diff options
Diffstat (limited to 'drivers/net/wireless/prism54/islpci_hotplug.c')
| -rw-r--r-- | drivers/net/wireless/prism54/islpci_hotplug.c | 43 |
1 files changed, 27 insertions, 16 deletions
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index f692dccf0d07..58257b40c043 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> * @@ -40,8 +39,8 @@ static int init_pcitm = 0; module_param(init_pcitm, int, 0); /* In this order: vendor, device, subvendor, subdevice, class, class_mask, - * driver_data - * If you have an update for this please contact prism54-devel@prism54.org + * driver_data + * If you have an update for this please contact prism54-devel@prism54.org * The latest list can be found at http://prism54.org/supported_cards.php */ static const struct pci_device_id prism54_id_tbl[] = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ @@ -132,15 +131,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) - * The RETRY_TIMEOUT is used to set the number of retries that the core, as a - * Master, will perform before abandoning a cycle. The default value for - * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new - * devices. A write of zero to the RETRY_TIMEOUT register disables this - * function to allow use with any non-compliant legacy devices that may - * execute more retries. + * The RETRY_TIMEOUT is used to set the number of retries that the core, as a + * Master, will perform before abandoning a cycle. The default value for + * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new + * devices. A write of zero to the RETRY_TIMEOUT register disables this + * function to allow use with any non-compliant legacy devices that may + * execute more retries. * - * Writing zero to both these two registers will disable both timeouts and - * *can* solve problems caused by devices that are slow to respond. + * Writing zero to both these two registers will disable both timeouts and + * *can* solve problems caused by devices that are slow to respond. * Make this configurable - MSW */ if ( init_pcitm >= 0 ) { @@ -171,14 +170,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); /* enable MWI */ - pci_set_mwi(pdev); + if (!pci_set_mwi(pdev)) + printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME); /* setup the network device interface and its structure */ if (!(ndev = islpci_setup(pdev))) { /* error configuring the driver as a network device */ printk(KERN_ERR "%s: could not configure network device\n", DRV_NAME); - goto do_pci_release_regions; + goto do_pci_clear_mwi; } priv = netdev_priv(ndev); @@ -208,6 +208,8 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, NULL); free_netdev(ndev); priv = NULL; + do_pci_clear_mwi: + pci_clear_mwi(pdev); do_pci_release_regions: pci_release_regions(pdev); do_pci_disable_device: @@ -241,7 +243,7 @@ prism54_remove(struct pci_dev *pdev) isl38xx_disable_interrupts(priv->device_base); islpci_set_state(priv, PRV_STATE_OFF); /* This bellow causes a lockup at rmmod time. It might be - * because some interrupts still linger after rmmod time, + * because some interrupts still linger after rmmod time, * see bug #17 */ /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ } @@ -255,6 +257,8 @@ prism54_remove(struct pci_dev *pdev) free_netdev(ndev); priv = NULL; + pci_clear_mwi(pdev); + pci_release_regions(pdev); pci_disable_device(pdev); @@ -288,12 +292,19 @@ prism54_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; - BUG_ON(!priv); + int err; - pci_enable_device(pdev); + BUG_ON(!priv); printk(KERN_NOTICE "%s: got resume request\n", ndev->name); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + ndev->name); + return err; + } + pci_restore_state(pdev); /* alright let's go into the PREBOOT state */ |