diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-config.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-config.h | 437 |
1 files changed, 0 insertions, 437 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h deleted file mode 100644 index 910970858f98..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ /dev/null @@ -1,437 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __IWL_CONFIG_H__ -#define __IWL_CONFIG_H__ - -#include <linux/types.h> -#include <net/mac80211.h> - - -enum iwl_device_family { - IWL_DEVICE_FAMILY_UNDEFINED, - IWL_DEVICE_FAMILY_1000, - IWL_DEVICE_FAMILY_100, - IWL_DEVICE_FAMILY_2000, - IWL_DEVICE_FAMILY_2030, - IWL_DEVICE_FAMILY_105, - IWL_DEVICE_FAMILY_135, - IWL_DEVICE_FAMILY_5000, - IWL_DEVICE_FAMILY_5150, - IWL_DEVICE_FAMILY_6000, - IWL_DEVICE_FAMILY_6000i, - IWL_DEVICE_FAMILY_6005, - IWL_DEVICE_FAMILY_6030, - IWL_DEVICE_FAMILY_6050, - IWL_DEVICE_FAMILY_6150, - IWL_DEVICE_FAMILY_7000, - IWL_DEVICE_FAMILY_8000, -}; - -static inline bool iwl_has_secure_boot(u32 hw_rev, - enum iwl_device_family family) -{ - /* return 1 only for family 8000 B0 */ - if ((family == IWL_DEVICE_FAMILY_8000) && (hw_rev & 0xC)) - return true; - - return false; -} - -/* - * LED mode - * IWL_LED_DEFAULT: use device default - * IWL_LED_RF_STATE: turn LED on/off based on RF state - * LED ON = RF ON - * LED OFF = RF OFF - * IWL_LED_BLINK: adjust led blink rate based on blink table - * IWL_LED_DISABLE: led disabled - */ -enum iwl_led_mode { - IWL_LED_DEFAULT, - IWL_LED_RF_STATE, - IWL_LED_BLINK, - IWL_LED_DISABLE, -}; - -/* - * This is the threshold value of plcp error rate per 100mSecs. It is - * used to set and check for the validity of plcp_delta. - */ -#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1 -#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50 -#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100 -#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200 -#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255 -#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0 - -/* TX queue watchdog timeouts in mSecs */ -#define IWL_WATCHDOG_DISABLED 0 -#define IWL_DEF_WD_TIMEOUT 2500 -#define IWL_LONG_WD_TIMEOUT 10000 -#define IWL_MAX_WD_TIMEOUT 120000 - -#define IWL_DEFAULT_MAX_TX_POWER 22 - -/* Antenna presence definitions */ -#define ANT_NONE 0x0 -#define ANT_A BIT(0) -#define ANT_B BIT(1) -#define ANT_C BIT(2) -#define ANT_AB (ANT_A | ANT_B) -#define ANT_AC (ANT_A | ANT_C) -#define ANT_BC (ANT_B | ANT_C) -#define ANT_ABC (ANT_A | ANT_B | ANT_C) - -static inline u8 num_of_ant(u8 mask) -{ - return !!((mask) & ANT_A) + - !!((mask) & ANT_B) + - !!((mask) & ANT_C); -} - -/* - * @max_ll_items: max number of OTP blocks - * @shadow_ram_support: shadow support for OTP memory - * @led_compensation: compensate on the led on/off time per HW according - * to the deviation to achieve the desired led frequency. - * The detail algorithm is described in iwl-led.c - * @wd_timeout: TX queues watchdog timeout - * @max_event_log_size: size of event log buffer size for ucode event logging - * @shadow_reg_enable: HW shadow register support - * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command - * is in flight. This is due to a HW bug in 7260, 3160 and 7265. - * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. - */ -struct iwl_base_params { - int eeprom_size; - int num_of_queues; /* def: HW dependent */ - /* for iwl_pcie_apm_init() */ - u32 pll_cfg_val; - - const u16 max_ll_items; - const bool shadow_ram_support; - u16 led_compensation; - unsigned int wd_timeout; - u32 max_event_log_size; - const bool shadow_reg_enable; - const bool pcie_l1_allowed; - const bool apmg_wake_up_wa; - const bool scd_chain_ext_wa; -}; - -/* - * @stbc: support Tx STBC and 1*SS Rx STBC - * @ldpc: support Tx/Rx with LDPC - * @use_rts_for_aggregation: use rts/cts protection for HT traffic - * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40 - */ -struct iwl_ht_params { - enum ieee80211_smps_mode smps_mode; - const bool ht_greenfield_support; /* if used set to true */ - const bool stbc; - const bool ldpc; - bool use_rts_for_aggregation; - u8 ht40_bands; -}; - -/* - * Tx-backoff threshold - * @temperature: The threshold in Celsius - * @backoff: The tx-backoff in uSec - */ -struct iwl_tt_tx_backoff { - s32 temperature; - u32 backoff; -}; - -#define TT_TX_BACKOFF_SIZE 6 - -/** - * struct iwl_tt_params - thermal throttling parameters - * @ct_kill_entry: CT Kill entry threshold - * @ct_kill_exit: CT Kill exit threshold - * @ct_kill_duration: The time intervals (in uSec) in which the driver needs - * to checks whether to exit CT Kill. - * @dynamic_smps_entry: Dynamic SMPS entry threshold - * @dynamic_smps_exit: Dynamic SMPS exit threshold - * @tx_protection_entry: TX protection entry threshold - * @tx_protection_exit: TX protection exit threshold - * @tx_backoff: Array of thresholds for tx-backoff , in ascending order. - * @support_ct_kill: Support CT Kill? - * @support_dynamic_smps: Support dynamic SMPS? - * @support_tx_protection: Support tx protection? - * @support_tx_backoff: Support tx-backoff? - */ -struct iwl_tt_params { - u32 ct_kill_entry; - u32 ct_kill_exit; - u32 ct_kill_duration; - u32 dynamic_smps_entry; - u32 dynamic_smps_exit; - u32 tx_protection_entry; - u32 tx_protection_exit; - struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE]; - bool support_ct_kill; - bool support_dynamic_smps; - bool support_tx_protection; - bool support_tx_backoff; -}; - -/* - * information on how to parse the EEPROM - */ -#define EEPROM_REG_BAND_1_CHANNELS 0x08 -#define EEPROM_REG_BAND_2_CHANNELS 0x26 -#define EEPROM_REG_BAND_3_CHANNELS 0x42 -#define EEPROM_REG_BAND_4_CHANNELS 0x5C -#define EEPROM_REG_BAND_5_CHANNELS 0x74 -#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82 -#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92 -#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80 -#define EEPROM_REGULATORY_BAND_NO_HT40 0 - -/* lower blocks contain EEPROM image and calibration data */ -#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ -#define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */ -#define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */ - -struct iwl_eeprom_params { - const u8 regulatory_bands[7]; - bool enhanced_txpower; -}; - -/* Tx-backoff power threshold - * @pwr: The power limit in mw - * @backoff: The tx-backoff in uSec - */ -struct iwl_pwr_tx_backoff { - u32 pwr; - u32 backoff; -}; - -/** - * struct iwl_cfg - * @name: Official name of the device - * @fw_name_pre: Firmware filename prefix. The api version and extension - * (.ucode) will be added to filename before loading from disk. The - * filename is constructed as fw_name_pre<api>.ucode. - * @ucode_api_max: Highest version of uCode API supported by driver. - * @ucode_api_ok: oldest version of the uCode API that is OK to load - * without a warning, for use in transitions - * @ucode_api_min: Lowest version of uCode API supported by driver. - * @max_inst_size: The maximal length of the fw inst section - * @max_data_size: The maximal length of the fw data section - * @valid_tx_ant: valid transmit antenna - * @valid_rx_ant: valid receive antenna - * @non_shared_ant: the antenna that is for WiFi only - * @nvm_ver: NVM version - * @nvm_calib_ver: NVM calibration version - * @lib: pointer to the lib ops - * @base_params: pointer to basic parameters - * @ht_params: point to ht parameters - * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) - * @rx_with_siso_diversity: 1x1 device with rx antenna diversity - * @internal_wimax_coex: internal wifi/wimax combo device - * @high_temp: Is this NIC is designated to be in high temperature. - * @host_interrupt_operation_mode: device needs host interrupt operation - * mode set - * @d0i3: device uses d0i3 instead of d3 - * @nvm_hw_section_num: the ID of the HW NVM section - * @features: hw features, any combination of feature_whitelist - * @pwr_tx_backoffs: translation table between power limits and backoffs - * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response - * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response - * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the - * station can receive in HT - * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the - * station can receive in VHT - * @dccm_offset: offset from which DCCM begins - * @dccm_len: length of DCCM (including runtime stack CCM) - * @dccm2_offset: offset from which the second DCCM begins - * @dccm2_len: length of the second DCCM - * @smem_offset: offset from which the SMEM begins - * @smem_len: the length of SMEM - * - * We enable the driver to be backward compatible wrt. hardware features. - * API differences in uCode shouldn't be handled here but through TLVs - * and/or the uCode API version instead. - */ -struct iwl_cfg { - /* params specific to an individual device within a device family */ - const char *name; - const char *fw_name_pre; - const unsigned int ucode_api_max; - const unsigned int ucode_api_ok; - const unsigned int ucode_api_min; - const enum iwl_device_family device_family; - const u32 max_data_size; - const u32 max_inst_size; - u8 valid_tx_ant; - u8 valid_rx_ant; - u8 non_shared_ant; - bool bt_shared_single_ant; - u16 nvm_ver; - u16 nvm_calib_ver; - /* params not likely to change within a device family */ - const struct iwl_base_params *base_params; - /* params likely to change within a device family */ - const struct iwl_ht_params *ht_params; - const struct iwl_eeprom_params *eeprom_params; - enum iwl_led_mode led_mode; - const bool rx_with_siso_diversity; - const bool internal_wimax_coex; - const bool host_interrupt_operation_mode; - bool high_temp; - bool d0i3; - u8 nvm_hw_section_num; - bool lp_xtal_workaround; - const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; - bool no_power_up_nic_in_init; - const char *default_nvm_file_B_step; - const char *default_nvm_file_C_step; - netdev_features_t features; - unsigned int max_rx_agg_size; - bool disable_dummy_notification; - unsigned int max_tx_agg_size; - unsigned int max_ht_ampdu_exponent; - unsigned int max_vht_ampdu_exponent; - const u32 dccm_offset; - const u32 dccm_len; - const u32 dccm2_offset; - const u32 dccm2_len; - const u32 smem_offset; - const u32 smem_len; - const struct iwl_tt_params *thermal_params; - bool apmg_not_supported; -}; - -/* - * This list declares the config structures for all devices. - */ -#if IS_ENABLED(CONFIG_IWLDVM) -extern const struct iwl_cfg iwl5300_agn_cfg; -extern const struct iwl_cfg iwl5100_agn_cfg; -extern const struct iwl_cfg iwl5350_agn_cfg; -extern const struct iwl_cfg iwl5100_bgn_cfg; -extern const struct iwl_cfg iwl5100_abg_cfg; -extern const struct iwl_cfg iwl5150_agn_cfg; -extern const struct iwl_cfg iwl5150_abg_cfg; -extern const struct iwl_cfg iwl6005_2agn_cfg; -extern const struct iwl_cfg iwl6005_2abg_cfg; -extern const struct iwl_cfg iwl6005_2bg_cfg; -extern const struct iwl_cfg iwl6005_2agn_sff_cfg; -extern const struct iwl_cfg iwl6005_2agn_d_cfg; -extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; -extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; -extern const struct iwl_cfg iwl1030_bgn_cfg; -extern const struct iwl_cfg iwl1030_bg_cfg; -extern const struct iwl_cfg iwl6030_2agn_cfg; -extern const struct iwl_cfg iwl6030_2abg_cfg; -extern const struct iwl_cfg iwl6030_2bgn_cfg; -extern const struct iwl_cfg iwl6030_2bg_cfg; -extern const struct iwl_cfg iwl6000i_2agn_cfg; -extern const struct iwl_cfg iwl6000i_2abg_cfg; -extern const struct iwl_cfg iwl6000i_2bg_cfg; -extern const struct iwl_cfg iwl6000_3agn_cfg; -extern const struct iwl_cfg iwl6050_2agn_cfg; -extern const struct iwl_cfg iwl6050_2abg_cfg; -extern const struct iwl_cfg iwl6150_bgn_cfg; -extern const struct iwl_cfg iwl6150_bg_cfg; -extern const struct iwl_cfg iwl1000_bgn_cfg; -extern const struct iwl_cfg iwl1000_bg_cfg; -extern const struct iwl_cfg iwl100_bgn_cfg; -extern const struct iwl_cfg iwl100_bg_cfg; -extern const struct iwl_cfg iwl130_bgn_cfg; -extern const struct iwl_cfg iwl130_bg_cfg; -extern const struct iwl_cfg iwl2000_2bgn_cfg; -extern const struct iwl_cfg iwl2000_2bgn_d_cfg; -extern const struct iwl_cfg iwl2030_2bgn_cfg; -extern const struct iwl_cfg iwl6035_2agn_cfg; -extern const struct iwl_cfg iwl6035_2agn_sff_cfg; -extern const struct iwl_cfg iwl105_bgn_cfg; -extern const struct iwl_cfg iwl105_bgn_d_cfg; -extern const struct iwl_cfg iwl135_bgn_cfg; -#endif /* CONFIG_IWLDVM */ -#if IS_ENABLED(CONFIG_IWLMVM) -extern const struct iwl_cfg iwl7260_2ac_cfg; -extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp; -extern const struct iwl_cfg iwl7260_2n_cfg; -extern const struct iwl_cfg iwl7260_n_cfg; -extern const struct iwl_cfg iwl3160_2ac_cfg; -extern const struct iwl_cfg iwl3160_2n_cfg; -extern const struct iwl_cfg iwl3160_n_cfg; -extern const struct iwl_cfg iwl3165_2ac_cfg; -extern const struct iwl_cfg iwl7265_2ac_cfg; -extern const struct iwl_cfg iwl7265_2n_cfg; -extern const struct iwl_cfg iwl7265_n_cfg; -extern const struct iwl_cfg iwl7265d_2ac_cfg; -extern const struct iwl_cfg iwl7265d_2n_cfg; -extern const struct iwl_cfg iwl7265d_n_cfg; -extern const struct iwl_cfg iwl8260_2n_cfg; -extern const struct iwl_cfg iwl8260_2ac_cfg; -extern const struct iwl_cfg iwl4165_2ac_cfg; -extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; -extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; -#endif /* CONFIG_IWLMVM */ - -#endif /* __IWL_CONFIG_H__ */ |