diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-3945.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-3945.c | 2742 |
1 files changed, 2742 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c new file mode 100644 index 000000000000..d096dc28204d --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl-3945.c @@ -0,0 +1,2742 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> +#include <net/mac80211.h> + +#include "iwl-fh.h" +#include "iwl-3945-fh.h" +#include "iwl-commands.h" +#include "iwl-sta.h" +#include "iwl-3945.h" +#include "iwl-eeprom.h" +#include "iwl-core.h" +#include "iwl-helpers.h" +#include "iwl-led.h" +#include "iwl-3945-led.h" +#include "iwl-3945-debugfs.h" + +#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX, \ + IWL_RATE_##r##M_INDEX_TABLE, \ + IWL_RATE_##ip##M_INDEX_TABLE } + +/* + * Parameter order: + * rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = { + IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */ +}; + +static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index) +{ + u8 rate = iwl3945_rates[rate_index].prev_ieee; + + if (rate == IWL_RATE_INVALID) + rate = rate_index; + return rate; +} + +/* 1 = enable the iwl3945_disable_events() function */ +#define IWL_EVT_DISABLE (0) +#define IWL_EVT_DISABLE_SIZE (1532/32) + +/** + * iwl3945_disable_events - Disable selected events in uCode event log + * + * Disable an event by writing "1"s into "disable" + * bitmap in SRAM. Bit position corresponds to Event # (id/type). + * Default values of 0 enable uCode events to be logged. + * Use for only special debugging. This function is just a placeholder as-is, + * you'll need to provide the special bits! ... + * ... and set IWL_EVT_DISABLE to 1. */ +void iwl3945_disable_events(struct iwl_priv *priv) +{ + int i; + u32 base; /* SRAM address of event log header */ + u32 disable_ptr; /* SRAM address of event-disable bitmap array */ + u32 array_size; /* # of u32 entries in array */ + static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = { + 0x00000000, /* 31 - 0 Event id numbers */ + 0x00000000, /* 63 - 32 */ + 0x00000000, /* 95 - 64 */ + 0x00000000, /* 127 - 96 */ + 0x00000000, /* 159 - 128 */ + 0x00000000, /* 191 - 160 */ + 0x00000000, /* 223 - 192 */ + 0x00000000, /* 255 - 224 */ + 0x00000000, /* 287 - 256 */ + 0x00000000, /* 319 - 288 */ + 0x00000000, /* 351 - 320 */ + 0x00000000, /* 383 - 352 */ + 0x00000000, /* 415 - 384 */ + 0x00000000, /* 447 - 416 */ + 0x00000000, /* 479 - 448 */ + 0x00000000, /* 511 - 480 */ + 0x00000000, /* 543 - 512 */ + 0x00000000, /* 575 - 544 */ + 0x00000000, /* 607 - 576 */ + 0x00000000, /* 639 - 608 */ + 0x00000000, /* 671 - 640 */ + 0x00000000, /* 703 - 672 */ + 0x00000000, /* 735 - 704 */ + 0x00000000, /* 767 - 736 */ + 0x00000000, /* 799 - 768 */ + 0x00000000, /* 831 - 800 */ + 0x00000000, /* 863 - 832 */ + 0x00000000, /* 895 - 864 */ + 0x00000000, /* 927 - 896 */ + 0x00000000, /* 959 - 928 */ + 0x00000000, /* 991 - 960 */ + 0x00000000, /* 1023 - 992 */ + 0x00000000, /* 1055 - 1024 */ + 0x00000000, /* 1087 - 1056 */ + 0x00000000, /* 1119 - 1088 */ + 0x00000000, /* 1151 - 1120 */ + 0x00000000, /* 1183 - 1152 */ + 0x00000000, /* 1215 - 1184 */ + 0x00000000, /* 1247 - 1216 */ + 0x00000000, /* 1279 - 1248 */ + 0x00000000, /* 1311 - 1280 */ + 0x00000000, /* 1343 - 1312 */ + 0x00000000, /* 1375 - 1344 */ + 0x00000000, /* 1407 - 1376 */ + 0x00000000, /* 1439 - 1408 */ + 0x00000000, /* 1471 - 1440 */ + 0x00000000, /* 1503 - 1472 */ + }; + + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + if (!iwl3945_hw_valid_rtc_data_addr(base)) { + IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); + return; + } + + disable_ptr = iwl_legacy_read_targ_mem(priv, base + (4 * sizeof(u32))); + array_size = iwl_legacy_read_targ_mem(priv, base + (5 * sizeof(u32))); + + if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) { + IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n", + disable_ptr); + for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++) + iwl_legacy_write_targ_mem(priv, + disable_ptr + (i * sizeof(u32)), + evt_disable[i]); + + } else { + IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n"); + IWL_DEBUG_INFO(priv, " by writing \"1\"s into disable bitmap\n"); + IWL_DEBUG_INFO(priv, " in SRAM at 0x%x, size %d u32s\n", + disable_ptr, array_size); + } + +} + +static int iwl3945_hwrate_to_plcp_idx(u8 plcp) +{ + int idx; + + for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++) + if (iwl3945_rates[idx].plcp == plcp) + return idx; + return -1; +} + +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG +#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x + +static const char *iwl3945_get_tx_fail_reason(u32 status) +{ + switch (status & TX_STATUS_MSK) { + case TX_3945_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_ENTRY(SHORT_LIMIT); + TX_STATUS_ENTRY(LONG_LIMIT); + TX_STATUS_ENTRY(FIFO_UNDERRUN); + TX_STATUS_ENTRY(MGMNT_ABORT); + TX_STATUS_ENTRY(NEXT_FRAG); + TX_STATUS_ENTRY(LIFE_EXPIRE); + TX_STATUS_ENTRY(DEST_PS); + TX_STATUS_ENTRY(ABORTED); + TX_STATUS_ENTRY(BT_RETRY); + TX_STATUS_ENTRY(STA_INVALID); + TX_STATUS_ENTRY(FRAG_DROPPED); + TX_STATUS_ENTRY(TID_DISABLE); + TX_STATUS_ENTRY(FRAME_FLUSHED); + TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); + TX_STATUS_ENTRY(TX_LOCKED); + TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); + } + + return "UNKNOWN"; +} +#else +static inline const char *iwl3945_get_tx_fail_reason(u32 status) +{ + return ""; +} +#endif + +/* + * get ieee prev rate from rate scale table. + * for A and B mode we need to overright prev + * value + */ +int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate) +{ + int next_rate = iwl3945_get_prev_ieee_rate(rate); + + switch (priv->band) { + case IEEE80211_BAND_5GHZ: + if (rate == IWL_RATE_12M_INDEX) + next_rate = IWL_RATE_9M_INDEX; + else if (rate == IWL_RATE_6M_INDEX) + next_rate = IWL_RATE_6M_INDEX; + break; + case IEEE80211_BAND_2GHZ: + if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) && + iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) { + if (rate == IWL_RATE_11M_INDEX) + next_rate = IWL_RATE_5M_INDEX; + } + break; + + default: + break; + } + + return next_rate; +} + + +/** + * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd + * + * When FW advances 'R' index, all entries between old and new 'R' index + * need to be reclaimed. As result, some free space forms. If there is + * enough free space (> low mark), wake the stack that feeds us. + */ +static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv, + int txq_id, int index) +{ + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct iwl_queue *q = &txq->q; + struct iwl_tx_info *tx_info; + + BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM); + + for (index = iwl_legacy_queue_inc_wrap(index, q->n_bd); + q->read_ptr != index; + q->read_ptr = iwl_legacy_queue_inc_wrap(q->read_ptr, q->n_bd)) { + + tx_info = &txq->txb[txq->q.read_ptr]; + ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb); + tx_info->skb = NULL; + priv->cfg->ops->lib->txq_free_tfd(priv, txq); + } + + if (iwl_legacy_queue_space(q) > q->low_mark && (txq_id >= 0) && + (txq_id != IWL39_CMD_QUEUE_NUM) && + priv->mac80211_registered) + iwl_legacy_wake_queue(priv, txq); +} + +/** + * iwl3945_rx_reply_tx - Handle Tx response + */ +static void iwl3945_rx_reply_tx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int index = SEQ_TO_INDEX(sequence); + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct ieee80211_tx_info *info; + struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le32_to_cpu(tx_resp->status); + int rate_idx; + int fail; + + if ((index >= txq->q.n_bd) || (iwl_legacy_queue_used(&txq->q, index) == 0)) { + IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " + "is out of range [0-%d] %d %d\n", txq_id, + index, txq->q.n_bd, txq->q.write_ptr, + txq->q.read_ptr); + return; + } + + txq->time_stamp = jiffies; + info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); + ieee80211_tx_info_clear_status(info); + + /* Fill the MRR chain with some info about on-chip retransmissions */ + rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + + fail = tx_resp->failure_frame; + + info->status.rates[0].idx = rate_idx; + info->status.rates[0].count = fail + 1; /* add final attempt */ + + /* tx_status->rts_retry_count = tx_resp->failure_rts; */ + info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? + IEEE80211_TX_STAT_ACK : 0; + + IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", + txq_id, iwl3945_get_tx_fail_reason(status), status, + tx_resp->rate, tx_resp->failure_frame); + + IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index); + iwl3945_tx_queue_reclaim(priv, txq_id, index); + + if (status & TX_ABORT_REQUIRED_MSK) + IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n"); +} + + + +/***************************************************************************** + * + * Intel PRO/Wireless 3945ABG/BG Network Connection + * + * RX handler implementations + * + *****************************************************************************/ +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS +static void iwl3945_accumulative_statistics(struct iwl_priv *priv, + __le32 *stats) +{ + int i; + __le32 *prev_stats; + u32 *accum_stats; + u32 *delta, *max_delta; + + prev_stats = (__le32 *)&priv->_3945.statistics; + accum_stats = (u32 *)&priv->_3945.accum_statistics; + delta = (u32 *)&priv->_3945.delta_statistics; + max_delta = (u32 *)&priv->_3945.max_delta; + + for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics); + i += sizeof(__le32), stats++, prev_stats++, delta++, + max_delta++, accum_stats++) { + if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { + *delta = (le32_to_cpu(*stats) - + le32_to_cpu(*prev_stats)); + *accum_stats += *delta; + if (*delta > *max_delta) + *max_delta = *delta; + } + } + + /* reset accumulative statistics for "no-counter" type statistics */ + priv->_3945.accum_statistics.general.temperature = + priv->_3945.statistics.general.temperature; + priv->_3945.accum_statistics.general.ttl_timestamp = + priv->_3945.statistics.general.ttl_timestamp; +} +#endif + +void iwl3945_hw_rx_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + + IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n", + (int)sizeof(struct iwl3945_notif_statistics), + le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK); +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS + iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw); +#endif + iwl_legacy_recover_from_statistics(priv, pkt); + + memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics)); +} + +void iwl3945_reply_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + __le32 *flag = (__le32 *)&pkt->u.raw; + + if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) { +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS + memset(&priv->_3945.accum_statistics, 0, + sizeof(struct iwl3945_notif_statistics)); + memset(&priv->_3945.delta_statistics, 0, + sizeof(struct iwl3945_notif_statistics)); + memset(&priv->_3945.max_delta, 0, + sizeof(struct iwl3945_notif_statistics)); +#endif + IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); + } + iwl3945_hw_rx_statistics(priv, rxb); +} + + +/****************************************************************************** + * + * Misc. internal state and helper functions + * + ******************************************************************************/ + +/* This is necessary only for a number of statistics, see the caller. */ +static int iwl3945_is_network_packet(struct iwl_priv *priv, + struct ieee80211_hdr *header) +{ + /* Filter incoming packets to determine if they are targeted toward + * this network, discarding packets coming from ourselves */ + switch (priv->iw_mode) { + case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr3, priv->bssid); + case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr2, priv->bssid); + default: + return 1; + } +} + +static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb, + struct ieee80211_rx_status *stats) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); + struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); + struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); + u16 len = le16_to_cpu(rx_hdr->len); + struct sk_buff *skb; + __le16 fc = hdr->frame_control; + + /* We received data from the HW, so stop the watchdog */ + if (unlikely(len + IWL39_RX_FRAME_SIZE > + PAGE_SIZE << priv->hw_params.rx_page_order)) { + IWL_DEBUG_DROP(priv, "Corruption detected!\n"); + return; + } + + /* We only process data packets if the interface is open */ + if (unlikely(!priv->is_open)) { + IWL_DEBUG_DROP_LIMIT(priv, + "Dropping packet while interface is not open.\n"); + return; + } + + skb = dev_alloc_skb(128); + if (!skb) { + IWL_ERR(priv, "dev_alloc_skb failed\n"); + return; + } + + if (!iwl3945_mod_params.sw_crypto) + iwl_legacy_set_decrypted_flag(priv, + (struct ieee80211_hdr *)rxb_addr(rxb), + le32_to_cpu(rx_end->status), stats); + + skb_add_rx_frag(skb, 0, rxb->page, + (void *)rx_hdr->payload - (void *)pkt, len); + + iwl_legacy_update_stats(priv, false, fc, len); + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(priv->hw, skb); + priv->alloc_rxb_page--; + rxb->page = NULL; +} + +#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) + +static void iwl3945_rx_reply_rx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); + struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); + struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); + u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); + u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff); + u8 network_packet; + + rx_status.flag = 0; + rx_status.mactime = le64_to_cpu(rx_end->timestamp); + rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), + rx_status.band); + + rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate); + if (rx_status.band == IEEE80211_BAND_5GHZ) + rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; + + rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + + if ((unlikely(rx_stats->phy_count > 20))) { + IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", + rx_stats->phy_count); + return; + } + + if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) + || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status); + return; + } + + + + /* Convert 3945's rssi indicator to dBm */ + rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET; + + IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n", + rx_status.signal, rx_stats_sig_avg, + rx_stats_noise_diff); + + header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); + + network_packet = iwl3945_is_network_packet(priv, header); + + IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n", + network_packet ? '*' : ' ', + le16_to_cpu(rx_hdr->channel), + rx_status.signal, rx_status.signal, + rx_status.rate_idx); + + iwl_legacy_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), + header); + + if (network_packet) { + priv->_3945.last_beacon_time = + le32_to_cpu(rx_end->beacon_timestamp); + priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); + priv->_3945.last_rx_rssi = rx_status.signal; + } + + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); +} + +int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + dma_addr_t addr, u16 len, u8 reset, u8 pad) +{ + int count; + struct iwl_queue *q; + struct iwl3945_tfd *tfd, *tfd_tmp; + + q = &txq->q; + tfd_tmp = (struct iwl3945_tfd *)txq->tfds; + tfd = &tfd_tmp[q->write_ptr]; + + if (reset) + memset(tfd, 0, sizeof(*tfd)); + + count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); + + if ((count >= NUM_TFD_CHUNKS) || (count < 0)) { + IWL_ERR(priv, "Error can not send more than %d chunks\n", + NUM_TFD_CHUNKS); + return -EINVAL; + } + + tfd->tbs[count].addr = cpu_to_le32(addr); + tfd->tbs[count].len = cpu_to_le32(len); + + count++; + + tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) | + TFD_CTL_PAD_SET(pad)); + + return 0; +} + +/** + * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr] + * + * Does NOT advance any indexes + */ +void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) +{ + struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds; + int index = txq->q.read_ptr; + struct iwl3945_tfd *tfd = &tfd_tmp[index]; + struct pci_dev *dev = priv->pci_dev; + int i; + int counter; + + /* sanity check */ + counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); + if (counter > NUM_TFD_CHUNKS) { + IWL_ERR(priv, "Too many chunks: %i\n", counter); + /* @todo issue fatal error, it is quite serious situation */ + return; + } + + /* Unmap tx_cmd */ + if (counter) + pci_unmap_single(dev, + dma_unmap_addr(&txq->meta[index], mapping), + dma_unmap_len(&txq->meta[index], len), + PCI_DMA_TODEVICE); + + /* unmap chunks if any */ + + for (i = 1; i < counter; i++) + pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr), + le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE); + + /* free SKB */ + if (txq->txb) { + struct sk_buff *skb; + + skb = txq->txb[txq->q.read_ptr].skb; + + /* can be called from irqs-disabled context */ + if (skb) { + dev_kfree_skb_any(skb); + txq->txb[txq->q.read_ptr].skb = NULL; + } + } +} + +/** + * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: + * +*/ +void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, + struct iwl_device_cmd *cmd, + struct ieee80211_tx_info *info, + struct ieee80211_hdr *hdr, + int sta_id, int tx_id) +{ + u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value; + u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945); + u16 rate_mask; + int rate; + u8 rts_retry_limit; + u8 data_retry_limit; + __le32 tx_flags; + __le16 fc = hdr->frame_control; + struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; + + rate = iwl3945_rates[rate_index].plcp; + tx_flags = tx_cmd->tx_flags; + + /* We need to figure out how to get the sta->supp_rates while + * in this running context */ + rate_mask = IWL_RATES_MASK_3945; + + /* Set retry limit on DATA packets and Probe Responses*/ + if (ieee80211_is_probe_resp(fc)) + data_retry_limit = 3; + else + data_retry_limit = IWL_DEFAULT_TX_RETRY; + tx_cmd->data_retry_limit = data_retry_limit; + + if (tx_id >= IWL39_CMD_QUEUE_NUM) + rts_retry_limit = 3; + else + rts_retry_limit = 7; + + if (data_retry_limit < rts_retry_limit) + rts_retry_limit = data_retry_limit; + tx_cmd->rts_retry_limit = rts_retry_limit; + + tx_cmd->rate = rate; + tx_cmd->tx_flags = tx_flags; + + /* OFDM */ + tx_cmd->supp_rates[0] = + ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF; + + /* CCK */ + tx_cmd->supp_rates[1] = (rate_mask & 0xF); + + IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " + "cck/ofdm mask: 0x%x/0x%x\n", sta_id, + tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags), + tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]); +} + +static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate) +{ + unsigned long flags_spin; + struct iwl_station_entry *station; + + if (sta_id == IWL_INVALID_STATION) + return IWL_INVALID_STATION; + + spin_lock_irqsave(&priv->sta_lock, flags_spin); + station = &priv->stations[sta_id]; + + station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; + station->sta.rate_n_flags = cpu_to_le16(tx_rate); + station->sta.mode = STA_CONTROL_MODIFY_MSK; + iwl_legacy_send_add_sta(priv, &station->sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + + IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n", + sta_id, tx_rate); + return sta_id; +} + +static void iwl3945_set_pwr_vmain(struct iwl_priv *priv) +{ +/* + * (for documentation purposes) + * to set power to V_AUX, do + + if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) { + iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + + iwl_poll_bit(priv, CSR_GPIO_IN, + CSR_GPIO_IN_VAL_VAUX_PWR_SRC, + CSR_GPIO_IN_BIT_AUX_POWER, 5000); + } + */ + + iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + + iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, + CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */ +} + +static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + iwl_legacy_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); + iwl_legacy_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), + rxq->rb_stts_dma); + iwl_legacy_write_direct32(priv, FH39_RCSR_WPTR(0), 0); + iwl_legacy_write_direct32(priv, FH39_RCSR_CONFIG(0), + FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | + FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | + FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | + FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | + (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) | + FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | + (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) | + FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); + + /* fake read to flush all prev I/O */ + iwl_legacy_read_direct32(priv, FH39_RSSR_CTRL); + + return 0; +} + +static int iwl3945_tx_reset(struct iwl_priv *priv) +{ + + /* bypass mode */ + iwl_legacy_write_prph(priv, ALM_SCD_MODE_REG, 0x2); + + /* RA 0 is active */ + iwl_legacy_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01); + + /* all 6 fifo are active */ + iwl_legacy_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f); + + iwl_legacy_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000); + iwl_legacy_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002); + iwl_legacy_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004); + iwl_legacy_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005); + + iwl_legacy_write_direct32(priv, FH39_TSSR_CBB_BASE, + priv->_3945.shared_phys); + + iwl_legacy_write_direct32(priv, FH39_TSSR_MSG_CONFIG, + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); + + + return 0; +} + +/** + * iwl3945_txq_ctx_reset - Reset TX queue context + * + * Destroys all DMA structures and initialize them again + */ +static int iwl3945_txq_ctx_reset(struct iwl_priv *priv) +{ + int rc; + int txq_id, slots_num; + + iwl3945_hw_txq_ctx_free(priv); + + /* allocate tx queue structure */ + rc = iwl_legacy_alloc_txq_mem(priv); + if (rc) + return rc; + + /* Tx CMD queue */ + rc = iwl3945_tx_reset(priv); + if (rc) + goto error; + + /* Tx queue(s) */ + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { + slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ? + TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; + rc = iwl_legacy_tx_queue_init(priv, &priv->txq[txq_id], + slots_num, txq_id); + if (rc) { + IWL_ERR(priv, "Tx %d queue init failed\n", txq_id); + goto error; + } + } + + return rc; + + error: + iwl3945_hw_txq_ctx_free(priv); + return rc; +} + + +/* + * Start up 3945's basic functionality after it has been reset + * (e.g. after platform boot, or shutdown via iwl_legacy_apm_stop()) + * NOTE: This does not load uCode nor start the embedded processor + */ +static int iwl3945_apm_init(struct iwl_priv *priv) +{ + int ret = iwl_legacy_apm_init(priv); + + /* Clear APMG (NIC's internal power management) interrupts */ + iwl_legacy_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0); + iwl_legacy_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); + + /* Reset radio chip */ + iwl_legacy_set_bits_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); + udelay(5); + iwl_legacy_clear_bits_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); + + return ret; +} + +static void iwl3945_nic_config(struct iwl_priv *priv) +{ + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + unsigned long flags; + u8 rev_id = priv->pci_dev->revision; + + spin_lock_irqsave(&priv->lock, flags); + + /* Determine HW type */ + IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id); + + if (rev_id & PCI_CFG_REV_ID_BIT_RTP) + IWL_DEBUG_INFO(priv, "RTP type\n"); + else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { + IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n"); + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); + } else { + IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n"); + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); + } + + if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { + IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n"); + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); + } else + IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n"); + + if ((eeprom->board_revision & 0xF0) == 0xD0) { + IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n", + eeprom->board_revision); + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); + } else { + IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n", + eeprom->board_revision); + iwl_legacy_clear_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); + } + + if (eeprom->almgor_m_version <= 1) { + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); + IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n", + eeprom->almgor_m_version); + } else { + IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n", + eeprom->almgor_m_version); + iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); + } + spin_unlock_irqrestore(&priv->lock, flags); + + if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) + IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n"); + + if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) + IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n"); +} + +int iwl3945_hw_nic_init(struct iwl_priv *priv) +{ + int rc; + unsigned long flags; + struct iwl_rx_queue *rxq = &priv->rxq; + + spin_lock_irqsave(&priv->lock, flags); + priv->cfg->ops->lib->apm_ops.init(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl3945_set_pwr_vmain(priv); + + priv->cfg->ops->lib->apm_ops.config(priv); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + rc = iwl_legacy_rx_queue_alloc(priv); + if (rc) { + IWL_ERR(priv, "Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + iwl3945_rx_queue_reset(priv, rxq); + + iwl3945_rx_replenish(priv); + + iwl3945_rx_init(priv, rxq); + + + /* Look at using this instead: + rxq->need_update = 1; + iwl_legacy_rx_queue_update_write_ptr(priv, rxq); + */ + + iwl_legacy_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7); + + rc = iwl3945_txq_ctx_reset(priv); + if (rc) + return rc; + + set_bit(STATUS_INIT, &priv->status); + + return 0; +} + +/** + * iwl3945_hw_txq_ctx_free - Free TXQ Context + * + * Destroy all TX DMA queues and structures + */ +void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv) +{ + int txq_id; + + /* Tx queues */ + if (priv->txq) + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; + txq_id++) + if (txq_id == IWL39_CMD_QUEUE_NUM) + iwl_legacy_cmd_queue_free(priv); + else + iwl_legacy_tx_queue_free(priv, txq_id); + + /* free tx queue structure */ + iwl_legacy_txq_mem(priv); +} + +void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv) +{ + int txq_id; + + /* stop SCD */ + iwl_legacy_write_prph(priv, ALM_SCD_MODE_REG, 0); + iwl_legacy_write_prph(priv, ALM_SCD_TXFACT_REG, 0); + + /* reset TFD queues */ + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { + iwl_legacy_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0); + iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS, + FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), + 1000); + } + + iwl3945_hw_txq_ctx_free(priv); +} + +/** + * iwl3945_hw_reg_adjust_power_by_temp + * return index delta into power gain settings table +*/ +static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) +{ + return (new_reading - old_reading) * (-11) / 100; +} + +/** + * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range + */ +static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) +{ + return ((temperature < -260) || (temperature > 25)) ? 1 : 0; +} + +int iwl3945_hw_get_temperature(struct iwl_priv *priv) +{ + return iwl_read32(priv, CSR_UCODE_DRV_GP2); +} + +/** + * iwl3945_hw_reg_txpower_get_temperature + * get the current temperature by reading from NIC +*/ +static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv) +{ + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + int temperature; + + temperature = iwl3945_hw_get_temperature(priv); + + /* driver's okay range is -260 to +25. + * human readable okay range is 0 to +285 */ + IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT); + + /* handle insane temp reading */ + if (iwl3945_hw_reg_temp_out_of_range(temperature)) { + IWL_ERR(priv, "Error bad temperature value %d\n", temperature); + + /* if really really hot(?), + * substitute the 3rd band/group's temp measured at factory */ + if (priv->last_temperature > 100) + temperature = eeprom->groups[2].temperature; + else /* else use most recent "sane" value from driver */ + temperature = priv->last_temperature; + } + + return temperature; /* raw, not "human readable" */ +} + +/* Adjust Txpower only if temperature variance is greater than threshold. + * + * Both are lower than older versions' 9 degrees */ +#define IWL_TEMPERATURE_LIMIT_TIMER 6 + +/** + * iwl3945_is_temp_calib_needed - determines if new calibration is needed + * + * records new temperature in tx_mgr->temperature. + * replaces tx_mgr->last_temperature *only* if calib needed + * (assumes caller will actually do the calibration!). */ +static int iwl3945_is_temp_calib_needed(struct iwl_priv *priv) +{ + int temp_diff; + + priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv); + temp_diff = priv->temperature - priv->last_temperature; + + /* get absolute value */ + if (temp_diff < 0) { + IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff); + temp_diff = -temp_diff; + } else if (temp_diff == 0) + IWL_DEBUG_POWER(priv, "Same temp,\n"); + else + IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff); + + /* if we don't need calibration, *don't* update last_temperature */ + if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) { + IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n"); + return 0; + } + + IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n"); + + /* assume that caller will actually do calib ... + * update the "last temperature" value */ + priv->last_temperature = priv->temperature; + return 1; +} + +#define IWL_MAX_GAIN_ENTRIES 78 +#define IWL_CCK_FROM_OFDM_POWER_DIFF -5 +#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10) + +/* radio and DSP power table, each step is 1/2 dB. + * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ +static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = { + { + {251, 127}, /* 2.4 GHz, highest power */ + {251, 127}, + {251, 127}, + {251, 127}, + {251, 125}, + {251, 110}, + {251, 105}, + {251, 98}, + {187, 125}, + {187, 115}, + {187, 108}, + {187, 99}, + {243, 119}, + {243, 111}, + {243, 105}, + {243, 97}, + {243, 92}, + {211, 106}, + {211, 100}, + {179, 120}, + {179, 113}, + {179, 107}, + {147, 125}, + {147, 119}, + {147, 112}, + {147, 106}, + {147, 101}, + {147, 97}, + {147, 91}, + {115, 107}, + {235, 121}, + {235, 115}, + {235, 109}, + {203, 127}, + {203, 121}, + {203, 115}, + {203, 108}, + {203, 102}, + {203, 96}, + {203, 92}, + {171, 110}, + {171, 104}, + {171, 98}, + {139, 116}, + {227, 125}, + {227, 119}, + {227, 113}, + {227, 107}, + {227, 101}, + {227, 96}, + {195, 113}, + {195, 106}, + {195, 102}, + {195, 95}, + {163, 113}, + {163, 106}, + {163, 102}, + {163, 95}, + {131, 113}, + {131, 106}, + {131, 102}, + {131, 95}, + {99, 113}, + {99, 106}, + {99, 102}, + {99, 95}, + {67, 113}, + {67, 106}, + {67, 102}, + {67, 95}, + {35, 113}, + {35, 106}, + {35, 102}, + {35, 95}, + {3, 113}, + {3, 106}, + {3, 102}, + {3, 95} }, /* 2.4 GHz, lowest power */ + { + {251, 127}, /* 5.x GHz, highest power */ + {251, 120}, + {251, 114}, + {219, 119}, + {219, 101}, + {187, 113}, + {187, 102}, + {155, 114}, + {155, 103}, + {123, 117}, + {123, 107}, + {123, 99}, + {123, 92}, + {91, 108}, + {59, 125}, + {59, 118}, + {59, 109}, + {59, 102}, + {59, 96}, + {59, 90}, + {27, 104}, + {27, 98}, + {27, 92}, + {115, 118}, + {115, 111}, + {115, 104}, + {83, 126}, + {83, 121}, + {83, 113}, + {83, 105}, + {83, 99}, + {51, 118}, + {51, 111}, + {51, 104}, + {51, 98}, + {19, 116}, + {19, 109}, + {19, 102}, + {19, 98}, + {19, 93}, + {171, 113}, + {171, 107}, + {171, 99}, + {139, 120}, + {139, 113}, + {139, 107}, + {139, 99}, + {107, 120}, + {107, 113}, + {107, 107}, + {107, 99}, + {75, 120}, + {75, 113}, + {75, 107}, + {75, 99}, + {43, 120}, + {43, 113}, + {43, 107}, + {43, 99}, + {11, 120}, + {11, 113}, + {11, 107}, + {11, 99}, + {131, 107}, + {131, 99}, + {99, 120}, + {99, 113}, + {99, 107}, + {99, 99}, + {67, 120}, + {67, 113}, + {67, 107}, + {67, 99}, + {35, 120}, + {35, 113}, + {35, 107}, + {35, 99}, + {3, 120} } /* 5.x GHz, lowest power */ +}; + +static inline u8 iwl3945_hw_reg_fix_power_index(int index) +{ + if (index < 0) + return 0; + if (index >= IWL_MAX_GAIN_ENTRIES) + return IWL_MAX_GAIN_ENTRIES - 1; + return (u8) index; +} + +/* Kick off thermal recalibration check every 60 seconds */ +#define REG_RECALIB_PERIOD (60) + +/** + * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests + * + * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) + * or 6 Mbit (OFDM) rates. + */ +static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index, + s32 rate_index, const s8 *clip_pwrs, + struct iwl_channel_info *ch_info, + int band_index) +{ + struct iwl3945_scan_power_info *scan_power_info; + s8 power; + u8 power_index; + + scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index]; + + /* use this channel group's 6Mbit clipping/saturation pwr, + * but cap at regulatory scan power restriction (set during init + * based on eeprom channel data) for this channel. */ + power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]); + + power = min(power, priv->tx_power_user_lmt); + scan_power_info->requested_power = power; + + /* find difference between new scan *power* and current "normal" + * Tx *power* for 6Mb. Use this difference (x2) to adjust the + * current "normal" temperature-compensated Tx power *index* for + * this rate (1Mb or 6Mb) to yield new temp-compensated scan power + * *index*. */ + power_index = ch_info->power_info[rate_index].power_table_index + - (power - ch_info->power_info + [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2; + + /* store reference index that we use when adjusting *all* scan + * powers. So we can accommodate user (all channel) or spectrum + * management (single channel) power changes "between" temperature + * feedback compensation procedures. + * don't force fit this reference index into gain table; it may be a + * negative number. This will help avoid errors when we're at + * the lower bounds (highest gains, for warmest temperatures) + * of the table. */ + + /* don't exceed table bounds for "real" setting */ + power_index = iwl3945_hw_reg_fix_power_index(power_index); + + scan_power_info->power_table_index = power_index; + scan_power_info->tpc.tx_gain = + power_gain_table[band_index][power_index].tx_gain; + scan_power_info->tpc.dsp_atten = + power_gain_table[band_index][power_index].dsp_atten; +} + +/** + * iwl3945_send_tx_power - fill in Tx Power command with gain settings + * + * Configures power settings for all rates for the current channel, + * using values from channel info struct, and send to NIC + */ +static int iwl3945_send_tx_power(struct iwl_priv *priv) +{ + int rate_idx, i; + const struct iwl_channel_info *ch_info = NULL; + struct iwl3945_txpowertable_cmd txpower = { + .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel, + }; + u16 chan; + + if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel); + + txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1; + ch_info = iwl_legacy_get_channel_info(priv, priv->band, chan); + if (!ch_info) { + IWL_ERR(priv, + "Failed to get channel info for channel %d [%d]\n", + chan, priv->band); + return -EINVAL; + } + + if (!iwl_legacy_is_channel_valid(ch_info)) { + IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on " + "non-Tx channel.\n"); + return 0; + } + + /* fill cmd with power settings for all rates for current channel */ + /* Fill OFDM rate */ + for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0; + rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) { + + txpower.power[i].tpc = ch_info->power_info[i].tpc; + txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; + + IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n", + le16_to_cpu(txpower.channel), + txpower.band, + txpower.power[i].tpc.tx_gain, + txpower.power[i].tpc.dsp_atten, + txpower.power[i].rate); + } + /* Fill CCK rates */ + for (rate_idx = IWL_FIRST_CCK_RATE; + rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) { + txpower.power[i].tpc = ch_info->power_info[i].tpc; + txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; + + IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n", + le16_to_cpu(txpower.channel), + txpower.band, + txpower.power[i].tpc.tx_gain, + txpower.power[i].tpc.dsp_atten, + txpower.power[i].rate); + } + + return iwl_legacy_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, + sizeof(struct iwl3945_txpowertable_cmd), + &txpower); + +} + +/** + * iwl3945_hw_reg_set_new_power - Configures power tables at new levels + * @ch_info: Channel to update. Uses power_info.requested_power. + * + * Replace requested_power and base_power_index ch_info fields for + * one channel. + * + * Called if user or spectrum management changes power preferences. + * Takes into account h/w and modulation limitations (clip power). + * + * This does *not* send anything to NIC, just sets up ch_info for one channel. + * + * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to + * properly fill out the scan powers, and actual h/w gain settings, + * and send changes to NIC + */ +static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv, + struct iwl_channel_info *ch_info) +{ + struct iwl3945_channel_power_info *power_info; + int power_changed = 0; + int i; + const s8 *clip_pwrs; + int power; + + /* Get this chnlgrp's rate-to-max/clip-powers table */ + clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; + + /* Get this channel's rate-to-current-power settings table */ + power_info = ch_info->power_info; + + /* update OFDM Txpower settings */ + for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; + i++, ++power_info) { + int delta_idx; + + /* limit new power to be no more than h/w capability */ + power = min(ch_info->curr_txpow, clip_pwrs[i]); + if (power == power_info->requested_power) + continue; + + /* find difference between old and new requested powers, + * update base (non-temp-compensated) power index */ + delta_idx = (power - power_info->requested_power) * 2; + power_info->base_power_index -= delta_idx; + + /* save new requested power value */ + power_info->requested_power = power; + + power_changed = 1; + } + + /* update CCK Txpower settings, based on OFDM 12M setting ... + * ... all CCK power settings for a given channel are the *same*. */ + if (power_changed) { + power = + ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. + requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; + + /* do all CCK rates' iwl3945_channel_power_info structures */ + for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) { + power_info->requested_power = power; + power_info->base_power_index = + ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. + base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; + ++power_info; + } + } + + return 0; +} + +/** + * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel + * + * NOTE: Returned power limit may be less (but not more) than requested, + * based strictly on regulatory (eeprom and spectrum mgt) limitations + * (no consideration for h/w clipping limitations). + */ +static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info) +{ + s8 max_power; + +#if 0 + /* if we're using TGd limits, use lower of TGd or EEPROM */ + if (ch_info->tgd_data.max_power != 0) + max_power = min(ch_info->tgd_data.max_power, + ch_info->eeprom.max_power_avg); + + /* else just use EEPROM limits */ + else +#endif + max_power = ch_info->eeprom.max_power_avg; + + return min(max_power, ch_info->max_power_avg); +} + +/** + * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature + * + * Compensate txpower settings of *all* channels for temperature. + * This only accounts for the difference between current temperature + * and the factory calibration temperatures, and bases the new settings + * on the channel's base_power_index. + * + * If RxOn is "associated", this sends the new Txpower to NIC! + */ +static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv) +{ + struct iwl_channel_info *ch_info = NULL; + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + int delta_index; + const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ + u8 a_band; + u8 rate_index; + u8 scan_tbl_index; + u8 i; + int ref_temp; + int temperature = priv->temperature; + + if (priv->disable_tx_power_cal || + test_bit(STATUS_SCANNING, &priv->status)) { + /* do not perform tx power calibration */ + return 0; + } + /* set up new Tx power info for each and every channel, 2.4 and 5.x */ + for (i = 0; i < priv->channel_count; i++) { + ch_info = &priv->channel_info[i]; + a_band = iwl_legacy_is_channel_a_band(ch_info); + + /* Get this chnlgrp's factory calibration temperature */ + ref_temp = (s16)eeprom->groups[ch_info->group_index]. + temperature; + + /* get power index adjustment based on current and factory + * temps */ + delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, + ref_temp); + + /* set tx power value for all rates, OFDM and CCK */ + for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945; + rate_index++) { + int power_idx = + ch_info->power_info[rate_index].base_power_index; + + /* temperature compensate */ + power_idx += delta_index; + + /* stay within table range */ + power_idx = iwl3945_hw_reg_fix_power_index(power_idx); + ch_info->power_info[rate_index]. + power_table_index = (u8) power_idx; + ch_info->power_info[rate_index].tpc = + power_gain_table[a_band][power_idx]; + } + + /* Get this chnlgrp's rate-to-max/clip-powers table */ + clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; + + /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ + for (scan_tbl_index = 0; + scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { + s32 actual_index = (scan_tbl_index == 0) ? + IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; + iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, + actual_index, clip_pwrs, + ch_info, a_band); + } + } + + /* send Txpower command for current channel to ucode */ + return priv->cfg->ops->lib->send_tx_power(priv); +} + +int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) +{ + struct iwl_channel_info *ch_info; + s8 max_power; + u8 a_band; + u8 i; + + if (priv->tx_power_user_lmt == power) { + IWL_DEBUG_POWER(priv, "Requested Tx power same as current " + "limit: %ddBm.\n", power); + return 0; + } + + IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power); + priv->tx_power_user_lmt = power; + + /* set up new Tx powers for each and every channel, 2.4 and 5.x */ + + for (i = 0; i < priv->channel_count; i++) { + ch_info = &priv->channel_info[i]; + a_band = iwl_legacy_is_channel_a_band(ch_info); + + /* find minimum power of all user and regulatory constraints + * (does not consider h/w clipping limitations) */ + max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info); + max_power = min(power, max_power); + if (max_power != ch_info->curr_txpow) { + ch_info->curr_txpow = max_power; + + /* this considers the h/w clipping limitations */ + iwl3945_hw_reg_set_new_power(priv, ch_info); + } + } + + /* update txpower settings for all channels, + * send to NIC if associated. */ + iwl3945_is_temp_calib_needed(priv); + iwl3945_hw_reg_comp_txpower_temp(priv); + + return 0; +} + +static int iwl3945_send_rxon_assoc(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int rc = 0; + struct iwl_rx_packet *pkt; + struct iwl3945_rxon_assoc_cmd rxon_assoc; + struct iwl_host_cmd cmd = { + .id = REPLY_RXON_ASSOC, + .len = sizeof(rxon_assoc), + .flags = CMD_WANT_SKB, + .data = &rxon_assoc, + }; + const struct iwl_legacy_rxon_cmd *rxon1 = &ctx->staging; + const struct iwl_legacy_rxon_cmd *rxon2 = &ctx->active; + + if ((rxon1->flags == rxon2->flags) && + (rxon1->filter_flags == rxon2->filter_flags) && + (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && + (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { + IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = ctx->staging.flags; + rxon_assoc.filter_flags = ctx->staging.filter_flags; + rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; + rxon_assoc.reserved = 0; + + rc = iwl_legacy_send_cmd_sync(priv, &cmd); + if (rc) + return rc; + + pkt = (struct iwl_rx_packet *)cmd.reply_page; + if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n"); + rc = -EIO; + } + + iwl_legacy_free_pages(priv, cmd.reply_page); + + return rc; +} + +/** + * iwl3945_commit_rxon - commit staging_rxon to hardware + * + * The RXON command in staging_rxon is committed to the hardware and + * the active_rxon structure is updated with the new data. This + * function correctly transitions out of the RXON_ASSOC_MSK state if + * a HW tune is required based on the RXON structure changes. + */ +int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + /* cast away the const for active_rxon in this function */ + struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active; + struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging; + int rc = 0; + bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return -EINVAL; + + if (!iwl_legacy_is_alive(priv)) + return -1; + + /* always get timestamp with Rx frame */ + staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; + + /* select antenna */ + staging_rxon->flags &= + ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); + staging_rxon->flags |= iwl3945_get_antenna_flags(priv); + + rc = iwl_legacy_check_rxon_cmd(priv, ctx); + if (rc) { + IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* If we don't need to send a full RXON, we can use + * iwl3945_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!iwl_legacy_full_rxon_required(priv, + &priv->contexts[IWL_RXON_CTX_BSS])) { + rc = iwl_legacy_send_rxon_assoc(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + if (rc) { + IWL_ERR(priv, "Error setting RXON_ASSOC " + "configuration (%d).\n", rc); + return rc; + } + + memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); + + return 0; + } + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) { + IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + /* + * reserved4 and 5 could have been filled by the iwlcore code. + * Let's clear them before pushing to the 3945. + */ + active_rxon->reserved4 = 0; + active_rxon->reserved5 = 0; + rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl3945_rxon_cmd), + &priv->contexts[IWL_RXON_CTX_BSS].active); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (rc) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IWL_ERR(priv, "Error clearing ASSOC_MSK on current " + "configuration (%d).\n", rc); + return rc; + } + iwl_legacy_clear_ucode_stations(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + iwl_legacy_restore_stations(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + } + + IWL_DEBUG_INFO(priv, "Sending RXON\n" + "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" + "* bssid = %pM\n", + (new_assoc ? "" : "out"), + le16_to_cpu(staging_rxon->channel), + staging_rxon->bssid_addr); + + /* + * reserved4 and 5 could have been filled by the iwlcore code. + * Let's clear them before pushing to the 3945. + */ + staging_rxon->reserved4 = 0; + staging_rxon->reserved5 = 0; + + iwl_legacy_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto); + + /* Apply the new configuration */ + rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl3945_rxon_cmd), + staging_rxon); + if (rc) { + IWL_ERR(priv, "Error setting new configuration (%d).\n", rc); + return rc; + } + + memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); + + if (!new_assoc) { + iwl_legacy_clear_ucode_stations(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + iwl_legacy_restore_stations(priv, + &priv->contexts[IWL_RXON_CTX_BSS]); + } + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + rc = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); + if (rc) { + IWL_ERR(priv, "Error setting Tx power (%d).\n", rc); + return rc; + } + + /* Init the hardware's rate fallback order based on the band */ + rc = iwl3945_init_hw_rate_table(priv); + if (rc) { + IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc); + return -EIO; + } + + return 0; +} + +/** + * iwl3945_reg_txpower_periodic - called when time to check our temperature. + * + * -- reset periodic timer + * -- see if temp has changed enough to warrant re-calibration ... if so: + * -- correct coeffs for temp (can reset temp timer) + * -- save this temp as "last", + * -- send new set of gain settings to NIC + * NOTE: This should continue working, even when we're not associated, + * so we can keep our internal table of scan powers current. */ +void iwl3945_reg_txpower_periodic(struct iwl_priv *priv) +{ + /* This will kick in the "brute force" + * iwl3945_hw_reg_comp_txpower_temp() below */ + if (!iwl3945_is_temp_calib_needed(priv)) + goto reschedule; + + /* Set up a new set of temp-adjusted TxPowers, send to NIC. + * This is based *only* on current temperature, + * ignoring any previous power measurements */ + iwl3945_hw_reg_comp_txpower_temp(priv); + + reschedule: + queue_delayed_work(priv->workqueue, + &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ); +} + +static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, + _3945.thermal_periodic.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl3945_reg_txpower_periodic(priv); + mutex_unlock(&priv->mutex); +} + +/** + * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4) + * for the channel. + * + * This function is used when initializing channel-info structs. + * + * NOTE: These channel groups do *NOT* match the bands above! + * These channel groups are based on factory-tested channels; + * on A-band, EEPROM's "group frequency" entries represent the top + * channel in each group 1-4. Group 5 All B/G channels are in group 0. + */ +static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv, + const struct iwl_channel_info *ch_info) +{ + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; + u8 group; + u16 group_index = 0; /* based on factory calib frequencies */ + u8 grp_channel; + + /* Find the group index for the channel ... don't use index 1(?) */ + if (iwl_legacy_is_channel_a_band(ch_info)) { + for (group = 1; group < 5; group++) { + grp_channel = ch_grp[group].group_channel; + if (ch_info->channel <= grp_channel) { + group_index = group; + break; + } + } + /* group 4 has a few channels *above* its factory cal freq */ + if (group == 5) + group_index = 4; + } else + group_index = 0; /* 2.4 GHz, group 0 */ + + IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel, + group_index); + return group_index; +} + +/** + * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index + * + * Interpolate to get nominal (i.e. at factory calibration temperature) index + * into radio/DSP gain settings table for requested power. + */ +static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv, + s8 requested_power, + s32 setting_index, s32 *new_index) +{ + const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL; + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + s32 index0, index1; + s32 power = 2 * requested_power; + s32 i; + const struct iwl3945_eeprom_txpower_sample *samples; + s32 gains0, gains1; + s32 res; + s32 denominator; + + chnl_grp = &eeprom->groups[setting_index]; + samples = chnl_grp->samples; + for (i = 0; i < 5; i++) { + if (power == samples[i].power) { + *new_index = samples[i].gain_index; + return 0; + } + } + + if (power > samples[1].power) { + index0 = 0; + index1 = 1; + } else if (power > samples[2].power) { + index0 = 1; + index1 = 2; + } else if (power > samples[3].power) { + index0 = 2; + index1 = 3; + } else { + index0 = 3; + index1 = 4; + } + + denominator = (s32) samples[index1].power - (s32) samples[index0].power; + if (denominator == 0) + return -EINVAL; + gains0 = (s32) samples[index0].gain_index * (1 << 19); + gains1 = (s32) samples[index1].gain_index * (1 << 19); + res = gains0 + (gains1 - gains0) * + ((s32) power - (s32) samples[index0].power) / denominator + + (1 << 18); + *new_index = res >> 19; + return 0; +} + +static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv) +{ + u32 i; + s32 rate_index; + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + const struct iwl3945_eeprom_txpower_group *group; + + IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n"); + + for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) { + s8 *clip_pwrs; /* table of power levels for each rate */ + s8 satur_pwr; /* saturation power for each chnl group */ + group = &eeprom->groups[i]; + + /* sanity check on factory saturation power value */ + if (group->saturation_power < 40) { + IWL_WARN(priv, "Error: saturation power is %d, " + "less than minimum expected 40\n", + group->saturation_power); + return; + } + + /* + * Derive requested power levels for each rate, based on + * hardware capabilities (saturation power for band). + * Basic value is 3dB down from saturation, with further + * power reductions for highest 3 data rates. These + * backoffs provide headroom for high rate modulation + * power peaks, without too much distortion (clipping). + */ + /* we'll fill in this array with h/w max power levels */ + clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers; + + /* divide factory saturation power by 2 to find -3dB level */ + satur_pwr = (s8) (group->saturation_power >> 1); + + /* fill in channel group's nominal powers for each rate */ + for (rate_index = 0; + rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) { + switch (rate_index) { + case IWL_RATE_36M_INDEX_TABLE: + if (i == 0) /* B/G */ + *clip_pwrs = satur_pwr; + else /* A */ + *clip_pwrs = satur_pwr - 5; + break; + case IWL_RATE_48M_INDEX_TABLE: + if (i == 0) + *clip_pwrs = satur_pwr - 7; + else + *clip_pwrs = satur_pwr - 10; + break; + case IWL_RATE_54M_INDEX_TABLE: + if (i == 0) + *clip_pwrs = satur_pwr - 9; + else + *clip_pwrs = satur_pwr - 12; + break; + default: + *clip_pwrs = satur_pwr; + break; + } + } + } +} + +/** + * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM + * + * Second pass (during init) to set up priv->channel_info + * + * Set up Tx-power settings in our channel info database for each VALID + * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values + * and current temperature. + * + * Since this is based on current temperature (at init time), these values may + * not be valid for very long, but it gives us a starting/default point, + * and allows us to active (i.e. using Tx) scan. + * + * This does *not* write values to NIC, just sets up our internal table. + */ +int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv) +{ + struct iwl_channel_info *ch_info = NULL; + struct iwl3945_channel_power_info *pwr_info; + struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; + int delta_index; + u8 rate_index; + u8 scan_tbl_index; + const s8 *clip_pwrs; /* array of power levels for each rate */ + u8 gain, dsp_atten; + s8 power; + u8 pwr_index, base_pwr_index, a_band; + u8 i; + int temperature; + + /* save temperature reference, + * so we can determine next time to calibrate */ + temperature = iwl3945_hw_reg_txpower_get_temperature(priv); + priv->last_temperature = temperature; + + iwl3945_hw_reg_init_channel_groups(priv); + + /* initialize Tx power info for each and every channel, 2.4 and 5.x */ + for (i = 0, ch_info = priv->channel_info; i < priv->channel_count; + i++, ch_info++) { + a_band = iwl_legacy_is_channel_a_band(ch_info); + if (!iwl_legacy_is_channel_valid(ch_info)) + continue; + + /* find this channel's channel group (*not* "band") index */ + ch_info->group_index = + iwl3945_hw_reg_get_ch_grp_index(priv, ch_info); + + /* Get this chnlgrp's rate->max/clip-powers table */ + clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; + + /* calculate power index *adjustment* value according to + * diff between current temperature and factory temperature */ + delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, + eeprom->groups[ch_info->group_index]. + temperature); + + IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n", + ch_info->channel, delta_index, temperature + + IWL_TEMP_CONVERT); + + /* set tx power value for all OFDM rates */ + for (rate_index = 0; rate_index < IWL_OFDM_RATES; + rate_index++) { + s32 uninitialized_var(power_idx); + int rc; + + /* use channel group's clip-power table, + * but don't exceed channel's max power */ + s8 pwr = min(ch_info->max_power_avg, + clip_pwrs[rate_index]); + + pwr_info = &ch_info->power_info[rate_index]; + + /* get base (i.e. at factory-measured temperature) + * power table index for this rate's power */ + rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr, + ch_info->group_index, + &power_idx); + if (rc) { + IWL_ERR(priv, "Invalid power index\n"); + return rc; + } + pwr_info->base_power_index = (u8) power_idx; + + /* temperature compensate */ + power_idx += delta_index; + + /* stay within range of gain table */ + power_idx = iwl3945_hw_reg_fix_power_index(power_idx); + + /* fill 1 OFDM rate's iwl3945_channel_power_info struct */ + pwr_info->requested_power = pwr; + pwr_info->power_table_index = (u8) power_idx; + pwr_info->tpc.tx_gain = + power_gain_table[a_band][power_idx].tx_gain; + pwr_info->tpc.dsp_atten = + power_gain_table[a_band][power_idx].dsp_atten; + } + + /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/ + pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]; + power = pwr_info->requested_power + + IWL_CCK_FROM_OFDM_POWER_DIFF; + pwr_index = pwr_info->power_table_index + + IWL_CCK_FROM_OFDM_INDEX_DIFF; + base_pwr_index = pwr_info->base_power_index + + IWL_CCK_FROM_OFDM_INDEX_DIFF; + + /* stay within table range */ + pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index); + gain = power_gain_table[a_band][pwr_index].tx_gain; + dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten; + + /* fill each CCK rate's iwl3945_channel_power_info structure + * NOTE: All CCK-rate Txpwrs are the same for a given chnl! + * NOTE: CCK rates start at end of OFDM rates! */ + for (rate_index = 0; + rate_index < IWL_CCK_RATES; rate_index++) { + pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES]; + pwr_info->requested_power = power; + pwr_info->power_table_index = pwr_index; + pwr_info->base_power_index = base_pwr_index; + pwr_info->tpc.tx_gain = gain; + pwr_info->tpc.dsp_atten = dsp_atten; + } + + /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ + for (scan_tbl_index = 0; + scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { + s32 actual_index = (scan_tbl_index == 0) ? + IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; + iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, + actual_index, clip_pwrs, ch_info, a_band); + } + } + + return 0; +} + +int iwl3945_hw_rxq_stop(struct iwl_priv *priv) +{ + int rc; + + iwl_legacy_write_direct32(priv, FH39_RCSR_CONFIG(0), 0); + rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS, + FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); + if (rc < 0) + IWL_ERR(priv, "Can't stop Rx DMA.\n"); + + return 0; +} + +int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq) +{ + int txq_id = txq->q.id; + + struct iwl3945_shared *shared_data = priv->_3945.shared_virt; + + shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr); + + iwl_legacy_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0); + iwl_legacy_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0); + + iwl_legacy_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), + FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | + FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | + FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | + FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | + FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); + + /* fake read to flush all prev. writes */ + iwl_read32(priv, FH39_TSSR_CBB_BASE); + + return 0; +} + +/* + * HCMD utils + */ +static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len) +{ + switch (cmd_id) { + case REPLY_RXON: + return sizeof(struct iwl3945_rxon_cmd); + case POWER_TABLE_CMD: + return sizeof(struct iwl3945_powertable_cmd); + default: + return len; + } +} + + +static u16 iwl3945_build_addsta_hcmd(const struct iwl_legacy_addsta_cmd *cmd, + u8 *data) +{ + struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cpu_to_le16(0); + addsta->rate_n_flags = cmd->rate_n_flags; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + + return (u16)sizeof(struct iwl3945_addsta_cmd); +} + +static int iwl3945_add_bssid_station(struct iwl_priv *priv, + const u8 *addr, u8 *sta_id_r) +{ + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + int ret; + u8 sta_id; + unsigned long flags; + + if (sta_id_r) + *sta_id_r = IWL_INVALID_STATION; + + ret = iwl_legacy_add_station_common(priv, ctx, addr, 0, NULL, &sta_id); + if (ret) { + IWL_ERR(priv, "Unable to add station %pM\n", addr); + return ret; + } + + if (sta_id_r) + *sta_id_r = sta_id; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].used |= IWL_STA_LOCAL; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return 0; +} +static int iwl3945_manage_ibss_station(struct iwl_priv *priv, + struct ieee80211_vif *vif, bool add) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + int ret; + + if (add) { + ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + if (ret) + return ret; + + iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id, + (priv->band == IEEE80211_BAND_5GHZ) ? + IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP); + iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id); + + return 0; + } + + return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +/** + * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table + */ +int iwl3945_init_hw_rate_table(struct iwl_priv *priv) +{ + int rc, i, index, prev_index; + struct iwl3945_rate_scaling_cmd rate_cmd = { + .reserved = {0, 0, 0}, + }; + struct iwl3945_rate_scaling_info *table = rate_cmd.table; + + for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) { + index = iwl3945_rates[i].table_rs_index; + + table[index].rate_n_flags = + iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0); + table[index].try_cnt = priv->retry_rate; + prev_index = iwl3945_get_prev_ieee_rate(i); + table[index].next_rate_index = + iwl3945_rates[prev_index].table_rs_index; + } + + switch (priv->band) { + case IEEE80211_BAND_5GHZ: + IWL_DEBUG_RATE(priv, "Select A mode rate scale\n"); + /* If one of the following CCK rates is used, + * have it fall back to the 6M OFDM rate */ + for (i = IWL_RATE_1M_INDEX_TABLE; + i <= IWL_RATE_11M_INDEX_TABLE; i++) + table[i].next_rate_index = + iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; + + /* Don't fall back to CCK rates */ + table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = + IWL_RATE_9M_INDEX_TABLE; + + /* Don't drop out of OFDM rates */ + table[IWL_RATE_6M_INDEX_TABLE].next_rate_index = + iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; + break; + + case IEEE80211_BAND_2GHZ: + IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n"); + /* If an OFDM rate is used, have it fall back to the + * 1M CCK rates */ + + if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) && + iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) { + + index = IWL_FIRST_CCK_RATE; + for (i = IWL_RATE_6M_INDEX_TABLE; + i <= IWL_RATE_54M_INDEX_TABLE; i++) + table[i].next_rate_index = + iwl3945_rates[index].table_rs_index; + + index = IWL_RATE_11M_INDEX_TABLE; + /* CCK shouldn't fall back to OFDM... */ + table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE; + } + break; + + default: + WARN_ON(1); + break; + } + + /* Update the rate scaling for control frame Tx */ + rate_cmd.table_id = 0; + rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), + &rate_cmd); + if (rc) + return rc; + + /* Update the rate scaling for data frame Tx */ + rate_cmd.table_id = 1; + return iwl_legacy_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), + &rate_cmd); +} + +/* Called when initializing driver */ +int iwl3945_hw_set_hw_params(struct iwl_priv *priv) +{ + memset((void *)&priv->hw_params, 0, + sizeof(struct iwl_hw_params)); + + priv->_3945.shared_virt = + dma_alloc_coherent(&priv->pci_dev->dev, + sizeof(struct iwl3945_shared), + &priv->_3945.shared_phys, GFP_KERNEL); + if (!priv->_3945.shared_virt) { + IWL_ERR(priv, "failed to allocate pci memory\n"); + return -ENOMEM; + } + + /* Assign number of Usable TX queues */ + priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; + + priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd); + priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K); + priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; + priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + priv->hw_params.max_stations = IWL3945_STATION_COUNT; + priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID; + + priv->sta_key_max_num = STA_KEY_MAX_NUM; + + priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; + priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL; + priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS; + + return 0; +} + +unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl3945_frame *frame, u8 rate) +{ + struct iwl3945_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = + priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = iwl3945_fill_beacon_frame(priv, + tx_beacon_cmd->frame, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + + tx_beacon_cmd->tx.rate = rate; + tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK); + + /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/ + tx_beacon_cmd->tx.supp_rates[0] = + (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; + + tx_beacon_cmd->tx.supp_rates[1] = + (IWL_CCK_BASIC_RATES_MASK & 0xF); + + return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; +} + +void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx; + priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx; +} + +void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv) +{ + INIT_DELAYED_WORK(&priv->_3945.thermal_periodic, + iwl3945_bg_reg_txpower_periodic); +} + +void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv) +{ + cancel_delayed_work(&priv->_3945.thermal_periodic); +} + +/* check contents of special bootstrap uCode SRAM */ +static int iwl3945_verify_bsm(struct iwl_priv *priv) + { + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + u32 reg; + u32 val; + + IWL_DEBUG_INFO(priv, "Begin verify bsm\n"); + + /* verify BSM SRAM contents */ + val = iwl_legacy_read_prph(priv, BSM_WR_DWCOUNT_REG); + for (reg = BSM_SRAM_LOWER_BOUND; + reg < BSM_SRAM_LOWER_BOUND + len; + reg += sizeof(u32), image++) { + val = iwl_legacy_read_prph(priv, reg); + if (val != le32_to_cpu(*image)) { + IWL_ERR(priv, "BSM uCode verification failed at " + "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", + BSM_SRAM_LOWER_BOUND, + reg - BSM_SRAM_LOWER_BOUND, len, + val, le32_to_cpu(*image)); + return -EIO; + } + } + + IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n"); + + return 0; +} + + +/****************************************************************************** + * + * EEPROM related functions + * + ******************************************************************************/ + +/* + * Clear the OWNER_MSK, to establish driver (instead of uCode running on + * embedded controller) as EEPROM reader; each read is a series of pulses + * to/from the EEPROM chip, not a single event, so even reads could conflict + * if they weren't arbitrated by some ownership mechanism. Here, the driver + * simply claims ownership, which should be safe when this function is called + * (i.e. before loading uCode!). + */ +static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv) +{ + _iwl_legacy_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); + return 0; +} + + +static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv) +{ + return; +} + + /** + * iwl3945_load_bsm - Load bootstrap instructions + * + * BSM operation: + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down during RFKILL. When powering back + * up after power-saving sleeps (or during initial uCode load), the BSM loads + * the bootstrap program into the on-board processor, and starts it. + * + * The bootstrap program loads (via DMA) instructions and data for a new + * program from host DRAM locations indicated by the host driver in the + * BSM_DRAM_* registers. Once the new program is loaded, it starts + * automatically. + * + * When initializing the NIC, the host driver points the BSM to the + * "initialize" uCode image. This uCode sets up some internal data, then + * notifies host via "initialize alive" that it is complete. + * + * The host then replaces the BSM_DRAM_* pointer values to point to the + * normal runtime uCode instructions and a backup uCode data cache buffer + * (filled initially with starting data values for the on-board processor), + * then triggers the "initialize" uCode to load and launch the runtime uCode, + * which begins normal operation. + * + * When doing a power-save shutdown, runtime uCode saves data SRAM into + * the backup data cache in DRAM before SRAM is powered down. + * + * When powering back up, the BSM loads the bootstrap program. This reloads + * the runtime uCode instructions and the backup data cache into SRAM, + * and re-launches the runtime uCode from where it left off. + */ +static int iwl3945_load_bsm(struct iwl_priv *priv) +{ + __le32 *image = priv->ucode_boot.v_addr; + u32 len = priv->ucode_boot.len; + dma_addr_t pinst; + dma_addr_t pdata; + u32 inst_len; + u32 data_len; + int rc; + int i; + u32 done; + u32 reg_offset; + + IWL_DEBUG_INFO(priv, "Begin load bsm\n"); + + /* make sure bootstrap program is no larger than BSM's SRAM size */ + if (len > IWL39_MAX_BSM_SIZE) + return -EINVAL; + + /* Tell bootstrap uCode where to find the "Initialize" uCode + * in host DRAM ... host DRAM physical address bits 31:0 for 3945. + * NOTE: iwl3945_initialize_alive_start() will replace these values, + * after the "initialize" uCode has run, to point to + * runtime/protocol instructions and backup data cache. */ + pinst = priv->ucode_init.p_addr; + pdata = priv->ucode_init_data.p_addr; + inst_len = priv->ucode_init.len; + data_len = priv->ucode_init_data.len; + + iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); + iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); + + /* Fill BSM memory with bootstrap instructions */ + for (reg_offset = BSM_SRAM_LOWER_BOUND; + reg_offset < BSM_SRAM_LOWER_BOUND + len; + reg_offset += sizeof(u32), image++) + _iwl_legacy_write_prph(priv, reg_offset, + le32_to_cpu(*image)); + + rc = iwl3945_verify_bsm(priv); + if (rc) + return rc; + + /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ + iwl_legacy_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); + iwl_legacy_write_prph(priv, BSM_WR_MEM_DST_REG, + IWL39_RTC_INST_LOWER_BOUND); + iwl_legacy_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); + + /* Load bootstrap code into instruction SRAM now, + * to prepare to load "initialize" uCode */ + iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG, + BSM_WR_CTRL_REG_BIT_START); + + /* Wait for load of bootstrap uCode to finish */ + for (i = 0; i < 100; i++) { + done = iwl_legacy_read_prph(priv, BSM_WR_CTRL_REG); + if (!(done & BSM_WR_CTRL_REG_BIT_START)) + break; + udelay(10); + } + if (i < 100) + IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i); + else { + IWL_ERR(priv, "BSM write did not complete!\n"); + return -EIO; + } + + /* Enable future boot loads whenever power management unit triggers it + * (e.g. when powering back up after power-save shutdown) */ + iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG, + BSM_WR_CTRL_REG_BIT_START_EN); + + return 0; +} + +static struct iwl_hcmd_ops iwl3945_hcmd = { + .rxon_assoc = iwl3945_send_rxon_assoc, + .commit_rxon = iwl3945_commit_rxon, +}; + +static struct iwl_lib_ops iwl3945_lib = { + .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd, + .txq_free_tfd = iwl3945_hw_txq_free_tfd, + .txq_init = iwl3945_hw_tx_queue_init, + .load_ucode = iwl3945_load_bsm, + .dump_nic_event_log = iwl3945_dump_nic_event_log, + .dump_nic_error_log = iwl3945_dump_nic_error_log, + .apm_ops = { + .init = iwl3945_apm_init, + .config = iwl3945_nic_config, + }, + .eeprom_ops = { + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_REGULATORY_BAND_NO_HT40, + EEPROM_REGULATORY_BAND_NO_HT40, + }, + .acquire_semaphore = iwl3945_eeprom_acquire_semaphore, + .release_semaphore = iwl3945_eeprom_release_semaphore, + }, + .send_tx_power = iwl3945_send_tx_power, + .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr, + + .debugfs_ops = { + .rx_stats_read = iwl3945_ucode_rx_stats_read, + .tx_stats_read = iwl3945_ucode_tx_stats_read, + .general_stats_read = iwl3945_ucode_general_stats_read, + }, +}; + +static const struct iwl_legacy_ops iwl3945_legacy_ops = { + .post_associate = iwl3945_post_associate, + .config_ap = iwl3945_config_ap, + .manage_ibss_station = iwl3945_manage_ibss_station, +}; + +static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = { + .get_hcmd_size = iwl3945_get_hcmd_size, + .build_addsta_hcmd = iwl3945_build_addsta_hcmd, + .request_scan = iwl3945_request_scan, + .post_scan = iwl3945_post_scan, +}; + +static const struct iwl_ops iwl3945_ops = { + .lib = &iwl3945_lib, + .hcmd = &iwl3945_hcmd, + .utils = &iwl3945_hcmd_utils, + .led = &iwl3945_led_ops, + .legacy = &iwl3945_legacy_ops, + .ieee80211_ops = &iwl3945_hw_ops, +}; + +static struct iwl_base_params iwl3945_base_params = { + .eeprom_size = IWL3945_EEPROM_IMG_SIZE, + .num_of_queues = IWL39_NUM_QUEUES, + .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, + .set_l0s = false, + .use_bsm = true, + .led_compensation = 64, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, + .wd_timeout = IWL_DEF_WD_TIMEOUT, + .max_event_log_size = 512, +}; + +static struct iwl_cfg iwl3945_bg_cfg = { + .name = "3945BG", + .fw_name_pre = IWL3945_FW_PRE, + .ucode_api_max = IWL3945_UCODE_API_MAX, + .ucode_api_min = IWL3945_UCODE_API_MIN, + .sku = IWL_SKU_G, + .eeprom_ver = EEPROM_3945_EEPROM_VERSION, + .ops = &iwl3945_ops, + .mod_params = &iwl3945_mod_params, + .base_params = &iwl3945_base_params, + .led_mode = IWL_LED_BLINK, +}; + +static struct iwl_cfg iwl3945_abg_cfg = { + .name = "3945ABG", + .fw_name_pre = IWL3945_FW_PRE, + .ucode_api_max = IWL3945_UCODE_API_MAX, + .ucode_api_min = IWL3945_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G, + .eeprom_ver = EEPROM_3945_EEPROM_VERSION, + .ops = &iwl3945_ops, + .mod_params = &iwl3945_mod_params, + .base_params = &iwl3945_base_params, + .led_mode = IWL_LED_BLINK, +}; + +DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = { + {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)}, + {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)}, + {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)}, + {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)}, + {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)}, + {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids); |