diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h | 415 |
1 files changed, 200 insertions, 215 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h index 32e135ab9a63..79103347d967 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h @@ -11,10 +11,6 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * @@ -30,297 +26,286 @@ #ifndef __RTL8723E_PWRSEQ_H__ #define __RTL8723E_PWRSEQ_H__ -/* - Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd - There are 6 HW Power States: - 0: POFF--Power Off - 1: PDN--Power Down - 2: CARDEMU--Card Emulation - 3: ACT--Active Mode - 4: LPS--Low Power State - 5: SUS--Suspend - - The transision from different states are defined below - TRANS_CARDEMU_TO_ACT - TRANS_ACT_TO_CARDEMU - TRANS_CARDEMU_TO_SUS - TRANS_SUS_TO_CARDEMU - TRANS_CARDEMU_TO_PDN - TRANS_ACT_TO_LPS - TRANS_LPS_TO_ACT - - TRANS_END - PWR SEQ Version: rtl8188e_PwrSeq_V09.h -*/ - -#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10 -#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10 -#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10 -#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10 -#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10 -#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10 -#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15 -#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15 -#define RTL8188E_TRANS_END_STEPS 1 +#include "pwrseqcmd.h" +/* Check document WM-20110607-Paul-RTL8188EE_Power_Architecture-R02.vsd + * There are 6 HW Power States: + * 0: POFF--Power Off + * 1: PDN--Power Down + * 2: CARDEMU--Card Emulation + * 3: ACT--Active Mode + * 4: LPS--Low Power State + * 5: SUS--Suspend + * + * The transision from different states are defined below + * TRANS_CARDEMU_TO_ACT + * TRANS_ACT_TO_CARDEMU + * TRANS_CARDEMU_TO_SUS + * TRANS_SUS_TO_CARDEMU + * TRANS_CARDEMU_TO_PDN + * TRANS_ACT_TO_LPS + * TRANS_LPS_TO_ACT + * + * TRANS_END + * PWR SEQ Version: rtl8188ee_PwrSeq_V09.h + */ +#define RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS 10 +#define RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS 10 +#define RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS 10 +#define RTL8188EE_TRANS_SUS_TO_CARDEMU_STEPS 10 +#define RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS 10 +#define RTL8188EE_TRANS_PDN_TO_CARDEMU_STEPS 10 +#define RTL8188EE_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8188EE_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8188EE_TRANS_END_STEPS 1 -#define RTL8188E_TRANS_CARDEMU_TO_ACT \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ +/* The following macros have the following format: + * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value + * comments }, + */ +#define RTL8188EE_TRANS_CARDEMU_TO_ACT \ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /* wait till 0x04[17] = 1 power ready*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1) \ + /* wait till 0x04[17] = 1 power ready*/}, \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /* 0x02[1:0] = 0 reset BB*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0 \ + /* 0x02[1:0] = 0 reset BB*/}, \ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x24[23] = 2b'01 schmit trigger */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \ + /*0x24[23] = 2b'01 schmit trigger */}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0 \ + /* 0x04[15] = 0 disable HWPDN (control by DRV)*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x04[12:11] = 2b'00 disable WL suspend*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0 \ + /*0x04[12:11] = 2b'00 disable WL suspend*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x04[8] = 1 polling until return 0*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0) \ + /*0x04[8] = 1 polling until return 0*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*wait till 0x04[8] = 0*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0 \ + /*wait till 0x04[8] = 0*/}, \ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \ + /*LDO normal mode*/}, \ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \ + /*SDIO Driving*/}, -#define RTL8188E_TRANS_ACT_TO_CARDEMU \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ +#define RTL8188EE_TRANS_ACT_TO_CARDEMU \ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \ + /*0x1F[7:0] = 0 turn off RF*/}, \ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \ + /*LDO Sleep mode*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x04[9] = 1 turn off MAC by HW state machine*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1) \ + /*0x04[9] = 1 turn off MAC by HW state machine*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0 \ + /*wait till 0x04[9] = 0 polling until return 0 to disable*/}, - -#define RTL8188E_TRANS_CARDEMU_TO_SUS \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ +#define RTL8188EE_TRANS_CARDEMU_TO_SUS \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /*0x04[12:11] = 2b'01enable WL suspend*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3) \ + /*0x04[12:11] = 2b'01enable WL suspend*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ - /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4) \ + /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/}, \ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7) \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */}, \ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /*Set USB suspend enable local register 0xfe10[4]= 1 */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \ + /*Set USB suspend enable local register 0xfe10[4]=1 */}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - /*Set SDIO suspend local register*/ \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0) \ + /*Set SDIO suspend local register*/}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - /*wait power state to suspend*/ \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \ + /*wait power state to suspend*/}, -#define RTL8188E_TRANS_SUS_TO_CARDEMU \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_SUS_TO_CARDEMU \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - /*Set SDIO suspend local register*/ \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \ + /*Set SDIO suspend local register*/}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - /*wait power state to suspend*/ \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1) \ + /*wait power state to suspend*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x04[12:11] = 2b'01enable WL suspend*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0 \ + /*0x04[12:11] = 2b'01enable WL suspend*/}, -#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_CARDEMU_TO_CARDDIS \ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*0x24[23] = 2b'01 schmit trigger */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \ + /*0x24[23] = 2b'01 schmit trigger */}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /*0x04[12:11] = 2b'01 enable WL suspend*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) \ + /*0x04[12:11] = 2b'01 enable WL suspend*/}, \ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ - /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */}, \ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ - /*Set USB suspend enable local register 0xfe10[4]= 1 */ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \ + /*Set USB suspend enable local register 0xfe10[4]=1 */}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - /*Set SDIO suspend local register*/ \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0) \ + /*Set SDIO suspend local register*/}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \ + /*wait power state to suspend*/}, -#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_CARDDIS_TO_CARDEMU \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO,\ - PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \ + /*Set SDIO suspend local register*/}, \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO,\ - PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1) \ + /*wait power state to suspend*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \ - /*0x04[12:11] = 2b'01enable WL suspend*/ - + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0 \ + /*0x04[12:11] = 2b'01enable WL suspend*/}, -#define RTL8188E_TRANS_CARDEMU_TO_PDN \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_CARDEMU_TO_PDN \ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0/* 0x04[16] = 0*/}, \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/ - + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \ + /* 0x04[15] = 1*/}, -#define RTL8188E_TRANS_PDN_TO_CARDEMU \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_PDN_TO_CARDEMU \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0/* 0x04[15] = 0*/}, - -#define RTL8188E_TRANS_ACT_TO_LPS \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ +#define RTL8188EE_TRANS_ACT_TO_LPS \ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F \ + /*Tx Pause*/}, \ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*zero if no pkt is tx*/\ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \ + /*Should be zero if no packet is transmitting*/}, \ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*Should be zero if no packet is transmitting*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \ + /*Should be zero if no packet is transmitting*/}, \ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*Should be zero if no packet is transmitting*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \ + /*Should be zero if no packet is transmitting*/}, \ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*Should be zero if no packet is transmitting*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \ + /*Should be zero if no packet is transmitting*/}, \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*CCK and OFDM are disabled, and clock are gated*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0 \ + /*CCK and OFDM are disabled,and clock are gated*/}, \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \ + /*Delay 1us*/}, \ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F \ + /*Reset MAC TRX*/}, \ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*check if removed later*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0 \ + /*check if removed later*/}, \ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*Respond TxOK to scheduler*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5) \ + /*Respond TxOK to scheduler*/}, -#define RTL8188E_TRANS_LPS_TO_ACT \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ +#define RTL8188EE_TRANS_LPS_TO_ACT \ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \ + /*SDIO RPWM*/}, \ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \ + /*USB RPWM*/}, \ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \ + /*PCIe RPWM*/}, \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \ + /*Delay*/}, \ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*. 0x08[4] = 0 switch TSF to 40M*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \ + /*. 0x08[4] = 0 switch TSF to 40M*/}, \ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*Polling 0x109[7]= 0 TSF in 40M*/ \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0 \ + /*Polling 0x109[7]=0 TSF in 40M*/}, \ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*. 0x29[7:6] = 2b'00 enable BB clock*/ \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0 \ + /*. 0x29[7:6] = 2b'00 enable BB clock*/}, \ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*. 0x101[1] = 1*/\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1) \ + /*. 0x101[1] = 1*/}, \ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \ + /*. 0x100[7:0] = 0xFF enable WMAC TRX*/}, \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - /*. 0x02[1:0] = 2b'11 enable BB macro*/\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)}, \ - {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ - + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0) \ + /*. 0x02[1:0] = 2b'11 enable BB macro*/}, \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \ + /*. 0x522 = 0*/}, -#define RTL8188E_TRANS_END \ - /* format */ \ - /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ +#define RTL8188EE_TRANS_END \ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ 0, PWR_CMD_END, 0, 0} -extern struct wlan_pwr_cfg rtl8188e_power_on_flow - [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_radio_off_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_card_disable_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_card_enable_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_suspend_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_resume_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow - [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + - RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow - [RTL8188E_TRANS_ACT_TO_LPS_STEPS + - RTL8188E_TRANS_END_STEPS]; -extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow - [RTL8188E_TRANS_LPS_TO_ACT_STEPS + - RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_power_on_flow + [RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_radio_off_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_card_disable_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_card_enable_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_suspend_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_resume_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_hwpdn_flow + [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_enter_lps_flow + [RTL8188EE_TRANS_ACT_TO_LPS_STEPS + + RTL8188EE_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188ee_leave_lps_flow + [RTL8188EE_TRANS_LPS_TO_ACT_STEPS + + RTL8188EE_TRANS_END_STEPS]; /* RTL8723 Power Configuration CMDs for PCIe interface */ -#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188e_power_on_flow -#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188e_radio_off_flow -#define Rtl8188E_NIC_DISABLE_FLOW rtl8188e_card_disable_flow -#define Rtl8188E_NIC_ENABLE_FLOW rtl8188e_card_enable_flow -#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188e_suspend_flow -#define Rtl8188E_NIC_RESUME_FLOW rtl8188e_resume_flow -#define Rtl8188E_NIC_PDN_FLOW rtl8188e_hwpdn_flow -#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188e_enter_lps_flow -#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188e_leave_lps_flow +#define RTL8188EE_NIC_PWR_ON_FLOW rtl8188ee_power_on_flow +#define RTL8188EE_NIC_RF_OFF_FLOW rtl8188ee_radio_off_flow +#define RTL8188EE_NIC_DISABLE_FLOW rtl8188ee_card_disable_flow +#define RTL8188EE_NIC_ENABLE_FLOW rtl8188ee_card_enable_flow +#define RTL8188EE_NIC_SUSPEND_FLOW rtl8188ee_suspend_flow +#define RTL8188EE_NIC_RESUME_FLOW rtl8188ee_resume_flow +#define RTL8188EE_NIC_PDN_FLOW rtl8188ee_hwpdn_flow +#define RTL8188EE_NIC_LPS_ENTER_FLOW rtl8188ee_enter_lps_flow +#define RTL8188EE_NIC_LPS_LEAVE_FLOW rtl8188ee_leave_lps_flow #endif |