diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h new file mode 100644 index 000000000000..aa3474d08231 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h @@ -0,0 +1,312 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_rs_h__ +#define __fw_api_rs_h__ + +#include "fw-api-mac.h" + +/* + * These serve as indexes into + * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1, + IWL_RATE_COUNT, +}; + +#define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX) + +/* fw API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, +}; + +/* + * rate_n_flags bit fields + * + * The 32-bit value has different layouts in the low 8 bites depending on the + * format. There are three formats, HT, VHT and legacy (11abg, with subformats + * for CCK and OFDM). + * + * High-throughput (HT) rate format + * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) + * Very High-throughput (VHT) rate format + * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) + * Legacy OFDM rate format for bits 7:0 + * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) + */ + +/* Bit 8: (1) HT format, (0) legacy or VHT format */ +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS) + +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS 9 +#define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS) + +/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ +#define RATE_MCS_VHT_POS 26 +#define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS) + + +/* + * High-throughput (HT) rate format for bits 7:0 + * + * 2-0: MCS rate base + * 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * 4-3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data + * (bits 7-6 are zero) + * + * Together the low 5 bits work out to the MCS index because we don't + * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two + * streams and 16-23 have three streams. We could also support MCS 32 + * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) + */ +#define RATE_HT_MCS_RATE_CODE_MSK 0x7 + +/* Bit 10: (1) Use Green Field preamble */ +#define RATE_HT_MCS_GF_POS 10 +#define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS) + +#define RATE_HT_MCS_INDEX_MSK 0x3f + +/* + * Very High-throughput (VHT) rate format for bits 7:0 + * + * 3-0: VHT MCS (0-9) + * 5-4: number of streams - 1: + * 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + */ + +/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ +#define RATE_VHT_MCS_RATE_CODE_MSK 0xf +#define RATE_VHT_MCS_NSS_POS 4 +#define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS) + +/* + * Legacy OFDM rate format for bits 7:0 + * + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * (bits 7-4 are 0) + * + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): + * + * 6-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + * (bit 7 is 0) + */ +#define RATE_LEGACY_RATE_MSK 0xff + + +/* + * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz + * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT + */ +#define RATE_MCS_CHAN_WIDTH_POS 11 +#define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS) + +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS 13 +#define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS) + +/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \ + RATE_MCS_ANT_B_MSK) +#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \ + RATE_MCS_ANT_C_MSK) +#define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK +#define RATE_MCS_ANT_NUM 3 + +/* Bit 17-18: (0) SS, (1) SS*2 */ +#define RATE_MCS_STBC_POS 17 +#define RATE_MCS_STBC_MSK (1 << RATE_MCS_STBC_POS) + +/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ +#define RATE_MCS_BF_POS 19 +#define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS) + +/* Bit 20: (0) ZLF is off, (1) ZLF is on */ +#define RATE_MCS_ZLF_POS 20 +#define RATE_MCS_ZLF_MSK (1 << RATE_MCS_ZLF_POS) + +/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ +#define RATE_MCS_DUP_POS 24 +#define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS) + +/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ +#define RATE_MCS_LDPC_POS 27 +#define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS) + + +/* Link Quality definitions */ + +/* # entries in rate scale table to support Tx retries */ +#define LQ_MAX_RETRY_NUM 16 + +/* Link quality command flags, only this one is available */ +#define LQ_FLAG_SET_STA_TLC_RTS_MSK BIT(0) + +/** + * struct iwl_lq_cmd - link quality command + * @sta_id: station to update + * @control: not used + * @flags: combination of LQ_FLAG_* + * @mimo_delim: the first SISO index in rs_table, which separates MIMO + * and SISO rates + * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). + * Should be ANT_[ABC] + * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC] + * @initial_rate_index: first index from rs_table per AC category + * @agg_time_limit: aggregation max time threshold in usec/100, meaning + * value of 100 is one usec. Range is 100 to 8000 + * @agg_disable_start_th: try-count threshold for starting aggregation. + * If a frame has higher try-count, it should not be selected for + * starting an aggregation sequence. + * @agg_frame_cnt_limit: max frame count in an aggregation. + * 0: no limit + * 1: no aggregation (one frame per aggregation) + * 2 - 0x3f: maximal number of frames (up to 3f == 63) + * @rs_table: array of rates for each TX try, each is rate_n_flags, + * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP + * @bf_params: beam forming params, currently not used + */ +struct iwl_lq_cmd { + u8 sta_id; + u8 reserved1; + u16 control; + /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ + u8 flags; + u8 mimo_delim; + u8 single_stream_ant_msk; + u8 dual_stream_ant_msk; + u8 initial_rate_index[AC_NUM]; + /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ + __le16 agg_time_limit; + u8 agg_disable_start_th; + u8 agg_frame_cnt_limit; + __le32 reserved2; + __le32 rs_table[LQ_MAX_RETRY_NUM]; + __le32 bf_params; +}; /* LINK_QUALITY_CMD_API_S_VER_1 */ +#endif /* __fw_api_rs_h__ */ |