summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bnx2x_link.c2
-rw-r--r--drivers/net/e1000/e1000_hw.c4
-rw-r--r--drivers/net/slip.h2
-rw-r--r--drivers/net/tehuti.c4
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/wireless/atmel.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c4
-rw-r--r--drivers/net/wireless/strip.c2
9 files changed, 13 insertions, 13 deletions
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 67de94f1f30e..fefa6ab13064 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
u8 shift = 8*4;
u8 digit;
if (len < 10) {
- /* Need more then 10chars for this format */
+ /* Need more than 10chars for this format */
*str_ptr = '\0';
return -EINVAL;
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d04eef53571e..e1a3fc1303ee 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
* Phy Status register. For IGP phy's, this bit is valid only if link speed is
* 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
* return 0. If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
diff --git a/drivers/net/slip.h b/drivers/net/slip.h
index 853e0f6ec710..9ea5c11287d2 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */
#ifdef SL_INCLUDE_CSLIP
unsigned long tx_compressed;
unsigned long rx_compressed;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a10a83a11d9f..a7a4dc4d6313 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
* skb for rx. It assumes that Rx is desabled in HW
* funcs are grouped for better cache usage
*
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
* filled and packets will be dropped by nic without getting into host or
* cousing interrupt. Anyway, in that condition, host has no chance to proccess
* all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
*
* Pushes desc to TxD fifo and overlaps it if needed.
* NOTE: this func does not check for available space. this is responsibility
- * of the caller. Neither does it check that data size is smaller then
+ * of the caller. Neither does it check that data size is smaller than
* fifo size.
*/
static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a011666342ff..50eb29ce3c87 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
* will consequently cause a timeout.
*
* NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 350157fcd080..4223672c4432 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3836,7 +3836,7 @@ static int reset_atmel_card(struct net_device *dev)
This routine is also responsible for initialising some
hardware-specific fields in the atmel_private structure,
including a copy of the firmware's hostinfo stucture
- which is the route into the rest of the firmare datastructures. */
+ which is the route into the rest of the firmware datastructures. */
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a7..823c2bf5e31e 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
/* Step 2. Wait for stop Master Assert
- * (not more then 50us, otherwise ret error */
+ * (not more than 50us, otherwise ret error */
i = 5;
do {
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
@@ -1830,7 +1830,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
cancel_delayed_work(&priv->rf_kill);
}
- /* Kill the firmare hang check timer */
+ /* Kill the firmware hang check timer */
if (!priv->stop_hang_check) {
priv->stop_hang_check = 1;
cancel_delayed_work(&priv->hang_check);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64c..aee9cba13eb3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
* Make room for new data, note that we increase both
* headsize and tailsize when required. The tailsize is
* only needed when ICV data needs to be inserted and
- * the padding is smaller then the ICV data.
- * When alignment requirements is greater then the
+ * the padding is smaller than the ICV data.
+ * When alignment requirements is greater than the
* ICV data we must trim the skb to the correct size
* because we need to remove the extra bytes.
*/
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index dd0de3a9ed4e..7015f2480550 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */
unsigned long pps_timer; /* Timer to determine pps */
unsigned long rx_pps_count; /* Counter to determine pps */