diff options
Diffstat (limited to 'drivers/net/wireless/hostap/hostap_hw.c')
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_hw.c | 3631 |
1 files changed, 3631 insertions, 0 deletions
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c new file mode 100644 index 000000000000..039ef7f61bee --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -0,0 +1,3631 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2004, Jouni Malinen <jkmaline@cc.hut.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + * + * FIX: + * - there is currently no way of associating TX packets to correct wds device + * when TX Exc/OK event occurs, so all tx_packets and some + * tx_errors/tx_dropped are added to the main netdevice; using sw_support + * field in txdesc might be used to fix this (using Alloc event to increment + * tx_packets would need some further info in txfid table) + * + * Buffer Access Path (BAP) usage: + * Prism2 cards have two separate BAPs for accessing the card memory. These + * should allow concurrent access to two different frames and the driver + * previously used BAP0 for sending data and BAP1 for receiving data. + * However, there seems to be number of issues with concurrent access and at + * least one know hardware bug in using BAP0 and BAP1 concurrently with PCI + * Prism2.5. Therefore, the driver now only uses BAP0 for moving data between + * host and card memories. BAP0 accesses are protected with local->baplock + * (spin_lock_bh) to prevent concurrent use. + */ + + +#include <linux/config.h> +#include <linux/version.h> + +#include <asm/delay.h> +#include <asm/uaccess.h> + +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/proc_fs.h> +#include <linux/if_arp.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/rtnetlink.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <asm/irq.h> + + +#include "hostap_80211.h" +#include "hostap.h" +#include "hostap_ap.h" + + +/* #define final_version */ + +static int mtu = 1500; +module_param(mtu, int, 0444); +MODULE_PARM_DESC(mtu, "Maximum transfer unit"); + +static int channel[MAX_PARM_DEVICES] = { 3, DEF_INTS }; +module_param_array(channel, int, NULL, 0444); +MODULE_PARM_DESC(channel, "Initial channel"); + +static char essid[33] = "test"; +module_param_string(essid, essid, sizeof(essid), 0444); +MODULE_PARM_DESC(essid, "Host AP's ESSID"); + +static int iw_mode[MAX_PARM_DEVICES] = { IW_MODE_MASTER, DEF_INTS }; +module_param_array(iw_mode, int, NULL, 0444); +MODULE_PARM_DESC(iw_mode, "Initial operation mode"); + +static int beacon_int[MAX_PARM_DEVICES] = { 100, DEF_INTS }; +module_param_array(beacon_int, int, NULL, 0444); +MODULE_PARM_DESC(beacon_int, "Beacon interval (1 = 1024 usec)"); + +static int dtim_period[MAX_PARM_DEVICES] = { 1, DEF_INTS }; +module_param_array(dtim_period, int, NULL, 0444); +MODULE_PARM_DESC(dtim_period, "DTIM period"); + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) +static int bus_master_threshold_rx[MAX_PARM_DEVICES] = { 100, DEF_INTS }; +module_param_array(bus_master_threshold_rx, int, NULL, 0444); +MODULE_PARM_DESC(bus_master_threshold_rx, "Packet length threshold for using " + "PCI bus master on RX"); + +static int bus_master_threshold_tx[MAX_PARM_DEVICES] = { 100, DEF_INTS }; +module_param_array(bus_master_threshold_tx, int, NULL, 0444); +MODULE_PARM_DESC(bus_master_threshold_tx, "Packet length threshold for using " + "PCI bus master on TX"); +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + +static char dev_template[16] = "wlan%d"; +module_param_string(dev_template, dev_template, sizeof(dev_template), 0444); +MODULE_PARM_DESC(dev_template, "Prefix for network device name (default: " + "wlan%d)"); + +#ifdef final_version +#define EXTRA_EVENTS_WTERR 0 +#else +/* check WTERR events (Wait Time-out) in development versions */ +#define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR +#endif + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) +#define EXTRA_EVENTS_BUS_MASTER (HFA384X_EV_PCI_M0 | HFA384X_EV_PCI_M1) +#else +#define EXTRA_EVENTS_BUS_MASTER 0 +#endif + +/* Events that will be using BAP0 */ +#define HFA384X_BAP0_EVENTS \ + (HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX) + +/* event mask, i.e., events that will result in an interrupt */ +#define HFA384X_EVENT_MASK \ + (HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \ + HFA384X_EV_CMD | HFA384X_EV_TICK | \ + EXTRA_EVENTS_WTERR | EXTRA_EVENTS_BUS_MASTER) + +/* Default TX control flags: use 802.11 headers and request interrupt for + * failed transmits. Frames that request ACK callback, will add + * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy. + */ +#define HFA384X_TX_CTRL_FLAGS \ + (HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX) + + +/* ca. 1 usec */ +#define HFA384X_CMD_BUSY_TIMEOUT 5000 +#define HFA384X_BAP_BUSY_TIMEOUT 50000 + +/* ca. 10 usec */ +#define HFA384X_CMD_COMPL_TIMEOUT 20000 +#define HFA384X_DL_COMPL_TIMEOUT 1000000 + +/* Wait times for initialization; yield to other processes to avoid busy + * waiting for long time. */ +#define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */ +#define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */ + + +static void prism2_hw_reset(struct net_device *dev); +static void prism2_check_sta_fw_version(local_info_t *local); + +#ifdef PRISM2_DOWNLOAD_SUPPORT +/* hostap_download.c */ +static int prism2_download_aux_dump(struct net_device *dev, + unsigned int addr, int len, u8 *buf); +static u8 * prism2_read_pda(struct net_device *dev); +static int prism2_download(local_info_t *local, + struct prism2_download_param *param); +static void prism2_download_free_data(struct prism2_download_data *dl); +static int prism2_download_volatile(local_info_t *local, + struct prism2_download_data *param); +static int prism2_download_genesis(local_info_t *local, + struct prism2_download_data *param); +static int prism2_get_ram_size(local_info_t *local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + + + +#ifndef final_version +/* magic value written to SWSUPPORT0 reg. for detecting whether card is still + * present */ +#define HFA384X_MAGIC 0x8A32 +#endif + + +static u16 hfa384x_read_reg(struct net_device *dev, u16 reg) +{ + return HFA384X_INW(reg); +} + + +static void hfa384x_read_regs(struct net_device *dev, + struct hfa384x_regs *regs) +{ + regs->cmd = HFA384X_INW(HFA384X_CMD_OFF); + regs->evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + regs->offset0 = HFA384X_INW(HFA384X_OFFSET0_OFF); + regs->offset1 = HFA384X_INW(HFA384X_OFFSET1_OFF); + regs->swsupport0 = HFA384X_INW(HFA384X_SWSUPPORT0_OFF); +} + + +/** + * __hostap_cmd_queue_free - Free Prism2 command queue entry (private) + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Internal helper function for freeing Prism2 command queue entries. + * Caller must have acquired local->cmdlock before calling this function. + */ +static inline void __hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + if (del_req) { + entry->del_req = 1; + if (!list_empty(&entry->list)) { + list_del_init(&entry->list); + local->cmd_queue_len--; + } + } + + if (atomic_dec_and_test(&entry->usecnt) && entry->del_req) + kfree(entry); +} + + +/** + * hostap_cmd_queue_free - Free Prism2 command queue entry + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Free a Prism2 command queue entry. + */ +static inline void hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + unsigned long flags; + + spin_lock_irqsave(&local->cmdlock, flags); + __hostap_cmd_queue_free(local, entry, del_req); + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries + * @local: pointer to private Host AP driver data + */ +static void prism2_clear_cmd_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + unsigned long flags; + struct hostap_cmd_queue *entry; + + spin_lock_irqsave(&local->cmdlock, flags); + list_for_each_safe(ptr, n, &local->cmd_queue) { + entry = list_entry(ptr, struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + printk(KERN_DEBUG "%s: removed pending cmd_queue entry " + "(type=%d, cmd=0x%04x, param0=0x%04x)\n", + local->dev->name, entry->type, entry->cmd, + entry->param0); + __hostap_cmd_queue_free(local, entry, 1); + } + if (local->cmd_queue_len) { + /* This should not happen; print debug message and clear + * queue length. */ + printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " + "flush\n", local->dev->name, local->cmd_queue_len); + local->cmd_queue_len = 0; + } + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * hfa384x_cmd_issue - Issue a Prism2 command to the hardware + * @dev: pointer to net_device + * @entry: Prism2 command queue entry to be issued + */ +static inline int hfa384x_cmd_issue(struct net_device *dev, + struct hostap_cmd_queue *entry) +{ + struct hostap_interface *iface; + local_info_t *local; + int tries; + u16 reg; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->card_present && !local->func->card_present(local)) + return -ENODEV; + + if (entry->issued) { + printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", + dev->name, entry); + } + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } +#ifndef final_version + if (tries != HFA384X_CMD_BUSY_TIMEOUT) { + prism2_io_debug_error(dev, 1); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " + "for %d usec\n", dev->name, + HFA384X_CMD_BUSY_TIMEOUT - tries); + } +#endif + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, 2); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + /* write command */ + spin_lock_irqsave(&local->cmdlock, flags); + HFA384X_OUTW(entry->param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(entry->param1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(entry->cmd, HFA384X_CMD_OFF); + entry->issued = 1; + spin_unlock_irqrestore(&local->cmdlock, flags); + + return 0; +} + + +/** + * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @param1: value for Param1 register (pointer; %NULL if not used) + * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed + * + * Issue given command (possibly after waiting in command queue) and sleep + * until the command is completed (or timed out or interrupted). This can be + * called only from user process context. + */ +static int hfa384x_cmd(struct net_device *dev, u16 cmd, u16 param0, + u16 *param1, u16 *resp0) +{ + struct hostap_interface *iface; + local_info_t *local; + int err, res, issue, issued = 0; + unsigned long flags; + struct hostap_cmd_queue *entry; + DECLARE_WAITQUEUE(wait, current); + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt " + "context\n", dev->name); + return -1; + } + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + if (signal_pending(current)) + return -EINTR; + + entry = (struct hostap_cmd_queue *) + kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) { + printk(KERN_DEBUG "%s: hfa384x_cmd - kmalloc failed\n", + dev->name); + return -ENOMEM; + } + memset(entry, 0, sizeof(*entry)); + atomic_set(&entry->usecnt, 1); + entry->type = CMD_SLEEP; + entry->cmd = cmd; + entry->param0 = param0; + if (param1) + entry->param1 = *param1; + init_waitqueue_head(&entry->compl); + + /* prepare to wait for command completion event, but do not sleep yet + */ + add_wait_queue(&entry->compl, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + err = 0; + if (!issue) + goto wait_completion; + + if (signal_pending(current)) + err = -EINTR; + + if (!err) { + if (hfa384x_cmd_issue(dev, entry)) + err = -ETIMEDOUT; + else + issued = 1; + } + + wait_completion: + if (!err && entry->type != CMD_COMPLETED) { + /* sleep until command is completed or timed out */ + res = schedule_timeout(2 * HZ); + } else + res = -1; + + if (!err && signal_pending(current)) + err = -EINTR; + + if (err && issued) { + /* the command was issued, so a CmdCompl event should occur + * soon; however, there's a pending signal and + * schedule_timeout() would be interrupted; wait a short period + * of time to avoid removing entry from the list before + * CmdCompl event */ + udelay(300); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&entry->compl, &wait); + + /* If entry->list is still in the list, it must be removed + * first and in this case prism2_cmd_ev() does not yet have + * local reference to it, and the data can be kfree()'d + * here. If the command completion event is still generated, + * it will be assigned to next (possibly) pending command, but + * the driver will reset the card anyway due to timeout + * + * If the entry is not in the list prism2_cmd_ev() has a local + * reference to it, but keeps cmdlock as long as the data is + * needed, so the data can be kfree()'d here. */ + + /* FIX: if the entry->list is in the list, it has not been completed + * yet, so removing it here is somewhat wrong.. this could cause + * references to freed memory and next list_del() causing NULL pointer + * dereference.. it would probably be better to leave the entry in the + * list and the list should be emptied during hw reset */ + + spin_lock_irqsave(&local->cmdlock, flags); + if (!list_empty(&entry->list)) { + printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " + "(entry=%p, type=%d, res=%d)\n", dev->name, entry, + entry->type, res); + list_del_init(&entry->list); + local->cmd_queue_len--; + } + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (err) { + printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", + dev->name, err); + res = err; + goto done; + } + + if (entry->type != CMD_COMPLETED) { + u16 reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " + "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, " + "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev->name, + res, entry, entry->type, entry->cmd, entry->param0, reg, + HFA384X_INW(HFA384X_INTEN_OFF)); + if (reg & HFA384X_EV_CMD) { + /* Command completion event is pending, but the + * interrupt was not delivered - probably an issue + * with pcmcia-cs configuration. */ + printk(KERN_WARNING "%s: interrupt delivery does not " + "seem to work\n", dev->name); + } + prism2_io_debug_error(dev, 3); + res = -ETIMEDOUT; + goto done; + } + + if (resp0 != NULL) + *resp0 = entry->resp0; +#ifndef final_version + if (entry->res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " + "resp0=0x%04x\n", + dev->name, cmd, entry->res, entry->resp0); + } +#endif /* final_version */ + + res = entry->res; + done: + hostap_cmd_queue_free(local, entry, 1); + return res; +} + + +/** + * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @callback: command completion callback function (%NULL = no callback) + * @context: data pointer to be given to callback function + * + * Issue given command (possibly after waiting in command queue) and use + * callback function to indicate command completion. This can be called both + * from user and interrupt context. The callback function will be called in + * hardware IRQ context. It can be %NULL, when no function is called when + * command is completed. + */ +static int hfa384x_cmd_callback(struct net_device *dev, u16 cmd, u16 param0, + void (*callback)(struct net_device *dev, + void *context, u16 resp0, + u16 status), + void *context) +{ + struct hostap_interface *iface; + local_info_t *local; + int issue, ret; + unsigned long flags; + struct hostap_cmd_queue *entry; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN + 2) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + entry = (struct hostap_cmd_queue *) + kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) { + printk(KERN_DEBUG "%s: hfa384x_cmd_callback - kmalloc " + "failed\n", dev->name); + return -ENOMEM; + } + memset(entry, 0, sizeof(*entry)); + atomic_set(&entry->usecnt, 1); + entry->type = CMD_CALLBACK; + entry->cmd = cmd; + entry->param0 = param0; + entry->callback = callback; + entry->context = context; + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (issue && hfa384x_cmd_issue(dev, entry)) + ret = -ETIMEDOUT; + else + ret = 0; + + hostap_cmd_queue_free(local, entry, ret); + + return ret; +} + + +/** + * __hfa384x_cmd_no_wait - Issue a Prism2 command (private) + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @io_debug_num: I/O debug error number + * + * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait(). + */ +static int __hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, u16 param0, + int io_debug_num) +{ + int tries; + u16 reg; + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, io_debug_num); + printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " + "reg=0x%04x\n", dev->name, io_debug_num, reg); + return -ETIMEDOUT; + } + + /* write command */ + HFA384X_OUTW(param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(cmd, HFA384X_CMD_OFF); + + return 0; +} + + +/** + * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static int hfa384x_cmd_wait(struct net_device *dev, u16 cmd, u16 param0) +{ + int res, tries; + u16 reg; + + res = __hfa384x_cmd_no_wait(dev, cmd, param0, 4); + if (res) + return res; + + /* wait for command completion */ + if ((cmd & HFA384X_CMDCODE_MASK) == HFA384X_CMDCODE_DOWNLOAD) + tries = HFA384X_DL_COMPL_TIMEOUT; + else + tries = HFA384X_CMD_COMPL_TIMEOUT; + + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + tries > 0) { + tries--; + udelay(10); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + prism2_io_debug_error(dev, 5); + printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) | + BIT(8))) >> 8; +#ifndef final_version + if (res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", + dev->name, cmd, res); + } +#endif + + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + return res; +} + + +/** + * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static inline int hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, + u16 param0) +{ + return __hfa384x_cmd_no_wait(dev, cmd, param0, 6); +} + + +/** + * prism2_cmd_ev - Prism2 command completion event handler + * @dev: pointer to net_device + * + * Interrupt handler for command completion events. Called by the main + * interrupt handler in hardware IRQ context. Read Resp0 and status registers + * from the hardware and ACK the event. Depending on the issued command type + * either wake up the sleeping process that is waiting for command completion + * or call the callback function. Issue the next command, if one is pending. + */ +static void prism2_cmd_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hostap_cmd_queue *entry = NULL; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + list_del_init(&entry->list); + local->cmd_queue_len--; + + if (!entry->issued) { + printk(KERN_DEBUG "%s: Command completion event, but " + "cmd not issued\n", dev->name); + __hostap_cmd_queue_free(local, entry, 1); + entry = NULL; + } + } + spin_unlock(&local->cmdlock); + + if (!entry) { + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: Command completion event, but no " + "pending commands\n", dev->name); + return; + } + + entry->resp0 = HFA384X_INW(HFA384X_RESP0_OFF); + entry->res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | + BIT(9) | BIT(8))) >> 8; + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + /* TODO: rest of the CmdEv handling could be moved to tasklet */ + if (entry->type == CMD_SLEEP) { + entry->type = CMD_COMPLETED; + wake_up_interruptible(&entry->compl); + } else if (entry->type == CMD_CALLBACK) { + if (entry->callback) + entry->callback(dev, entry->context, entry->resp0, + entry->res); + } else { + printk(KERN_DEBUG "%s: Invalid command completion type %d\n", + dev->name, entry->type); + } + hostap_cmd_queue_free(local, entry, 1); + + /* issue next command, if pending */ + entry = NULL; + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + if (entry->issuing) { + /* hfa384x_cmd() has already started issuing this + * command, so do not start here */ + entry = NULL; + } + if (entry) + atomic_inc(&entry->usecnt); + } + spin_unlock(&local->cmdlock); + + if (entry) { + /* issue next command; if command issuing fails, remove the + * entry from cmd_queue */ + int res = hfa384x_cmd_issue(dev, entry); + spin_lock(&local->cmdlock); + __hostap_cmd_queue_free(local, entry, res); + spin_unlock(&local->cmdlock); + } +} + + +static inline int hfa384x_wait_offset(struct net_device *dev, u16 o_off) +{ + int tries = HFA384X_BAP_BUSY_TIMEOUT; + int res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + + while (res && tries > 0) { + tries--; + udelay(1); + res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + } + return res; +} + + +/* Offset must be even */ +static int hfa384x_setup_bap(struct net_device *dev, u16 bap, u16 id, + int offset) +{ + u16 o_off, s_off; + int ret = 0; + + if (offset % 2 || bap > 1) + return -EINVAL; + + if (bap == BAP1) { + o_off = HFA384X_OFFSET1_OFF; + s_off = HFA384X_SELECT1_OFF; + } else { + o_off = HFA384X_OFFSET0_OFF; + s_off = HFA384X_SELECT0_OFF; + } + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 7); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } + + HFA384X_OUTW(id, s_off); + HFA384X_OUTW(offset, o_off); + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 8); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } +#ifndef final_version + if (HFA384X_INW(o_off) & HFA384X_OFFSET_ERR) { + prism2_io_debug_error(dev, 9); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " + "(%d,0x04%x,%d); reg=0x%04x\n", + dev->name, bap, id, offset, HFA384X_INW(o_off)); + ret = -EINVAL; + } +#endif + + out: + return ret; +} + + +static int hfa384x_get_rid(struct net_device *dev, u16 rid, void *buf, int len, + int exact_len) +{ + struct hostap_interface *iface; + local_info_t *local; + int res, rlen = 0; + struct hfa384x_rid_hdr rec; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + res = down_interruptible(&local->rid_bap_sem); + if (res) + return res; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS, rid, NULL, NULL); + if (res) { + printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " + "(res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + up(&local->rid_bap_sem); + return res; + } + + spin_lock_bh(&local->baplock); + + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rec, sizeof(rec)); + + if (le16_to_cpu(rec.len) == 0) { + /* RID not available */ + res = -ENODATA; + } + + rlen = (le16_to_cpu(rec.len) - 1) * 2; + if (!res && exact_len && rlen != len) { + printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " + "rid=0x%04x, len=%d (expected %d)\n", + dev->name, rid, rlen, len); + res = -ENODATA; + } + + if (!res) + res = hfa384x_from_bap(dev, BAP0, buf, len); + + spin_unlock_bh(&local->baplock); + up(&local->rid_bap_sem); + + if (res) { + if (res != -ENODATA) + printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " + "len=%d) - failed - res=%d\n", dev->name, rid, + len, res); + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + return res; + } + + return rlen; +} + + +static int hfa384x_set_rid(struct net_device *dev, u16 rid, void *buf, int len) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_rid_hdr rec; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + rec.rid = cpu_to_le16(rid); + /* RID len in words and +1 for rec.rid */ + rec.len = cpu_to_le16(len / 2 + len % 2 + 1); + + res = down_interruptible(&local->rid_bap_sem); + if (res) + return res; + + spin_lock_bh(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_to_bap(dev, BAP0, &rec, sizeof(rec)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, buf, len); + spin_unlock_bh(&local->baplock); + + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " + "failed - res=%d\n", dev->name, rid, len, res); + up(&local->rid_bap_sem); + return res; + } + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS_WRITE, rid, NULL, NULL); + up(&local->rid_bap_sem); + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " + "failed (res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + return res; + } + + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + + return res; +} + + +static void hfa384x_disable_interrupts(struct net_device *dev) +{ + /* disable interrupts and clear event status */ + HFA384X_OUTW(0, HFA384X_INTEN_OFF); + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); +} + + +static void hfa384x_enable_interrupts(struct net_device *dev) +{ + /* ack pending events and enable interrupts from selected events */ + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_no_bap0(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK & ~HFA384X_BAP0_EVENTS, + HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_all(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_only_cmd(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_INTEN_OFF); +} + + +static u16 hfa384x_allocate_fid(struct net_device *dev, int len) +{ + u16 fid; + unsigned long delay; + + /* FIX: this could be replace with hfa384x_cmd() if the Alloc event + * below would be handled like CmdCompl event (sleep here, wake up from + * interrupt handler */ + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_ALLOC, len)) { + printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", + dev->name, len); + return 0xffff; + } + + delay = jiffies + HFA384X_ALLOC_COMPL_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC)) { + printk("%s: fid allocate, len=%d - timeout\n", dev->name, len); + return 0xffff; + } + + fid = HFA384X_INW(HFA384X_ALLOCFID_OFF); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + + return fid; +} + + +static int prism2_reset_port(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (!local->dev_enabled) + return 0; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to disable port\n", + dev->name); + else { + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to enable " + "port\n", dev->name); + } + + /* It looks like at least some STA firmware versions reset + * fragmentation threshold back to 2346 after enable command. Restore + * the configured value, if it differs from this default. */ + if (local->fragm_threshold != 2346 && + hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_DEBUG "%s: failed to restore fragmentation " + "threshold (%d) after Port0 enable\n", + dev->name, local->fragm_threshold); + } + + return res; +} + + +static int prism2_get_version_info(struct net_device *dev, u16 rid, + const char *txt) +{ + struct hfa384x_comp_ident comp; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + /* PRI f/w not yet available - cannot read RIDs */ + return -1; + } + if (hfa384x_get_rid(dev, rid, &comp, sizeof(comp), 1) < 0) { + printk(KERN_DEBUG "Could not get RID for component %s\n", txt); + return -1; + } + + printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt, + __le16_to_cpu(comp.id), __le16_to_cpu(comp.major), + __le16_to_cpu(comp.minor), __le16_to_cpu(comp.variant)); + return 0; +} + + +static int prism2_setup_rids(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 tmp; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + hostap_set_word(dev, HFA384X_RID_TICKTIME, 2000); + + if (!local->fw_ap) { + tmp = hostap_get_porttype(local); + ret = hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, tmp); + if (ret) { + printk("%s: Port type setting to %d failed\n", + dev->name, tmp); + goto fail; + } + } + + /* Setting SSID to empty string seems to kill the card in Host AP mode + */ + if (local->iw_mode != IW_MODE_MASTER || local->essid[0] != '\0') { + ret = hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, + local->essid); + if (ret) { + printk("%s: AP own SSID setting failed\n", dev->name); + goto fail; + } + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFMAXDATALEN, + PRISM2_DATA_MAXLEN); + if (ret) { + printk("%s: MAC data length setting to %d failed\n", + dev->name, PRISM2_DATA_MAXLEN); + goto fail; + } + + if (hfa384x_get_rid(dev, HFA384X_RID_CHANNELLIST, &tmp, 2, 1) < 0) { + printk("%s: Channel list read failed\n", dev->name); + ret = -EINVAL; + goto fail; + } + local->channel_mask = __le16_to_cpu(tmp); + + if (local->channel < 1 || local->channel > 14 || + !(local->channel_mask & (1 << (local->channel - 1)))) { + printk(KERN_WARNING "%s: Channel setting out of range " + "(%d)!\n", dev->name, local->channel); + ret = -EBUSY; + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel); + if (ret) { + printk("%s: Channel setting to %d failed\n", + dev->name, local->channel); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, + local->beacon_int); + if (ret) { + printk("%s: Beacon interval setting to %d failed\n", + dev->name, local->beacon_int); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, + local->dtim_period); + if (ret) { + printk("%s: DTIM period setting to %d failed\n", + dev->name, local->dtim_period); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc); + if (ret) + printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n", + dev->name, local->is_promisc); + + if (!local->fw_ap) { + ret = hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, + local->essid); + if (ret) { + printk("%s: Desired SSID setting failed\n", dev->name); + goto fail; + } + } + + /* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and + * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic + * rates */ + if (local->tx_rate_control == 0) { + local->tx_rate_control = + HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | + HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + } + if (local->basic_rates == 0) + local->basic_rates = HFA384X_RATES_1MBPS | HFA384X_RATES_2MBPS; + + if (!local->fw_ap) { + ret = hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, + local->tx_rate_control); + if (ret) { + printk("%s: TXRateControl setting to %d failed\n", + dev->name, local->tx_rate_control); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, + local->tx_rate_control); + if (ret) { + printk("%s: cnfSupportedRates setting to %d failed\n", + dev->name, local->tx_rate_control); + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + local->basic_rates); + if (ret) { + printk("%s: cnfBasicRates setting to %d failed\n", + dev->name, local->basic_rates); + } + + ret = hostap_set_word(dev, HFA384X_RID_CREATEIBSS, 1); + if (ret) { + printk("%s: Create IBSS setting to 1 failed\n", + dev->name); + } + } + + if (local->name_set) + (void) hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, + local->name); + + if (hostap_set_encryption(local)) { + printk(KERN_INFO "%s: could not configure encryption\n", + dev->name); + } + + (void) hostap_set_antsel(local); + + if (hostap_set_roaming(local)) { + printk(KERN_INFO "%s: could not set host roaming\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,6,3) && + hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, local->enh_sec)) + printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n", + dev->name, local->enh_sec); + + /* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently + * not working correctly (last seven counters report bogus values). + * This has been fixed in 0.8.2, so enable 32-bit tallies only + * beginning with that firmware version. Another bug fix for 32-bit + * tallies in 1.4.0; should 16-bit tallies be used for some other + * versions, too? */ + if (local->sta_fw_ver >= PRISM2_FW_VER(0,8,2)) { + if (hostap_set_word(dev, HFA384X_RID_CNFTHIRTY2TALLY, 1)) { + printk(KERN_INFO "%s: cnfThirty2Tally setting " + "failed\n", dev->name); + local->tallies32 = 0; + } else + local->tallies32 = 1; + } else + local->tallies32 = 0; + + hostap_set_auth_algs(local); + + if (hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_INFO "%s: setting FragmentationThreshold to %d " + "failed\n", dev->name, local->fragm_threshold); + } + + if (hostap_set_word(dev, HFA384X_RID_RTSTHRESHOLD, + local->rts_threshold)) { + printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n", + dev->name, local->rts_threshold); + } + + if (local->manual_retry_count >= 0 && + hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, + local->manual_retry_count)) { + printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n", + dev->name, local->manual_retry_count); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1) && + hfa384x_get_rid(dev, HFA384X_RID_CNFDBMADJUST, &tmp, 2, 1) == 2) { + local->rssi_to_dBm = le16_to_cpu(tmp); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->wpa && + hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1)) { + printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->generic_elem && + hfa384x_set_rid(dev, HFA384X_RID_GENERICELEMENT, + local->generic_elem, local->generic_elem_len)) { + printk(KERN_INFO "%s: setting genericElement failed\n", + dev->name); + } + + fail: + return ret; +} + + +static int prism2_hw_init(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret, first = 1; + unsigned long start, delay; + + PDEBUG(DEBUG_FLOW, "prism2_hw_init()\n"); + + iface = netdev_priv(dev); + local = iface->local; + + clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits); + + init: + /* initialize HFA 384x */ + ret = hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_INIT, 0); + if (ret) { + printk(KERN_INFO "%s: first command failed - assuming card " + "does not have primary firmware\n", dev_info); + } + + if (first && (HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + /* EvStat has Cmd bit set in some cases, so retry once if no + * wait was needed */ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: init command completed too quickly - " + "retrying\n", dev->name); + first = 0; + goto init; + } + + start = jiffies; + delay = jiffies + HFA384X_INIT_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + printk(KERN_DEBUG "%s: assuming no Primary image in " + "flash - card initialization not completed\n", + dev_info); + local->no_pri = 1; +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->sram_type == -1) + local->sram_type = prism2_get_ram_size(local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + return 1; + } + local->no_pri = 0; + printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", + (jiffies - start) * 1000 / HZ); + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + return 0; +} + + +static int prism2_hw_init2(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int i; + + iface = netdev_priv(dev); + local = iface->local; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + kfree(local->pda); + if (local->no_pri) + local->pda = NULL; + else + local->pda = prism2_read_pda(dev); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + hfa384x_disable_interrupts(dev); + +#ifndef final_version + HFA384X_OUTW(HFA384X_MAGIC, HFA384X_SWSUPPORT0_OFF); + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + printk("SWSUPPORT0 write/read failed: %04X != %04X\n", + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), HFA384X_MAGIC); + goto failed; + } +#endif + + if (initial || local->pri_only) { + hfa384x_events_only_cmd(dev); + /* get card version information */ + if (prism2_get_version_info(dev, HFA384X_RID_NICID, "NIC") || + prism2_get_version_info(dev, HFA384X_RID_PRIID, "PRI")) { + hfa384x_disable_interrupts(dev); + goto failed; + } + + if (prism2_get_version_info(dev, HFA384X_RID_STAID, "STA")) { + printk(KERN_DEBUG "%s: Failed to read STA f/w version " + "- only Primary f/w present\n", dev->name); + local->pri_only = 1; + return 0; + } + local->pri_only = 0; + hfa384x_disable_interrupts(dev); + } + + /* FIX: could convert allocate_fid to use sleeping CmdCompl wait and + * enable interrupts before this. This would also require some sort of + * sleeping AllocEv waiting */ + + /* allocate TX FIDs */ + local->txfid_len = PRISM2_TXFID_LEN; + for (i = 0; i < PRISM2_TXFID_COUNT; i++) { + local->txfid[i] = hfa384x_allocate_fid(dev, local->txfid_len); + if (local->txfid[i] == 0xffff && local->txfid_len > 1600) { + local->txfid[i] = hfa384x_allocate_fid(dev, 1600); + if (local->txfid[i] != 0xffff) { + printk(KERN_DEBUG "%s: Using shorter TX FID " + "(1600 bytes)\n", dev->name); + local->txfid_len = 1600; + } + } + if (local->txfid[i] == 0xffff) + goto failed; + local->intransmitfid[i] = PRISM2_TXFID_EMPTY; + } + + hfa384x_events_only_cmd(dev); + + if (initial) { + struct list_head *ptr; + prism2_check_sta_fw_version(local); + + if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR, + &dev->dev_addr, 6, 1) < 0) { + printk("%s: could not get own MAC address\n", + dev->name); + } + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + memcpy(iface->dev->dev_addr, dev->dev_addr, ETH_ALEN); + } + } else if (local->fw_ap) + prism2_check_sta_fw_version(local); + + prism2_setup_rids(dev); + + /* MAC is now configured, but port 0 is not yet enabled */ + return 0; + + failed: + if (!local->no_pri) + printk(KERN_WARNING "%s: Initialization failed\n", dev_info); + return 1; +} + + +static int prism2_hw_enable(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int was_resetting; + + iface = netdev_priv(dev); + local = iface->local; + was_resetting = local->hw_resetting; + + if (hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, NULL)) { + printk("%s: MAC port 0 enabling failed\n", dev->name); + return 1; + } + + local->hw_ready = 1; + local->hw_reset_tries = 0; + local->hw_resetting = 0; + hfa384x_enable_interrupts(dev); + + /* at least D-Link DWL-650 seems to require additional port reset + * before it starts acting as an AP, so reset port automatically + * here just in case */ + if (initial && prism2_reset_port(dev)) { + printk("%s: MAC port 0 reseting failed\n", dev->name); + return 1; + } + + if (was_resetting && netif_queue_stopped(dev)) { + /* If hw_reset() was called during pending transmit, netif + * queue was stopped. Wake it up now since the wlan card has + * been resetted. */ + netif_wake_queue(dev); + } + + return 0; +} + + +static int prism2_hw_config(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->hw_downloading) + return 1; + + if (prism2_hw_init(dev, initial)) { + return local->no_pri ? 0 : 1; + } + + if (prism2_hw_init2(dev, initial)) + return 1; + + /* Enable firmware if secondary image is loaded and at least one of the + * netdevices is up. */ + if (!local->pri_only && + (initial == 0 || (initial == 2 && local->num_dev_open > 0))) { + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + return prism2_hw_enable(dev, initial); + } + + return 0; +} + + +static void prism2_hw_shutdown(struct net_device *dev, int no_disable) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* Allow only command completion events during disable */ + hfa384x_events_only_cmd(dev); + + local->hw_ready = 0; + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + local->dev_enabled = 0; + + if (local->func->card_present && !local->func->card_present(local)) { + printk(KERN_DEBUG "%s: card already removed or not configured " + "during shutdown\n", dev->name); + return; + } + + if ((no_disable & HOSTAP_HW_NO_DISABLE) == 0 && + hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, NULL)) + printk(KERN_WARNING "%s: Shutdown failed\n", dev_info); + + hfa384x_disable_interrupts(dev); + + if (no_disable & HOSTAP_HW_ENABLE_CMDCOMPL) + hfa384x_events_only_cmd(dev); + else + prism2_clear_cmd_queue(local); +} + + +static void prism2_hw_reset(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + +#if 0 + static long last_reset = 0; + + /* do not reset card more than once per second to avoid ending up in a + * busy loop reseting the card */ + if (time_before_eq(jiffies, last_reset + HZ)) + return; + last_reset = jiffies; +#endif + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called " + "in interrupt context\n", dev->name); + return; + } + + if (local->hw_downloading) + return; + + if (local->hw_resetting) { + printk(KERN_WARNING "%s: %s: already resetting card - " + "ignoring reset request\n", dev_info, dev->name); + return; + } + + local->hw_reset_tries++; + if (local->hw_reset_tries > 10) { + printk(KERN_WARNING "%s: too many reset tries, skipping\n", + dev->name); + return; + } + + printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name); + hfa384x_disable_interrupts(dev); + local->hw_resetting = 1; + if (local->func->cor_sreset) { + /* Host system seems to hang in some cases with high traffic + * load or shared interrupts during COR sreset. Disable shared + * interrupts during reset to avoid these crashes. COS sreset + * takes quite a long time, so it is unfortunate that this + * seems to be needed. Anyway, I do not know of any better way + * of avoiding the crash. */ + disable_irq(dev->irq); + local->func->cor_sreset(local); + enable_irq(dev->irq); + } + prism2_hw_shutdown(dev, 1); + prism2_hw_config(dev, 0); + local->hw_resetting = 0; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->dl_pri) { + printk(KERN_DEBUG "%s: persistent download of primary " + "firmware\n", dev->name); + if (prism2_download_genesis(local, local->dl_pri) < 0) + printk(KERN_WARNING "%s: download (PRI) failed\n", + dev->name); + } + + if (local->dl_sec) { + printk(KERN_DEBUG "%s: persistent download of secondary " + "firmware\n", dev->name); + if (prism2_download_volatile(local, local->dl_sec) < 0) + printk(KERN_WARNING "%s: download (SEC) failed\n", + dev->name); + } +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + /* TODO: restore beacon TIM bits for STAs that have buffered frames */ +} + + +static void prism2_schedule_reset(local_info_t *local) +{ + schedule_work(&local->reset_queue); +} + + +/* Called only as scheduled task after noticing card timeout in interrupt + * context */ +static void handle_reset_queue(void *data) +{ + local_info_t *local = (local_info_t *) data; + + printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); + prism2_hw_reset(local->dev); + + if (netif_queue_stopped(local->dev)) { + int i; + + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + if (local->intransmitfid[i] == PRISM2_TXFID_EMPTY) { + PDEBUG(DEBUG_EXTRA, "prism2_tx_timeout: " + "wake up queue\n"); + netif_wake_queue(local->dev); + break; + } + } +} + + +static int prism2_get_txfid_idx(local_info_t *local) +{ + int idx, end; + unsigned long flags; + + spin_lock_irqsave(&local->txfidlock, flags); + end = idx = local->next_txfid; + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + local->intransmitfid[idx] = PRISM2_TXFID_RESERVED; + spin_unlock_irqrestore(&local->txfidlock, flags); + return idx; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != end); + spin_unlock_irqrestore(&local->txfidlock, flags); + + PDEBUG(DEBUG_EXTRA2, "prism2_get_txfid_idx: no room in txfid buf: " + "packet dropped\n"); + local->stats.tx_dropped++; + + return -1; +} + + +/* Called only from hardware IRQ */ +static void prism2_transmit_cb(struct net_device *dev, void *context, + u16 resp0, u16 res) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx = (int) context; + + iface = netdev_priv(dev); + local = iface->local; + + if (res) { + printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", + dev->name, res); + return; + } + + if (idx < 0 || idx >= PRISM2_TXFID_COUNT) { + printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " + "idx=%d\n", dev->name, idx); + return; + } + + if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " + "with no pending transmit\n", dev->name); + } + + if (netif_queue_stopped(dev)) { + /* ready for next TX, so wake up queue that was stopped in + * prism2_transmit() */ + netif_wake_queue(dev); + } + + spin_lock(&local->txfidlock); + + /* With reclaim, Resp0 contains new txfid for transmit; the old txfid + * will be automatically allocated for the next TX frame */ + local->intransmitfid[idx] = resp0; + + PDEBUG(DEBUG_FID, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, " + "resp0=0x%04x, transmit_txfid=0x%04x\n", + dev->name, idx, local->txfid[idx], + resp0, local->intransmitfid[local->next_txfid]); + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + local->next_txfid = idx; + + /* check if all TX buffers are occupied */ + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + spin_unlock(&local->txfidlock); + return; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_txfid); + spin_unlock(&local->txfidlock); + + /* no empty TX buffers, stop queue */ + netif_stop_queue(dev); +} + + +/* Called only from software IRQ if PCI bus master is not used (with bus master + * this can be called both from software and hardware IRQ) */ +static int prism2_transmit(struct net_device *dev, int idx) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + /* The driver tries to stop netif queue so that there would not be + * more than one attempt to transmit frames going on; check that this + * is really the case */ + + if (test_and_set_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " + "when previous TX was pending\n", dev->name); + return -1; + } + + /* stop the queue for the time that transmit is pending */ + netif_stop_queue(dev); + + /* transmit packet */ + res = hfa384x_cmd_callback( + dev, + HFA384X_CMDCODE_TRANSMIT | HFA384X_CMD_TX_RECLAIM, + local->txfid[idx], + prism2_transmit_cb, (void *) idx); + + if (res) { + struct net_device_stats *stats; + printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " + "failed (res=%d)\n", dev->name, res); + stats = hostap_get_stats(dev); + stats->tx_dropped++; + netif_wake_queue(dev); + return -1; + } + dev->trans_start = jiffies; + + /* Since we did not wait for command completion, the card continues + * to process on the background and we will finish handling when + * command completion event is handled (prism2_cmd_ev() function) */ + + return 0; +} + + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) +/* Called only from hardware IRQ */ +static void prism2_tx_cb(struct net_device *dev, void *context, + u16 resp0, u16 res) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long addr; + int buf_len = (int) context; + + iface = netdev_priv(dev); + local = iface->local; + + if (res) { + printk(KERN_DEBUG "%s: prism2_tx_cb - res=0x%02x\n", + dev->name, res); + return; + } + + addr = virt_to_phys(local->bus_m0_buf); + HFA384X_OUTW((addr & 0xffff0000) >> 16, HFA384X_PCI_M0_ADDRH_OFF); + HFA384X_OUTW(addr & 0x0000ffff, HFA384X_PCI_M0_ADDRL_OFF); + HFA384X_OUTW(buf_len / 2, HFA384X_PCI_M0_LEN_OFF); + HFA384X_OUTW(HFA384X_PCI_CTL_TO_BAP, HFA384X_PCI_M0_CTL_OFF); +} +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + +/* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and + * send the payload with this descriptor) */ +/* Called only from software IRQ */ +static int prism2_tx_80211(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_tx_frame txdesc; + struct hostap_ieee80211_hdr *hdr; + struct hostap_skb_tx_data *meta; + int hdr_len, data_len, idx, res, ret = -1; + u16 tx_control, fc; + + iface = netdev_priv(dev); + local = iface->local; + + meta = (struct hostap_skb_tx_data *) skb->cb; + hdr = (struct hostap_ieee80211_hdr *) skb->data; + + prism2_callback(local, PRISM2_CALLBACK_TX_START); + + if ((local->func->card_present && !local->func->card_present(local)) || + !local->hw_ready || local->hw_downloading || local->pri_only) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" + " skipping\n", dev->name); + } + goto fail; + } + + memset(&txdesc, 0, sizeof(txdesc)); + + /* skb->data starts with txdesc->frame_control */ + hdr_len = 24; + memcpy(&txdesc.frame_control, skb->data, hdr_len); + fc = le16_to_cpu(txdesc.frame_control); + if (WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_DATA && + (fc & WLAN_FC_FROMDS) && (fc & WLAN_FC_TODS) && skb->len >= 30) { + /* Addr4 */ + memcpy(txdesc.addr4, skb->data + hdr_len, ETH_ALEN); + hdr_len += ETH_ALEN; + } + + tx_control = local->tx_control; + if (meta->tx_cb_idx) { + tx_control |= HFA384X_TX_CTRL_TX_OK; + txdesc.sw_support = cpu_to_le16(meta->tx_cb_idx); + } + txdesc.tx_control = cpu_to_le16(tx_control); + txdesc.tx_rate = meta->rate; + + data_len = skb->len - hdr_len; + txdesc.data_len = cpu_to_le16(data_len); + txdesc.len = cpu_to_be16(data_len); + + idx = prism2_get_txfid_idx(local); + if (idx < 0) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) + hostap_dump_tx_header(dev->name, &txdesc); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, local->txfid[idx], 0); + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + if (!res && skb->len >= local->bus_master_threshold_tx) { + u8 *pos; + int buf_len; + + local->bus_m0_tx_idx = idx; + + /* FIX: BAP0 should be locked during bus master transfer, but + * baplock with BH's disabled is not OK for this; netif queue + * stopping is not enough since BAP0 is used also for RID + * read/write */ + + /* stop the queue for the time that bus mastering on BAP0 is + * in use */ + netif_stop_queue(dev); + + spin_unlock(&local->baplock); + + /* Copy frame data to bus_m0_buf */ + pos = local->bus_m0_buf; + memcpy(pos, &txdesc, sizeof(txdesc)); + pos += sizeof(txdesc); + memcpy(pos, skb->data + hdr_len, skb->len - hdr_len); + pos += skb->len - hdr_len; + buf_len = pos - local->bus_m0_buf; + if (buf_len & 1) + buf_len++; + +#ifdef PRISM2_ENABLE_BEFORE_TX_BUS_MASTER + /* Any RX packet seems to break something with TX bus + * mastering; enable command is enough to fix this.. */ + if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_ENABLE, 0, + prism2_tx_cb, (void *) buf_len)) { + printk(KERN_DEBUG "%s: TX: enable port0 failed\n", + dev->name); + } +#else /* PRISM2_ENABLE_BEFORE_TX_BUS_MASTER */ + prism2_tx_cb(dev, (void *) buf_len, 0, 0); +#endif /* PRISM2_ENABLE_BEFORE_TX_BUS_MASTER */ + + /* Bus master transfer will be started from command completion + * event handler and TX handling will be finished by calling + * prism2_transmit() from bus master event handler */ + goto tx_stats; + } +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + if (!res) + res = hfa384x_to_bap(dev, BAP0, &txdesc, sizeof(txdesc)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, skb->data + hdr_len, + skb->len - hdr_len); + spin_unlock(&local->baplock); + + if (!res) + res = prism2_transmit(dev, idx); + if (res) { + printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", + dev->name); + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + schedule_work(&local->reset_queue); + goto fail; + } + + ret = 0; + +fail: + prism2_callback(local, PRISM2_CALLBACK_TX_END); + return ret; +} + + +/* Some SMP systems have reported number of odd errors with hostap_pci. fid + * register has changed values between consecutive reads for an unknown reason. + * This should really not happen, so more debugging is needed. This test + * version is a big slower, but it will detect most of such register changes + * and will try to get the correct fid eventually. */ +#define EXTRA_FID_READ_TESTS + +static inline u16 prism2_read_fid_reg(struct net_device *dev, u16 reg) +{ +#ifdef EXTRA_FID_READ_TESTS + u16 val, val2, val3; + int i; + + for (i = 0; i < 10; i++) { + val = HFA384X_INW(reg); + val2 = HFA384X_INW(reg); + val3 = HFA384X_INW(reg); + + if (val == val2 && val == val3) + return val; + + printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" + " %04x %04x %04x\n", + dev->name, i, reg, val, val2, val3); + if ((val == val2 || val == val3) && val != 0) + return val; + if (val2 == val3 && val2 != 0) + return val2; + } + printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg " + "%04x (%04x %04x %04x)\n", dev->name, reg, val, val2, val3); + return val; +#else /* EXTRA_FID_READ_TESTS */ + return HFA384X_INW(reg); +#endif /* EXTRA_FID_READ_TESTS */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_rx(local_info_t *local) +{ + struct net_device *dev = local->dev; + int res, rx_pending = 0; + u16 len, hdr_len, rxfid, status, macport; + struct net_device_stats *stats; + struct hfa384x_rx_frame rxdesc; + struct sk_buff *skb = NULL; + + prism2_callback(local, PRISM2_CALLBACK_RX_START); + stats = hostap_get_stats(dev); + + rxfid = prism2_read_fid_reg(dev, HFA384X_RXFID_OFF); +#ifndef final_version + if (rxfid == 0) { + rxfid = HFA384X_INW(HFA384X_RXFID_OFF); + printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", + rxfid); + if (rxfid == 0) { + schedule_work(&local->reset_queue); + goto rx_dropped; + } + /* try to continue with the new rxfid value */ + } +#endif + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rxfid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rxdesc, sizeof(rxdesc)); + + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, + res); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto rx_dropped; + } + + len = le16_to_cpu(rxdesc.data_len); + hdr_len = sizeof(rxdesc); + status = le16_to_cpu(rxdesc.status); + macport = (status >> 8) & 0x07; + + /* Drop frames with too large reported payload length. Monitor mode + * seems to sometimes pass frames (e.g., ctrl::ack) with signed and + * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for + * macport 7 */ + if (len > PRISM2_DATA_MAXLEN + 8 /* WEP */) { + if (macport == 7 && local->iw_mode == IW_MODE_MONITOR) { + if (len >= (u16) -14) { + hdr_len -= 65535 - len; + hdr_len--; + } + len = 0; + } else { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received frame with invalid " + "length 0x%04x\n", dev->name, len); + hostap_dump_rx_header(dev->name, &rxdesc); + goto rx_dropped; + } + } + + skb = dev_alloc_skb(len + hdr_len); + if (!skb) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: RX failed to allocate skb\n", + dev->name); + goto rx_dropped; + } + skb->dev = dev; + memcpy(skb_put(skb, hdr_len), &rxdesc, hdr_len); + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + if (len >= local->bus_master_threshold_rx) { + unsigned long addr; + + hfa384x_events_no_bap1(dev); + + local->rx_skb = skb; + /* Internal BAP0 offset points to the byte following rxdesc; + * copy rest of the data using bus master */ + addr = virt_to_phys(skb_put(skb, len)); + HFA384X_OUTW((addr & 0xffff0000) >> 16, + HFA384X_PCI_M0_ADDRH_OFF); + HFA384X_OUTW(addr & 0x0000ffff, HFA384X_PCI_M0_ADDRL_OFF); + if (len & 1) + len++; + HFA384X_OUTW(len / 2, HFA384X_PCI_M0_LEN_OFF); + HFA384X_OUTW(HFA384X_PCI_CTL_FROM_BAP, HFA384X_PCI_M0_CTL_OFF); + + /* pci_bus_m1 event will be generated when data transfer is + * complete and the frame will then be added to rx_list and + * rx_tasklet is scheduled */ + rx_pending = 1; + + /* Have to release baplock before returning, although BAP0 + * should really not be used before DMA transfer has been + * completed. */ + spin_unlock(&local->baplock); + } else +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + { + if (len > 0) + res = hfa384x_from_bap(dev, BAP0, skb_put(skb, len), + len); + spin_unlock(&local->baplock); + if (res) { + printk(KERN_DEBUG "%s: RX failed to read " + "frame data\n", dev->name); + goto rx_dropped; + } + + skb_queue_tail(&local->rx_list, skb); + tasklet_schedule(&local->rx_tasklet); + } + + rx_exit: + prism2_callback(local, PRISM2_CALLBACK_RX_END); + if (!rx_pending) { + HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); + } + + return; + + rx_dropped: + stats->rx_dropped++; + if (skb) + dev_kfree_skb(skb); + goto rx_exit; +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_skb(local_info_t *local, struct sk_buff *skb) +{ + struct hfa384x_rx_frame *rxdesc; + struct net_device *dev = skb->dev; + struct hostap_80211_rx_status stats; + int hdrlen, rx_hdrlen; + + rx_hdrlen = sizeof(*rxdesc); + if (skb->len < sizeof(*rxdesc)) { + /* Allow monitor mode to receive shorter frames */ + if (local->iw_mode == IW_MODE_MONITOR && + skb->len >= sizeof(*rxdesc) - 30) { + rx_hdrlen = skb->len; + } else { + dev_kfree_skb(skb); + return; + } + } + + rxdesc = (struct hfa384x_rx_frame *) skb->data; + + if (local->frame_dump & PRISM2_DUMP_RX_HDR && + skb->len >= sizeof(*rxdesc)) + hostap_dump_rx_header(dev->name, rxdesc); + + if (le16_to_cpu(rxdesc->status) & HFA384X_RX_STATUS_FCSERR && + (!local->monitor_allow_fcserr || + local->iw_mode != IW_MODE_MONITOR)) + goto drop; + + if (skb->len > PRISM2_DATA_MAXLEN) { + printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", + dev->name, skb->len, PRISM2_DATA_MAXLEN); + goto drop; + } + + stats.mac_time = le32_to_cpu(rxdesc->time); + stats.signal = rxdesc->signal - local->rssi_to_dBm; + stats.noise = rxdesc->silence - local->rssi_to_dBm; + stats.rate = rxdesc->rate; + + /* Convert Prism2 RX structure into IEEE 802.11 header */ + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(rxdesc->frame_control)); + if (hdrlen > rx_hdrlen) + hdrlen = rx_hdrlen; + + memmove(skb_pull(skb, rx_hdrlen - hdrlen), + &rxdesc->frame_control, hdrlen); + + hostap_80211_rx(dev, skb, &stats); + return; + + drop: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->rx_list)) != NULL) + hostap_rx_skb(local, skb); +} + + +/* Called only from hardware IRQ */ +static void prism2_alloc_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx; + u16 fid; + + iface = netdev_priv(dev); + local = iface->local; + + fid = prism2_read_fid_reg(dev, HFA384X_ALLOCFID_OFF); + + PDEBUG(DEBUG_FID, "FID: interrupt: ALLOC - fid=0x%04x\n", fid); + + spin_lock(&local->txfidlock); + idx = local->next_alloc; + + do { + if (local->txfid[idx] == fid) { + PDEBUG(DEBUG_FID, "FID: found matching txfid[%d]\n", + idx); + +#ifndef final_version + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) + printk("Already released txfid found at idx " + "%d\n", idx); + if (local->intransmitfid[idx] == PRISM2_TXFID_RESERVED) + printk("Already reserved txfid found at idx " + "%d\n", idx); +#endif + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + idx++; + local->next_alloc = idx >= PRISM2_TXFID_COUNT ? 0 : + idx; + + if (!test_bit(HOSTAP_BITS_TRANSMIT, &local->bits) && + netif_queue_stopped(dev)) + netif_wake_queue(dev); + + spin_unlock(&local->txfidlock); + return; + } + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_alloc); + + printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new " + "read 0x%04x) for alloc event\n", dev->name, fid, + HFA384X_INW(HFA384X_ALLOCFID_OFF)); + printk(KERN_DEBUG "TXFIDs:"); + for (idx = 0; idx < PRISM2_TXFID_COUNT; idx++) + printk(" %04x[%04x]", local->txfid[idx], + local->intransmitfid[idx]); + printk("\n"); + spin_unlock(&local->txfidlock); + + /* FIX: should probably schedule reset; reference to one txfid was lost + * completely.. Bad things will happen if we run out of txfids + * Actually, this will cause netdev watchdog to notice TX timeout and + * then card reset after all txfids have been leaked. */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_tx_callback(local_info_t *local, + struct hfa384x_tx_frame *txdesc, int ok, + char *payload) +{ + u16 sw_support, hdrlen, len; + struct sk_buff *skb; + struct hostap_tx_callback_info *cb; + + /* Make sure that frame was from us. */ + if (memcmp(txdesc->addr2, local->dev->dev_addr, ETH_ALEN)) { + printk(KERN_DEBUG "%s: TX callback - foreign frame\n", + local->dev->name); + return; + } + + sw_support = le16_to_cpu(txdesc->sw_support); + + spin_lock(&local->lock); + cb = local->tx_callback; + while (cb != NULL && cb->idx != sw_support) + cb = cb->next; + spin_unlock(&local->lock); + + if (cb == NULL) { + printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", + local->dev->name, sw_support); + return; + } + + hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(txdesc->frame_control)); + len = le16_to_cpu(txdesc->data_len); + skb = dev_alloc_skb(hdrlen + len); + if (skb == NULL) { + printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " + "skb\n", local->dev->name); + return; + } + + memcpy(skb_put(skb, hdrlen), (void *) &txdesc->frame_control, hdrlen); + if (payload) + memcpy(skb_put(skb, len), payload, len); + + skb->dev = local->dev; + skb->mac.raw = skb->data; + + cb->func(skb, ok, cb->data); +} + + +/* Called only as a tasklet (software IRQ) */ +static int hostap_tx_compl_read(local_info_t *local, int error, + struct hfa384x_tx_frame *txdesc, + char **payload) +{ + u16 fid, len; + int res, ret = 0; + struct net_device *dev = local->dev; + + fid = prism2_read_fid_reg(dev, HFA384X_TXCOMPLFID_OFF); + + PDEBUG(DEBUG_FID, "interrupt: TX (err=%d) - fid=0x%04x\n", fid, error); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, txdesc, sizeof(*txdesc)); + if (res) { + PDEBUG(DEBUG_EXTRA, "%s: TX (err=%d) - fid=0x%04x - could not " + "read txdesc\n", dev->name, error, fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + ret = -1; + goto fail; + } + if (txdesc->sw_support) { + len = le16_to_cpu(txdesc->data_len); + if (len < PRISM2_DATA_MAXLEN) { + *payload = (char *) kmalloc(len, GFP_ATOMIC); + if (*payload == NULL || + hfa384x_from_bap(dev, BAP0, *payload, len)) { + PDEBUG(DEBUG_EXTRA, "%s: could not read TX " + "frame payload\n", dev->name); + kfree(*payload); + *payload = NULL; + ret = -1; + goto fail; + } + } + } + + fail: + spin_unlock(&local->baplock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_tx_ev(local_info_t *local) +{ + struct net_device *dev = local->dev; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + if (hostap_tx_compl_read(local, 0, &txdesc, &payload)) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) { + PDEBUG(DEBUG_EXTRA, "%s: TX - status=0x%04x " + "retry_count=%d tx_rate=%d seq_ctrl=%d " + "duration_id=%d\n", + dev->name, le16_to_cpu(txdesc.status), + txdesc.retry_count, txdesc.tx_rate, + le16_to_cpu(txdesc.seq_ctrl), + le16_to_cpu(txdesc.duration_id)); + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 1, payload); + kfree(payload); + + fail: + HFA384X_OUTW(HFA384X_EV_TX, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_sta_tx_exc_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->sta_tx_exc_list)) != NULL) { + struct hfa384x_tx_frame *txdesc = + (struct hfa384x_tx_frame *) skb->data; + + if (skb->len >= sizeof(*txdesc)) { + /* Convert Prism2 RX structure into IEEE 802.11 header + */ + u16 fc = le16_to_cpu(txdesc->frame_control); + int hdrlen = hostap_80211_get_hdrlen(fc); + memmove(skb_pull(skb, sizeof(*txdesc) - hdrlen), + &txdesc->frame_control, hdrlen); + + hostap_handle_sta_tx_exc(local, skb); + } + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_txexc(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 status, fc; + int show_dump, res; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + show_dump = local->frame_dump & PRISM2_DUMP_TXEXC_HDR; + local->stats.tx_errors++; + + res = hostap_tx_compl_read(local, 1, &txdesc, &payload); + HFA384X_OUTW(HFA384X_EV_TXEXC, HFA384X_EVACK_OFF); + if (res) + return; + + status = le16_to_cpu(txdesc.status); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + if (status & (HFA384X_TX_STATUS_RETRYERR | HFA384X_TX_STATUS_AGEDERR)) + { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. */ + memcpy(wrqu.addr.sa_data, txdesc.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } else + show_dump = 1; + + if (local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT || + local->wds_type & HOSTAP_WDS_AP_CLIENT) { + struct sk_buff *skb; + skb = dev_alloc_skb(sizeof(txdesc)); + if (skb) { + memcpy(skb_put(skb, sizeof(txdesc)), &txdesc, + sizeof(txdesc)); + skb_queue_tail(&local->sta_tx_exc_list, skb); + tasklet_schedule(&local->sta_tx_exc_tasklet); + } + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 0, payload); + kfree(payload); + + if (!show_dump) + return; + + PDEBUG(DEBUG_EXTRA, "%s: TXEXC - status=0x%04x (%s%s%s%s)" + " tx_control=%04x\n", + dev->name, status, + status & HFA384X_TX_STATUS_RETRYERR ? "[RetryErr]" : "", + status & HFA384X_TX_STATUS_AGEDERR ? "[AgedErr]" : "", + status & HFA384X_TX_STATUS_DISCON ? "[Discon]" : "", + status & HFA384X_TX_STATUS_FORMERR ? "[FormErr]" : "", + le16_to_cpu(txdesc.tx_control)); + + fc = le16_to_cpu(txdesc.frame_control); + PDEBUG(DEBUG_EXTRA, " retry_count=%d tx_rate=%d fc=0x%04x " + "(%s%s%s::%d%s%s)\n", + txdesc.retry_count, txdesc.tx_rate, fc, + WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_MGMT ? "Mgmt" : "", + WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_CTRL ? "Ctrl" : "", + WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_DATA ? "Data" : "", + WLAN_FC_GET_STYPE(fc), + fc & WLAN_FC_TODS ? " ToDS" : "", + fc & WLAN_FC_FROMDS ? " FromDS" : ""); + PDEBUG(DEBUG_EXTRA, " A1=" MACSTR " A2=" MACSTR " A3=" + MACSTR " A4=" MACSTR "\n", + MAC2STR(txdesc.addr1), MAC2STR(txdesc.addr2), + MAC2STR(txdesc.addr3), MAC2STR(txdesc.addr4)); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_info_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->info_list)) != NULL) { + hostap_info_process(local, skb); + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 fid; + int res, left; + struct hfa384x_info_frame info; + struct sk_buff *skb; + + fid = HFA384X_INW(HFA384X_INFOFID_OFF); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &info, sizeof(info)); + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", + fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto out; + } + + le16_to_cpus(&info.len); + le16_to_cpus(&info.type); + left = (info.len - 1) * 2; + + if (info.len & 0x8000 || info.len == 0 || left > 2060) { + /* data register seems to give 0x8000 in some error cases even + * though busy bit is not set in offset register; + * in addition, length must be at least 1 due to type field */ + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received info frame with invalid " + "length 0x%04x (type 0x%04x)\n", dev->name, info.len, + info.type); + goto out; + } + + skb = dev_alloc_skb(sizeof(info) + left); + if (skb == NULL) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Could not allocate skb for info " + "frame\n", dev->name); + goto out; + } + + memcpy(skb_put(skb, sizeof(info)), &info, sizeof(info)); + if (left > 0 && hfa384x_from_bap(dev, BAP0, skb_put(skb, left), left)) + { + spin_unlock(&local->baplock); + printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, " + "len=0x%04x, type=0x%04x\n", + dev->name, fid, info.len, info.type); + dev_kfree_skb(skb); + goto out; + } + spin_unlock(&local->baplock); + + skb_queue_tail(&local->info_list, skb); + tasklet_schedule(&local->info_tasklet); + + out: + HFA384X_OUTW(HFA384X_EV_INFO, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_bap_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 ev; + int frames = 30; + + if (local->func->card_present && !local->func->card_present(local)) + return; + + set_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Process all pending BAP events without generating new interrupts + * for them */ + while (frames-- > 0) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff || !(ev & HFA384X_BAP0_EVENTS)) + break; + if (ev & HFA384X_EV_RX) + prism2_rx(local); + if (ev & HFA384X_EV_INFO) + prism2_info(local); + if (ev & HFA384X_EV_TX) + prism2_tx_ev(local); + if (ev & HFA384X_EV_TXEXC) + prism2_txexc(local); + } + + set_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); + clear_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Enable interrupts for new BAP events */ + hfa384x_events_all(dev); + clear_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); +} + + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) +/* Called only from hardware IRQ */ +static void prism2_bus_master_ev(struct net_device *dev, int bap) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (bap == BAP1) { + /* FIX: frame payload was DMA'd to skb->data; might need to + * invalidate data cache for that memory area */ + skb_queue_tail(&local->rx_list, local->rx_skb); + tasklet_schedule(&local->rx_tasklet); + HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); + } else { + if (prism2_transmit(dev, local->bus_m0_tx_idx)) { + printk(KERN_DEBUG "%s: prism2_transmit() failed " + "when called from bus master event\n", + dev->name); + local->intransmitfid[local->bus_m0_tx_idx] = + PRISM2_TXFID_EMPTY; + schedule_work(&local->reset_queue); + } + } +} +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + +/* Called only from hardware IRQ */ +static void prism2_infdrop(struct net_device *dev) +{ + static unsigned long last_inquire = 0; + + PDEBUG(DEBUG_EXTRA, "%s: INFDROP event\n", dev->name); + + /* some firmware versions seem to get stuck with + * full CommTallies in high traffic load cases; every + * packet will then cause INFDROP event and CommTallies + * info frame will not be sent automatically. Try to + * get out of this state by inquiring CommTallies. */ + if (!last_inquire || time_after(jiffies, last_inquire + HZ)) { + hfa384x_cmd_callback(dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, NULL); + last_inquire = jiffies; + } +} + + +/* Called only from hardware IRQ */ +static void prism2_ev_tick(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 evstat, inten; + static int prev_stuck = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (time_after(jiffies, local->last_tick_timer + 5 * HZ) && + local->last_tick_timer) { + evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + inten = HFA384X_INW(HFA384X_INTEN_OFF); + if (!prev_stuck) { + printk(KERN_INFO "%s: SW TICK stuck? " + "bits=0x%lx EvStat=%04x IntEn=%04x\n", + dev->name, local->bits, evstat, inten); + } + local->sw_tick_stuck++; + if ((evstat & HFA384X_BAP0_EVENTS) && + (inten & HFA384X_BAP0_EVENTS)) { + printk(KERN_INFO "%s: trying to recover from IRQ " + "hang\n", dev->name); + hfa384x_events_no_bap0(dev); + } + prev_stuck = 1; + } else + prev_stuck = 0; +} + + +/* Called only from hardware IRQ */ +static inline void prism2_check_magic(local_info_t *local) +{ + /* at least PCI Prism2.5 with bus mastering seems to sometimes + * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the + * register once or twice seems to get the correct value.. PCI cards + * cannot anyway be removed during normal operation, so there is not + * really any need for this verification with them. */ + +#ifndef PRISM2_PCI +#ifndef final_version + static unsigned long last_magic_err = 0; + struct net_device *dev = local->dev; + + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + if (!local->hw_ready) + return; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + if (time_after(jiffies, last_magic_err + 10 * HZ)) { + printk("%s: Interrupt, but SWSUPPORT0 does not match: " + "%04X != %04X - card removed?\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + last_magic_err = jiffies; + } else if (net_ratelimit()) { + printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " + "MAGIC=%04x\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + } + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != 0xffff) + schedule_work(&local->reset_queue); + return; + } +#endif /* final_version */ +#endif /* !PRISM2_PCI */ +} + + +/* Called only from hardware IRQ */ +static irqreturn_t prism2_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct hostap_interface *iface; + local_info_t *local; + int events = 0; + u16 ev; + + iface = netdev_priv(dev); + local = iface->local; + + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + + if (local->func->card_present && !local->func->card_present(local)) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", + dev->name); + } + return IRQ_HANDLED; + } + + prism2_check_magic(local); + + for (;;) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff) { + if (local->shutdown) + return IRQ_HANDLED; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", + dev->name); + return IRQ_HANDLED; + } + + ev &= HFA384X_INW(HFA384X_INTEN_OFF); + if (ev == 0) + break; + + if (ev & HFA384X_EV_CMD) { + prism2_cmd_ev(dev); + } + + /* Above events are needed even before hw is ready, but other + * events should be skipped during initialization. This may + * change for AllocEv if allocate_fid is implemented without + * busy waiting. */ + if (!local->hw_ready || local->hw_resetting || + !local->dev_enabled) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev & HFA384X_EV_CMD) + goto next_event; + if ((ev & HFA384X_EVENT_MASK) == 0) + return IRQ_HANDLED; + if (local->dev_enabled && (ev & ~HFA384X_EV_TICK) && + net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_interrupt: hw " + "not ready; skipping events 0x%04x " + "(IntEn=0x%04x)%s%s%s\n", + dev->name, ev, + HFA384X_INW(HFA384X_INTEN_OFF), + !local->hw_ready ? " (!hw_ready)" : "", + local->hw_resetting ? + " (hw_resetting)" : "", + !local->dev_enabled ? + " (!dev_enabled)" : ""); + } + HFA384X_OUTW(ev, HFA384X_EVACK_OFF); + return IRQ_HANDLED; + } + + if (ev & HFA384X_EV_TICK) { + prism2_ev_tick(dev); + HFA384X_OUTW(HFA384X_EV_TICK, HFA384X_EVACK_OFF); + } + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + if (ev & HFA384X_EV_PCI_M0) { + prism2_bus_master_ev(dev, BAP0); + HFA384X_OUTW(HFA384X_EV_PCI_M0, HFA384X_EVACK_OFF); + } + + if (ev & HFA384X_EV_PCI_M1) { + /* previous RX has been copied can be ACKed now */ + HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); + + prism2_bus_master_ev(dev, BAP1); + HFA384X_OUTW(HFA384X_EV_PCI_M1, HFA384X_EVACK_OFF); + } +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + if (ev & HFA384X_EV_ALLOC) { + prism2_alloc_ev(dev); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + } + + /* Reading data from the card is quite time consuming, so do it + * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed + * and unmasked after needed data has been read completely. */ + if (ev & HFA384X_BAP0_EVENTS) { + hfa384x_events_no_bap0(dev); + tasklet_schedule(&local->bap_tasklet); + } + +#ifndef final_version + if (ev & HFA384X_EV_WTERR) { + PDEBUG(DEBUG_EXTRA, "%s: WTERR event\n", dev->name); + HFA384X_OUTW(HFA384X_EV_WTERR, HFA384X_EVACK_OFF); + } +#endif /* final_version */ + + if (ev & HFA384X_EV_INFDROP) { + prism2_infdrop(dev); + HFA384X_OUTW(HFA384X_EV_INFDROP, HFA384X_EVACK_OFF); + } + + next_event: + events++; + if (events >= PRISM2_MAX_INTERRUPT_EVENTS) { + PDEBUG(DEBUG_EXTRA, "prism2_interrupt: >%d events " + "(EvStat=0x%04x)\n", + PRISM2_MAX_INTERRUPT_EVENTS, + HFA384X_INW(HFA384X_EVSTAT_OFF)); + break; + } + } + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 1); + return IRQ_RETVAL(events); +} + + +static void prism2_check_sta_fw_version(local_info_t *local) +{ + struct hfa384x_comp_ident comp; + int id, variant, major, minor; + + if (hfa384x_get_rid(local->dev, HFA384X_RID_STAID, + &comp, sizeof(comp), 1) < 0) + return; + + local->fw_ap = 0; + id = le16_to_cpu(comp.id); + if (id != HFA384X_COMP_ID_STA) { + if (id == HFA384X_COMP_ID_FW_AP) + local->fw_ap = 1; + return; + } + + major = __le16_to_cpu(comp.major); + minor = __le16_to_cpu(comp.minor); + variant = __le16_to_cpu(comp.variant); + local->sta_fw_ver = PRISM2_FW_VER(major, minor, variant); + + /* Station firmware versions before 1.4.x seem to have a bug in + * firmware-based WEP encryption when using Host AP mode, so use + * host_encrypt as a default for them. Firmware version 1.4.9 is the + * first one that has been seen to produce correct encryption, but the + * bug might be fixed before that (although, at least 1.4.2 is broken). + */ + local->fw_encrypt_ok = local->sta_fw_ver >= PRISM2_FW_VER(1,4,9); + + if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " + "a workaround for firmware bug in Host AP mode WEP\n", + local->dev->name); + local->host_encrypt = 1; + } + + /* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken + * in station firmware versions before 1.5.x. With these versions, the + * driver uses a workaround with bogus frame format (4th address after + * the payload). This is not compatible with other AP devices. Since + * the firmware bug is fixed in the latest station firmware versions, + * automatically enable standard compliant mode for cards using station + * firmware version 1.5.0 or newer. */ + if (local->sta_fw_ver >= PRISM2_FW_VER(1,5,0)) + local->wds_type |= HOSTAP_WDS_STANDARD_FRAME; + else { + printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " + "workaround for firmware bug in Host AP mode WDS\n", + local->dev->name); + } + + hostap_check_sta_fw_version(local->ap, local->sta_fw_ver); +} + + +static void prism2_crypt_deinit_entries(local_info_t *local, int force) +{ + struct list_head *ptr, *n; + struct prism2_crypt_data *entry; + + for (ptr = local->crypt_deinit_list.next, n = ptr->next; + ptr != &local->crypt_deinit_list; ptr = n, n = ptr->next) { + entry = list_entry(ptr, struct prism2_crypt_data, list); + + if (atomic_read(&entry->refcnt) != 0 && !force) + continue; + + list_del(ptr); + + if (entry->ops) + entry->ops->deinit(entry->priv); + kfree(entry); + } +} + + +static void prism2_crypt_deinit_handler(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + unsigned long flags; + + spin_lock_irqsave(&local->lock, flags); + prism2_crypt_deinit_entries(local, 0); + if (!list_empty(&local->crypt_deinit_list)) { + printk(KERN_DEBUG "%s: entries remaining in delayed crypt " + "deletion list\n", local->dev->name); + local->crypt_deinit_timer.expires = jiffies + HZ; + add_timer(&local->crypt_deinit_timer); + } + spin_unlock_irqrestore(&local->lock, flags); + +} + + +static void hostap_passive_scan(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 channel; + + if (local->passive_scan_interval <= 0) + return; + + if (local->passive_scan_state == PASSIVE_SCAN_LISTEN) { + int max_tries = 16; + + /* Even though host system does not really know when the WLAN + * MAC is sending frames, try to avoid changing channels for + * passive scanning when a host-generated frame is being + * transmitted */ + if (test_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: passive scan detected pending " + "TX - delaying\n", dev->name); + local->passive_scan_timer.expires = jiffies + HZ / 10; + add_timer(&local->passive_scan_timer); + return; + } + + do { + local->passive_scan_channel++; + if (local->passive_scan_channel > 14) + local->passive_scan_channel = 1; + max_tries--; + } while (!(local->channel_mask & + (1 << (local->passive_scan_channel - 1))) && + max_tries > 0); + + if (max_tries == 0) { + printk(KERN_INFO "%s: no allowed passive scan channels" + " found\n", dev->name); + return; + } + + printk(KERN_DEBUG "%s: passive scan channel %d\n", + dev->name, local->passive_scan_channel); + channel = local->passive_scan_channel; + local->passive_scan_state = PASSIVE_SCAN_WAIT; + local->passive_scan_timer.expires = jiffies + HZ / 10; + } else { + channel = local->channel; + local->passive_scan_state = PASSIVE_SCAN_LISTEN; + local->passive_scan_timer.expires = jiffies + + local->passive_scan_interval * HZ; + } + + if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CHANGE_CHANNEL << 8), + channel, NULL, NULL)) + printk(KERN_ERR "%s: passive scan channel set %d " + "failed\n", dev->name, channel); + + add_timer(&local->passive_scan_timer); +} + + +/* Called only as a scheduled task when communications quality values should + * be updated. */ +static void handle_comms_qual_update(void *data) +{ + local_info_t *local = data; + prism2_update_comms_qual(local->dev); +} + + +/* Software watchdog - called as a timer. Hardware interrupt (Tick event) is + * used to monitor that local->last_tick_timer is being updated. If not, + * interrupt busy-loop is assumed and driver tries to recover by masking out + * some events. */ +static void hostap_tick_timer(unsigned long data) +{ + static unsigned long last_inquire = 0; + local_info_t *local = (local_info_t *) data; + local->last_tick_timer = jiffies; + + /* Inquire CommTallies every 10 seconds to keep the statistics updated + * more often during low load and when using 32-bit tallies. */ + if ((!last_inquire || time_after(jiffies, last_inquire + 10 * HZ)) && + !local->hw_downloading && local->hw_ready && + !local->hw_resetting && local->dev_enabled) { + hfa384x_cmd_callback(local->dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, NULL); + last_inquire = jiffies; + } + + if ((local->last_comms_qual_update == 0 || + time_after(jiffies, local->last_comms_qual_update + 10 * HZ)) && + (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC)) { + schedule_work(&local->comms_qual_update); + } + + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); +} + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int prism2_registers_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *p = page; + local_info_t *local = (local_info_t *) data; + + if (off != 0) { + *eof = 1; + return 0; + } + +#define SHOW_REG(n) \ +p += sprintf(p, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF)) + + SHOW_REG(CMD); + SHOW_REG(PARAM0); + SHOW_REG(PARAM1); + SHOW_REG(PARAM2); + SHOW_REG(STATUS); + SHOW_REG(RESP0); + SHOW_REG(RESP1); + SHOW_REG(RESP2); + SHOW_REG(INFOFID); + SHOW_REG(CONTROL); + SHOW_REG(SELECT0); + SHOW_REG(SELECT1); + SHOW_REG(OFFSET0); + SHOW_REG(OFFSET1); + SHOW_REG(RXFID); + SHOW_REG(ALLOCFID); + SHOW_REG(TXCOMPLFID); + SHOW_REG(SWSUPPORT0); + SHOW_REG(SWSUPPORT1); + SHOW_REG(SWSUPPORT2); + SHOW_REG(EVSTAT); + SHOW_REG(INTEN); + SHOW_REG(EVACK); + /* Do not read data registers, because they change the state of the + * MAC (offset += 2) */ + /* SHOW_REG(DATA0); */ + /* SHOW_REG(DATA1); */ + SHOW_REG(AUXPAGE); + SHOW_REG(AUXOFFSET); + /* SHOW_REG(AUXDATA); */ +#ifdef PRISM2_PCI + SHOW_REG(PCICOR); + SHOW_REG(PCIHCR); + SHOW_REG(PCI_M0_ADDRH); + SHOW_REG(PCI_M0_ADDRL); + SHOW_REG(PCI_M0_LEN); + SHOW_REG(PCI_M0_CTL); + SHOW_REG(PCI_STATUS); + SHOW_REG(PCI_M1_ADDRH); + SHOW_REG(PCI_M1_ADDRL); + SHOW_REG(PCI_M1_LEN); + SHOW_REG(PCI_M1_CTL); +#endif /* PRISM2_PCI */ + + return (p - page); +} +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +struct set_tim_data { + struct list_head list; + int aid; + int set; +}; + +static int prism2_set_tim(struct net_device *dev, int aid, int set) +{ + struct list_head *ptr; + struct set_tim_data *new_entry; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + new_entry = (struct set_tim_data *) + kmalloc(sizeof(*new_entry), GFP_ATOMIC); + if (new_entry == NULL) { + printk(KERN_DEBUG "%s: prism2_set_tim: kmalloc failed\n", + local->dev->name); + return -ENOMEM; + } + memset(new_entry, 0, sizeof(*new_entry)); + new_entry->aid = aid; + new_entry->set = set; + + spin_lock_bh(&local->set_tim_lock); + list_for_each(ptr, &local->set_tim_list) { + struct set_tim_data *entry = + list_entry(ptr, struct set_tim_data, list); + if (entry->aid == aid) { + PDEBUG(DEBUG_PS2, "%s: prism2_set_tim: aid=%d " + "set=%d ==> %d\n", + local->dev->name, aid, entry->set, set); + entry->set = set; + kfree(new_entry); + new_entry = NULL; + break; + } + } + if (new_entry) + list_add_tail(&new_entry->list, &local->set_tim_list); + spin_unlock_bh(&local->set_tim_lock); + + schedule_work(&local->set_tim_queue); + + return 0; +} + + +static void handle_set_tim_queue(void *data) +{ + local_info_t *local = (local_info_t *) data; + struct set_tim_data *entry; + u16 val; + + for (;;) { + entry = NULL; + spin_lock_bh(&local->set_tim_lock); + if (!list_empty(&local->set_tim_list)) { + entry = list_entry(local->set_tim_list.next, + struct set_tim_data, list); + list_del(&entry->list); + } + spin_unlock_bh(&local->set_tim_lock); + if (!entry) + break; + + PDEBUG(DEBUG_PS2, "%s: handle_set_tim_queue: aid=%d set=%d\n", + local->dev->name, entry->aid, entry->set); + + val = entry->aid; + if (entry->set) + val |= 0x8000; + if (hostap_set_word(local->dev, HFA384X_RID_CNFTIMCTRL, val)) { + printk(KERN_DEBUG "%s: set_tim failed (aid=%d " + "set=%d)\n", + local->dev->name, entry->aid, entry->set); + } + + kfree(entry); + } +} + + +static void prism2_clear_set_tim_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + + list_for_each_safe(ptr, n, &local->set_tim_list) { + struct set_tim_data *entry; + entry = list_entry(ptr, struct set_tim_data, list); + list_del(&entry->list); + kfree(entry); + } +} + + +static struct net_device * +prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct local_info *local; + int len, i, ret; + + if (funcs == NULL) + return NULL; + + len = strlen(dev_template); + if (len >= IFNAMSIZ || strstr(dev_template, "%d") == NULL) { + printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n", + dev_template); + return NULL; + } + + len = sizeof(struct hostap_interface) + + 3 + sizeof(struct local_info) + + 3 + sizeof(struct ap_data); + + dev = alloc_etherdev(len); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + local = (struct local_info *) ((((long) (iface + 1)) + 3) & ~3); + local->ap = (struct ap_data *) ((((long) (local + 1)) + 3) & ~3); + local->dev = iface->dev = dev; + iface->local = local; + iface->type = HOSTAP_INTERFACE_MASTER; + INIT_LIST_HEAD(&local->hostap_interfaces); + + local->hw_module = THIS_MODULE; + +#ifdef PRISM2_IO_DEBUG + local->io_debug_enabled = 1; +#endif /* PRISM2_IO_DEBUG */ + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + local->bus_m0_buf = (u8 *) kmalloc(sizeof(struct hfa384x_tx_frame) + + PRISM2_DATA_MAXLEN, GFP_DMA); + if (local->bus_m0_buf == NULL) + goto fail; +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + local->func = funcs; + local->func->cmd = hfa384x_cmd; + local->func->read_regs = hfa384x_read_regs; + local->func->get_rid = hfa384x_get_rid; + local->func->set_rid = hfa384x_set_rid; + local->func->hw_enable = prism2_hw_enable; + local->func->hw_config = prism2_hw_config; + local->func->hw_reset = prism2_hw_reset; + local->func->hw_shutdown = prism2_hw_shutdown; + local->func->reset_port = prism2_reset_port; + local->func->schedule_reset = prism2_schedule_reset; +#ifdef PRISM2_DOWNLOAD_SUPPORT + local->func->read_aux = prism2_download_aux_dump; + local->func->download = prism2_download; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + local->func->tx = prism2_tx_80211; + local->func->set_tim = prism2_set_tim; + local->func->need_tx_headroom = 0; /* no need to add txdesc in + * skb->data (FIX: maybe for DMA bus + * mastering? */ + + local->mtu = mtu; + + rwlock_init(&local->iface_lock); + spin_lock_init(&local->txfidlock); + spin_lock_init(&local->cmdlock); + spin_lock_init(&local->baplock); + spin_lock_init(&local->lock); + init_MUTEX(&local->rid_bap_sem); + + if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) + card_idx = 0; + local->card_idx = card_idx; + + len = strlen(essid); + memcpy(local->essid, essid, + len > MAX_SSID_LEN ? MAX_SSID_LEN : len); + local->essid[MAX_SSID_LEN] = '\0'; + i = GET_INT_PARM(iw_mode, card_idx); + if ((i >= IW_MODE_ADHOC && i <= IW_MODE_REPEAT) || + i == IW_MODE_MONITOR) { + local->iw_mode = i; + } else { + printk(KERN_WARNING "prism2: Unknown iw_mode %d; using " + "IW_MODE_MASTER\n", i); + local->iw_mode = IW_MODE_MASTER; + } + local->channel = GET_INT_PARM(channel, card_idx); + local->beacon_int = GET_INT_PARM(beacon_int, card_idx); + local->dtim_period = GET_INT_PARM(dtim_period, card_idx); + local->wds_max_connections = 16; + local->tx_control = HFA384X_TX_CTRL_FLAGS; + local->manual_retry_count = -1; + local->rts_threshold = 2347; + local->fragm_threshold = 2346; + local->rssi_to_dBm = 100; /* default; to be overriden by + * cnfDbmAdjust, if available */ + local->auth_algs = PRISM2_AUTH_OPEN | PRISM2_AUTH_SHARED_KEY; + local->sram_type = -1; +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + local->bus_master_threshold_rx = GET_INT_PARM(bus_master_threshold_rx, + card_idx); + local->bus_master_threshold_tx = GET_INT_PARM(bus_master_threshold_tx, + card_idx); +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + + /* Initialize task queue structures */ + INIT_WORK(&local->reset_queue, handle_reset_queue, local); + INIT_WORK(&local->set_multicast_list_queue, + hostap_set_multicast_list_queue, local->dev); + + INIT_WORK(&local->set_tim_queue, handle_set_tim_queue, local); + INIT_LIST_HEAD(&local->set_tim_list); + spin_lock_init(&local->set_tim_lock); + + INIT_WORK(&local->comms_qual_update, handle_comms_qual_update, local); + + /* Initialize tasklets for handling hardware IRQ related operations + * outside hw IRQ handler */ +#define HOSTAP_TASKLET_INIT(q, f, d) \ +do { memset((q), 0, sizeof(*(q))); (q)->func = (f); (q)->data = (d); } \ +while (0) + HOSTAP_TASKLET_INIT(&local->bap_tasklet, hostap_bap_tasklet, + (unsigned long) local); + + HOSTAP_TASKLET_INIT(&local->info_tasklet, hostap_info_tasklet, + (unsigned long) local); + hostap_info_init(local); + + HOSTAP_TASKLET_INIT(&local->rx_tasklet, + hostap_rx_tasklet, (unsigned long) local); + skb_queue_head_init(&local->rx_list); + + HOSTAP_TASKLET_INIT(&local->sta_tx_exc_tasklet, + hostap_sta_tx_exc_tasklet, (unsigned long) local); + skb_queue_head_init(&local->sta_tx_exc_list); + + INIT_LIST_HEAD(&local->cmd_queue); + init_waitqueue_head(&local->hostscan_wq); + INIT_LIST_HEAD(&local->crypt_deinit_list); + init_timer(&local->crypt_deinit_timer); + local->crypt_deinit_timer.data = (unsigned long) local; + local->crypt_deinit_timer.function = prism2_crypt_deinit_handler; + + init_timer(&local->passive_scan_timer); + local->passive_scan_timer.data = (unsigned long) local; + local->passive_scan_timer.function = hostap_passive_scan; + + init_timer(&local->tick_timer); + local->tick_timer.data = (unsigned long) local; + local->tick_timer.function = hostap_tick_timer; + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); + + INIT_LIST_HEAD(&local->bss_list); + + hostap_setup_dev(dev, local, 1); + local->saved_eth_header_parse = dev->hard_header_parse; + + dev->hard_start_xmit = hostap_master_start_xmit; + dev->type = ARPHRD_IEEE80211; + dev->hard_header_parse = hostap_80211_header_parse; + + rtnl_lock(); + ret = dev_alloc_name(dev, "wifi%d"); + if (ret >= 0) + ret = register_netdevice(dev); + rtnl_unlock(); + if (ret < 0) { + printk(KERN_WARNING "%s: register netdevice failed!\n", + dev_info); + goto fail; + } + printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name); + +#ifndef PRISM2_NO_PROCFS_DEBUG + create_proc_read_entry("registers", 0, local->proc, + prism2_registers_proc_read, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + hostap_init_data(local); + return dev; + + fail: +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + kfree(local->bus_m0_buf); +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + free_netdev(dev); + return NULL; +} + + +static int hostap_hw_ready(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + + iface = netdev_priv(dev); + local = iface->local; + local->ddev = hostap_add_interface(local, HOSTAP_INTERFACE_MAIN, 0, + "", dev_template); + + if (local->ddev) { + if (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC) { + netif_carrier_off(local->dev); + netif_carrier_off(local->ddev); + } + hostap_init_proc(local); + hostap_init_ap_proc(local); + return 0; + } + + return -1; +} + + +static void prism2_free_local_data(struct net_device *dev) +{ + struct hostap_tx_callback_info *tx_cb, *tx_cb_prev; + int i; + struct hostap_interface *iface; + struct local_info *local; + struct list_head *ptr, *n; + + if (dev == NULL) + return; + + iface = netdev_priv(dev); + local = iface->local; + + flush_scheduled_work(); + + if (timer_pending(&local->crypt_deinit_timer)) + del_timer(&local->crypt_deinit_timer); + prism2_crypt_deinit_entries(local, 1); + + if (timer_pending(&local->passive_scan_timer)) + del_timer(&local->passive_scan_timer); + + if (timer_pending(&local->tick_timer)) + del_timer(&local->tick_timer); + + prism2_clear_cmd_queue(local); + + skb_queue_purge(&local->info_list); + skb_queue_purge(&local->rx_list); + skb_queue_purge(&local->sta_tx_exc_list); + + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + + for (i = 0; i < WEP_KEYS; i++) { + struct prism2_crypt_data *crypt = local->crypt[i]; + if (crypt) { + if (crypt->ops) + crypt->ops->deinit(crypt->priv); + kfree(crypt); + local->crypt[i] = NULL; + } + } + + if (local->ap != NULL) + hostap_free_data(local->ap); + +#ifndef PRISM2_NO_PROCFS_DEBUG + if (local->proc != NULL) + remove_proc_entry("registers", local->proc); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + hostap_remove_proc(local); + + tx_cb = local->tx_callback; + while (tx_cb != NULL) { + tx_cb_prev = tx_cb; + tx_cb = tx_cb->next; + kfree(tx_cb_prev); + } + + hostap_set_hostapd(local, 0, 0); + hostap_set_hostapd_sta(local, 0, 0); + + for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { + if (local->frag_cache[i].skb != NULL) + dev_kfree_skb(local->frag_cache[i].skb); + } + +#ifdef PRISM2_DOWNLOAD_SUPPORT + prism2_download_free_data(local->dl_pri); + prism2_download_free_data(local->dl_sec); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + list_for_each_safe(ptr, n, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_MASTER) { + /* special handling for this interface below */ + continue; + } + hostap_remove_interface(iface->dev, 0, 1); + } + + prism2_clear_set_tim_queue(local); + + list_for_each_safe(ptr, n, &local->bss_list) { + struct hostap_bss_info *bss = + list_entry(ptr, struct hostap_bss_info, list); + kfree(bss); + } + +#if defined(PRISM2_PCI) && defined(PRISM2_BUS_MASTER) + kfree(local->bus_m0_buf); +#endif /* PRISM2_PCI and PRISM2_BUS_MASTER */ + kfree(local->pda); + kfree(local->last_scan_results); + kfree(local->generic_elem); + + unregister_netdev(local->dev); + free_netdev(local->dev); +} + + +#ifndef PRISM2_PLX +static void prism2_suspend(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + union iwreq_data wrqu; + + iface = dev->priv; + local = iface->local; + + /* Send disconnect event, e.g., to trigger reassociation after resume + * if wpa_supplicant is used. */ + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + + /* Disable hardware and firmware */ + prism2_hw_shutdown(dev, 0); +} +#endif /* PRISM2_PLX */ + + +/* These might at some point be compiled separately and used as separate + * kernel modules or linked into one */ +#ifdef PRISM2_DOWNLOAD_SUPPORT +#include "hostap_download.c" +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +#ifdef PRISM2_CALLBACK +/* External hostap_callback.c file can be used to, e.g., blink activity led. + * This can use platform specific code and must define prism2_callback() + * function (if PRISM2_CALLBACK is not defined, these function calls are not + * used. */ +#include "hostap_callback.c" +#endif /* PRISM2_CALLBACK */ |