCMS_SROM_MCSBW205GMPO, - BRCMS_SROM_MCSBW20UL2GPO, - BRCMS_SROM_MCSBW20UL5GHPO, - BRCMS_SROM_MCSBW20UL5GLPO, - BRCMS_SROM_MCSBW20UL5GMPO, - BRCMS_SROM_MCSBW402GPO, - BRCMS_SROM_MCSBW405GHPO, - BRCMS_SROM_MCSBW405GLPO, - BRCMS_SROM_MCSBW405GMPO, - BRCMS_SROM_MEASPOWER, - BRCMS_SROM_OFDM2GPO, - BRCMS_SROM_OFDM5GHPO, - BRCMS_SROM_OFDM5GLPO, - BRCMS_SROM_OFDM5GPO, - BRCMS_SROM_OPO, - BRCMS_SROM_PA0B0, - BRCMS_SROM_PA0B1, - BRCMS_SROM_PA0B2, - BRCMS_SROM_PA0ITSSIT, - BRCMS_SROM_PA0MAXPWR, - BRCMS_SROM_PA1B0, - BRCMS_SROM_PA1B1, - BRCMS_SROM_PA1B2, - BRCMS_SROM_PA1HIB0, - BRCMS_SROM_PA1HIB1, - BRCMS_SROM_PA1HIB2, - BRCMS_SROM_PA1HIMAXPWR, - BRCMS_SROM_PA1ITSSIT, - BRCMS_SROM_PA1LOB0, - BRCMS_SROM_PA1LOB1, - BRCMS_SROM_PA1LOB2, - BRCMS_SROM_PA1LOMAXPWR, - BRCMS_SROM_PA1MAXPWR, - BRCMS_SROM_PDETRANGE2G, - BRCMS_SROM_PDETRANGE5G, - BRCMS_SROM_PHYCAL_TEMPDELTA, - BRCMS_SROM_RAWTEMPSENSE, - BRCMS_SROM_REGREV, - BRCMS_SROM_REV, - BRCMS_SROM_RSSISAV2G, - BRCMS_SROM_RSSISAV5G, - BRCMS_SROM_RSSISMC2G, - BRCMS_SROM_RSSISMC5G, - BRCMS_SROM_RSSISMF2G, - BRCMS_SROM_RSSISMF5G, - BRCMS_SROM_RXCHAIN, - BRCMS_SROM_RXPO2G, - BRCMS_SROM_RXPO5G, - BRCMS_SROM_STBCPO, - BRCMS_SROM_TEMPCORRX, - BRCMS_SROM_TEMPOFFSET, - BRCMS_SROM_TEMPSENSE_OPTION, - BRCMS_SROM_TEMPSENSE_SLOPE, - BRCMS_SROM_TEMPTHRESH, - BRCMS_SROM_TRI2G, - BRCMS_SROM_TRI5GH, - BRCMS_SROM_TRI5GL, - BRCMS_SROM_TRI5G, - BRCMS_SROM_TRISO2G, - BRCMS_SROM_TRISO5G, - BRCMS_SROM_TSSIPOS2G, - BRCMS_SROM_TSSIPOS5G, - BRCMS_SROM_TXCHAIN, - /* - * per-path identifiers (see srom.c) - */ - BRCMS_SROM_ITT2GA0, - BRCMS_SROM_ITT2GA1, - BRCMS_SROM_ITT2GA2, - BRCMS_SROM_ITT2GA3, - BRCMS_SROM_ITT5GA0, - BRCMS_SROM_ITT5GA1, - BRCMS_SROM_ITT5GA2, - BRCMS_SROM_ITT5GA3, - BRCMS_SROM_MAXP2GA0, - BRCMS_SROM_MAXP2GA1, - BRCMS_SROM_MAXP2GA2, - BRCMS_SROM_MAXP2GA3, - BRCMS_SROM_MAXP5GA0, - BRCMS_SROM_MAXP5GA1, - BRCMS_SROM_MAXP5GA2, - BRCMS_SROM_MAXP5GA3, - BRCMS_SROM_MAXP5GHA0, - BRCMS_SROM_MAXP5GHA1, - BRCMS_SROM_MAXP5GHA2, - BRCMS_SROM_MAXP5GHA3, - BRCMS_SROM_MAXP5GLA0, - BRCMS_SROM_MAXP5GLA1, - BRCMS_SROM_MAXP5GLA2, - BRCMS_SROM_MAXP5GLA3, - BRCMS_SROM_PA2GW0A0, - BRCMS_SROM_PA2GW0A1, - BRCMS_SROM_PA2GW0A2, - BRCMS_SROM_PA2GW0A3, - BRCMS_SROM_PA2GW1A0, - BRCMS_SROM_PA2GW1A1, - BRCMS_SROM_PA2GW1A2, - BRCMS_SROM_PA2GW1A3, - BRCMS_SROM_PA2GW2A0, - BRCMS_SROM_PA2GW2A1, - BRCMS_SROM_PA2GW2A2, - BRCMS_SROM_PA2GW2A3, - BRCMS_SROM_PA5GHW0A0, - BRCMS_SROM_PA5GHW0A1, - BRCMS_SROM_PA5GHW0A2, - BRCMS_SROM_PA5GHW0A3, - BRCMS_SROM_PA5GHW1A0, - BRCMS_SROM_PA5GHW1A1, - BRCMS_SROM_PA5GHW1A2, - BRCMS_SROM_PA5GHW1A3, - BRCMS_SROM_PA5GHW2A0, - BRCMS_SROM_PA5GHW2A1, - BRCMS_SROM_PA5GHW2A2, - BRCMS_SROM_PA5GHW2A3, - BRCMS_SROM_PA5GLW0A0, - BRCMS_SROM_PA5GLW0A1, - BRCMS_SROM_PA5GLW0A2, - BRCMS_SROM_PA5GLW0A3, - BRCMS_SROM_PA5GLW1A0, - BRCMS_SROM_PA5GLW1A1, - BRCMS_SROM_PA5GLW1A2, - BRCMS_SROM_PA5GLW1A3, - BRCMS_SROM_PA5GLW2A0, - BRCMS_SROM_PA5GLW2A1, - BRCMS_SROM_PA5GLW2A2, - BRCMS_SROM_PA5GLW2A3, - BRCMS_SROM_PA5GW0A0, - BRCMS_SROM_PA5GW0A1, - BRCMS_SROM_PA5GW0A2, - BRCMS_SROM_PA5GW0A3, - BRCMS_SROM_PA5GW1A0, - BRCMS_SROM_PA5GW1A1, - BRCMS_SROM_PA5GW1A2, - BRCMS_SROM_PA5GW1A3, - BRCMS_SROM_PA5GW2A0, - BRCMS_SROM_PA5GW2A1, - BRCMS_SROM_PA5GW2A2, - BRCMS_SROM_PA5GW2A3, -}; - #define BRCMS_NUMRATES 16 /* max # of rates in a rateset */ /* phy types */ @@ -565,8 +339,6 @@ extern void brcms_c_ampdu_flush(struct brcms_c_info *wlc, struct ieee80211_sta *sta, u16 tid); extern void brcms_c_ampdu_tx_operational(struct brcms_c_info *wlc, u8 tid, u8 ba_wsize, uint max_rx_ampdu_bytes); -extern char *getvar(struct si_pub *sih, enum brcms_srom_id id); -extern int getintvar(struct si_pub *sih, enum brcms_srom_id id); extern int brcms_c_module_register(struct brcms_pub *pub, const char *name, struct brcms_info *hdl, int (*down_fn)(void *handle)); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/srom.c b/drivers/net/wireless/brcm80211/brcmsmac/srom.c deleted file mode 100644 index b96f4b9d74bd..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/srom.c +++ /dev/null @@ -1,980 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/etherdevice.h> -#include <linux/crc8.h> -#include <stdarg.h> - -#include <chipcommon.h> -#include <brcmu_utils.h> -#include "pub.h" -#include "nicpci.h" -#include "aiutils.h" -#include "otp.h" -#include "srom.h" -#include "soc.h" - -/* - * SROM CRC8 polynomial value: - * - * x^8 + x^7 +x^6 + x^4 + x^2 + 1 - */ -#define SROM_CRC8_POLY 0xAB - -/* Maximum srom: 6 Kilobits == 768 bytes */ -#define SROM_MAX 768 - -/* PCI fields */ -#define PCI_F0DEVID 48 - -#define SROM_WORDS 64 - -#define SROM_SSID 2 - -#define SROM_WL1LHMAXP 29 - -#define SROM_WL1LPAB0 30 -#define SROM_WL1LPAB1 31 -#define SROM_WL1LPAB2 32 - -#define SROM_WL1HPAB0 33 -#define SROM_WL1HPAB1 34 -#define SROM_WL1HPAB2 35 - -#define SROM_MACHI_IL0 36 -#define SROM_MACMID_IL0 37 -#define SROM_MACLO_IL0 38 -#define SROM_MACHI_ET1 42 -#define SROM_MACMID_ET1 43 -#define SROM_MACLO_ET1 44 - -#define SROM_BXARSSI2G 40 -#define SROM_BXARSSI5G 41 - -#define SROM_TRI52G 42 -#define SROM_TRI5GHL 43 - -#define SROM_RXPO52G 45 - -#define SROM_AABREV 46 -/* Fields in AABREV */ -#define SROM_BR_MASK 0x00ff -#define SROM_CC_MASK 0x0f00 -#define SROM_CC_SHIFT 8 -#define SROM_AA0_MASK 0x3000 -#define SROM_AA0_SHIFT 12 -#define SROM_AA1_MASK 0xc000 -#define SROM_AA1_SHIFT 14 - -#define SROM_WL0PAB0 47 -#define SROM_WL0PAB1 48 -#define SROM_WL0PAB2 49 - -#define SROM_LEDBH10 50 -#define SROM_LEDBH32 51 - -#define SROM_WL10MAXP 52 - -#define SROM_WL1PAB0 53 -#define SROM_WL1PAB1 54 -#define SROM_WL1PAB2 55 - -#define SROM_ITT 56 - -#define SROM_BFL 57 -#define SROM_BFL2 28 - -#define SROM_AG10 58 - -#define SROM_CCODE 59 - -#define SROM_OPO 60 - -#define SROM_CRCREV 63 - -#define SROM4_WORDS 220 - -#define SROM4_TXCHAIN_MASK 0x000f -#define SROM4_RXCHAIN_MASK 0x00f0 -#define SROM4_SWITCH_MASK 0xff00 - -/* Per-path fields */ -#define MAX_PATH_SROM 4 - -#define SROM4_CRCREV 219 - -/* SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6. - * This is acombined srom for both MIMO and SISO boards, usable in - * the .130 4Kilobit OTP with hardware redundancy. - */ -#define SROM8_BREV 65 - -#define SROM8_BFL0 66 -#define SROM8_BFL1 67 -#define SROM8_BFL2 68 -#define SROM8_BFL3 69 - -#define SROM8_MACHI 70 -#define SROM8_MACMID 71 -#define SROM8_MACLO 72 - -#define SROM8_CCODE 73 -#define SROM8_REGREV 74 - -#define SROM8_LEDBH10 75 -#define SROM8_LEDBH32 76 - -#define SROM8_LEDDC 77 - -#define SROM8_AA 78 - -#define SROM8_AG10 79 -#define SROM8_AG32 80 - -#define SROM8_TXRXC 81 - -#define SROM8_BXARSSI2G 82 -#define SROM8_BXARSSI5G 83 -#define SROM8_TRI52G 84 -#define SROM8_TRI5GHL 85 -#define SROM8_RXPO52G 86 - -#define SROM8_FEM2G 87 -#define SROM8_FEM5G 88 -#define SROM8_FEM_ANTSWLUT_MASK 0xf800 -#define SROM8_FEM_ANTSWLUT_SHIFT 11 -#define SROM8_FEM_TR_ISO_MASK 0x0700 -#define SROM8_FEM_TR_ISO_SHIFT 8 -#define SROM8_FEM_PDET_RANGE_MASK 0x00f8 -#define SROM8_FEM_PDET_RANGE_SHIFT 3 -#define SROM8_FEM_EXTPA_GAIN_MASK 0x0006 -#define SROM8_FEM_EXTPA_GAIN_SHIFT 1 -#define SROM8_FEM_TSSIPOS_MASK 0x0001 -#define SROM8_FEM_TSSIPOS_SHIFT 0 - -#define SROM8_THERMAL 89 - -/* Temp sense related entries */ -#define SROM8_MPWR_RAWTS 90 -#define SROM8_TS_SLP_OPT_CORRX 91 -/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, - * IQSWP: IQ CAL swap disable */ -#define SROM8_FOC_HWIQ_IQSWP 92 - -/* Temperature delta for PHY calibration */ -#define SROM8_PHYCAL_TEMPDELTA 93 - -/* Per-path offsets & fields */ -#define SROM8_PATH0 96 -#define SROM8_PATH1 112 -#define SROM8_PATH2 128 -#define SROM8_PATH3 144 - -#define SROM8_2G_ITT_MAXP 0 -#define SROM8_2G_PA 1 -#define SROM8_5G_ITT_MAXP 4 -#define SROM8_5GLH_MAXP 5 -#define SROM8_5G_PA 6 -#define SROM8_5GL_PA 9 -#define SROM8_5GH_PA 12 - -/* All the miriad power offsets */ -#define SROM8_2G_CCKPO 160 - -#define SROM8_2G_OFDMPO 161 -#define SROM8_5G_OFDMPO 163 -#define SROM8_5GL_OFDMPO 165 -#define SROM8_5GH_OFDMPO 167 - -#define SROM8_2G_MCSPO 169 -#define SROM8_5G_MCSPO 177 -#define SROM8_5GL_MCSPO 185 -#define SROM8_5GH_MCSPO 193 - -#define SROM8_CDDPO 201 -#define SROM8_STBCPO 202 -#define SROM8_BW40PO 203 -#define SROM8_BWDUPPO 204 - -/* SISO PA parameters are in the path0 spaces */ -#define SROM8_SISO 96 - -/* Legacy names for SISO PA paramters */ -#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP) -#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA) -#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1) -#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2) -#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP) -#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP) -#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA) -#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1) -#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2) -#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA) -#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1) -#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2) -#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA) -#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1) -#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2) - -/* SROM REV 9 */ -#define SROM9_2GPO_CCKBW20 160 -#define SROM9_2GPO_CCKBW20UL 161 -#define SROM9_2GPO_LOFDMBW20 162 -#define SROM9_2GPO_LOFDMBW20UL 164 - -#define SROM9_5GLPO_LOFDMBW20 166 -#define SROM9_5GLPO_LOFDMBW20UL 168 -#define SROM9_5GMPO_LOFDMBW20 170 -#define SROM9_5GMPO_LOFDMBW20UL 172 -#define SROM9_5GHPO_LOFDMBW20 174 -#define SROM9_5GHPO_LOFDMBW20UL 176 - -#define SROM9_2GPO_MCSBW20 178 -#define SROM9_2GPO_MCSBW20UL 180 -#define SROM9_2GPO_MCSBW40 182 - -#define SROM9_5GLPO_MCSBW20 184 -#define SROM9_5GLPO_MCSBW20UL 186 -#define SROM9_5GLPO_MCSBW40 188 -#define SROM9_5GMPO_MCSBW20 190 -#define SROM9_5GMPO_MCSBW20UL 192 -#define SROM9_5GMPO_MCSBW40 194 -#define SROM9_5GHPO_MCSBW20 196 -#define SROM9_5GHPO_MCSBW20UL 198 -#define SROM9_5GHPO_MCSBW40 200 - -#define SROM9_PO_MCS32 202 -#define SROM9_PO_LOFDM40DUP 203 - -/* SROM flags (see sromvar_t) */ - -/* value continues as described by the next entry */ -#define SRFL_MORE 1 -#define SRFL_NOFFS 2 /* value bits can't be all one's */ -#define SRFL_PRHEX 4 /* value is in hexdecimal format */ -#define SRFL_PRSIGN 8 /* value is in signed decimal format */ -#define SRFL_CCODE 0x10 /* value is in country code format */ -#define SRFL_ETHADDR 0x20 /* value is an Ethernet address */ -#define SRFL_LEDDC 0x40 /* value is an LED duty cycle */ -/* do not generate a nvram param, entry is for mfgc */ -#define SRFL_NOVAR 0x80 - -/* Max. nvram variable table size */ -#define MAXSZ_NVRAM_VARS 4096 - -/* - * indicates type of value. - */ -enum brcms_srom_var_type { - BRCMS_SROM_STRING, - BRCMS_SROM_SNUMBER, - BRCMS_SROM_UNUMBER -}; - -/* - * storage type for srom variable. - * - * var_list: for linked list operations. - * varid: identifier of the variable. - * var_type: type of variable. - * buf: variable value when var_type == BRCMS_SROM_STRING. - * uval: unsigned variable value when var_type == BRCMS_SROM_UNUMBER. - * sval: signed variable value when var_type == BRCMS_SROM_SNUMBER. - */ -struct brcms_srom_list_head { - struct list_head var_list; - enum brcms_srom_id varid; - enum brcms_srom_var_type var_type; - union { - char buf[0]; - u32 uval; - s32 sval; - }; -}; - -struct brcms_sromvar { - enum brcms_srom_id varid; - u32 revmask; - u32 flags; - u16 off; - u16 mask; -}; - -struct brcms_varbuf { - char *base; /* pointer to buffer base */ - char *buf; /* pointer to current position */ - unsigned int size; /* current (residual) size in bytes */ -}; - -/* - * Assumptions: - * - Ethernet address spans across 3 consecutive words - * - * Table rules: - * - Add multiple entries next to each other if a value spans across multiple - * words (even multiple fields in the same word) with each entry except the - * last having it's SRFL_MORE bit set. - * - Ethernet address entry does not follow above rule and must not have - * SRFL_MORE bit set. Its SRFL_ETHADDR bit implies it takes multiple words. - * - The last entry's name field must be NULL to indicate the end of the table. - * Other entries must have non-NULL name. - */ -static const struct brcms_sromvar pci_sromvars[] = { - {BRCMS_SROM_DEVID, 0xffffff00, SRFL_PRHEX | SRFL_NOVAR, PCI_F0DEVID, - 0xffff}, - {BRCMS_SROM_BOARDREV, 0xffffff00, SRFL_PRHEX, SROM8_BREV, 0xffff}, - {BRCMS_SROM_BOARDFLAGS, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL0, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_BFL1, 0xffff}, - {BRCMS_SROM_BOARDFLAGS2, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL2, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_BFL3, 0xffff}, - {BRCMS_SROM_BOARDTYPE, 0xfffffffc, SRFL_PRHEX, SROM_SSID, 0xffff}, - {BRCMS_SROM_BOARDNUM, 0xffffff00, 0, SROM8_MACLO, 0xffff}, - {BRCMS_SROM_REGREV, 0xffffff00, 0, SROM8_REGREV, 0x00ff}, - {BRCMS_SROM_LEDBH0, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0x00ff}, - {BRCMS_SROM_LEDBH1, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0xff00}, - {BRCMS_SROM_LEDBH2, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0x00ff}, - {BRCMS_SROM_LEDBH3, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0xff00}, - {BRCMS_SROM_PA0B0, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB0, 0xffff}, - {BRCMS_SROM_PA0B1, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB1, 0xffff}, - {BRCMS_SROM_PA0B2, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB2, 0xffff}, - {BRCMS_SROM_PA0ITSSIT, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0xff00}, - {BRCMS_SROM_PA0MAXPWR, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0x00ff}, - {BRCMS_SROM_OPO, 0xffffff00, 0, SROM8_2G_OFDMPO, 0x00ff}, - {BRCMS_SROM_AA2G, 0xffffff00, 0, SROM8_AA, 0x00ff}, - {BRCMS_SROM_AA5G, 0xffffff00, 0, SROM8_AA, 0xff00}, - {BRCMS_SROM_AG0, 0xffffff00, 0, SROM8_AG10, 0x00ff}, - {BRCMS_SROM_AG1, 0xffffff00, 0, SROM8_AG10, 0xff00}, - {BRCMS_SROM_AG2, 0xffffff00, 0, SROM8_AG32, 0x00ff}, - {BRCMS_SROM_AG3, 0xffffff00, 0, SROM8_AG32, 0xff00}, - {BRCMS_SROM_PA1B0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0, 0xffff}, - {BRCMS_SROM_PA1B1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1, 0xffff}, - {BRCMS_SROM_PA1B2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2, 0xffff}, - {BRCMS_SROM_PA1LOB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_LC, 0xffff}, - {BRCMS_SROM_PA1LOB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_LC, 0xffff}, - {BRCMS_SROM_PA1LOB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_LC, 0xffff}, - {BRCMS_SROM_PA1HIB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_HC, 0xffff}, - {BRCMS_SROM_PA1HIB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_HC, 0xffff}, - {BRCMS_SROM_PA1HIB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_HC, 0xffff}, - {BRCMS_SROM_PA1ITSSIT, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0xff00}, - {BRCMS_SROM_PA1MAXPWR, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0x00ff}, - {BRCMS_SROM_PA1LOMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0xff00}, - {BRCMS_SROM_PA1HIMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0x00ff}, - {BRCMS_SROM_BXA2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x1800}, - {BRCMS_SROM_RSSISAV2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x0700}, - {BRCMS_SROM_RSSISMC2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x00f0}, - {BRCMS_SROM_RSSISMF2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x000f}, - {BRCMS_SROM_BXA5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x1800}, - {BRCMS_SROM_RSSISAV5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x0700}, - {BRCMS_SROM_RSSISMC5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x00f0}, - {BRCMS_SROM_RSSISMF5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x000f}, - {BRCMS_SROM_TRI2G, 0xffffff00, 0, SROM8_TRI52G, 0x00ff}, - {BRCMS_SROM_TRI5G, 0xffffff00, 0, SROM8_TRI52G, 0xff00}, - {BRCMS_SROM_TRI5GL, 0xffffff00, 0, SROM8_TRI5GHL, 0x00ff}, - {BRCMS_SROM_TRI5GH, 0xffffff00, 0, SROM8_TRI5GHL, 0xff00}, - {BRCMS_SROM_RXPO2G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0x00ff}, - {BRCMS_SROM_RXPO5G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0xff00}, - {BRCMS_SROM_TXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_TXCHAIN_MASK}, - {BRCMS_SROM_RXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_RXCHAIN_MASK}, - {BRCMS_SROM_ANTSWITCH, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_SWITCH_MASK}, - {BRCMS_SROM_TSSIPOS2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_TSSIPOS_MASK}, - {BRCMS_SROM_EXTPAGAIN2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_EXTPA_GAIN_MASK}, - {BRCMS_SROM_PDETRANGE2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_PDET_RANGE_MASK}, - {BRCMS_SROM_TRISO2G, 0xffffff00, 0, SROM8_FEM2G, SROM8_FEM_TR_ISO_MASK}, - {BRCMS_SROM_ANTSWCTL2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_ANTSWLUT_MASK}, - {BRCMS_SROM_TSSIPOS5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_TSSIPOS_MASK}, - {BRCMS_SROM_EXTPAGAIN5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_EXTPA_GAIN_MASK}, - {BRCMS_SROM_PDETRANGE5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_PDET_RANGE_MASK}, - {BRCMS_SROM_TRISO5G, 0xffffff00, 0, SROM8_FEM5G, SROM8_FEM_TR_ISO_MASK}, - {BRCMS_SROM_ANTSWCTL5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_ANTSWLUT_MASK}, - {BRCMS_SROM_TEMPTHRESH, 0xffffff00, 0, SROM8_THERMAL, 0xff00}, - {BRCMS_SROM_TEMPOFFSET, 0xffffff00, 0, SROM8_THERMAL, 0x00ff}, - - {BRCMS_SROM_CCODE, 0xffffff00, SRFL_CCODE, SROM8_CCODE, 0xffff}, - {BRCMS_SROM_MACADDR, 0xffffff00, SRFL_ETHADDR, SROM8_MACHI, 0xffff}, - {BRCMS_SROM_LEDDC, 0xffffff00, SRFL_NOFFS | SRFL_LEDDC, SROM8_LEDDC, - 0xffff}, - {BRCMS_SROM_RAWTEMPSENSE, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, - 0x01ff}, - {BRCMS_SROM_MEASPOWER, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, - 0xfe00}, - {BRCMS_SROM_TEMPSENSE_SLOPE, 0xffffff00, SRFL_PRHEX, - SROM8_TS_SLP_OPT_CORRX, 0x00ff}, - {BRCMS_SROM_TEMPCORRX, 0xffffff00, SRFL_PRHEX, SROM8_TS_SLP_OPT_CORRX, - 0xfc00}, - {BRCMS_SROM_TEMPSENSE_OPTION, 0xffffff00, SRFL_PRHEX, - SROM8_TS_SLP_OPT_CORRX, 0x0300}, - {BRCMS_SROM_FREQOFFSET_CORR, 0xffffff00, SRFL_PRHEX, - SROM8_FOC_HWIQ_IQSWP, 0x000f}, - {BRCMS_SROM_IQCAL_SWP_DIS, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, - 0x0010}, - {BRCMS_SROM_HW_IQCAL_EN, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, - 0x0020}, - {BRCMS_SROM_PHYCAL_TEMPDELTA, 0xffffff00, 0, SROM8_PHYCAL_TEMPDELTA, - 0x00ff}, - - {BRCMS_SROM_CCK2GPO, 0x00000100, 0, SROM8_2G_CCKPO, 0xffff}, - {BRCMS_SROM_OFDM2GPO, 0x00000100, SRFL_MORE, SROM8_2G_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_2G_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GPO, 0x00000100, SRFL_MORE, SROM8_5G_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5G_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GLPO, 0x00000100, SRFL_MORE, SROM8_5GL_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5GL_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GHPO, 0x00000100, SRFL_MORE, SROM8_5GH_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5GH_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_MCS2GPO0, 0x00000100, 0, SROM8_2G_MCSPO, 0xffff}, - {BRCMS_SROM_MCS2GPO1, 0x00000100, 0, SROM8_2G_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS2GPO2, 0x00000100, 0, SROM8_2G_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS2GPO3, 0x00000100, 0, SROM8_2G_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS2GPO4, 0x00000100, 0, SROM8_2G_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS2GPO5, 0x00000100, 0, SROM8_2G_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS2GPO6, 0x00000100, 0, SROM8_2G_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS2GPO7, 0x00000100, 0, SROM8_2G_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GPO0, 0x00000100, 0, SROM8_5G_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GPO1, 0x00000100, 0, SROM8_5G_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GPO2, 0x00000100, 0, SROM8_5G_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GPO3, 0x00000100, 0, SROM8_5G_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GPO4, 0x00000100, 0, SROM8_5G_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GPO5, 0x00000100, 0, SROM8_5G_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GPO6, 0x00000100, 0, SROM8_5G_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GPO7, 0x00000100, 0, SROM8_5G_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GLPO0, 0x00000100, 0, SROM8_5GL_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GLPO1, 0x00000100, 0, SROM8_5GL_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GLPO2, 0x00000100, 0, SROM8_5GL_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GLPO3, 0x00000100, 0, SROM8_5GL_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GLPO4, 0x00000100, 0, SROM8_5GL_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GLPO5, 0x00000100, 0, SROM8_5GL_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GLPO6, 0x00000100, 0, SROM8_5GL_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GLPO7, 0x00000100, 0, SROM8_5GL_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GHPO0, 0x00000100, 0, SROM8_5GH_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GHPO1, 0x00000100, 0, SROM8_5GH_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GHPO2, 0x00000100, 0, SROM8_5GH_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GHPO3, 0x00000100, 0, SROM8_5GH_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GHPO4, 0x00000100, 0, SROM8_5GH_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GHPO5, 0x00000100, 0, SROM8_5GH_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GHPO6, 0x00000100, 0, SROM8_5GH_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GHPO7, 0x00000100, 0, SROM8_5GH_MCSPO + 7, 0xffff}, - {BRCMS_SROM_CDDPO, 0x00000100, 0, SROM8_CDDPO, 0xffff}, - {BRCMS_SROM_STBCPO, 0x00000100, 0, SROM8_STBCPO, 0xffff}, - {BRCMS_SROM_BW40PO, 0x00000100, 0, SROM8_BW40PO, 0xffff}, - {BRCMS_SROM_BWDUPPO, 0x00000100, 0, SROM8_BWDUPPO, 0xffff}, - - /* power per rate from sromrev 9 */ - {BRCMS_SROM_CCKBW202GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20, 0xffff}, - {BRCMS_SROM_CCKBW20UL2GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20UL, 0xffff}, - {BRCMS_SROM_LEGOFDMBW202GPO, 0xfffffe00, SRFL_MORE, - SROM9_2GPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL2GPO, 0xfffffe00, SRFL_MORE, - SROM9_2GPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW202GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL2GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20UL, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW402GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCS32PO, 0xfffffe00, 0, SROM9_PO_MCS32, 0xffff}, - {BRCMS_SROM_LEGOFDM40DUPPO, 0xfffffe00, 0, SROM9_PO_LOFDM40DUP, 0xffff}, - - {BRCMS_SROM_NULL, 0, 0, 0, 0} -}; - -static const struct brcms_sromvar perpath_pci_sromvars[] = { - {BRCMS_SROM_MAXP2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0x00ff}, - {BRCMS_SROM_ITT2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0xff00}, - {BRCMS_SROM_ITT5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0xff00}, - {BRCMS_SROM_PA2GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA, 0xffff}, - {BRCMS_SROM_PA2GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 1, 0xffff}, - {BRCMS_SROM_PA2GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 2, 0xffff}, - {BRCMS_SROM_MAXP5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0x00ff}, - {BRCMS_SROM_MAXP5GHA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0x00ff}, - {BRCMS_SROM_MAXP5GLA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0xff00}, - {BRCMS_SROM_PA5GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA, 0xffff}, - {BRCMS_SROM_PA5GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 1, 0xffff}, - {BRCMS_SROM_PA5GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 2, 0xffff}, - {BRCMS_SROM_PA5GLW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA, 0xffff}, - {BRCMS_SROM_PA5GLW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 1, - 0xffff}, - {BRCMS_SROM_PA5GLW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 2, - 0xffff}, - {BRCMS_SROM_PA5GHW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA, 0xffff}, - {BRCMS_SROM_PA5GHW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 1, - 0xffff}, - {BRCMS_SROM_PA5GHW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 2, - 0xffff}, - {BRCMS_SROM_NULL, 0, 0, 0, 0} -}; - -/* crc table has the same contents for every device instance, so it can be - * shared between devices. */ -static u8 brcms_srom_crc8_table[CRC8_TABLE_SIZE]; - -static uint mask_shift(u16 mask) -{ - uint i; - for (i = 0; i < (sizeof(mask) << 3); i++) { - if (mask & (1 << i)) - return i; - } - return 0; -} - -static uint mask_width(u16 mask) -{ - int i; - for (i = (sizeof(mask) << 3) - 1; i >= 0; i--) { - if (mask & (1 << i)) - return (uint) (i - mask_shift(mask) + 1); - } - return 0; -} - -static inline void le16_to_cpu_buf(u16 *buf, uint nwords) -{ - while (nwords--) - *(buf + nwords) = le16_to_cpu(*(__le16 *)(buf + nwords)); -} - -static inline void cpu_to_le16_buf(u16 *buf, uint nwords) -{ - while (nwords--) - *(__le16 *)(buf + nwords) = cpu_to_le16(*(buf + nwords)); -} - -/* - * convert binary srom data into linked list of srom variable items. - */ -static int -_initvars_srom_pci(u8 sromrev, u16 *srom, struct list_head *var_list) -{ - struct brcms_srom_list_head *entry; - enum brcms_srom_id id; - u16 w; - u32 val = 0; - const struct brcms_sromvar *srv; - uint width; - uint flags; - u32 sr = (1 << sromrev); - uint p; - uint pb = SROM8_PATH0; - const uint psz = SROM8_PATH1 - SROM8_PATH0; - - /* first store the srom revision */ - entry = kzalloc(sizeof(struct brcms_srom_list_head), GFP_KERNEL); - if (!entry) - return -ENOMEM; - - entry->varid = BRCMS_SROM_REV; - entry->var_type = BRCMS_SROM_UNUMBER; - entry->uval = sromrev; - list_add(&entry->var_list, var_list); - - for (srv = pci_sromvars; srv->varid != BRCMS_SROM_NULL; srv++) { - enum brcms_srom_var_type type; - u8 ea[ETH_ALEN]; - u8 extra_space = 0; - - if ((srv->revmask & sr) == 0) - continue; - - flags = srv->flags; - id = srv->varid; - - /* This entry is for mfgc only. Don't generate param for it, */ - if (flags & SRFL_NOVAR) - continue; - - if (flags & SRFL_ETHADDR) { - /* - * stored in string format XX:XX:XX:XX:XX:XX (17 chars) - */ - ea[0] = (srom[srv->off] >> 8) & 0xff; - ea[1] = srom[srv->off] & 0xff; - ea[2] = (srom[srv->off + 1] >> 8) & 0xff; - ea[3] = srom[srv->off + 1] & 0xff; - ea[4] = (srom[srv->off + 2] >> 8) & 0xff; - ea[5] = srom[srv->off + 2] & 0xff; - /* 17 characters + string terminator - union size */ - extra_space = 18 - sizeof(s32); - type = BRCMS_SROM_STRING; - } else { - w = srom[srv->off]; - val = (w & srv->mask) >> mask_shift(srv->mask); - width = mask_width(srv->mask); - - while (srv->flags & SRFL_MORE) { - srv++; - if (srv->off == 0) - continue; - - w = srom[srv->off]; - val += - ((w & srv->mask) >> mask_shift(srv-> - mask)) << - width; - width += mask_width(srv->mask); - } - - if ((flags & SRFL_NOFFS) - && ((int)val == (1 << width) - 1)) - continue; - - if (flags & SRFL_CCODE) { - type = BRCMS_SROM_STRING; - } else if (flags & SRFL_LEDDC) { - /* LED Powersave duty cycle has to be scaled: - *(oncount >> 24) (offcount >> 8) - */ - u32 w32 = /* oncount */ - (((val >> 8) & 0xff) << 24) | - /* offcount */ - (((val & 0xff)) << 8); - type = BRCMS_SROM_UNUMBER; - val = w32; - } else if ((flags & SRFL_PRSIGN) - && (val & (1 << (width - 1)))) { - type = BRCMS_SROM_SNUMBER; - val |= ~0 << width; - } else - type = BRCMS_SROM_UNUMBER; - } - - entry = kzalloc(sizeof(struct brcms_srom_list_head) + - extra_space, GFP_KERNEL); - if (!entry) - return -ENOMEM; - entry->varid = id; - entry->var_type = type; - if (flags & SRFL_ETHADDR) { - snprintf(entry->buf, 18, "%pM", ea); - } else if (flags & SRFL_CCODE) { - if (val == 0) - entry->buf[0] = '\0'; - else - snprintf(entry->buf, 3, "%c%c", - (val >> 8), (val & 0xff)); - } else { - entry->uval = val; - } - - list_add(&entry->var_list, var_list); - } - - for (p = 0; p < MAX_PATH_SROM; p++) { - for (srv = perpath_pci_sromvars; - srv->varid != BRCMS_SROM_NULL; srv++) { - if ((srv->revmask & sr) == 0) - continue; - - if (srv->flags & SRFL_NOVAR) - continue; - - w = srom[pb + srv->off]; - val = (w & srv->mask) >> mask_shift(srv->mask); - width = mask_width(srv->mask); - - /* Cheating: no per-path var is more than - * 1 word */ - if ((srv->flags & SRFL_NOFFS) - && ((int)val == (1 << width) - 1)) - continue; - - entry = - kzalloc(sizeof(struct brcms_srom_list_head), - GFP_KERNEL); - if (!entry) - return -ENOMEM; - entry->varid = srv->varid+p; - entry->var_type = BRCMS_SROM_UNUMBER; - entry->uval = val; - list_add(&entry->var_list, var_list); - } - pb += psz; - } - return 0; -} - -/* - * The crc check is done on a little-endian array, we need - * to switch the bytes around before checking crc (and - * then switch it back). - */ -static int do_crc_check(u16 *buf, unsigned nwords) -{ - u8 crc; - - cpu_to_le16_buf(buf, nwords); - crc = crc8(brcms_srom_crc8_table, (void *)buf, nwords << 1, CRC8_INIT_VALUE); - le16_to_cpu_buf(buf, nwords); - - return crc == CRC8_GOOD_VALUE(brcms_srom_crc8_table); -} - -/* - * Read in and validate sprom. - * Return 0 on success, nonzero on error. - */ -static int -sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc) -{ - int err = 0; - uint i; - struct bcma_device *core; - uint sprom_offset; - - /* determine core to read */ - if (ai_get_ccrev(sih) < 32) { - core = ai_findcore(sih, BCMA_CORE_80211, 0); - sprom_offset = PCI_BAR0_SPROM_OFFSET; - } else { - core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - sprom_offset = CHIPCREGOFFS(sromotp); - } - - /* read the sprom */ - for (i = 0; i < nwords; i++) - buf[i] = bcma_read16(core, sprom_offset+i*2); - - if (buf[0] == 0xffff) - /* - * The hardware thinks that an srom that starts with - * 0xffff is blank, regardless of the rest of the - * content, so declare it bad. - */ - return -ENODATA; - - if (check_crc && !do_crc_check(buf, nwords)) - err = -EIO; - - return err; -} - -static int otp_read_pci(struct si_pub *sih, u16 *buf, uint nwords) -{ - u8 *otp; - uint sz = OTP_SZ_MAX / 2; /* size in words */ - int err = 0; - - otp = kzalloc(OTP_SZ_MAX, GFP_ATOMIC); - if (otp == NULL) - return -ENOMEM; - - err = otp_read_region(sih, OTP_HW_RGN, (u16 *) otp, &sz); - - sz = min_t(uint, sz, nwords); - memcpy(buf, otp, sz * 2); - - kfree(otp); - - /* Check CRC */ - if (buf[0] == 0xffff) - /* The hardware thinks that an srom that starts with 0xffff - * is blank, regardless of the rest of the content, so declare - * it bad. - */ - return -ENODATA; - - /* fixup the endianness so crc8 will pass */ - cpu_to_le16_buf(buf, sz); - if (crc8(brcms_srom_crc8_table, (u8 *) buf, sz * 2, - CRC8_INIT_VALUE) != CRC8_GOOD_VALUE(brcms_srom_crc8_table)) - err = -EIO; - else - /* now correct the endianness of the byte array */ - le16_to_cpu_buf(buf, sz); - - return err; -} - -/* - * Initialize nonvolatile variable table from sprom. - * Return 0 on success, nonzero on error. - */ -int srom_var_init(struct si_pub *sih) -{ - u16 *srom; - u8 sromrev = 0; - u32 sr; - int err = 0; - - /* - * Apply CRC over SROM content regardless SROM is present or not. - */ - srom = kmalloc(SROM_MAX, GFP_ATOMIC); - if (!srom) - return -ENOMEM; - - crc8_populate_lsb(brcms_srom_crc8_table, SROM_CRC8_POLY); - if (ai_is_sprom_available(sih)) { - err = sprom_read_pci(sih, srom, SROM4_WORDS, true); - - if (err == 0) - /* srom read and passed crc */ - /* top word of sprom contains version and crc8 */ - sromrev = srom[SROM4_CRCREV] & 0xff; - } else { - /* Use OTP if SPROM not available */ - err = otp_read_pci(sih, srom, SROM4_WORDS); - if (err == 0) - /* OTP only contain SROM rev8/rev9 for now */ - sromrev = srom[SROM4_CRCREV] & 0xff; - } - - if (!err) { - struct si_info *sii = (struct si_info *)sih; - - /* Bitmask for the sromrev */ - sr = 1 << sromrev; - - /* - * srom version check: Current valid versions: 8, 9 - */ - if ((sr & 0x300) == 0) { - err = -EINVAL; - goto errout; - } - - INIT_LIST_HEAD(&sii->var_list); - - /* parse SROM into name=value pairs. */ - err = _initvars_srom_pci(sromrev, srom, &sii->var_list); - if (err) - srom_free_vars(sih); - } - -errout: - kfree(srom); - return err; -} - -void srom_free_vars(struct si_pub *sih) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry, *next; - - sii = (struct si_info *)sih; - list_for_each_entry_safe(entry, next, &sii->var_list, var_list) { - list_del(&entry->var_list); - kfree(entry); - } -} - -/* - * Search the name=value vars for a specific one and return its value. - * Returns NULL if not found. - */ -char *getvar(struct si_pub *sih, enum brcms_srom_id id) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry; - - sii = (struct si_info *)sih; - - list_for_each_entry(entry, &sii->var_list, var_list) - if (entry->varid == id) - return &entry->buf[0]; - - /* nothing found */ - return NULL; -} - -/* - * Search the vars for a specific one and return its value as - * an integer. Returns 0 if not found.- - */ -int getintvar(struct si_pub *sih, enum brcms_srom_id id) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry; - unsigned long res; - - sii = (struct si_info *)sih; - - list_for_each_entry(entry, &sii->var_list, var_list) - if (entry->varid == id) { - if (entry->var_type == BRCMS_SROM_SNUMBER || - entry->var_type == BRCMS_SROM_UNUMBER) - return (int)entry->sval; - else if (!kstrtoul(&entry->buf[0], 0, &res)) - return (int)res; - } - - return 0; -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/srom.h b/drivers/net/wireless/brcm80211/brcmsmac/srom.h deleted file mode 100644 index f2a58f262c99..000000000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/srom.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_SROM_H_ -#define _BRCM_SROM_H_ - -#include "types.h" - -/* Prototypes */ -extern int srom_var_init(struct si_pub *sih); -extern void srom_free_vars(struct si_pub *sih); - -extern int srom_read(struct si_pub *sih, uint bus, void *curmap, - uint byteoff, uint nbytes, u16 *buf, bool check_crc); - -#endif /* _BRCM_SROM_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/stf.c b/drivers/net/wireless/brcm80211/brcmsmac/stf.c index d8f528eb180c..ed1d1aa71d2d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/stf.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/stf.c @@ -370,9 +370,11 @@ void brcms_c_stf_phy_txant_upd(struct brcms_c_info *wlc) void brcms_c_stf_phy_chain_calc(struct brcms_c_info *wlc) { + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; + /* get available rx/tx chains */ - wlc->stf->hw_txchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_TXCHAIN); - wlc->stf->hw_rxchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_RXCHAIN); + wlc->stf->hw_txchain = sprom->txchain; + wlc->stf->hw_rxchain = sprom->rxchain; /* these parameter are intended to be used for all PHY types */ if (wlc->stf->hw_txchain == 0 || wlc->stf->hw_txchain == 0xf) { |