diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-csr.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-csr.h | 43 |
1 files changed, 10 insertions, 33 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index f52bc040bcbf..5ab90ba7a024 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -155,18 +155,10 @@ #define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250) /* Bits for CSR_HW_IF_CONFIG_REG */ -#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) -#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) -#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) -#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400) -#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800) -#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) -#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) - #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ @@ -186,7 +178,7 @@ #define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ #define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ #define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ -#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */ +#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ #define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ #define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ @@ -202,29 +194,17 @@ /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ #define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ #define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ -#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */ #define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ #define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ -#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */ #define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ #define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ -#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ - CSR39_FH_INT_BIT_RX_CHNL2 | \ - CSR_FH_INT_BIT_RX_CHNL1 | \ - CSR_FH_INT_BIT_RX_CHNL0) - - -#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \ - CSR_FH_INT_BIT_TX_CHNL1 | \ - CSR_FH_INT_BIT_TX_CHNL0) - -#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ - CSR_FH_INT_BIT_RX_CHNL1 | \ - CSR_FH_INT_BIT_RX_CHNL0) +#define CSR_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ + CSR_FH_INT_BIT_RX_CHNL1 | \ + CSR_FH_INT_BIT_RX_CHNL0) -#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ - CSR_FH_INT_BIT_TX_CHNL0) +#define CSR_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ + CSR_FH_INT_BIT_TX_CHNL0) /* GPIO */ #define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) @@ -268,7 +248,7 @@ * Indicates MAC (ucode processor, etc.) is powered up and can run. * Internal resources are accessible. * NOTE: This does not indicate that the processor is actually running. - * NOTE: This does not indicate that 4965 or 3945 has completed + * NOTE: This does not indicate that device has completed * init or post-power-down restore of internal SRAM memory. * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that * SRAM is restored and uCode is in normal operation mode. @@ -291,8 +271,6 @@ /* HW REV */ #define CSR_HW_REV_TYPE_MSK (0x00001F0) -#define CSR_HW_REV_TYPE_3945 (0x00000D0) -#define CSR_HW_REV_TYPE_4965 (0x0000000) #define CSR_HW_REV_TYPE_5300 (0x0000020) #define CSR_HW_REV_TYPE_5350 (0x0000030) #define CSR_HW_REV_TYPE_5100 (0x0000050) @@ -363,7 +341,7 @@ * 0: MAC_SLEEP * uCode sets this when preparing a power-saving power-down. * uCode resets this when power-up is complete and SRAM is sane. - * NOTE: 3945/4965 saves internal SRAM data to host when powering down, + * NOTE: device saves internal SRAM data to host when powering down, * and must restore this data after powering back up. * MAC_SLEEP is the best indication that restore is complete. * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and @@ -394,7 +372,6 @@ #define CSR_LED_REG_TRUN_OFF (0x38) /* ANA_PLL */ -#define CSR39_ANA_PLL_CFG_VAL (0x01000000) #define CSR50_ANA_PLL_CFG_VAL (0x00880300) /* HPET MEM debug */ |