summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2500usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c77
1 files changed, 52 insertions, 25 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb210747..d3bf7bba611a 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -288,7 +288,7 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -333,7 +333,7 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt2500usb_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
@@ -384,7 +384,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
- 2 * (conf->type != IEEE80211_IF_TYPE_STA));
+ 2 * (conf->type != NL80211_IFTYPE_STATION));
rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
/*
@@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
rt2x00dev->link.vgc_level = value;
}
+/*
+ * NOTE: This function is directly ported from legacy driver, but
+ * despite it being declared it was never called. Although link tuning
+ * sounds like a good idea, and usually works well for the other drivers,
+ * it does _not_ work with rt2500usb. Enabling this function will result
+ * in TX capabilities only until association kicks in. Immediately
+ * after the successful association all TX frames will be kept in the
+ * hardware queue and never transmitted.
+ */
+#if 0
static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
{
int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
@@ -752,6 +762,9 @@ dynamic_cca_tune:
rt2x00dev->link.vgc_level = r17;
}
}
+#else
+#define rt2500usb_link_tuner NULL
+#endif
/*
* Initialization functions.
@@ -1101,8 +1114,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
- skb->len - skbdesc->desc_len);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
@@ -1255,6 +1267,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
@@ -1272,7 +1286,7 @@ static void rt2500usb_beacondone(struct urb *urb)
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
- if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
return;
/*
@@ -1364,6 +1378,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
+ } else {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
@@ -1372,9 +1389,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
- } else {
- rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
- rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
@@ -1459,14 +1473,14 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led mode, for correct led behaviour.
*/
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY)
rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Check if the BBP tuning should be disabled.
@@ -1640,17 +1654,17 @@ static const struct rf_channel rf_vals_5222[] = {
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
* Initialize all hw fields.
*/
rt2x00dev->hw->flags =
- IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
@@ -1663,20 +1677,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1698,6 +1702,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1718,7 +1742,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500usb_probe_hw_mode(rt2x00dev);
+ retval = rt2500usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue
@@ -1726,6 +1752,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
/*
* Set the rssi offset.
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-18 07:46:47 +0000