diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 6382b7c416f4..e10f5ed26181 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1341,6 +1341,42 @@ static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) spin_unlock(&pdata->mac_lock); } +static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + /* If the internal PHY is in General Power-Down mode, all, except the + * management interface, is powered-down and stays in that condition as + * long as Phy register bit 0.11 is HIGH. + * + * In that case, clear the bit 0.11, so the PHY powers up and we can + * access to the phy registers. + */ + rc = phy_read(pdata->phy_dev, MII_BMCR); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* If the PHY general power-down bit is not set is not necessary to + * disable the general power down-mode. + */ + if (rc & BMCR_PDOWN) { + rc = phy_write(pdata->phy_dev, MII_BMCR, rc & ~BMCR_PDOWN); + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + + usleep_range(1000, 1500); + } + + return 0; +} + static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) { int rc = 0; @@ -1414,6 +1450,16 @@ static int smsc911x_soft_reset(struct smsc911x_data *pdata) int ret; /* + * Make sure to power-up the PHY chip before doing a reset, otherwise + * the reset fails. + */ + ret = smsc911x_phy_general_power_up(pdata); + if (ret) { + SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip"); + return ret; + } + + /* * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that * are initialized in a Energy Detect Power-Down mode that prevents * the MAC chip to be software reseted. So we have to wakeup the PHY |