summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/tg3.c52
-rw-r--r--drivers/net/tg3.h1
2 files changed, 44 insertions, 9 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b8f1524da557..caf4102b54ce 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
}
}
- /* Find msi capability. */
+ /* The EPB bridge inside 5714, 5715, and 5780 cannot support
+ * DMA addresses > 40-bit. This bridge may have other additional
+ * 57xx devices behind it in some 4-port NIC designs for example.
+ * Any tg3 device found behind the bridge will also need the 40-bit
+ * DMA workaround.
+ */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
}
+ else {
+ struct pci_dev *bridge = NULL;
+
+ do {
+ bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_EPB,
+ bridge);
+ if (bridge && bridge->subordinate &&
+ (bridge->subordinate->number <=
+ tp->pdev->bus->number) &&
+ (bridge->subordinate->subordinate >=
+ tp->pdev->bus->number)) {
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ pci_dev_put(bridge);
+ break;
+ }
+ } while (bridge);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
- if (ccval == 0x6 || ccval == 0x7)
+ /* If the 5704 is behind the EPB bridge, we can
+ * do the less restrictive ONE_DMA workaround for
+ * better performance.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+ tp->dma_rwctrl |= 0x8000;
+ else if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
/* Set bit 23 to enable PCIX hw bug fix */
@@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_iounmap;
}
- /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+ /* The EPB bridge inside 5714, 5715, and 5780 and any
+ * device behind the EPB cannot support DMA addresses > 40-bit.
* On 64-bit systems with IOMMU, use 40-bit dma_mask.
* On 64-bit systems without IOMMU, use 64-bit dma_mask and
* do DMA address check in tg3_start_xmit().
*/
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+ if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+ else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
persist_dma_mask = dma_mask = DMA_40BIT_MASK;
#ifdef CONFIG_HIGHMEM
dma_mask = DMA_64BIT_MASK;
#endif
- } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
- persist_dma_mask = dma_mask = DMA_32BIT_MASK;
- else
+ } else
persist_dma_mask = dma_mask = DMA_64BIT_MASK;
/* Configure DMA attributes. */
@@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
- dev->name, tp->dma_rwctrl);
+ printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ dev->name, tp->dma_rwctrl,
+ (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+ (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
return 0;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 7f4b7f6ac40d..7e3b613afb29 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2163,6 +2163,7 @@ struct tg3 {
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_IN_RESET_TASK 0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
#define TG3_FLAG_SPLIT_MODE 0x40000000