diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00usb.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00usb.h | 161 |
1 files changed, 123 insertions, 38 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index e40df4050cd0..11e55180cbaf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -60,34 +60,47 @@ #define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) #define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) -/* - * USB vendor commands. - */ -#define USB_DEVICE_MODE 0x01 -#define USB_SINGLE_WRITE 0x02 -#define USB_SINGLE_READ 0x03 -#define USB_MULTI_WRITE 0x06 -#define USB_MULTI_READ 0x07 -#define USB_EEPROM_WRITE 0x08 -#define USB_EEPROM_READ 0x09 -#define USB_LED_CONTROL 0x0a /* RT73USB */ -#define USB_RX_CONTROL 0x0c +/** + * enum rt2x00usb_vendor_request: USB vendor commands. + */ +enum rt2x00usb_vendor_request { + USB_DEVICE_MODE = 1, + USB_SINGLE_WRITE = 2, + USB_SINGLE_READ = 3, + USB_MULTI_WRITE = 6, + USB_MULTI_READ = 7, + USB_EEPROM_WRITE = 8, + USB_EEPROM_READ = 9, + USB_LED_CONTROL = 10, /* RT73USB */ + USB_RX_CONTROL = 12, +}; -/* - * Device modes offset +/** + * enum rt2x00usb_mode_offset: Device modes offset. */ -#define USB_MODE_RESET 0x01 -#define USB_MODE_UNPLUG 0x02 -#define USB_MODE_FUNCTION 0x03 -#define USB_MODE_TEST 0x04 -#define USB_MODE_SLEEP 0x07 /* RT73USB */ -#define USB_MODE_FIRMWARE 0x08 /* RT73USB */ -#define USB_MODE_WAKEUP 0x09 /* RT73USB */ +enum rt2x00usb_mode_offset { + USB_MODE_RESET = 1, + USB_MODE_UNPLUG = 2, + USB_MODE_FUNCTION = 3, + USB_MODE_TEST = 4, + USB_MODE_SLEEP = 7, /* RT73USB */ + USB_MODE_FIRMWARE = 8, /* RT73USB */ + USB_MODE_WAKEUP = 9, /* RT73USB */ +}; -/* - * Used to read/write from/to the device. +/** + * rt2x00usb_vendor_request - Send register command to device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @value: Value to write to device + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * * This is the main function to communicate with the device, - * the buffer argument _must_ either be NULL or point to + * the &buffer argument _must_ either be NULL or point to * a buffer allocated by kmalloc. Failure to do so can lead * to unexpected behavior depending on the architecture. */ @@ -97,13 +110,21 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout); -/* - * Used to read/write from/to the device. +/** + * rt2x00usb_vendor_request_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * * This function will use a previously with kmalloc allocated cache * to communicate with the device. The contents of the buffer pointer * will be copied to this cache when writing, or read from the cache * when reading. - * Buffers send to rt2x00usb_vendor_request _must_ be allocated with + * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with * kmalloc. Hence the reason for using a previously allocated cache * which has been allocated properly. */ @@ -112,15 +133,32 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); -/* - * A version of rt2x00usb_vendor_request_buff which must be called - * if the usb_cache_mutex is already held. */ +/** + * rt2x00usb_vendor_request_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * A version of &rt2x00usb_vendor_request_buff which must be called + * if the usb_cache_mutex is already held. + */ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); -/* +/** + * rt2x00usb_vendor_request_sw - Send single register command to device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @offset: Register offset to perform action on + * @value: Value to write to device + * @timeout: Operation timeout + * * Simple wrapper around rt2x00usb_vendor_request to write a single * command to the device. Since we don't use the buffer argument we * don't have to worry about kmalloc here. @@ -136,7 +174,12 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, value, NULL, 0, timeout); } -/* +/** + * rt2x00usb_eeprom_read - Read eeprom from device + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @eeprom: Pointer to eeprom array to store the information in + * @length: Number of bytes to read from the eeprom + * * Simple wrapper around rt2x00usb_vendor_request to read the eeprom * from the device. Note that the eeprom argument _must_ be allocated using * kmalloc for correct handling inside the kernel USB layer. @@ -147,8 +190,8 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, - USB_VENDOR_REQUEST_IN, 0x0000, - 0x0000, eeprom, lenght, timeout); + USB_VENDOR_REQUEST_IN, 0, 0, + eeprom, lenght, timeout); } /* @@ -160,16 +203,58 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); * TX data handlers. */ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control); +/** + * struct queue_entry_priv_usb_rx: Per RX entry USB specific information + * + * @urb: Urb structure used for device communication. + */ +struct queue_entry_priv_usb_rx { + struct urb *urb; +}; + +/** + * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * + * @urb: Urb structure used for device communication. + * @control: mac80211 control structure used to transmit data. + */ +struct queue_entry_priv_usb_tx { + struct urb *urb; + + struct ieee80211_tx_control control; +}; + +/** + * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * + * The first section should match &struct queue_entry_priv_usb_tx exactly. + * rt2500usb can use this structure to send a guardian byte when working + * with beacons. + * + * @urb: Urb structure used for device communication. + * @control: mac80211 control structure used to transmit data. + * @guardian_data: Set to 0, used for sending the guardian data. + * @guardian_urb: Urb structure used to send the guardian data. + */ +struct queue_entry_priv_usb_bcn { + struct urb *urb; + + struct ieee80211_tx_control control; + + unsigned int guardian_data; + struct urb *guardian_urb; +}; + /* * Device initialization handlers. */ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); |