diff options
Diffstat (limited to 'drivers/net')
69 files changed, 11340 insertions, 2430 deletions
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 30bee11c48bd..d2102a27d307 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -586,16 +586,16 @@ struct rtl8139_private { dma_addr_t tx_bufs_dma; signed char phys[4]; /* MII device addresses. */ char twistie, twist_row, twist_col; /* Twister tune state. */ - unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int default_port : 4; /* Last dev->if_port value. */ + unsigned int have_thread : 1; spinlock_t lock; spinlock_t rx_lock; chip_t chipset; - pid_t thr_pid; - wait_queue_head_t thr_wait; - struct completion thr_exited; u32 rx_config; struct rtl_extra_stats xstats; - int time_to_die; + + struct work_struct thread; + struct mii_if_info mii; unsigned int regs_len; unsigned long fifo_copy_timeout; @@ -620,7 +620,7 @@ static int rtl8139_open (struct net_device *dev); static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, int val); -static void rtl8139_start_thread(struct net_device *dev); +static void rtl8139_start_thread(struct rtl8139_private *tp); static void rtl8139_tx_timeout (struct net_device *dev); static void rtl8139_init_ring (struct net_device *dev); static int rtl8139_start_xmit (struct sk_buff *skb, @@ -637,6 +637,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev); static void rtl8139_set_rx_mode (struct net_device *dev); static void __set_rx_mode (struct net_device *dev); static void rtl8139_hw_start (struct net_device *dev); +static void rtl8139_thread (void *_data); static struct ethtool_ops rtl8139_ethtool_ops; /* write MMIO register, with flush */ @@ -1007,8 +1008,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1)); spin_lock_init (&tp->lock); spin_lock_init (&tp->rx_lock); - init_waitqueue_head (&tp->thr_wait); - init_completion (&tp->thr_exited); + INIT_WORK(&tp->thread, rtl8139_thread, dev); tp->mii.dev = dev; tp->mii.mdio_read = mdio_read; tp->mii.mdio_write = mdio_write; @@ -1345,7 +1345,7 @@ static int rtl8139_open (struct net_device *dev) dev->irq, RTL_R8 (MediaStatus), tp->mii.full_duplex ? "full" : "half"); - rtl8139_start_thread(dev); + rtl8139_start_thread(tp); return 0; } @@ -1594,55 +1594,43 @@ static inline void rtl8139_thread_iter (struct net_device *dev, RTL_R8 (Config1)); } -static int rtl8139_thread (void *data) +static void rtl8139_thread (void *_data) { - struct net_device *dev = data; + struct net_device *dev = _data; struct rtl8139_private *tp = netdev_priv(dev); - unsigned long timeout; - - daemonize("%s", dev->name); - allow_signal(SIGTERM); - - while (1) { - timeout = next_tick; - do { - timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); - /* make swsusp happy with our thread */ - try_to_freeze(); - } while (!signal_pending (current) && (timeout > 0)); - - if (signal_pending (current)) { - flush_signals(current); - } + unsigned long thr_delay; - if (tp->time_to_die) - break; - - if (rtnl_lock_interruptible ()) - break; + if (rtnl_shlock_nowait() == 0) { rtl8139_thread_iter (dev, tp, tp->mmio_addr); rtnl_unlock (); + + thr_delay = next_tick; + } else { + /* unlikely race. mitigate with fast poll. */ + thr_delay = HZ / 2; } - complete_and_exit (&tp->thr_exited, 0); + schedule_delayed_work(&tp->thread, thr_delay); } -static void rtl8139_start_thread(struct net_device *dev) +static void rtl8139_start_thread(struct rtl8139_private *tp) { - struct rtl8139_private *tp = netdev_priv(dev); - - tp->thr_pid = -1; tp->twistie = 0; - tp->time_to_die = 0; if (tp->chipset == CH_8139_K) tp->twistie = 1; else if (tp->drv_flags & HAS_LNK_CHNG) return; - tp->thr_pid = kernel_thread(rtl8139_thread, dev, CLONE_FS|CLONE_FILES); - if (tp->thr_pid < 0) { - printk (KERN_WARNING "%s: unable to start kernel thread\n", - dev->name); + tp->have_thread = 1; + + schedule_delayed_work(&tp->thread, next_tick); +} + +static void rtl8139_stop_thread(struct rtl8139_private *tp) +{ + if (tp->have_thread) { + cancel_rearming_delayed_work(&tp->thread); + tp->have_thread = 0; } } @@ -2224,22 +2212,12 @@ static int rtl8139_close (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; - int ret = 0; unsigned long flags; netif_stop_queue (dev); - if (tp->thr_pid >= 0) { - tp->time_to_die = 1; - wmb(); - ret = kill_proc (tp->thr_pid, SIGTERM, 1); - if (ret) { - printk (KERN_ERR "%s: unable to signal thread\n", dev->name); - return ret; - } - wait_for_completion (&tp->thr_exited); - } - + rtl8139_stop_thread(tp); + if (netif_msg_ifdown(tp)) printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n", dev->name, RTL_R16 (IntrStatus)); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ebd7313d7fc1..e2fa29b612cd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1901,6 +1901,8 @@ config E1000_NAPI If in doubt, say N. +source "drivers/net/ixp2000/Kconfig" + config MYRI_SBUS tristate "MyriCOM Gigabit Ethernet support" depends on SBUS @@ -2008,7 +2010,18 @@ config SKGE It does not support the link failover and network management features that "portable" vendor supplied sk98lin driver does. - + + +config SKY2 + tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This driver support the Marvell Yukon 2 Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sky2. This is recommended. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI @@ -2120,7 +2133,7 @@ config BNX2 config SPIDER_NET tristate "Spider Gigabit Ethernet driver" - depends on PCI && PPC_BPA + depends on PCI && PPC_CELL help This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4cffd34442aa..b74a7cb5bae6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -13,7 +13,10 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o -gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o +gianfar_driver-objs := gianfar.o \ + gianfar_ethtool.o \ + gianfar_mii.o \ + gianfar_sysfs.o # # link order important here @@ -59,6 +62,7 @@ spidernet-y += spider_net.o spider_net_ethtool.o sungem_phy.o obj-$(CONFIG_SPIDER_NET) += spidernet.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o +obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o @@ -202,6 +206,7 @@ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ +obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ obj-$(CONFIG_NETCONSOLE) += netconsole.o diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile index cf50384b469e..5cdae2bc055a 100644 --- a/drivers/net/bonding/Makefile +++ b/drivers/net/bonding/Makefile @@ -4,5 +4,5 @@ obj-$(CONFIG_BONDING) += bonding.o -bonding-objs := bond_main.o bond_3ad.o bond_alb.o +bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index d2f34d5a8083..f3f5825469d6 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -18,38 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Amir Noam <amir.noam at intel dot com> - * - Added support for lacp_rate module param. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Based on discussion on mailing list, changed locking scheme - * to use lock/unlock or lock_bh/unlock_bh appropriately instead - * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing - * hidden bugs and solves system hangs that occurred due to the fact - * that holding lock_irqsave doesn't prevent softirqs from running. - * This also increases total throughput since interrupts are not - * blocked on each transmitted packets or monitor timeout. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * - * 2003/05/20 - Amir Noam <amir.noam at intel dot com> - * - Fix long fail over time when releasing last slave of an active - * aggregator - send LACPDU on unbind of slave to tell partner this - * port is no longer aggregatable. - * - * 2003/06/25 - Tsippy Mendelson <tsippy.mendelson at intel dot com> - * - Send LACPDU as highest priority packet to further fix the above - * problem on very high Tx traffic load where packets may get dropped - * by the slave. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes */ //#define BONDING_DEBUG 1 @@ -1198,10 +1166,10 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) // detect loopback situation if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) { // INFO_RECEIVED_LOOPBACK_FRAMES - printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n", - port->slave->dev->name); - printk(KERN_ERR "Check the configuration to verify that all Adapters " - "are connected to 802.3ad compliant switch ports\n"); + printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on " + "adapter (%s). Check the configuration to verify that all " + "Adapters are connected to 802.3ad compliant switch ports\n", + port->slave->dev->master->name, port->slave->dev->name); __release_rx_machine_lock(port); return; } @@ -1378,8 +1346,9 @@ static void ad_port_selection_logic(struct port *port) } } if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list - printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was " + printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was " "related to aggregator %d but was not on its port list\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name, port->aggregator->aggregator_identifier); } @@ -1450,7 +1419,8 @@ static void ad_port_selection_logic(struct port *port) dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); } else { - printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n", + printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name); } } @@ -1582,8 +1552,9 @@ static void ad_agg_selection_logic(struct aggregator *aggregator) // check if any partner replys if (best_aggregator->is_individual) { - printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner " - "for any adapters in the bond\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from " + "the link partner for any adapters in the bond\n", + best_aggregator->slave->dev->master->name); } // check if there are more than one aggregator @@ -1915,7 +1886,8 @@ int bond_3ad_bind_slave(struct slave *slave) struct aggregator *aggregator; if (bond == NULL) { - printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name); + printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n", + slave->dev->master->name, slave->dev->name); return -1; } @@ -1990,7 +1962,9 @@ void bond_3ad_unbind_slave(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to " + "unbind an uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2021,7 +1995,8 @@ void bond_3ad_unbind_slave(struct slave *slave) dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { - printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + aggregator->slave->dev->master->name); // select new active aggregator select_new_active_agg = 1; } @@ -2051,15 +2026,17 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_agg_selection_logic(__get_first_agg(port)); } } else { - printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, " - "and could not find a new aggregator for its ports\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, " + "and could not find a new aggregator for its ports\n", + slave->dev->master->name); } } else { // in case that the only port related to this aggregator is the one we want to remove select_new_active_agg = aggregator->is_active; // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2085,7 +2062,8 @@ void bond_3ad_unbind_slave(struct slave *slave) // clear the aggregator ad_clear_agg(temp_aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2131,7 +2109,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // select the active aggregator for the bond if ((port = __get_first_port(bond))) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is " + "uninitialized\n", bond->dev->name); goto re_arm; } @@ -2143,7 +2122,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // for each port run the state machines for (port = __get_first_port(bond); port; port = __get_next_port(port)) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized " + "port\n", bond->dev->name); goto re_arm; } @@ -2184,7 +2164,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u port = &(SLAVE_AD_INFO(slave).port); if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is " + "uninitialized\n", slave->dev->name, slave->dev->master->name); return; } @@ -2230,8 +2211,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: speed " + "changed for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2257,8 +2239,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed " + "for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2285,8 +2268,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for " + "uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2363,7 +2347,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: " + "bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } @@ -2372,7 +2357,9 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) if (slaves_in_agg == 0) { /*the aggregator is empty*/ - printk(KERN_DEBUG "ERROR: active aggregator is empty\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: active " + "aggregator is empty\n", + dev->name); goto out; } @@ -2390,7 +2377,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (slave_agg_no >= 0) { - printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id); + printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on " + "for aggregator ID %d\n", dev->name, agg_id); goto out; } diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h index 673a30af5660..5ee2cef5b037 100644 --- a/drivers/net/bonding/bond_3ad.h +++ b/drivers/net/bonding/bond_3ad.h @@ -18,19 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Amir Noam <amir.noam at intel dot com> - * - Added support for lacp_rate module param. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes */ #ifndef __BOND_3AD_H__ diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index f8fce3961197..854ddfb90da1 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -18,25 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/06/25 - Shmulik Hen <shmulik.hen at intel dot com> - * - Fixed signed/unsigned calculation errors that caused load sharing - * to collapse to one slave under very heavy UDP Tx stress. - * - * 2003/08/06 - Amir Noam <amir.noam at intel dot com> - * - Add support for setting bond's MAC address with special - * handling required for ALB/TLB. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes - * - * 2003/12/30 - Amir Noam <amir.noam at intel dot com> - * - Fixed: Cannot remove and re-enslave the original active slave. - * - * 2004/01/14 - Shmulik Hen <shmulik.hen at intel dot com> - * - Add capability to tag self generated packets in ALB/TLB modes. */ //#define BONDING_DEBUG 1 @@ -198,20 +179,21 @@ static int tlb_initialize(struct bonding *bond) { struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond)); int size = TLB_HASH_TABLE_SIZE * sizeof(struct tlb_client_info); + struct tlb_client_info *new_hashtbl; int i; spin_lock_init(&(bond_info->tx_hashtbl_lock)); - _lock_tx_hashtbl(bond); - - bond_info->tx_hashtbl = kmalloc(size, GFP_KERNEL); - if (!bond_info->tx_hashtbl) { + new_hashtbl = kmalloc(size, GFP_KERNEL); + if (!new_hashtbl) { printk(KERN_ERR DRV_NAME - ": Error: %s: Failed to allocate TLB hash table\n", + ": %s: Error: Failed to allocate TLB hash table\n", bond->dev->name); - _unlock_tx_hashtbl(bond); return -1; } + _lock_tx_hashtbl(bond); + + bond_info->tx_hashtbl = new_hashtbl; memset(bond_info->tx_hashtbl, 0, size); @@ -513,7 +495,8 @@ static void rlb_update_client(struct rlb_client_info *client_info) client_info->mac_dst); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to create an ARP packet\n"); + ": %s: Error: failed to create an ARP packet\n", + client_info->slave->dev->master->name); continue; } @@ -523,7 +506,8 @@ static void rlb_update_client(struct rlb_client_info *client_info) skb = vlan_put_tag(skb, client_info->vlan_id); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to insert VLAN tag\n"); + ": %s: Error: failed to insert VLAN tag\n", + client_info->slave->dev->master->name); continue; } } @@ -606,8 +590,9 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, u32 src_ip) if (!client_info->slave) { printk(KERN_ERR DRV_NAME - ": Error: found a client with no channel in " - "the client's hash table\n"); + ": %s: Error: found a client with no channel in " + "the client's hash table\n", + bond->dev->name); continue; } /*update all clients using this src_ip, that are not assigned @@ -797,21 +782,22 @@ static int rlb_initialize(struct bonding *bond) { struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond)); struct packet_type *pk_type = &(BOND_ALB_INFO(bond).rlb_pkt_type); + struct rlb_client_info *new_hashtbl; int size = RLB_HASH_TABLE_SIZE * sizeof(struct rlb_client_info); int i; spin_lock_init(&(bond_info->rx_hashtbl_lock)); - _lock_rx_hashtbl(bond); - - bond_info->rx_hashtbl = kmalloc(size, GFP_KERNEL); - if (!bond_info->rx_hashtbl) { + new_hashtbl = kmalloc(size, GFP_KERNEL); + if (!new_hashtbl) { printk(KERN_ERR DRV_NAME - ": Error: %s: Failed to allocate RLB hash table\n", + ": %s: Error: Failed to allocate RLB hash table\n", bond->dev->name); - _unlock_rx_hashtbl(bond); return -1; } + _lock_rx_hashtbl(bond); + + bond_info->rx_hashtbl = new_hashtbl; bond_info->rx_hashtbl_head = RLB_NULL_INDEX; @@ -927,7 +913,8 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) skb = vlan_put_tag(skb, vlan->vlan_id); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to insert VLAN tag\n"); + ": %s: Error: failed to insert VLAN tag\n", + bond->dev->name); continue; } } @@ -956,11 +943,11 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw) s_addr.sa_family = dev->type; if (dev_set_mac_address(dev, &s_addr)) { printk(KERN_ERR DRV_NAME - ": Error: dev_set_mac_address of dev %s failed! ALB " + ": %s: Error: dev_set_mac_address of dev %s failed! ALB " "mode requires that the base driver support setting " "the hw address also when the network device's " "interface is open\n", - dev->name); + dev->master->name, dev->name); return -EOPNOTSUPP; } return 0; @@ -1153,16 +1140,16 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav bond->alb_info.rlb_enabled); printk(KERN_WARNING DRV_NAME - ": Warning: the hw address of slave %s is in use by " + ": %s: Warning: the hw address of slave %s is in use by " "the bond; giving it the hw address of %s\n", - slave->dev->name, free_mac_slave->dev->name); + bond->dev->name, slave->dev->name, free_mac_slave->dev->name); } else if (has_bond_addr) { printk(KERN_ERR DRV_NAME - ": Error: the hw address of slave %s is in use by the " + ": %s: Error: the hw address of slave %s is in use by the " "bond; couldn't find a slave with a free hw address to " "give it (this should not have happened)\n", - slave->dev->name); + bond->dev->name, slave->dev->name); return -EFAULT; } @@ -1250,6 +1237,8 @@ int bond_alb_initialize(struct bonding *bond, int rlb_enabled) tlb_deinitialize(bond); return res; } + } else { + bond->alb_info.rlb_enabled = 0; } return 0; @@ -1409,7 +1398,7 @@ void bond_alb_monitor(struct bonding *bond) read_lock(&bond->curr_slave_lock); bond_for_each_slave(bond, slave, i) { - alb_send_learning_packets(slave,slave->dev->dev_addr); + alb_send_learning_packets(slave, slave->dev->dev_addr); } read_unlock(&bond->curr_slave_lock); diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h index e4091cd8d654..28f2a2fd1b5a 100644 --- a/drivers/net/bonding/bond_alb.h +++ b/drivers/net/bonding/bond_alb.h @@ -18,15 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/08/06 - Amir Noam <amir.noam at intel dot com> - * - Add support for setting bond's MAC address with special - * handling required for ALB/TLB. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes */ #ifndef __BOND_ALB_H__ diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 94cec3cf2a13..2582d98ef5c3 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -29,466 +29,6 @@ * b: if a hw mac address already is there, eth0's hw mac address * will then be set from bond0. * - * v0.1 - first working version. - * v0.2 - changed stats to be calculated by summing slaves stats. - * - * Changes: - * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - * - fix leaks on failure at bond_init - * - * 2000/09/30 - Willy Tarreau <willy at meta-x.org> - * - added trivial code to release a slave device. - * - fixed security bug (CAP_NET_ADMIN not checked) - * - implemented MII link monitoring to disable dead links : - * All MII capable slaves are checked every <miimon> milliseconds - * (100 ms seems good). This value can be changed by passing it to - * insmod. A value of zero disables the monitoring (default). - * - fixed an infinite loop in bond_xmit_roundrobin() when there's no - * good slave. - * - made the code hopefully SMP safe - * - * 2000/10/03 - Willy Tarreau <willy at meta-x.org> - * - optimized slave lists based on relevant suggestions from Thomas Davis - * - implemented active-backup method to obtain HA with two switches: - * stay as long as possible on the same active interface, while we - * also monitor the backup one (MII link status) because we want to know - * if we are able to switch at any time. ( pass "mode=1" to insmod ) - * - lots of stress testings because we need it to be more robust than the - * wires ! :-> - * - * 2000/10/09 - Willy Tarreau <willy at meta-x.org> - * - added up and down delays after link state change. - * - optimized the slaves chaining so that when we run forward, we never - * repass through the bond itself, but we can find it by searching - * backwards. Renders the deletion more difficult, but accelerates the - * scan. - * - smarter enslaving and releasing. - * - finer and more robust SMP locking - * - * 2000/10/17 - Willy Tarreau <willy at meta-x.org> - * - fixed two potential SMP race conditions - * - * 2000/10/18 - Willy Tarreau <willy at meta-x.org> - * - small fixes to the monitoring FSM in case of zero delays - * 2000/11/01 - Willy Tarreau <willy at meta-x.org> - * - fixed first slave not automatically used in trunk mode. - * 2000/11/10 : spelling of "EtherChannel" corrected. - * 2000/11/13 : fixed a race condition in case of concurrent accesses to ioctl(). - * 2000/12/16 : fixed improper usage of rtnl_exlock_nowait(). - * - * 2001/1/3 - Chad N. Tindel <ctindel at ieee dot org> - * - The bonding driver now simulates MII status monitoring, just like - * a normal network device. It will show that the link is down iff - * every slave in the bond shows that their links are down. If at least - * one slave is up, the bond's MII status will appear as up. - * - * 2001/2/7 - Chad N. Tindel <ctindel at ieee dot org> - * - Applications can now query the bond from user space to get - * information which may be useful. They do this by calling - * the BOND_INFO_QUERY ioctl. Once the app knows how many slaves - * are in the bond, it can call the BOND_SLAVE_INFO_QUERY ioctl to - * get slave specific information (# link failures, etc). See - * <linux/if_bonding.h> for more details. The structs of interest - * are ifbond and ifslave. - * - * 2001/4/5 - Chad N. Tindel <ctindel at ieee dot org> - * - Ported to 2.4 Kernel - * - * 2001/5/2 - Jeffrey E. Mast <jeff at mastfamily dot com> - * - When a device is detached from a bond, the slave device is no longer - * left thinking that is has a master. - * - * 2001/5/16 - Jeffrey E. Mast <jeff at mastfamily dot com> - * - memset did not appropriately initialized the bond rw_locks. Used - * rwlock_init to initialize to unlocked state to prevent deadlock when - * first attempting a lock - * - Called SET_MODULE_OWNER for bond device - * - * 2001/5/17 - Tim Anderson <tsa at mvista.com> - * - 2 paths for releasing for slave release; 1 through ioctl - * and 2) through close. Both paths need to release the same way. - * - the free slave in bond release is changing slave status before - * the free. The netdev_set_master() is intended to change slave state - * so it should not be done as part of the release process. - * - Simple rule for slave state at release: only the active in A/B and - * only one in the trunked case. - * - * 2001/6/01 - Tim Anderson <tsa at mvista.com> - * - Now call dev_close when releasing a slave so it doesn't screw up - * out routing table. - * - * 2001/6/01 - Chad N. Tindel <ctindel at ieee dot org> - * - Added /proc support for getting bond and slave information. - * Information is in /proc/net/<bond device>/info. - * - Changed the locking when calling bond_close to prevent deadlock. - * - * 2001/8/05 - Janice Girouard <girouard at us.ibm.com> - * - correct problem where refcnt of slave is not incremented in bond_ioctl - * so the system hangs when halting. - * - correct locking problem when unable to malloc in bond_enslave. - * - adding bond_xmit_xor logic. - * - adding multiple bond device support. - * - * 2001/8/13 - Erik Habbinga <erik_habbinga at hp dot com> - * - correct locking problem with rtnl_exlock_nowait - * - * 2001/8/23 - Janice Girouard <girouard at us.ibm.com> - * - bzero initial dev_bonds, to correct oops - * - convert SIOCDEVPRIVATE to new MII ioctl calls - * - * 2001/9/13 - Takao Indoh <indou dot takao at jp dot fujitsu dot com> - * - Add the BOND_CHANGE_ACTIVE ioctl implementation - * - * 2001/9/14 - Mark Huth <mhuth at mvista dot com> - * - Change MII_LINK_READY to not check for end of auto-negotiation, - * but only for an up link. - * - * 2001/9/20 - Chad N. Tindel <ctindel at ieee dot org> - * - Add the device field to bonding_t. Previously the net_device - * corresponding to a bond wasn't available from the bonding_t - * structure. - * - * 2001/9/25 - Janice Girouard <girouard at us.ibm.com> - * - add arp_monitor for active backup mode - * - * 2001/10/23 - Takao Indoh <indou dot takao at jp dot fujitsu dot com> - * - Various memory leak fixes - * - * 2001/11/5 - Mark Huth <mark dot huth at mvista dot com> - * - Don't take rtnl lock in bond_mii_monitor as it deadlocks under - * certain hotswap conditions. - * Note: this same change may be required in bond_arp_monitor ??? - * - Remove possibility of calling bond_sethwaddr with NULL slave_dev ptr - * - Handle hot swap ethernet interface deregistration events to remove - * kernel oops following hot swap of enslaved interface - * - * 2002/1/2 - Chad N. Tindel <ctindel at ieee dot org> - * - Restore original slave flags at release time. - * - * 2002/02/18 - Erik Habbinga <erik_habbinga at hp dot com> - * - bond_release(): calling kfree on our_slave after call to - * bond_restore_slave_flags, not before - * - bond_enslave(): saving slave flags into original_flags before - * call to netdev_set_master, so the IFF_SLAVE flag doesn't end - * up in original_flags - * - * 2002/04/05 - Mark Smith <mark.smith at comdev dot cc> and - * Steve Mead <steve.mead at comdev dot cc> - * - Port Gleb Natapov's multicast support patchs from 2.4.12 - * to 2.4.18 adding support for multicast. - * - * 2002/06/10 - Tony Cureington <tony.cureington * hp_com> - * - corrected uninitialized pointer (ifr.ifr_data) in bond_check_dev_link; - * actually changed function to use MIIPHY, then MIIREG, and finally - * ETHTOOL to determine the link status - * - fixed bad ifr_data pointer assignments in bond_ioctl - * - corrected mode 1 being reported as active-backup in bond_get_info; - * also added text to distinguish type of load balancing (rr or xor) - * - change arp_ip_target module param from "1-12s" (array of 12 ptrs) - * to "s" (a single ptr) - * - * 2002/08/30 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Removed acquisition of xmit_lock in set_multicast_list; caused - * deadlock on SMP (lock is held by caller). - * - Revamped SIOCGMIIPHY, SIOCGMIIREG portion of bond_check_dev_link(). - * - * 2002/09/18 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Fixed up bond_check_dev_link() (and callers): removed some magic - * numbers, banished local MII_ defines, wrapped ioctl calls to - * prevent EFAULT errors - * - * 2002/9/30 - Jay Vosburgh <fubar at us dot ibm dot com> - * - make sure the ip target matches the arp_target before saving the - * hw address. - * - * 2002/9/30 - Dan Eisner <eisner at 2robots dot com> - * - make sure my_ip is set before taking down the link, since - * not all switches respond if the source ip is not set. - * - * 2002/10/8 - Janice Girouard <girouard at us dot ibm dot com> - * - read in the local ip address when enslaving a device - * - add primary support - * - make sure 2*arp_interval has passed when a new device - * is brought on-line before taking it down. - * - * 2002/09/11 - Philippe De Muyter <phdm at macqel dot be> - * - Added bond_xmit_broadcast logic. - * - Added bond_mode() support function. - * - * 2002/10/26 - Laurent Deniel <laurent.deniel at free.fr> - * - allow to register multicast addresses only on active slave - * (useful in active-backup mode) - * - add multicast module parameter - * - fix deletion of multicast groups after unloading module - * - * 2002/11/06 - Kameshwara Rayaprolu <kameshwara.rao * wipro_com> - * - Changes to prevent panic from closing the device twice; if we close - * the device in bond_release, we must set the original_flags to down - * so it won't be closed again by the network layer. - * - * 2002/11/07 - Tony Cureington <tony.cureington * hp_com> - * - Fix arp_target_hw_addr memory leak - * - Created activebackup_arp_monitor function to handle arp monitoring - * in active backup mode - the bond_arp_monitor had several problems... - * such as allowing slaves to tx arps sequentially without any delay - * for a response - * - Renamed bond_arp_monitor to loadbalance_arp_monitor and re-wrote - * this function to just handle arp monitoring in load-balancing mode; - * it is a lot more compact now - * - Changes to ensure one and only one slave transmits in active-backup - * mode - * - Robustesize parameters; warn users about bad combinations of - * parameters; also if miimon is specified and a network driver does - * not support MII or ETHTOOL, inform the user of this - * - Changes to support link_failure_count when in arp monitoring mode - * - Fix up/down delay reported in /proc - * - Added version; log version; make version available from "modinfo -d" - * - Fixed problem in bond_check_dev_link - if the first IOCTL (SIOCGMIIPH) - * failed, the ETHTOOL ioctl never got a chance - * - * 2002/11/16 - Laurent Deniel <laurent.deniel at free.fr> - * - fix multicast handling in activebackup_arp_monitor - * - remove one unnecessary and confusing curr_active_slave == slave test - * in activebackup_arp_monitor - * - * 2002/11/17 - Laurent Deniel <laurent.deniel at free.fr> - * - fix bond_slave_info_query when slave_id = num_slaves - * - * 2002/11/19 - Janice Girouard <girouard at us dot ibm dot com> - * - correct ifr_data reference. Update ifr_data reference - * to mii_ioctl_data struct values to avoid confusion. - * - * 2002/11/22 - Bert Barbe <bert.barbe at oracle dot com> - * - Add support for multiple arp_ip_target - * - * 2002/12/13 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Changed to allow text strings for mode and multicast, e.g., - * insmod bonding mode=active-backup. The numbers still work. - * One change: an invalid choice will cause module load failure, - * rather than the previous behavior of just picking one. - * - Minor cleanups; got rid of dup ctype stuff, atoi function - * - * 2003/02/07 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Added use_carrier module parameter that causes miimon to - * use netif_carrier_ok() test instead of MII/ETHTOOL ioctls. - * - Minor cleanups; consolidated ioctl calls to one function. - * - * 2003/02/07 - Tony Cureington <tony.cureington * hp_com> - * - Fix bond_mii_monitor() logic error that could result in - * bonding round-robin mode ignoring links after failover/recovery - * - * 2003/03/17 - Jay Vosburgh <fubar at us dot ibm dot com> - * - kmalloc fix (GFP_KERNEL to GFP_ATOMIC) reported by - * Shmulik dot Hen at intel.com. - * - Based on discussion on mailing list, changed use of - * update_slave_cnt(), created wrapper functions for adding/removing - * slaves, changed bond_xmit_xor() to check slave_cnt instead of - * checking slave and slave->dev (which only worked by accident). - * - Misc code cleanup: get arp_send() prototype from header file, - * add max_bonds to bonding.txt. - * - * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Make sure only bond_attach_slave() and bond_detach_slave() can - * manipulate the slave list, including slave_cnt, even when in - * bond_release_all(). - * - Fixed hang in bond_release() with traffic running: - * netdev_set_master() must not be called from within the bond lock. - * - * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Fixed hang in bond_enslave() with traffic running: - * netdev_set_master() must not be called from within the bond lock. - * - * 2003/03/18 - Amir Noam <amir.noam at intel dot com> - * - Added support for getting slave's speed and duplex via ethtool. - * Needed for 802.3ad and other future modes. - * - * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Enable support of modes that need to use the unique mac address of - * each slave. - * * bond_enslave(): Moved setting the slave's mac address, and - * openning it, from the application to the driver. This breaks - * backward comaptibility with old versions of ifenslave that open - * the slave before enalsving it !!!. - * * bond_release(): The driver also takes care of closing the slave - * and restoring its original mac address. - * - Removed the code that restores all base driver's flags. - * Flags are automatically restored once all undo stages are done - * properly. - * - Block possibility of enslaving before the master is up. This - * prevents putting the system in an unstable state. - * - * 2003/03/18 - Amir Noam <amir.noam at intel dot com>, - * Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Added support for IEEE 802.3ad Dynamic link aggregation mode. - * - * 2003/05/01 - Amir Noam <amir.noam at intel dot com> - * - Added ABI version control to restore compatibility between - * new/old ifenslave and new/old bonding. - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Fixed bug in bond_release_all(): save old value of curr_active_slave - * before setting it to NULL. - * - Changed driver versioning scheme to include version number instead - * of release date (that is already in another field). There are 3 - * fields X.Y.Z where: - * X - Major version - big behavior changes - * Y - Minor version - addition of features - * Z - Extra version - minor changes and bug fixes - * The current version is 1.0.0 as a base line. - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Amir Noam <amir.noam at intel dot com> - * - Added support for lacp_rate module param. - * - Code beautification and style changes (mainly in comments). - * new version - 1.0.1 - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Based on discussion on mailing list, changed locking scheme - * to use lock/unlock or lock_bh/unlock_bh appropriately instead - * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing - * hidden bugs and solves system hangs that occurred due to the fact - * that holding lock_irqsave doesn't prevent softirqs from running. - * This also increases total throughput since interrupts are not - * blocked on each transmitted packets or monitor timeout. - * new version - 2.0.0 - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Added support for Transmit load balancing mode. - * - Concentrate all assignments of curr_active_slave to a single point - * so specific modes can take actions when the primary adapter is - * changed. - * - Take the updelay parameter into consideration during bond_enslave - * since some adapters loose their link during setting the device. - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * new version - 2.1.0 - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> - * - Added support for Adaptive load balancing mode which is - * equivalent to Transmit load balancing + Receive load balancing. - * new version - 2.2.0 - * - * 2003/05/15 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Applied fix to activebackup_arp_monitor posted to bonding-devel - * by Tony Cureington <tony.cureington * hp_com>. Fixes ARP - * monitor endless failover bug. Version to 2.2.10 - * - * 2003/05/20 - Amir Noam <amir.noam at intel dot com> - * - Fixed bug in ABI version control - Don't commit to a specific - * ABI version if receiving unsupported ioctl commands. - * - * 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com> - * - Fix ifenslave -c causing bond to loose existing routes; - * added bond_set_mac_address() that doesn't require the - * bond to be down. - * - In conjunction with fix for ifenslave -c, in - * bond_change_active(), changing to the already active slave - * is no longer an error (it successfully does nothing). - * - * 2003/06/30 - Amir Noam <amir.noam at intel dot com> - * - Fixed bond_change_active() for ALB/TLB modes. - * Version to 2.2.14. - * - * 2003/07/29 - Amir Noam <amir.noam at intel dot com> - * - Fixed ARP monitoring bug. - * Version to 2.2.15. - * - * 2003/07/31 - Willy Tarreau <willy at ods dot org> - * - Fixed kernel panic when using ARP monitoring without - * setting bond's IP address. - * Version to 2.2.16. - * - * 2003/08/06 - Amir Noam <amir.noam at intel dot com> - * - Back port from 2.6: use alloc_netdev(); fix /proc handling; - * made stats a part of bond struct so no need to allocate - * and free it separately; use standard list operations instead - * of pre-allocated array of bonds. - * Version to 2.3.0. - * - * 2003/08/07 - Jay Vosburgh <fubar at us dot ibm dot com>, - * Amir Noam <amir.noam at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Propagating master's settings: Distinguish between modes that - * use a primary slave from those that don't, and propagate settings - * accordingly; Consolidate change_active opeartions and add - * reselect_active and find_best opeartions; Decouple promiscuous - * handling from the multicast mode setting; Add support for changing - * HW address and MTU with proper unwind; Consolidate procfs code, - * add CHANGENAME handler; Enhance netdev notification handling. - * Version to 2.4.0. - * - * 2003/09/15 - Stephen Hemminger <shemminger at osdl dot org>, - * Amir Noam <amir.noam at intel dot com> - * - Convert /proc to seq_file interface. - * Change /proc/net/bondX/info to /proc/net/bonding/bondX. - * Set version to 2.4.1. - * - * 2003/11/20 - Amir Noam <amir.noam at intel dot com> - * - Fix /proc creation/destruction. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Massive cleanup - Set version to 2.5.0 - * Code changes: - * o Consolidate format of prints and debug prints. - * o Remove bonding_t/slave_t typedefs and consolidate all casts. - * o Remove dead code and unnecessary checks. - * o Consolidate starting/stopping timers. - * o Consolidate handling of primary module param throughout the code. - * o Removed multicast module param support - all settings are done - * according to mode. - * o Slave list iteration - bond is no longer part of the list, - * added cyclic list iteration macros. - * o Consolidate error handling in all xmit functions. - * Style changes: - * o Consolidate function naming and declarations. - * o Consolidate function params and local variables names. - * o Consolidate return values. - * o Consolidate curly braces. - * o Consolidate conditionals format. - * o Change struct member names and types. - * o Chomp trailing spaces, remove empty lines, fix indentations. - * o Re-organize code according to context. - * - * 2003/12/30 - Amir Noam <amir.noam at intel dot com> - * - Fixed: Cannot remove and re-enslave the original active slave. - * - Fixed: Releasing the original active slave causes mac address - * duplication. - * - Add support for slaves that use ethtool_ops. - * Set version to 2.5.3. - * - * 2004/01/05 - Amir Noam <amir.noam at intel dot com> - * - Save bonding parameters per bond instead of using the global values. - * Set version to 2.5.4. - * - * 2004/01/14 - Shmulik Hen <shmulik.hen at intel dot com> - * - Enhance VLAN support: - * * Add support for VLAN hardware acceleration capable slaves. - * * Add capability to tag self generated packets in ALB/TLB modes. - * Set version to 2.6.0. - * 2004/10/29 - Mitch Williams <mitch.a.williams at intel dot com> - * - Fixed bug when unloading module while using 802.3ad. If - * spinlock debugging is turned on, this causes a stack dump. - * Solution is to move call to dev_remove_pack outside of the - * spinlock. - * Set version to 2.6.1. - * 2005/06/05 - Jay Vosburgh <fubar@us.ibm.com> - * - Support for generating gratuitous ARPs in active-backup mode. - * Includes support for VLAN tagging all bonding-generated ARPs - * as needed. Set version to 2.6.2. - * 2005/06/08 - Jason Gabler <jygabler at lbl dot gov> - * - alternate hashing policy support for mode 2 - * * Added kernel parameter "xmit_hash_policy" to allow the selection - * of different hashing policies for mode 2. The original mode 2 - * policy is the default, now found in xmit_hash_policy_layer2(). - * * Added xmit_hash_policy_layer34() - * - Modified by Jay Vosburgh <fubar@us.ibm.com> to also support mode 4. - * Set version to 2.6.3. - * 2005/09/26 - Jay Vosburgh <fubar@us.ibm.com> - * - Removed backwards compatibility for old ifenslaves. Version 2.6.4. */ //#define BONDING_DEBUG 1 @@ -557,6 +97,7 @@ static char *lacp_rate = NULL; static char *xmit_hash_policy = NULL; static int arp_interval = BOND_LINK_ARP_INTERV; static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, }; +struct bond_params bonding_defaults; module_param(max_bonds, int, 0); MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); @@ -565,17 +106,24 @@ MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds"); module_param(downdelay, int, 0); -MODULE_PARM_DESC(downdelay, "Delay before considering link down, in milliseconds"); +MODULE_PARM_DESC(downdelay, "Delay before considering link down, " + "in milliseconds"); module_param(use_carrier, int, 0); -MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default)"); +MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " + "0 for off, 1 for on (default)"); module_param(mode, charp, 0); -MODULE_PARM_DESC(mode, "Mode of operation : 0 for round robin, 1 for active-backup, 2 for xor"); +MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, " + "1 for active-backup, 2 for balance-xor, " + "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " + "6 for balance-alb"); module_param(primary, charp, 0); MODULE_PARM_DESC(primary, "Primary network device to use"); module_param(lacp_rate, charp, 0); -MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)"); +MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " + "(slow/fast)"); module_param(xmit_hash_policy, charp, 0); -MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4"); +MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" + ", 1 for layer 3+4"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); @@ -586,30 +134,27 @@ MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); static const char *version = DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n"; -static LIST_HEAD(bond_dev_list); +LIST_HEAD(bond_dev_list); #ifdef CONFIG_PROC_FS static struct proc_dir_entry *bond_proc_dir = NULL; #endif +extern struct rw_semaphore bonding_rwsem; static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ; static int arp_ip_count = 0; static int bond_mode = BOND_MODE_ROUNDROBIN; static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2; static int lacp_fast = 0; -struct bond_parm_tbl { - char *modename; - int mode; -}; -static struct bond_parm_tbl bond_lacp_tbl[] = { +struct bond_parm_tbl bond_lacp_tbl[] = { { "slow", AD_LACP_SLOW}, { "fast", AD_LACP_FAST}, { NULL, -1}, }; -static struct bond_parm_tbl bond_mode_tbl[] = { +struct bond_parm_tbl bond_mode_tbl[] = { { "balance-rr", BOND_MODE_ROUNDROBIN}, { "active-backup", BOND_MODE_ACTIVEBACKUP}, { "balance-xor", BOND_MODE_XOR}, @@ -620,7 +165,7 @@ static struct bond_parm_tbl bond_mode_tbl[] = { { NULL, -1}, }; -static struct bond_parm_tbl xmit_hashtype_tbl[] = { +struct bond_parm_tbl xmit_hashtype_tbl[] = { { "layer2", BOND_XMIT_POLICY_LAYER2}, { "layer3+4", BOND_XMIT_POLICY_LAYER34}, { NULL, -1}, @@ -628,12 +173,11 @@ static struct bond_parm_tbl xmit_hashtype_tbl[] = { /*-------------------------- Forward declarations ---------------------------*/ -static inline void bond_set_mode_ops(struct bonding *bond, int mode); static void bond_send_gratuitous_arp(struct bonding *bond); /*---------------------------- General routines -----------------------------*/ -static const char *bond_mode_name(int mode) +const char *bond_mode_name(int mode) { switch (mode) { case BOND_MODE_ROUNDROBIN : @@ -910,7 +454,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid) res = bond_add_vlan(bond, vid); if (res) { printk(KERN_ERR DRV_NAME - ": %s: Failed to add vlan id %d\n", + ": %s: Error: Failed to add vlan id %d\n", bond_dev->name, vid); } } @@ -944,7 +488,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid) res = bond_del_vlan(bond, vid); if (res) { printk(KERN_ERR DRV_NAME - ": %s: Failed to remove vlan id %d\n", + ": %s: Error: Failed to remove vlan id %d\n", bond_dev->name, vid); } } @@ -1449,7 +993,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond) * * Warning: Caller must hold curr_slave_lock for writing. */ -static void bond_change_active_slave(struct bonding *bond, struct slave *new_active) +void bond_change_active_slave(struct bonding *bond, struct slave *new_active) { struct slave *old_active = bond->curr_active_slave; @@ -1523,7 +1067,7 @@ static void bond_change_active_slave(struct bonding *bond, struct slave *new_act * * Warning: Caller must hold curr_slave_lock for writing. */ -static void bond_select_active_slave(struct bonding *bond) +void bond_select_active_slave(struct bonding *bond) { struct slave *best_slave; @@ -1591,7 +1135,7 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave) /*---------------------------------- IOCTL ----------------------------------*/ -static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev) { dprintk("bond_dev=%p\n", bond_dev); dprintk("slave_dev=%p\n", slave_dev); @@ -1631,7 +1175,7 @@ static int bond_compute_features(struct bonding *bond) } /* enslave device <slave> to bond device <master> */ -static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) { struct bonding *bond = bond_dev->priv; struct slave *new_slave = NULL; @@ -1644,8 +1188,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL && slave_dev->do_ioctl == NULL) { printk(KERN_WARNING DRV_NAME - ": Warning : no link monitoring support for %s\n", - slave_dev->name); + ": %s: Warning: no link monitoring support for %s\n", + bond_dev->name, slave_dev->name); } /* bond must be initialized by bond_open() before enslaving */ @@ -1666,17 +1210,17 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); if (!list_empty(&bond->vlan_list)) { printk(KERN_ERR DRV_NAME - ": Error: cannot enslave VLAN " + ": %s: Error: cannot enslave VLAN " "challenged slave %s on VLAN enabled " - "bond %s\n", slave_dev->name, + "bond %s\n", bond_dev->name, slave_dev->name, bond_dev->name); return -EPERM; } else { printk(KERN_WARNING DRV_NAME - ": Warning: enslaved VLAN challenged " + ": %s: Warning: enslaved VLAN challenged " "slave %s. Adding VLANs will be blocked as " "long as %s is part of bond %s\n", - slave_dev->name, slave_dev->name, + bond_dev->name, slave_dev->name, slave_dev->name, bond_dev->name); bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } @@ -1706,12 +1250,11 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (slave_dev->set_mac_address == NULL) { printk(KERN_ERR DRV_NAME - ": Error: The slave device you specified does " - "not support setting the MAC address.\n"); - printk(KERN_ERR - "Your kernel likely does not support slave devices.\n"); - - res = -EOPNOTSUPP; + ": %s: Error: The slave device you specified does " + "not support setting the MAC address. " + "Your kernel likely does not support slave " + "devices.\n", bond_dev->name); + res = -EOPNOTSUPP; goto err_undo_flags; } @@ -1827,21 +1370,21 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de * the messages for netif_carrier. */ printk(KERN_WARNING DRV_NAME - ": Warning: MII and ETHTOOL support not " + ": %s: Warning: MII and ETHTOOL support not " "available for interface %s, and " "arp_interval/arp_ip_target module parameters " "not specified, thus bonding will not detect " "link failures! see bonding.txt for details.\n", - slave_dev->name); + bond_dev->name, slave_dev->name); } else if (link_reporting == -1) { /* unable get link status using mii/ethtool */ printk(KERN_WARNING DRV_NAME - ": Warning: can't get link status from " + ": %s: Warning: can't get link status from " "interface %s; the network driver associated " "with this interface does not support MII or " "ETHTOOL link status reporting, thus miimon " "has no effect on this interface.\n", - slave_dev->name); + bond_dev->name, slave_dev->name); } } @@ -1868,15 +1411,15 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (bond_update_speed_duplex(new_slave) && (new_slave->link != BOND_LINK_DOWN)) { printk(KERN_WARNING DRV_NAME - ": Warning: failed to get speed and duplex from %s, " + ": %s: Warning: failed to get speed and duplex from %s, " "assumed to be 100Mb/sec and Full.\n", - new_slave->dev->name); + bond_dev->name, new_slave->dev->name); if (bond->params.mode == BOND_MODE_8023AD) { - printk(KERN_WARNING - "Operation of 802.3ad mode requires ETHTOOL " + printk(KERN_WARNING DRV_NAME + ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL " "support in base driver for proper aggregator " - "selection.\n"); + "selection.\n", bond_dev->name); } } @@ -1958,6 +1501,10 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de write_unlock_bh(&bond->lock); + res = bond_create_slave_symlinks(bond_dev, slave_dev); + if (res) + goto err_unset_master; + printk(KERN_INFO DRV_NAME ": %s: enslaving %s as a%s interface with a%s link.\n", bond_dev->name, slave_dev->name, @@ -1999,7 +1546,7 @@ err_undo_flags: * for Bonded connections: * The first up interface should be left on and all others downed. */ -static int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2010,7 +1557,7 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev)) { printk(KERN_ERR DRV_NAME - ": Error: %s: cannot release %s.\n", + ": %s: Error: cannot release %s.\n", bond_dev->name, slave_dev->name); return -EINVAL; } @@ -2031,11 +1578,12 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de ETH_ALEN); if (!mac_addr_differ && (bond->slave_cnt > 1)) { printk(KERN_WARNING DRV_NAME - ": Warning: the permanent HWaddr of %s " + ": %s: Warning: the permanent HWaddr of %s " "- %02X:%02X:%02X:%02X:%02X:%02X - is " "still in use by %s. Set the HWaddr of " "%s to a different address to avoid " "conflicts.\n", + bond_dev->name, slave_dev->name, slave->perm_hwaddr[0], slave->perm_hwaddr[1], @@ -2111,24 +1659,28 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } else { printk(KERN_WARNING DRV_NAME - ": Warning: clearing HW address of %s while it " + ": %s: Warning: clearing HW address of %s while it " "still has VLANs.\n", - bond_dev->name); + bond_dev->name, bond_dev->name); printk(KERN_WARNING DRV_NAME - ": When re-adding slaves, make sure the bond's " - "HW address matches its VLANs'.\n"); + ": %s: When re-adding slaves, make sure the bond's " + "HW address matches its VLANs'.\n", + bond_dev->name); } } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) && !bond_has_challenged_slaves(bond)) { printk(KERN_INFO DRV_NAME - ": last VLAN challenged slave %s " + ": %s: last VLAN challenged slave %s " "left bond %s. VLAN blocking is removed\n", - slave_dev->name, bond_dev->name); + bond_dev->name, slave_dev->name, bond_dev->name); bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED; } write_unlock_bh(&bond->lock); + /* must do this from outside any spinlocks */ + bond_destroy_slave_symlinks(bond_dev, slave_dev); + bond_del_vlans_from_slave(bond, slave_dev); /* If the mode USES_PRIMARY, then we should only remove its @@ -2220,6 +1772,7 @@ static int bond_release_all(struct net_device *bond_dev) */ write_unlock_bh(&bond->lock); + bond_destroy_slave_symlinks(bond_dev, slave_dev); bond_del_vlans_from_slave(bond, slave_dev); /* If the mode USES_PRIMARY, then we should only remove its @@ -2274,12 +1827,13 @@ static int bond_release_all(struct net_device *bond_dev) bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } else { printk(KERN_WARNING DRV_NAME - ": Warning: clearing HW address of %s while it " + ": %s: Warning: clearing HW address of %s while it " "still has VLANs.\n", - bond_dev->name); + bond_dev->name, bond_dev->name); printk(KERN_WARNING DRV_NAME - ": When re-adding slaves, make sure the bond's " - "HW address matches its VLANs'.\n"); + ": %s: When re-adding slaves, make sure the bond's " + "HW address matches its VLANs'.\n", + bond_dev->name); } printk(KERN_INFO DRV_NAME @@ -2397,7 +1951,7 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in /*-------------------------------- Monitoring -------------------------------*/ /* this function is called regularly to monitor each slave's link. */ -static void bond_mii_monitor(struct net_device *bond_dev) +void bond_mii_monitor(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2596,8 +2150,11 @@ static void bond_mii_monitor(struct net_device *bond_dev) break; default: /* Should not happen */ - printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n", - slave->dev->name, slave->link); + printk(KERN_ERR DRV_NAME + ": %s: Error: %s Illegal value (link=%d)\n", + bond_dev->name, + slave->dev->name, + slave->link); goto out; } /* end of switch (slave->link) */ @@ -2721,7 +2278,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) struct flowi fl; struct rtable *rt; - for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (!targets[i]) + continue; dprintk("basa: target %x\n", targets[i]); if (list_empty(&bond->vlan_list)) { dprintk("basa: empty vlan: arp_send\n"); @@ -2825,7 +2384,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond) * arp is transmitted to generate traffic. see activebackup_arp_monitor for * arp monitoring in active backup mode. */ -static void bond_loadbalance_arp_mon(struct net_device *bond_dev) +void bond_loadbalance_arp_mon(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2963,7 +2522,7 @@ out: * may have received. * see loadbalance_arp_monitor for arp monitoring in load balancing mode */ -static void bond_activebackup_arp_mon(struct net_device *bond_dev) +void bond_activebackup_arp_mon(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave; @@ -3249,6 +2808,8 @@ static void bond_info_show_master(struct seq_file *seq) { struct bonding *bond = seq->private; struct slave *curr; + int i; + u32 target; read_lock(&bond->curr_slave_lock); curr = bond->curr_active_slave; @@ -3257,10 +2818,17 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Bonding Mode: %s\n", bond_mode_name(bond->params.mode)); + if (bond->params.mode == BOND_MODE_XOR || + bond->params.mode == BOND_MODE_8023AD) { + seq_printf(seq, "Transmit Hash Policy: %s (%d)\n", + xmit_hashtype_tbl[bond->params.xmit_policy].modename, + bond->params.xmit_policy); + } + if (USES_PRIMARY(bond->params.mode)) { seq_printf(seq, "Primary Slave: %s\n", - (bond->params.primary[0]) ? - bond->params.primary : "None"); + (bond->primary_slave) ? + bond->primary_slave->dev->name : "None"); seq_printf(seq, "Currently Active Slave: %s\n", (curr) ? curr->dev->name : "None"); @@ -3273,6 +2841,27 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Down Delay (ms): %d\n", bond->params.downdelay * bond->params.miimon); + + /* ARP information */ + if(bond->params.arp_interval > 0) { + int printed=0; + seq_printf(seq, "ARP Polling Interval (ms): %d\n", + bond->params.arp_interval); + + seq_printf(seq, "ARP IP target/s (n.n.n.n form):"); + + for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) { + if (!bond->params.arp_targets[i]) + continue; + if (printed) + seq_printf(seq, ","); + target = ntohl(bond->params.arp_targets[i]); + seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target)); + printed = 1; + } + seq_printf(seq, "\n"); + } + if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; @@ -3478,7 +3067,10 @@ static int bond_event_changename(struct bonding *bond) bond_remove_proc_entry(bond); bond_create_proc_entry(bond); #endif - + down_write(&(bonding_rwsem)); + bond_destroy_sysfs_entry(bond); + bond_create_sysfs_entry(bond); + up_write(&(bonding_rwsem)); return NOTIFY_DONE; } @@ -3955,6 +3547,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd return -EPERM; } + down_write(&(bonding_rwsem)); slave_dev = dev_get_by_name(ifr->ifr_slave); dprintk("slave_dev=%p: \n", slave_dev); @@ -3987,6 +3580,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd dev_put(slave_dev); } + up_write(&(bonding_rwsem)); return res; } @@ -4071,6 +3665,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu) bond_for_each_slave(bond, slave, i) { dprintk("s %p s->p %p c_m %p\n", slave, slave->prev, slave->dev->change_mtu); + res = dev_set_mtu(slave->dev, new_mtu); if (res) { @@ -4397,8 +3992,9 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev) struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); if (!skb2) { printk(KERN_ERR DRV_NAME - ": Error: bond_xmit_broadcast(): " - "skb_clone() failed\n"); + ": %s: Error: bond_xmit_broadcast(): " + "skb_clone() failed\n", + bond_dev->name); continue; } @@ -4431,7 +4027,7 @@ out: /* * set bond mode specific net device operations */ -static inline void bond_set_mode_ops(struct bonding *bond, int mode) +void bond_set_mode_ops(struct bonding *bond, int mode) { struct net_device *bond_dev = bond->dev; @@ -4467,7 +4063,8 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode) default: /* Should never happen, mode already checked */ printk(KERN_ERR DRV_NAME - ": Error: Unknown bonding mode %d\n", + ": %s: Error: Unknown bonding mode %d\n", + bond_dev->name, mode); break; } @@ -4491,7 +4088,7 @@ static struct ethtool_ops bond_ethtool_ops = { * Does not allocate but creates a /proc entry. * Allowed to fail. */ -static int __init bond_init(struct net_device *bond_dev, struct bond_params *params) +static int bond_init(struct net_device *bond_dev, struct bond_params *params) { struct bonding *bond = bond_dev->priv; @@ -4565,7 +4162,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par /* De-initialize device specific data. * Caller must hold rtnl_lock. */ -static inline void bond_deinit(struct net_device *bond_dev) +void bond_deinit(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; @@ -4601,7 +4198,7 @@ static void bond_free_all(void) * Convert string input module parms. Accept either the * number of the mode or its string name. */ -static inline int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl) +int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl) { int i; @@ -4670,7 +4267,7 @@ static int bond_check_params(struct bond_params *params) if (max_bonds < 1 || max_bonds > INT_MAX) { printk(KERN_WARNING DRV_NAME ": Warning: max_bonds (%d) not in range %d-%d, so it " - "was reset to BOND_DEFAULT_MAX_BONDS (%d)", + "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS); max_bonds = BOND_DEFAULT_MAX_BONDS; } @@ -4881,81 +4478,96 @@ static int bond_check_params(struct bond_params *params) return 0; } +/* Create a new bond based on the specified name and bonding parameters. + * Caller must NOT hold rtnl_lock; we need to release it here before we + * set up our sysfs entries. + */ +int bond_create(char *name, struct bond_params *params, struct bonding **newbond) +{ + struct net_device *bond_dev; + int res; + + rtnl_lock(); + bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup); + if (!bond_dev) { + printk(KERN_ERR DRV_NAME + ": %s: eek! can't alloc netdev!\n", + name); + res = -ENOMEM; + goto out_rtnl; + } + + /* bond_init() must be called after dev_alloc_name() (for the + * /proc files), but before register_netdevice(), because we + * need to set function pointers. + */ + + res = bond_init(bond_dev, params); + if (res < 0) { + goto out_netdev; + } + + SET_MODULE_OWNER(bond_dev); + + res = register_netdevice(bond_dev); + if (res < 0) { + goto out_bond; + } + if (newbond) + *newbond = bond_dev->priv; + + rtnl_unlock(); /* allows sysfs registration of net device */ + res = bond_create_sysfs_entry(bond_dev->priv); + goto done; +out_bond: + bond_deinit(bond_dev); +out_netdev: + free_netdev(bond_dev); +out_rtnl: + rtnl_unlock(); +done: + return res; +} + static int __init bonding_init(void) { - struct bond_params params; int i; int res; + char new_bond_name[8]; /* Enough room for 999 bonds at init. */ printk(KERN_INFO "%s", version); - res = bond_check_params(¶ms); + res = bond_check_params(&bonding_defaults); if (res) { - return res; + goto out; } - rtnl_lock(); - #ifdef CONFIG_PROC_FS bond_create_proc_dir(); #endif - for (i = 0; i < max_bonds; i++) { - struct net_device *bond_dev; - - bond_dev = alloc_netdev(sizeof(struct bonding), "", ether_setup); - if (!bond_dev) { - res = -ENOMEM; - goto out_err; - } - - res = dev_alloc_name(bond_dev, "bond%d"); - if (res < 0) { - free_netdev(bond_dev); - goto out_err; - } - - /* bond_init() must be called after dev_alloc_name() (for the - * /proc files), but before register_netdevice(), because we - * need to set function pointers. - */ - res = bond_init(bond_dev, ¶ms); - if (res < 0) { - free_netdev(bond_dev); - goto out_err; - } - - SET_MODULE_OWNER(bond_dev); - - res = register_netdevice(bond_dev); - if (res < 0) { - bond_deinit(bond_dev); - free_netdev(bond_dev); - goto out_err; - } + sprintf(new_bond_name, "bond%d",i); + res = bond_create(new_bond_name,&bonding_defaults, NULL); + if (res) + goto err; } - rtnl_unlock(); + res = bond_create_sysfs(); + if (res) + goto err; + register_netdevice_notifier(&bond_netdev_notifier); register_inetaddr_notifier(&bond_inetaddr_notifier); - return 0; - -out_err: - /* - * rtnl_unlock() will run netdev_run_todo(), putting the - * thus-far-registered bonding devices into a state which - * unregigister_netdevice() will accept - */ - rtnl_unlock(); + goto out; +err: rtnl_lock(); - - /* free and unregister all bonds that were successfully added */ bond_free_all(); - + bond_destroy_sysfs(); rtnl_unlock(); - +out: return res; + } static void __exit bonding_exit(void) @@ -4965,6 +4577,7 @@ static void __exit bonding_exit(void) rtnl_lock(); bond_free_all(); + bond_destroy_sysfs(); rtnl_unlock(); } diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c new file mode 100644 index 000000000000..32d13da43a0b --- /dev/null +++ b/drivers/net/bonding/bond_sysfs.c @@ -0,0 +1,1358 @@ + +/* + * Copyright(c) 2004-2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/fs.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/netdevice.h> +#include <linux/inetdevice.h> +#include <linux/in.h> +#include <linux/sysfs.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/inet.h> +#include <linux/rtnetlink.h> + +/* #define BONDING_DEBUG 1 */ +#include "bonding.h" +#define to_class_dev(obj) container_of(obj,struct class_device,kobj) +#define to_net_dev(class) container_of(class, struct net_device, class_dev) +#define to_bond(cd) ((struct bonding *)(to_net_dev(cd)->priv)) + +/*---------------------------- Declarations -------------------------------*/ + + +extern struct list_head bond_dev_list; +extern struct bond_params bonding_defaults; +extern struct bond_parm_tbl bond_mode_tbl[]; +extern struct bond_parm_tbl bond_lacp_tbl[]; +extern struct bond_parm_tbl xmit_hashtype_tbl[]; + +static int expected_refcount = -1; +static struct class *netdev_class; +/*--------------------------- Data Structures -----------------------------*/ + +/* Bonding sysfs lock. Why can't we just use the subsytem lock? + * Because kobject_register tries to acquire the subsystem lock. If + * we already hold the lock (which we would if the user was creating + * a new bond through the sysfs interface), we deadlock. + * This lock is only needed when deleting a bond - we need to make sure + * that we don't collide with an ongoing ioctl. + */ + +struct rw_semaphore bonding_rwsem; + + + + +/*------------------------------ Functions --------------------------------*/ + +/* + * "show" function for the bond_masters attribute. + * The class parameter is ignored. + */ +static ssize_t bonding_show_bonds(struct class *cls, char *buffer) +{ + int res = 0; + struct bonding *bond; + + down_read(&(bonding_rwsem)); + + list_for_each_entry(bond, &bond_dev_list, bond_list) { + if (res > (PAGE_SIZE - IFNAMSIZ)) { + /* not enough space for another interface name */ + if ((PAGE_SIZE - res) > 10) + res = PAGE_SIZE - 10; + res += sprintf(buffer + res, "++more++"); + break; + } + res += sprintf(buffer + res, "%s ", + bond->dev->name); + } + res += sprintf(buffer + res, "\n"); + res++; + up_read(&(bonding_rwsem)); + return res; +} + +/* + * "store" function for the bond_masters attribute. This is what + * creates and deletes entire bonds. + * + * The class parameter is ignored. + * + */ + +static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t count) +{ + char command[IFNAMSIZ + 1] = {0, }; + char *ifname; + int res = count; + struct bonding *bond; + struct bonding *nxt; + + down_write(&(bonding_rwsem)); + sscanf(buffer, "%16s", command); /* IFNAMSIZ*/ + ifname = command + 1; + if ((strlen(command) <= 1) || + !dev_valid_name(ifname)) + goto err_no_cmd; + + if (command[0] == '+') { + + /* Check to see if the bond already exists. */ + list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) + if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) { + printk(KERN_ERR DRV_NAME + ": cannot add bond %s; it already exists\n", + ifname); + res = -EPERM; + goto out; + } + + printk(KERN_INFO DRV_NAME + ": %s is being created...\n", ifname); + if (bond_create(ifname, &bonding_defaults, &bond)) { + printk(KERN_INFO DRV_NAME + ": %s interface already exists. Bond creation failed.\n", + ifname); + res = -EPERM; + } + goto out; + } + + if (command[0] == '-') { + list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) + if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) { + rtnl_lock(); + /* check the ref count on the bond's kobject. + * If it's > expected, then there's a file open, + * and we have to fail. + */ + if (atomic_read(&bond->dev->class_dev.kobj.kref.refcount) + > expected_refcount){ + rtnl_unlock(); + printk(KERN_INFO DRV_NAME + ": Unable remove bond %s due to open references.\n", + ifname); + res = -EPERM; + goto out; + } + printk(KERN_INFO DRV_NAME + ": %s is being deleted...\n", + bond->dev->name); + unregister_netdevice(bond->dev); + bond_deinit(bond->dev); + bond_destroy_sysfs_entry(bond); + rtnl_unlock(); + goto out; + } + + printk(KERN_ERR DRV_NAME + ": unable to delete non-existent bond %s\n", ifname); + res = -ENODEV; + goto out; + } + +err_no_cmd: + printk(KERN_ERR DRV_NAME + ": no command found in bonding_masters. Use +ifname or -ifname.\n"); + res = -EPERM; + + /* Always return either count or an error. If you return 0, you'll + * get called forever, which is bad. + */ +out: + up_write(&(bonding_rwsem)); + return res; +} +/* class attribute for bond_masters file. This ends up in /sys/class/net */ +static CLASS_ATTR(bonding_masters, S_IWUSR | S_IRUGO, + bonding_show_bonds, bonding_store_bonds); + +int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave) +{ + char linkname[IFNAMSIZ+7]; + int ret = 0; + + /* first, create a link from the slave back to the master */ + ret = sysfs_create_link(&(slave->class_dev.kobj), &(master->class_dev.kobj), + "master"); + if (ret) + return ret; + /* next, create a link from the master to the slave */ + sprintf(linkname,"slave_%s",slave->name); + ret = sysfs_create_link(&(master->class_dev.kobj), &(slave->class_dev.kobj), + linkname); + return ret; + +} + +void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave) +{ + char linkname[IFNAMSIZ+7]; + + sysfs_remove_link(&(slave->class_dev.kobj), "master"); + sprintf(linkname,"slave_%s",slave->name); + sysfs_remove_link(&(master->class_dev.kobj), linkname); +} + + +/* + * Show the slaves in the current bond. + */ +static ssize_t bonding_show_slaves(struct class_device *cd, char *buf) +{ + struct slave *slave; + int i, res = 0; + struct bonding *bond = to_bond(cd); + + read_lock_bh(&bond->lock); + bond_for_each_slave(bond, slave, i) { + if (res > (PAGE_SIZE - IFNAMSIZ)) { + /* not enough space for another interface name */ + if ((PAGE_SIZE - res) > 10) + res = PAGE_SIZE - 10; + res += sprintf(buf + res, "++more++"); + break; + } + res += sprintf(buf + res, "%s ", slave->dev->name); + } + read_unlock_bh(&bond->lock); + res += sprintf(buf + res, "\n"); + res++; + return res; +} + +/* + * Set the slaves in the current bond. The bond interface must be + * up for this to succeed. + * This function is largely the same flow as bonding_update_bonds(). + */ +static ssize_t bonding_store_slaves(struct class_device *cd, const char *buffer, size_t count) +{ + char command[IFNAMSIZ + 1] = { 0, }; + char *ifname; + int i, res, found, ret = count; + struct slave *slave; + struct net_device *dev = 0; + struct bonding *bond = to_bond(cd); + + /* Quick sanity check -- is the bond interface up? */ + if (!(bond->dev->flags & IFF_UP)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update slaves because interface is down.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + /* Note: We can't hold bond->lock here, as bond_create grabs it. */ + + sscanf(buffer, "%16s", command); /* IFNAMSIZ*/ + ifname = command + 1; + if ((strlen(command) <= 1) || + !dev_valid_name(ifname)) + goto err_no_cmd; + + if (command[0] == '+') { + + /* Got a slave name in ifname. Is it already in the list? */ + found = 0; + read_lock_bh(&bond->lock); + bond_for_each_slave(bond, slave, i) + if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + printk(KERN_ERR DRV_NAME + ": %s: Interface %s is already enslaved!\n", + bond->dev->name, ifname); + ret = -EPERM; + read_unlock_bh(&bond->lock); + goto out; + } + + read_unlock_bh(&bond->lock); + printk(KERN_INFO DRV_NAME ": %s: Adding slave %s.\n", + bond->dev->name, ifname); + dev = dev_get_by_name(ifname); + if (!dev) { + printk(KERN_INFO DRV_NAME + ": %s: Interface %s does not exist!\n", + bond->dev->name, ifname); + ret = -EPERM; + goto out; + } + else + dev_put(dev); + + if (dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": %s: Error: Unable to enslave %s " + "because it is already up.\n", + bond->dev->name, dev->name); + ret = -EPERM; + goto out; + } + /* If this is the first slave, then we need to set + the master's hardware address to be the same as the + slave's. */ + if (!(*((u32 *) & (bond->dev->dev_addr[0])))) { + memcpy(bond->dev->dev_addr, dev->dev_addr, + dev->addr_len); + } + + /* Set the slave's MTU to match the bond */ + if (dev->mtu != bond->dev->mtu) { + if (dev->change_mtu) { + res = dev->change_mtu(dev, + bond->dev->mtu); + if (res) { + ret = res; + goto out; + } + } else { + dev->mtu = bond->dev->mtu; + } + } + rtnl_lock(); + res = bond_enslave(bond->dev, dev); + rtnl_unlock(); + if (res) { + ret = res; + } + goto out; + } + + if (command[0] == '-') { + dev = NULL; + bond_for_each_slave(bond, slave, i) + if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + dev = slave->dev; + break; + } + if (dev) { + printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n", + bond->dev->name, dev->name); + rtnl_lock(); + res = bond_release(bond->dev, dev); + rtnl_unlock(); + if (res) { + ret = res; + goto out; + } + /* set the slave MTU to the default */ + if (dev->change_mtu) { + dev->change_mtu(dev, 1500); + } else { + dev->mtu = 1500; + } + } + else { + printk(KERN_ERR DRV_NAME ": unable to remove non-existent slave %s for bond %s.\n", + ifname, bond->dev->name); + ret = -ENODEV; + } + goto out; + } + +err_no_cmd: + printk(KERN_ERR DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name); + ret = -EPERM; + +out: + return ret; +} + +static CLASS_DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves); + +/* + * Show and set the bonding mode. The bond interface must be down to + * change the mode. + */ +static ssize_t bonding_show_mode(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%s %d\n", + bond_mode_tbl[bond->params.mode].modename, + bond->params.mode) + 1; +} + +static ssize_t bonding_store_mode(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": unable to update mode of %s because interface is up.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, bond_mode_tbl); + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid mode value %.*s.\n", + bond->dev->name, + (int)strlen(buf) - 1, buf); + ret = -EINVAL; + goto out; + } else { + bond->params.mode = new_value; + bond_set_mode_ops(bond, bond->params.mode); + printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n", + bond->dev->name, bond_mode_tbl[new_value].modename, new_value); + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode); + +/* + * Show and set the bonding transmit hash method. The bond interface must be down to + * change the xmit hash policy. + */ +static ssize_t bonding_show_xmit_hash(struct class_device *cd, char *buf) +{ + int count; + struct bonding *bond = to_bond(cd); + + if ((bond->params.mode != BOND_MODE_XOR) && + (bond->params.mode != BOND_MODE_8023AD)) { + // Not Applicable + count = sprintf(buf, "NA\n") + 1; + } else { + count = sprintf(buf, "%s %d\n", + xmit_hashtype_tbl[bond->params.xmit_policy].modename, + bond->params.xmit_policy) + 1; + } + + return count; +} + +static ssize_t bonding_store_xmit_hash(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + "%s: Interface is up. Unable to update xmit policy.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if ((bond->params.mode != BOND_MODE_XOR) && + (bond->params.mode != BOND_MODE_8023AD)) { + printk(KERN_ERR DRV_NAME + "%s: Transmit hash policy is irrelevant in this mode.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, xmit_hashtype_tbl); + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid xmit hash policy value %.*s.\n", + bond->dev->name, + (int)strlen(buf) - 1, buf); + ret = -EINVAL; + goto out; + } else { + bond->params.xmit_policy = new_value; + bond_set_mode_ops(bond, bond->params.mode); + printk(KERN_INFO DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n", + bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value); + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash); + +/* + * Show and set the arp timer interval. There are two tricky bits + * here. First, if ARP monitoring is activated, then we must disable + * MII monitoring. Second, if the ARP timer isn't running, we must + * start it. + */ +static ssize_t bonding_show_arp_interval(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.arp_interval) + 1; +} + +static ssize_t bonding_store_arp_interval(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no arp_interval value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n", + bond->dev->name, new_value, INT_MAX); + ret = -EINVAL; + goto out; + } + + printk(KERN_INFO DRV_NAME + ": %s: Setting ARP monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.arp_interval = new_value; + if (bond->params.miimon) { + printk(KERN_INFO DRV_NAME + ": %s: ARP monitoring cannot be used with MII monitoring. " + "%s Disabling MII monitoring.\n", + bond->dev->name, bond->dev->name); + bond->params.miimon = 0; + /* Kill MII timer, else it brings bond's link down */ + if (bond->arp_timer.function) { + printk(KERN_INFO DRV_NAME + ": %s: Kill MII timer, else it brings bond's link down...\n", + bond->dev->name); + del_timer_sync(&bond->mii_timer); + } + } + if (!bond->params.arp_targets[0]) { + printk(KERN_INFO DRV_NAME + ": %s: ARP monitoring has been set up, " + "but no ARP targets have been specified.\n", + bond->dev->name); + } + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the ARP timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (bond->arp_timer.function) { + /* The timer's already set up, so fire it off */ + mod_timer(&bond->arp_timer, jiffies + 1); + } else { + /* Set up the timer. */ + init_timer(&bond->arp_timer); + bond->arp_timer.expires = jiffies + 1; + bond->arp_timer.data = + (unsigned long) bond->dev; + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { + bond->arp_timer.function = + (void *) + &bond_activebackup_arp_mon; + } else { + bond->arp_timer.function = + (void *) + &bond_loadbalance_arp_mon; + } + add_timer(&bond->arp_timer); + } + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval); + +/* + * Show and set the arp targets. + */ +static ssize_t bonding_show_arp_targets(struct class_device *cd, char *buf) +{ + int i, res = 0; + struct bonding *bond = to_bond(cd); + + for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) { + if (bond->params.arp_targets[i]) + res += sprintf(buf + res, "%u.%u.%u.%u ", + NIPQUAD(bond->params.arp_targets[i])); + } + if (res) + res--; /* eat the leftover space */ + res += sprintf(buf + res, "\n"); + res++; + return res; +} + +static ssize_t bonding_store_arp_targets(struct class_device *cd, const char *buf, size_t count) +{ + u32 newtarget; + int i = 0, done = 0, ret = count; + struct bonding *bond = to_bond(cd); + u32 *targets; + + targets = bond->params.arp_targets; + newtarget = in_aton(buf + 1); + /* look for adds */ + if (buf[0] == '+') { + if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) { + printk(KERN_ERR DRV_NAME + ": %s: invalid ARP target %u.%u.%u.%u specified for addition\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + /* look for an empty slot to put the target in, and check for dupes */ + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (targets[i] == newtarget) { /* duplicate */ + printk(KERN_ERR DRV_NAME + ": %s: ARP target %u.%u.%u.%u is already present\n", + bond->dev->name, NIPQUAD(newtarget)); + if (done) + targets[i] = 0; + ret = -EINVAL; + goto out; + } + if (targets[i] == 0 && !done) { + printk(KERN_INFO DRV_NAME + ": %s: adding ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + done = 1; + targets[i] = newtarget; + } + } + if (!done) { + printk(KERN_ERR DRV_NAME + ": %s: ARP target table is full!\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + + } + else if (buf[0] == '-') { + if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) { + printk(KERN_ERR DRV_NAME + ": %s: invalid ARP target %d.%d.%d.%d specified for removal\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (targets[i] == newtarget) { + printk(KERN_INFO DRV_NAME + ": %s: removing ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + targets[i] = 0; + done = 1; + } + } + if (!done) { + printk(KERN_INFO DRV_NAME + ": %s: unable to remove nonexistent ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + } + else { + printk(KERN_ERR DRV_NAME ": no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets); + +/* + * Show and set the up and down delays. These must be multiples of the + * MII monitoring value, and are stored internally as the multiplier. + * Thus, we must translate to MS for the real world. + */ +static ssize_t bonding_show_downdelay(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon) + 1; +} + +static ssize_t bonding_store_downdelay(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (!(bond->params.miimon)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to set down delay as MII monitoring is disabled\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no down delay value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + if ((new_value % bond->params.miimon) != 0) { + printk(KERN_WARNING DRV_NAME + ": %s: Warning: down delay (%d) is not a multiple " + "of miimon (%d), delay rounded to %d ms\n", + bond->dev->name, new_value, bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); + } + bond->params.downdelay = new_value / bond->params.miimon; + printk(KERN_INFO DRV_NAME ": %s: Setting down delay to %d.\n", + bond->dev->name, bond->params.downdelay * bond->params.miimon); + + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay); + +static ssize_t bonding_show_updelay(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon) + 1; + +} + +static ssize_t bonding_store_updelay(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (!(bond->params.miimon)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to set up delay as MII monitoring is disabled\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no up delay value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + if ((new_value % bond->params.miimon) != 0) { + printk(KERN_WARNING DRV_NAME + ": %s: Warning: up delay (%d) is not a multiple " + "of miimon (%d), updelay rounded to %d ms\n", + bond->dev->name, new_value, bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); + } + bond->params.updelay = new_value / bond->params.miimon; + printk(KERN_INFO DRV_NAME ": %s: Setting up delay to %d.\n", + bond->dev->name, bond->params.updelay * bond->params.miimon); + + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay); + +/* + * Show and set the LACP interval. Interface must be down, and the mode + * must be set to 802.3ad mode. + */ +static ssize_t bonding_show_lacp(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%s %d\n", + bond_lacp_tbl[bond->params.lacp_fast].modename, + bond->params.lacp_fast) + 1; +} + +static ssize_t bonding_store_lacp(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update LACP rate because interface is up.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (bond->params.mode != BOND_MODE_8023AD) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, bond_lacp_tbl); + + if ((new_value == 1) || (new_value == 0)) { + bond->params.lacp_fast = new_value; + printk(KERN_INFO DRV_NAME + ": %s: Setting LACP rate to %s (%d).\n", + bond->dev->name, bond_lacp_tbl[new_value].modename, new_value); + } else { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid LACP rate value %.*s.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + ret = -EINVAL; + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp); + +/* + * Show and set the MII monitor interval. There are two tricky bits + * here. First, if MII monitoring is activated, then we must disable + * ARP monitoring. Second, if the timer isn't running, we must + * start it. + */ +static ssize_t bonding_show_miimon(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.miimon) + 1; +} + +static ssize_t bonding_store_miimon(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no miimon value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + printk(KERN_INFO DRV_NAME + ": %s: Setting MII monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.miimon = new_value; + if(bond->params.updelay) + printk(KERN_INFO DRV_NAME + ": %s: Note: Updating updelay (to %d) " + "since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.updelay * bond->params.miimon); + if(bond->params.downdelay) + printk(KERN_INFO DRV_NAME + ": %s: Note: Updating downdelay (to %d) " + "since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.downdelay * bond->params.miimon); + if (bond->params.arp_interval) { + printk(KERN_INFO DRV_NAME + ": %s: MII monitoring cannot be used with " + "ARP monitoring. Disabling ARP monitoring...\n", + bond->dev->name); + bond->params.arp_interval = 0; + /* Kill ARP timer, else it brings bond's link down */ + if (bond->mii_timer.function) { + printk(KERN_INFO DRV_NAME + ": %s: Kill ARP timer, else it brings bond's link down...\n", + bond->dev->name); + del_timer_sync(&bond->arp_timer); + } + } + + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the MII timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (bond->mii_timer.function) { + /* The timer's already set up, so fire it off */ + mod_timer(&bond->mii_timer, jiffies + 1); + } else { + /* Set up the timer. */ + init_timer(&bond->mii_timer); + bond->mii_timer.expires = jiffies + 1; + bond->mii_timer.data = + (unsigned long) bond->dev; + bond->mii_timer.function = + (void *) &bond_mii_monitor; + add_timer(&bond->mii_timer); + } + } + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon); + +/* + * Show and set the primary slave. The store function is much + * simpler than bonding_store_slaves function because it only needs to + * handle one interface name. + * The bond must be a mode that supports a primary for this be + * set. + */ +static ssize_t bonding_show_primary(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->primary_slave) + count = sprintf(buf, "%s\n", bond->primary_slave->dev->name) + 1; + else + count = sprintf(buf, "\n") + 1; + + return count; +} + +static ssize_t bonding_store_primary(struct class_device *cd, const char *buf, size_t count) +{ + int i; + struct slave *slave; + struct bonding *bond = to_bond(cd); + + write_lock_bh(&bond->lock); + if (!USES_PRIMARY(bond->params.mode)) { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set primary slave; %s is in mode %d\n", + bond->dev->name, bond->dev->name, bond->params.mode); + } else { + bond_for_each_slave(bond, slave, i) { + if (strnicmp + (slave->dev->name, buf, + strlen(slave->dev->name)) == 0) { + printk(KERN_INFO DRV_NAME + ": %s: Setting %s as primary slave.\n", + bond->dev->name, slave->dev->name); + bond->primary_slave = slave; + bond_select_active_slave(bond); + goto out; + } + } + + /* if we got here, then we didn't match the name of any slave */ + + if (strlen(buf) == 0 || buf[0] == '\n') { + printk(KERN_INFO DRV_NAME + ": %s: Setting primary slave to None.\n", + bond->dev->name); + bond->primary_slave = 0; + bond_select_active_slave(bond); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set %.*s as primary slave as it is not a slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + } + } +out: + write_unlock_bh(&bond->lock); + return count; +} +static CLASS_DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary); + +/* + * Show and set the use_carrier flag. + */ +static ssize_t bonding_show_carrier(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.use_carrier) + 1; +} + +static ssize_t bonding_store_carrier(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no use_carrier value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if ((new_value == 0) || (new_value == 1)) { + bond->params.use_carrier = new_value; + printk(KERN_INFO DRV_NAME ": %s: Setting use_carrier to %d.\n", + bond->dev->name, new_value); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Ignoring invalid use_carrier value %d.\n", + bond->dev->name, new_value); + } +out: + return count; +} +static CLASS_DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier); + + +/* + * Show and set currently active_slave. + */ +static ssize_t bonding_show_active_slave(struct class_device *cd, char *buf) +{ + struct slave *curr; + struct bonding *bond = to_bond(cd); + int count; + + + read_lock(&bond->curr_slave_lock); + curr = bond->curr_active_slave; + read_unlock(&bond->curr_slave_lock); + + if (USES_PRIMARY(bond->params.mode) && curr) + count = sprintf(buf, "%s\n", curr->dev->name) + 1; + else + count = sprintf(buf, "\n") + 1; + return count; +} + +static ssize_t bonding_store_active_slave(struct class_device *cd, const char *buf, size_t count) +{ + int i; + struct slave *slave; + struct slave *old_active = NULL; + struct slave *new_active = NULL; + struct bonding *bond = to_bond(cd); + + write_lock_bh(&bond->lock); + if (!USES_PRIMARY(bond->params.mode)) { + printk(KERN_INFO DRV_NAME + ": %s: Unable to change active slave; %s is in mode %d\n", + bond->dev->name, bond->dev->name, bond->params.mode); + } else { + bond_for_each_slave(bond, slave, i) { + if (strnicmp + (slave->dev->name, buf, + strlen(slave->dev->name)) == 0) { + old_active = bond->curr_active_slave; + new_active = slave; + if (new_active && (new_active == old_active)) { + /* do nothing */ + printk(KERN_INFO DRV_NAME + ": %s: %s is already the current active slave.\n", + bond->dev->name, slave->dev->name); + goto out; + } + else { + if ((new_active) && + (old_active) && + (new_active->link == BOND_LINK_UP) && + IS_UP(new_active->dev)) { + printk(KERN_INFO DRV_NAME + ": %s: Setting %s as active slave.\n", + bond->dev->name, slave->dev->name); + bond_change_active_slave(bond, new_active); + } + else { + printk(KERN_INFO DRV_NAME + ": %s: Could not set %s as active slave; " + "either %s is down or the link is down.\n", + bond->dev->name, slave->dev->name, + slave->dev->name); + } + goto out; + } + } + } + + /* if we got here, then we didn't match the name of any slave */ + + if (strlen(buf) == 0 || buf[0] == '\n') { + printk(KERN_INFO DRV_NAME + ": %s: Setting active slave to None.\n", + bond->dev->name); + bond->primary_slave = 0; + bond_select_active_slave(bond); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set %.*s as active slave as it is not a slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + } + } +out: + write_unlock_bh(&bond->lock); + return count; + +} +static CLASS_DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave); + + +/* + * Show link status of the bond interface. + */ +static ssize_t bonding_show_mii_status(struct class_device *cd, char *buf) +{ + struct slave *curr; + struct bonding *bond = to_bond(cd); + + read_lock(&bond->curr_slave_lock); + curr = bond->curr_active_slave; + read_unlock(&bond->curr_slave_lock); + + return sprintf(buf, "%s\n", (curr) ? "up" : "down") + 1; +} +static CLASS_DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL); + + +/* + * Show current 802.3ad aggregator ID. + */ +static ssize_t bonding_show_ad_aggregator(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.aggregator_id) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL); + + +/* + * Show number of active 802.3ad ports. + */ +static ssize_t bonding_show_ad_num_ports(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0: ad_info.ports) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL); + + +/* + * Show current 802.3ad actor key. + */ +static ssize_t bonding_show_ad_actor_key(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.actor_key) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL); + + +/* + * Show current 802.3ad partner key. + */ +static ssize_t bonding_show_ad_partner_key(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.partner_key) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL); + + +/* + * Show current 802.3ad partner mac. + */ +static ssize_t bonding_show_ad_partner_mac(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + if (!bond_3ad_get_active_agg_info(bond, &ad_info)) { + count = sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x\n", + ad_info.partner_system[0], + ad_info.partner_system[1], + ad_info.partner_system[2], + ad_info.partner_system[3], + ad_info.partner_system[4], + ad_info.partner_system[5]) + 1; + } + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL); + + + +static struct attribute *per_bond_attrs[] = { + &class_device_attr_slaves.attr, + &class_device_attr_mode.attr, + &class_device_attr_arp_interval.attr, + &class_device_attr_arp_ip_target.attr, + &class_device_attr_downdelay.attr, + &class_device_attr_updelay.attr, + &class_device_attr_lacp_rate.attr, + &class_device_attr_xmit_hash_policy.attr, + &class_device_attr_miimon.attr, + &class_device_attr_primary.attr, + &class_device_attr_use_carrier.attr, + &class_device_attr_active_slave.attr, + &class_device_attr_mii_status.attr, + &class_device_attr_ad_aggregator.attr, + &class_device_attr_ad_num_ports.attr, + &class_device_attr_ad_actor_key.attr, + &class_device_attr_ad_partner_key.attr, + &class_device_attr_ad_partner_mac.attr, + NULL, +}; + +static struct attribute_group bonding_group = { + .name = "bonding", + .attrs = per_bond_attrs, +}; + +/* + * Initialize sysfs. This sets up the bonding_masters file in + * /sys/class/net. + */ +int bond_create_sysfs(void) +{ + int ret = 0; + struct bonding *firstbond; + + init_rwsem(&bonding_rwsem); + + /* get the netdev class pointer */ + firstbond = container_of(bond_dev_list.next, struct bonding, bond_list); + if (!firstbond) + return -ENODEV; + + netdev_class = firstbond->dev->class_dev.class; + if (!netdev_class) + return -ENODEV; + + ret = class_create_file(netdev_class, &class_attr_bonding_masters); + + return ret; + +} + +/* + * Remove /sys/class/net/bonding_masters. + */ +void bond_destroy_sysfs(void) +{ + if (netdev_class) + class_remove_file(netdev_class, &class_attr_bonding_masters); +} + +/* + * Initialize sysfs for each bond. This sets up and registers + * the 'bondctl' directory for each individual bond under /sys/class/net. + */ +int bond_create_sysfs_entry(struct bonding *bond) +{ + struct net_device *dev = bond->dev; + int err; + + err = sysfs_create_group(&(dev->class_dev.kobj), &bonding_group); + if (err) { + printk(KERN_EMERG "eek! didn't create group!\n"); + } + + if (expected_refcount < 1) + expected_refcount = atomic_read(&bond->dev->class_dev.kobj.kref.refcount); + + return err; +} +/* + * Remove sysfs entries for each bond. + */ +void bond_destroy_sysfs_entry(struct bonding *bond) +{ + struct net_device *dev = bond->dev; + + sysfs_remove_group(&(dev->class_dev.kobj), &bonding_group); +} + diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 1433e91db0f7..015c7f1d1bc0 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -10,25 +10,6 @@ * This software may be used and distributed according to the terms * of the GNU Public License, incorporated herein by reference. * - * - * 2003/03/18 - Amir Noam <amir.noam at intel dot com>, - * Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Shmulik Hen <shmulik.hen at intel dot com> - * - Added support for IEEE 802.3ad Dynamic link aggregation mode. - * - * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and - * Amir Noam <amir.noam at intel dot com> - * - Code beautification and style changes (mainly in comments). - * - * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Added support for Transmit load balancing mode. - * - * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> - * - Code cleanup and style changes - * - * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov> - * - added "xmit_policy" kernel parameter for alternate hashing policy - * support for mode 2 */ #ifndef _LINUX_BONDING_H @@ -37,11 +18,12 @@ #include <linux/timer.h> #include <linux/proc_fs.h> #include <linux/if_bonding.h> +#include <linux/kobject.h> #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "2.6.5" -#define DRV_RELDATE "November 4, 2005" +#define DRV_VERSION "3.0.0" +#define DRV_RELDATE "November 8, 2005" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" @@ -152,6 +134,11 @@ struct bond_params { u32 arp_targets[BOND_MAX_ARP_TARGETS]; }; +struct bond_parm_tbl { + char *modename; + int mode; +}; + struct vlan_entry { struct list_head vlan_list; u32 vlan_ip; @@ -159,7 +146,7 @@ struct vlan_entry { }; struct slave { - struct net_device *dev; /* first - usefull for panic debug */ + struct net_device *dev; /* first - useful for panic debug */ struct slave *next; struct slave *prev; s16 delay; @@ -185,7 +172,7 @@ struct slave { * beforehand. */ struct bonding { - struct net_device *dev; /* first - usefull for panic debug */ + struct net_device *dev; /* first - useful for panic debug */ struct slave *first_slave; struct slave *curr_active_slave; struct slave *current_arp_slave; @@ -255,6 +242,25 @@ extern inline void bond_set_slave_active_flags(struct slave *slave) struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr); int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev); +int bond_create(char *name, struct bond_params *params, struct bonding **newbond); +void bond_deinit(struct net_device *bond_dev); +int bond_create_sysfs(void); +void bond_destroy_sysfs(void); +void bond_destroy_sysfs_entry(struct bonding *bond); +int bond_create_sysfs_entry(struct bonding *bond); +int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave); +void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave); +int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev); +int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); +int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev); +void bond_mii_monitor(struct net_device *bond_dev); +void bond_loadbalance_arp_mon(struct net_device *bond_dev); +void bond_activebackup_arp_mon(struct net_device *bond_dev); +void bond_set_mode_ops(struct bonding *bond, int mode); +int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl); +const char *bond_mode_name(int mode); +void bond_select_active_slave(struct bonding *bond); +void bond_change_active_slave(struct bonding *bond, struct slave *new_active); #endif /* _LINUX_BONDING_H */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 53b41d99b00b..2c5b849b7ba4 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1332,8 +1332,8 @@ intr_handler_t t1_select_intr_handler(adapter_t *adapter) * * This runs with softirqs disabled. */ -unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid, struct net_device *dev) +static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) { struct sge *sge = adapter->sge; struct cmdQ *q = &sge->cmdQ[qid]; @@ -1352,9 +1352,10 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, set_bit(dev->if_port, &sge->stopped_tx_queues); sge->stats.cmdQ_full[3]++; spin_unlock(&q->lock); - CH_ERR("%s: Tx ring full while queue awake!\n", - adapter->name); - return 1; + if (!netif_queue_stopped(dev)) + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return NETDEV_TX_BUSY; } if (unlikely(credits - count < q->stop_thres)) { sge->stats.cmdQ_full[3]++; @@ -1389,7 +1390,7 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); } } - return 0; + return NETDEV_TX_OK; } #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) @@ -1449,7 +1450,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(skb->len < ETH_HLEN || skb->len > dev->mtu + eth_hdr_len(skb->data))) { dev_kfree_skb_any(skb); - return NET_XMIT_SUCCESS; + return NETDEV_TX_OK; } /* @@ -1467,7 +1468,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb = skb_realloc_headroom(skb, sizeof(*cpl)); dev_kfree_skb_any(orig_skb); if (!skb) - return -ENOMEM; + return NETDEV_TX_OK; } if (!(adapter->flags & UDP_CSUM_CAPABLE) && @@ -1475,7 +1476,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->nh.iph->protocol == IPPROTO_UDP) if (unlikely(skb_checksum_help(skb, 0))) { dev_kfree_skb_any(skb); - return -ENOMEM; + return NETDEV_TX_OK; } /* Hmmm, assuming to catch the gratious arp... and we'll use diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 434b25586851..6d0d24a6364f 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -89,8 +89,6 @@ int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); intr_handler_t t1_select_intr_handler(adapter_t *adapter); -unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid, struct net_device *netdev); int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 3f653a93e1bc..e02e9ba2e18b 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -188,11 +188,13 @@ struct e1000_tx_ring { /* array of buffer information structs */ struct e1000_buffer *buffer_info; - struct e1000_buffer previous_buffer_info; spinlock_t tx_lock; uint16_t tdh; uint16_t tdt; uint64_t pkt; + + boolean_t last_tx_tso; + }; struct e1000_rx_ring { diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8eae8ba27e84..c88f1a3c1b1d 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + uint16_t eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); + + /* EEPROM image version # is reported as firware version # for + * 8257{1|2|3} controllers */ + e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); + switch (adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + case e1000_82573: + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + break; + default: + sprintf(firmware_version, "n/a"); + } + + strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->n_stats = E1000_STATS_LEN; drvinfo->testinfo_len = E1000_TEST_LEN; @@ -960,13 +979,21 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) } } - if(txdr->desc) + if(txdr->desc) { pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma); - if(rxdr->desc) + txdr->desc = NULL; + } + if(rxdr->desc) { pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); + rxdr->desc = NULL; + } kfree(txdr->buffer_info); + txdr->buffer_info = NULL; + kfree(rxdr->buffer_info); + rxdr->buffer_info = NULL; + return; } @@ -1301,21 +1328,32 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { uint32_t rctl; + struct e1000_hw *hw = &adapter->hw; - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { - if(adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac_type) { + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); - else { - rctl = E1000_READ_REG(&adapter->hw, RCTL); + break; + case e1000_82571: + case e1000_82572: +#define E1000_SERDES_LB_ON 0x410 + e1000_set_phy_loopback(adapter); + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); + msec_delay(10); + return 0; + break; + default: + rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); return 0; } - } else if(adapter->hw.media_type == e1000_media_type_copper) + } else if (hw->media_type == e1000_media_type_copper) return e1000_set_phy_loopback(adapter); return 7; @@ -1326,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) { uint32_t rctl; uint16_t phy_reg; + struct e1000_hw *hw = &adapter->hw; rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if(adapter->hw.media_type == e1000_media_type_copper || - ((adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) && - (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3))) { - adapter->hw.autoneg = TRUE; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg & MII_CR_LOOPBACK) { + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes){ +#define E1000_SERDES_LB_OFF 0x400 + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); + msec_delay(10); + break; + } + /* fall thru for Cu adapters */ + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + default: + hw->autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); - e1000_phy_reset(&adapter->hw); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + e1000_phy_reset(hw); } + break; } } @@ -1440,9 +1489,11 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data) { if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback; - if((*data = e1000_setup_loopback_test(adapter))) goto err_loopback; + if((*data = e1000_setup_loopback_test(adapter))) + goto err_loopback_setup; *data = e1000_run_loopback_test(adapter); e1000_loopback_cleanup(adapter); +err_loopback_setup: e1000_free_desc_rings(adapter); err_loopback: return *data; @@ -1671,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); } + else if(adapter->hw.mac_type < e1000_82573) { + E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); + msleep_interruptible(data * 1000); + } else { E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index a267c5235fc0..136fc031e4ad 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -563,11 +563,13 @@ e1000_reset_hw(struct e1000_hw *hw) msec_delay(20); break; case e1000_82573: - udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + } /* fall through */ case e1000_82571: case e1000_82572: @@ -844,19 +846,27 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - - if(hw->fc == e1000_fc_default) { - if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; - else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == - EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; - else + if (hw->fc == e1000_fc_default) { + switch (hw->mac_type) { + case e1000_82573: hw->fc = e1000_fc_full; + break; + default: + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) + hw->fc = e1000_fc_none; + else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == + EEPROM_WORD0F_ASM_DIR) + hw->fc = e1000_fc_tx_pause; + else + hw->fc = e1000_fc_full; + break; + } } /* We want to save off the original Flow Control configuration just @@ -2962,13 +2972,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if(hw->mac_type > e1000_82543) { /* Read the device control register and assert the E1000_CTRL_PHY_RST * bit. Then, take it out of reset. + * For pre-e1000_82571 hardware, we delay for 10ms between the assert + * and deassert. For e1000_82571 hardware and later, we instead delay + * for 10ms after the deassertion. */ ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST); E1000_WRITE_FLUSH(hw); - msec_delay(10); + + if (hw->mac_type < e1000_82571) + msec_delay(10); + E1000_WRITE_REG(hw, CTRL, ctrl); E1000_WRITE_FLUSH(hw); + + if (hw->mac_type >= e1000_82571) + msec_delay(10); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR * bit to put the PHY into reset. Then, take it out of reset. @@ -5278,11 +5297,15 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; - case e1000_82571: case e1000_82572: case e1000_82573: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_1; + break; + case e1000_82571: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; hw->bus_width = e1000_bus_width_pciex_4; break; default: @@ -6650,6 +6673,12 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) break; } + /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high. + * Need to wait for PHY configuration completion before accessing NVM + * and PHY. */ + if (hw->mac_type == e1000_82573) + msec_delay(25); + return E1000_SUCCESS; } diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 76ce12809a11..7caa35748cea 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -123,6 +123,7 @@ typedef enum { e1000_bus_width_32, e1000_bus_width_64, e1000_bus_width_pciex_1, + e1000_bus_width_pciex_2, e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -149,6 +150,7 @@ typedef enum { e1000_igp_cable_length_90 = 90, e1000_igp_cable_length_100 = 100, e1000_igp_cable_length_110 = 110, + e1000_igp_cable_length_115 = 115, e1000_igp_cable_length_120 = 120, e1000_igp_cable_length_130 = 130, e1000_igp_cable_length_140 = 140, @@ -1457,6 +1459,7 @@ struct e1000_hw { #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SECVAL_SHIFT 22 #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 @@ -1951,7 +1954,6 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 -#define E1000_GCR_BEM32 0x00400000 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index e0ae248b4313..438a931fd55d 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -711,6 +711,7 @@ e1000_probe(struct pci_dev *pdev, break; case e1000_82546: case e1000_82546_rev_3: + case e1000_82571: if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1) && (adapter->hw.media_type == e1000_media_type_copper)) { e1000_read_eeprom(&adapter->hw, @@ -1158,7 +1159,6 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, return -ENOMEM; } memset(txdr->buffer_info, 0, size); - memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer)); /* round up to nearest 4K */ @@ -1813,11 +1813,6 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, /* Free all the Tx ring sk_buffs */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(i = 0; i < tx_ring->count; i++) { buffer_info = &tx_ring->buffer_info[i]; e1000_unmap_and_free_tx_resource(adapter, buffer_info); @@ -1832,6 +1827,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; + tx_ring->last_tx_tso = 0; writel(0, adapter->hw.hw_addr + tx_ring->tdh); writel(0, adapter->hw.hw_addr + tx_ring->tdt); @@ -2437,6 +2433,16 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); #ifdef NETIF_F_TSO + /* Workaround for Controller erratum -- + * descriptor for non-tso packet in a linear SKB that follows a + * tso gets written back prematurely before the data is fully + * DMAd to the controller */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) { + tx_ring->last_tx_tso = 0; + size -= 4; + } + /* Workaround for premature desc write-backs * in TSO mode. Append 4-byte sentinel desc */ if(unlikely(mss && !nr_frags && size == len && size > 8)) @@ -2693,6 +2699,14 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(skb->ip_summed == CHECKSUM_HW) count++; #endif + +#ifdef NETIF_F_TSO + /* Controller Erratum workaround */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) + count++; +#endif + count += TXD_USE_COUNT(len, max_txd_pwr); if(adapter->pcix_82544) @@ -2774,9 +2788,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_OK; } - if (likely(tso)) + if (likely(tso)) { + tx_ring->last_tx_tso = 1; tx_flags |= E1000_TX_FLAGS_TSO; - else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) + } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. @@ -3227,37 +3242,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, eop_desc = E1000_TX_DESC(*tx_ring, eop); while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* Premature writeback of Tx descriptors clear (free buffers - * and unmap pci_mapping) previous_buffer_info */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(cleaned = FALSE; !cleaned; ) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); -#ifdef NETIF_F_TSO - if (!(netdev->features & NETIF_F_TSO)) { -#endif - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); -#ifdef NETIF_F_TSO - } else { - if (cleaned) { - memcpy(&tx_ring->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, 0, - sizeof(struct e1000_buffer)); - } else { - e1000_unmap_and_free_tx_resource( - adapter, buffer_info); - } - } -#endif + e1000_unmap_and_free_tx_resource(adapter, buffer_info); tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; @@ -3318,12 +3308,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } -#ifdef NETIF_F_TSO - if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && - time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) - e1000_unmap_and_free_tx_resource( - adapter, &tx_ring->previous_buffer_info); -#endif return cleaned; } diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 0f030b73cbb3..146f9513aea5 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2,7 +2,8 @@ * drivers/net/gianfar.c * * Gianfar Ethernet Driver - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 + * This driver is designed for the non-CPM ethernet controllers + * on the 85xx and 83xx family of integrated processors * Based on 8260_io/fcc_enet.c * * Author: Andy Fleming @@ -22,8 +23,6 @@ * B-V +1.62 * * Theory of operation - * This driver is designed for the non-CPM ethernet controllers - * on the 85xx and 83xx family of integrated processors * * The driver is initialized through platform_device. Structures which * define the configuration needed by the board are defined in a @@ -110,7 +109,7 @@ #endif const char gfar_driver_name[] = "Gianfar Ethernet"; -const char gfar_driver_version[] = "1.2"; +const char gfar_driver_version[] = "1.3"; static int gfar_enet_open(struct net_device *dev); static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); @@ -139,6 +138,10 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l static void gfar_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); +void gfar_halt(struct net_device *dev); +void gfar_start(struct net_device *dev); +static void gfar_clear_exact_match(struct net_device *dev); +static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); extern struct ethtool_ops gfar_ethtool_ops; @@ -146,12 +149,10 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); MODULE_LICENSE("GPL"); -int gfar_uses_fcb(struct gfar_private *priv) +/* Returns 1 if incoming frames use an FCB */ +static inline int gfar_uses_fcb(struct gfar_private *priv) { - if (priv->vlan_enable || priv->rx_csum_enable) - return 1; - else - return 0; + return (priv->vlan_enable || priv->rx_csum_enable); } /* Set up the ethernet device structure, private data, @@ -320,15 +321,10 @@ static int gfar_probe(struct platform_device *pdev) else priv->padding = 0; - dev->hard_header_len += priv->padding; - if (dev->features & NETIF_F_IP_CSUM) dev->hard_header_len += GMAC_FCB_LEN; priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE; -#ifdef CONFIG_GFAR_BUFSTASH - priv->rx_stash_size = STASH_LENGTH; -#endif priv->tx_ring_size = DEFAULT_TX_RING_SIZE; priv->rx_ring_size = DEFAULT_RX_RING_SIZE; @@ -350,6 +346,9 @@ static int gfar_probe(struct platform_device *pdev) goto register_fail; } + /* Create all the sysfs files */ + gfar_init_sysfs(dev); + /* Print out the device info */ printk(KERN_INFO DEVICE_NAME, dev->name); for (idx = 0; idx < 6; idx++) @@ -357,8 +356,7 @@ static int gfar_probe(struct platform_device *pdev) printk("\n"); /* Even more device info helps when determining which kernel */ - /* provided which set of benchmarks. Since this is global for all */ - /* devices, we only print it once */ + /* provided which set of benchmarks. */ #ifdef CONFIG_GFAR_NAPI printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name); #else @@ -463,19 +461,9 @@ static void init_registers(struct net_device *dev) /* Initialize the max receive buffer length */ gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); -#ifdef CONFIG_GFAR_BUFSTASH - /* If we are stashing buffers, we need to set the - * extraction length to the size of the buffer */ - gfar_write(&priv->regs->attreli, priv->rx_stash_size << 16); -#endif - /* Initialize the Minimum Frame Length Register */ gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS); - /* Setup Attributes so that snooping is on for rx */ - gfar_write(&priv->regs->attr, ATTR_INIT_SETTINGS); - gfar_write(&priv->regs->attreli, ATTRELI_INIT_SETTINGS); - /* Assign the TBI an address which won't conflict with the PHYs */ gfar_write(&priv->regs->tbipa, TBIPA_VALUE); } @@ -577,8 +565,7 @@ static void free_skb_resources(struct gfar_private *priv) for (i = 0; i < priv->rx_ring_size; i++) { if (priv->rx_skbuff[i]) { dma_unmap_single(NULL, rxbdp->bufPtr, - priv->rx_buffer_size - + RXBUF_ALIGNMENT, + priv->rx_buffer_size, DMA_FROM_DEVICE); dev_kfree_skb_any(priv->rx_skbuff[i]); @@ -636,6 +623,7 @@ int startup_gfar(struct net_device *dev) struct gfar *regs = priv->regs; int err = 0; u32 rctrl = 0; + u32 attrs = 0; gfar_write(®s->imask, IMASK_INIT_CLEAR); @@ -795,18 +783,50 @@ int startup_gfar(struct net_device *dev) if (priv->rx_csum_enable) rctrl |= RCTRL_CHECKSUMMING; - if (priv->extended_hash) + if (priv->extended_hash) { rctrl |= RCTRL_EXTHASH; + gfar_clear_exact_match(dev); + rctrl |= RCTRL_EMEN; + } + if (priv->vlan_enable) rctrl |= RCTRL_VLAN; + if (priv->padding) { + rctrl &= ~RCTRL_PAL_MASK; + rctrl |= RCTRL_PADDING(priv->padding); + } + /* Init rctrl based on our settings */ gfar_write(&priv->regs->rctrl, rctrl); if (dev->features & NETIF_F_IP_CSUM) gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); + /* Set the extraction length and index */ + attrs = ATTRELI_EL(priv->rx_stash_size) | + ATTRELI_EI(priv->rx_stash_index); + + gfar_write(&priv->regs->attreli, attrs); + + /* Start with defaults, and add stashing or locking + * depending on the approprate variables */ + attrs = ATTR_INIT_SETTINGS; + + if (priv->bd_stash_en) + attrs |= ATTR_BDSTASH; + + if (priv->rx_stash_size != 0) + attrs |= ATTR_BUFSTASH; + + gfar_write(&priv->regs->attr, attrs); + + gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold); + gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve); + gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off); + + /* Start the controller */ gfar_start(dev); return 0; @@ -851,34 +871,32 @@ static int gfar_enet_open(struct net_device *dev) return err; } -static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) +static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) { struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN); memset(fcb, 0, GMAC_FCB_LEN); - /* Flag the bd so the controller looks for the FCB */ - bdp->status |= TXBD_TOE; - return fcb; } static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) { - int len; + u8 flags = 0; /* If we're here, it's a IP packet with a TCP or UDP * payload. We set it to checksum, using a pseudo-header * we provide */ - fcb->ip = 1; - fcb->tup = 1; - fcb->ctu = 1; - fcb->nph = 1; + flags = TXFCB_DEFAULT; - /* Notify the controller what the protocol is */ - if (skb->nh.iph->protocol == IPPROTO_UDP) - fcb->udp = 1; + /* Tell the controller what the protocol is */ + /* And provide the already calculated phcs */ + if (skb->nh.iph->protocol == IPPROTO_UDP) { + flags |= TXFCB_UDP; + fcb->phcs = skb->h.uh->check; + } else + fcb->phcs = skb->h.th->check; /* l3os is the distance between the start of the * frame (skb->data) and the start of the IP hdr. @@ -887,17 +905,12 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN); fcb->l4os = (u16)(skb->h.raw - skb->nh.raw); - len = skb->nh.iph->tot_len - fcb->l4os; - - /* Provide the pseudoheader csum */ - fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr, - skb->nh.iph->daddr, len, - skb->nh.iph->protocol, 0); + fcb->flags = flags; } -void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) +void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) { - fcb->vln = 1; + fcb->flags |= TXFCB_VLN; fcb->vlctl = vlan_tx_tag_get(skb); } @@ -908,6 +921,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); struct txfcb *fcb = NULL; struct txbd8 *txbdp; + u16 status; /* Update transmit stats */ priv->stats.tx_bytes += skb->len; @@ -919,19 +933,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) txbdp = priv->cur_tx; /* Clear all but the WRAP status flags */ - txbdp->status &= TXBD_WRAP; + status = txbdp->status & TXBD_WRAP; /* Set up checksumming */ - if ((dev->features & NETIF_F_IP_CSUM) - && (CHECKSUM_HW == skb->ip_summed)) { + if (likely((dev->features & NETIF_F_IP_CSUM) + && (CHECKSUM_HW == skb->ip_summed))) { fcb = gfar_add_fcb(skb, txbdp); + status |= TXBD_TOE; gfar_tx_checksum(skb, fcb); } if (priv->vlan_enable && unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) { - if (NULL == fcb) + if (unlikely(NULL == fcb)) { fcb = gfar_add_fcb(skb, txbdp); + status |= TXBD_TOE; + } gfar_tx_vlan(skb, fcb); } @@ -949,14 +966,16 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size); /* Flag the BD as interrupt-causing */ - txbdp->status |= TXBD_INTERRUPT; + status |= TXBD_INTERRUPT; /* Flag the BD as ready to go, last in frame, and */ /* in need of CRC */ - txbdp->status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); + status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); dev->trans_start = jiffies; + txbdp->status = status; + /* If this was the last BD in the ring, the next one */ /* is at the beginning of the ring */ if (txbdp->status & TXBD_WRAP) @@ -1010,21 +1029,7 @@ static struct net_device_stats * gfar_get_stats(struct net_device *dev) /* Changes the mac address if the controller is not running. */ int gfar_set_mac_address(struct net_device *dev) { - struct gfar_private *priv = netdev_priv(dev); - int i; - char tmpbuf[MAC_ADDR_LEN]; - u32 tempval; - - /* Now copy it into the mac registers backwards, cuz */ - /* little endian is silly */ - for (i = 0; i < MAC_ADDR_LEN; i++) - tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->dev_addr[i]; - - gfar_write(&priv->regs->macstnaddr1, *((u32 *) (tmpbuf))); - - tempval = *((u32 *) (tmpbuf + 4)); - - gfar_write(&priv->regs->macstnaddr2, tempval); + gfar_set_mac_for_addr(dev, 0, dev->dev_addr); return 0; } @@ -1110,7 +1115,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) INCREMENTAL_BUFFER_SIZE; /* Only stop and start the controller if it isn't already - * stopped */ + * stopped, and we changed something */ if ((oldsize != tempsize) && (dev->flags & IFF_UP)) stop_gfar(dev); @@ -1220,6 +1225,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs) struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) { + unsigned int alignamount; struct gfar_private *priv = netdev_priv(dev); struct sk_buff *skb = NULL; unsigned int timeout = SKB_ALLOC_TIMEOUT; @@ -1231,18 +1237,18 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) if (NULL == skb) return NULL; + alignamount = RXBUF_ALIGNMENT - + (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1)); + /* We need the data buffer to be aligned properly. We will reserve * as many bytes as needed to align the data properly */ - skb_reserve(skb, - RXBUF_ALIGNMENT - - (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1))); + skb_reserve(skb, alignamount); skb->dev = dev; bdp->bufPtr = dma_map_single(NULL, skb->data, - priv->rx_buffer_size + RXBUF_ALIGNMENT, - DMA_FROM_DEVICE); + priv->rx_buffer_size, DMA_FROM_DEVICE); bdp->length = 0; @@ -1350,7 +1356,7 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) /* If valid headers were found, and valid sums * were verified, then we tell the kernel that no * checksumming is necessary. Otherwise, it is */ - if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu) + if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU)) skb->ip_summed = CHECKSUM_UNNECESSARY; else skb->ip_summed = CHECKSUM_NONE; @@ -1401,7 +1407,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, skb->protocol = eth_type_trans(skb, dev); /* Send the packet up the stack */ - if (unlikely(priv->vlgrp && fcb->vln)) + if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); else ret = RECEIVE(skb); @@ -1620,6 +1626,7 @@ static void adjust_link(struct net_device *dev) spin_lock_irqsave(&priv->lock, flags); if (phydev->link) { u32 tempval = gfar_read(®s->maccfg2); + u32 ecntrl = gfar_read(®s->ecntrl); /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ @@ -1644,6 +1651,13 @@ static void adjust_link(struct net_device *dev) case 10: tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); + + /* Reduced mode distinguishes + * between 10 and 100 */ + if (phydev->speed == SPEED_100) + ecntrl |= ECNTRL_R100; + else + ecntrl &= ~(ECNTRL_R100); break; default: if (netif_msg_link(priv)) @@ -1657,6 +1671,7 @@ static void adjust_link(struct net_device *dev) } gfar_write(®s->maccfg2, tempval); + gfar_write(®s->ecntrl, ecntrl); if (!priv->oldlink) { new_state = 1; @@ -1721,6 +1736,9 @@ static void gfar_set_multi(struct net_device *dev) gfar_write(®s->gaddr6, 0xffffffff); gfar_write(®s->gaddr7, 0xffffffff); } else { + int em_num; + int idx; + /* zero out the hash */ gfar_write(®s->igaddr0, 0x0); gfar_write(®s->igaddr1, 0x0); @@ -1739,18 +1757,47 @@ static void gfar_set_multi(struct net_device *dev) gfar_write(®s->gaddr6, 0x0); gfar_write(®s->gaddr7, 0x0); + /* If we have extended hash tables, we need to + * clear the exact match registers to prepare for + * setting them */ + if (priv->extended_hash) { + em_num = GFAR_EM_NUM + 1; + gfar_clear_exact_match(dev); + idx = 1; + } else { + idx = 0; + em_num = 0; + } + if(dev->mc_count == 0) return; /* Parse the list, and set the appropriate bits */ for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { - gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); + if (idx < em_num) { + gfar_set_mac_for_addr(dev, idx, + mc_ptr->dmi_addr); + idx++; + } else + gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); } } return; } + +/* Clears each of the exact match registers to zero, so they + * don't interfere with normal reception */ +static void gfar_clear_exact_match(struct net_device *dev) +{ + int idx; + u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0}; + + for(idx = 1;idx < GFAR_EM_NUM + 1;idx++) + gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr); +} + /* Set the appropriate hash bit for the given addr */ /* The algorithm works like so: * 1) Take the Destination Address (ie the multicast address), and @@ -1781,6 +1828,32 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) return; } + +/* There are multiple MAC Address register pairs on some controllers + * This function sets the numth pair to a given address + */ +static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr) +{ + struct gfar_private *priv = netdev_priv(dev); + int idx; + char tmpbuf[MAC_ADDR_LEN]; + u32 tempval; + u32 *macptr = &priv->regs->macstnaddr1; + + macptr += num*2; + + /* Now copy it into the mac registers backwards, cuz */ + /* little endian is silly */ + for (idx = 0; idx < MAC_ADDR_LEN; idx++) + tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx]; + + gfar_write(macptr, *((u32 *) (tmpbuf))); + + tempval = *((u32 *) (tmpbuf + 4)); + + gfar_write(macptr+1, tempval); +} + /* GFAR error interrupt handler */ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs) { diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 5065ba82cb76..94a91da84fbb 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -90,12 +90,26 @@ extern const char gfar_driver_version[]; #define GFAR_RX_MAX_RING_SIZE 256 #define GFAR_TX_MAX_RING_SIZE 256 +#define GFAR_MAX_FIFO_THRESHOLD 511 +#define GFAR_MAX_FIFO_STARVE 511 +#define GFAR_MAX_FIFO_STARVE_OFF 511 + #define DEFAULT_RX_BUFFER_SIZE 1536 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) #define JUMBO_BUFFER_SIZE 9728 #define JUMBO_FRAME_SIZE 9600 +#define DEFAULT_FIFO_TX_THR 0x100 +#define DEFAULT_FIFO_TX_STARVE 0x40 +#define DEFAULT_FIFO_TX_STARVE_OFF 0x80 +#define DEFAULT_BD_STASH 1 +#define DEFAULT_STASH_LENGTH 64 +#define DEFAULT_STASH_INDEX 0 + +/* The number of Exact Match registers */ +#define GFAR_EM_NUM 15 + /* Latency of interface clock in nanoseconds */ /* Interface clock latency , in this case, means the * time described by a value of 1 in the interrupt @@ -112,11 +126,11 @@ extern const char gfar_driver_version[]; #define DEFAULT_TX_COALESCE 1 #define DEFAULT_TXCOUNT 16 -#define DEFAULT_TXTIME 400 +#define DEFAULT_TXTIME 4 #define DEFAULT_RX_COALESCE 1 #define DEFAULT_RXCOUNT 16 -#define DEFAULT_RXTIME 400 +#define DEFAULT_RXTIME 4 #define TBIPA_VALUE 0x1f #define MIIMCFG_INIT_VALUE 0x00000007 @@ -147,6 +161,7 @@ extern const char gfar_driver_version[]; #define ECNTRL_INIT_SETTINGS 0x00001000 #define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_R100 0x00000008 #define MRBLR_INIT_SETTINGS DEFAULT_RX_BUFFER_SIZE @@ -181,10 +196,12 @@ extern const char gfar_driver_version[]; #define RCTRL_PRSDEP_MASK 0x000000c0 #define RCTRL_PRSDEP_INIT 0x000000c0 #define RCTRL_PROM 0x00000008 +#define RCTRL_EMEN 0x00000002 #define RCTRL_CHECKSUMMING (RCTRL_IPCSEN \ | RCTRL_TUCSEN | RCTRL_PRSDEP_INIT) #define RCTRL_EXTHASH (RCTRL_GHTX) #define RCTRL_VLAN (RCTRL_PRSDEP_INIT) +#define RCTRL_PADDING(x) ((x << 16) & RCTRL_PAL_MASK) #define RSTAT_CLEAR_RHALT 0x00800000 @@ -251,28 +268,26 @@ extern const char gfar_driver_version[]; IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \ | IMASK_PERR) +/* Fifo management */ +#define FIFO_TX_THR_MASK 0x01ff +#define FIFO_TX_STARVE_MASK 0x01ff +#define FIFO_TX_STARVE_OFF_MASK 0x01ff /* Attribute fields */ /* This enables rx snooping for buffers and descriptors */ -#ifdef CONFIG_GFAR_BDSTASH #define ATTR_BDSTASH 0x00000800 -#else -#define ATTR_BDSTASH 0x00000000 -#endif -#ifdef CONFIG_GFAR_BUFSTASH #define ATTR_BUFSTASH 0x00004000 -#define STASH_LENGTH 64 -#else -#define ATTR_BUFSTASH 0x00000000 -#endif #define ATTR_SNOOPING 0x000000c0 -#define ATTR_INIT_SETTINGS (ATTR_SNOOPING \ - | ATTR_BDSTASH | ATTR_BUFSTASH) +#define ATTR_INIT_SETTINGS ATTR_SNOOPING #define ATTRELI_INIT_SETTINGS 0x0 +#define ATTRELI_EL_MASK 0x3fff0000 +#define ATTRELI_EL(x) (x << 16) +#define ATTRELI_EI_MASK 0x00003fff +#define ATTRELI_EI(x) (x) /* TxBD status field bits */ @@ -328,6 +343,7 @@ extern const char gfar_driver_version[]; #define RXFCB_CTU 0x0400 #define RXFCB_EIP 0x0200 #define RXFCB_ETU 0x0100 +#define RXFCB_CSUM_MASK 0x0f00 #define RXFCB_PERR_MASK 0x000c #define RXFCB_PERR_BADL3 0x0008 @@ -339,14 +355,7 @@ struct txbd8 }; struct txfcb { - u8 vln:1, - ip:1, - ip6:1, - tup:1, - udp:1, - cip:1, - ctu:1, - nph:1; + u8 flags; u8 reserved; u8 l4os; /* Level 4 Header Offset */ u8 l3os; /* Level 3 Header Offset */ @@ -362,14 +371,7 @@ struct rxbd8 }; struct rxfcb { - u16 vln:1, - ip:1, - ip6:1, - tup:1, - cip:1, - ctu:1, - eip:1, - etu:1; + u16 flags; u8 rq; /* Receive Queue index */ u8 pro; /* Layer 4 Protocol */ u16 reserved; @@ -688,12 +690,17 @@ struct gfar_private { spinlock_t lock; unsigned int rx_buffer_size; unsigned int rx_stash_size; + unsigned int rx_stash_index; unsigned int tx_ring_size; unsigned int rx_ring_size; + unsigned int fifo_threshold; + unsigned int fifo_starve; + unsigned int fifo_starve_off; unsigned char vlan_enable:1, rx_csum_enable:1, - extended_hash:1; + extended_hash:1, + bd_stash_en:1; unsigned short padding; struct vlan_group *vlgrp; /* Info structure initialized by board setup code */ @@ -731,6 +738,6 @@ extern void stop_gfar(struct net_device *dev); extern void gfar_halt(struct net_device *dev); extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable, u32 regnum, u32 read); -void gfar_setup_stashing(struct net_device *dev); +void gfar_init_sysfs(struct net_device *dev); #endif /* __GIANFAR_H */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index cfa3cd7c91a0..765e810620fe 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -125,7 +125,7 @@ static char stat_gstrings[][ETH_GSTRING_LEN] = { static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) { struct gfar_private *priv = netdev_priv(dev); - + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); else diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index e85eb216fb5b..d527cf2f9c1d 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -24,6 +24,7 @@ #define MII_READ_COMMAND 0x00000001 #define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ + | SUPPORTED_10baseT_Full \ | SUPPORTED_100baseT_Half \ | SUPPORTED_100baseT_Full \ | SUPPORTED_Autoneg \ diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c new file mode 100644 index 000000000000..10d34cb19192 --- /dev/null +++ b/drivers/net/gianfar_sysfs.c @@ -0,0 +1,311 @@ +/* + * drivers/net/gianfar_sysfs.c + * + * Gianfar Ethernet Driver + * This driver is designed for the non-CPM ethernet controllers + * on the 85xx and 83xx family of integrated processors + * Based on 8260_io/fcc_enet.c + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2005 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Sysfs file creation and management + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/device.h> + +#include <asm/uaccess.h> +#include <linux/module.h> +#include <linux/version.h> + +#include "gianfar.h" + +#define GFAR_ATTR(_name) \ +static ssize_t gfar_show_##_name(struct class_device *cdev, char *buf); \ +static ssize_t gfar_set_##_name(struct class_device *cdev, \ + const char *buf, size_t count); \ +static CLASS_DEVICE_ATTR(_name, 0644, gfar_show_##_name, gfar_set_##_name) + +#define GFAR_CREATE_FILE(_dev, _name) \ + class_device_create_file(&_dev->class_dev, &class_device_attr_##_name) + +GFAR_ATTR(bd_stash); +GFAR_ATTR(rx_stash_size); +GFAR_ATTR(rx_stash_index); +GFAR_ATTR(fifo_threshold); +GFAR_ATTR(fifo_starve); +GFAR_ATTR(fifo_starve_off); + +#define to_net_dev(cd) container_of(cd, struct net_device, class_dev) + +static ssize_t gfar_show_bd_stash(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%s\n", priv->bd_stash_en? "on" : "off"); +} + +static ssize_t gfar_set_bd_stash(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + int new_setting = 0; + u32 temp; + unsigned long flags; + + /* Find out the new setting */ + if (!strncmp("on", buf, count-1) || !strncmp("1", buf, count-1)) + new_setting = 1; + else if (!strncmp("off", buf, count-1) || !strncmp("0", buf, count-1)) + new_setting = 0; + else + return count; + + spin_lock_irqsave(&priv->lock, flags); + + /* Set the new stashing value */ + priv->bd_stash_en = new_setting; + + temp = gfar_read(&priv->regs->attr); + + if (new_setting) + temp |= ATTR_BDSTASH; + else + temp &= ~(ATTR_BDSTASH); + + gfar_write(&priv->regs->attr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_rx_stash_size(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->rx_stash_size); +} + +static ssize_t gfar_set_rx_stash_size(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int length = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (length > priv->rx_buffer_size) + return count; + + if (length == priv->rx_stash_size) + return count; + + priv->rx_stash_size = length; + + temp = gfar_read(&priv->regs->attreli); + temp &= ~ATTRELI_EL_MASK; + temp |= ATTRELI_EL(length); + gfar_write(&priv->regs->attreli, temp); + + /* Turn stashing on/off as appropriate */ + temp = gfar_read(&priv->regs->attr); + + if (length) + temp |= ATTR_BUFSTASH; + else + temp &= ~(ATTR_BUFSTASH); + + gfar_write(&priv->regs->attr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + + +/* Stashing will only be enabled when rx_stash_size != 0 */ +static ssize_t gfar_show_rx_stash_index(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->rx_stash_index); +} + +static ssize_t gfar_set_rx_stash_index(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned short index = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (index > priv->rx_stash_size) + return count; + + if (index == priv->rx_stash_index) + return count; + + priv->rx_stash_index = index; + + temp = gfar_read(&priv->regs->attreli); + temp &= ~ATTRELI_EI_MASK; + temp |= ATTRELI_EI(index); + gfar_write(&priv->regs->attreli, flags); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_threshold(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_threshold); +} + +static ssize_t gfar_set_fifo_threshold(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int length = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (length > GFAR_MAX_FIFO_THRESHOLD) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_threshold = length; + + temp = gfar_read(&priv->regs->fifo_tx_thr); + temp &= ~FIFO_TX_THR_MASK; + temp |= length; + gfar_write(&priv->regs->fifo_tx_thr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_starve(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_starve); +} + + +static ssize_t gfar_set_fifo_starve(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int num = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (num > GFAR_MAX_FIFO_STARVE) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_starve = num; + + temp = gfar_read(&priv->regs->fifo_tx_starve); + temp &= ~FIFO_TX_STARVE_MASK; + temp |= num; + gfar_write(&priv->regs->fifo_tx_starve, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_starve_off(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_starve_off); +} + +static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int num = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (num > GFAR_MAX_FIFO_STARVE_OFF) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_starve_off = num; + + temp = gfar_read(&priv->regs->fifo_tx_starve_shutoff); + temp &= ~FIFO_TX_STARVE_OFF_MASK; + temp |= num; + gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +void gfar_init_sysfs(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + /* Initialize the default values */ + priv->rx_stash_size = DEFAULT_STASH_LENGTH; + priv->rx_stash_index = DEFAULT_STASH_INDEX; + priv->fifo_threshold = DEFAULT_FIFO_TX_THR; + priv->fifo_starve = DEFAULT_FIFO_TX_STARVE; + priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF; + priv->bd_stash_en = DEFAULT_BD_STASH; + + /* Create our sysfs files */ + GFAR_CREATE_FILE(dev, bd_stash); + GFAR_CREATE_FILE(dev, rx_stash_size); + GFAR_CREATE_FILE(dev, rx_stash_index); + GFAR_CREATE_FILE(dev, fifo_threshold); + GFAR_CREATE_FILE(dev, fifo_starve); + GFAR_CREATE_FILE(dev, fifo_starve_off); + +} diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index c22c0517883c..fa176ffb4ad5 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1539,7 +1539,6 @@ static void irda_usb_disconnect(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "irda-usb", .probe = irda_usb_probe, .disconnect = irda_usb_disconnect, diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 3961a754e920..31867e4b891b 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -1152,7 +1152,6 @@ static int stir_resume(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "stir4200", .probe = stir_probe, .disconnect = stir_disconnect, diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ixp2000/Kconfig new file mode 100644 index 000000000000..2fec2415651f --- /dev/null +++ b/drivers/net/ixp2000/Kconfig @@ -0,0 +1,6 @@ +config ENP2611_MSF_NET + tristate "Radisys ENP2611 MSF network interface support" + depends on ARCH_ENP2611 + help + This is a driver for the MSF network interface unit in + the IXP2400 on the Radisys ENP2611 platform. diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ixp2000/Makefile new file mode 100644 index 000000000000..fd38351ceaa7 --- /dev/null +++ b/drivers/net/ixp2000/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o + +enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c new file mode 100644 index 000000000000..3595e107df22 --- /dev/null +++ b/drivers/net/ixp2000/caleb.c @@ -0,0 +1,137 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/io.h> +#include "caleb.h" + +#define CALEB_IDLO 0x00 +#define CALEB_IDHI 0x01 +#define CALEB_RID 0x02 +#define CALEB_RESET 0x03 +#define CALEB_INTREN0 0x04 +#define CALEB_INTREN1 0x05 +#define CALEB_INTRSTAT0 0x06 +#define CALEB_INTRSTAT1 0x07 +#define CALEB_PORTEN 0x08 +#define CALEB_BURST 0x09 +#define CALEB_PORTPAUS 0x0A +#define CALEB_PORTPAUSD 0x0B +#define CALEB_PHY0RX 0x10 +#define CALEB_PHY1RX 0x11 +#define CALEB_PHY0TX 0x12 +#define CALEB_PHY1TX 0x13 +#define CALEB_IXPRX_HI_CNTR 0x15 +#define CALEB_PHY0RX_HI_CNTR 0x16 +#define CALEB_PHY1RX_HI_CNTR 0x17 +#define CALEB_IXPRX_CNTR 0x18 +#define CALEB_PHY0RX_CNTR 0x19 +#define CALEB_PHY1RX_CNTR 0x1A +#define CALEB_IXPTX_CNTR 0x1B +#define CALEB_PHY0TX_CNTR 0x1C +#define CALEB_PHY1TX_CNTR 0x1D +#define CALEB_DEBUG0 0x1E +#define CALEB_DEBUG1 0x1F + + +static u8 caleb_reg_read(int reg) +{ + u8 value; + + value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); + +// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); + + return value; +} + +static void caleb_reg_write(int reg, u8 value) +{ + u8 dummy; + +// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); + + *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; + + dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + + +void caleb_reset(void) +{ + /* + * Perform a chip reset. + */ + caleb_reg_write(CALEB_RESET, 0x02); + udelay(1); + + /* + * Enable all interrupt sources. This is needed to get + * meaningful results out of the status bits (register 6 + * and 7.) + */ + caleb_reg_write(CALEB_INTREN0, 0xff); + caleb_reg_write(CALEB_INTREN1, 0x07); + + /* + * Set RX and TX FIFO thresholds to 1.5kb. + */ + caleb_reg_write(CALEB_PHY0RX, 0x11); + caleb_reg_write(CALEB_PHY1RX, 0x11); + caleb_reg_write(CALEB_PHY0TX, 0x11); + caleb_reg_write(CALEB_PHY1TX, 0x11); + + /* + * Program SPI-3 burst size. + */ + caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets +} + +void caleb_enable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << port; + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << port); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_enable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << (port + 4); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << (port + 4)); + caleb_reg_write(CALEB_PORTEN, temp); +} diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ixp2000/caleb.h new file mode 100644 index 000000000000..e93a1ef5b8a3 --- /dev/null +++ b/drivers/net/ixp2000/caleb.h @@ -0,0 +1,22 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __CALEB_H +#define __CALEB_H + +void caleb_reset(void); +void caleb_enable_rx(int port); +void caleb_disable_rx(int port); +void caleb_enable_tx(int port); +void caleb_disable_tx(int port); + + +#endif diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c new file mode 100644 index 000000000000..d82651a97bae --- /dev/null +++ b/drivers/net/ixp2000/enp2611.c @@ -0,0 +1,245 @@ +/* + * IXP2400 MSF network device driver for the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <asm/arch/uengine.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include "ixpdev.h" +#include "caleb.h" +#include "ixp2400-msf.h" +#include "pm3386.h" + +/*********************************************************************** + * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC + * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA + * to the IXP2400. + * + * +-------------+ + * SFP GBIC #0 ---+ | +---------+ + * | PM3386 #0 +-------+ | + * SFP GBIC #1 ---+ | | "Caleb" | +---------+ + * +-------------+ | | | | + * | SPI-3 +---------+ IXP2400 | + * +-------------+ | bridge | | | + * SFP GBIC #2 ---+ | | FPGA | +---------+ + * | PM3386 #1 +-------+ | + * | | +---------+ + * +-------------+ + * ^ ^ ^ + * | 1.25Gbaud | 104MHz | 104MHz + * | SERDES ea. | SPI-3 ea. | SPI-3 + * + ***********************************************************************/ +static struct ixp2400_msf_parameters enp2611_msf_parameters = +{ + .rx_mode = IXP2400_RX_MODE_UTOPIA_POS | + IXP2400_RX_MODE_1x32 | + IXP2400_RX_MODE_MPHY | + IXP2400_RX_MODE_MPHY_32 | + IXP2400_RX_MODE_MPHY_POLLED_STATUS | + IXP2400_RX_MODE_MPHY_LEVEL3 | + IXP2400_RX_MODE_RBUF_SIZE_64, + + .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .rx_poll_ports = 3, + + .rx_channel_mode = { + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE + }, + + .tx_mode = IXP2400_TX_MODE_UTOPIA_POS | + IXP2400_TX_MODE_1x32 | + IXP2400_TX_MODE_MPHY | + IXP2400_TX_MODE_MPHY_32 | + IXP2400_TX_MODE_MPHY_POLLED_STATUS | + IXP2400_TX_MODE_MPHY_LEVEL3 | + IXP2400_TX_MODE_TBUF_SIZE_64, + + .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .tx_poll_ports = 3, + + .tx_channel_mode = { + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE + } +}; + +struct enp2611_ixpdev_priv +{ + struct ixpdev_priv ixpdev_priv; + struct net_device_stats stats; +}; + +static struct net_device *nds[3]; +static struct timer_list link_check_timer; + +static struct net_device_stats *enp2611_get_stats(struct net_device *dev) +{ + struct enp2611_ixpdev_priv *ip = netdev_priv(dev); + + pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats)); + + return &(ip->stats); +} + +/* @@@ Poll the SFP moddef0 line too. */ +/* @@@ Try to use the pm3386 DOOL interrupt as well. */ +static void enp2611_check_link_status(unsigned long __dummy) +{ + int i; + + for (i = 0; i < 3; i++) { + struct net_device *dev; + int status; + + dev = nds[i]; + + status = pm3386_is_link_up(i); + if (status && !netif_carrier_ok(dev)) { + /* @@@ Should report autonegotiation status. */ + printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); + + pm3386_enable_tx(i); + caleb_enable_tx(i); + netif_carrier_on(dev); + } else if (!status && netif_carrier_ok(dev)) { + printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); + + netif_carrier_off(dev); + caleb_disable_tx(i); + pm3386_disable_tx(i); + } + } + + link_check_timer.expires = jiffies + HZ / 10; + add_timer(&link_check_timer); +} + +static void enp2611_set_port_admin_status(int port, int up) +{ + if (up) { + caleb_enable_rx(port); + + pm3386_set_carrier(port, 1); + pm3386_enable_rx(port); + } else { + caleb_disable_tx(port); + pm3386_disable_tx(port); + /* @@@ Flush out pending packets. */ + pm3386_set_carrier(port, 0); + + pm3386_disable_rx(port); + caleb_disable_rx(port); + } +} + +static int __init enp2611_init_module(void) +{ + int i; + + if (!machine_is_enp2611()) + return -ENODEV; + + caleb_reset(); + pm3386_reset(); + + for (i = 0; i < 3; i++) { + nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); + if (nds[i] == NULL) { + while (--i >= 0) + free_netdev(nds[i]); + return -ENOMEM; + } + + SET_MODULE_OWNER(nds[i]); + nds[i]->get_stats = enp2611_get_stats; + pm3386_init_port(i); + pm3386_get_mac(i, nds[i]->dev_addr); + } + + ixp2400_msf_init(&enp2611_msf_parameters); + + if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) { + for (i = 0; i < 3; i++) + free_netdev(nds[i]); + return -EINVAL; + } + + init_timer(&link_check_timer); + link_check_timer.function = enp2611_check_link_status; + link_check_timer.expires = jiffies; + add_timer(&link_check_timer); + + return 0; +} + +static void __exit enp2611_cleanup_module(void) +{ + int i; + + del_timer_sync(&link_check_timer); + + ixpdev_deinit(); + for (i = 0; i < 3; i++) + free_netdev(nds[i]); +} + +module_init(enp2611_init_module); +module_exit(enp2611_cleanup_module); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c new file mode 100644 index 000000000000..48a3a891d3a4 --- /dev/null +++ b/drivers/net/ixp2000/ixp2400-msf.c @@ -0,0 +1,213 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/hardware.h> +#include <asm/arch/ixp2000-regs.h> +#include <asm/delay.h> +#include <asm/io.h> +#include "ixp2400-msf.h" + +/* + * This is the Intel recommended PLL init procedure as described on + * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual. + */ +static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp) +{ + int rx_dual_clock; + int tx_dual_clock; + u32 value; + + /* + * If the RX mode is not 1x32, we have to enable both RX PLLs + * (#0 and #1.) The same thing for the TX direction. + */ + rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK); + tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK); + + /* + * Read initial value. + */ + value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL); + + /* + * Put PLLs in powerdown and bypass mode. + */ + value |= 0x0000f0f0; + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Set single or dual clock mode bits. + */ + value &= ~0x03000000; + value |= (rx_dual_clock << 24) | (tx_dual_clock << 25); + + /* + * Set multipliers. + */ + value &= ~0x00ff0000; + value |= mp->rxclk01_multiplier << 16; + value |= mp->rxclk23_multiplier << 18; + value |= mp->txclk01_multiplier << 20; + value |= mp->txclk23_multiplier << 22; + + /* + * And write value. + */ + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Disable PLL bypass mode. + */ + value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Turn on PLLs. + */ + value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Wait for PLLs to lock. There are lock status bits, but IXP2400 + * erratum #65 says that these lock bits should not be relied upon + * as they might not accurately reflect the true state of the PLLs. + */ + udelay(100); +} + +/* + * Needed according to p480 of Programmer's Reference Manual. + */ +static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp) +{ + int size_bits; + int i; + + /* + * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer + * corruption) in the Intel-recommended way: do not add the RBUF + * elements susceptible to corruption to the freelist. + */ + size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK; + if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) { + for (i = 1; i < 128; i++) { + if (i == 9 || i == 18 || i == 27) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) { + for (i = 1; i < 64; i++) { + if (i == 4 || i == 9 || i == 13) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) { + for (i = 1; i < 32; i++) { + if (i == 2 || i == 4 || i == 6) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } +} + +static u32 ixp2400_msf_valid_channels(u32 reg) +{ + u32 channels; + + channels = 0; + switch (reg & IXP2400_RX_MODE_WIDTH_MASK) { + case IXP2400_RX_MODE_1x32: + channels = 0x1; + if (reg & IXP2400_RX_MODE_MPHY && + !(reg & IXP2400_RX_MODE_MPHY_32)) + channels = 0xf; + break; + + case IXP2400_RX_MODE_2x16: + channels = 0x5; + break; + + case IXP2400_RX_MODE_4x8: + channels = 0xf; + break; + + case IXP2400_RX_MODE_1x16_2x8: + channels = 0xd; + break; + } + + return channels; +} + +static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value); +} + +static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value); +} + + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp) +{ + u32 value; + int i; + + /* + * Init the RX/TX PLLs based on the passed parameter block. + */ + ixp2400_pll_init(mp); + + /* + * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF. + */ + value = ixp2000_reg_read(IXP2000_RESET0); + ixp2000_reg_write(IXP2000_RESET0, value | 0x80); + ixp2000_reg_write(IXP2000_RESET0, value & ~0x80); + + /* + * Initialise the RX section. + */ + ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i, + mp->rx_channel_mode[i]); + } + ixp2400_msf_free_rbuf_entries(mp); + ixp2400_msf_enable_rx(mp); + + /* + * Initialise the TX section. + */ + ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i, + mp->tx_channel_mode[i]); + } + ixp2400_msf_enable_tx(mp); +} diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ixp2000/ixp2400-msf.h new file mode 100644 index 000000000000..3ac1af2771da --- /dev/null +++ b/drivers/net/ixp2000/ixp2400-msf.h @@ -0,0 +1,115 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2400_MSF_H +#define __IXP2400_MSF_H + +struct ixp2400_msf_parameters +{ + u32 rx_mode; + unsigned rxclk01_multiplier:2; + unsigned rxclk23_multiplier:2; + unsigned rx_poll_ports:6; + u32 rx_channel_mode[4]; + + u32 tx_mode; + unsigned txclk01_multiplier:2; + unsigned txclk23_multiplier:2; + unsigned tx_poll_ports:6; + u32 tx_channel_mode[4]; +}; + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp); + +#define IXP2400_PLL_MULTIPLIER_48 0x00 +#define IXP2400_PLL_MULTIPLIER_24 0x01 +#define IXP2400_PLL_MULTIPLIER_16 0x02 +#define IXP2400_PLL_MULTIPLIER_12 0x03 + +#define IXP2400_RX_MODE_CSIX 0x00400000 +#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_RX_MODE_1x16_2x8 0x00300000 +#define IXP2400_RX_MODE_4x8 0x00200000 +#define IXP2400_RX_MODE_2x16 0x00100000 +#define IXP2400_RX_MODE_1x32 0x00000000 +#define IXP2400_RX_MODE_MPHY 0x00080000 +#define IXP2400_RX_MODE_SPHY 0x00000000 +#define IXP2400_RX_MODE_MPHY_32 0x00040000 +#define IXP2400_RX_MODE_MPHY_4 0x00000000 +#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200 +#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000 +#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c +#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008 +#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004 +#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_RX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020 +#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000 +#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000 + +#define IXP2400_TX_MODE_CSIX 0x00400000 +#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_TX_MODE_1x16_2x8 0x00300000 +#define IXP2400_TX_MODE_4x8 0x00200000 +#define IXP2400_TX_MODE_2x16 0x00100000 +#define IXP2400_TX_MODE_1x32 0x00000000 +#define IXP2400_TX_MODE_MPHY 0x00080000 +#define IXP2400_TX_MODE_SPHY 0x00000000 +#define IXP2400_TX_MODE_MPHY_32 0x00040000 +#define IXP2400_TX_MODE_MPHY_4 0x00000000 +#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c +#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008 +#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004 +#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_TX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000 + + +#endif diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc new file mode 100644 index 000000000000..42a73e357afa --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_rx.uc @@ -0,0 +1,408 @@ +/* + * RX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one full element list is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The RBUF uses 64-byte mpackets. + * - RX descriptors reside in SRAM, and have the following format: + * struct rx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 buf_length; + * + * // from uengine + * u32 channel; + * u32 pkt_length; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 0 is rx_pending. + * - Scratch ring 1 is rx_done, and has status condition 'full'. + * - The host triggers rx_done flush and rx_pending refill on seeing INTA. + * - This code is run on all eight threads of the microengine it runs on. + * + * Local memory is used for per-channel RX state. + */ + +#define RX_THREAD_FREELIST_0 0x0030 +#define RBUF_ELEMENT_DONE 0x0044 + +#define CHANNEL_FLAGS *l$index0[0] +#define CHANNEL_FLAG_RECEIVING 1 +#define PACKET_LENGTH *l$index0[1] +#define PACKET_CHECKSUM *l$index0[2] +#define BUFFER_HANDLE *l$index0[3] +#define BUFFER_START *l$index0[4] +#define BUFFER_LENGTH *l$index0[5] + +#define CHANNEL_STATE_SIZE 24 // in bytes +#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size)) + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .sig mpacket_arrived + .reg add_to_rx_freelist + .reg read $rsw0, $rsw1 + .xfer_order $rsw0 $rsw1 + + .reg zero + + /* + * Initialise add_to_rx_freelist. + */ + .begin + .reg temp + .reg temp2 + + immed[add_to_rx_freelist, RX_THREAD_FREELIST_0] + immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))] + + local_csr_rd[ACTIVE_CTX_STS] + immed[temp, 0] + alu[temp2, temp, and, 0x1f] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20] + alu[temp2, temp, and, 0x80] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18] + .end + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_receive_loop#] + .end + + /* + * Initialise local memory. + */ + .begin + .reg addr + .reg temp + + immed[temp, 0] + init_local_mem_loop#: + alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, addr] + nop + nop + nop + + immed[CHANNEL_FLAGS, 0] + + alu[temp, temp, +, 1] + alu[--, temp, and, 0x20] + beq[init_local_mem_loop#] + .end + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_receive_loop#: + /* + * Synchronise and wait for mpacket. + */ + .begin + ctx_arb[sig1] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + + msf[fast_wr, --, add_to_rx_freelist, 0] + .set_sig mpacket_arrived + ctx_arb[mpacket_arrived] + .set $rsw0 $rsw1 + .end + + /* + * We halt if we see {inbparerr,parerr,null,soperror}. + */ + .begin + alu_shf[--, 0x1b, and, $rsw0, >>8] + bne[abort_rswerr#] + .end + + /* + * Point local memory pointer to this channel's state area. + */ + .begin + .reg chanaddr + + alu[chanaddr, $rsw0, and, 0x1f] + alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr] + nop + nop + nop + .end + + /* + * Check whether we received a SOP mpacket while we were already + * working on a packet, or a non-SOP mpacket while there was no + * packet pending. (SOP == RECEIVING -> abort) If everything's + * okay, update the RECEIVING flag to reflect our new state. + */ + .begin + .reg temp + .reg eop + + #if CHANNEL_FLAG_RECEIVING != 1 + #error CHANNEL_FLAG_RECEIVING is not 1 + #endif + + alu_shf[temp, 1, and, $rsw0, >>15] + alu[temp, temp, xor, CHANNEL_FLAGS] + alu[--, temp, and, CHANNEL_FLAG_RECEIVING] + beq[abort_proterr#] + + alu_shf[eop, 1, and, $rsw0, >>14] + alu[CHANNEL_FLAGS, temp, xor, eop] + .end + + /* + * Copy the mpacket into the right spot, and in case of EOP, + * write back the descriptor and pass the packet on. + */ + .begin + .reg buffer_offset + .reg _packet_length + .reg _packet_checksum + .reg _buffer_handle + .reg _buffer_start + .reg _buffer_length + + /* + * Determine buffer_offset, _packet_length and + * _packet_checksum. + */ + .begin + .reg temp + + alu[--, 1, and, $rsw0, >>15] + beq[not_sop#] + + immed[PACKET_LENGTH, 0] + immed[PACKET_CHECKSUM, 0] + + not_sop#: + alu[buffer_offset, --, b, PACKET_LENGTH] + alu_shf[temp, 0xff, and, $rsw0, >>16] + alu[_packet_length, buffer_offset, +, temp] + alu[PACKET_LENGTH, --, b, _packet_length] + + immed[temp, 0xffff] + alu[temp, $rsw1, and, temp] + alu[_packet_checksum, PACKET_CHECKSUM, +, temp] + alu[PACKET_CHECKSUM, --, b, _packet_checksum] + .end + + /* + * Allocate buffer in case of SOP. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[skip_buffer_alloc#] + + .begin + .sig zzz + .reg read $stemp $stemp2 + .xfer_order $stemp $stemp2 + + rx_nobufs#: + scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz] + alu[_buffer_handle, --, b, $stemp] + beq[rx_nobufs#] + + sram[read, $stemp, _buffer_handle, 0, 2], + ctx_swap[zzz] + alu[_buffer_start, --, b, $stemp] + alu[_buffer_length, --, b, $stemp2] + .end + + skip_buffer_alloc#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig2] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Synchronise buffer state. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[copy_from_local_mem#] + + alu[BUFFER_HANDLE, --, b, _buffer_handle] + alu[BUFFER_START, --, b, _buffer_start] + alu[BUFFER_LENGTH, --, b, _buffer_length] + br[sync_state_done#] + + copy_from_local_mem#: + alu[_buffer_handle, --, b, BUFFER_HANDLE] + alu[_buffer_start, --, b, BUFFER_START] + alu[_buffer_length, --, b, BUFFER_LENGTH] + + sync_state_done#: + .end + +#if 0 + /* + * Debug buffer state management. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>14] + beq[no_poison#] + immed[BUFFER_HANDLE, 0xdead] + immed[BUFFER_START, 0xdead] + immed[BUFFER_LENGTH, 0xdead] + no_poison#: + + immed[temp, 0xdead] + alu[--, _buffer_handle, -, temp] + beq[state_corrupted#] + alu[--, _buffer_start, -, temp] + beq[state_corrupted#] + alu[--, _buffer_length, -, temp] + beq[state_corrupted#] + .end +#endif + + /* + * Check buffer length. + */ + .begin + alu[--, _buffer_length, -, _packet_length] + blo[buffer_overflow#] + .end + + /* + * Copy the mpacket and give back the RBUF element. + */ + .begin + .reg element + .reg xfer_size + .reg temp + .sig copy_sig + + alu_shf[element, 0x7f, and, $rsw0, >>24] + alu_shf[xfer_size, 0xff, and, $rsw0, >>16] + + alu[xfer_size, xfer_size, -, 1] + alu_shf[xfer_size, 0x10, or, xfer_size, >>3] + alu_shf[temp, 0x10, or, xfer_size, <<21] + alu_shf[temp, temp, or, element, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + + alu[temp, RBUF_ELEMENT_DONE, or, element, <<16] + msf[fast_wr, --, temp, 0] + .end + + /* + * If EOP, write back the packet descriptor. + */ + .begin + .reg write $stemp $stemp2 + .xfer_order $stemp $stemp2 + .sig zzz + + alu_shf[--, 1, and, $rsw0, >>14] + beq[no_writeback#] + + alu[$stemp, $rsw0, and, 0x1f] + alu[$stemp2, --, b, _packet_length] + sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz] + + no_writeback#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If EOP, put the buffer back onto the scratch ring. + */ + .begin + .reg write $stemp + .sig zzz + + br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#] + + alu_shf[--, 1, and, $rsw0, >>14] + beq[mpacket_receive_loop#] + + alu[--, 1, and, $rsw0, >>10] + bne[rxerr#] + + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_receive_loop#] + + rxerr#: + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz] + br[mpacket_receive_loop#] + .end + .end + + +abort_rswerr#: + halt + +abort_proterr#: + halt + +state_corrupted#: + halt + +buffer_overflow#: + halt + +rx_done_ring_overflow#: + halt + + diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ixp2000/ixp2400_rx.ucode new file mode 100644 index 000000000000..e8aee2f81aad --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_rx.ucode @@ -0,0 +1,130 @@ +static struct ixp2000_uengine_code ixp2400_rx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 109, + .insns = (u8 []) { + 0xf0, 0x00, 0x0c, 0xc0, 0x05, + 0xf4, 0x44, 0x0c, 0x00, 0x05, + 0xfc, 0x04, 0x4c, 0x00, 0x00, + 0xf0, 0x00, 0x00, 0x3b, 0x00, + 0xb4, 0x40, 0xf0, 0x3b, 0x1f, + 0x8a, 0xc0, 0x50, 0x3e, 0x05, + 0xb4, 0x40, 0xf0, 0x3b, 0x80, + 0x9a, 0xe0, 0x00, 0x3e, 0x05, + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x05, 0xc0, 0x00, 0x11, + 0xf0, 0x00, 0x00, 0x0f, 0x00, + 0x91, 0xb0, 0x20, 0x0e, 0x00, + 0xfc, 0x06, 0x60, 0x0b, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x00, + 0xb0, 0xc0, 0x30, 0x0f, 0x01, + 0xa4, 0x70, 0x00, 0x0f, 0x20, + 0xd8, 0x02, 0xc0, 0x01, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0x3d, 0x00, 0x04, 0x03, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x10, + 0x84, 0x82, 0x02, 0x01, 0x3b, + 0xd8, 0x1a, 0x00, 0x01, 0x01, + 0xb4, 0x00, 0x8c, 0x7d, 0x80, + 0x91, 0xb0, 0x80, 0x22, 0x00, + 0xfc, 0x06, 0x60, 0x23, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0x94, 0xf0, 0x92, 0x01, 0x21, + 0xac, 0x40, 0x60, 0x26, 0x00, + 0xa4, 0x30, 0x0c, 0x04, 0x06, + 0xd8, 0x1a, 0x40, 0x01, 0x00, + 0x94, 0xe0, 0xa2, 0x01, 0x21, + 0xac, 0x20, 0x00, 0x28, 0x06, + 0x84, 0xf2, 0x02, 0x01, 0x21, + 0xd8, 0x0b, 0x40, 0x01, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x01, + 0xf0, 0x00, 0x0c, 0x02, 0x02, + 0xa0, 0x00, 0x08, 0x04, 0x00, + 0x95, 0x00, 0xc6, 0x01, 0xff, + 0xa0, 0x80, 0x10, 0x30, 0x00, + 0xa0, 0x60, 0x1c, 0x00, 0x01, + 0xf0, 0x0f, 0xf0, 0x33, 0xff, + 0xb4, 0x00, 0xc0, 0x31, 0x81, + 0xb0, 0x80, 0xb0, 0x32, 0x02, + 0xa0, 0x20, 0x20, 0x2c, 0x00, + 0x94, 0xf0, 0xd2, 0x01, 0x21, + 0xd8, 0x0f, 0x40, 0x01, 0x00, + 0x19, 0x40, 0x10, 0x04, 0x20, + 0xa0, 0x00, 0x26, 0x04, 0x00, + 0xd8, 0x0d, 0xc0, 0x01, 0x00, + 0x00, 0x42, 0x10, 0x80, 0x02, + 0xb0, 0x00, 0x46, 0x04, 0x00, + 0xb0, 0x00, 0x56, 0x08, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0x84, 0xf0, 0x32, 0x01, 0x21, + 0xd8, 0x11, 0x40, 0x01, 0x00, + 0xa0, 0x60, 0x3c, 0x00, 0x02, + 0xa0, 0x20, 0x40, 0x10, 0x00, + 0xa0, 0x20, 0x50, 0x14, 0x00, + 0xd8, 0x12, 0x00, 0x00, 0x18, + 0xa0, 0x00, 0x28, 0x0c, 0x00, + 0xb0, 0x00, 0x48, 0x10, 0x00, + 0xb0, 0x00, 0x58, 0x14, 0x00, + 0xaa, 0xf0, 0x00, 0x14, 0x01, + 0xd8, 0x1a, 0xc0, 0x01, 0x05, + 0x85, 0x80, 0x42, 0x01, 0xff, + 0x95, 0x00, 0x66, 0x01, 0xff, + 0xba, 0xc0, 0x60, 0x1b, 0x01, + 0x9a, 0x30, 0x60, 0x19, 0x30, + 0x9a, 0xb0, 0x70, 0x1a, 0x30, + 0x9b, 0x50, 0x78, 0x1e, 0x04, + 0x8a, 0xe2, 0x08, 0x1e, 0x21, + 0x6a, 0x4e, 0x00, 0x13, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9b, 0x00, 0x7a, 0x92, 0x04, + 0x3d, 0x00, 0x04, 0x1f, 0x20, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x16, 0x80, 0x01, 0x00, + 0xa4, 0x18, 0x0c, 0x7d, 0x80, + 0xa0, 0x58, 0x1c, 0x00, 0x01, + 0x01, 0x42, 0x00, 0xa0, 0x02, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xd8, 0x1b, 0x00, 0xc2, 0x14, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x05, 0xc0, 0x01, 0x00, + 0x84, 0xa2, 0x02, 0x01, 0x21, + 0xd8, 0x19, 0x40, 0x01, 0x01, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x24, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ixp2000/ixp2400_tx.uc new file mode 100644 index 000000000000..d090d1884fb7 --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_tx.uc @@ -0,0 +1,272 @@ +/* + * TX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one TBUF partition is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The TBUF uses 64-byte mpackets. + * - TX descriptors reside in SRAM, and have the following format: + * struct tx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 pkt_length; + * u32 channel; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 2 is tx_pending. + * - Scratch ring 3 is tx_done, and has status condition 'full'. + * - This code is run on all eight threads of the microengine it runs on. + */ + +#define TX_SEQUENCE_0 0x0060 +#define TBUF_CTRL 0x1800 + +#define PARTITION_SIZE 128 +#define PARTITION_THRESH 96 + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .reg @old_tx_seq_0 + .reg @mpkts_in_flight + .reg @next_tbuf_mpacket + + .reg @buffer_handle + .reg @buffer_start + .reg @packet_length + .reg @channel + .reg @packet_offset + + .reg zero + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_tx_loop#] + .end + + /* + * Wait until all pending TBUF elements have been transmitted. + */ + .begin + .reg read $tx + .sig zzz + + loop_empty#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + alu_shf[--, --, b, $tx, >>31] + beq[loop_empty#] + + alu[@old_tx_seq_0, --, b, $tx] + .end + + immed[@mpkts_in_flight, 0] + alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)] + + immed[@buffer_handle, 0] + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_tx_loop#: + .begin + .reg tbuf_element_index + .reg buffer_handle + .reg sop_eop + .reg packet_data + .reg channel + .reg mpacket_size + + /* + * If there is no packet currently being transmitted, + * dequeue the next TX descriptor, and fetch the buffer + * address, packet length and destination channel number. + */ + .begin + .reg read $stemp $stemp2 $stemp3 + .xfer_order $stemp $stemp2 $stemp3 + .sig zzz + + ctx_arb[sig1] + + alu[--, --, b, @buffer_handle] + bne[already_got_packet#] + + tx_nobufs#: + scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz] + alu[@buffer_handle, --, b, $stemp] + beq[tx_nobufs#] + + sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz] + alu[@buffer_start, --, b, $stemp] + alu[@packet_length, --, b, $stemp2] + beq[zero_byte_packet#] + alu[@channel, --, b, $stemp3] + immed[@packet_offset, 0] + + already_got_packet#: + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + .end + + /* + * Determine tbuf element index, SOP/EOP flags, mpacket + * offset and mpacket size and cache buffer_handle and + * channel number. + */ + .begin + alu[tbuf_element_index, --, b, @next_tbuf_mpacket] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and, + (PARTITION_SIZE - 1)] + + alu[buffer_handle, --, b, @buffer_handle] + immed[@buffer_handle, 0] + + immed[sop_eop, 1] + + alu[packet_data, --, b, @packet_offset] + bne[no_sop#] + alu[sop_eop, sop_eop, or, 2] + no_sop#: + alu[packet_data, packet_data, +, @buffer_start] + + alu[channel, --, b, @channel] + + alu[mpacket_size, @packet_length, -, @packet_offset] + alu[--, 64, -, mpacket_size] + bhs[eop#] + alu[@buffer_handle, --, b, buffer_handle] + immed[mpacket_size, 64] + alu[sop_eop, sop_eop, and, 2] + eop#: + + alu[@packet_offset, @packet_offset, +, mpacket_size] + .end + + /* + * Wait until there's enough space in the TBUF. + */ + .begin + .reg read $tx + .reg temp + .sig zzz + + ctx_arb[sig2] + + br[test_space#] + + loop_space#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + + alu[temp, $tx, -, @old_tx_seq_0] + alu[temp, temp, and, 0xff] + alu[@mpkts_in_flight, @mpkts_in_flight, -, temp] + + alu[@old_tx_seq_0, --, b, $tx] + + test_space#: + alu[--, PARTITION_THRESH, -, @mpkts_in_flight] + blo[loop_space#] + + alu[@mpkts_in_flight, @mpkts_in_flight, +, 1] + + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Copy the packet data to the TBUF. + */ + .begin + .reg temp + .sig copy_sig + + alu[temp, mpacket_size, -, 1] + alu_shf[temp, 0x10, or, temp, >>3] + alu_shf[temp, 0x10, or, temp, <<21] + alu_shf[temp, temp, or, tbuf_element_index, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[tbuf_wr, --, packet_data, 0, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + .end + + /* + * Mark TBUF element as ready-to-be-transmitted. + */ + .begin + .reg write $tsw $tsw2 + .xfer_order $tsw $tsw2 + .reg temp + .sig zzz + + alu_shf[temp, channel, or, mpacket_size, <<24] + alu_shf[$tsw, temp, or, sop_eop, <<8] + immed[$tsw2, 0] + + immed[temp, TBUF_CTRL] + alu_shf[temp, temp, or, tbuf_element_index, <<3] + msf[write, $tsw, temp, 0, 2], ctx_swap[zzz] + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If this was an EOP mpacket, recycle the TX buffer + * and signal the host. + */ + .begin + .reg write $stemp + .sig zzz + + alu[--, sop_eop, and, 1] + beq[mpacket_tx_loop#] + + tx_done_ring_full#: + br_inp_state[SCR_Ring3_Status, tx_done_ring_full#] + + alu[$stemp, --, b, buffer_handle] + scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_tx_loop#] + .end + .end + + +zero_byte_packet#: + halt + + diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ixp2000/ixp2400_tx.ucode new file mode 100644 index 000000000000..a433e24b0a51 --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_tx.ucode @@ -0,0 +1,98 @@ +static struct ixp2000_uengine_code ixp2400_tx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 77, + .insns = (u8 []) { + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x03, 0x00, 0x00, 0x11, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0x81, 0xf2, 0x02, 0x01, 0x00, + 0xd8, 0x00, 0x80, 0x01, 0x00, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0x80, + 0xb4, 0x49, 0x02, 0x03, 0x7f, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xa0, 0x30, 0x02, 0x80, 0x00, + 0xd8, 0x06, 0x00, 0x01, 0x01, + 0x19, 0x40, 0x00, 0x04, 0x28, + 0xb0, 0x0a, 0x06, 0x00, 0x00, + 0xd8, 0x03, 0xc0, 0x01, 0x00, + 0x00, 0x44, 0x00, 0x80, 0x80, + 0xa0, 0x09, 0x06, 0x00, 0x00, + 0xb0, 0x0b, 0x06, 0x04, 0x00, + 0xd8, 0x13, 0x00, 0x01, 0x00, + 0xb0, 0x0c, 0x06, 0x08, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0xa0, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0xa0, 0x00, 0x12, 0x40, 0x00, + 0xb0, 0xc9, 0x02, 0x43, 0x01, + 0xb4, 0x49, 0x02, 0x43, 0x7f, + 0xb0, 0x00, 0x22, 0x80, 0x00, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xf0, 0x00, 0x0c, 0x04, 0x02, + 0xb0, 0x40, 0x6c, 0x00, 0xa0, + 0xd8, 0x08, 0x80, 0x01, 0x01, + 0xaa, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0xc0, 0x30, 0x18, 0x90, + 0xa0, 0x00, 0x43, 0x00, 0x00, + 0xba, 0xc0, 0x32, 0xc0, 0xa0, + 0xaa, 0xb0, 0x00, 0x0f, 0x40, + 0xd8, 0x0a, 0x80, 0x01, 0x04, + 0xb0, 0x0a, 0x00, 0x08, 0x00, + 0xf0, 0x00, 0x00, 0x0f, 0x40, + 0xa4, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0x8a, 0x00, 0x0c, 0xa0, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xd8, 0x0c, 0x80, 0x00, 0x18, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0xba, 0x80, 0x42, 0x01, 0x80, + 0xb4, 0x40, 0x40, 0x13, 0xff, + 0xaa, 0x88, 0x00, 0x10, 0x80, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xaa, 0xf0, 0x0d, 0x80, 0x80, + 0xd8, 0x0b, 0x40, 0x01, 0x05, + 0xa0, 0x88, 0x0c, 0x04, 0x80, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0xba, 0xc0, 0x50, 0x0f, 0x01, + 0x9a, 0x30, 0x50, 0x15, 0x30, + 0x9a, 0xb0, 0x50, 0x16, 0x30, + 0x9b, 0x50, 0x58, 0x16, 0x01, + 0x8a, 0xe2, 0x08, 0x16, 0x21, + 0x6b, 0x4e, 0x00, 0x83, 0x03, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9a, 0x80, 0x70, 0x0e, 0x04, + 0x8b, 0x88, 0x08, 0x1e, 0x02, + 0xf0, 0x00, 0x0c, 0x01, 0x81, + 0xf0, 0x01, 0x80, 0x1f, 0x00, + 0x9b, 0xd0, 0x78, 0x1e, 0x01, + 0x3d, 0x42, 0x00, 0x1c, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xa4, 0x30, 0x0c, 0x04, 0x02, + 0xd8, 0x03, 0x00, 0x01, 0x00, + 0xd8, 0x11, 0xc1, 0x42, 0x14, + 0xa0, 0x18, 0x00, 0x08, 0x00, + 0x1a, 0x40, 0x00, 0x04, 0x2c, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x03, 0x00, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c new file mode 100644 index 000000000000..09f03f493bea --- /dev/null +++ b/drivers/net/ixp2000/ixpdev.c @@ -0,0 +1,421 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <asm/arch/uengine.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include "ixp2400_rx.ucode" +#include "ixp2400_tx.ucode" +#include "ixpdev_priv.h" +#include "ixpdev.h" + +#define DRV_MODULE_VERSION "0.2" + +static int nds_count; +static struct net_device **nds; +static int nds_open; +static void (*set_port_admin_status)(int port, int up); + +static struct ixpdev_rx_desc * const rx_desc = + (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE); +static struct ixpdev_tx_desc * const tx_desc = + (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE); +static int tx_pointer; + + +static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + struct ixpdev_tx_desc *desc; + int entry; + + if (unlikely(skb->len > PAGE_SIZE)) { + /* @@@ Count drops. */ + dev_kfree_skb(skb); + return 0; + } + + entry = tx_pointer; + tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT; + + desc = tx_desc + entry; + desc->pkt_length = skb->len; + desc->channel = ip->channel; + + skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr)); + dev_kfree_skb(skb); + + ixp2000_reg_write(RING_TX_PENDING, + TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc))); + + dev->trans_start = jiffies; + + local_irq_disable(); + ip->tx_queue_entries++; + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + netif_stop_queue(dev); + local_irq_enable(); + + return 0; +} + + +static int ixpdev_rx(struct net_device *dev, int *budget) +{ + while (*budget > 0) { + struct ixpdev_rx_desc *desc; + struct sk_buff *skb; + void *buf; + u32 _desc; + + _desc = ixp2000_reg_read(RING_RX_DONE); + if (_desc == 0) + return 0; + + desc = rx_desc + + ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc)); + buf = phys_to_virt(desc->buf_addr); + + if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) { + printk(KERN_ERR "ixp2000: rx err, length %d\n", + desc->pkt_length); + goto err; + } + + if (desc->channel < 0 || desc->channel >= nds_count) { + printk(KERN_ERR "ixp2000: rx err, channel %d\n", + desc->channel); + goto err; + } + + /* @@@ Make FCS stripping configurable. */ + desc->pkt_length -= 4; + + if (unlikely(!netif_running(nds[desc->channel]))) + goto err; + + skb = dev_alloc_skb(desc->pkt_length + 2); + if (likely(skb != NULL)) { + skb->dev = nds[desc->channel]; + skb_reserve(skb, 2); + eth_copy_and_sum(skb, buf, desc->pkt_length, 0); + skb_put(skb, desc->pkt_length); + skb->protocol = eth_type_trans(skb, skb->dev); + + skb->dev->last_rx = jiffies; + + netif_receive_skb(skb); + } + +err: + ixp2000_reg_write(RING_RX_PENDING, _desc); + dev->quota--; + (*budget)--; + } + + return 1; +} + +/* dev always points to nds[0]. */ +static int ixpdev_poll(struct net_device *dev, int *budget) +{ + /* @@@ Have to stop polling when nds[0] is administratively + * downed while we are polling. */ + do { + ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff); + + if (ixpdev_rx(dev, budget)) + return 1; + } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff); + + netif_rx_complete(dev); + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff); + + return 0; +} + +static void ixpdev_tx_complete(void) +{ + int channel; + u32 wake; + + wake = 0; + while (1) { + struct ixpdev_priv *ip; + u32 desc; + int entry; + + desc = ixp2000_reg_read(RING_TX_DONE); + if (desc == 0) + break; + + /* @@@ Check whether entries come back in order. */ + entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc); + channel = tx_desc[entry].channel; + + if (channel < 0 || channel >= nds_count) { + printk(KERN_ERR "ixp2000: txcomp channel index " + "out of bounds (%d, %.8i, %d)\n", + channel, (unsigned int)desc, entry); + continue; + } + + ip = netdev_priv(nds[channel]); + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + wake |= 1 << channel; + ip->tx_queue_entries--; + } + + for (channel = 0; wake != 0; channel++) { + if (wake & (1 << channel)) { + netif_wake_queue(nds[channel]); + wake &= ~(1 << channel); + } + } +} + +static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 status; + + status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0); + if (status == 0) + return IRQ_NONE; + + /* + * Any of the eight receive units signaled RX? + */ + if (status & 0x00ff) { + ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); + if (likely(__netif_rx_schedule_prep(nds[0]))) { + __netif_rx_schedule(nds[0]); + } else { + printk(KERN_CRIT "ixp2000: irq while polling!!\n"); + } + } + + /* + * Any of the eight transmit units signaled TXdone? + */ + if (status & 0xff00) { + ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00); + ixpdev_tx_complete(); + } + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void ixpdev_poll_controller(struct net_device *dev) +{ + disable_irq(IRQ_IXP2000_THDA0); + ixpdev_interrupt(IRQ_IXP2000_THDA0, dev, NULL); + enable_irq(IRQ_IXP2000_THDA0); +} +#endif + +static int ixpdev_open(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + int err; + + if (!nds_open++) { + err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt, + SA_SHIRQ, "ixp2000_eth", nds); + if (err) { + nds_open--; + return err; + } + + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff); + } + + set_port_admin_status(ip->channel, 1); + netif_start_queue(dev); + + return 0; +} + +static int ixpdev_close(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + netif_stop_queue(dev); + set_port_admin_status(ip->channel, 0); + + if (!--nds_open) { + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff); + free_irq(IRQ_IXP2000_THDA0, nds); + } + + return 0; +} + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv) +{ + struct net_device *dev; + struct ixpdev_priv *ip; + + dev = alloc_etherdev(sizeof_priv); + if (dev == NULL) + return NULL; + + dev->hard_start_xmit = ixpdev_xmit; + dev->poll = ixpdev_poll; + dev->open = ixpdev_open; + dev->stop = ixpdev_close; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = ixpdev_poll_controller; +#endif + + dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; + dev->weight = 64; + + ip = netdev_priv(dev); + ip->channel = channel; + ip->tx_queue_entries = 0; + + return dev; +} + +int ixpdev_init(int __nds_count, struct net_device **__nds, + void (*__set_port_admin_status)(int port, int up)) +{ + int i; + int err; + + if (RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192) { + static void __too_many_rx_or_tx_buffers(void); + __too_many_rx_or_tx_buffers(); + } + + printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION); + + nds_count = __nds_count; + nds = __nds; + set_port_admin_status = __set_port_admin_status; + + for (i = 0; i < RX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + goto err_out; + } + rx_desc[i].buf_addr = virt_to_phys(buf); + rx_desc[i].buf_length = PAGE_SIZE; + } + + /* @@@ Maybe we shouldn't be preallocating TX buffers. */ + for (i = 0; i < TX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + goto err_free_rx; + } + tx_desc[i].buf_addr = virt_to_phys(buf); + } + + /* 256 entries, ring status set means 'empty', base address 0x0000. */ + ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000); + ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0400. */ + ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400); + ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000); + + for (i = 0; i < RX_BUF_COUNT; i++) { + ixp2000_reg_write(RING_RX_PENDING, + RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc))); + } + + ixp2000_uengine_load(0, &ixp2400_rx); + ixp2000_uengine_start_contexts(0, 0xff); + + /* 256 entries, ring status set means 'empty', base address 0x0800. */ + ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800); + ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0c00. */ + ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00); + ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000); + + ixp2000_uengine_load(1, &ixp2400_tx); + ixp2000_uengine_start_contexts(1, 0xff); + + for (i = 0; i < nds_count; i++) { + err = register_netdev(nds[i]); + if (err) { + while (--i >= 0) + unregister_netdev(nds[i]); + goto err_free_tx; + } + } + + for (i = 0; i < nds_count; i++) { + printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), " + "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", nds[i]->name, i, + nds[i]->dev_addr[0], nds[i]->dev_addr[1], + nds[i]->dev_addr[2], nds[i]->dev_addr[3], + nds[i]->dev_addr[4], nds[i]->dev_addr[5]); + } + + return 0; + +err_free_tx: + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + +err_free_rx: + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + +err_out: + return err; +} + +void ixpdev_deinit(void) +{ + int i; + + /* @@@ Flush out pending packets. */ + + for (i = 0; i < nds_count; i++) + unregister_netdev(nds[i]); + + ixp2000_uengine_stop_contexts(1, 0xff); + ixp2000_uengine_stop_contexts(0, 0xff); + ixp2000_uengine_reset(0x3); + + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); +} diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ixp2000/ixpdev.h new file mode 100644 index 000000000000..bd686cb63058 --- /dev/null +++ b/drivers/net/ixp2000/ixpdev.h @@ -0,0 +1,27 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_H +#define __IXPDEV_H + +struct ixpdev_priv +{ + int channel; + int tx_queue_entries; +}; + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv); +int ixpdev_init(int num_ports, struct net_device **nds, + void (*set_port_admin_status)(int port, int up)); +void ixpdev_deinit(void); + + +#endif diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ixp2000/ixpdev_priv.h new file mode 100644 index 000000000000..86aa08ea0c33 --- /dev/null +++ b/drivers/net/ixp2000/ixpdev_priv.h @@ -0,0 +1,57 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_PRIV_H +#define __IXPDEV_PRIV_H + +#define RX_BUF_DESC_BASE 0x00001000 +#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc))) +#define TX_BUF_DESC_BASE 0x00002000 +#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc))) +#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4) + +#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE) +#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4)) +#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8)) +#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12)) + +#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x))) +#define RING_RX_PENDING_BASE SCRATCH_REG(0x00) +#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04) +#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08) +#define RING_RX_DONE_BASE SCRATCH_REG(0x10) +#define RING_RX_DONE_HEAD SCRATCH_REG(0x14) +#define RING_RX_DONE_TAIL SCRATCH_REG(0x18) +#define RING_TX_PENDING_BASE SCRATCH_REG(0x20) +#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24) +#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28) +#define RING_TX_DONE_BASE SCRATCH_REG(0x30) +#define RING_TX_DONE_HEAD SCRATCH_REG(0x34) +#define RING_TX_DONE_TAIL SCRATCH_REG(0x38) + +struct ixpdev_rx_desc +{ + u32 buf_addr; + u32 buf_length; + u32 channel; + u32 pkt_length; +}; + +struct ixpdev_tx_desc +{ + u32 buf_addr; + u32 pkt_length; + u32 channel; + u32 unused; +}; + + +#endif diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c new file mode 100644 index 000000000000..5c7ab7564053 --- /dev/null +++ b/drivers/net/ixp2000/pm3386.c @@ -0,0 +1,334 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <asm/io.h> +#include "pm3386.h" + +/* + * Read from register 'reg' of PM3386 device 'pm'. + */ +static u16 pm3386_reg_read(int pm, int reg) +{ + void *_reg; + u16 value; + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + value = *((volatile u16 *)(_reg + (reg << 1))); + +// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value); + + return value; +} + +/* + * Write to register 'reg' of PM3386 device 'pm', and perform + * a readback from the identification register. + */ +static void pm3386_reg_write(int pm, int reg, u16 value) +{ + void *_reg; + u16 dummy; + +// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value); + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + *((volatile u16 *)(_reg + (reg << 1))) = value; + + dummy = *((volatile u16 *)_reg); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + +/* + * Read from port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static u16 pm3386_port_reg_read(int port, int _reg, int spacing) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + return pm3386_reg_read(port >> 1, reg); +} + +/* + * Write to port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + pm3386_reg_write(port >> 1, reg, value); +} + + +void pm3386_reset(void) +{ + u8 mac[3][6]; + + /* Save programmed MAC addresses. */ + pm3386_get_mac(0, mac[0]); + pm3386_get_mac(1, mac[1]); + pm3386_get_mac(2, mac[2]); + + /* Assert analog and digital reset. */ + pm3386_reg_write(0, 0x002, 0x0060); + pm3386_reg_write(1, 0x002, 0x0060); + mdelay(1); + + /* Deassert analog reset. */ + pm3386_reg_write(0, 0x002, 0x0062); + pm3386_reg_write(1, 0x002, 0x0062); + mdelay(10); + + /* Deassert digital reset. */ + pm3386_reg_write(0, 0x002, 0x0063); + pm3386_reg_write(1, 0x002, 0x0063); + mdelay(10); + + /* Restore programmed MAC addresses. */ + pm3386_set_mac(0, mac[0]); + pm3386_set_mac(1, mac[1]); + pm3386_set_mac(2, mac[2]); + + /* Disable carrier on all ports. */ + pm3386_set_carrier(0, 0); + pm3386_set_carrier(1, 0); + pm3386_set_carrier(2, 0); +} + +static u16 swaph(u16 x) +{ + return ((x << 8) | (x >> 8)) & 0xffff; +} + +void pm3386_init_port(int port) +{ + int pm = port >> 1; + + /* + * Work around ENP2611 bootloader programming MAC address + * in reverse. + */ + if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 && + (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) { + u16 temp[3]; + + temp[0] = pm3386_port_reg_read(port, 0x308, 0x100); + temp[1] = pm3386_port_reg_read(port, 0x309, 0x100); + temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100); + pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2])); + pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1])); + pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0])); + } + + /* + * Initialise narrowbanding mode. See application note 2010486 + * for more information. (@@@ We also need to issue a reset + * when ROOL or DOOL are detected.) + */ + pm3386_port_reg_write(port, 0x708, 0x10, 0xd055); + udelay(500); + pm3386_port_reg_write(port, 0x708, 0x10, 0x5055); + + /* + * SPI-3 ingress block. Set 64 bytes SPI-3 burst size + * towards SPI-3 bridge. + */ + pm3386_port_reg_write(port, 0x122, 0x20, 0x0002); + + /* + * Enable ingress protocol checking, and soft reset the + * SPI-3 ingress block. + */ + pm3386_reg_write(pm, 0x103, 0x0003); + while (!(pm3386_reg_read(pm, 0x103) & 0x80)) + ; + + /* + * SPI-3 egress block. Gather 12288 bytes of the current + * packet in the TX fifo before initiating transmit on the + * SERDES interface. (Prevents TX underflows.) + */ + pm3386_port_reg_write(port, 0x221, 0x20, 0x0007); + + /* + * Enforce odd parity from the SPI-3 bridge, and soft reset + * the SPI-3 egress block. + */ + pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1))); + while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c) + ; + + /* + * EGMAC block. Set this channels to reject long preambles, + * not send or transmit PAUSE frames, enable preamble checking, + * disable frame length checking, enable FCS appending, enable + * TX frame padding. + */ + pm3386_port_reg_write(port, 0x302, 0x100, 0x0113); + + /* + * Soft reset the EGMAC block. + */ + pm3386_port_reg_write(port, 0x301, 0x100, 0x8000); + pm3386_port_reg_write(port, 0x301, 0x100, 0x0000); + + /* + * Auto-sense autonegotiation status. + */ + pm3386_port_reg_write(port, 0x306, 0x100, 0x0100); + + /* + * Allow reception of jumbo frames. + */ + pm3386_port_reg_write(port, 0x310, 0x100, 9018); + + /* + * Allow transmission of jumbo frames. + */ + pm3386_port_reg_write(port, 0x336, 0x100, 9018); + + /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */ + + /* + * Set autonegotiation parameters to 'no PAUSE, full duplex.' + */ + pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020); + + /* + * Enable and restart autonegotiation. + */ + pm3386_port_reg_write(port, 0x318, 0x100, 0x0003); + pm3386_port_reg_write(port, 0x318, 0x100, 0x0002); +} + +void pm3386_get_mac(int port, u8 *mac) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x308, 0x100); + mac[0] = temp & 0xff; + mac[1] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x309, 0x100); + mac[2] = temp & 0xff; + mac[3] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x30a, 0x100); + mac[4] = temp & 0xff; + mac[5] = (temp >> 8) & 0xff; +} + +void pm3386_set_mac(int port, u8 *mac) +{ + pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]); + pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]); + pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]); +} + +static u32 pm3386_get_stat(int port, u16 base) +{ + u32 value; + + value = pm3386_port_reg_read(port, base, 0x100); + value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16; + + return value; +} + +void pm3386_get_stats(int port, struct net_device_stats *stats) +{ + /* + * Snapshot statistics counters. + */ + pm3386_port_reg_write(port, 0x500, 0x100, 0x0001); + while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001) + ; + + memset(stats, 0, sizeof(*stats)); + + stats->rx_packets = pm3386_get_stat(port, 0x510); + stats->tx_packets = pm3386_get_stat(port, 0x590); + stats->rx_bytes = pm3386_get_stat(port, 0x514); + stats->tx_bytes = pm3386_get_stat(port, 0x594); + /* @@@ Add other stats. */ +} + +void pm3386_set_carrier(int port, int state) +{ + pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000); +} + +int pm3386_is_link_up(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + + return !!(temp & 0x0002); +} + +void pm3386_enable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x1000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_disable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xefff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_enable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x4000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_disable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xbfff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h new file mode 100644 index 000000000000..fe92bb056ac4 --- /dev/null +++ b/drivers/net/ixp2000/pm3386.h @@ -0,0 +1,28 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PM3386_H +#define __PM3386_H + +void pm3386_reset(void); +void pm3386_init_port(int port); +void pm3386_get_mac(int port, u8 *mac); +void pm3386_set_mac(int port, u8 *mac); +void pm3386_get_stats(int port, struct net_device_stats *stats); +void pm3386_set_carrier(int port, int state); +int pm3386_is_link_up(int port); +void pm3386_enable_rx(int port); +void pm3386_disable_rx(int port); +void pm3386_enable_tx(int port); +void pm3386_disable_tx(int port); + + +#endif diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index f857ae94d261..b0c3b6ab6263 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -115,6 +115,7 @@ #include <linux/ethtool.h> #include <linux/timer.h> #include <linux/if_vlan.h> +#include <linux/rtnetlink.h> #include <asm/io.h> #include <asm/uaccess.h> diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index a842ecc60a34..9369f811075d 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -85,7 +85,7 @@ static int pppoe_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) static int pppoe_xmit(struct ppp_channel *chan, struct sk_buff *skb); static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb); -static struct proto_ops pppoe_ops; +static const struct proto_ops pppoe_ops; static DEFINE_RWLOCK(pppoe_hash_lock); static struct ppp_channel_ops pppoe_chan_ops; @@ -383,8 +383,6 @@ static int pppoe_rcv(struct sk_buff *skb, { struct pppoe_hdr *ph; struct pppox_sock *po; - struct sock *sk; - int ret; if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) goto drop; @@ -395,24 +393,8 @@ static int pppoe_rcv(struct sk_buff *skb, ph = (struct pppoe_hdr *) skb->nh.raw; po = get_item((unsigned long) ph->sid, eth_hdr(skb)->h_source); - if (!po) - goto drop; - - sk = sk_pppox(po); - bh_lock_sock(sk); - - /* Socket state is unknown, must put skb into backlog. */ - if (sock_owned_by_user(sk) != 0) { - sk_add_backlog(sk, skb); - ret = NET_RX_SUCCESS; - } else { - ret = pppoe_rcv_core(sk, skb); - } - - bh_unlock_sock(sk); - sock_put(sk); - - return ret; + if (po != NULL) + return sk_receive_skb(sk_pppox(po), skb); drop: kfree_skb(skb); out: @@ -1081,9 +1063,7 @@ static int __init pppoe_proc_init(void) static inline int pppoe_proc_init(void) { return 0; } #endif /* CONFIG_PROC_FS */ -/* ->ioctl are set at pppox_create */ - -static struct proto_ops pppoe_ops = { +static const struct proto_ops pppoe_ops = { .family = AF_PPPOX, .owner = THIS_MODULE, .release = pppoe_release, @@ -1099,7 +1079,8 @@ static struct proto_ops pppoe_ops = { .getsockopt = sock_no_getsockopt, .sendmsg = pppoe_sendmsg, .recvmsg = pppoe_recvmsg, - .mmap = sock_no_mmap + .mmap = sock_no_mmap, + .ioctl = pppox_ioctl, }; static struct pppox_proto pppoe_proto = { diff --git a/drivers/net/pppox.c b/drivers/net/pppox.c index 0c1e114527fb..9315046b3f55 100644 --- a/drivers/net/pppox.c +++ b/drivers/net/pppox.c @@ -68,8 +68,7 @@ EXPORT_SYMBOL(register_pppox_proto); EXPORT_SYMBOL(unregister_pppox_proto); EXPORT_SYMBOL(pppox_unbind_sock); -static int pppox_ioctl(struct socket* sock, unsigned int cmd, - unsigned long arg) +int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { struct sock *sk = sock->sk; struct pppox_sock *po = pppox_sk(sk); @@ -105,6 +104,7 @@ static int pppox_ioctl(struct socket* sock, unsigned int cmd, return rc; } +EXPORT_SYMBOL(pppox_ioctl); static int pppox_create(struct socket *sock, int protocol) { @@ -119,11 +119,7 @@ static int pppox_create(struct socket *sock, int protocol) goto out; rc = pppox_protos[protocol]->create(sock); - if (!rc) { - /* We get to set the ioctl handler. */ - /* For everything else, pppox is just a shell. */ - sock->ops->ioctl = pppox_ioctl; - } + module_put(pppox_protos[protocol]->owner); out: return rc; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 669dd52c412a..89c46787676c 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -66,7 +66,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "Version 2.0.9.3" +#define DRV_VERSION "Version 2.0.9.4" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; @@ -412,7 +412,7 @@ static int init_shared_mem(struct s2io_nic *nic) config->tx_cfg[i].fifo_len - 1; mac_control->fifos[i].fifo_no = i; mac_control->fifos[i].nic = nic; - mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2; for (j = 0; j < page_num; j++) { int k = 0; @@ -459,6 +459,10 @@ static int init_shared_mem(struct s2io_nic *nic) } } + nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL); + if (!nic->ufo_in_band_v) + return -ENOMEM; + /* Allocation and initialization of RXDs in Rings */ size = 0; for (i = 0; i < config->rx_ring_num; i++) { @@ -731,6 +735,8 @@ static void free_shared_mem(struct s2io_nic *nic) mac_control->stats_mem, mac_control->stats_mem_phy); } + if (nic->ufo_in_band_v) + kfree(nic->ufo_in_band_v); } /** @@ -2003,6 +2009,49 @@ static int start_nic(struct s2io_nic *nic) return SUCCESS; } +/** + * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb + */ +static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, int get_off) +{ + nic_t *nic = fifo_data->nic; + struct sk_buff *skb; + TxD_t *txds; + u16 j, frg_cnt; + + txds = txdlp; + if (txds->Host_Control == (u64)(long)nic->ufo_in_band_v) { + pci_unmap_single(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, sizeof(u64), + PCI_DMA_TODEVICE); + txds++; + } + + skb = (struct sk_buff *) ((unsigned long) + txds->Host_Control); + if (!skb) { + memset(txdlp, 0, (sizeof(TxD_t) * fifo_data->max_txds)); + return NULL; + } + pci_unmap_single(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + frg_cnt = skb_shinfo(skb)->nr_frags; + if (frg_cnt) { + txds++; + for (j = 0; j < frg_cnt; j++, txds++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[j]; + if (!txds->Buffer_Pointer) + break; + pci_unmap_page(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, + frag->size, PCI_DMA_TODEVICE); + } + } + txdlp->Host_Control = 0; + return(skb); +} /** * free_tx_buffers - Free all queued Tx buffers @@ -2020,7 +2069,7 @@ static void free_tx_buffers(struct s2io_nic *nic) int i, j; mac_info_t *mac_control; struct config_param *config; - int cnt = 0, frg_cnt; + int cnt = 0; mac_control = &nic->mac_control; config = &nic->config; @@ -2029,38 +2078,11 @@ static void free_tx_buffers(struct s2io_nic *nic) for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) { txdp = (TxD_t *) mac_control->fifos[i].list_info[j]. list_virt_addr; - skb = - (struct sk_buff *) ((unsigned long) txdp-> - Host_Control); - if (skb == NULL) { - memset(txdp, 0, sizeof(TxD_t) * - config->max_txds); - continue; - } - frg_cnt = skb_shinfo(skb)->nr_frags; - pci_unmap_single(nic->pdev, (dma_addr_t) - txdp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp; - temp = txdp; - txdp++; - for (j = 0; j < frg_cnt; j++, txdp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdp = temp; + skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j); + if (skb) { + dev_kfree_skb(skb); + cnt++; } - dev_kfree_skb(skb); - memset(txdp, 0, sizeof(TxD_t) * config->max_txds); - cnt++; } DBG_PRINT(INTR_DBG, "%s:forcibly freeing %d skbs on FIFO%d\n", @@ -2661,7 +2683,6 @@ static void tx_intr_handler(fifo_info_t *fifo_data) tx_curr_get_info_t get_info, put_info; struct sk_buff *skb; TxD_t *txdlp; - u16 j, frg_cnt; get_info = fifo_data->tx_curr_get_info; put_info = fifo_data->tx_curr_put_info; @@ -2684,8 +2705,7 @@ to loss of link\n"); } } - skb = (struct sk_buff *) ((unsigned long) - txdlp->Host_Control); + skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset); if (skb == NULL) { DBG_PRINT(ERR_DBG, "%s: Null skb ", __FUNCTION__); @@ -2693,34 +2713,6 @@ to loss of link\n"); return; } - frg_cnt = skb_shinfo(skb)->nr_frags; - nic->tx_pkt_count++; - - pci_unmap_single(nic->pdev, (dma_addr_t) - txdlp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp; - temp = txdlp; - txdlp++; - for (j = 0; j < frg_cnt; j++, txdlp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - if (!txdlp->Buffer_Pointer) - break; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdlp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdlp = temp; - } - memset(txdlp, 0, - (sizeof(TxD_t) * fifo_data->max_txds)); - /* Updating the statistics block */ nic->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); @@ -3331,7 +3323,7 @@ failed\n", dev->name); s2io_msix_fifo_handle, 0, sp->desc1, sp->s2io_entries[i].arg); DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, - sp->msix_info[i].addr); + (unsigned long long)sp->msix_info[i].addr); } else { sprintf(sp->desc2, "%s:MSI-X-%d-RX", dev->name, i); @@ -3339,7 +3331,7 @@ failed\n", dev->name); s2io_msix_ring_handle, 0, sp->desc2, sp->s2io_entries[i].arg); DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, - sp->msix_info[i].addr); + (unsigned long long)sp->msix_info[i].addr); } if (err) { DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ @@ -3527,6 +3519,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } + txdp->Control_1 = 0; + txdp->Control_2 = 0; #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; if (mss) { @@ -3534,19 +3528,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_TCP_LSO_MSS(mss); } #endif - - frg_cnt = skb_shinfo(skb)->nr_frags; - frg_len = skb->len - skb->data_len; - - txdp->Buffer_Pointer = pci_map_single - (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); - txdp->Host_Control = (unsigned long) skb; if (skb->ip_summed == CHECKSUM_HW) { txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN | TXD_TX_CKO_UDP_EN); } - + txdp->Control_1 |= TXD_GATHER_CODE_FIRST; + txdp->Control_1 |= TXD_LIST_OWN_XENA; txdp->Control_2 |= config->tx_intr_type; if (sp->vlgrp && vlan_tx_tag_present(skb)) { @@ -3554,10 +3542,40 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); } - txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | - TXD_GATHER_CODE_FIRST); - txdp->Control_1 |= TXD_LIST_OWN_XENA; + frg_len = skb->len - skb->data_len; + if (skb_shinfo(skb)->ufo_size) { + int ufo_size; + + ufo_size = skb_shinfo(skb)->ufo_size; + ufo_size &= ~7; + txdp->Control_1 |= TXD_UFO_EN; + txdp->Control_1 |= TXD_UFO_MSS(ufo_size); + txdp->Control_1 |= TXD_BUFFER0_SIZE(8); +#ifdef __BIG_ENDIAN + sp->ufo_in_band_v[put_off] = + (u64)skb_shinfo(skb)->ip6_frag_id; +#else + sp->ufo_in_band_v[put_off] = + (u64)skb_shinfo(skb)->ip6_frag_id << 32; +#endif + txdp->Host_Control = (unsigned long)sp->ufo_in_band_v; + txdp->Buffer_Pointer = pci_map_single(sp->pdev, + sp->ufo_in_band_v, + sizeof(u64), PCI_DMA_TODEVICE); + txdp++; + txdp->Control_1 = 0; + txdp->Control_2 = 0; + } + + txdp->Buffer_Pointer = pci_map_single + (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); + txdp->Host_Control = (unsigned long) skb; + txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); + if (skb_shinfo(skb)->ufo_size) + txdp->Control_1 |= TXD_UFO_EN; + + frg_cnt = skb_shinfo(skb)->nr_frags; /* For fragmented SKB. */ for (i = 0; i < frg_cnt; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; @@ -3569,9 +3587,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) (sp->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size); + if (skb_shinfo(skb)->ufo_size) + txdp->Control_1 |= TXD_UFO_EN; } txdp->Control_1 |= TXD_GATHER_CODE_LAST; + if (skb_shinfo(skb)->ufo_size) + frg_cnt++; /* as Txd0 was used for inband header */ + tx_fifo = mac_control->tx_FIFO_start[queue]; val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); @@ -3583,6 +3606,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) if (mss) val64 |= TX_FIFO_SPECIAL_FUNC; #endif + if (skb_shinfo(skb)->ufo_size) + val64 |= TX_FIFO_SPECIAL_FUNC; writeq(val64, &tx_fifo->List_Control); mmiowb(); @@ -4721,7 +4746,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) fail = 1; if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " + "Data written %llx Data read %llx\n", + dev->name, (unsigned long long)0x12345, + (unsigned long long)ret_data); fail = 1; } @@ -4740,7 +4768,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) fail = 1; if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " + "Data written %llx Data read %llx\n", + dev->name, (unsigned long long)0x12345, + (unsigned long long)ret_data); fail = 1; } @@ -5190,6 +5221,8 @@ static struct ethtool_ops netdev_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, #endif + .get_ufo = ethtool_op_get_ufo, + .set_ufo = ethtool_op_set_ufo, .self_test_count = s2io_ethtool_self_test_count, .self_test = s2io_ethtool_test, .get_strings = s2io_ethtool_get_strings, @@ -5941,7 +5974,8 @@ Defaulting to INTA\n"); break; } } - config->max_txds = MAX_SKB_FRAGS + 1; + /* + 2 because one Txd for skb->data and one Txd for UFO */ + config->max_txds = MAX_SKB_FRAGS + 2; /* Rx side parameters. */ if (rx_ring_sz[0] == 0) @@ -6035,6 +6069,10 @@ Defaulting to INTA\n"); #ifdef NETIF_F_TSO dev->features |= NETIF_F_TSO; #endif + if (sp->device_type & XFRAME_II_DEVICE) { + dev->features |= NETIF_F_UFO; + dev->features |= NETIF_F_HW_CSUM; + } dev->tx_timeout = &s2io_tx_watchdog; dev->watchdog_timeo = WATCH_DOG_TIMEOUT; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 419aad7f10e7..852a6a899d07 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -393,7 +393,9 @@ typedef struct _TxD { #define TXD_GATHER_CODE_LAST BIT(23) #define TXD_TCP_LSO_EN BIT(30) #define TXD_UDP_COF_EN BIT(31) +#define TXD_UFO_EN BIT(31) | BIT(30) #define TXD_TCP_LSO_MSS(val) vBIT(val,34,14) +#define TXD_UFO_MSS(val) vBIT(val,34,14) #define TXD_BUFFER0_SIZE(val) vBIT(val,48,16) u64 Control_2; @@ -789,6 +791,7 @@ struct s2io_nic { spinlock_t rx_lock; atomic_t isr_cnt; + u64 *ufo_in_band_v; }; #define RESET_ERROR 1; diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 1d4d88680db1..3d95fa20cd88 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1,6 +1,6 @@ /* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. Copyright 1999 Silicon Integrated System Corporation - Revision: 1.08.08 Jan. 22 2005 + Revision: 1.08.09 Sep. 19 2005 Modified from the driver which is originally written by Donald Becker. @@ -17,6 +17,7 @@ SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, preliminary Rev. 1.0 Jan. 18, 1998 + Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages Rev 1.08.07 Nov. 2 2003 Daniele Venzano <webvenza@libero.it> add suspend/resume support Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support @@ -76,7 +77,7 @@ #include "sis900.h" #define SIS900_MODULE_NAME "sis900" -#define SIS900_DRV_VERSION "v1.08.08 Jan. 22 2005" +#define SIS900_DRV_VERSION "v1.08.09 Sep. 19 2005" static char version[] __devinitdata = KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n"; @@ -538,6 +539,11 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev, printk("%2.2x:", (u8)net_dev->dev_addr[i]); printk("%2.2x.\n", net_dev->dev_addr[i]); + /* Detect Wake on Lan support */ + ret = inl(CFGPMC & PMESP); + if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0) + printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); + return 0; err_unmap_rx: @@ -2015,6 +2021,67 @@ static int sis900_nway_reset(struct net_device *net_dev) return mii_nway_restart(&sis_priv->mii_info); } +/** + * sis900_set_wol - Set up Wake on Lan registers + * @net_dev: the net device to probe + * @wol: container for info passed to the driver + * + * Process ethtool command "wol" to setup wake on lan features. + * SiS900 supports sending WoL events if a correct packet is received, + * but there is no simple way to filter them to only a subset (broadcast, + * multicast, unicast or arp). + */ + +static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + struct sis900_private *sis_priv = net_dev->priv; + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 cfgpmcsr = 0, pmctrl_bits = 0; + + if (wol->wolopts == 0) { + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= ~PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + outl(pmctrl_bits, pmctrl_addr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); + return 0; + } + + if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST + | WAKE_BCAST | WAKE_ARP)) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + pmctrl_bits |= MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pmctrl_bits |= LINKON; + + outl(pmctrl_bits, pmctrl_addr); + + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); + + return 0; +} + +static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 pmctrl_bits; + + pmctrl_bits = inl(pmctrl_addr); + if (pmctrl_bits & MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pmctrl_bits & LINKON) + wol->wolopts |= WAKE_PHY; + + wol->supported = (WAKE_PHY | WAKE_MAGIC); +} + static struct ethtool_ops sis900_ethtool_ops = { .get_drvinfo = sis900_get_drvinfo, .get_msglevel = sis900_get_msglevel, @@ -2023,6 +2090,8 @@ static struct ethtool_ops sis900_ethtool_ops = { .get_settings = sis900_get_settings, .set_settings = sis900_set_settings, .nway_reset = sis900_nway_reset, + .get_wol = sis900_get_wol, + .set_wol = sis900_set_wol }; /** diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h index de3c06735d15..4233ea55670f 100644 --- a/drivers/net/sis900.h +++ b/drivers/net/sis900.h @@ -33,6 +33,7 @@ enum sis900_registers { rxcfg=0x34, //Receive Configuration Register flctrl=0x38, //Flow Control Register rxlen=0x3c, //Receive Packet Length Register + cfgpmcsr=0x44, //Configuration Power Management Control/Status Register rfcr=0x48, //Receive Filter Control Register rfdr=0x4C, //Receive Filter Data Register pmctrl=0xB0, //Power Management Control Register @@ -140,6 +141,50 @@ enum sis96x_eeprom_command { EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100 }; +/* PCI Registers */ +enum sis900_pci_registers { + CFGPMC = 0x40, + CFGPMCSR = 0x44 +}; + +/* Power management capabilities bits */ +enum sis900_cfgpmc_register_bits { + PMVER = 0x00070000, + DSI = 0x00100000, + PMESP = 0xf8000000 +}; + +enum sis900_pmesp_bits { + PME_D0 = 0x1, + PME_D1 = 0x2, + PME_D2 = 0x4, + PME_D3H = 0x8, + PME_D3C = 0x10 +}; + +/* Power management control/status bits */ +enum sis900_cfgpmcsr_register_bits { + PMESTS = 0x00004000, + PME_EN = 0x00000100, // Power management enable + PWR_STA = 0x00000003 // Current power state +}; + +/* Wake-on-LAN support. */ +enum sis900_power_management_control_register_bits { + LINKLOSS = 0x00000001, + LINKON = 0x00000002, + MAGICPKT = 0x00000400, + ALGORITHM = 0x00000800, + FRM1EN = 0x00100000, + FRM2EN = 0x00200000, + FRM3EN = 0x00400000, + FRM1ACS = 0x01000000, + FRM2ACS = 0x02000000, + FRM3ACS = 0x04000000, + WAKEALL = 0x40000000, + GATECLK = 0x80000000 +}; + /* Management Data I/O (mdio) frame */ #define MIIread 0x6000 #define MIIwrite 0x5002 diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile index 7653d6e33aa2..afd900d5d730 100644 --- a/drivers/net/sk98lin/Makefile +++ b/drivers/net/sk98lin/Makefile @@ -26,8 +26,7 @@ sk98lin-objs := \ skrlmt.o \ sktimer.o \ skvpd.o \ - skxmac2.o \ - skproc.o + skxmac2.o # DBGDEF = \ # -DDEBUG diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 2dc5728e3ef6..778d9e618ebd 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -60,7 +60,6 @@ extern SK_U64 SkOsGetTime(SK_AC*); extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); -extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32); extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); @@ -268,8 +267,6 @@ typedef struct s_DevNet DEV_NET; struct s_DevNet { int PortNr; int NetNr; - int Mtu; - int Up; SK_AC *pAC; }; @@ -298,6 +295,7 @@ struct s_RxPort { RXD *pRxdRingTail; /* Tail of Rx rings */ RXD *pRxdRingPrev; /* descriptor given to BMU previously */ int RxdRingFree; /* # of free entrys */ + int RxCsum; /* use receive checksum hardware */ spinlock_t RxDesRingLock; /* serialize descriptor accesses */ int RxFillLimit; /* limit for buffers in ring */ SK_IOC HwAddr; /* bmu registers address */ @@ -390,12 +388,10 @@ struct s_AC { SK_IOC IoBase; /* register set of adapter */ int BoardLevel; /* level of active hw init (0-2) */ - char DeviceStr[80]; /* adapter string from vpd */ + SK_U32 AllocFlag; /* flag allocation of resources */ struct pci_dev *PciDev; /* for access to pci config space */ - SK_U32 PciDevId; /* pci device id */ struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ - char Name[30]; /* driver name */ int RxBufSize; /* length of receive buffers */ struct net_device_stats stats; /* linux 'netstat -i' statistics */ @@ -430,7 +426,6 @@ struct s_AC { DIM_INFO DynIrqModInfo; /* all data related to DIM */ /* Only for tests */ - int PortUp; int PortDown; int ChipsetType; /* Chipset family type * 0 == Genesis family support diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h index bdc1a5eaaae9..daa9a8d154fc 100644 --- a/drivers/net/sk98lin/h/skvpd.h +++ b/drivers/net/sk98lin/h/skvpd.h @@ -130,14 +130,12 @@ typedef struct s_vpd_key { #ifndef VPD_DO_IO #define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) #define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) -#define VPD_OUT32(pAC,IoC,Addr,Val) (void)SkPciWriteCfgDWord(pAC,Addr,Val) #define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) #define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) #define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) #else /* VPD_DO_IO */ #define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) #define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) -#define VPD_OUT32(pAC,IoC,Addr,Val) SK_OUT32(IoC,PCI_C(Addr),Val) #define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) #define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) #define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) @@ -155,12 +153,6 @@ typedef struct s_vpd_key { else \ SK_OUT16(pAC,PCI_C(Addr),Val); \ } -#define VPD_OUT32(pAC,Ioc,Addr,Val) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciWriteCfgDWord(pAC,Addr,Val); \ - else \ - SK_OUT32(pAC,PCI_C(Addr),Val); \ - } #define VPD_IN8(pAC,Ioc,Addr,pVal) { \ if ((pAC)->DgT.DgUseCfgCycle) \ SkPciReadCfgByte(pAC,Addr,pVal); \ diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c index b71769ae4603..4265ed91a9c4 100644 --- a/drivers/net/sk98lin/skethtool.c +++ b/drivers/net/sk98lin/skethtool.c @@ -539,6 +539,48 @@ static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *ep return ret ? -EIO : 0; } +/* Only Yukon supports checksum offload. */ +static int setScatterGather(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int setTxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 getRxCsum(struct net_device *dev) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + return pAC->RxPort[pNet->PortNr].RxCsum; +} + +static int setRxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + pAC->RxPort[pNet->PortNr].RxCsum = data != 0; + return 0; +} + struct ethtool_ops SkGeEthtoolOps = { .get_settings = getSettings, .set_settings = setSettings, @@ -551,4 +593,10 @@ struct ethtool_ops SkGeEthtoolOps = { .set_pauseparam = setPauseParams, .get_link = ethtool_op_get_link, .get_perm_addr = ethtool_op_get_perm_addr, + .get_sg = ethtool_op_get_sg, + .set_sg = setScatterGather, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = setTxCsum, + .get_rx_csum = getRxCsum, + .set_rx_csum = setRxCsum, }; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index ae7343934758..9a76ac180b11 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -107,10 +107,10 @@ #include "h/skversion.h" +#include <linux/in.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> -#include <linux/proc_fs.h> #include <linux/dma-mapping.h> #include <linux/ip.h> @@ -206,7 +206,6 @@ static void SkGeSetRxMode(struct SK_NET_DEVICE *dev); static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev); static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd); static void GetConfiguration(SK_AC*); -static void ProductStr(SK_AC*); static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*); static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*); static void FillRxRing(SK_AC*, RX_PORT*); @@ -235,28 +234,6 @@ static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); * Extern Function Prototypes * ******************************************************************************/ -static const char SKRootName[] = "net/sk98lin"; -static struct proc_dir_entry *pSkRootDir; -extern struct file_operations sk_proc_fops; - -static inline void SkGeProcCreate(struct net_device *dev) -{ - struct proc_dir_entry *pe; - - if (pSkRootDir && - (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) { - pe->proc_fops = &sk_proc_fops; - pe->data = dev; - pe->owner = THIS_MODULE; - } -} - -static inline void SkGeProcRemove(struct net_device *dev) -{ - if (pSkRootDir) - remove_proc_entry(dev->name, pSkRootDir); -} - extern void SkDimEnableModerationIfNeeded(SK_AC *pAC); extern void SkDimDisplayModerationSettings(SK_AC *pAC); extern void SkDimStartModerationTimer(SK_AC *pAC); @@ -279,6 +256,27 @@ static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; /***************************************************************************** * + * SkPciWriteCfgDWord - write a 32 bit value to pci config space + * + * Description: + * This routine writes a 32 bit value to the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static inline int SkPciWriteCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 Val) /* pointer to store the read value */ +{ + pci_write_config_dword(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgDWord */ + +/***************************************************************************** + * * SkGeInitPCI - Init the PCI resources * * Description: @@ -300,7 +298,7 @@ int SkGeInitPCI(SK_AC *pAC) dev->mem_start = pci_resource_start (pdev, 0); pci_set_master(pdev); - if (pci_request_regions(pdev, pAC->Name) != 0) { + if (pci_request_regions(pdev, "sk98lin") != 0) { retval = 2; goto out_disable; } @@ -578,10 +576,10 @@ SK_BOOL DualNet; spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); if (pAC->GIni.GIMacsFound == 2) { - Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev); + Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev); } else if (pAC->GIni.GIMacsFound == 1) { Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, - pAC->Name, dev); + "sk98lin", dev); } else { printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n", pAC->GIni.GIMacsFound); @@ -1265,7 +1263,6 @@ struct SK_NET_DEVICE *dev) spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); pAC->MaxPorts++; - pNet->Up = 1; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, @@ -1395,7 +1392,6 @@ struct SK_NET_DEVICE *dev) sizeof(SK_PNMI_STRUCT_DATA)); pAC->MaxPorts--; - pNet->Up = 0; return (0); } /* SkGeClose */ @@ -2175,7 +2171,6 @@ rx_start: pMsg->ip_summed = CHECKSUM_NONE; #endif - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); ForRlmt = SK_RLMT_RX_PROTOCOL; #if 0 @@ -2550,7 +2545,7 @@ unsigned long Flags; static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu) { DEV_NET *pNet; -DEV_NET *pOtherNet; +struct net_device *pOtherDev; SK_AC *pAC; unsigned long Flags; int i; @@ -2580,11 +2575,11 @@ SK_EVPARA EvPara; } #endif - pNet->Mtu = NewMtu; - pOtherNet = netdev_priv(pAC->dev[1 - pNet->NetNr]); - if ((pOtherNet->Mtu>1500) && (NewMtu<=1500) && (pOtherNet->Up==1)) { - return(0); - } + pOtherDev = pAC->dev[1 - pNet->NetNr]; + + if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500) + && (NewMtu <= 1500)) + return 0; pAC->RxBufSize = NewMtu + 32; dev->mtu = NewMtu; @@ -2746,7 +2741,8 @@ SK_EVPARA EvPara; EvPara.Para32[1] = -1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - if (pOtherNet->Up) { + if (netif_running(pOtherDev)) { + DEV_NET *pOtherNet = netdev_priv(pOtherDev); EvPara.Para32[0] = pOtherNet->PortNr; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); } @@ -2820,7 +2816,7 @@ unsigned long Flags; /* for spin lock */ pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; - if (pNet->Mtu <= 1500) { + if (dev->mtu <= 1500) { pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; } else { pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - @@ -3771,25 +3767,21 @@ int Capabilities[3][3] = * * Returns: N/A */ -static void ProductStr( -SK_AC *pAC /* pointer to adapter context */ +static inline int ProductStr( + SK_AC *pAC, /* pointer to adapter context */ + char *DeviceStr, /* result string */ + int StrLen /* length of the string */ ) { -int StrLen = 80; /* length of the string, defined in SK_AC */ char Keyword[] = VPD_NAME; /* vpd productname identifier */ int ReturnCode; /* return code from vpd_read */ unsigned long Flags; spin_lock_irqsave(&pAC->SlowPathLock, Flags); - ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr, - &StrLen); + ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - if (ReturnCode != 0) { - /* there was an error reading the vpd data */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR, - ("Error reading VPD data: %d\n", ReturnCode)); - pAC->DeviceStr[0] = '\0'; - } + + return ReturnCode; } /* ProductStr */ /***************************************************************************** @@ -3992,28 +3984,6 @@ SK_U8 *pVal) /* pointer to store the read value */ /***************************************************************************** * - * SkPciWriteCfgDWord - write a 32 bit value to pci config space - * - * Description: - * This routine writes a 32 bit value to the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciWriteCfgDWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U32 Val) /* pointer to store the read value */ -{ - pci_write_config_dword(pAC->PciDev, PciAddr, Val); - return(0); -} /* SkPciWriteCfgDWord */ - - -/***************************************************************************** - * * SkPciWriteCfgWord - write a 16 bit value to pci config space * * Description: @@ -4150,6 +4120,7 @@ SK_BOOL DualNet; Flags); break; case SK_DRV_NET_UP: /* SK_U32 PortIdx */ + { struct net_device *dev = pAC->dev[Param.Para32[0]]; /* action list 5 */ FromPort = Param.Para32[0]; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4233,22 +4204,12 @@ SK_BOOL DualNet; printk(" irq moderation: disabled\n"); -#ifdef SK_ZEROCOPY - if (pAC->ChipsetType) -#ifdef USE_SK_TX_CHECKSUM - printk(" scatter-gather: enabled\n"); -#else - printk(" tx-checksum: disabled\n"); -#endif - else - printk(" scatter-gather: disabled\n"); -#else - printk(" scatter-gather: disabled\n"); -#endif - -#ifndef USE_SK_RX_CHECKSUM - printk(" rx-checksum: disabled\n"); -#endif + printk(" scatter-gather: %s\n", + (dev->features & NETIF_F_SG) ? "enabled" : "disabled"); + printk(" tx-checksum: %s\n", + (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled"); + printk(" rx-checksum: %s\n", + pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled"); } else { DoPrintInterfaceChange = SK_TRUE; @@ -4263,9 +4224,9 @@ SK_BOOL DualNet; } /* Inform the world that link protocol is up. */ - netif_carrier_on(pAC->dev[Param.Para32[0]]); - + netif_carrier_on(dev); break; + } case SK_DRV_NET_DOWN: /* SK_U32 Reason */ /* action list 7 */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4479,7 +4440,7 @@ SK_AC *pAc) /* pointer to adapter context */ pAC->DiagModeActive = DIAG_ACTIVE; if (pAC->BoardLevel > SK_INIT_DATA) { - if (pNet->Up) { + if (netif_running(pAC->dev[0])) { pAC->WasIfUp[0] = SK_TRUE; pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ DoPrintInterfaceChange = SK_FALSE; @@ -4489,7 +4450,7 @@ SK_AC *pAc) /* pointer to adapter context */ } if (pNet != netdev_priv(pAC->dev[1])) { pNet = netdev_priv(pAC->dev[1]); - if (pNet->Up) { + if (netif_running(pAC->dev[1])) { pAC->WasIfUp[1] = SK_TRUE; pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ DoPrintInterfaceChange = SK_FALSE; @@ -4815,6 +4776,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, struct net_device *dev = NULL; static int boards_found = 0; int error = -ENODEV; + char DeviceStr[80]; if (pci_enable_device(pdev)) goto out; @@ -4842,14 +4804,11 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, memset(pNet->pAC, 0, sizeof(SK_AC)); pAC = pNet->pAC; pAC->PciDev = pdev; - pAC->PciDevId = pdev->device; + pAC->dev[0] = dev; pAC->dev[1] = dev; - sprintf(pAC->Name, "SysKonnect SK-98xx"); pAC->CheckQueue = SK_FALSE; - pNet->Mtu = 1500; - pNet->Up = 0; dev->irq = pdev->irq; error = SkGeInitPCI(pAC); if (error) { @@ -4872,21 +4831,30 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM + /* Use only if yukon hardware */ if (pAC->ChipsetType) { - /* Use only if yukon hardware */ - /* SK and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; #endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[0].RxCsum = 1; #endif + } pAC->Index = boards_found++; if (SkGeBoardInit(dev, pAC)) goto out_free_netdev; + /* Read Adapter name from VPD */ + if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) { + printk(KERN_ERR "sk98lin: Could not read VPD data.\n"); + goto out_free_resources; + } + /* Register net device */ if (register_netdev(dev)) { printk(KERN_ERR "sk98lin: Could not register device.\n"); @@ -4894,8 +4862,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, } /* Print adapter specific string from vpd */ - ProductStr(pAC); - printk("%s: %s\n", dev->name, pAC->DeviceStr); + printk("%s: %s\n", dev->name, DeviceStr); /* Print configuration settings */ printk(" PrefPort:%c RlmtMode:%s\n", @@ -4911,8 +4878,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - SkGeProcCreate(dev); - pNet->PortNr = 0; pNet->NetNr = 0; @@ -4931,8 +4896,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, pNet->PortNr = 1; pNet->NetNr = 1; pNet->pAC = pAC; - pNet->Mtu = 1500; - pNet->Up = 0; dev->open = &SkGeOpen; dev->stop = &SkGeClose; @@ -4945,26 +4908,28 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM if (pAC->ChipsetType) { - /* SG and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; #endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[1].RxCsum = 1; #endif + } if (register_netdev(dev)) { printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n"); free_netdev(dev); pAC->dev[1] = pAC->dev[0]; } else { - SkGeProcCreate(dev); memcpy(&dev->dev_addr, &pAC->Addr.Net[1].CurrentMacAddress, 6); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - printk("%s: %s\n", dev->name, pAC->DeviceStr); + printk("%s: %s\n", dev->name, DeviceStr); printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); } } @@ -5000,10 +4965,7 @@ static void __devexit skge_remove_one(struct pci_dev *pdev) SK_AC *pAC = pNet->pAC; struct net_device *otherdev = pAC->dev[1]; - SkGeProcRemove(dev); unregister_netdev(dev); - if (otherdev != dev) - SkGeProcRemove(otherdev); SkGeYellowLED(pAC, pAC->IoBase, 0); @@ -5088,9 +5050,9 @@ static int skge_resume(struct pci_dev *pdev) pci_enable_device(pdev); pci_set_master(pdev); if (pAC->GIni.GIMacsFound == 2) - ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev); + ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev); else - ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev); + ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev); if (ret) { printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq); pAC->AllocFlag &= ~SK_ALLOC_IRQ; @@ -5148,23 +5110,12 @@ static struct pci_driver skge_driver = { static int __init skge_init(void) { - int error; - - pSkRootDir = proc_mkdir(SKRootName, NULL); - if (pSkRootDir) - pSkRootDir->owner = THIS_MODULE; - - error = pci_register_driver(&skge_driver); - if (error) - remove_proc_entry(SKRootName, NULL); - return error; + return pci_module_init(&skge_driver); } static void __exit skge_exit(void) { pci_unregister_driver(&skge_driver); - remove_proc_entry(SKRootName, NULL); - } module_init(skge_init); diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c deleted file mode 100644 index 5cece25c034e..000000000000 --- a/drivers/net/sk98lin/skproc.c +++ /dev/null @@ -1,265 +0,0 @@ -/****************************************************************************** - * - * Name: skproc.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.11 $ - * Date: $Date: 2003/12/11 16:03:57 $ - * Purpose: Funktions to display statictic data - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Created 22-Nov-2000 - * Author: Mirko Lindner (mlindner@syskonnect.de) - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ -#include <linux/proc_fs.h> -#include <linux/seq_file.h> - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" -#include "h/skversion.h" - -static int sk_seq_show(struct seq_file *seq, void *v); -static int sk_proc_open(struct inode *inode, struct file *file); - -struct file_operations sk_proc_fops = { - .owner = THIS_MODULE, - .open = sk_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - - -/***************************************************************************** - * - * sk_seq_show - show proc information of a particular adapter - * - * Description: - * This function fills the proc entry with statistic data about - * the ethernet device. It invokes the generic sk_gen_browse() to - * print out all items one per one. - * - * Returns: 0 - * - */ -static int sk_seq_show(struct seq_file *seq, void *v) -{ - struct net_device *dev = seq->private; - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct; - unsigned long Flags; - unsigned int Size; - char sens_msg[50]; - int t; - int i; - - /* NetIndex in GetStruct is now required, zero is only dummy */ - for (t=pAC->GIni.GIMacsFound; t > 0; t--) { - if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1) - t--; - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - Size = SK_PNMI_STRUCT_SIZE; -#ifdef SK_DIAG_SUPPORT - if (pAC->BoardLevel == SK_INIT_DATA) { - SK_MEMCPY(&(pAC->PnmiStruct), &(pAC->PnmiBackup), sizeof(SK_PNMI_STRUCT_DATA)); - if (pAC->DiagModeActive == DIAG_NOTACTIVE) { - pAC->Pnmi.DiagAttached = SK_DIAG_IDLE; - } - } else { - SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1); - } -#else - SkPnmiGetStruct(pAC, pAC->IoBase, - pPnmiStruct, &Size, t-1); -#endif - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - if (pAC->dev[t-1] == dev) { - SK_PNMI_STAT *pPnmiStat = &pPnmiStruct->Stat[0]; - - seq_printf(seq, "\nDetailed statistic for device %s\n", - pAC->dev[t-1]->name); - seq_printf(seq, "=======================================\n"); - - /* Board statistics */ - seq_printf(seq, "\nBoard statistics\n\n"); - seq_printf(seq, "Active Port %c\n", - 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt. - Net[t-1].PrefPort]->PortNumber); - seq_printf(seq, "Preferred Port %c\n", - 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt. - Net[t-1].PrefPort]->PortNumber); - - seq_printf(seq, "Bus speed (MHz) %d\n", - pPnmiStruct->BusSpeed); - - seq_printf(seq, "Bus width (Bit) %d\n", - pPnmiStruct->BusWidth); - seq_printf(seq, "Driver version %s\n", - VER_STRING); - seq_printf(seq, "Hardware revision v%d.%d\n", - (pAC->GIni.GIPciHwRev >> 4) & 0x0F, - pAC->GIni.GIPciHwRev & 0x0F); - - /* Print sensor informations */ - for (i=0; i < pAC->I2c.MaxSens; i ++) { - /* Check type */ - switch (pAC->I2c.SenTable[i].SenType) { - case 1: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (C)"); - seq_printf(seq, "%-25s %d.%02d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue / 10, - pAC->I2c.SenTable[i].SenValue % 10); - - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (F)"); - seq_printf(seq, "%-25s %d.%02d\n", - sens_msg, - ((((pAC->I2c.SenTable[i].SenValue) - *10)*9)/5 + 3200)/100, - ((((pAC->I2c.SenTable[i].SenValue) - *10)*9)/5 + 3200) % 10); - break; - case 2: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (V)"); - seq_printf(seq, "%-25s %d.%03d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue / 1000, - pAC->I2c.SenTable[i].SenValue % 1000); - break; - case 3: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (rpm)"); - seq_printf(seq, "%-25s %d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue); - break; - default: - break; - } - } - - /*Receive statistics */ - seq_printf(seq, "\nReceive statistics\n\n"); - - seq_printf(seq, "Received bytes %Lu\n", - (unsigned long long) pPnmiStat->StatRxOctetsOkCts); - seq_printf(seq, "Received packets %Lu\n", - (unsigned long long) pPnmiStat->StatRxOkCts); -#if 0 - if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && - pAC->HWRevision < 12) { - pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxShortsCts; - pPnmiStat->StatRxShortsCts = 0; - } -#endif - if (dev->mtu > 1500) - pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxTooLongCts; - - seq_printf(seq, "Receive errors %Lu\n", - (unsigned long long) pPnmiStruct->InErrorsCts); - seq_printf(seq, "Receive dropped %Lu\n", - (unsigned long long) pPnmiStruct->RxNoBufCts); - seq_printf(seq, "Received multicast %Lu\n", - (unsigned long long) pPnmiStat->StatRxMulticastOkCts); - seq_printf(seq, "Receive error types\n"); - seq_printf(seq, " length %Lu\n", - (unsigned long long) pPnmiStat->StatRxRuntCts); - seq_printf(seq, " buffer overflow %Lu\n", - (unsigned long long) pPnmiStat->StatRxFifoOverflowCts); - seq_printf(seq, " bad crc %Lu\n", - (unsigned long long) pPnmiStat->StatRxFcsCts); - seq_printf(seq, " framing %Lu\n", - (unsigned long long) pPnmiStat->StatRxFramingCts); - seq_printf(seq, " missed frames %Lu\n", - (unsigned long long) pPnmiStat->StatRxMissedCts); - - if (dev->mtu > 1500) - pPnmiStat->StatRxTooLongCts = 0; - - seq_printf(seq, " too long %Lu\n", - (unsigned long long) pPnmiStat->StatRxTooLongCts); - seq_printf(seq, " carrier extension %Lu\n", - (unsigned long long) pPnmiStat->StatRxCextCts); - seq_printf(seq, " too short %Lu\n", - (unsigned long long) pPnmiStat->StatRxShortsCts); - seq_printf(seq, " symbol %Lu\n", - (unsigned long long) pPnmiStat->StatRxSymbolCts); - seq_printf(seq, " LLC MAC size %Lu\n", - (unsigned long long) pPnmiStat->StatRxIRLengthCts); - seq_printf(seq, " carrier event %Lu\n", - (unsigned long long) pPnmiStat->StatRxCarrierCts); - seq_printf(seq, " jabber %Lu\n", - (unsigned long long) pPnmiStat->StatRxJabberCts); - - - /*Transmit statistics */ - seq_printf(seq, "\nTransmit statistics\n\n"); - - seq_printf(seq, "Transmited bytes %Lu\n", - (unsigned long long) pPnmiStat->StatTxOctetsOkCts); - seq_printf(seq, "Transmited packets %Lu\n", - (unsigned long long) pPnmiStat->StatTxOkCts); - seq_printf(seq, "Transmit errors %Lu\n", - (unsigned long long) pPnmiStat->StatTxSingleCollisionCts); - seq_printf(seq, "Transmit dropped %Lu\n", - (unsigned long long) pPnmiStruct->TxNoBufCts); - seq_printf(seq, "Transmit collisions %Lu\n", - (unsigned long long) pPnmiStat->StatTxSingleCollisionCts); - seq_printf(seq, "Transmit error types\n"); - seq_printf(seq, " excessive collision %ld\n", - pAC->stats.tx_aborted_errors); - seq_printf(seq, " carrier %Lu\n", - (unsigned long long) pPnmiStat->StatTxCarrierCts); - seq_printf(seq, " fifo underrun %Lu\n", - (unsigned long long) pPnmiStat->StatTxFifoUnderrunCts); - seq_printf(seq, " heartbeat %Lu\n", - (unsigned long long) pPnmiStat->StatTxCarrierCts); - seq_printf(seq, " window %ld\n", - pAC->stats.tx_window_errors); - - } - } - return 0; -} - -/***************************************************************************** - * - * sk_proc_open - register the show function when proc is open'ed - * - * Description: - * This function is called whenever a sk98lin proc file is queried. - * - * Returns: the return value of single_open() - * - */ -static int sk_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, sk_seq_show, PDE(inode)->data); -} - -/******************************************************************************* - * - * End of file - * - ******************************************************************************/ diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 00d683063c01..b538e3038058 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -25,6 +25,7 @@ */ #include <linux/config.h> +#include <linux/in.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -43,7 +44,7 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 @@ -88,15 +89,14 @@ MODULE_DEVICE_TABLE(pci, skge_id_table); static int skge_up(struct net_device *dev); static int skge_down(struct net_device *dev); +static void skge_phy_reset(struct skge_port *skge); static void skge_tx_clean(struct skge_port *skge); static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static void genesis_get_stats(struct skge_port *skge, u64 *data); static void yukon_get_stats(struct skge_port *skge, u64 *data); static void yukon_init(struct skge_hw *hw, int port); -static void yukon_reset(struct skge_hw *hw, int port); static void genesis_mac_init(struct skge_hw *hw, int port); -static void genesis_reset(struct skge_hw *hw, int port); static void genesis_link_up(struct skge_port *skge); /* Avoid conditionals by using array */ @@ -276,10 +276,9 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) skge->autoneg = ecmd->autoneg; skge->advertising = ecmd->advertising; - if (netif_running(dev)) { - skge_down(dev); - skge_up(dev); - } + if (netif_running(dev)) + skge_phy_reset(skge); + return (0); } @@ -399,6 +398,7 @@ static int skge_set_ring_param(struct net_device *dev, struct ethtool_ringparam *p) { struct skge_port *skge = netdev_priv(dev); + int err; if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE || p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE) @@ -409,7 +409,9 @@ static int skge_set_ring_param(struct net_device *dev, if (netif_running(dev)) { skge_down(dev); - skge_up(dev); + err = skge_up(dev); + if (err) + dev_close(dev); } return 0; @@ -430,21 +432,11 @@ static void skge_set_msglevel(struct net_device *netdev, u32 value) static int skge_nway_reset(struct net_device *dev) { struct skge_port *skge = netdev_priv(dev); - struct skge_hw *hw = skge->hw; - int port = skge->port; if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev)) return -EINVAL; - spin_lock_bh(&hw->phy_lock); - if (hw->chip_id == CHIP_ID_GENESIS) { - genesis_reset(hw, port); - genesis_mac_init(hw, port); - } else { - yukon_reset(hw, port); - yukon_init(hw, port); - } - spin_unlock_bh(&hw->phy_lock); + skge_phy_reset(skge); return 0; } @@ -516,10 +508,8 @@ static int skge_set_pauseparam(struct net_device *dev, else skge->flow_control = FLOW_MODE_NONE; - if (netif_running(dev)) { - skge_down(dev); - skge_up(dev); - } + if (netif_running(dev)) + skge_phy_reset(skge); return 0; } @@ -2019,6 +2009,25 @@ static void yukon_phy_intr(struct skge_port *skge) /* XXX restart autonegotiation? */ } +static void skge_phy_reset(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + netif_stop_queue(skge->netdev); + netif_carrier_off(skge->netdev); + + spin_lock_bh(&hw->phy_lock); + if (hw->chip_id == CHIP_ID_GENESIS) { + genesis_reset(hw, port); + genesis_mac_init(hw, port); + } else { + yukon_reset(hw, port); + yukon_init(hw, port); + } + spin_unlock_bh(&hw->phy_lock); +} + /* Basic MII support */ static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { @@ -2187,6 +2196,7 @@ static int skge_up(struct net_device *dev) kfree(skge->rx_ring.start); free_pci_mem: pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + skge->mem = NULL; return err; } @@ -2197,6 +2207,9 @@ static int skge_down(struct net_device *dev) struct skge_hw *hw = skge->hw; int port = skge->port; + if (skge->mem == NULL) + return 0; + if (netif_msg_ifdown(skge)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); @@ -2253,6 +2266,7 @@ static int skge_down(struct net_device *dev) kfree(skge->rx_ring.start); kfree(skge->tx_ring.start); pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + skge->mem = NULL; return 0; } @@ -2413,18 +2427,23 @@ static void skge_tx_timeout(struct net_device *dev) static int skge_change_mtu(struct net_device *dev, int new_mtu) { - int err = 0; - int running = netif_running(dev); + int err; if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; + if (!netif_running(dev)) { + dev->mtu = new_mtu; + return 0; + } + + skge_down(dev); - if (running) - skge_down(dev); dev->mtu = new_mtu; - if (running) - skge_up(dev); + + err = skge_up(dev); + if (err) + dev_close(dev); return err; } @@ -3398,8 +3417,8 @@ static int skge_resume(struct pci_dev *pdev) struct net_device *dev = hw->dev[i]; if (dev) { netif_device_attach(dev); - if (netif_running(dev)) - skge_up(dev); + if (netif_running(dev) && skge_up(dev)) + dev_close(dev); } } return 0; diff --git a/drivers/net/skge.h b/drivers/net/skge.h index ee123c15f545..2efdacc290e5 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -475,18 +475,6 @@ enum { Q_T2 = 0x40, /* 32 bit Test Register 2 */ Q_T3 = 0x44, /* 32 bit Test Register 3 */ -/* Yukon-2 */ - Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ - Q_WM = 0x40, /* 16 bit FIFO Watermark */ - Q_AL = 0x42, /* 8 bit FIFO Alignment */ - Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ - Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ - Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ - Q_RL = 0x4a, /* 8 bit FIFO Read Level */ - Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ - Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ - Q_WL = 0x4e, /* 8 bit FIFO Write Level */ - Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ }; #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) @@ -675,22 +663,16 @@ enum { LED_OFF = 1<<0, /* switch LED off */ }; -/* Receive GMAC FIFO (YUKON and Yukon-2) */ +/* Receive GMAC FIFO (YUKON) */ enum { RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ - RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ - - RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ - RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ - RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ - RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ }; @@ -855,48 +837,6 @@ enum { GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ }; -/* Status BMU Registers (Yukon-2 only)*/ -enum { - STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ - STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ - /* 0x0e85 - 0x0e86: reserved */ - STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */ - STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */ - STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ - STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ - STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ - STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ - STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ - STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ - -/* FIFO Control/Status Registers (Yukon-2 only)*/ - STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ - STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ - STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ - STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ - STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ - STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ - STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ - -/* Level and ISR Timer Registers (Yukon-2 only)*/ - STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ - STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */ - STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */ - STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */ - STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ - STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ - STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ - STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ - STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ - STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ - STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */ - STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */ - - ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ - ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ - ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ - ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ -}; enum { LINKLED_OFF = 0x01, @@ -923,8 +863,6 @@ enum { WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ - WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ - WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ /* WOL Pattern Length Registers (YUKON only) */ @@ -1641,15 +1579,6 @@ enum { PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ }; -/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ -/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ -enum { - PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ - PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ - PHY_M_MAC_MD_COPPER = 5,/* Copper only */ - PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ -}; -#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ enum { diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c new file mode 100644 index 000000000000..f5d697c0c031 --- /dev/null +++ b/drivers/net/sky2.c @@ -0,0 +1,3262 @@ +/* + * New driver for Marvell Yukon 2 chipset. + * Based on earlier sk98lin, and skge driver. + * + * This driver intentionally does not support all the features + * of the original driver such as link fail-over and link management because + * those should be done at higher levels. + * + * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * TOTEST + * - speed setting + * - suspend/resume + */ + +#include <linux/config.h> +#include <linux/crc32.h> +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/if_vlan.h> +#include <linux/prefetch.h> +#include <linux/mii.h> + +#include <asm/irq.h> + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define SKY2_VLAN_TAG_USED 1 +#endif + +#include "sky2.h" + +#define DRV_NAME "sky2" +#define DRV_VERSION "0.11" +#define PFX DRV_NAME " " + +/* + * The Yukon II chipset takes 64 bit command blocks (called list elements) + * that are organized into three (receive, transmit, status) different rings + * similar to Tigon3. A transmit can require several elements; + * a receive requires one (or two if using 64 bit dma). + */ + +#define is_ec_a1(hw) \ + unlikely((hw)->chip_id == CHIP_ID_YUKON_EC && \ + (hw)->chip_rev == CHIP_REV_YU_EC_A1) + +#define RX_LE_SIZE 512 +#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) +#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) +#define RX_DEF_PENDING RX_MAX_PENDING + +#define TX_RING_SIZE 512 +#define TX_DEF_PENDING (TX_RING_SIZE - 1) +#define TX_MIN_PENDING 64 +#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS) + +#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ +#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) +#define ETH_JUMBO_MTU 9000 +#define TX_WATCHDOG (5 * HZ) +#define NAPI_WEIGHT 64 +#define PHY_RETRIES 1000 + +static const u32 default_msg = + NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK + | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR + | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_INTR; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static int copybreak __read_mostly = 256; +module_param(copybreak, int, 0); +MODULE_PARM_DESC(copybreak, "Receive copy threshold"); + +static const struct pci_device_id sky2_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, sky2_id_table); + +/* Avoid conditionals by using array */ +static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; +static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; + +/* This driver supports yukon2 chipset only */ +static const char *yukon2_name[] = { + "XL", /* 0xb3 */ + "EC Ultra", /* 0xb4 */ + "UNKNOWN", /* 0xb5 */ + "EC", /* 0xb6 */ + "FE", /* 0xb7 */ +}; + +/* Access to external PHY */ +static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) +{ + int i; + + gma_write16(hw, port, GM_SMI_DATA, val); + gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); + + for (i = 0; i < PHY_RETRIES; i++) { + if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + return 0; + udelay(1); + } + + printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name); + return -ETIMEDOUT; +} + +static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) +{ + int i; + + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) + | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); + + for (i = 0; i < PHY_RETRIES; i++) { + if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) { + *val = gma_read16(hw, port, GM_SMI_DATA); + return 0; + } + + udelay(1); + } + + return -ETIMEDOUT; +} + +static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) +{ + u16 v; + + if (__gm_phy_read(hw, port, reg, &v) != 0) + printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name); + return v; +} + +static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) +{ + u16 power_control; + u32 reg1; + int vaux; + int ret = 0; + + pr_debug("sky2_set_power_state %d\n", state); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + + pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control); + vaux = (sky2_read8(hw, B0_CTST) & Y2_VAUX_AVAIL) && + (power_control & PCI_PM_CAP_PME_D3cold); + + pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control); + + power_control |= PCI_PM_CTRL_PME_STATUS; + power_control &= ~(PCI_PM_CTRL_STATE_MASK); + + switch (state) { + case PCI_D0: + /* switch power to VCC (WA for VAUX problem) */ + sky2_write8(hw, B0_POWER_CTRL, + PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + + /* disable Core Clock Division, */ + sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + /* enable bits are inverted */ + sky2_write8(hw, B2_Y2_CLK_GATE, + Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); + else + sky2_write8(hw, B2_Y2_CLK_GATE, 0); + + /* Turn off phy power saving */ + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + + /* looks like this XL is back asswards .. */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { + reg1 |= PCI_Y2_PHY1_COMA; + if (hw->ports > 1) + reg1 |= PCI_Y2_PHY2_COMA; + } + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + break; + + case PCI_D3hot: + case PCI_D3cold: + /* Turn on phy power saving */ + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + else + reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + sky2_write8(hw, B2_Y2_CLK_GATE, 0); + else + /* enable bits are inverted */ + sky2_write8(hw, B2_Y2_CLK_GATE, + Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); + + /* switch power to VAUX */ + if (vaux && state != PCI_D3cold) + sky2_write8(hw, B0_POWER_CTRL, + (PC_VAUX_ENA | PC_VCC_ENA | + PC_VAUX_ON | PC_VCC_OFF)); + break; + default: + printk(KERN_ERR PFX "Unknown power state %d\n", state); + ret = -1; + } + + pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + return ret; +} + +static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) +{ + u16 reg; + + /* disable all GMAC IRQ's */ + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); + /* disable PHY IRQs */ + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + + gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + gma_write16(hw, port, GM_MC_ADDR_H2, 0); + gma_write16(hw, port, GM_MC_ADDR_H3, 0); + gma_write16(hw, port, GM_MC_ADDR_H4, 0); + + reg = gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; + gma_write16(hw, port, GM_RX_CTRL, reg); +} + +static void sky2_phy_init(struct sky2_hw *hw, unsigned port) +{ + struct sky2_port *sky2 = netdev_priv(hw->dev[port]); + u16 ctrl, ct1000, adv, pg, ledctrl, ledover; + + if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) { + u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + + ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); + + if (hw->chip_id == CHIP_ID_YUKON_EC) + ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; + else + ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3); + + gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + } + + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + if (hw->copper) { + if (hw->chip_id == CHIP_ID_YUKON_FE) { + /* enable automatic crossover */ + ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; + } else { + /* disable energy detect */ + ctrl &= ~PHY_M_PC_EN_DET_MSK; + + /* enable automatic crossover */ + ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); + + if (sky2->autoneg == AUTONEG_ENABLE && + hw->chip_id == CHIP_ID_YUKON_XL) { + ctrl &= ~PHY_M_PC_DSC_MSK; + ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; + } + } + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + } else { + /* workaround for deviation #4.88 (CRC errors) */ + /* disable Automatic Crossover */ + + ctrl &= ~PHY_M_PC_MDIX_MSK; + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + if (hw->chip_id == CHIP_ID_YUKON_XL) { + /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl &= ~PHY_M_MAC_MD_MSK; + ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + /* select page 1 to access Fiber registers */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); + } + } + + ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); + if (sky2->autoneg == AUTONEG_DISABLE) + ctrl &= ~PHY_CT_ANE; + else + ctrl |= PHY_CT_ANE; + + ctrl |= PHY_CT_RESET; + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + ctrl = 0; + ct1000 = 0; + adv = PHY_AN_CSMA; + + if (sky2->autoneg == AUTONEG_ENABLE) { + if (hw->copper) { + if (sky2->advertising & ADVERTISED_1000baseT_Full) + ct1000 |= PHY_M_1000C_AFD; + if (sky2->advertising & ADVERTISED_1000baseT_Half) + ct1000 |= PHY_M_1000C_AHD; + if (sky2->advertising & ADVERTISED_100baseT_Full) + adv |= PHY_M_AN_100_FD; + if (sky2->advertising & ADVERTISED_100baseT_Half) + adv |= PHY_M_AN_100_HD; + if (sky2->advertising & ADVERTISED_10baseT_Full) + adv |= PHY_M_AN_10_FD; + if (sky2->advertising & ADVERTISED_10baseT_Half) + adv |= PHY_M_AN_10_HD; + } else /* special defines for FIBER (88E1011S only) */ + adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + + /* Set Flow-control capabilities */ + if (sky2->tx_pause && sky2->rx_pause) + adv |= PHY_AN_PAUSE_CAP; /* symmetric */ + else if (sky2->rx_pause && !sky2->tx_pause) + adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP; + else if (!sky2->rx_pause && sky2->tx_pause) + adv |= PHY_AN_PAUSE_ASYM; /* local */ + + /* Restart Auto-negotiation */ + ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + /* forced speed/duplex settings */ + ct1000 = PHY_M_1000C_MSE; + + if (sky2->duplex == DUPLEX_FULL) + ctrl |= PHY_CT_DUP_MD; + + switch (sky2->speed) { + case SPEED_1000: + ctrl |= PHY_CT_SP1000; + break; + case SPEED_100: + ctrl |= PHY_CT_SP100; + break; + } + + ctrl |= PHY_CT_RESET; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE) + gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + /* Setup Phy LED's */ + ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); + ledover = 0; + + switch (hw->chip_id) { + case CHIP_ID_YUKON_FE: + /* on 88E3082 these bits are at 11..9 (shifted left) */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; + + ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR); + + /* delete ACT LED control bits */ + ctrl &= ~PHY_M_FELP_LED1_MSK; + /* change ACT LED control to blink mode */ + ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL); + gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); + break; + + case CHIP_ID_YUKON_XL: + pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + + /* select page 3 to access LED control register */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + + /* set LED Function Control register */ + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ + PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ + PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ + PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ + + /* set Polarity Control register */ + gm_phy_write(hw, port, PHY_MARV_PHY_STAT, + (PHY_M_POLC_LS1_P_MIX(4) | + PHY_M_POLC_IS0_P_MIX(4) | + PHY_M_POLC_LOS_CTRL(2) | + PHY_M_POLC_INIT_CTRL(2) | + PHY_M_POLC_STA1_CTRL(2) | + PHY_M_POLC_STA0_CTRL(2))); + + /* restore page register */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + break; + + default: + /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + } + + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + + if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { + /* turn on 100 Mbps LED (LED_LINK100) */ + ledover |= PHY_M_LED_MO_100(MO_LED_ON); + } + + if (ledover) + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + + /* Enable phy interrupt on auto-negotiation complete (or link up) */ + if (sky2->autoneg == AUTONEG_ENABLE) + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + else + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); +} + +/* Force a renegotiation */ +static void sky2_phy_reinit(struct sky2_port *sky2) +{ + down(&sky2->phy_sema); + sky2_phy_init(sky2->hw, sky2->port); + up(&sky2->phy_sema); +} + +static void sky2_mac_init(struct sky2_hw *hw, unsigned port) +{ + struct sky2_port *sky2 = netdev_priv(hw->dev[port]); + u16 reg; + int i; + const u8 *addr = hw->dev[port]->dev_addr; + + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE); + + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) { + /* WA DEV_472 -- looks like crossed wires on port 2 */ + /* clear GMAC 1 Control reset */ + sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); + do { + sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET); + sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR); + } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL || + gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 || + gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); + } + + if (sky2->autoneg == AUTONEG_DISABLE) { + reg = gma_read16(hw, port, GM_GP_CTRL); + reg |= GM_GPCR_AU_ALL_DIS; + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); + + switch (sky2->speed) { + case SPEED_1000: + reg |= GM_GPCR_SPEED_1000; + /* fallthru */ + case SPEED_100: + reg |= GM_GPCR_SPEED_100; + } + + if (sky2->duplex == DUPLEX_FULL) + reg |= GM_GPCR_DUP_FULL; + } else + reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; + + if (!sky2->tx_pause && !sky2->rx_pause) { + sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + reg |= + GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } else if (sky2->tx_pause && !sky2->rx_pause) { + /* disable Rx flow-control */ + reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } + + gma_write16(hw, port, GM_GP_CTRL, reg); + + sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); + + down(&sky2->phy_sema); + sky2_phy_init(hw, port); + up(&sky2->phy_sema); + + /* MIB clear */ + reg = gma_read16(hw, port, GM_PHY_ADDR); + gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + + for (i = 0; i < GM_MIB_CNT_SIZE; i++) + gma_read16(hw, port, GM_MIB_CNT_BASE + 8 * i); + gma_write16(hw, port, GM_PHY_ADDR, reg); + + /* transmit control */ + gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + + /* receive control reg: unicast + multicast + no FCS */ + gma_write16(hw, port, GM_RX_CTRL, + GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); + + /* transmit flow control */ + gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + + /* transmit parameter */ + gma_write16(hw, port, GM_TX_PARAM, + TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | + TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | + TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | + TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); + + /* serial mode register */ + reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + + if (hw->dev[port]->mtu > ETH_DATA_LEN) + reg |= GM_SMOD_JUMBO_ENA; + + gma_write16(hw, port, GM_SERIAL_MODE, reg); + + /* virtual address for data */ + gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + + /* physical address: used for pause frames */ + gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + + /* ignore counter overflows */ + gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + + /* Configure Rx MAC FIFO */ + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), + GMF_RX_CTRL_DEF); + + /* Flush Rx MAC FIFO on any flow control or error */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + + /* Set threshold to 0xa (64 bytes) + * ASF disabled so no need to do WA dev #4.30 + */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); + + if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); + sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); + if (hw->dev[port]->mtu > ETH_DATA_LEN) { + /* set Tx GMAC FIFO Almost Empty Threshold */ + sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180); + /* Disable Store & Forward mode for TX */ + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); + } + } + +} + +static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) +{ + u32 end; + + start /= 8; + len /= 8; + end = start + len - 1; + + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); + sky2_write32(hw, RB_ADDR(q, RB_START), start); + sky2_write32(hw, RB_ADDR(q, RB_END), end); + sky2_write32(hw, RB_ADDR(q, RB_WP), start); + sky2_write32(hw, RB_ADDR(q, RB_RP), start); + + if (q == Q_R1 || q == Q_R2) { + u32 rxup, rxlo; + + rxlo = len/2; + rxup = rxlo + len/4; + + /* Set thresholds on receive queue's */ + sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), rxup); + sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), rxlo); + } else { + /* Enable store & forward on Tx queue's because + * Tx FIFO is only 1K on Yukon + */ + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); + } + + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); + sky2_read8(hw, RB_ADDR(q, RB_CTRL)); +} + +/* Setup Bus Memory Interface */ +static void sky2_qset(struct sky2_hw *hw, u16 q) +{ + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); + sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT); +} + +/* Setup prefetch unit registers. This is the interface between + * hardware and driver list elements + */ +static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, + u64 addr, u32 last) +{ + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr); + sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); + + sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL)); +} + +static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) +{ + struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; + + sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE; + return le; +} + +/* + * This is a workaround code taken from SysKonnect sk98lin driver + * to deal with chip bug on Yukon EC rev 0 in the wraparound case. + */ +static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, + u16 idx, u16 *last, u16 size) +{ + if (is_ec_a1(hw) && idx < *last) { + u16 hwget = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); + + if (hwget == 0) { + /* Start prefetching again */ + sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 0xe0); + goto setnew; + } + + if (hwget == size - 1) { + /* set watermark to one list element */ + sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 8); + + /* set put index to first list element */ + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), 0); + } else /* have hardware go to end of list */ + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), + size - 1); + } else { +setnew: + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); + } + *last = idx; +} + + +static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) +{ + struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; + sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE; + return le; +} + +/* Return high part of DMA address (could be 32 or 64 bit) */ +static inline u32 high32(dma_addr_t a) +{ + return (a >> 16) >> 16; +} + +/* Build description to hardware about buffer */ +static inline void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) +{ + struct sky2_rx_le *le; + u32 hi = high32(map); + u16 len = sky2->rx_bufsize; + + if (sky2->rx_addr64 != hi) { + le = sky2_next_rx(sky2); + le->addr = cpu_to_le32(hi); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->rx_addr64 = high32(map + len); + } + + le = sky2_next_rx(sky2); + le->addr = cpu_to_le32((u32) map); + le->length = cpu_to_le16(len); + le->ctrl = 0; + le->opcode = OP_PACKET | HW_OWNER; +} + + +/* Tell chip where to start receive checksum. + * Actually has two checksums, but set both same to avoid possible byte + * order problems. + */ +static void rx_set_checksum(struct sky2_port *sky2) +{ + struct sky2_rx_le *le; + + le = sky2_next_rx(sky2); + le->addr = (ETH_HLEN << 16) | ETH_HLEN; + le->ctrl = 0; + le->opcode = OP_TCPSTART | HW_OWNER; + + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + +} + +/* + * The RX Stop command will not work for Yukon-2 if the BMU does not + * reach the end of packet and since we can't make sure that we have + * incoming data, we must reset the BMU while it is not doing a DMA + * transfer. Since it is possible that the RX path is still active, + * the RX RAM buffer will be stopped first, so any possible incoming + * data will not trigger a DMA. After the RAM buffer is stopped, the + * BMU is polled until any DMA in progress is ended and only then it + * will be reset. + */ +static void sky2_rx_stop(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned rxq = rxqaddr[sky2->port]; + int i; + + /* disable the RAM Buffer receive queue */ + sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD); + + for (i = 0; i < 0xffff; i++) + if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL)) + == sky2_read8(hw, RB_ADDR(rxq, Q_RL))) + goto stopped; + + printk(KERN_WARNING PFX "%s: receiver stop failed\n", + sky2->netdev->name); +stopped: + sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + + /* reset the Rx prefetch unit */ + sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); +} + +/* Clean out receive buffer area, assumes receiver hardware stopped */ +static void sky2_rx_clean(struct sky2_port *sky2) +{ + unsigned i; + + memset(sky2->rx_le, 0, RX_LE_BYTES); + for (i = 0; i < sky2->rx_pending; i++) { + struct ring_info *re = sky2->rx_ring + i; + + if (re->skb) { + pci_unmap_single(sky2->hw->pdev, + re->mapaddr, sky2->rx_bufsize, + PCI_DMA_FROMDEVICE); + kfree_skb(re->skb); + re->skb = NULL; + } + } +} + +/* Basic MII support */ +static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = if_mii(ifr); + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + int err = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -ENODEV; /* Phy still in reset */ + + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = PHY_ADDR_MARV; + + /* fallthru */ + case SIOCGMIIREG: { + u16 val = 0; + + down(&sky2->phy_sema); + err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); + up(&sky2->phy_sema); + + data->val_out = val; + break; + } + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + down(&sky2->phy_sema); + err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, + data->val_in); + up(&sky2->phy_sema); + break; + } + return err; +} + +#ifdef SKY2_VLAN_TAG_USED +static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + + spin_lock(&sky2->tx_lock); + + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); + sky2->vlgrp = grp; + + spin_unlock(&sky2->tx_lock); +} + +static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + + spin_lock(&sky2->tx_lock); + + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); + if (sky2->vlgrp) + sky2->vlgrp->vlan_devices[vid] = NULL; + + spin_unlock(&sky2->tx_lock); +} +#endif + +/* + * Allocate and setup receiver buffer pool. + * In case of 64 bit dma, there are 2X as many list elements + * available as ring entries + * and need to reserve one list element so we don't wrap around. + * + * It appears the hardware has a bug in the FIFO logic that + * cause it to hang if the FIFO gets overrun and the receive buffer + * is not aligned. This means we can't use skb_reserve to align + * the IP header. + */ +static int sky2_rx_start(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned rxq = rxqaddr[sky2->port]; + int i; + + sky2->rx_put = sky2->rx_next = 0; + sky2_qset(hw, rxq); + sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); + + rx_set_checksum(sky2); + for (i = 0; i < sky2->rx_pending; i++) { + struct ring_info *re = sky2->rx_ring + i; + + re->skb = dev_alloc_skb(sky2->rx_bufsize); + if (!re->skb) + goto nomem; + + re->mapaddr = pci_map_single(hw->pdev, re->skb->data, + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); + sky2_rx_add(sky2, re->mapaddr); + } + + /* Tell chip about available buffers */ + sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); + sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX)); + return 0; +nomem: + sky2_rx_clean(sky2); + return -ENOMEM; +} + +/* Bring up network interface. */ +static int sky2_up(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u32 ramsize, rxspace; + int err = -ENOMEM; + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + + /* must be power of 2 */ + sky2->tx_le = pci_alloc_consistent(hw->pdev, + TX_RING_SIZE * + sizeof(struct sky2_tx_le), + &sky2->tx_le_map); + if (!sky2->tx_le) + goto err_out; + + sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info), + GFP_KERNEL); + if (!sky2->tx_ring) + goto err_out; + sky2->tx_prod = sky2->tx_cons = 0; + + sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, + &sky2->rx_le_map); + if (!sky2->rx_le) + goto err_out; + memset(sky2->rx_le, 0, RX_LE_BYTES); + + sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info), + GFP_KERNEL); + if (!sky2->rx_ring) + goto err_out; + + sky2_mac_init(hw, port); + + /* Configure RAM buffers */ + if (hw->chip_id == CHIP_ID_YUKON_FE || + (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == 2)) + ramsize = 4096; + else { + u8 e0 = sky2_read8(hw, B2_E_0); + ramsize = (e0 == 0) ? (128 * 1024) : (e0 * 4096); + } + + /* 2/3 for Rx */ + rxspace = (2 * ramsize) / 3; + sky2_ramset(hw, rxqaddr[port], 0, rxspace); + sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); + + /* Make sure SyncQ is disabled */ + sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), + RB_RST_SET); + + sky2_qset(hw, txqaddr[port]); + if (hw->chip_id == CHIP_ID_YUKON_EC_U) + sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); + + + sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, + TX_RING_SIZE - 1); + + err = sky2_rx_start(sky2); + if (err) + goto err_out; + + /* Enable interrupts from phy/mac for port */ + hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + return 0; + +err_out: + if (sky2->rx_le) { + pci_free_consistent(hw->pdev, RX_LE_BYTES, + sky2->rx_le, sky2->rx_le_map); + sky2->rx_le = NULL; + } + if (sky2->tx_le) { + pci_free_consistent(hw->pdev, + TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_le, sky2->tx_le_map); + sky2->tx_le = NULL; + } + kfree(sky2->tx_ring); + kfree(sky2->rx_ring); + + sky2->tx_ring = NULL; + sky2->rx_ring = NULL; + return err; +} + +/* Modular subtraction in ring */ +static inline int tx_dist(unsigned tail, unsigned head) +{ + return (head - tail) % TX_RING_SIZE; +} + +/* Number of list elements available for next tx */ +static inline int tx_avail(const struct sky2_port *sky2) +{ + return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod); +} + +/* Estimate of number of transmit list elements required */ +static inline unsigned tx_le_req(const struct sk_buff *skb) +{ + unsigned count; + + count = sizeof(dma_addr_t) / sizeof(u32); + count += skb_shinfo(skb)->nr_frags * count; + + if (skb_shinfo(skb)->tso_size) + ++count; + + if (skb->ip_summed == CHECKSUM_HW) + ++count; + + return count; +} + +/* + * Put one packet in ring for transmit. + * A single packet can generate multiple list elements, and + * the number of ring elements will probably be less than the number + * of list elements used. + * + * No BH disabling for tx_lock here (like tg3) + */ +static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + struct sky2_tx_le *le = NULL; + struct tx_ring_info *re; + unsigned i, len; + dma_addr_t mapping; + u32 addr64; + u16 mss; + u8 ctrl; + + if (!spin_trylock(&sky2->tx_lock)) + return NETDEV_TX_LOCKED; + + if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { + /* There is a known but harmless race with lockless tx + * and netif_stop_queue. + */ + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", + dev->name); + } + spin_unlock(&sky2->tx_lock); + + return NETDEV_TX_BUSY; + } + + if (unlikely(netif_msg_tx_queued(sky2))) + printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", + dev->name, sky2->tx_prod, skb->len); + + len = skb_headlen(skb); + mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + addr64 = high32(mapping); + + re = sky2->tx_ring + sky2->tx_prod; + + /* Send high bits if changed or crosses boundary */ + if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) { + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(addr64); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = high32(mapping + len); + } + + /* Check for TCP Segmentation Offload */ + mss = skb_shinfo(skb)->tso_size; + if (mss != 0) { + /* just drop the packet if non-linear expansion fails */ + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb_any(skb); + goto out_unlock; + } + + mss += ((skb->h.th->doff - 5) * 4); /* TCP options */ + mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); + mss += ETH_HLEN; + } + + if (mss != sky2->tx_last_mss) { + le = get_tx_le(sky2); + le->tx.tso.size = cpu_to_le16(mss); + le->tx.tso.rsvd = 0; + le->opcode = OP_LRGLEN | HW_OWNER; + le->ctrl = 0; + sky2->tx_last_mss = mss; + } + + ctrl = 0; +#ifdef SKY2_VLAN_TAG_USED + /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */ + if (sky2->vlgrp && vlan_tx_tag_present(skb)) { + if (!le) { + le = get_tx_le(sky2); + le->tx.addr = 0; + le->opcode = OP_VLAN|HW_OWNER; + le->ctrl = 0; + } else + le->opcode |= OP_VLAN; + le->length = cpu_to_be16(vlan_tx_tag_get(skb)); + ctrl |= INS_VLAN; + } +#endif + + /* Handle TCP checksum offload */ + if (skb->ip_summed == CHECKSUM_HW) { + u16 hdr = skb->h.raw - skb->data; + u16 offset = hdr + skb->csum; + + ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; + if (skb->nh.iph->protocol == IPPROTO_UDP) + ctrl |= UDPTCP; + + le = get_tx_le(sky2); + le->tx.csum.start = cpu_to_le16(hdr); + le->tx.csum.offset = cpu_to_le16(offset); + le->length = 0; /* initial checksum value */ + le->ctrl = 1; /* one packet */ + le->opcode = OP_TCPLISW | HW_OWNER; + } + + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32((u32) mapping); + le->length = cpu_to_le16(len); + le->ctrl = ctrl; + le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); + + /* Record the transmit mapping info */ + re->skb = skb; + pci_unmap_addr_set(re, mapaddr, mapping); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + struct tx_ring_info *fre; + + mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + addr64 = (mapping >> 16) >> 16; + if (addr64 != sky2->tx_addr64) { + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(addr64); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = addr64; + } + + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32((u32) mapping); + le->length = cpu_to_le16(frag->size); + le->ctrl = ctrl; + le->opcode = OP_BUFFER | HW_OWNER; + + fre = sky2->tx_ring + + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE; + pci_unmap_addr_set(fre, mapaddr, mapping); + } + + re->idx = sky2->tx_prod; + le->ctrl |= EOP; + + sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod, + &sky2->tx_last_put, TX_RING_SIZE); + + if (tx_avail(sky2) <= MAX_SKB_TX_LE) + netif_stop_queue(dev); + +out_unlock: + mmiowb(); + spin_unlock(&sky2->tx_lock); + + dev->trans_start = jiffies; + return NETDEV_TX_OK; +} + +/* + * Free ring elements from starting at tx_cons until "done" + * + * NB: the hardware will tell us about partial completion of multi-part + * buffers; these are deferred until completion. + */ +static void sky2_tx_complete(struct sky2_port *sky2, u16 done) +{ + struct net_device *dev = sky2->netdev; + struct pci_dev *pdev = sky2->hw->pdev; + u16 nxt, put; + unsigned i; + + BUG_ON(done >= TX_RING_SIZE); + + if (unlikely(netif_msg_tx_done(sky2))) + printk(KERN_DEBUG "%s: tx done, up to %u\n", + dev->name, done); + + for (put = sky2->tx_cons; put != done; put = nxt) { + struct tx_ring_info *re = sky2->tx_ring + put; + struct sk_buff *skb = re->skb; + + nxt = re->idx; + BUG_ON(nxt >= TX_RING_SIZE); + prefetch(sky2->tx_ring + nxt); + + /* Check for partial status */ + if (tx_dist(put, done) < tx_dist(put, nxt)) + break; + + skb = re->skb; + pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), + skb_headlen(skb), PCI_DMA_TODEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct tx_ring_info *fre; + fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE; + pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr), + skb_shinfo(skb)->frags[i].size, + PCI_DMA_TODEVICE); + } + + dev_kfree_skb_any(skb); + } + + spin_lock(&sky2->tx_lock); + sky2->tx_cons = put; + if (netif_queue_stopped(dev) && tx_avail(sky2) > MAX_SKB_TX_LE) + netif_wake_queue(dev); + spin_unlock(&sky2->tx_lock); +} + +/* Cleanup all untransmitted buffers, assume transmitter not running */ +static void sky2_tx_clean(struct sky2_port *sky2) +{ + sky2_tx_complete(sky2, sky2->tx_prod); +} + +/* Network shutdown */ +static int sky2_down(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 ctrl; + + /* Never really got started! */ + if (!sky2->tx_le) + return 0; + + if (netif_msg_ifdown(sky2)) + printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); + + /* Stop more packets from being queued */ + netif_stop_queue(dev); + + /* Disable port IRQ */ + local_irq_disable(); + hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); + + flush_scheduled_work(); + + sky2_phy_reset(hw, port); + + /* Stop transmitter */ + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); + sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); + + sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), + RB_RST_SET | RB_DIS_OP_MD); + + ctrl = gma_read16(hw, port, GM_GP_CTRL); + ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); + gma_write16(hw, port, GM_GP_CTRL, ctrl); + + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + + /* Workaround shared GMAC reset */ + if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 + && port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); + + /* Disable Force Sync bit and Enable Alloc bit */ + sky2_write8(hw, SK_REG(port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); + sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); + + /* Reset the PCI FIFO of the async Tx queue */ + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), + BMU_RST_SET | BMU_FIFO_RST); + + /* Reset the Tx prefetch units */ + sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), + PREF_UNIT_RST_SET); + + sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); + + sky2_rx_stop(sky2); + + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + + /* turn off LED's */ + sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + + synchronize_irq(hw->pdev->irq); + + sky2_tx_clean(sky2); + sky2_rx_clean(sky2); + + pci_free_consistent(hw->pdev, RX_LE_BYTES, + sky2->rx_le, sky2->rx_le_map); + kfree(sky2->rx_ring); + + pci_free_consistent(hw->pdev, + TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_le, sky2->tx_le_map); + kfree(sky2->tx_ring); + + sky2->tx_le = NULL; + sky2->rx_le = NULL; + + sky2->rx_ring = NULL; + sky2->tx_ring = NULL; + + return 0; +} + +static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) +{ + if (!hw->copper) + return SPEED_1000; + + if (hw->chip_id == CHIP_ID_YUKON_FE) + return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + + switch (aux & PHY_M_PS_SPEED_MSK) { + case PHY_M_PS_SPEED_1000: + return SPEED_1000; + case PHY_M_PS_SPEED_100: + return SPEED_100; + default: + return SPEED_10; + } +} + +static void sky2_link_up(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + /* Enable Transmit FIFO Underrun */ + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); + + reg = gma_read16(hw, port, GM_GP_CTRL); + if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE) + reg |= GM_GPCR_DUP_FULL; + + /* enable Rx/Tx */ + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); + + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + + netif_carrier_on(sky2->netdev); + netif_wake_queue(sky2->netdev); + + /* Turn on link LED */ + sky2_write8(hw, SK_REG(port, LNK_LED_REG), + LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); + + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ + PHY_M_LEDC_INIT_CTRL(sky2->speed == + SPEED_10 ? 7 : 0) | + PHY_M_LEDC_STA1_CTRL(sky2->speed == + SPEED_100 ? 7 : 0) | + PHY_M_LEDC_STA0_CTRL(sky2->speed == + SPEED_1000 ? 7 : 0)); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } + + if (netif_msg_link(sky2)) + printk(KERN_INFO PFX + "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", + sky2->netdev->name, sky2->speed, + sky2->duplex == DUPLEX_FULL ? "full" : "half", + (sky2->tx_pause && sky2->rx_pause) ? "both" : + sky2->tx_pause ? "tx" : sky2->rx_pause ? "rx" : "none"); +} + +static void sky2_link_down(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + + reg = gma_read16(hw, port, GM_GP_CTRL); + reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); /* PCI post */ + + if (sky2->rx_pause && !sky2->tx_pause) { + /* restore Asymmetric Pause bit */ + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + gm_phy_read(hw, port, PHY_MARV_AUNE_ADV) + | PHY_M_AN_ASP); + } + + netif_carrier_off(sky2->netdev); + netif_stop_queue(sky2->netdev); + + /* Turn on link LED */ + sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); + + if (netif_msg_link(sky2)) + printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name); + sky2_phy_init(hw, port); +} + +static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 lpa; + + lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); + + if (lpa & PHY_M_AN_RF) { + printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name); + return -1; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE && + gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { + printk(KERN_ERR PFX "%s: master/slave fault", + sky2->netdev->name); + return -1; + } + + if (!(aux & PHY_M_PS_SPDUP_RES)) { + printk(KERN_ERR PFX "%s: speed/duplex mismatch", + sky2->netdev->name); + return -1; + } + + sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + + sky2->speed = sky2_phy_speed(hw, aux); + + /* Pause bits are offset (9..8) */ + if (hw->chip_id == CHIP_ID_YUKON_XL) + aux >>= 6; + + sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0; + sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0; + + if ((sky2->tx_pause || sky2->rx_pause) + && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + else + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + + return 0; +} + +/* + * Interrupt from PHY are handled outside of interrupt context + * because accessing phy registers requires spin wait which might + * cause excess interrupt latency. + */ +static void sky2_phy_task(void *arg) +{ + struct sky2_port *sky2 = arg; + struct sky2_hw *hw = sky2->hw; + u16 istatus, phystat; + + down(&sky2->phy_sema); + istatus = gm_phy_read(hw, sky2->port, PHY_MARV_INT_STAT); + phystat = gm_phy_read(hw, sky2->port, PHY_MARV_PHY_STAT); + + if (netif_msg_intr(sky2)) + printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", + sky2->netdev->name, istatus, phystat); + + if (istatus & PHY_M_IS_AN_COMPL) { + if (sky2_autoneg_done(sky2, phystat) == 0) + sky2_link_up(sky2); + goto out; + } + + if (istatus & PHY_M_IS_LSP_CHANGE) + sky2->speed = sky2_phy_speed(hw, phystat); + + if (istatus & PHY_M_IS_DUP_CHANGE) + sky2->duplex = + (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + + if (istatus & PHY_M_IS_LST_CHANGE) { + if (phystat & PHY_M_PS_LINK_UP) + sky2_link_up(sky2); + else + sky2_link_down(sky2); + } +out: + up(&sky2->phy_sema); + + local_irq_disable(); + hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); +} + +static void sky2_tx_timeout(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned txq = txqaddr[sky2->port]; + + if (netif_msg_timer(sky2)) + printk(KERN_ERR PFX "%s: tx timeout\n", dev->name); + + netif_stop_queue(dev); + + sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); + sky2_read32(hw, Q_ADDR(txq, Q_CSR)); + + sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); + + sky2_tx_clean(sky2); + + sky2_qset(hw, txq); + sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); + + netif_wake_queue(dev); +} + + +#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) +/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */ +static inline unsigned sky2_buf_size(int mtu) +{ + return roundup(mtu + ETH_HLEN + 4, 8); +} + +static int sky2_change_mtu(struct net_device *dev, int new_mtu) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + int err; + u16 ctl, mode; + + if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + return -EINVAL; + + if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN) + return -EINVAL; + + if (!netif_running(dev)) { + dev->mtu = new_mtu; + return 0; + } + + sky2_write32(hw, B0_IMSK, 0); + + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_stop_queue(dev); + netif_poll_disable(hw->dev[0]); + + ctl = gma_read16(hw, sky2->port, GM_GP_CTRL); + gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); + sky2_rx_stop(sky2); + sky2_rx_clean(sky2); + + dev->mtu = new_mtu; + sky2->rx_bufsize = sky2_buf_size(new_mtu); + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + + if (dev->mtu > ETH_DATA_LEN) + mode |= GM_SMOD_JUMBO_ENA; + + gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode); + + sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD); + + err = sky2_rx_start(sky2); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + + if (err) + dev_close(dev); + else { + gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); + + netif_poll_enable(hw->dev[0]); + netif_wake_queue(dev); + } + + return err; +} + +/* + * Receive one packet. + * For small packets or errors, just reuse existing skb. + * For larger packets, get new buffer. + */ +static struct sk_buff *sky2_receive(struct sky2_port *sky2, + u16 length, u32 status) +{ + struct ring_info *re = sky2->rx_ring + sky2->rx_next; + struct sk_buff *skb = NULL; + + if (unlikely(netif_msg_rx_status(sky2))) + printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", + sky2->netdev->name, sky2->rx_next, status, length); + + sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; + prefetch(sky2->rx_ring + sky2->rx_next); + + if (status & GMR_FS_ANY_ERR) + goto error; + + if (!(status & GMR_FS_RX_OK)) + goto resubmit; + + if ((status >> 16) != length || length > sky2->rx_bufsize) + goto oversize; + + if (length < copybreak) { + skb = alloc_skb(length + 2, GFP_ATOMIC); + if (!skb) + goto resubmit; + + skb_reserve(skb, 2); + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, + length, PCI_DMA_FROMDEVICE); + memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, + length, PCI_DMA_FROMDEVICE); + } else { + struct sk_buff *nskb; + + nskb = dev_alloc_skb(sky2->rx_bufsize); + if (!nskb) + goto resubmit; + + skb = re->skb; + re->skb = nskb; + pci_unmap_single(sky2->hw->pdev, re->mapaddr, + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); + prefetch(skb->data); + + re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); + } + + skb_put(skb, length); +resubmit: + re->skb->ip_summed = CHECKSUM_NONE; + sky2_rx_add(sky2, re->mapaddr); + + /* Tell receiver about new buffers. */ + sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, + &sky2->rx_last_put, RX_LE_SIZE); + + return skb; + +oversize: + ++sky2->net_stats.rx_over_errors; + goto resubmit; + +error: + ++sky2->net_stats.rx_errors; + + if (netif_msg_rx_err(sky2)) + printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", + sky2->netdev->name, status, length); + + if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) + sky2->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + sky2->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + sky2->net_stats.rx_crc_errors++; + if (status & GMR_FS_RX_FF_OV) + sky2->net_stats.rx_fifo_errors++; + + goto resubmit; +} + +/* + * Check for transmit complete + */ +#define TX_NO_STATUS 0xffff + +static inline void sky2_tx_check(struct sky2_hw *hw, int port, u16 last) +{ + if (last != TX_NO_STATUS) { + struct net_device *dev = hw->dev[port]; + if (dev && netif_running(dev)) { + struct sky2_port *sky2 = netdev_priv(dev); + sky2_tx_complete(sky2, last); + } + } +} + +/* + * Both ports share the same status interrupt, therefore there is only + * one poll routine. + */ +static int sky2_poll(struct net_device *dev0, int *budget) +{ + struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw; + unsigned int to_do = min(dev0->quota, *budget); + unsigned int work_done = 0; + u16 hwidx; + u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS }; + + hwidx = sky2_read16(hw, STAT_PUT_IDX); + BUG_ON(hwidx >= STATUS_RING_SIZE); + rmb(); + + while (hwidx != hw->st_idx) { + struct sky2_status_le *le = hw->st_le + hw->st_idx; + struct net_device *dev; + struct sky2_port *sky2; + struct sk_buff *skb; + u32 status; + u16 length; + u8 op; + + le = hw->st_le + hw->st_idx; + hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; + prefetch(hw->st_le + hw->st_idx); + + BUG_ON(le->link >= 2); + dev = hw->dev[le->link]; + if (dev == NULL || !netif_running(dev)) + continue; + + sky2 = netdev_priv(dev); + status = le32_to_cpu(le->status); + length = le16_to_cpu(le->length); + op = le->opcode & ~HW_OWNER; + le->opcode = 0; + + switch (op) { + case OP_RXSTAT: + skb = sky2_receive(sky2, length, status); + if (!skb) + break; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + +#ifdef SKY2_VLAN_TAG_USED + if (sky2->vlgrp && (status & GMR_FS_VLAN)) { + vlan_hwaccel_receive_skb(skb, + sky2->vlgrp, + be16_to_cpu(sky2->rx_tag)); + } else +#endif + netif_receive_skb(skb); + + if (++work_done >= to_do) + goto exit_loop; + break; + +#ifdef SKY2_VLAN_TAG_USED + case OP_RXVLAN: + sky2->rx_tag = length; + break; + + case OP_RXCHKSVLAN: + sky2->rx_tag = length; + /* fall through */ +#endif + case OP_RXCHKS: + skb = sky2->rx_ring[sky2->rx_next].skb; + skb->ip_summed = CHECKSUM_HW; + skb->csum = le16_to_cpu(status); + break; + + case OP_TXINDEXLE: + /* TX index reports status for both ports */ + tx_done[0] = status & 0xffff; + tx_done[1] = ((status >> 24) & 0xff) + | (u16)(length & 0xf) << 8; + break; + + default: + if (net_ratelimit()) + printk(KERN_WARNING PFX + "unknown status opcode 0x%x\n", op); + break; + } + } + +exit_loop: + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + mmiowb(); + + sky2_tx_check(hw, 0, tx_done[0]); + sky2_tx_check(hw, 1, tx_done[1]); + + if (sky2_read16(hw, STAT_PUT_IDX) == hw->st_idx) { + /* need to restart TX timer */ + if (is_ec_a1(hw)) { + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } + + netif_rx_complete(dev0); + hw->intr_mask |= Y2_IS_STAT_BMU; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + mmiowb(); + return 0; + } else { + *budget -= work_done; + dev0->quota -= work_done; + return 1; + } +} + +static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) +{ + struct net_device *dev = hw->dev[port]; + + printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n", + dev->name, status); + + if (status & Y2_IS_PAR_RD1) { + printk(KERN_ERR PFX "%s: ram data read parity error\n", + dev->name); + /* Clear IRQ */ + sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR); + } + + if (status & Y2_IS_PAR_WR1) { + printk(KERN_ERR PFX "%s: ram data write parity error\n", + dev->name); + + sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR); + } + + if (status & Y2_IS_PAR_MAC1) { + printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name); + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); + } + + if (status & Y2_IS_PAR_RX1) { + printk(KERN_ERR PFX "%s: RX parity error\n", dev->name); + sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR); + } + + if (status & Y2_IS_TCP_TXA1) { + printk(KERN_ERR PFX "%s: TCP segmentation error\n", dev->name); + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP); + } +} + +static void sky2_hw_intr(struct sky2_hw *hw) +{ + u32 status = sky2_read32(hw, B0_HWE_ISRC); + + if (status & Y2_IS_TIST_OV) + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + + if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { + u16 pci_err; + + pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err); + printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", + pci_name(hw->pdev), pci_err); + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_write_config_word(hw->pdev, PCI_STATUS, + pci_err | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + } + + if (status & Y2_IS_PCI_EXP) { + /* PCI-Express uncorrectable Error occurred */ + u32 pex_err; + + pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err); + + printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", + pci_name(hw->pdev), pex_err); + + /* clear the interrupt */ + sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + 0xffffffffUL); + sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + if (pex_err & PEX_FATAL_ERRORS) { + u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); + hwmsk &= ~Y2_IS_PCI_EXP; + sky2_write32(hw, B0_HWE_IMSK, hwmsk); + } + } + + if (status & Y2_HWE_L1_MASK) + sky2_hw_error(hw, 0, status); + status >>= 8; + if (status & Y2_HWE_L1_MASK) + sky2_hw_error(hw, 1, status); +} + +static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) +{ + struct net_device *dev = hw->dev[port]; + struct sky2_port *sky2 = netdev_priv(dev); + u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); + + if (netif_msg_intr(sky2)) + printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n", + dev->name, status); + + if (status & GM_IS_RX_FF_OR) { + ++sky2->net_stats.rx_fifo_errors; + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); + } + + if (status & GM_IS_TX_FF_UR) { + ++sky2->net_stats.tx_fifo_errors; + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); + } +} + +static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) +{ + struct net_device *dev = hw->dev[port]; + struct sky2_port *sky2 = netdev_priv(dev); + + hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + schedule_work(&sky2->phy_task); +} + +static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct sky2_hw *hw = dev_id; + struct net_device *dev0 = hw->dev[0]; + u32 status; + + status = sky2_read32(hw, B0_Y2_SP_ISRC2); + if (status == 0 || status == ~0) + return IRQ_NONE; + + if (status & Y2_IS_HW_ERR) + sky2_hw_intr(hw); + + /* Do NAPI for Rx and Tx status */ + if (status & Y2_IS_STAT_BMU) { + hw->intr_mask &= ~Y2_IS_STAT_BMU; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + + if (likely(__netif_rx_schedule_prep(dev0))) { + prefetch(&hw->st_le[hw->st_idx]); + __netif_rx_schedule(dev0); + } + } + + if (status & Y2_IS_IRQ_PHY1) + sky2_phy_intr(hw, 0); + + if (status & Y2_IS_IRQ_PHY2) + sky2_phy_intr(hw, 1); + + if (status & Y2_IS_IRQ_MAC1) + sky2_mac_intr(hw, 0); + + if (status & Y2_IS_IRQ_MAC2) + sky2_mac_intr(hw, 1); + + sky2_write32(hw, B0_Y2_SP_ICR, 2); + + sky2_read32(hw, B0_IMSK); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sky2_netpoll(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + sky2_intr(sky2->hw->pdev->irq, sky2->hw, NULL); +} +#endif + +/* Chip internal frequency for clock calculations */ +static inline u32 sky2_mhz(const struct sky2_hw *hw) +{ + switch (hw->chip_id) { + case CHIP_ID_YUKON_EC: + case CHIP_ID_YUKON_EC_U: + return 125; /* 125 Mhz */ + case CHIP_ID_YUKON_FE: + return 100; /* 100 Mhz */ + default: /* YUKON_XL */ + return 156; /* 156 Mhz */ + } +} + +static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) +{ + return sky2_mhz(hw) * us; +} + +static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) +{ + return clk / sky2_mhz(hw); +} + + +static int sky2_reset(struct sky2_hw *hw) +{ + u32 ctst; + u16 status; + u8 t8, pmd_type; + int i; + + ctst = sky2_read32(hw, B0_CTST); + + sky2_write8(hw, B0_CTST, CS_RST_CLR); + hw->chip_id = sky2_read8(hw, B2_CHIP_ID); + if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { + printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n", + pci_name(hw->pdev), hw->chip_id); + return -EOPNOTSUPP; + } + + /* ring for status responses */ + hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, + &hw->st_dma); + if (!hw->st_le) + return -ENOMEM; + + /* disable ASF */ + if (hw->chip_id <= CHIP_ID_YUKON_EC) { + sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); + sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); + } + + /* do a SW reset */ + sky2_write8(hw, B0_CTST, CS_RST_SET); + sky2_write8(hw, B0_CTST, CS_RST_CLR); + + /* clear PCI errors, if any */ + pci_read_config_word(hw->pdev, PCI_STATUS, &status); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_write_config_word(hw->pdev, PCI_STATUS, + status | PCI_STATUS_ERROR_BITS); + + sky2_write8(hw, B0_CTST, CS_MRST_CLR); + + /* clear any PEX errors */ + if (is_pciex(hw)) { + u16 lstat; + pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + 0xffffffffUL); + pci_read_config_word(hw->pdev, PEX_LNK_STAT, &lstat); + } + + pmd_type = sky2_read8(hw, B2_PMD_TYP); + hw->copper = !(pmd_type == 'L' || pmd_type == 'S'); + + hw->ports = 1; + t8 = sky2_read8(hw, B2_Y2_HW_RES); + if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { + if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) + ++hw->ports; + } + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + sky2_set_power_state(hw, PCI_D0); + + for (i = 0; i < hw->ports; i++) { + sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + /* Clear I2C IRQ noise */ + sky2_write32(hw, B2_I2C_IRQ, 1); + + /* turn off hardware timer (unused) */ + sky2_write8(hw, B2_TI_CTRL, TIM_STOP); + sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); + + sky2_write8(hw, B0_Y2LED, LED_STAT_ON); + + /* Turn off descriptor polling */ + sky2_write32(hw, B28_DPT_CTRL, DPT_STOP); + + /* Turn off receive timestamp */ + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + + /* enable the Tx Arbiters */ + for (i = 0; i < hw->ports; i++) + sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); + + /* Initialize ram interface */ + for (i = 0; i < hw->ports; i++) { + sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); + + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); + } + + sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); + + for (i = 0; i < hw->ports; i++) + sky2_phy_reset(hw, i); + + memset(hw->st_le, 0, STATUS_LE_BYTES); + hw->st_idx = 0; + + sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET); + sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); + + sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); + sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32); + + /* Set the list last index */ + sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); + + /* These status setup values are copied from SysKonnect's driver */ + if (is_ec_a1(hw)) { + /* WA for dev. #4.3 */ + sky2_write16(hw, STAT_TX_IDX_TH, 0xfff); /* Tx Threshold */ + + /* set Status-FIFO watermark */ + sky2_write8(hw, STAT_FIFO_WM, 0x21); /* WA for dev. #4.18 */ + + /* set Status-FIFO ISR watermark */ + sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07); /* WA for dev. #4.18 */ + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 10000)); + } else { + sky2_write16(hw, STAT_TX_IDX_TH, 10); + sky2_write8(hw, STAT_FIFO_WM, 16); + + /* set Status-FIFO ISR watermark */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) + sky2_write8(hw, STAT_FIFO_ISR_WM, 4); + else + sky2_write8(hw, STAT_FIFO_ISR_WM, 16); + + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); + sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); + sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); + } + + /* enable status unit */ + sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); + + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); + + return 0; +} + +static inline u32 sky2_supported_modes(const struct sky2_hw *hw) +{ + u32 modes; + if (hw->copper) { + modes = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; + + if (hw->chip_id != CHIP_ID_YUKON_FE) + modes |= SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full; + } else + modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + return modes; +} + +static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = sky2_supported_modes(hw); + ecmd->phy_address = PHY_ADDR_MARV; + if (hw->copper) { + ecmd->supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; + ecmd->port = PORT_TP; + } else + ecmd->port = PORT_FIBRE; + + ecmd->advertising = sky2->advertising; + ecmd->autoneg = sky2->autoneg; + ecmd->speed = sky2->speed; + ecmd->duplex = sky2->duplex; + return 0; +} + +static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + const struct sky2_hw *hw = sky2->hw; + u32 supported = sky2_supported_modes(hw); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + ecmd->advertising = supported; + sky2->duplex = -1; + sky2->speed = -1; + } else { + u32 setting; + + switch (ecmd->speed) { + case SPEED_1000: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_1000baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_1000baseT_Half; + else + return -EINVAL; + break; + case SPEED_100: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_100baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_100baseT_Half; + else + return -EINVAL; + break; + + case SPEED_10: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_10baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_10baseT_Half; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + if ((setting & supported) == 0) + return -EINVAL; + + sky2->speed = ecmd->speed; + sky2->duplex = ecmd->duplex; + } + + sky2->autoneg = ecmd->autoneg; + sky2->advertising = ecmd->advertising; + + if (netif_running(dev)) + sky2_phy_reinit(sky2); + + return 0; +} + +static void sky2_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(sky2->hw->pdev)); +} + +static const struct sky2_stat { + char name[ETH_GSTRING_LEN]; + u16 offset; +} sky2_stats[] = { + { "tx_bytes", GM_TXO_OK_HI }, + { "rx_bytes", GM_RXO_OK_HI }, + { "tx_broadcast", GM_TXF_BC_OK }, + { "rx_broadcast", GM_RXF_BC_OK }, + { "tx_multicast", GM_TXF_MC_OK }, + { "rx_multicast", GM_RXF_MC_OK }, + { "tx_unicast", GM_TXF_UC_OK }, + { "rx_unicast", GM_RXF_UC_OK }, + { "tx_mac_pause", GM_TXF_MPAUSE }, + { "rx_mac_pause", GM_RXF_MPAUSE }, + { "collisions", GM_TXF_SNG_COL }, + { "late_collision",GM_TXF_LAT_COL }, + { "aborted", GM_TXF_ABO_COL }, + { "multi_collisions", GM_TXF_MUL_COL }, + { "fifo_underrun", GM_TXE_FIFO_UR }, + { "fifo_overflow", GM_RXE_FIFO_OV }, + { "rx_toolong", GM_RXF_LNG_ERR }, + { "rx_jabber", GM_RXF_JAB_PKT }, + { "rx_runt", GM_RXE_FRAG }, + { "rx_too_long", GM_RXF_LNG_ERR }, + { "rx_fcs_error", GM_RXF_FCS_ERR }, +}; + +static u32 sky2_get_rx_csum(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + return sky2->rx_csum; +} + +static int sky2_set_rx_csum(struct net_device *dev, u32 data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + sky2->rx_csum = data; + + sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), + data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + + return 0; +} + +static u32 sky2_get_msglevel(struct net_device *netdev) +{ + struct sky2_port *sky2 = netdev_priv(netdev); + return sky2->msg_enable; +} + +static int sky2_nway_reset(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + if (sky2->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + sky2_phy_reinit(sky2); + + return 0; +} + +static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + int i; + + data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | (u64) gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | (u64) gma_read32(hw, port, GM_RXO_OK_LO); + + for (i = 2; i < count; i++) + data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset); +} + +static void sky2_set_msglevel(struct net_device *netdev, u32 value) +{ + struct sky2_port *sky2 = netdev_priv(netdev); + sky2->msg_enable = value; +} + +static int sky2_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(sky2_stats); +} + +static void sky2_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 * data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats)); +} + +static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data) +{ + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(sky2_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + sky2_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + +/* Use hardware MIB variables for critical path statistics and + * transmit feedback not reported at interrupt. + * Other errors are accounted for in interrupt handler. + */ +static struct net_device_stats *sky2_get_stats(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + u64 data[13]; + + sky2_phy_stats(sky2, data, ARRAY_SIZE(data)); + + sky2->net_stats.tx_bytes = data[0]; + sky2->net_stats.rx_bytes = data[1]; + sky2->net_stats.tx_packets = data[2] + data[4] + data[6]; + sky2->net_stats.rx_packets = data[3] + data[5] + data[7]; + sky2->net_stats.multicast = data[5] + data[7]; + sky2->net_stats.collisions = data[10]; + sky2->net_stats.tx_aborted_errors = data[12]; + + return &sky2->net_stats; +} + +static int sky2_set_mac_address(struct net_device *dev, void *p) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8, + dev->dev_addr, ETH_ALEN); + memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8, + dev->dev_addr, ETH_ALEN); + + if (netif_running(dev)) + sky2_phy_reinit(sky2); + + return 0; +} + +static void sky2_set_multicast(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + struct dev_mc_list *list = dev->mc_list; + u16 reg; + u8 filter[8]; + + memset(filter, 0, sizeof(filter)); + + reg = gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA; + + if (dev->flags & IFF_PROMISC) /* promiscuous */ + reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */ + memset(filter, 0xff, sizeof(filter)); + else if (dev->mc_count == 0) /* no multicast */ + reg &= ~GM_RXCR_MCF_ENA; + else { + int i; + reg |= GM_RXCR_MCF_ENA; + + for (i = 0; list && i < dev->mc_count; i++, list = list->next) { + u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; + filter[bit / 8] |= 1 << (bit % 8); + } + } + + gma_write16(hw, port, GM_MC_ADDR_H1, + (u16) filter[0] | ((u16) filter[1] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H2, + (u16) filter[2] | ((u16) filter[3] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H3, + (u16) filter[4] | ((u16) filter[5] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H4, + (u16) filter[6] | ((u16) filter[7] << 8)); + + gma_write16(hw, port, GM_RX_CTRL, reg); +} + +/* Can have one global because blinking is controlled by + * ethtool and that is always under RTNL mutex + */ +static void sky2_led(struct sky2_hw *hw, unsigned port, int on) +{ + u16 pg; + + switch (hw->chip_id) { + case CHIP_ID_YUKON_XL: + pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + on ? (PHY_M_LEDC_LOS_CTRL(1) | + PHY_M_LEDC_INIT_CTRL(7) | + PHY_M_LEDC_STA1_CTRL(7) | + PHY_M_LEDC_STA0_CTRL(7)) + : 0); + + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + break; + + default: + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, + on ? PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON) + : PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + + } +} + +/* blink LED's for finding board */ +static int sky2_phys_id(struct net_device *dev, u32 data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 ledctrl, ledover = 0; + long ms; + int interrupted; + int onoff = 1; + + if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) + ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); + else + ms = data * 1000; + + /* save initial values */ + down(&sky2->phy_sema); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else { + ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); + ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); + } + + interrupted = 0; + while (!interrupted && ms > 0) { + sky2_led(hw, port, onoff); + onoff = !onoff; + + up(&sky2->phy_sema); + interrupted = msleep_interruptible(250); + down(&sky2->phy_sema); + + ms -= 250; + } + + /* resume regularly scheduled programming */ + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else { + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + } + up(&sky2->phy_sema); + + return 0; +} + +static void sky2_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + ecmd->tx_pause = sky2->tx_pause; + ecmd->rx_pause = sky2->rx_pause; + ecmd->autoneg = sky2->autoneg; +} + +static int sky2_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + int err = 0; + + sky2->autoneg = ecmd->autoneg; + sky2->tx_pause = ecmd->tx_pause != 0; + sky2->rx_pause = ecmd->rx_pause != 0; + + sky2_phy_reinit(sky2); + + return err; +} + +#ifdef CONFIG_PM +static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + wol->supported = WAKE_MAGIC; + wol->wolopts = sky2->wol ? WAKE_MAGIC : 0; +} + +static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + return -EOPNOTSUPP; + + sky2->wol = wol->wolopts == WAKE_MAGIC; + + if (sky2->wol) { + memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN); + + sky2_write16(hw, WOL_CTRL_STAT, + WOL_CTL_ENA_PME_ON_MAGIC_PKT | + WOL_CTL_ENA_MAGIC_PKT_UNIT); + } else + sky2_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT); + + return 0; +} +#endif + +static int sky2_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP) + ecmd->tx_coalesce_usecs = 0; + else { + u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI); + ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks); + } + ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH); + + if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP) + ecmd->rx_coalesce_usecs = 0; + else { + u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI); + ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks); + } + ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM); + + if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP) + ecmd->rx_coalesce_usecs_irq = 0; + else { + u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI); + ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks); + } + + ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM); + + return 0; +} + +/* Note: this affect both ports */ +static int sky2_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + const u32 tmin = sky2_clk2us(hw, 1); + const u32 tmax = 5000; + + if (ecmd->tx_coalesce_usecs != 0 && + (ecmd->tx_coalesce_usecs < tmin || ecmd->tx_coalesce_usecs > tmax)) + return -EINVAL; + + if (ecmd->rx_coalesce_usecs != 0 && + (ecmd->rx_coalesce_usecs < tmin || ecmd->rx_coalesce_usecs > tmax)) + return -EINVAL; + + if (ecmd->rx_coalesce_usecs_irq != 0 && + (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax)) + return -EINVAL; + + if (ecmd->tx_max_coalesced_frames > 0xffff) + return -EINVAL; + if (ecmd->rx_max_coalesced_frames > 0xff) + return -EINVAL; + if (ecmd->rx_max_coalesced_frames_irq > 0xff) + return -EINVAL; + + if (ecmd->tx_coalesce_usecs == 0) + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_TX_TIMER_INI, + sky2_us2clk(hw, ecmd->tx_coalesce_usecs)); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } + sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames); + + if (ecmd->rx_coalesce_usecs == 0) + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_LEV_TIMER_INI, + sky2_us2clk(hw, ecmd->rx_coalesce_usecs)); + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); + } + sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames); + + if (ecmd->rx_coalesce_usecs_irq == 0) + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_TX_TIMER_INI, + sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq)); + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); + } + sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq); + return 0; +} + +static void sky2_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + ering->rx_max_pending = RX_MAX_PENDING; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + ering->tx_max_pending = TX_RING_SIZE - 1; + + ering->rx_pending = sky2->rx_pending; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + ering->tx_pending = sky2->tx_pending; +} + +static int sky2_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct sky2_port *sky2 = netdev_priv(dev); + int err = 0; + + if (ering->rx_pending > RX_MAX_PENDING || + ering->rx_pending < 8 || + ering->tx_pending < MAX_SKB_TX_LE || + ering->tx_pending > TX_RING_SIZE - 1) + return -EINVAL; + + if (netif_running(dev)) + sky2_down(dev); + + sky2->rx_pending = ering->rx_pending; + sky2->tx_pending = ering->tx_pending; + + if (netif_running(dev)) { + err = sky2_up(dev); + if (err) + dev_close(dev); + else + sky2_set_multicast(dev); + } + + return err; +} + +static int sky2_get_regs_len(struct net_device *dev) +{ + return 0x4000; +} + +/* + * Returns copy of control register region + * Note: access to the RAM address register set will cause timeouts. + */ +static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + const struct sky2_port *sky2 = netdev_priv(dev); + const void __iomem *io = sky2->hw->regs; + + BUG_ON(regs->len < B3_RI_WTO_R1); + regs->version = 1; + memset(p, 0, regs->len); + + memcpy_fromio(p, io, B3_RAM_ADDR); + + memcpy_fromio(p + B3_RI_WTO_R1, + io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); +} + +static struct ethtool_ops sky2_ethtool_ops = { + .get_settings = sky2_get_settings, + .set_settings = sky2_set_settings, + .get_drvinfo = sky2_get_drvinfo, + .get_msglevel = sky2_get_msglevel, + .set_msglevel = sky2_set_msglevel, + .nway_reset = sky2_nway_reset, + .get_regs_len = sky2_get_regs_len, + .get_regs = sky2_get_regs, + .get_link = ethtool_op_get_link, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_rx_csum = sky2_get_rx_csum, + .set_rx_csum = sky2_set_rx_csum, + .get_strings = sky2_get_strings, + .get_coalesce = sky2_get_coalesce, + .set_coalesce = sky2_set_coalesce, + .get_ringparam = sky2_get_ringparam, + .set_ringparam = sky2_set_ringparam, + .get_pauseparam = sky2_get_pauseparam, + .set_pauseparam = sky2_set_pauseparam, +#ifdef CONFIG_PM + .get_wol = sky2_get_wol, + .set_wol = sky2_set_wol, +#endif + .phys_id = sky2_phys_id, + .get_stats_count = sky2_get_stats_count, + .get_ethtool_stats = sky2_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, +}; + +/* Initialize network device */ +static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, + unsigned port, int highmem) +{ + struct sky2_port *sky2; + struct net_device *dev = alloc_etherdev(sizeof(*sky2)); + + if (!dev) { + printk(KERN_ERR "sky2 etherdev alloc failed"); + return NULL; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &hw->pdev->dev); + dev->irq = hw->pdev->irq; + dev->open = sky2_up; + dev->stop = sky2_down; + dev->do_ioctl = sky2_ioctl; + dev->hard_start_xmit = sky2_xmit_frame; + dev->get_stats = sky2_get_stats; + dev->set_multicast_list = sky2_set_multicast; + dev->set_mac_address = sky2_set_mac_address; + dev->change_mtu = sky2_change_mtu; + SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops); + dev->tx_timeout = sky2_tx_timeout; + dev->watchdog_timeo = TX_WATCHDOG; + if (port == 0) + dev->poll = sky2_poll; + dev->weight = NAPI_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sky2_netpoll; +#endif + + sky2 = netdev_priv(dev); + sky2->netdev = dev; + sky2->hw = hw; + sky2->msg_enable = netif_msg_init(debug, default_msg); + + spin_lock_init(&sky2->tx_lock); + /* Auto speed and flow control */ + sky2->autoneg = AUTONEG_ENABLE; + sky2->tx_pause = 1; + sky2->rx_pause = 1; + sky2->duplex = -1; + sky2->speed = -1; + sky2->advertising = sky2_supported_modes(hw); + + /* Receive checksum disabled for Yukon XL + * because of observed problems with incorrect + * values when multiple packets are received in one interrupt + */ + sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL); + + INIT_WORK(&sky2->phy_task, sky2_phy_task, sky2); + init_MUTEX(&sky2->phy_sema); + sky2->tx_pending = TX_DEF_PENDING; + sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING; + sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); + + hw->dev[port] = dev; + + sky2->port = port; + + dev->features |= NETIF_F_LLTX; + if (hw->chip_id != CHIP_ID_YUKON_EC_U) + dev->features |= NETIF_F_TSO; + if (highmem) + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + +#ifdef SKY2_VLAN_TAG_USED + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = sky2_vlan_rx_register; + dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid; +#endif + + /* read the mac address */ + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + /* device is off until link detection */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + return dev; +} + +static inline void sky2_show_addr(struct net_device *dev) +{ + const struct sky2_port *sky2 = netdev_priv(dev); + + if (netif_msg_probe(sky2)) + printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +} + +static int __devinit sky2_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev, *dev1 = NULL; + struct sky2_hw *hw; + int err, pm_cap, using_dac = 0; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "%s cannot enable PCI device\n", + pci_name(pdev)); + goto err_out; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_out; + } + + pci_set_master(pdev); + + /* Find power-management capability. */ + pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pm_cap == 0) { + printk(KERN_ERR PFX "Cannot find PowerManagement capability, " + "aborting.\n"); + err = -EIO; + goto err_out_free_regions; + } + + if (sizeof(dma_addr_t) > sizeof(u32)) { + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + using_dac = 1; + } + + if (!using_dac) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + printk(KERN_ERR PFX "%s no usable DMA configuration\n", + pci_name(pdev)); + goto err_out_free_regions; + } + } +#ifdef __BIG_ENDIAN + /* byte swap descriptors in hardware */ + { + u32 reg; + + pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + reg |= PCI_REV_DESC; + pci_write_config_dword(pdev, PCI_DEV_REG2, reg); + } +#endif + + err = -ENOMEM; + hw = kmalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) { + printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n", + pci_name(pdev)); + goto err_out_free_regions; + } + + memset(hw, 0, sizeof(*hw)); + hw->pdev = pdev; + + hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); + if (!hw->regs) { + printk(KERN_ERR PFX "%s: cannot map device registers\n", + pci_name(pdev)); + goto err_out_free_hw; + } + hw->pm_cap = pm_cap; + + err = sky2_reset(hw); + if (err) + goto err_out_iounmap; + + printk(KERN_INFO PFX "v%s addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n", + DRV_VERSION, pci_resource_start(pdev, 0), pdev->irq, + yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], + hw->chip_id, hw->chip_rev); + + dev = sky2_init_netdev(hw, 0, using_dac); + if (!dev) + goto err_out_free_pci; + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "%s: cannot register net device\n", + pci_name(pdev)); + goto err_out_free_netdev; + } + + sky2_show_addr(dev); + + if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) { + if (register_netdev(dev1) == 0) + sky2_show_addr(dev1); + else { + /* Failure to register second port need not be fatal */ + printk(KERN_WARNING PFX + "register of second port failed\n"); + hw->dev[1] = NULL; + free_netdev(dev1); + } + } + + err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_unregister; + } + + hw->intr_mask = Y2_IS_BASE; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + + pci_set_drvdata(pdev, hw); + + return 0; + +err_out_unregister: + if (dev1) { + unregister_netdev(dev1); + free_netdev(dev1); + } + unregister_netdev(dev); +err_out_free_netdev: + free_netdev(dev); +err_out_free_pci: + sky2_write8(hw, B0_CTST, CS_RST_SET); + pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); +err_out_iounmap: + iounmap(hw->regs); +err_out_free_hw: + kfree(hw); +err_out_free_regions: + pci_release_regions(pdev); + pci_disable_device(pdev); +err_out: + return err; +} + +static void __devexit sky2_remove(struct pci_dev *pdev) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + struct net_device *dev0, *dev1; + + if (!hw) + return; + + dev0 = hw->dev[0]; + dev1 = hw->dev[1]; + if (dev1) + unregister_netdev(dev1); + unregister_netdev(dev0); + + sky2_write32(hw, B0_IMSK, 0); + sky2_set_power_state(hw, PCI_D3hot); + sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + sky2_write8(hw, B0_CTST, CS_RST_SET); + sky2_read8(hw, B0_CTST); + + free_irq(pdev->irq, hw); + pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); + pci_release_regions(pdev); + pci_disable_device(pdev); + + if (dev1) + free_netdev(dev1); + free_netdev(dev0); + iounmap(hw->regs); + kfree(hw); + + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + int i; + + for (i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + + if (dev) { + if (!netif_running(dev)) + continue; + + sky2_down(dev); + netif_device_detach(dev); + } + } + + return sky2_set_power_state(hw, pci_choose_state(pdev, state)); +} + +static int sky2_resume(struct pci_dev *pdev) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + int i; + + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + sky2_set_power_state(hw, PCI_D0); + + sky2_reset(hw); + + for (i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + if (dev) { + if (netif_running(dev)) { + netif_device_attach(dev); + if (sky2_up(dev)) + dev_close(dev); + } + } + } + return 0; +} +#endif + +static struct pci_driver sky2_driver = { + .name = DRV_NAME, + .id_table = sky2_id_table, + .probe = sky2_probe, + .remove = __devexit_p(sky2_remove), +#ifdef CONFIG_PM + .suspend = sky2_suspend, + .resume = sky2_resume, +#endif +}; + +static int __init sky2_init_module(void) +{ + return pci_register_driver(&sky2_driver); +} + +static void __exit sky2_cleanup_module(void) +{ + pci_unregister_driver(&sky2_driver); +} + +module_init(sky2_init_module); +module_exit(sky2_cleanup_module); + +MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); +MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h new file mode 100644 index 000000000000..95518921001c --- /dev/null +++ b/drivers/net/sky2.h @@ -0,0 +1,1922 @@ +/* + * Definitions for the new Marvell Yukon 2 driver. + */ +#ifndef _SKY2_H +#define _SKY2_H + +/* PCI config registers */ +#define PCI_DEV_REG1 0x40 +#define PCI_DEV_REG2 0x44 +#define PCI_DEV_STATUS 0x7c +#define PCI_OS_PCI_X (1<<26) + +#define PEX_LNK_STAT 0xf2 +#define PEX_UNC_ERR_STAT 0x104 +#define PEX_DEV_CTRL 0xe8 + +/* Yukon-2 */ +enum pci_dev_reg_1 { + PCI_Y2_PIG_ENA = 1<<31, /* Enable Plug-in-Go (YUKON-2) */ + PCI_Y2_DLL_DIS = 1<<30, /* Disable PCI DLL (YUKON-2) */ + PCI_Y2_PHY2_COMA = 1<<29, /* Set PHY 2 to Coma Mode (YUKON-2) */ + PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */ + PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */ + PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */ +}; + +enum pci_dev_reg_2 { + PCI_VPD_WR_THR = 0xffL<<24, /* Bit 31..24: VPD Write Threshold */ + PCI_DEV_SEL = 0x7fL<<17, /* Bit 23..17: EEPROM Device Select */ + PCI_VPD_ROM_SZ = 7L<<14, /* Bit 16..14: VPD ROM Size */ + + PCI_PATCH_DIR = 0xfL<<8, /* Bit 11.. 8: Ext Patches dir 3..0 */ + PCI_EXT_PATCHS = 0xfL<<4, /* Bit 7.. 4: Extended Patches 3..0 */ + PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ + PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ + + PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ +}; + + +#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_PARITY) + +enum pex_dev_ctrl { + PEX_DC_MAX_RRS_MSK = 7<<12, /* Bit 14..12: Max. Read Request Size */ + PEX_DC_EN_NO_SNOOP = 1<<11,/* Enable No Snoop */ + PEX_DC_EN_AUX_POW = 1<<10,/* Enable AUX Power */ + PEX_DC_EN_PHANTOM = 1<<9, /* Enable Phantom Functions */ + PEX_DC_EN_EXT_TAG = 1<<8, /* Enable Extended Tag Field */ + PEX_DC_MAX_PLS_MSK = 7<<5, /* Bit 7.. 5: Max. Payload Size Mask */ + PEX_DC_EN_REL_ORD = 1<<4, /* Enable Relaxed Ordering */ + PEX_DC_EN_UNS_RQ_RP = 1<<3, /* Enable Unsupported Request Reporting */ + PEX_DC_EN_FAT_ER_RP = 1<<2, /* Enable Fatal Error Reporting */ + PEX_DC_EN_NFA_ER_RP = 1<<1, /* Enable Non-Fatal Error Reporting */ + PEX_DC_EN_COR_ER_RP = 1<<0, /* Enable Correctable Error Reporting */ +}; +#define PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK) + +/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ +enum pex_err { + PEX_UNSUP_REQ = 1<<20, /* Unsupported Request Error */ + + PEX_MALFOR_TLP = 1<<18, /* Malformed TLP */ + + PEX_UNEXP_COMP = 1<<16, /* Unexpected Completion */ + + PEX_COMP_TO = 1<<14, /* Completion Timeout */ + PEX_FLOW_CTRL_P = 1<<13, /* Flow Control Protocol Error */ + PEX_POIS_TLP = 1<<12, /* Poisoned TLP */ + + PEX_DATA_LINK_P = 1<<4, /* Data Link Protocol Error */ + PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P), +}; + + +enum csr_regs { + B0_RAP = 0x0000, + B0_CTST = 0x0004, + B0_Y2LED = 0x0005, + B0_POWER_CTRL = 0x0007, + B0_ISRC = 0x0008, + B0_IMSK = 0x000c, + B0_HWE_ISRC = 0x0010, + B0_HWE_IMSK = 0x0014, + + /* Special ISR registers (Yukon-2 only) */ + B0_Y2_SP_ISRC2 = 0x001c, + B0_Y2_SP_ISRC3 = 0x0020, + B0_Y2_SP_EISR = 0x0024, + B0_Y2_SP_LISR = 0x0028, + B0_Y2_SP_ICR = 0x002c, + + B2_MAC_1 = 0x0100, + B2_MAC_2 = 0x0108, + B2_MAC_3 = 0x0110, + B2_CONN_TYP = 0x0118, + B2_PMD_TYP = 0x0119, + B2_MAC_CFG = 0x011a, + B2_CHIP_ID = 0x011b, + B2_E_0 = 0x011c, + + B2_Y2_CLK_GATE = 0x011d, + B2_Y2_HW_RES = 0x011e, + B2_E_3 = 0x011f, + B2_Y2_CLK_CTRL = 0x0120, + + B2_TI_INI = 0x0130, + B2_TI_VAL = 0x0134, + B2_TI_CTRL = 0x0138, + B2_TI_TEST = 0x0139, + + B2_TST_CTRL1 = 0x0158, + B2_TST_CTRL2 = 0x0159, + B2_GP_IO = 0x015c, + + B2_I2C_CTRL = 0x0160, + B2_I2C_DATA = 0x0164, + B2_I2C_IRQ = 0x0168, + B2_I2C_SW = 0x016c, + + B3_RAM_ADDR = 0x0180, + B3_RAM_DATA_LO = 0x0184, + B3_RAM_DATA_HI = 0x0188, + +/* RAM Interface Registers */ +/* Yukon-2: use RAM_BUFFER() to access the RAM buffer */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define RAM_BUFFER(port, reg) (reg | (port <<6)) + + B3_RI_WTO_R1 = 0x0190, + B3_RI_WTO_XA1 = 0x0191, + B3_RI_WTO_XS1 = 0x0192, + B3_RI_RTO_R1 = 0x0193, + B3_RI_RTO_XA1 = 0x0194, + B3_RI_RTO_XS1 = 0x0195, + B3_RI_WTO_R2 = 0x0196, + B3_RI_WTO_XA2 = 0x0197, + B3_RI_WTO_XS2 = 0x0198, + B3_RI_RTO_R2 = 0x0199, + B3_RI_RTO_XA2 = 0x019a, + B3_RI_RTO_XS2 = 0x019b, + B3_RI_TO_VAL = 0x019c, + B3_RI_CTRL = 0x01a0, + B3_RI_TEST = 0x01a2, + B3_MA_TOINI_RX1 = 0x01b0, + B3_MA_TOINI_RX2 = 0x01b1, + B3_MA_TOINI_TX1 = 0x01b2, + B3_MA_TOINI_TX2 = 0x01b3, + B3_MA_TOVAL_RX1 = 0x01b4, + B3_MA_TOVAL_RX2 = 0x01b5, + B3_MA_TOVAL_TX1 = 0x01b6, + B3_MA_TOVAL_TX2 = 0x01b7, + B3_MA_TO_CTRL = 0x01b8, + B3_MA_TO_TEST = 0x01ba, + B3_MA_RCINI_RX1 = 0x01c0, + B3_MA_RCINI_RX2 = 0x01c1, + B3_MA_RCINI_TX1 = 0x01c2, + B3_MA_RCINI_TX2 = 0x01c3, + B3_MA_RCVAL_RX1 = 0x01c4, + B3_MA_RCVAL_RX2 = 0x01c5, + B3_MA_RCVAL_TX1 = 0x01c6, + B3_MA_RCVAL_TX2 = 0x01c7, + B3_MA_RC_CTRL = 0x01c8, + B3_MA_RC_TEST = 0x01ca, + B3_PA_TOINI_RX1 = 0x01d0, + B3_PA_TOINI_RX2 = 0x01d4, + B3_PA_TOINI_TX1 = 0x01d8, + B3_PA_TOINI_TX2 = 0x01dc, + B3_PA_TOVAL_RX1 = 0x01e0, + B3_PA_TOVAL_RX2 = 0x01e4, + B3_PA_TOVAL_TX1 = 0x01e8, + B3_PA_TOVAL_TX2 = 0x01ec, + B3_PA_CTRL = 0x01f0, + B3_PA_TEST = 0x01f2, + + Y2_CFG_SPC = 0x1c00, +}; + +/* B0_CTST 16 bit Control/Status register */ +enum { + Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */ + Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */ + Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */ + Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */ + Y2_CLK_RUN_ENA = 1<<11,/* CLK_RUN Enable (YUKON-2 only) */ + Y2_CLK_RUN_DIS = 1<<10,/* CLK_RUN Disable (YUKON-2 only) */ + Y2_LED_STAT_ON = 1<<9, /* Status LED On (YUKON-2 only) */ + Y2_LED_STAT_OFF = 1<<8, /* Status LED Off (YUKON-2 only) */ + + CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */ + CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */ + CS_STOP_DONE = 1<<5, /* Stop Master is finished */ + CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */ + CS_MRST_CLR = 1<<3, /* Clear Master reset */ + CS_MRST_SET = 1<<2, /* Set Master reset */ + CS_RST_CLR = 1<<1, /* Clear Software reset */ + CS_RST_SET = 1, /* Set Software reset */ +}; + +/* B0_LED 8 Bit LED register */ +enum { +/* Bit 7.. 2: reserved */ + LED_STAT_ON = 1<<1, /* Status LED on */ + LED_STAT_OFF = 1, /* Status LED off */ +}; + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +enum { + PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */ + PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */ + PC_VCC_ENA = 1<<5, /* Switch VCC Enable */ + PC_VCC_DIS = 1<<4, /* Switch VCC Disable */ + PC_VAUX_ON = 1<<3, /* Switch VAUX On */ + PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */ + PC_VCC_ON = 1<<1, /* Switch VCC On */ + PC_VCC_OFF = 1<<0, /* Switch VCC Off */ +}; + +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ + +/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ +/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ +/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ +/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ +enum { + Y2_IS_HW_ERR = 1<<31, /* Interrupt HW Error */ + Y2_IS_STAT_BMU = 1<<30, /* Status BMU Interrupt */ + Y2_IS_ASF = 1<<29, /* ASF subsystem Interrupt */ + + Y2_IS_POLL_CHK = 1<<27, /* Check IRQ from polling unit */ + Y2_IS_TWSI_RDY = 1<<26, /* IRQ on end of TWSI Tx */ + Y2_IS_IRQ_SW = 1<<25, /* SW forced IRQ */ + Y2_IS_TIMINT = 1<<24, /* IRQ from Timer */ + + Y2_IS_IRQ_PHY2 = 1<<12, /* Interrupt from PHY 2 */ + Y2_IS_IRQ_MAC2 = 1<<11, /* Interrupt from MAC 2 */ + Y2_IS_CHK_RX2 = 1<<10, /* Descriptor error Rx 2 */ + Y2_IS_CHK_TXS2 = 1<<9, /* Descriptor error TXS 2 */ + Y2_IS_CHK_TXA2 = 1<<8, /* Descriptor error TXA 2 */ + + Y2_IS_IRQ_PHY1 = 1<<4, /* Interrupt from PHY 1 */ + Y2_IS_IRQ_MAC1 = 1<<3, /* Interrupt from MAC 1 */ + Y2_IS_CHK_RX1 = 1<<2, /* Descriptor error Rx 1 */ + Y2_IS_CHK_TXS1 = 1<<1, /* Descriptor error TXS 1 */ + Y2_IS_CHK_TXA1 = 1<<0, /* Descriptor error TXA 1 */ + + Y2_IS_BASE = Y2_IS_HW_ERR | Y2_IS_STAT_BMU | + Y2_IS_POLL_CHK | Y2_IS_TWSI_RDY | + Y2_IS_IRQ_SW | Y2_IS_TIMINT, + Y2_IS_PORT_1 = Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | + Y2_IS_CHK_RX1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXS1, + Y2_IS_PORT_2 = Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | + Y2_IS_CHK_RX2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_TXS2, +}; + +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +enum { + IS_ERR_MSK = 0x00003fff,/* All Error bits */ + + IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */ + IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */ + IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */ + IS_IRQ_STAT = 1<<10, /* IRQ status exception */ + IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */ + IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */ + IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */ + IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */ + IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */ + IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */ + IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */ + IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */ + IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */ + IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */ +}; + +/* Hardware error interrupt mask for Yukon 2 */ +enum { + Y2_IS_TIST_OV = 1<<29,/* Time Stamp Timer overflow interrupt */ + Y2_IS_SENSOR = 1<<28, /* Sensor interrupt */ + Y2_IS_MST_ERR = 1<<27, /* Master error interrupt */ + Y2_IS_IRQ_STAT = 1<<26, /* Status exception interrupt */ + Y2_IS_PCI_EXP = 1<<25, /* PCI-Express interrupt */ + Y2_IS_PCI_NEXP = 1<<24, /* PCI-Express error similar to PCI error */ + /* Link 2 */ + Y2_IS_PAR_RD2 = 1<<13, /* Read RAM parity error interrupt */ + Y2_IS_PAR_WR2 = 1<<12, /* Write RAM parity error interrupt */ + Y2_IS_PAR_MAC2 = 1<<11, /* MAC hardware fault interrupt */ + Y2_IS_PAR_RX2 = 1<<10, /* Parity Error Rx Queue 2 */ + Y2_IS_TCP_TXS2 = 1<<9, /* TCP length mismatch sync Tx queue IRQ */ + Y2_IS_TCP_TXA2 = 1<<8, /* TCP length mismatch async Tx queue IRQ */ + /* Link 1 */ + Y2_IS_PAR_RD1 = 1<<5, /* Read RAM parity error interrupt */ + Y2_IS_PAR_WR1 = 1<<4, /* Write RAM parity error interrupt */ + Y2_IS_PAR_MAC1 = 1<<3, /* MAC hardware fault interrupt */ + Y2_IS_PAR_RX1 = 1<<2, /* Parity Error Rx Queue 1 */ + Y2_IS_TCP_TXS1 = 1<<1, /* TCP length mismatch sync Tx queue IRQ */ + Y2_IS_TCP_TXA1 = 1<<0, /* TCP length mismatch async Tx queue IRQ */ + + Y2_HWE_L1_MASK = Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 | + Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1, + Y2_HWE_L2_MASK = Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | + Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2, + + Y2_HWE_ALL_MASK = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | + Y2_IS_PCI_EXP | + Y2_HWE_L1_MASK | Y2_HWE_L2_MASK, +}; + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ +enum { + DPT_START = 1<<1, + DPT_STOP = 1<<0, +}; + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +enum { + TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */ + TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */ + TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */ + TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */ + TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */ + TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */ + TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */ + TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */ +}; + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +enum { + CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ + CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */ + CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/ +}; + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +enum { + CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */ + CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */ + CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ + CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ + CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ + CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */ + CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ + CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ + + CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ + CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ + CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ +}; + +/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ +enum { + Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactive (0 = active) */ + Y2_CLK_GAT_LNK2_DIS = 1<<6, /* Disable clock gating Link 2 */ + Y2_COR_CLK_LNK2_DIS = 1<<5, /* Disable Core clock Link 2 */ + Y2_PCI_CLK_LNK2_DIS = 1<<4, /* Disable PCI clock Link 2 */ + Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactive (0 = active) */ + Y2_CLK_GAT_LNK1_DIS = 1<<2, /* Disable clock gating Link 1 */ + Y2_COR_CLK_LNK1_DIS = 1<<1, /* Disable Core clock Link 1 */ + Y2_PCI_CLK_LNK1_DIS = 1<<0, /* Disable PCI clock Link 1 */ +}; + +/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ +enum { + CFG_LED_MODE_MSK = 7<<2, /* Bit 4.. 2: LED Mode Mask */ + CFG_LINK_2_AVAIL = 1<<1, /* Link 2 available */ + CFG_LINK_1_AVAIL = 1<<0, /* Link 1 available */ +}; +#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) +#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) + + +/* B2_Y2_CLK_CTRL 32 bit Clock Frequency Control Register (Yukon-2/EC) */ +enum { + Y2_CLK_DIV_VAL_MSK = 0xff<<16,/* Bit 23..16: Clock Divisor Value */ +#define Y2_CLK_DIV_VAL(x) (((x)<<16) & Y2_CLK_DIV_VAL_MSK) + Y2_CLK_DIV_VAL2_MSK = 7<<21, /* Bit 23..21: Clock Divisor Value */ + Y2_CLK_SELECT2_MSK = 0x1f<<16,/* Bit 20..16: Clock Select */ +#define Y2_CLK_DIV_VAL_2(x) (((x)<<21) & Y2_CLK_DIV_VAL2_MSK) +#define Y2_CLK_SEL_VAL_2(x) (((x)<<16) & Y2_CLK_SELECT2_MSK) + Y2_CLK_DIV_ENA = 1<<1, /* Enable Core Clock Division */ + Y2_CLK_DIV_DIS = 1<<0, /* Disable Core Clock Division */ +}; + +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ +enum { + TIM_START = 1<<2, /* Start Timer */ + TIM_STOP = 1<<1, /* Stop Timer */ + TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */ +}; + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ +enum { + TIM_T_ON = 1<<2, /* Test mode on */ + TIM_T_OFF = 1<<1, /* Test mode off */ + TIM_T_STEP = 1<<0, /* Test step */ +}; + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ +/* RAM Interface Registers */ + +/* B3_RI_CTRL 16 bit RAM Interface Control Register */ +enum { + RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */ + RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/ + + RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */ + RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ +}; + +#define SK_RI_TO_53 36 /* RAM interface timeout */ + + +/* Port related registers FIFO, and Arbiter */ +#define SK_REG(port,reg) (((port)<<7)+(reg)) + +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + +#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +enum { + TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */ + TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */ + TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */ + TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */ + TXA_START_RC = 1<<3, /* Start sync Rate Control */ + TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */ + TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */ + TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */ +}; + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ +enum { + TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/ + TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */ + TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */ + TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */ + TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */ + TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */ + TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */ +}; + + +enum { + B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */ + B7_CFG_SPC = 0x0380,/* copy of the Configuration register */ + B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */ + B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */ + B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */ + B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */ + B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */ + B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */ + B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */ +}; + +/* Queue Register Offsets, use Q_ADDR() to access */ +enum { + B8_Q_REGS = 0x0400, /* base of Queue registers */ + Q_D = 0x00, /* 8*32 bit Current Descriptor */ + Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */ + Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */ + Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */ + Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */ + Q_BC = 0x30, /* 32 bit Current Byte Counter */ + Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */ + Q_F = 0x38, /* 32 bit Flag Register */ + Q_T1 = 0x3c, /* 32 bit Test Register 1 */ + Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */ + Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */ + Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */ + Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */ + Q_T2 = 0x40, /* 32 bit Test Register 2 */ + Q_T3 = 0x44, /* 32 bit Test Register 3 */ + +/* Yukon-2 */ + Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ + Q_WM = 0x40, /* 16 bit FIFO Watermark */ + Q_AL = 0x42, /* 8 bit FIFO Alignment */ + Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ + Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ + Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ + Q_RL = 0x4a, /* 8 bit FIFO Read Level */ + Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ + Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ + Q_WL = 0x4e, /* 8 bit FIFO Write Level */ + Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ +}; +#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) + + +/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ +enum { + Y2_B8_PREF_REGS = 0x0450, + + PREF_UNIT_CTRL = 0x00, /* 32 bit Control register */ + PREF_UNIT_LAST_IDX = 0x04, /* 16 bit Last Index */ + PREF_UNIT_ADDR_LO = 0x08, /* 32 bit List start addr, low part */ + PREF_UNIT_ADDR_HI = 0x0c, /* 32 bit List start addr, high part*/ + PREF_UNIT_GET_IDX = 0x10, /* 16 bit Get Index */ + PREF_UNIT_PUT_IDX = 0x14, /* 16 bit Put Index */ + PREF_UNIT_FIFO_WP = 0x20, /* 8 bit FIFO write pointer */ + PREF_UNIT_FIFO_RP = 0x24, /* 8 bit FIFO read pointer */ + PREF_UNIT_FIFO_WM = 0x28, /* 8 bit FIFO watermark */ + PREF_UNIT_FIFO_LEV = 0x2c, /* 8 bit FIFO level */ + + PREF_UNIT_MASK_IDX = 0x0fff, +}; +#define Y2_QADDR(q,reg) (Y2_B8_PREF_REGS + (q) + (reg)) + +/* RAM Buffer Register Offsets */ +enum { + + RB_START = 0x00,/* 32 bit RAM Buffer Start Address */ + RB_END = 0x04,/* 32 bit RAM Buffer End Address */ + RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */ + RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */ + RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ + RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ + RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */ + RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ + RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */ + RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */ + RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */ + RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */ + RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */ +}; + +/* Receive and Transmit Queues */ +enum { + Q_R1 = 0x0000, /* Receive Queue 1 */ + Q_R2 = 0x0080, /* Receive Queue 2 */ + Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */ + Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */ + Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */ + Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */ +}; + +/* Different PHY Types */ +enum { + PHY_ADDR_MARV = 0, +}; + +#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) + + +enum { + LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */ + LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */ + LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */ + LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */ + + LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */ + +/* Receive GMAC FIFO (YUKON and Yukon-2) */ + + RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ + RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ + RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ + RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ + RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ + RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ + RX_GMF_UP_THR = 0x0c58,/* 8 bit Rx Upper Pause Thr (Yukon-EC_U) */ + RX_GMF_LP_THR = 0x0c5a,/* 8 bit Rx Lower Pause Thr (Yukon-EC_U) */ + RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ + RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ + + RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ + + RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ + + RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ +}; + + +/* Q_BC 32 bit Current Byte Counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + +/* Rx BMU Control / Status Registers (Yukon-2) */ +enum { + BMU_IDLE = 1<<31, /* BMU Idle State */ + BMU_RX_TCP_PKT = 1<<30, /* Rx TCP Packet (when RSS Hash enabled) */ + BMU_RX_IP_PKT = 1<<29, /* Rx IP Packet (when RSS Hash enabled) */ + + BMU_ENA_RX_RSS_HASH = 1<<15, /* Enable Rx RSS Hash */ + BMU_DIS_RX_RSS_HASH = 1<<14, /* Disable Rx RSS Hash */ + BMU_ENA_RX_CHKSUM = 1<<13, /* Enable Rx TCP/IP Checksum Check */ + BMU_DIS_RX_CHKSUM = 1<<12, /* Disable Rx TCP/IP Checksum Check */ + BMU_CLR_IRQ_PAR = 1<<11, /* Clear IRQ on Parity errors (Rx) */ + BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment. error (Tx) */ + BMU_CLR_IRQ_CHK = 1<<10, /* Clear IRQ Check */ + BMU_STOP = 1<<9, /* Stop Rx/Tx Queue */ + BMU_START = 1<<8, /* Start Rx/Tx Queue */ + BMU_FIFO_OP_ON = 1<<7, /* FIFO Operational On */ + BMU_FIFO_OP_OFF = 1<<6, /* FIFO Operational Off */ + BMU_FIFO_ENA = 1<<5, /* Enable FIFO */ + BMU_FIFO_RST = 1<<4, /* Reset FIFO */ + BMU_OP_ON = 1<<3, /* BMU Operational On */ + BMU_OP_OFF = 1<<2, /* BMU Operational Off */ + BMU_RST_CLR = 1<<1, /* Clear BMU Reset (Enable) */ + BMU_RST_SET = 1<<0, /* Set BMU Reset */ + + BMU_CLR_RESET = BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR, + BMU_OPER_INIT = BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | + BMU_FIFO_ENA | BMU_OP_ON, + + BMU_WM_DEFAULT = 0x600, +}; + +/* Tx BMU Control / Status Registers (Yukon-2) */ + /* Bit 31: same as for Rx */ +enum { + BMU_TX_IPIDINCR_ON = 1<<13, /* Enable IP ID Increment */ + BMU_TX_IPIDINCR_OFF = 1<<12, /* Disable IP ID Increment */ + BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment length mismatch */ +}; + +/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ +/* PREF_UNIT_CTRL 32 bit Prefetch Control register */ +enum { + PREF_UNIT_OP_ON = 1<<3, /* prefetch unit operational */ + PREF_UNIT_OP_OFF = 1<<2, /* prefetch unit not operational */ + PREF_UNIT_RST_CLR = 1<<1, /* Clear Prefetch Unit Reset */ + PREF_UNIT_RST_SET = 1<<0, /* Set Prefetch Unit Reset */ +}; + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ +enum { + RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */ + RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */ + RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */ + RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */ +}; + + +/* Transmit GMAC FIFO (YUKON only) */ +enum { + TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */ + TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ + TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */ + + TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */ + TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ + TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */ + + TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */ + TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */ + TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */ +}; + +/* Descriptor Poll Timer Registers */ +enum { + B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */ + B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */ + B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */ + + B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */ +}; + +/* Time Stamp Timer Registers (YUKON only) */ +enum { + GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */ + GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */ + GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ +}; + +/* Polling Unit Registers (Yukon-2 only) */ +enum { + POLL_CTRL = 0x0e20, /* 32 bit Polling Unit Control Reg */ + POLL_LAST_IDX = 0x0e24,/* 16 bit Polling Unit List Last Index */ + + POLL_LIST_ADDR_LO= 0x0e28,/* 32 bit Poll. List Start Addr (low) */ + POLL_LIST_ADDR_HI= 0x0e2c,/* 32 bit Poll. List Start Addr (high) */ +}; + +/* ASF Subsystem Registers (Yukon-2 only) */ +enum { + B28_Y2_SMB_CONFIG = 0x0e40,/* 32 bit ASF SMBus Config Register */ + B28_Y2_SMB_CSD_REG = 0x0e44,/* 32 bit ASF SMB Control/Status/Data */ + B28_Y2_ASF_IRQ_V_BASE=0x0e60,/* 32 bit ASF IRQ Vector Base */ + + B28_Y2_ASF_STAT_CMD= 0x0e68,/* 32 bit ASF Status and Command Reg */ + B28_Y2_ASF_HOST_COM= 0x0e6c,/* 32 bit ASF Host Communication Reg */ + B28_Y2_DATA_REG_1 = 0x0e70,/* 32 bit ASF/Host Data Register 1 */ + B28_Y2_DATA_REG_2 = 0x0e74,/* 32 bit ASF/Host Data Register 2 */ + B28_Y2_DATA_REG_3 = 0x0e78,/* 32 bit ASF/Host Data Register 3 */ + B28_Y2_DATA_REG_4 = 0x0e7c,/* 32 bit ASF/Host Data Register 4 */ +}; + +/* Status BMU Registers (Yukon-2 only)*/ +enum { + STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ + STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ + + STAT_LIST_ADDR_LO= 0x0e88,/* 32 bit Status List Start Addr (low) */ + STAT_LIST_ADDR_HI= 0x0e8c,/* 32 bit Status List Start Addr (high) */ + STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ + STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ + STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ + STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ + STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ + STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ + +/* FIFO Control/Status Registers (Yukon-2 only)*/ + STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ + STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ + STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ + STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ + STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ + STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ + STAT_FIFO_ISR_WM= 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ + +/* Level and ISR Timer Registers (Yukon-2 only)*/ + STAT_LEV_TIMER_INI= 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ + STAT_LEV_TIMER_CNT= 0x0eb4,/* 32 bit Level Timer Counter Reg */ + STAT_LEV_TIMER_CTRL= 0x0eb8,/* 8 bit Level Timer Control Reg */ + STAT_LEV_TIMER_TEST= 0x0eb9,/* 8 bit Level Timer Test Reg */ + STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ + STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ + STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ + STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ + STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ + STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ + STAT_ISR_TIMER_CTRL= 0x0ed8,/* 8 bit ISR Timer Control Reg */ + STAT_ISR_TIMER_TEST= 0x0ed9,/* 8 bit ISR Timer Test Reg */ +}; + +enum { + LINKLED_OFF = 0x01, + LINKLED_ON = 0x02, + LINKLED_LINKSYNC_OFF = 0x04, + LINKLED_LINKSYNC_ON = 0x08, + LINKLED_BLINK_OFF = 0x10, + LINKLED_BLINK_ON = 0x20, +}; + +/* GMAC and GPHY Control Registers (YUKON only) */ +enum { + GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */ + GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */ + GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */ + GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */ + GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + + WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */ + + WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */ + WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ + WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ + WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ + WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ + WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ + WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ + +/* WOL Pattern Length Registers (YUKON only) */ + + WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */ + WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + + + WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */ + WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */ +}; + +enum { + WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */ + WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */ +}; + +enum { + BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */ + BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */ +}; + +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +enum { + PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ + PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */ + PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */ + PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */ + PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */ + PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */ + PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */ + PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */ + PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */ + PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */ + PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */ + PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */ + PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */ + PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */ + PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ + PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */ + PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */ + PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */ + PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */ + PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ +}; + +enum { + PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ + PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ + PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */ + PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */ + PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */ + PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */ + PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */ + PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */ + PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */ + PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */ +}; + +enum { + PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */ + PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */ + PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */ +}; + +enum { + PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */ + + PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ + PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ + PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ + PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ + PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */ +}; + +enum { + PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */ + PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */ + PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */ +}; + +/* different Marvell PHY Ids */ +enum { + PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */ + + PHY_BCOM_ID1_A1 = 0x6041, + PHY_BCOM_ID1_B2 = 0x6043, + PHY_BCOM_ID1_C0 = 0x6044, + PHY_BCOM_ID1_C5 = 0x6047, + + PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ + PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */ + PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ + PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ +}; + +/* Advertisement register bits */ +enum { + PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */ + + PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */ + PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */ + PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */ + PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */ + PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */ + PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */ + PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */ + PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */ + PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ + PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA, + PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL | + PHY_AN_100HALF | PHY_AN_100FULL, +}; + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ + PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/** Marvell-Specific */ +enum { + PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ + PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */ + PHY_M_AN_RF = 1<<13, /* Remote Fault */ + + PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */ + PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */ + PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */ + PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */ + PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */ + PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */ + PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */ + PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */ +}; + +/* special defines for FIBER (88E1011S only) */ +enum { + PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ + PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ + PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */ + PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */ +}; + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +enum { + PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */ + PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */ + PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */ + PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */ +}; + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */ + PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */ + PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */ + PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */ + PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */ +}; + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +enum { + PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */ + PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */ + PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */ + PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */ + PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */ + PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */ + PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */ + PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */ + PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */ + PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */ + PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */ + PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */ +}; + +enum { + PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */ + PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ +}; + +#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) + +enum { + PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ + PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */ + PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */ + PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */ + PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */ + PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */ + PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */ + + PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */ + PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */ + + PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */ + PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */ +}; + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +enum { + PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */ + PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */ + PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */ + PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */ + PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */ + PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */ + PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */ + PHY_M_PS_LINK_UP = 1<<10, /* Link Up */ + PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */ + PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */ + PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */ + PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */ + PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */ + PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */ + PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */ + PHY_M_PS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */ + PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ +}; + +enum { + PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */ + PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */ + PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */ + PHY_M_IS_AN_PR = 1<<12, /* Page Received */ + PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */ + PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */ + PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */ + PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */ + PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */ + PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */ + PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */ + PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */ + + PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */ + PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */ + PHY_M_IS_JABBER = 1<<0, /* Jabber */ + + PHY_M_DEF_MSK = PHY_M_IS_LSP_CHANGE | PHY_M_IS_LST_CHANGE + | PHY_M_IS_FIFO_ERROR, + PHY_M_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL, +}; + + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +enum { + PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */ + PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */ + + PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */ + PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */ + /* (88E1111 only) */ + PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ + /* !!! Errata in spec. (1 = disable) */ + PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ + PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */ + PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ + PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ + PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ + PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; + +#define PHY_M_EC_M_DSC(x) ((x)<<10 & PHY_M_EC_M_DSC_MSK) + /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) ((x)<<8 & PHY_M_EC_S_DSC_MSK) + /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_DSC_2(x) ((x)<<9 & PHY_M_EC_M_DSC_MSK2) + /* 000=1x; 001=2x; 010=3x; 011=4x */ +#define PHY_M_EC_MAC_S(x) ((x)<<4 & PHY_M_EC_MAC_S_MSK) + /* 01X=0; 110=2.5; 111=25 (MHz) */ + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +enum { + PHY_M_PC_DIS_LINK_Pa = 1<<15,/* Disable Link Pulses */ + PHY_M_PC_DSC_MSK = 7<<12,/* Bit 14..12: Downshift Counter */ + PHY_M_PC_DOWN_S_ENA = 1<<11,/* Downshift Enable */ +}; +/* !!! Errata in spec. (1 = disable) */ + +#define PHY_M_PC_DSC(x) (((x)<<12) & PHY_M_PC_DSC_MSK) + /* 100=5x; 101=6x; 110=7x; 111=8x */ +enum { + MAC_TX_CLK_0_MHZ = 2, + MAC_TX_CLK_2_5_MHZ = 6, + MAC_TX_CLK_25_MHZ = 7, +}; + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +enum { + PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */ + PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */ + PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */ + PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */ + PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */ + PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */ + PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */ + /* (88E1111 only) */ +}; + +enum { + PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */ + /* (88E1011 only) */ + PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */ + PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */ + PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */ + PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */ + PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ +}; + +#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) + +/***** PHY_MARV_PHY_STAT (page 3)16 bit r/w Polarity Control Reg. *****/ +enum { + PHY_M_POLC_LS1M_MSK = 0xf<<12, /* Bit 15..12: LOS,STAT1 Mix % Mask */ + PHY_M_POLC_IS0M_MSK = 0xf<<8, /* Bit 11.. 8: INIT,STAT0 Mix % Mask */ + PHY_M_POLC_LOS_MSK = 0x3<<6, /* Bit 7.. 6: LOS Pol. Ctrl. Mask */ + PHY_M_POLC_INIT_MSK = 0x3<<4, /* Bit 5.. 4: INIT Pol. Ctrl. Mask */ + PHY_M_POLC_STA1_MSK = 0x3<<2, /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */ + PHY_M_POLC_STA0_MSK = 0x3, /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */ +}; + +#define PHY_M_POLC_LS1_P_MIX(x) (((x)<<12) & PHY_M_POLC_LS1M_MSK) +#define PHY_M_POLC_IS0_P_MIX(x) (((x)<<8) & PHY_M_POLC_IS0M_MSK) +#define PHY_M_POLC_LOS_CTRL(x) (((x)<<6) & PHY_M_POLC_LOS_MSK) +#define PHY_M_POLC_INIT_CTRL(x) (((x)<<4) & PHY_M_POLC_INIT_MSK) +#define PHY_M_POLC_STA1_CTRL(x) (((x)<<2) & PHY_M_POLC_STA1_MSK) +#define PHY_M_POLC_STA0_CTRL(x) (((x)<<0) & PHY_M_POLC_STA0_MSK) + +enum { + PULS_NO_STR = 0,/* no pulse stretching */ + PULS_21MS = 1,/* 21 ms to 42 ms */ + PULS_42MS = 2,/* 42 ms to 84 ms */ + PULS_84MS = 3,/* 84 ms to 170 ms */ + PULS_170MS = 4,/* 170 ms to 340 ms */ + PULS_340MS = 5,/* 340 ms to 670 ms */ + PULS_670MS = 6,/* 670 ms to 1.3 s */ + PULS_1300MS = 7,/* 1.3 s to 2.7 s */ +}; + +#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) + +enum { + BLINK_42MS = 0,/* 42 ms */ + BLINK_84MS = 1,/* 84 ms */ + BLINK_170MS = 2,/* 170 ms */ + BLINK_340MS = 3,/* 340 ms */ + BLINK_670MS = 4,/* 670 ms */ +}; + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + /* Bit 13..12: reserved */ +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, +}; + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ +enum { + PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */ + PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */ + PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */ + PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */ + PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */ +}; + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +enum { + PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */ + PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */ + PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */ + PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */ + PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */ + PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */ + PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */ + /* (88E1111 only) */ + + PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */ + PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */ + PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ + /* Bit 15..12: reserved (used internally) */ +enum { + PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */ + PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */ + PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ +}; + +#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK) + +enum { + LED_PAR_CTRL_COLX = 0x00, + LED_PAR_CTRL_ERROR = 0x01, + LED_PAR_CTRL_DUPLEX = 0x02, + LED_PAR_CTRL_DP_COL = 0x03, + LED_PAR_CTRL_SPEED = 0x04, + LED_PAR_CTRL_LINK = 0x05, + LED_PAR_CTRL_TX = 0x06, + LED_PAR_CTRL_RX = 0x07, + LED_PAR_CTRL_ACT = 0x08, + LED_PAR_CTRL_LNK_RX = 0x09, + LED_PAR_CTRL_LNK_AC = 0x0a, + LED_PAR_CTRL_ACT_BL = 0x0b, + LED_PAR_CTRL_TX_BL = 0x0c, + LED_PAR_CTRL_RX_BL = 0x0d, + LED_PAR_CTRL_COL_BL = 0x0e, + LED_PAR_CTRL_INACT = 0x0f +}; + +/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ +enum { + PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */ + PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */ + PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ +}; + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ +enum { + PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ + PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ + PHY_M_MAC_MD_COPPER = 5,/* Copper only */ + PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ +}; +#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) + +/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ +enum { + PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */ + PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */ + PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */ + PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ +}; + +#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK) + +/* GMAC registers */ +/* Port Registers */ +enum { + GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */ + GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */ + GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */ + GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */ + GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */ + GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */ + GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */ +/* Source Address Registers */ + GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */ + GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */ + GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */ + GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */ + GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */ + GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ + GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */ + GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */ + GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */ + GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ + GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */ + GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */ + GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ + GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */ + GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */ + GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ + GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */ + GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */ + GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */ +}; + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +enum { + GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */ + GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */ + GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */ + GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */ + GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ + GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */ + GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */ + GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */ + GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */ + GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */ + GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */ + GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */ + GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */ + GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */ + GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */ + GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */ + GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */ + GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */ + GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */ + GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ + GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ + GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */ + GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */ + GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */ + GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */ + GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */ + GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */ + GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */ + GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */ + GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */ + GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */ + GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */ + GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */ + GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */ + + GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */ + GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */ + GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */ + GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */ + GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */ + GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */ +}; + +/* GMAC Bit Definitions */ +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +enum { + GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */ + GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */ + GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */ + GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ + GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ + GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + + GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ + GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ + GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */ + GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */ + GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */ +}; + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ +enum { + GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */ + GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */ + GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */ + GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */ + GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */ + GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */ + GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */ + GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */ + GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */ + GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */ + GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */ + GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */ + GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */ + GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */ + GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */ +}; + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +enum { + GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ + GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ + GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ + GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ +}; + +#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +enum { + GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */ + GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */ + GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */ + GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */ +}; + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +enum { + GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */ + GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */ + GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */ + GM_TXPA_BO_LIM_MSK = 0x0f, /* Bit 3.. 0: Backoff Limit Mask */ + + TX_JAM_LEN_DEF = 0x03, + TX_JAM_IPG_DEF = 0x0b, + TX_IPG_JAM_DEF = 0x1c, + TX_BOF_LIM_DEF = 0x04, +}; + +#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK) +#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK) + + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +enum { + GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */ + GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */ + GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */ + GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */ + GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ +}; + +#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +enum { + GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */ + GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */ + GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/ + GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ + GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ +}; + +#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ +enum { + GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */ + GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */ +}; + +/* Receive Frame Status Encoding */ +enum { + GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_VLAN = 1<<13, /* VLAN Packet */ + GMR_FS_JABBER = 1<<12, /* Jabber Packet */ + GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */ + GMR_FS_MC = 1<<10, /* Multicast Packet */ + GMR_FS_BC = 1<<9, /* Broadcast Packet */ + GMR_FS_RX_OK = 1<<8, /* Receive OK (Good Packet) */ + GMR_FS_GOOD_FC = 1<<7, /* Good Flow-Control Packet */ + GMR_FS_BAD_FC = 1<<6, /* Bad Flow-Control Packet */ + GMR_FS_MII_ERR = 1<<5, /* MII Error */ + GMR_FS_LONG_ERR = 1<<4, /* Too Long Packet */ + GMR_FS_FRAGMENT = 1<<3, /* Fragment */ + + GMR_FS_CRC_ERR = 1<<1, /* CRC Error */ + GMR_FS_RX_FF_OV = 1<<0, /* Rx FIFO Overflow */ + + GMR_FS_ANY_ERR = GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR | + GMR_FS_FRAGMENT | GMR_FS_LONG_ERR | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_UN_SIZE | GMR_FS_JABBER, +}; + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ +enum { + RX_TRUNC_ON = 1<<27, /* enable packet truncation */ + RX_TRUNC_OFF = 1<<26, /* disable packet truncation */ + RX_VLAN_STRIP_ON = 1<<25, /* enable VLAN stripping */ + RX_VLAN_STRIP_OFF = 1<<24, /* disable VLAN stripping */ + + GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */ + GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */ + GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */ + + GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */ + GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */ + GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */ + GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */ + GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */ + GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */ + GMF_CLI_RX_C = 1<<4, /* Clear IRQ Rx Frame Complete */ + + GMF_OPER_ON = 1<<3, /* Operational Mode On */ + GMF_OPER_OFF = 1<<2, /* Operational Mode Off */ + GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */ + GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */ + + RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */ + + GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON, +}; + + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ +enum { + TX_STFW_DIS = 1<<31,/* Disable Store & Forward (Yukon-EC Ultra) */ + TX_STFW_ENA = 1<<30,/* Enable Store & Forward (Yukon-EC Ultra) */ + + TX_VLAN_TAG_ON = 1<<25,/* enable VLAN tagging */ + TX_VLAN_TAG_OFF = 1<<24,/* disable VLAN tagging */ + + GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ + GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ + GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ + + GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */ + GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */ + GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */ +}; + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ +enum { + GMT_ST_START = 1<<2, /* Start Time Stamp Timer */ + GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */ + GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */ +}; + +/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ +enum { + Y2_ASF_OS_PRES = 1<<4, /* ASF operation system present */ + Y2_ASF_RESET = 1<<3, /* ASF system in reset state */ + Y2_ASF_RUNNING = 1<<2, /* ASF system operational */ + Y2_ASF_CLR_HSTI = 1<<1, /* Clear ASF IRQ */ + Y2_ASF_IRQ = 1<<0, /* Issue an IRQ to ASF system */ + + Y2_ASF_UC_STATE = 3<<2, /* ASF uC State */ + Y2_ASF_CLK_HALT = 0, /* ASF system clock stopped */ +}; + +/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ +enum { + Y2_ASF_CLR_ASFI = 1<<1, /* Clear host IRQ */ + Y2_ASF_HOST_IRQ = 1<<0, /* Issue an IRQ to HOST system */ +}; + +/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ +enum { + SC_STAT_CLR_IRQ = 1<<4, /* Status Burst IRQ clear */ + SC_STAT_OP_ON = 1<<3, /* Operational Mode On */ + SC_STAT_OP_OFF = 1<<2, /* Operational Mode Off */ + SC_STAT_RST_CLR = 1<<1, /* Clear Status Unit Reset (Enable) */ + SC_STAT_RST_SET = 1<<0, /* Set Status Unit Reset */ +}; + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ +enum { + GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */ + GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */ + GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */ + GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */ + GMC_PAUSE_ON = 1<<3, /* Pause On */ + GMC_PAUSE_OFF = 1<<2, /* Pause Off */ + GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */ + GMC_RST_SET = 1<<0, /* Set GMAC Reset */ +}; + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ +enum { + GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ + GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ + GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ + GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ + GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ + GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ + GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ + GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ + GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ + GPC_ANEG_0 = 1<<19, /* ANEG[0] */ + GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ + GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ + GPC_ANEG_3 = 1<<16, /* ANEG[3] */ + GPC_ANEG_2 = 1<<15, /* ANEG[2] */ + GPC_ANEG_1 = 1<<14, /* ANEG[1] */ + GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ + GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ + GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ + GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ + GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ + GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ + GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ + GPC_RST_SET = 1<<0, /* Set GPHY Reset */ +}; + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +enum { + GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */ + GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */ + GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */ + GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */ + GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ + GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ + +#define GMAC_DEF_MSK GM_IS_TX_FF_UR + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ + GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */ + GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ + WOL_CTL_LINK_CHG_OCC = 1<<15, + WOL_CTL_MAGIC_PKT_OCC = 1<<14, + WOL_CTL_PATTERN_OCC = 1<<13, + WOL_CTL_CLEAR_RESULT = 1<<12, + WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11, + WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10, + WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9, + WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8, + WOL_CTL_ENA_PME_ON_PATTERN = 1<<7, + WOL_CTL_DIS_PME_ON_PATTERN = 1<<6, + WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5, + WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4, + WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3, + WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2, + WOL_CTL_ENA_PATTERN_UNIT = 1<<1, + WOL_CTL_DIS_PATTERN_UNIT = 1<<0, +}; + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (1 << (x)) + + +/* Control flags */ +enum { + UDPTCP = 1<<0, + CALSUM = 1<<1, + WR_SUM = 1<<2, + INIT_SUM= 1<<3, + LOCK_SUM= 1<<4, + INS_VLAN= 1<<5, + FRC_STAT= 1<<6, + EOP = 1<<7, +}; + +enum { + HW_OWNER = 1<<7, + OP_TCPWRITE = 0x11, + OP_TCPSTART = 0x12, + OP_TCPINIT = 0x14, + OP_TCPLCK = 0x18, + OP_TCPCHKSUM = OP_TCPSTART, + OP_TCPIS = OP_TCPINIT | OP_TCPSTART, + OP_TCPLW = OP_TCPLCK | OP_TCPWRITE, + OP_TCPLSW = OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE, + OP_TCPLISW = OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE, + + OP_ADDR64 = 0x21, + OP_VLAN = 0x22, + OP_ADDR64VLAN = OP_ADDR64 | OP_VLAN, + OP_LRGLEN = 0x24, + OP_LRGLENVLAN = OP_LRGLEN | OP_VLAN, + OP_BUFFER = 0x40, + OP_PACKET = 0x41, + OP_LARGESEND = 0x43, + +/* YUKON-2 STATUS opcodes defines */ + OP_RXSTAT = 0x60, + OP_RXTIMESTAMP = 0x61, + OP_RXVLAN = 0x62, + OP_RXCHKS = 0x64, + OP_RXCHKSVLAN = OP_RXCHKS | OP_RXVLAN, + OP_RXTIMEVLAN = OP_RXTIMESTAMP | OP_RXVLAN, + OP_RSS_HASH = 0x65, + OP_TXINDEXLE = 0x68, +}; + +/* Yukon 2 hardware interface + * Not tested on big endian + */ +struct sky2_tx_le { + union { + __le32 addr; + struct { + __le16 offset; + __le16 start; + } csum __attribute((packed)); + struct { + __le16 size; + __le16 rsvd; + } tso __attribute((packed)); + } tx; + __le16 length; /* also vlan tag or checksum start */ + u8 ctrl; + u8 opcode; +} __attribute((packed)); + +struct sky2_rx_le { + __le32 addr; + __le16 length; + u8 ctrl; + u8 opcode; +} __attribute((packed));; + +struct sky2_status_le { + __le32 status; /* also checksum */ + __le16 length; /* also vlan tag */ + u8 link; + u8 opcode; +} __attribute((packed)); + +struct tx_ring_info { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + u16 idx; +}; + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapaddr; +}; + +struct sky2_port { + struct sky2_hw *hw; + struct net_device *netdev; + unsigned port; + u32 msg_enable; + + spinlock_t tx_lock ____cacheline_aligned_in_smp; + struct tx_ring_info *tx_ring; + struct sky2_tx_le *tx_le; + u16 tx_cons; /* next le to check */ + u16 tx_prod; /* next le to use */ + u32 tx_addr64; + u16 tx_pending; + u16 tx_last_put; + u16 tx_last_mss; + + struct ring_info *rx_ring ____cacheline_aligned_in_smp; + struct sky2_rx_le *rx_le; + u32 rx_addr64; + u16 rx_next; /* next re to check */ + u16 rx_put; /* next le index to use */ + u16 rx_pending; + u16 rx_last_put; + u16 rx_bufsize; +#ifdef SKY2_VLAN_TAG_USED + u16 rx_tag; + struct vlan_group *vlgrp; +#endif + + dma_addr_t rx_le_map; + dma_addr_t tx_le_map; + u32 advertising; /* ADVERTISED_ bits */ + u16 speed; /* SPEED_1000, SPEED_100, ... */ + u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */ + u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */ + u8 rx_pause; + u8 tx_pause; + u8 rx_csum; + u8 wol; + + struct net_device_stats net_stats; + + struct work_struct phy_task; + struct semaphore phy_sema; +}; + +struct sky2_hw { + void __iomem *regs; + struct pci_dev *pdev; + u32 intr_mask; + struct net_device *dev[2]; + + int pm_cap; + u8 chip_id; + u8 chip_rev; + u8 copper; + u8 ports; + + struct sky2_status_le *st_le; + u32 st_idx; + dma_addr_t st_dma; +}; + +/* Register accessor for memory mapped device */ +static inline u32 sky2_read32(const struct sky2_hw *hw, unsigned reg) +{ + return readl(hw->regs + reg); +} + +static inline u16 sky2_read16(const struct sky2_hw *hw, unsigned reg) +{ + return readw(hw->regs + reg); +} + +static inline u8 sky2_read8(const struct sky2_hw *hw, unsigned reg) +{ + return readb(hw->regs + reg); +} + +/* This should probably go away, bus based tweeks suck */ +static inline int is_pciex(const struct sky2_hw *hw) +{ + u32 status; + pci_read_config_dword(hw->pdev, PCI_DEV_STATUS, &status); + return (status & PCI_OS_PCI_X) == 0; +} + +static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val) +{ + writel(val, hw->regs + reg); +} + +static inline void sky2_write16(const struct sky2_hw *hw, unsigned reg, u16 val) +{ + writew(val, hw->regs + reg); +} + +static inline void sky2_write8(const struct sky2_hw *hw, unsigned reg, u8 val) +{ + writeb(val, hw->regs + reg); +} + +/* Yukon PHY related registers */ +#define SK_GMAC_REG(port,reg) \ + (BASE_GMAC_1 + (port) * (BASE_GMAC_2-BASE_GMAC_1) + (reg)) +#define GM_PHY_RETRIES 100 + +static inline u16 gma_read16(const struct sky2_hw *hw, unsigned port, unsigned reg) +{ + return sky2_read16(hw, SK_GMAC_REG(port,reg)); +} + +static inline u32 gma_read32(struct sky2_hw *hw, unsigned port, unsigned reg) +{ + unsigned base = SK_GMAC_REG(port, reg); + return (u32) sky2_read16(hw, base) + | (u32) sky2_read16(hw, base+4) << 16; +} + +static inline void gma_write16(const struct sky2_hw *hw, unsigned port, int r, u16 v) +{ + sky2_write16(hw, SK_GMAC_REG(port,r), v); +} + +static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, + const u8 *addr) +{ + gma_write16(hw, port, reg, (u16) addr[0] | ((u16) addr[1] << 8)); + gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); + gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); +} +#endif diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2fc9893d69e1..eb86b059809b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -24,6 +24,7 @@ #include <linux/compiler.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/in.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/pci.h> @@ -3650,7 +3651,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) TXD_FLAG_CPU_POST_DMA); skb->nh.iph->check = 0; - skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len); + skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len); if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { skb->h.th->check = 0; base_flags &= ~TXD_FLAG_TCPUDP_CSUM; diff --git a/drivers/net/wan/lmc/lmc_prot.h b/drivers/net/wan/lmc/lmc_prot.h deleted file mode 100644 index f3b1df9e2cdb..000000000000 --- a/drivers/net/wan/lmc/lmc_prot.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _LMC_PROTO_H_ -#define _LMC_PROTO_H_ - -void lmc_proto_init(lmc_softc_t * const) -void lmc_proto_attach(lmc_softc_t *sc const) -void lmc_proto_detach(lmc_softc *sc const) -void lmc_proto_reopen(lmc_softc_t *sc const) -int lmc_proto_ioctl(lmc_softc_t *sc const, struct ifreq *ifr, int cmd) -void lmc_proto_open(lmc_softc_t *sc const) -void lmc_proto_close(lmc_softc_t *sc const) -unsigned short lmc_proto_type(lmc_softc_t *sc const, struct skbuff *skb) - - -#endif - diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 00e55165b760..24f7967aab67 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -173,7 +173,7 @@ config IPW2100_MONITOR promiscuous mode via the Wireless Tool's Monitor mode. While in this mode, no packets can be sent. -config IPW_DEBUG +config IPW2100_DEBUG bool "Enable full debugging output in IPW2100 module." depends on IPW2100 ---help--- @@ -192,7 +192,7 @@ config IPW_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on IEEE80211 && PCI + depends on NET_RADIO && IEEE80211 && PCI select FW_LOADER ---help--- A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network @@ -217,7 +217,7 @@ config IPW2200 say M here and read <file:Documentation/modules.txt>. The module will be called ipw2200.ko. -config IPW_DEBUG +config IPW2200_DEBUG bool "Enable full debugging output in IPW2200 module." depends on IPW2200 ---help--- diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 7a92b1cbd6aa..ee866fd6957d 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4037,7 +4037,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, Cmd cmd; Resp rsp; - if (test_bit(FLAG_ENABLED, &ai->flags)) + if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid)) printk(KERN_ERR "%s: MAC should be disabled (rid=%04x)\n", __FUNCTION__, rid); @@ -5093,9 +5093,9 @@ static int set_wep_key(struct airo_info *ai, u16 index, printk(KERN_INFO "Setting key %d\n", index); } - disable_MAC(ai, lock); + if (perm) disable_MAC(ai, lock); writeWepKeyRid(ai, &wkr, perm, lock); - enable_MAC(ai, &rsp, lock); + if (perm) enable_MAC(ai, &rsp, lock); return 0; } @@ -6170,6 +6170,8 @@ static int airo_set_encode(struct net_device *dev, { struct airo_info *local = dev->priv; CapabilityRid cap_rid; /* Card capability info */ + int perm = ( dwrq->flags & IW_ENCODE_TEMP ? 0 : 1 ); + u16 currentAuthType = local->config.authType; /* Is WEP supported ? */ readCapabilityRid(local, &cap_rid, 1); @@ -6212,7 +6214,7 @@ static int airo_set_encode(struct net_device *dev, /* Copy the key in the driver */ memcpy(key.key, extra, dwrq->length); /* Send the key to the card */ - set_wep_key(local, index, key.key, key.len, 1, 1); + set_wep_key(local, index, key.key, key.len, perm, 1); } /* WE specify that if a valid key is set, encryption * should be enabled (user may turn it off later) @@ -6220,13 +6222,12 @@ static int airo_set_encode(struct net_device *dev, if((index == current_index) && (key.len > 0) && (local->config.authType == AUTH_OPEN)) { local->config.authType = AUTH_ENCRYPT; - set_bit (FLAG_COMMIT, &local->flags); } } else { /* Do we want to just set the transmit key index ? */ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) { - set_wep_key(local, index, NULL, 0, 1, 1); + set_wep_key(local, index, NULL, 0, perm, 1); } else /* Don't complain if only change the mode */ if(!dwrq->flags & IW_ENCODE_MODE) { @@ -6241,7 +6242,7 @@ static int airo_set_encode(struct net_device *dev, if(dwrq->flags & IW_ENCODE_OPEN) local->config.authType = AUTH_ENCRYPT; // Only Wep /* Commit the changes to flags if needed */ - if(dwrq->flags & IW_ENCODE_MODE) + if (local->config.authType != currentAuthType) set_bit (FLAG_COMMIT, &local->flags); return -EINPROGRESS; /* Call commit handler */ } diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 5e53c5258a33..e4729ddf29fd 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -5,9 +5,9 @@ Copyright 2000-2001 ATMEL Corporation. Copyright 2003-2004 Simon Kelley. - This code was developed from version 2.1.1 of the Atmel drivers, - released by Atmel corp. under the GPL in December 2002. It also - includes code from the Linux aironet drivers (C) Benjamin Reed, + This code was developed from version 2.1.1 of the Atmel drivers, + released by Atmel corp. under the GPL in December 2002. It also + includes code from the Linux aironet drivers (C) Benjamin Reed, and the Linux PCMCIA package, (C) David Hinds and the Linux wireless extensions, (C) Jean Tourrilhes. @@ -31,7 +31,7 @@ along with Atmel wireless lan drivers; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - For all queries about this code, please contact the current author, + For all queries about this code, please contact the current author, Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation. Credit is due to HP UK and Cambridge Online Systems Ltd for supplying @@ -79,13 +79,13 @@ MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.") MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards"); -/* The name of the firmware file to be loaded +/* The name of the firmware file to be loaded over-rides any automatic selection */ static char *firmware = NULL; module_param(firmware, charp, 0); /* table of firmware file names */ -static struct { +static struct { AtmelFWType fw_type; const char *fw_file; const char *fw_file_ext; @@ -104,17 +104,17 @@ static struct { #define MAX_SSID_LENGTH 32 #define MGMT_JIFFIES (256 * HZ / 100) -#define MAX_BSS_ENTRIES 64 +#define MAX_BSS_ENTRIES 64 /* registers */ -#define GCR 0x00 // (SIR0) General Configuration Register -#define BSR 0x02 // (SIR1) Bank Switching Select Register +#define GCR 0x00 // (SIR0) General Configuration Register +#define BSR 0x02 // (SIR1) Bank Switching Select Register #define AR 0x04 #define DR 0x08 -#define MR1 0x12 // Mirror Register 1 -#define MR2 0x14 // Mirror Register 2 -#define MR3 0x16 // Mirror Register 3 -#define MR4 0x18 // Mirror Register 4 +#define MR1 0x12 // Mirror Register 1 +#define MR2 0x14 // Mirror Register 2 +#define MR3 0x16 // Mirror Register 3 +#define MR4 0x18 // Mirror Register 4 #define GPR1 0x0c #define GPR2 0x0e @@ -123,9 +123,9 @@ static struct { // Constants for the GCR register. // #define GCR_REMAP 0x0400 // Remap internal SRAM to 0 -#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset) +#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset) #define GCR_CORES 0x0060 // Core Reset (ARM and PAI are reset) -#define GCR_ENINT 0x0002 // Enable Interrupts +#define GCR_ENINT 0x0002 // Enable Interrupts #define GCR_ACKINT 0x0008 // Acknowledge Interrupts #define BSS_SRAM 0x0200 // AMBA module selection --> SRAM @@ -190,7 +190,7 @@ struct rx_desc { u32 Next; u16 MsduPos; u16 MsduSize; - + u8 State; u8 Status; u8 Rate; @@ -199,7 +199,6 @@ struct rx_desc { u8 PreambleType; u16 Duration; u32 RxTime; - }; #define RX_DESC_FLAG_VALID 0x80 @@ -218,16 +217,15 @@ struct rx_desc { #define RX_DESC_DURATION_OFFSET 14 #define RX_DESC_RX_TIME_OFFSET 16 - struct tx_desc { u32 NextDescriptor; u16 TxStartOfFrame; u16 TxLength; - + u8 TxState; u8 TxStatus; u8 RetryCount; - + u8 TxRate; u8 KeyIndex; @@ -238,10 +236,8 @@ struct tx_desc { u8 Reserved; u8 PacketType; u16 HostTxLength; - }; - #define TX_DESC_NEXT_OFFSET 0 #define TX_DESC_POS_OFFSET 4 #define TX_DESC_SIZE_OFFSET 6 @@ -255,8 +251,6 @@ struct tx_desc { #define TX_DESC_PACKET_TYPE_OFFSET 17 #define TX_DESC_HOST_LENGTH_OFFSET 18 - - /////////////////////////////////////////////////////// // Host-MAC interface /////////////////////////////////////////////////////// @@ -266,7 +260,6 @@ struct tx_desc { #define TX_FIRM_OWN 0x80 #define TX_DONE 0x40 - #define TX_ERROR 0x01 #define TX_PACKET_TYPE_DATA 0x01 @@ -280,8 +273,7 @@ struct tx_desc { #define ISR_COMMAND_COMPLETE 0x10 // command completed #define ISR_OUT_OF_RANGE 0x20 // command completed #define ISR_IBSS_MERGE 0x40 // (4.1.2.30): IBSS merge -#define ISR_GENERIC_IRQ 0x80 - +#define ISR_GENERIC_IRQ 0x80 #define Local_Mib_Type 0x01 #define Mac_Address_Mib_Type 0x02 @@ -317,7 +309,6 @@ struct tx_desc { #define LOCAL_MIB_PREAMBLE_TYPE 9 #define MAC_ADDR_MIB_MAC_ADDR_POS 0 - #define CMD_Set_MIB_Vars 0x01 #define CMD_Get_MIB_Vars 0x02 #define CMD_Scan 0x03 @@ -338,7 +329,6 @@ struct tx_desc { #define CMD_STATUS_HOST_ERROR 0xFF #define CMD_STATUS_BUSY 0xFE - #define CMD_BLOCK_COMMAND_OFFSET 0 #define CMD_BLOCK_STATUS_OFFSET 1 #define CMD_BLOCK_PARAMETERS_OFFSET 4 @@ -347,15 +337,15 @@ struct tx_desc { #define MGMT_FRAME_BODY_OFFSET 24 #define MAX_AUTHENTICATION_RETRIES 3 -#define MAX_ASSOCIATION_RETRIES 3 +#define MAX_ASSOCIATION_RETRIES 3 #define AUTHENTICATION_RESPONSE_TIME_OUT 1000 #define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */ #define LOOP_RETRY_LIMIT 500000 -#define ACTIVE_MODE 1 -#define PS_MODE 2 +#define ACTIVE_MODE 1 +#define PS_MODE 2 #define MAX_ENCRYPTION_KEYS 4 #define MAX_ENCRYPTION_KEY_SIZE 40 @@ -377,7 +367,7 @@ struct tx_desc { #define REG_DOMAIN_MKK1 0x41 //Channel 1-14 Japan(MKK1) #define REG_DOMAIN_ISRAEL 0x50 //Channel 3-9 ISRAEL -#define BSS_TYPE_AD_HOC 1 +#define BSS_TYPE_AD_HOC 1 #define BSS_TYPE_INFRASTRUCTURE 2 #define SCAN_TYPE_ACTIVE 0 @@ -389,7 +379,7 @@ struct tx_desc { #define DATA_FRAME_WS_HEADER_SIZE 30 -/* promiscuous mode control */ +/* promiscuous mode control */ #define PROM_MODE_OFF 0x0 #define PROM_MODE_UNKNOWN 0x1 #define PROM_MODE_CRC_FAILED 0x2 @@ -398,8 +388,7 @@ struct tx_desc { #define PROM_MODE_CTRL 0x10 #define PROM_MODE_BAD_PROTOCOL 0x20 - -#define IFACE_INT_STATUS_OFFSET 0 +#define IFACE_INT_STATUS_OFFSET 0 #define IFACE_INT_MASK_OFFSET 1 #define IFACE_LOCKOUT_HOST_OFFSET 2 #define IFACE_LOCKOUT_MAC_OFFSET 3 @@ -407,7 +396,7 @@ struct tx_desc { #define IFACE_MAC_STAT_OFFSET 30 #define IFACE_GENERIC_INT_TYPE_OFFSET 32 -#define CIPHER_SUITE_NONE 0 +#define CIPHER_SUITE_NONE 0 #define CIPHER_SUITE_WEP_64 1 #define CIPHER_SUITE_TKIP 2 #define CIPHER_SUITE_AES 3 @@ -419,11 +408,11 @@ struct tx_desc { // // -// FuncCtrl field: +// FuncCtrl field: // #define FUNC_CTRL_TxENABLE 0x10 #define FUNC_CTRL_RxENABLE 0x20 -#define FUNC_CTRL_INIT_COMPLETE 0x01 +#define FUNC_CTRL_INIT_COMPLETE 0x01 /* A stub firmware image which reads the MAC address from NVRAM on the card. For copyright information and source see the end of this file. */ @@ -486,10 +475,10 @@ struct atmel_private { struct net_device_stats stats; // device stats spinlock_t irqlock, timerlock; // spinlocks enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type; - enum { - CARD_TYPE_PARALLEL_FLASH, + enum { + CARD_TYPE_PARALLEL_FLASH, CARD_TYPE_SPI_FLASH, - CARD_TYPE_EEPROM + CARD_TYPE_EEPROM } card_type; int do_rx_crc; /* If we need to CRC incoming packets */ int probe_crc; /* set if we don't yet know */ @@ -497,18 +486,18 @@ struct atmel_private { u16 rx_desc_head; u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous; u16 tx_free_mem, tx_buff_head, tx_buff_tail; - + u16 frag_seq, frag_len, frag_no; - u8 frag_source[6]; - + u8 frag_source[6]; + u8 wep_is_on, default_key, exclude_unencrypted, encryption_level; u8 group_cipher_suite, pairwise_cipher_suite; u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; - int wep_key_len[MAX_ENCRYPTION_KEYS]; + int wep_key_len[MAX_ENCRYPTION_KEYS]; int use_wpa, radio_on_broken; /* firmware dependent stuff. */ u16 host_info_base; - struct host_info_struct { + struct host_info_struct { /* NB this is matched to the hardware, don't change. */ u8 volatile int_status; u8 volatile int_mask; @@ -524,20 +513,20 @@ struct atmel_private { u16 rx_buff_size; u16 rx_desc_pos; u16 rx_desc_count; - + u16 build_version; - u16 command_pos; - + u16 command_pos; + u16 major_version; u16 minor_version; - + u16 func_ctrl; u16 mac_status; u16 generic_IRQ_type; u8 reserved[2]; } host_info; - enum { + enum { STATION_STATE_SCANNING, STATION_STATE_JOINNING, STATION_STATE_AUTHENTICATING, @@ -547,7 +536,7 @@ struct atmel_private { STATION_STATE_DOWN, STATION_STATE_MGMT_ERROR } station_state; - + int operating_mode, power_mode; time_t last_qual; int beacons_this_sec; @@ -560,18 +549,18 @@ struct atmel_private { int long_retry, short_retry; int preamble; int default_beacon_period, beacon_period, listen_interval; - int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum; + int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum; int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt; enum { SITE_SURVEY_IDLE, SITE_SURVEY_IN_PROGRESS, - SITE_SURVEY_COMPLETED + SITE_SURVEY_COMPLETED } site_survey_state; time_t last_survey; int station_was_associated, station_is_associated; int fast_scan; - + struct bss_info { int channel; int SSIDsize; @@ -584,13 +573,12 @@ struct atmel_private { u8 SSID[MAX_SSID_LENGTH]; } BSSinfo[MAX_BSS_ENTRIES]; int BSS_list_entries, current_BSS; - int connect_to_any_BSS; + int connect_to_any_BSS; int SSID_size, new_SSID_size; u8 CurrentBSSID[6], BSSID[6]; u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH]; u64 last_beacon_timestamp; u8 rx_buf[MAX_WIRELESS_BODY]; - }; static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16}; @@ -598,39 +586,49 @@ static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16}; static const struct { int reg_domain; int min, max; - char *name; + char *name; } channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" }, { REG_DOMAIN_DOC, 1, 11, "Canada" }, { REG_DOMAIN_ETSI, 1, 13, "Europe" }, { REG_DOMAIN_SPAIN, 10, 11, "Spain" }, - { REG_DOMAIN_FRANCE, 10, 13, "France" }, + { REG_DOMAIN_FRANCE, 10, 13, "France" }, { REG_DOMAIN_MKK, 14, 14, "MKK" }, { REG_DOMAIN_MKK1, 1, 14, "MKK1" }, { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} }; static void build_wpa_mib(struct atmel_private *priv); static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len); -static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len); +static void atmel_copy_to_card(struct net_device *dev, u16 dest, + unsigned char *src, u16 len); +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, + u16 src, u16 len); static void atmel_set_gcr(struct net_device *dev, u16 mask); static void atmel_clear_gcr(struct net_device *dev, u16 mask); static int atmel_lock_mac(struct atmel_private *priv); static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); static void atmel_command_irq(struct atmel_private *priv); static int atmel_validate_channel(struct atmel_private *priv, int channel); -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, +static void atmel_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi); static void atmel_management_timer(u_long a); -static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, +static void atmel_send_command(struct atmel_private *priv, int command, + void *cmd, int cmd_size); +static int atmel_send_command_wait(struct atmel_private *priv, int command, + void *cmd, int cmd_size); +static void atmel_transmit_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u8 *body, int body_len); static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); -static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data); -static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data); -static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); -static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); +static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, + u8 data); +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, + u16 data); +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len); +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len); static void atmel_scan(struct atmel_private *priv, int specific_ssid); static void atmel_join_bss(struct atmel_private *priv, int bss_index); static void atmel_smooth_qual(struct atmel_private *priv); @@ -650,12 +648,12 @@ static inline u16 atmel_co(struct atmel_private *priv, u16 offset) return priv->host_info.command_pos + offset; } -static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc) +static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc) { return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset; } -static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc) +static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc) { return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset; } @@ -682,25 +680,25 @@ static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data) static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); return atmel_read8(priv->dev, DR); } static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write8(priv->dev, DR, data); } static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); return atmel_read16(priv->dev, DR); } static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write16(priv->dev, DR, data); } @@ -710,11 +708,10 @@ static void tx_done_irq(struct atmel_private *priv) { int i; - for (i = 0; + for (i = 0; atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE && i < priv->host_info.tx_desc_count; i++) { - u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head)); u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head)); u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head)); @@ -728,16 +725,16 @@ static void tx_done_irq(struct atmel_private *priv) priv->tx_buff_head = 0; else priv->tx_buff_head += msdu_size; - + if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1)) - priv->tx_desc_head++ ; + priv->tx_desc_head++ ; else priv->tx_desc_head = 0; - + if (type == TX_PACKET_TYPE_DATA) { if (status == TX_STATUS_SUCCESS) priv->stats.tx_packets++; - else + else priv->stats.tx_errors++; netif_wake_queue(priv->dev); } @@ -748,21 +745,22 @@ static u16 find_tx_buff(struct atmel_private *priv, u16 len) { u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail; - if (priv->tx_desc_free == 3 || priv->tx_free_mem < len) + if (priv->tx_desc_free == 3 || priv->tx_free_mem < len) return 0; - + if (bottom_free >= len) return priv->host_info.tx_buff_pos + priv->tx_buff_tail; - + if (priv->tx_free_mem - bottom_free >= len) { priv->tx_buff_tail = 0; return priv->host_info.tx_buff_pos; } - + return 0; } -static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 len, u16 buff, u8 type) +static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, + u16 len, u16 buff, u8 type) { atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len); @@ -775,8 +773,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l int cipher_type, cipher_length; if (is_bcast) { cipher_type = priv->group_cipher_suite; - if (cipher_type == CIPHER_SUITE_WEP_64 || - cipher_type == CIPHER_SUITE_WEP_128 ) + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128) cipher_length = 8; else if (cipher_type == CIPHER_SUITE_TKIP) cipher_length = 12; @@ -790,8 +788,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l } } else { cipher_type = priv->pairwise_cipher_suite; - if (cipher_type == CIPHER_SUITE_WEP_64 || - cipher_type == CIPHER_SUITE_WEP_128 ) + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128) cipher_length = 8; else if (cipher_type == CIPHER_SUITE_TKIP) cipher_length = 12; @@ -804,9 +802,9 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l cipher_length = 0; } } - + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail), - cipher_type); + cipher_type); atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail), cipher_length); } @@ -815,46 +813,46 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l if (priv->tx_desc_previous != priv->tx_desc_tail) atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0); priv->tx_desc_previous = priv->tx_desc_tail; - if (priv->tx_desc_tail < (priv->host_info.tx_desc_count -1 )) + if (priv->tx_desc_tail < (priv->host_info.tx_desc_count - 1)) priv->tx_desc_tail++; else priv->tx_desc_tail = 0; priv->tx_desc_free--; priv->tx_free_mem -= len; - } -static int start_tx (struct sk_buff *skb, struct net_device *dev) +static int start_tx(struct sk_buff *skb, struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); struct ieee80211_hdr_4addr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; - - if (priv->card && priv->present_callback && + + if (priv->card && priv->present_callback && !(*priv->present_callback)(priv->card)) { priv->stats.tx_errors++; dev_kfree_skb(skb); return 0; } - + if (priv->station_state != STATION_STATE_READY) { priv->stats.tx_errors++; dev_kfree_skb(skb); return 0; } - + /* first ensure the timer func cannot run */ - spin_lock_bh(&priv->timerlock); + spin_lock_bh(&priv->timerlock); /* then stop the hardware ISR */ - spin_lock_irqsave(&priv->irqlock, flags); + spin_lock_irqsave(&priv->irqlock, flags); /* nb doing the above in the opposite order will deadlock */ - + /* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the - 12 first bytes (containing DA/SA) and put them in the appropriate fields of - the Wireless Header. Thus the packet length is then the initial + 18 (+30-12) */ - + 12 first bytes (containing DA/SA) and put them in the appropriate + fields of the Wireless Header. Thus the packet length is then the + initial + 18 (+30-12) */ + if (!(buff = find_tx_buff(priv, len + 18))) { priv->stats.tx_dropped++; spin_unlock_irqrestore(&priv->irqlock, flags); @@ -862,7 +860,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); return 1; } - + frame_ctl = IEEE80211_FTYPE_DATA; header.duration_id = 0; header.seq_ctl = 0; @@ -878,7 +876,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) memcpy(&header.addr2, dev->dev_addr, 6); memcpy(&header.addr3, skb->data, 6); } - + if (priv->use_wpa) memcpy(&header.addr4, SNAP_RFC1024, 6); @@ -888,27 +886,27 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) /* Copy the packet sans its 802.3 header addresses which have been replaced */ atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12); priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE; - + /* low bit of first byte of destination tells us if broadcast */ tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA); dev->trans_start = jiffies; priv->stats.tx_bytes += len; - + spin_unlock_irqrestore(&priv->irqlock, flags); spin_unlock_bh(&priv->timerlock); dev_kfree_skb(skb); - - return 0; + + return 0; } -static void atmel_transmit_management_frame(struct atmel_private *priv, +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u8 *body, int body_len) { u16 buff; - int len = MGMT_FRAME_BODY_OFFSET + body_len; - - if (!(buff = find_tx_buff(priv, len))) + int len = MGMT_FRAME_BODY_OFFSET + body_len; + + if (!(buff = find_tx_buff(priv, len))) return; atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET); @@ -916,24 +914,25 @@ static void atmel_transmit_management_frame(struct atmel_private *priv, priv->tx_buff_tail += len; tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); } - -static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, + +static void fast_rx_path(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc) { /* fast path: unfragmented packet copy directly into skbuf */ - u8 mac4[6]; - struct sk_buff *skb; + u8 mac4[6]; + struct sk_buff *skb; unsigned char *skbp; - + /* get the final, mac 4 header field, this tells us encapsulation */ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6); msdu_size -= 6; - + if (priv->do_rx_crc) { crc = crc32_le(crc, mac4, 6); msdu_size -= 4; } - + if (!(skb = dev_alloc_skb(msdu_size + 14))) { priv->stats.rx_dropped++; return; @@ -942,7 +941,7 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr skb_reserve(skb, 2); skbp = skb_put(skb, msdu_size + 12); atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size); - + if (priv->do_rx_crc) { u32 netcrc; crc = crc32_le(crc, skbp + 12, msdu_size); @@ -953,24 +952,25 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr return; } } - + memcpy(skbp, header->addr1, 6); /* destination address */ - if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(&skbp[6], header->addr3, 6); else memcpy(&skbp[6], header->addr2, 6); /* source address */ - - priv->dev->last_rx=jiffies; + + priv->dev->last_rx = jiffies; skb->dev = priv->dev; skb->protocol = eth_type_trans(skb, priv->dev); - skb->ip_summed = CHECKSUM_NONE; + skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); priv->stats.rx_bytes += 12 + msdu_size; priv->stats.rx_packets++; } /* Test to see if the packet in card memory at packet_loc has a valid CRC - It doesn't matter that this is slow: it is only used to proble the first few packets. */ + It doesn't matter that this is slow: it is only used to proble the first few + packets. */ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) { int i = msdu_size - 4; @@ -980,7 +980,7 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return 0; atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4); - + atmel_writeAR(priv->dev, packet_loc); while (i--) { u8 octet = atmel_read8(priv->dev, DR); @@ -990,20 +990,22 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return (crc ^ 0xffffffff) == netcrc; } -static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) +static void frag_rx_path(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, + u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, + u8 frag_no, int more_frags) { - u8 mac4[6]; + u8 mac4[6]; u8 source[6]; struct sk_buff *skb; - if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(source, header->addr3, 6); else - memcpy(source, header->addr2, 6); - + memcpy(source, header->addr2, 6); + rx_packet_loc += 24; /* skip header */ - + if (priv->do_rx_crc) msdu_size -= 4; @@ -1012,16 +1014,16 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr msdu_size -= 6; rx_packet_loc += 6; - if (priv->do_rx_crc) + if (priv->do_rx_crc) crc = crc32_le(crc, mac4, 6); - + priv->frag_seq = seq_no; priv->frag_no = 1; priv->frag_len = msdu_size; - memcpy(priv->frag_source, source, 6); + memcpy(priv->frag_source, source, 6); memcpy(&priv->rx_buf[6], source, 6); memcpy(priv->rx_buf, header->addr1, 6); - + atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size); if (priv->do_rx_crc) { @@ -1033,17 +1035,17 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr memset(priv->frag_source, 0xff, 6); } } - + } else if (priv->frag_no == frag_no && priv->frag_seq == seq_no && memcmp(priv->frag_source, source, 6) == 0) { - - atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len], + + atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len], rx_packet_loc, msdu_size); if (priv->do_rx_crc) { u32 netcrc; - crc = crc32_le(crc, - &priv->rx_buf[12 + priv->frag_len], + crc = crc32_le(crc, + &priv->rx_buf[12 + priv->frag_len], msdu_size); atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4); if ((crc ^ 0xffffffff) != netcrc) { @@ -1052,7 +1054,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr more_frags = 1; /* don't send broken assembly */ } } - + priv->frag_len += msdu_size; priv->frag_no++; @@ -1062,60 +1064,60 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr priv->stats.rx_dropped++; } else { skb_reserve(skb, 2); - memcpy(skb_put(skb, priv->frag_len + 12), + memcpy(skb_put(skb, priv->frag_len + 12), priv->rx_buf, priv->frag_len + 12); priv->dev->last_rx = jiffies; skb->dev = priv->dev; skb->protocol = eth_type_trans(skb, priv->dev); - skb->ip_summed = CHECKSUM_NONE; + skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); priv->stats.rx_bytes += priv->frag_len + 12; priv->stats.rx_packets++; } } - } else priv->wstats.discard.fragment++; } - + static void rx_done_irq(struct atmel_private *priv) { int i; struct ieee80211_hdr_4addr header; - - for (i = 0; + + for (i = 0; atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && i < priv->host_info.rx_desc_count; i++) { - + u16 msdu_size, rx_packet_loc, frame_ctl, seq_control; u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head)); u32 crc = 0xffffffff; - + if (status != RX_STATUS_SUCCESS) { if (status == 0xc1) /* determined by experiment */ priv->wstats.discard.nwid++; else - priv->stats.rx_errors++; + priv->stats.rx_errors++; goto next; } msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head)); rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head)); - + if (msdu_size < 30) { - priv->stats.rx_errors++; + priv->stats.rx_errors++; goto next; } - + /* Get header as far as end of seq_ctl */ atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24); frame_ctl = le16_to_cpu(header.frame_ctl); seq_control = le16_to_cpu(header.seq_ctl); - /* probe for CRC use here if needed once five packets have arrived with - the same crc status, we assume we know what's happening and stop probing */ + /* probe for CRC use here if needed once five packets have + arrived with the same crc status, we assume we know what's + happening and stop probing */ if (priv->probe_crc) { if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) { priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size); @@ -1130,34 +1132,33 @@ static void rx_done_irq(struct atmel_private *priv) priv->probe_crc = 0; } } - + /* don't CRC header when WEP in use */ if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) { crc = crc32_le(0xffffffff, (unsigned char *)&header, 24); } msdu_size -= 24; /* header */ - if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { - + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS; u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG; u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4; - - if (!more_fragments && packet_fragment_no == 0 ) { + + if (!more_fragments && packet_fragment_no == 0) { fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc); } else { frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc, packet_sequence_no, packet_fragment_no, more_fragments); } } - + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { /* copy rest of packet into buffer */ atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size); - + /* we use the same buffer for frag reassembly and control packets */ memset(priv->frag_source, 0xff, 6); - + if (priv->do_rx_crc) { /* last 4 octets is crc */ msdu_size -= 4; @@ -1170,18 +1171,18 @@ static void rx_done_irq(struct atmel_private *priv) atmel_management_frame(priv, &header, msdu_size, atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head))); - } + } - next: +next: /* release descriptor */ - atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED); - + atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED); + if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1)) - priv->rx_desc_head++; + priv->rx_desc_head++; else priv->rx_desc_head = 0; } -} +} static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -1189,7 +1190,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs struct atmel_private *priv = netdev_priv(dev); u8 isr; int i = -1; - static u8 irq_order[] = { + static u8 irq_order[] = { ISR_OUT_OF_RANGE, ISR_RxCOMPLETE, ISR_TxCOMPLETE, @@ -1199,20 +1200,19 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs ISR_IBSS_MERGE, ISR_GENERIC_IRQ }; - - if (priv->card && priv->present_callback && + if (priv->card && priv->present_callback && !(*priv->present_callback)(priv->card)) return IRQ_HANDLED; /* In this state upper-level code assumes it can mess with the card unhampered by interrupts which may change register state. Note that even though the card shouldn't generate interrupts - the inturrupt line may be shared. This allows card setup + the inturrupt line may be shared. This allows card setup to go on without disabling interrupts for a long time. */ if (priv->station_state == STATION_STATE_DOWN) return IRQ_NONE; - + atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */ while (1) { @@ -1221,36 +1221,36 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); return IRQ_HANDLED; } - + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - + if (!isr) { atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */ return i == -1 ? IRQ_NONE : IRQ_HANDLED; } - + atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */ - + for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++) if (isr & irq_order[i]) break; - + if (!atmel_lock_mac(priv)) { /* failed to contact card */ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); return IRQ_HANDLED; } - + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); isr ^= irq_order[i]; atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr); atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - + switch (irq_order[i]) { - - case ISR_OUT_OF_RANGE: - if (priv->operating_mode == IW_MODE_INFRA && + + case ISR_OUT_OF_RANGE: + if (priv->operating_mode == IW_MODE_INFRA && priv->station_state == STATION_STATE_READY) { priv->station_is_associated = 0; atmel_scan(priv, 1); @@ -1261,24 +1261,24 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs priv->wstats.discard.misc++; /* fall through */ case ISR_RxCOMPLETE: - rx_done_irq(priv); + rx_done_irq(priv); break; - + case ISR_TxCOMPLETE: - tx_done_irq(priv); + tx_done_irq(priv); break; - + case ISR_FATAL_ERROR: printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name); atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); break; - - case ISR_COMMAND_COMPLETE: + + case ISR_COMMAND_COMPLETE: atmel_command_irq(priv); break; case ISR_IBSS_MERGE: - atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, + atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, priv->CurrentBSSID, 6); /* The WPA stuff cares about the current AP address */ if (priv->use_wpa) @@ -1288,24 +1288,23 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs printk(KERN_INFO "%s: Generic_irq received.\n", dev->name); break; } - } + } } - -static struct net_device_stats *atmel_get_stats (struct net_device *dev) +static struct net_device_stats *atmel_get_stats(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); return &priv->stats; } -static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev) +static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - /* update the link quality here in case we are seeing no beacons + /* update the link quality here in case we are seeing no beacons at all to drive the process */ atmel_smooth_qual(priv); - + priv->wstats.status = priv->station_state; if (priv->operating_mode == IW_MODE_INFRA) { @@ -1328,8 +1327,8 @@ static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev) | IW_QUAL_NOISE_INVALID; priv->wstats.miss.beacon = 0; } - - return (&priv->wstats); + + return &priv->wstats; } static int atmel_change_mtu(struct net_device *dev, int new_mtu) @@ -1343,21 +1342,21 @@ static int atmel_change_mtu(struct net_device *dev, int new_mtu) static int atmel_set_mac_address(struct net_device *dev, void *p) { struct sockaddr *addr = p; - + memcpy (dev->dev_addr, addr->sa_data, dev->addr_len); return atmel_open(dev); } EXPORT_SYMBOL(atmel_open); -int atmel_open (struct net_device *dev) +int atmel_open(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); int i, channel; /* any scheduled timer is no longer needed and might screw things up.. */ del_timer_sync(&priv->management_timer); - + /* Interrupts will not touch the card once in this state... */ priv->station_state = STATION_STATE_DOWN; @@ -1377,7 +1376,7 @@ int atmel_open (struct net_device *dev) priv->site_survey_state = SITE_SURVEY_IDLE; priv->station_is_associated = 0; - if (!reset_atmel_card(dev)) + if (!reset_atmel_card(dev)) return -EAGAIN; if (priv->config_reg_domain) { @@ -1391,26 +1390,26 @@ int atmel_open (struct net_device *dev) if (i == sizeof(channel_table)/sizeof(channel_table[0])) { priv->reg_domain = REG_DOMAIN_MKK1; printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name); - } + } } - + if ((channel = atmel_validate_channel(priv, priv->channel))) priv->channel = channel; - /* this moves station_state on.... */ - atmel_scan(priv, 1); + /* this moves station_state on.... */ + atmel_scan(priv, 1); atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */ return 0; } -static int atmel_close (struct net_device *dev) +static int atmel_close(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - + atmel_enter_state(priv, STATION_STATE_DOWN); - - if (priv->bus_type == BUS_TYPE_PCCARD) + + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); return 0; @@ -1438,43 +1437,46 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv) int i; char *p = buf; char *s, *r, *c; - - p += sprintf(p, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR); - + + p += sprintf(p, "Driver version:\t\t%d.%d\n", + DRIVER_MAJOR, DRIVER_MINOR); + if (priv->station_state != STATION_STATE_DOWN) { - p += sprintf(p, "Firmware version:\t%d.%d build %d\nFirmware location:\t", + p += sprintf(p, "Firmware version:\t%d.%d build %d\n" + "Firmware location:\t", priv->host_info.major_version, priv->host_info.minor_version, priv->host_info.build_version); - - if (priv->card_type != CARD_TYPE_EEPROM) + + if (priv->card_type != CARD_TYPE_EEPROM) p += sprintf(p, "on card\n"); - else if (priv->firmware) - p += sprintf(p, "%s loaded by host\n", priv->firmware_id); + else if (priv->firmware) + p += sprintf(p, "%s loaded by host\n", + priv->firmware_id); else - p += sprintf(p, "%s loaded by hotplug\n", priv->firmware_id); - - switch(priv->card_type) { + p += sprintf(p, "%s loaded by hotplug\n", + priv->firmware_id); + + switch (priv->card_type) { case CARD_TYPE_PARALLEL_FLASH: c = "Parallel flash"; break; case CARD_TYPE_SPI_FLASH: c = "SPI flash\n"; break; case CARD_TYPE_EEPROM: c = "EEPROM"; break; default: c = "<unknown>"; } - r = "<unknown>"; for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) if (priv->reg_domain == channel_table[i].reg_domain) r = channel_table[i].name; - + p += sprintf(p, "MAC memory type:\t%s\n", c); p += sprintf(p, "Regulatory domain:\t%s\n", r); - p += sprintf(p, "Host CRC checking:\t%s\n", + p += sprintf(p, "Host CRC checking:\t%s\n", priv->do_rx_crc ? "On" : "Off"); p += sprintf(p, "WPA-capable firmware:\t%s\n", priv->use_wpa ? "Yes" : "No"); } - + switch(priv->station_state) { case STATION_STATE_SCANNING: s = "Scanning"; break; case STATION_STATE_JOINNING: s = "Joining"; break; @@ -1486,9 +1488,9 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv) case STATION_STATE_DOWN: s = "Down"; break; default: s = "<unknown>"; } - + p += sprintf(p, "Current state:\t\t%s\n", s); - return p - buf; + return p - buf; } static int atmel_read_proc(char *page, char **start, off_t off, @@ -1504,9 +1506,12 @@ static int atmel_read_proc(char *page, char **start, off_t off, return len; } -struct net_device *init_atmel_card( unsigned short irq, unsigned long port, const AtmelFWType fw_type, - struct device *sys_dev, int (*card_present)(void *), void *card) +struct net_device *init_atmel_card(unsigned short irq, unsigned long port, + const AtmelFWType fw_type, + struct device *sys_dev, + int (*card_present)(void *), void *card) { + struct proc_dir_entry *ent; struct net_device *dev; struct atmel_private *priv; int rc; @@ -1514,11 +1519,11 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons /* Create the network device object. */ dev = alloc_etherdev(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n"); + printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n"); return NULL; } if (dev_alloc_name(dev, dev->name) < 0) { - printk(KERN_ERR "atmel: Couldn't get name!\n"); + printk(KERN_ERR "atmel: Couldn't get name!\n"); goto err_out_free; } @@ -1550,7 +1555,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons memset(priv->BSSID, 0, 6); priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */ priv->station_was_associated = 0; - + priv->last_survey = jiffies; priv->preamble = LONG_PREAMBLE; priv->operating_mode = IW_MODE_INFRA; @@ -1586,7 +1591,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons spin_lock_init(&priv->timerlock); priv->management_timer.function = atmel_management_timer; priv->management_timer.data = (unsigned long) dev; - + dev->open = atmel_open; dev->stop = atmel_close; dev->change_mtu = atmel_change_mtu; @@ -1597,44 +1602,46 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons dev->do_ioctl = atmel_ioctl; dev->irq = irq; dev->base_addr = port; - + SET_NETDEV_DEV(dev, sys_dev); - + if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) { - printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc ); + printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc); goto err_out_free; } - if (!request_region(dev->base_addr, 32, + if (!request_region(dev->base_addr, 32, priv->bus_type == BUS_TYPE_PCCARD ? "atmel_cs" : "atmel_pci")) { goto err_out_irq; } - + if (register_netdev(dev)) goto err_out_res; - + if (!probe_atmel_card(dev)){ unregister_netdev(dev); goto err_out_res; } - + netif_carrier_off(dev); - - create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); - + + ent = create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); + if (!ent) + printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); + printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", dev->name, DRIVER_MAJOR, DRIVER_MINOR, dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] ); - + SET_MODULE_OWNER(dev); return dev; - - err_out_res: + +err_out_res: release_region( dev->base_addr, 32); - err_out_irq: +err_out_irq: free_irq(dev->irq, dev); - err_out_free: +err_out_free: free_netdev(dev); return NULL; } @@ -1644,12 +1651,12 @@ EXPORT_SYMBOL(init_atmel_card); void stop_atmel_card(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - + /* put a brick on it... */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); - + del_timer_sync(&priv->management_timer); unregister_netdev(dev); remove_proc_entry("driver/atmel", NULL); @@ -1675,13 +1682,13 @@ static int atmel_set_essid(struct net_device *dev, int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; priv->connect_to_any_BSS = 0; - + /* Check the size of the string */ if (dwrq->length > MAX_SSID_LENGTH + 1) - return -E2BIG ; + return -E2BIG; if (index != 0) return -EINVAL; - + memcpy(priv->new_SSID, extra, dwrq->length - 1); priv->new_SSID_size = dwrq->length - 1; } @@ -1706,7 +1713,7 @@ static int atmel_get_essid(struct net_device *dev, extra[priv->SSID_size] = '\0'; dwrq->length = priv->SSID_size + 1; } - + dwrq->flags = !priv->connect_to_any_BSS; /* active */ return 0; @@ -1768,7 +1775,7 @@ static int atmel_set_encode(struct net_device *dev, /* WE specify that if a valid key is set, encryption * should be enabled (user may turn it off later) * This is also how "iwconfig ethX key on" works */ - if (index == current_index && + if (index == current_index && priv->wep_key_len[index] > 0) { priv->wep_is_on = 1; priv->exclude_unencrypted = 1; @@ -1783,18 +1790,18 @@ static int atmel_set_encode(struct net_device *dev, } else { /* Do we want to just set the transmit key index ? */ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; - if ( index>=0 && index < 4 ) { + if (index >= 0 && index < 4) { priv->default_key = index; } else /* Don't complain if only change the mode */ - if(!dwrq->flags & IW_ENCODE_MODE) { + if (!dwrq->flags & IW_ENCODE_MODE) { return -EINVAL; } } /* Read the flags */ - if(dwrq->flags & IW_ENCODE_DISABLED) { + if (dwrq->flags & IW_ENCODE_DISABLED) { priv->wep_is_on = 0; - priv->encryption_level = 0; + priv->encryption_level = 0; priv->pairwise_cipher_suite = CIPHER_SUITE_NONE; } else { priv->wep_is_on = 1; @@ -1806,15 +1813,14 @@ static int atmel_set_encode(struct net_device *dev, priv->encryption_level = 1; } } - if(dwrq->flags & IW_ENCODE_RESTRICTED) + if (dwrq->flags & IW_ENCODE_RESTRICTED) priv->exclude_unencrypted = 1; - if(dwrq->flags & IW_ENCODE_OPEN) + if(dwrq->flags & IW_ENCODE_OPEN) priv->exclude_unencrypted = 0; - + return -EINPROGRESS; /* Call commit handler */ } - static int atmel_get_encode(struct net_device *dev, struct iw_request_info *info, struct iw_point *dwrq, @@ -1822,7 +1828,7 @@ static int atmel_get_encode(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; - + if (!priv->wep_is_on) dwrq->flags = IW_ENCODE_DISABLED; else { @@ -1843,7 +1849,7 @@ static int atmel_get_encode(struct net_device *dev, memset(extra, 0, 16); memcpy(extra, priv->wep_keys[index], dwrq->length); } - + return 0; } @@ -1862,17 +1868,17 @@ static int atmel_set_rate(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + if (vwrq->fixed == 0) { priv->tx_rate = 3; priv->auto_tx_rate = 1; } else { priv->auto_tx_rate = 0; - + /* Which type of value ? */ - if((vwrq->value < 4) && (vwrq->value >= 0)) { + if ((vwrq->value < 4) && (vwrq->value >= 0)) { /* Setting by rate index */ - priv->tx_rate = vwrq->value; + priv->tx_rate = vwrq->value; } else { /* Setting by frequency value */ switch (vwrq->value) { @@ -1899,7 +1905,7 @@ static int atmel_set_mode(struct net_device *dev, return -EINVAL; priv->operating_mode = *uwrq; - return -EINPROGRESS; + return -EINPROGRESS; } static int atmel_get_mode(struct net_device *dev, @@ -1908,7 +1914,7 @@ static int atmel_get_mode(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + *uwrq = priv->operating_mode; return 0; } @@ -1962,9 +1968,9 @@ static int atmel_set_retry(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - - if(!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { - if(vwrq->flags & IW_RETRY_MAX) + + if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { + if (vwrq->flags & IW_RETRY_MAX) priv->long_retry = vwrq->value; else if (vwrq->flags & IW_RETRY_MIN) priv->short_retry = vwrq->value; @@ -1973,9 +1979,9 @@ static int atmel_set_retry(struct net_device *dev, priv->long_retry = vwrq->value; priv->short_retry = vwrq->value; } - return -EINPROGRESS; + return -EINPROGRESS; } - + return -EINVAL; } @@ -1989,13 +1995,13 @@ static int atmel_get_retry(struct net_device *dev, vwrq->disabled = 0; /* Can't be disabled */ /* Note : by default, display the min retry number */ - if((vwrq->flags & IW_RETRY_MAX)) { + if (vwrq->flags & IW_RETRY_MAX) { vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; vwrq->value = priv->long_retry; } else { vwrq->flags = IW_RETRY_LIMIT; vwrq->value = priv->short_retry; - if(priv->long_retry != priv->short_retry) + if (priv->long_retry != priv->short_retry) vwrq->flags |= IW_RETRY_MIN; } @@ -2010,13 +2016,13 @@ static int atmel_set_rts(struct net_device *dev, struct atmel_private *priv = netdev_priv(dev); int rthr = vwrq->value; - if(vwrq->disabled) + if (vwrq->disabled) rthr = 2347; - if((rthr < 0) || (rthr > 2347)) { + if ((rthr < 0) || (rthr > 2347)) { return -EINVAL; } priv->rts_threshold = rthr; - + return -EINPROGRESS; /* Call commit handler */ } @@ -2026,7 +2032,7 @@ static int atmel_get_rts(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + vwrq->value = priv->rts_threshold; vwrq->disabled = (vwrq->value >= 2347); vwrq->fixed = 1; @@ -2042,14 +2048,14 @@ static int atmel_set_frag(struct net_device *dev, struct atmel_private *priv = netdev_priv(dev); int fthr = vwrq->value; - if(vwrq->disabled) + if (vwrq->disabled) fthr = 2346; - if((fthr < 256) || (fthr > 2346)) { + if ((fthr < 256) || (fthr > 2346)) { return -EINVAL; } fthr &= ~0x1; /* Get an even value - is it really needed ??? */ priv->frag_threshold = fthr; - + return -EINPROGRESS; /* Call commit handler */ } @@ -2077,21 +2083,21 @@ static int atmel_set_freq(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); int rc = -EINPROGRESS; /* Call commit handler */ - + /* If setting by frequency, convert to a channel */ - if((fwrq->e == 1) && - (fwrq->m >= (int) 241200000) && - (fwrq->m <= (int) 248700000)) { + if ((fwrq->e == 1) && + (fwrq->m >= (int) 241200000) && + (fwrq->m <= (int) 248700000)) { int f = fwrq->m / 100000; int c = 0; - while((c < 14) && (f != frequency_list[c])) + while ((c < 14) && (f != frequency_list[c])) c++; /* Hack to fall through... */ fwrq->e = 0; fwrq->m = c + 1; } /* Setting by channel number */ - if((fwrq->m > 1000) || (fwrq->e > 0)) + if ((fwrq->m > 1000) || (fwrq->e > 0)) rc = -EOPNOTSUPP; else { int channel = fwrq->m; @@ -2099,7 +2105,7 @@ static int atmel_set_freq(struct net_device *dev, priv->channel = channel; } else { rc = -EINVAL; - } + } } return rc; } @@ -2130,7 +2136,7 @@ static int atmel_set_scan(struct net_device *dev, * This is not an error, while the device perform scanning, * traffic doesn't flow, so it's a perfect DoS... * Jean II */ - + if (priv->station_state == STATION_STATE_DOWN) return -EAGAIN; @@ -2142,15 +2148,15 @@ static int atmel_set_scan(struct net_device *dev, /* Initiate a scan command */ if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS) return -EBUSY; - + del_timer_sync(&priv->management_timer); spin_lock_irqsave(&priv->irqlock, flags); - + priv->site_survey_state = SITE_SURVEY_IN_PROGRESS; priv->fast_scan = 0; atmel_scan(priv, 0); spin_unlock_irqrestore(&priv->irqlock, flags); - + return 0; } @@ -2163,11 +2169,11 @@ static int atmel_get_scan(struct net_device *dev, int i; char *current_ev = extra; struct iw_event iwe; - + if (priv->site_survey_state != SITE_SURVEY_COMPLETED) return -EAGAIN; - - for(i=0; i<priv->BSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6); @@ -2179,16 +2185,16 @@ static int atmel_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID); - + iwe.cmd = SIOCGIWMODE; iwe.u.mode = priv->BSSinfo[i].BSStype; current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); - + iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = priv->BSSinfo[i].channel; iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); - + iwe.cmd = SIOCGIWENCODE; if (priv->BSSinfo[i].UsingWEP) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; @@ -2196,13 +2202,12 @@ static int atmel_get_scan(struct net_device *dev, iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); - } /* Length of data */ dwrq->length = (current_ev - extra); - dwrq->flags = 0; - + dwrq->flags = 0; + return 0; } @@ -2213,7 +2218,7 @@ static int atmel_get_range(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); struct iw_range *range = (struct iw_range *) extra; - int k,i,j; + int k, i, j; dwrq->length = sizeof(struct iw_range); memset(range, 0, sizeof(struct iw_range)); @@ -2226,14 +2231,14 @@ static int atmel_get_range(struct net_device *dev, break; } if (range->num_channels != 0) { - for(k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) { + for (k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) { range->freq[k].i = i; /* List index */ - range->freq[k].m = frequency_list[i-1] * 100000; + range->freq[k].m = frequency_list[i - 1] * 100000; range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */ } range->num_frequency = k; } - + range->max_qual.qual = 100; range->max_qual.level = 100; range->max_qual.noise = 0; @@ -2261,11 +2266,11 @@ static int atmel_get_range(struct net_device *dev, range->encoding_size[1] = 13; range->num_encoding_sizes = 2; range->max_encoding_tokens = 4; - + range->pmp_flags = IW_POWER_ON; range->pmt_flags = IW_POWER_ON; range->pm_capa = 0; - + range->we_version_source = WIRELESS_EXT; range->we_version_compiled = WIRELESS_EXT; range->retry_capa = IW_RETRY_LIMIT ; @@ -2289,7 +2294,7 @@ static int atmel_set_wap(struct net_device *dev, if (awrq->sa_family != ARPHRD_ETHER) return -EINVAL; - + if (memcmp(bcast, awrq->sa_data, 6) == 0) { del_timer_sync(&priv->management_timer); spin_lock_irqsave(&priv->irqlock, flags); @@ -2297,8 +2302,8 @@ static int atmel_set_wap(struct net_device *dev, spin_unlock_irqrestore(&priv->irqlock, flags); return 0; } - - for(i=0; i<priv->BSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) { if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) { return -EINVAL; @@ -2313,10 +2318,10 @@ static int atmel_set_wap(struct net_device *dev, } } } - + return -EINVAL; } - + static int atmel_config_commit(struct net_device *dev, struct iw_request_info *info, /* NULL */ void *zwrq, /* NULL */ @@ -2325,18 +2330,18 @@ static int atmel_config_commit(struct net_device *dev, return atmel_open(dev); } -static const iw_handler atmel_handler[] = +static const iw_handler atmel_handler[] = { (iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */ - (iw_handler) atmel_get_name, /* SIOCGIWNAME */ + (iw_handler) atmel_get_name, /* SIOCGIWNAME */ (iw_handler) NULL, /* SIOCSIWNWID */ (iw_handler) NULL, /* SIOCGIWNWID */ (iw_handler) atmel_set_freq, /* SIOCSIWFREQ */ (iw_handler) atmel_get_freq, /* SIOCGIWFREQ */ (iw_handler) atmel_set_mode, /* SIOCSIWMODE */ (iw_handler) atmel_get_mode, /* SIOCGIWMODE */ - (iw_handler) NULL, /* SIOCSIWSENS */ - (iw_handler) NULL, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWSENS */ + (iw_handler) NULL, /* SIOCGIWSENS */ (iw_handler) NULL, /* SIOCSIWRANGE */ (iw_handler) atmel_get_range, /* SIOCGIWRANGE */ (iw_handler) NULL, /* SIOCSIWPRIV */ @@ -2350,13 +2355,13 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_set_wap, /* SIOCSIWAP */ (iw_handler) atmel_get_wap, /* SIOCGIWAP */ (iw_handler) NULL, /* -- hole -- */ - (iw_handler) NULL, /* SIOCGIWAPLIST */ + (iw_handler) NULL, /* SIOCGIWAPLIST */ (iw_handler) atmel_set_scan, /* SIOCSIWSCAN */ (iw_handler) atmel_get_scan, /* SIOCGIWSCAN */ (iw_handler) atmel_set_essid, /* SIOCSIWESSID */ (iw_handler) atmel_get_essid, /* SIOCGIWESSID */ - (iw_handler) NULL, /* SIOCSIWNICKN */ - (iw_handler) NULL, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* SIOCSIWNICKN */ + (iw_handler) NULL, /* SIOCGIWNICKN */ (iw_handler) NULL, /* -- hole -- */ (iw_handler) NULL, /* -- hole -- */ (iw_handler) atmel_set_rate, /* SIOCSIWRATE */ @@ -2365,8 +2370,8 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_get_rts, /* SIOCGIWRTS */ (iw_handler) atmel_set_frag, /* SIOCSIWFRAG */ (iw_handler) atmel_get_frag, /* SIOCGIWFRAG */ - (iw_handler) NULL, /* SIOCSIWTXPOW */ - (iw_handler) NULL, /* SIOCGIWTXPOW */ + (iw_handler) NULL, /* SIOCSIWTXPOW */ + (iw_handler) NULL, /* SIOCGIWTXPOW */ (iw_handler) atmel_set_retry, /* SIOCSIWRETRY */ (iw_handler) atmel_get_retry, /* SIOCGIWRETRY */ (iw_handler) atmel_set_encode, /* SIOCSIWENCODE */ @@ -2375,39 +2380,51 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_get_power, /* SIOCGIWPOWER */ }; - -static const iw_handler atmel_private_handler[] = +static const iw_handler atmel_private_handler[] = { NULL, /* SIOCIWFIRSTPRIV */ }; typedef struct atmel_priv_ioctl { char id[32]; - unsigned char __user *data; - unsigned short len; + unsigned char __user *data; + unsigned short len; } atmel_priv_ioctl; - -#define ATMELFWL SIOCIWFIRSTPRIV -#define ATMELIDIFC ATMELFWL + 1 -#define ATMELRD ATMELFWL + 2 -#define ATMELMAGIC 0x51807 +#define ATMELFWL SIOCIWFIRSTPRIV +#define ATMELIDIFC ATMELFWL + 1 +#define ATMELRD ATMELFWL + 2 +#define ATMELMAGIC 0x51807 #define REGDOMAINSZ 20 static const struct iw_priv_args atmel_private_args[] = { -/*{ cmd, set_args, get_args, name } */ - { ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" }, - { ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" }, - { ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" }, + { + .cmd = ATMELFWL, + .set_args = IW_PRIV_TYPE_BYTE + | IW_PRIV_SIZE_FIXED + | sizeof (atmel_priv_ioctl), + .get_args = IW_PRIV_TYPE_NONE, + .name = "atmelfwl" + }, { + .cmd = ATMELIDIFC, + .set_args = IW_PRIV_TYPE_NONE, + .get_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + .name = "atmelidifc" + }, { + .cmd = ATMELRD, + .set_args = IW_PRIV_TYPE_CHAR | REGDOMAINSZ, + .get_args = IW_PRIV_TYPE_NONE, + .name = "regdomain" + }, }; -static const struct iw_handler_def atmel_handler_def = +static const struct iw_handler_def atmel_handler_def = { .num_standard = sizeof(atmel_handler)/sizeof(iw_handler), - .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), - .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), + .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), .standard = (iw_handler *) atmel_handler, - .private = (iw_handler *) atmel_private_handler, + .private = (iw_handler *) atmel_private_handler, .private_args = (struct iw_priv_args *) atmel_private_args, .get_wireless_stats = atmel_get_wireless_stats }; @@ -2419,13 +2436,13 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) atmel_priv_ioctl com; struct iwreq *wrq = (struct iwreq *) rq; unsigned char *new_firmware; - char domain[REGDOMAINSZ+1]; + char domain[REGDOMAINSZ + 1]; switch (cmd) { case ATMELIDIFC: - wrq->u.param.value = ATMELMAGIC; + wrq->u.param.value = ATMELMAGIC; break; - + case ATMELFWL: if (copy_from_user(&com, rq->ifr_data, sizeof(com))) { rc = -EFAULT; @@ -2449,7 +2466,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } kfree(priv->firmware); - + priv->firmware = new_firmware; priv->firmware_length = com.len; strncpy(priv->firmware_id, com.id, 31); @@ -2461,7 +2478,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = -EFAULT; break; } - + if (!capable(CAP_NET_ADMIN)) { rc = -EPERM; break; @@ -2484,15 +2501,15 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = 0; } } - + if (rc == 0 && priv->station_state != STATION_STATE_DOWN) rc = atmel_open(dev); break; - + default: rc = -EOPNOTSUPP; } - + return rc; } @@ -2503,17 +2520,17 @@ struct auth_body { u8 el_id; u8 chall_text_len; u8 chall_text[253]; -}; +}; static void atmel_enter_state(struct atmel_private *priv, int new_state) { int old_state = priv->station_state; - + if (new_state == old_state) return; - + priv->station_state = new_state; - + if (new_state == STATION_STATE_READY) { netif_start_queue(priv->dev); netif_carrier_on(priv->dev); @@ -2540,7 +2557,7 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid) u8 options; u8 SSID_size; } cmd; - + memset(cmd.BSSID, 0xff, 6); if (priv->fast_scan) { @@ -2554,17 +2571,17 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid) cmd.min_channel_time = cpu_to_le16(10); cmd.max_channel_time = cpu_to_le16(120); } - + cmd.options = 0; - + if (!specific_ssid) cmd.options |= SCAN_OPTIONS_SITE_SURVEY; - - cmd.channel = (priv->channel & 0x7f); + + cmd.channel = (priv->channel & 0x7f); cmd.scan_type = SCAN_TYPE_ACTIVE; - cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ? + cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ? BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE); - + atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd)); /* This must come after all hardware access to avoid being messed up @@ -2591,16 +2608,15 @@ static void join(struct atmel_private *priv, int type) cmd.BSS_type = type; cmd.timeout = cpu_to_le16(2000); - atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd)); + atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd)); } - static void start(struct atmel_private *priv, int type) { struct { u8 BSSID[6]; u8 SSID[MAX_SSID_LENGTH]; - u8 BSS_type; + u8 BSS_type; u8 channel; u8 SSID_size; u8 reserved[3]; @@ -2612,13 +2628,14 @@ static void start(struct atmel_private *priv, int type) cmd.BSS_type = type; cmd.channel = (priv->channel & 0x7f); - atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd)); + atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd)); } -static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel) +static void handle_beacon_probe(struct atmel_private *priv, u16 capability, + u8 channel) { int rejoin = 0; - int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? SHORT_PREAMBLE : LONG_PREAMBLE; if (priv->preamble != new) { @@ -2626,48 +2643,48 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c rejoin = 1; atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new); } - + if (priv->channel != channel) { priv->channel = channel; rejoin = 1; atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel); } - + if (rejoin) { priv->station_is_associated = 0; atmel_enter_state(priv, STATION_STATE_JOINNING); - + if (priv->operating_mode == IW_MODE_INFRA) join(priv, BSS_TYPE_INFRASTRUCTURE); - else + else join(priv, BSS_TYPE_AD_HOC); - } + } } - -static void send_authentication_request(struct atmel_private *priv, u16 system, u8 *challenge, int challenge_len) +static void send_authentication_request(struct atmel_private *priv, u16 system, + u8 *challenge, int challenge_len) { struct ieee80211_hdr_4addr header; struct auth_body auth; - - header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); - header.duration_id = cpu_to_le16(0x8000); + + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); + header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; memcpy(header.addr1, priv->CurrentBSSID, 6); memcpy(header.addr2, priv->dev->dev_addr, 6); memcpy(header.addr3, priv->CurrentBSSID, 6); - - if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1) + + if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1) /* no WEP for authentication frames with TrSeqNo 1 */ header.frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); - - auth.alg = cpu_to_le16(system); + + auth.alg = cpu_to_le16(system); auth.status = 0; auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum); - priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1; + priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1; priv->CurrentAuthentTransactionSeqNum += 2; - + if (challenge_len != 0) { auth.el_id = 16; /* challenge_text */ auth.chall_text_len = challenge_len; @@ -2685,7 +2702,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) struct ieee80211_hdr_4addr header; struct ass_req_format { u16 capability; - u16 listen_interval; + u16 listen_interval; u8 ap[6]; /* nothing after here directly accessible */ u8 ssid_el_id; u8 ssid_len; @@ -2694,15 +2711,15 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) u8 sup_rates_len; u8 rates[4]; } body; - - header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | (is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ)); header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; - memcpy(header.addr1, priv->CurrentBSSID, 6); + memcpy(header.addr1, priv->CurrentBSSID, 6); memcpy(header.addr2, priv->dev->dev_addr, 6); - memcpy(header.addr3, priv->CurrentBSSID, 6); + memcpy(header.addr3, priv->CurrentBSSID, 6); body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS); if (priv->wep_is_on) @@ -2711,18 +2728,18 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble); body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period); - + /* current AP address - only in reassoc frame */ if (is_reassoc) { - memcpy(body.ap, priv->CurrentBSSID, 6); + memcpy(body.ap, priv->CurrentBSSID, 6); ssid_el_p = (u8 *)&body.ssid_el_id; bodysize = 18 + priv->SSID_size; } else { ssid_el_p = (u8 *)&body.ap[0]; bodysize = 12 + priv->SSID_size; } - - ssid_el_p[0]= C80211_MGMT_ElementID_SSID; + + ssid_el_p[0] = C80211_MGMT_ElementID_SSID; ssid_el_p[1] = priv->SSID_size; memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size); ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates; @@ -2732,7 +2749,8 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); } -static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header) +static int is_frame_from_current_bss(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header) { if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; @@ -2745,29 +2763,29 @@ static int retrieve_bss(struct atmel_private *priv) int i; int max_rssi = -128; int max_index = -1; - + if (priv->BSS_list_entries == 0) return -1; - + if (priv->connect_to_any_BSS) { - /* Select a BSS with the max-RSSI but of the same type and of the same WEP mode - and that it is not marked as 'bad' (i.e. we had previously failed to connect to - this BSS with the settings that we currently use) */ + /* Select a BSS with the max-RSSI but of the same type and of + the same WEP mode and that it is not marked as 'bad' (i.e. + we had previously failed to connect to this BSS with the + settings that we currently use) */ priv->current_BSS = 0; - for(i=0; i<priv->BSS_list_entries; i++) { + for (i = 0; i < priv->BSS_list_entries; i++) { if (priv->operating_mode == priv->BSSinfo[i].BSStype && - ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) || + ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) || (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) && !(priv->BSSinfo[i].channel & 0x80)) { max_rssi = priv->BSSinfo[i].RSSI; priv->current_BSS = max_index = i; } - } return max_index; } - - for(i=0; i<priv->BSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { if (priv->SSID_size == priv->BSSinfo[i].SSIDsize && memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 && priv->operating_mode == priv->BSSinfo[i].BSStype && @@ -2781,19 +2799,19 @@ static int retrieve_bss(struct atmel_private *priv) return max_index; } - -static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 capability, u16 beacon_period, u8 channel, u8 rssi, - u8 ssid_len, u8 *ssid, int is_beacon) +static void store_bss_info(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 capability, + u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, + u8 *ssid, int is_beacon) { u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3; int i, index; - - for (index = -1, i = 0; i < priv->BSS_list_entries; i++) - if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0) + + for (index = -1, i = 0; i < priv->BSS_list_entries; i++) + if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0) index = i; - /* If we process a probe and an entry from this BSS exists + /* If we process a probe and an entry from this BSS exists we will update the BSS entry with the info from this BSS. If we process a beacon we will only update RSSI */ @@ -2820,8 +2838,8 @@ static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4add priv->BSSinfo[index].BSStype = IW_MODE_ADHOC; else if (capability & C80211_MGMT_CAPABILITY_ESS) priv->BSSinfo[index].BSStype =IW_MODE_INFRA; - - priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + + priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? SHORT_PREAMBLE : LONG_PREAMBLE; } @@ -2831,8 +2849,8 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) u16 status = le16_to_cpu(auth->status); u16 trans_seq_no = le16_to_cpu(auth->trans_seq); u16 system = le16_to_cpu(auth->alg); - - if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { + + if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { /* no WEP */ if (priv->station_was_associated) { atmel_enter_state(priv, STATION_STATE_REASSOCIATING); @@ -2842,20 +2860,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) atmel_enter_state(priv, STATION_STATE_ASSOCIATING); send_association_request(priv, 0); return; - } + } } - - if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { + + if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { /* WEP */ if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum) return; - + if (trans_seq_no == 0x0002 && auth->el_id == C80211_MGMT_ElementID_ChallengeText) { send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len); return; } - + if (trans_seq_no == 0x0004) { if(priv->station_was_associated) { atmel_enter_state(priv, STATION_STATE_REASSOCIATING); @@ -2865,10 +2883,10 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) atmel_enter_state(priv, STATION_STATE_ASSOCIATING); send_association_request(priv, 0); return; - } + } } - } - + } + if (status == C80211_MGMT_SC_AuthAlgNotSupported) { /* Do opensystem first, then try sharedkey */ if (system == C80211_MGMT_AAN_OPENSYSTEM) { @@ -2876,17 +2894,16 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0); } else if (priv->connect_to_any_BSS) { int bss_index; - + priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - + if ((bss_index = retrieve_bss(priv)) != -1) { atmel_join_bss(priv, bss_index); return; } } } - - + priv->AuthenticationRequestRetryCnt = 0; atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; @@ -2902,38 +2919,44 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) u8 length; u8 rates[4]; } *ass_resp = (struct ass_resp_format *)priv->rx_buf; - - u16 status = le16_to_cpu(ass_resp->status); + + u16 status = le16_to_cpu(ass_resp->status); u16 ass_id = le16_to_cpu(ass_resp->ass_id); - u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length; - + u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length; + if (frame_len < 8 + rates_len) return; - + if (status == C80211_MGMT_SC_Success) { if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE) priv->AssociationRequestRetryCnt = 0; else priv->ReAssociationRequestRetryCnt = 0; - - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff); - atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len); + + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff); + atmel_set_mib(priv, Phy_Mib_Type, + PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len); if (priv->power_mode == 0) { priv->listen_interval = 1; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); } else { priv->listen_interval = 2; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, PS_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, PS_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2); } - + priv->station_is_associated = 1; priv->station_was_associated = 1; atmel_enter_state(priv, STATION_STATE_READY); return; } - + if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE && status != C80211_MGMT_SC_AssDeniedBSSRate && status != C80211_MGMT_SC_SupportCapabilities && @@ -2943,7 +2966,7 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) send_association_request(priv, 0); return; } - + if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE && status != C80211_MGMT_SC_AssDeniedBSSRate && status != C80211_MGMT_SC_SupportCapabilities && @@ -2953,17 +2976,16 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) send_association_request(priv, 1); return; } - + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; - - if(priv->connect_to_any_BSS) { + + if (priv->connect_to_any_BSS) { int bss_index; priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - - if ((bss_index = retrieve_bss(priv)) != -1) + + if ((bss_index = retrieve_bss(priv)) != -1) atmel_join_bss(priv, bss_index); - } } @@ -2977,7 +2999,7 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) /* The WPA stuff cares about the current AP address */ if (priv->use_wpa) build_wpa_mib(priv); - + /* When switching to AdHoc turn OFF Power Save if needed */ if (bss->BSStype == IW_MODE_ADHOC && @@ -2985,25 +3007,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) priv->power_mode) { priv->power_mode = 0; priv->listen_interval = 1; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); } - + priv->operating_mode = bss->BSStype; - priv->channel = bss->channel & 0x7f; + priv->channel = bss->channel & 0x7f; priv->beacon_period = bss->beacon_period; - + if (priv->preamble != bss->preamble) { priv->preamble = bss->preamble; - atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, bss->preamble); + atmel_set_mib8(priv, Local_Mib_Type, + LOCAL_MIB_PREAMBLE_TYPE, bss->preamble); } - + if (!priv->wep_is_on && bss->UsingWEP) { atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; return; } - + if (priv->wep_is_on && !bss->UsingWEP) { atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; @@ -3011,30 +3036,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) } atmel_enter_state(priv, STATION_STATE_JOINNING); - + if (priv->operating_mode == IW_MODE_INFRA) join(priv, BSS_TYPE_INFRASTRUCTURE); - else + else join(priv, BSS_TYPE_AD_HOC); } - static void restart_search(struct atmel_private *priv) { int bss_index; - + if (!priv->connect_to_any_BSS) { atmel_scan(priv, 1); } else { priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - - if ((bss_index = retrieve_bss(priv)) != -1) + + if ((bss_index = retrieve_bss(priv)) != -1) atmel_join_bss(priv, bss_index); else atmel_scan(priv, 0); - - } -} + } +} static void smooth_rssi(struct atmel_private *priv, u8 rssi) { @@ -3050,21 +3073,21 @@ static void smooth_rssi(struct atmel_private *priv, u8 rssi) } rssi = rssi * 100 / max_rssi; - if((rssi + old) % 2) - priv->wstats.qual.level = ((rssi + old)/2) + 1; + if ((rssi + old) % 2) + priv->wstats.qual.level = (rssi + old) / 2 + 1; else - priv->wstats.qual.level = ((rssi + old)/2); + priv->wstats.qual.level = (rssi + old) / 2; priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED; priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID; } static void atmel_smooth_qual(struct atmel_private *priv) { - unsigned long time_diff = (jiffies - priv->last_qual)/HZ; + unsigned long time_diff = (jiffies - priv->last_qual) / HZ; while (time_diff--) { priv->last_qual += HZ; - priv->wstats.qual.qual = priv->wstats.qual.qual/2; - priv->wstats.qual.qual += + priv->wstats.qual.qual = priv->wstats.qual.qual / 2; + priv->wstats.qual.qual += priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000; priv->beacons_this_sec = 0; } @@ -3073,15 +3096,17 @@ static void atmel_smooth_qual(struct atmel_private *priv) } /* deals with incoming managment frames. */ -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 frame_len, u8 rssi) +static void atmel_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, + u16 frame_len, u8 rssi) { u16 subtype; - - switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE) { - case C80211_SUBTYPE_MGMT_BEACON : + + subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE; + switch (subtype) { + case C80211_SUBTYPE_MGMT_BEACON: case C80211_SUBTYPE_MGMT_ProbeResponse: - + /* beacon frame has multiple variable-length fields - never let an engineer loose with a data structure design. */ { @@ -3099,7 +3124,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ u8 ds_length; /* ds here */ } *beacon = (struct beacon_format *)priv->rx_buf; - + u8 channel, rates_length, ssid_length; u64 timestamp = le64_to_cpu(beacon->timestamp); u16 beacon_interval = le16_to_cpu(beacon->interval); @@ -3107,7 +3132,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ u8 *beaconp = priv->rx_buf; ssid_length = beacon->ssid_length; /* this blows chunks. */ - if (frame_len < 14 || frame_len < ssid_length + 15) + if (frame_len < 14 || frame_len < ssid_length + 15) return; rates_length = beaconp[beacon->ssid_length + 15]; if (frame_len < ssid_length + rates_length + 18) @@ -3115,10 +3140,10 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ if (ssid_length > MAX_SSID_LENGTH) return; channel = beaconp[ssid_length + rates_length + 18]; - + if (priv->station_state == STATION_STATE_READY) { smooth_rssi(priv, rssi); - if (is_frame_from_current_bss(priv, header)) { + if (is_frame_from_current_bss(priv, header)) { priv->beacons_this_sec++; atmel_smooth_qual(priv); if (priv->last_beacon_timestamp) { @@ -3132,41 +3157,43 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ handle_beacon_probe(priv, capability, channel); } } - - if (priv->station_state == STATION_STATE_SCANNING ) - store_bss_info(priv, header, capability, beacon_interval, channel, - rssi, ssid_length, &beacon->rates_el_id, - subtype == C80211_SUBTYPE_MGMT_BEACON) ; + + if (priv->station_state == STATION_STATE_SCANNING) + store_bss_info(priv, header, capability, + beacon_interval, channel, rssi, + ssid_length, + &beacon->rates_el_id, + subtype == C80211_SUBTYPE_MGMT_BEACON); } break; - + case C80211_SUBTYPE_MGMT_Authentication: if (priv->station_state == STATION_STATE_AUTHENTICATING) authenticate(priv, frame_len); - + break; - + case C80211_SUBTYPE_MGMT_ASS_RESPONSE: case C80211_SUBTYPE_MGMT_REASS_RESPONSE: - - if (priv->station_state == STATION_STATE_ASSOCIATING || + + if (priv->station_state == STATION_STATE_ASSOCIATING || priv->station_state == STATION_STATE_REASSOCIATING) associate(priv, frame_len, subtype); - + break; case C80211_SUBTYPE_MGMT_DISASSOSIATION: - if (priv->station_is_associated && - priv->operating_mode == IW_MODE_INFRA && + if (priv->station_is_associated && + priv->operating_mode == IW_MODE_INFRA && is_frame_from_current_bss(priv, header)) { priv->station_was_associated = 0; priv->station_is_associated = 0; - + atmel_enter_state(priv, STATION_STATE_JOINNING); join(priv, BSS_TYPE_INFRASTRUCTURE); } - + break; case C80211_SUBTYPE_MGMT_Deauthentication: @@ -3177,7 +3204,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ atmel_enter_state(priv, STATION_STATE_JOINNING); join(priv, BSS_TYPE_INFRASTRUCTURE); } - + break; } } @@ -3185,76 +3212,73 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ /* run when timer expires */ static void atmel_management_timer(u_long a) { - struct net_device *dev = (struct net_device *) a; - struct atmel_private *priv = netdev_priv(dev); - unsigned long flags; - - /* Check if the card has been yanked. */ - if (priv->card && priv->present_callback && - !(*priv->present_callback)(priv->card)) - return; - - spin_lock_irqsave(&priv->irqlock, flags); - - switch (priv->station_state) { - - case STATION_STATE_AUTHENTICATING: - if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->AuthenticationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->AuthenticationRequestRetryCnt++; - priv->CurrentAuthentTransactionSeqNum = 0x0001; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0); - } - - break; + struct net_device *dev = (struct net_device *) a; + struct atmel_private *priv = netdev_priv(dev); + unsigned long flags; - case STATION_STATE_ASSOCIATING: - if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->AssociationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->AssociationRequestRetryCnt++; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_association_request(priv, 0); - } + /* Check if the card has been yanked. */ + if (priv->card && priv->present_callback && + !(*priv->present_callback)(priv->card)) + return; - break; - - case STATION_STATE_REASSOCIATING: - if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->ReAssociationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->ReAssociationRequestRetryCnt++; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_association_request(priv, 1); - } + spin_lock_irqsave(&priv->irqlock, flags); + + switch (priv->station_state) { + case STATION_STATE_AUTHENTICATING: + if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AuthenticationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AuthenticationRequestRetryCnt++; + priv->CurrentAuthentTransactionSeqNum = 0x0001; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0); + } break; - - default: + + case STATION_STATE_ASSOCIATING: + if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 0); + } break; - } - - spin_unlock_irqrestore(&priv->irqlock, flags); + + case STATION_STATE_REASSOCIATING: + if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->ReAssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->ReAssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 1); + } + break; + + default: + break; + } + + spin_unlock_irqrestore(&priv->irqlock, flags); } - + static void atmel_command_irq(struct atmel_private *priv) { u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET)); int fast_scan; - - if (status == CMD_STATUS_IDLE || + + if (status == CMD_STATUS_IDLE || status == CMD_STATUS_IN_PROGRESS) return; @@ -3266,20 +3290,20 @@ static void atmel_command_irq(struct atmel_private *priv) atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, (u8 *)priv->CurrentBSSID, 6); atmel_enter_state(priv, STATION_STATE_READY); - } + } break; - + case CMD_Scan: fast_scan = priv->fast_scan; priv->fast_scan = 0; - + if (status != CMD_STATUS_COMPLETE) { atmel_scan(priv, 1); } else { int bss_index = retrieve_bss(priv); if (bss_index != -1) { atmel_join_bss(priv, bss_index); - } else if (priv->operating_mode == IW_MODE_ADHOC && + } else if (priv->operating_mode == IW_MODE_ADHOC && priv->SSID_size != 0) { start(priv, BSS_TYPE_AD_HOC); } else { @@ -3289,16 +3313,16 @@ static void atmel_command_irq(struct atmel_private *priv) priv->site_survey_state = SITE_SURVEY_COMPLETED; } break; - + case CMD_SiteSurvey: priv->fast_scan = 0; - + if (status != CMD_STATUS_COMPLETE) return; - + priv->site_survey_state = SITE_SURVEY_COMPLETED; if (priv->station_is_associated) { - atmel_enter_state(priv, STATION_STATE_READY); + atmel_enter_state(priv, STATION_STATE_READY); } else { atmel_scan(priv, 1); } @@ -3312,16 +3336,15 @@ static void atmel_command_irq(struct atmel_private *priv) } else { priv->AuthenticationRequestRetryCnt = 0; atmel_enter_state(priv, STATION_STATE_AUTHENTICATING); - + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); priv->CurrentAuthentTransactionSeqNum = 0x0001; send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0); } return; } - + atmel_scan(priv, 1); - } } @@ -3333,20 +3356,20 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) if (priv->card_type == CARD_TYPE_SPI_FLASH) atmel_set_gcr(priv->dev, GCR_REMAP); - + /* wake up on-board processor */ atmel_clear_gcr(priv->dev, 0x0040); atmel_write16(priv->dev, BSR, BSS_SRAM); - + if (priv->card_type == CARD_TYPE_SPI_FLASH) mdelay(100); /* and wait for it */ - for (i = LOOP_RETRY_LIMIT; i; i--) { + for (i = LOOP_RETRY_LIMIT; i; i--) { mr1 = atmel_read16(priv->dev, MR1); mr3 = atmel_read16(priv->dev, MR3); - - if (mr3 & MAC_BOOT_COMPLETE) + + if (mr3 & MAC_BOOT_COMPLETE) break; if (mr1 & MAC_BOOT_COMPLETE && priv->bus_type == BUS_TYPE_PCCARD) @@ -3357,35 +3380,36 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name); return 0; } - + if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) { printk(KERN_ALERT "%s: card missing.\n", priv->dev->name); return 0; } - - /* now check for completion of MAC initialization through - the FunCtrl field of the IFACE, poll MR1 to detect completion of - MAC initialization, check completion status, set interrupt mask, - enables interrupts and calls Tx and Rx initialization functions */ - + + /* now check for completion of MAC initialization through + the FunCtrl field of the IFACE, poll MR1 to detect completion of + MAC initialization, check completion status, set interrupt mask, + enables interrupts and calls Tx and Rx initialization functions */ + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE); - - for (i = LOOP_RETRY_LIMIT; i; i--) { + + for (i = LOOP_RETRY_LIMIT; i; i--) { mr1 = atmel_read16(priv->dev, MR1); mr3 = atmel_read16(priv->dev, MR3); - - if (mr3 & MAC_INIT_COMPLETE) + + if (mr3 & MAC_INIT_COMPLETE) break; if (mr1 & MAC_INIT_COMPLETE && priv->bus_type == BUS_TYPE_PCCARD) break; } - + if (i == 0) { - printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name); + printk(KERN_ALERT "%s: MAC failed to initialise.\n", + priv->dev->name); return 0; } - + /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */ if ((mr3 & MAC_INIT_COMPLETE) && !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) { @@ -3398,9 +3422,9 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) return 0; } - atmel_copy_to_host(priv->dev, (unsigned char *)iface, + atmel_copy_to_host(priv->dev, (unsigned char *)iface, priv->host_info_base, sizeof(*iface)); - + iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos); iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size); iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos); @@ -3424,16 +3448,16 @@ static int probe_atmel_card(struct net_device *dev) { int rc = 0; struct atmel_private *priv = netdev_priv(dev); - + /* reset pccard */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); - + atmel_write16(dev, GCR, 0x0040); mdelay(500); - + if (atmel_read16(dev, MR2) == 0) { - /* No stored firmware so load a small stub which just + /* No stored firmware so load a small stub which just tells us the MAC address */ int i; priv->card_type = CARD_TYPE_EEPROM; @@ -3442,7 +3466,7 @@ static int probe_atmel_card(struct net_device *dev) atmel_set_gcr(dev, GCR_REMAP); atmel_clear_gcr(priv->dev, 0x0040); atmel_write16(dev, BSR, BSS_SRAM); - for (i = LOOP_RETRY_LIMIT; i; i--) + for (i = LOOP_RETRY_LIMIT; i; i--) if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE) break; if (i == 0) { @@ -3451,7 +3475,7 @@ static int probe_atmel_card(struct net_device *dev) atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6); /* got address, now squash it again until the network interface is opened */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); rc = 1; @@ -3459,7 +3483,7 @@ static int probe_atmel_card(struct net_device *dev) } else if (atmel_read16(dev, MR4) == 0) { /* Mac address easy in this case. */ priv->card_type = CARD_TYPE_PARALLEL_FLASH; - atmel_write16(dev, BSR, 1); + atmel_write16(dev, BSR, 1); atmel_copy_to_host(dev, dev->dev_addr, 0xc000, 6); atmel_write16(dev, BSR, 0x200); rc = 1; @@ -3469,16 +3493,16 @@ static int probe_atmel_card(struct net_device *dev) priv->card_type = CARD_TYPE_SPI_FLASH; if (atmel_wakeup_firmware(priv)) { atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6); - + /* got address, now squash it again until the network interface is opened */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); rc = 1; } } - + if (rc) { if (dev->dev_addr[0] == 0xFF) { u8 default_mac[] = {0x00,0x04, 0x25, 0x00, 0x00, 0x00}; @@ -3486,27 +3510,27 @@ static int probe_atmel_card(struct net_device *dev) memcpy(dev->dev_addr, default_mac, 6); } } - + return rc; } -static void build_wep_mib(struct atmel_private *priv) /* Move the encyption information on the MIB structure. This routine is for the pre-WPA firmware: later firmware has a different format MIB and a different routine. */ +static void build_wep_mib(struct atmel_private *priv) { struct { /* NB this is matched to the hardware, don't change. */ - u8 wep_is_on; + u8 wep_is_on; u8 default_key; /* 0..3 */ u8 reserved; u8 exclude_unencrypted; - + u32 WEPICV_error_count; u32 WEP_excluded_count; - + u8 wep_keys[MAX_ENCRYPTION_KEYS][13]; - u8 encryption_level; /* 0, 1, 2 */ - u8 reserved2[3]; + u8 encryption_level; /* 0, 1, 2 */ + u8 reserved2[3]; } mib; int i; @@ -3515,54 +3539,55 @@ static void build_wep_mib(struct atmel_private *priv) if (priv->wep_key_len[priv->default_key] > 5) mib.encryption_level = 2; else - mib.encryption_level = 1; + mib.encryption_level = 1; } else { mib.encryption_level = 0; } mib.default_key = priv->default_key; mib.exclude_unencrypted = priv->exclude_unencrypted; - - for(i = 0; i < MAX_ENCRYPTION_KEYS; i++) + + for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) memcpy(mib.wep_keys[i], priv->wep_keys[i], 13); - + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); } static void build_wpa_mib(struct atmel_private *priv) { - /* This is for the later (WPA enabled) firmware. */ + /* This is for the later (WPA enabled) firmware. */ struct { /* NB this is matched to the hardware, don't change. */ u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; u8 receiver_address[6]; - u8 wep_is_on; + u8 wep_is_on; u8 default_key; /* 0..3 */ u8 group_key; u8 exclude_unencrypted; u8 encryption_type; u8 reserved; - + u32 WEPICV_error_count; u32 WEP_excluded_count; - + u8 key_RSC[4][8]; } mib; - + int i; mib.wep_is_on = priv->wep_is_on; mib.exclude_unencrypted = priv->exclude_unencrypted; memcpy(mib.receiver_address, priv->CurrentBSSID, 6); - + /* zero all the keys before adding in valid ones. */ memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value)); - + if (priv->wep_is_on) { - /* There's a comment in the Atmel code to the effect that this is only valid - when still using WEP, it may need to be set to something to use WPA */ + /* There's a comment in the Atmel code to the effect that this + is only valid when still using WEP, it may need to be set to + something to use WPA */ memset(mib.key_RSC, 0, sizeof(mib.key_RSC)); - + mib.default_key = mib.group_key = 255; for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) { if (priv->wep_key_len[i] > 0) { @@ -3570,12 +3595,12 @@ static void build_wpa_mib(struct atmel_private *priv) if (i == priv->default_key) { mib.default_key = i; mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7; - mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite; } else { mib.group_key = i; priv->group_cipher_suite = priv->pairwise_cipher_suite; mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1; - mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite; } } } @@ -3583,47 +3608,47 @@ static void build_wpa_mib(struct atmel_private *priv) mib.default_key = mib.group_key != 255 ? mib.group_key : 0; if (mib.group_key == 255) mib.group_key = mib.default_key; - + } - + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); } - -static int reset_atmel_card(struct net_device *dev) + +static int reset_atmel_card(struct net_device *dev) { /* do everything necessary to wake up the hardware, including waiting for the lightning strike and throwing the knife switch.... - set all the Mib values which matter in the card to match + set all the Mib values which matter in the card to match their settings in the atmel_private structure. Some of these can be altered on the fly, but many (WEP, infrastucture or ad-hoc) can only be changed by tearing down the world and coming back through here. - This routine is also responsible for initialising some - hardware-specific fields in the atmel_private structure, + This routine is also responsible for initialising some + hardware-specific fields in the atmel_private structure, including a copy of the firmware's hostinfo stucture which is the route into the rest of the firmare datastructures. */ struct atmel_private *priv = netdev_priv(dev); u8 configuration; - + /* data to add to the firmware names, in priority order this implemenents firmware versioning */ - + static char *firmware_modifier[] = { "-wpa", "", NULL }; - + /* reset pccard */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(priv->dev, GCR, 0x0060); - + /* stop card , disable interrupts */ atmel_write16(priv->dev, GCR, 0x0040); - + if (priv->card_type == CARD_TYPE_EEPROM) { /* copy in firmware if needed */ const struct firmware *fw_entry = NULL; @@ -3636,13 +3661,13 @@ static int reset_atmel_card(struct net_device *dev) "%s: card type is unknown: assuming at76c502 firmware is OK.\n", dev->name); printk(KERN_INFO - "%s: if not, use the firmware= module parameter.\n", + "%s: if not, use the firmware= module parameter.\n", dev->name); strcpy(priv->firmware_id, "atmel_at76c502.bin"); } if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) { - printk(KERN_ALERT - "%s: firmware %s is missing, cannot continue.\n", + printk(KERN_ALERT + "%s: firmware %s is missing, cannot continue.\n", dev->name, priv->firmware_id); return 0; } @@ -3654,7 +3679,7 @@ static int reset_atmel_card(struct net_device *dev) while (fw_table[fw_index].fw_type != priv->firmware_type && fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) fw_index++; - + /* construct the actual firmware file name */ if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) { int i; @@ -3669,24 +3694,24 @@ static int reset_atmel_card(struct net_device *dev) } } if (!success) { - printk(KERN_ALERT - "%s: firmware %s is missing, cannot start.\n", + printk(KERN_ALERT + "%s: firmware %s is missing, cannot start.\n", dev->name, priv->firmware_id); priv->firmware_id[0] = '\0'; - return 0; + return 0; } } - + fw = fw_entry->data; len = fw_entry->size; } - + if (len <= 0x6000) { atmel_write16(priv->dev, BSR, BSS_IRAM); atmel_copy_to_card(priv->dev, 0, fw, len); atmel_set_gcr(priv->dev, GCR_REMAP); } else { - /* Remap */ + /* Remap */ atmel_set_gcr(priv->dev, GCR_REMAP); atmel_write16(priv->dev, BSR, BSS_IRAM); atmel_copy_to_card(priv->dev, 0, fw, 0x6000); @@ -3708,45 +3733,45 @@ static int reset_atmel_card(struct net_device *dev) the 3com broken-ness filter. */ priv->use_wpa = (priv->host_info.major_version == 4); priv->radio_on_broken = (priv->host_info.major_version == 5); - + /* unmask all irq sources */ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff); - + /* int Tx system and enable Tx */ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0); atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0); - priv->tx_desc_free = priv->host_info.tx_desc_count; - priv->tx_desc_head = 0; - priv->tx_desc_tail = 0; + priv->tx_desc_free = priv->host_info.tx_desc_count; + priv->tx_desc_head = 0; + priv->tx_desc_tail = 0; priv->tx_desc_previous = 0; priv->tx_free_mem = priv->host_info.tx_buff_size; - priv->tx_buff_head = 0; - priv->tx_buff_tail = 0; - - configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); - atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + priv->tx_buff_head = 0; + priv->tx_buff_tail = 0; + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), configuration | FUNC_CTRL_TxENABLE); /* init Rx system and enable */ priv->rx_desc_head = 0; - - configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); - atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), configuration | FUNC_CTRL_RxENABLE); - + if (!priv->radio_on_broken) { - if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == + if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == CMD_STATUS_REJECTED_RADIO_OFF) { - printk(KERN_INFO + printk(KERN_INFO "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n", dev->name); return 0; } } - + /* set up enough MIB values to run. */ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate); atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF); @@ -3755,7 +3780,7 @@ static int reset_atmel_card(struct net_device *dev) atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry); atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry); atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble); - atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS, + atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS, priv->dev->dev_addr, 6); atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); @@ -3766,42 +3791,44 @@ static int reset_atmel_card(struct net_device *dev) build_wpa_mib(priv); else build_wep_mib(priv); - + return 1; } -static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size) +static void atmel_send_command(struct atmel_private *priv, int command, + void *cmd, int cmd_size) { if (cmd) - atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET), + atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET), cmd, cmd_size); - + atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command); atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0); } - -static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size) + +static int atmel_send_command_wait(struct atmel_private *priv, int command, + void *cmd, int cmd_size) { int i, status; - + atmel_send_command(priv, command, cmd, cmd_size); - + for (i = 5000; i; i--) { status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); - if (status != CMD_STATUS_IDLE && + if (status != CMD_STATUS_IDLE && status != CMD_STATUS_IN_PROGRESS) break; udelay(20); } - + if (i == 0) { printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name); status = CMD_STATUS_HOST_ERROR; - } else { + } else { if (command != CMD_EnableRadio) status = CMD_STATUS_COMPLETE; } - + return status; } @@ -3827,7 +3854,8 @@ static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 dat atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1); } -static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data) +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, + u16 data) { struct get_set_mib m; m.type = type; @@ -3839,7 +3867,8 @@ static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 d atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2); } -static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len) { struct get_set_mib m; m.type = type; @@ -3848,23 +3877,24 @@ static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *dat if (data_len > MIB_MAX_DATA_BYTES) printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); - + memcpy(m.data, data, data_len); atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); } -static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len) { struct get_set_mib m; m.type = type; m.size = data_len; m.index = index; - + if (data_len > MIB_MAX_DATA_BYTES) printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); - + atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); - atmel_copy_to_host(priv->dev, data, + atmel_copy_to_host(priv->dev, data, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len); } @@ -3873,11 +3903,12 @@ static void atmel_writeAR(struct net_device *dev, u16 data) int i; outw(data, dev->base_addr + AR); /* Address register appears to need some convincing..... */ - for (i = 0; data != inw(dev->base_addr + AR) && i<10; i++) + for (i = 0; data != inw(dev->base_addr + AR) && i < 10; i++) outw(data, dev->base_addr + AR); } -static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len) +static void atmel_copy_to_card(struct net_device *dev, u16 dest, + unsigned char *src, u16 len) { int i; atmel_writeAR(dev, dest); @@ -3894,7 +3925,8 @@ static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char * atmel_write8(dev, DR, *src); } -static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len) +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, + u16 src, u16 len) { int i; atmel_writeAR(dev, src); @@ -3930,22 +3962,24 @@ static int atmel_lock_mac(struct atmel_private *priv) break; udelay(20); } - - if (!i) return 0; /* timed out */ - + + if (!i) + return 0; /* timed out */ + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1); if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) { atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - if (!j--) return 0; /* timed out */ + if (!j--) + return 0; /* timed out */ goto retry; } - + return 1; } static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write16(priv->dev, DR, data); /* card is little-endian */ atmel_write16(priv->dev, DR, data >> 16); } @@ -4017,9 +4051,9 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) serial output, since SO is normally high. But it does cause 8 clock cycles and thus 8 bits to be clocked in to the chip. See Atmel's SPI - controller (e.g. AT91M55800) timing and 4K + controller (e.g. AT91M55800) timing and 4K SPI EEPROM manuals */ - + .set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */ .set NVRAM_IMAGE, 0x02000200 .set NVRAM_LENGTH, 0x0200 @@ -4032,24 +4066,24 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) .set MR4, 0xC RESET_VECTOR: b RESET_HANDLER -UNDEF_VECTOR: +UNDEF_VECTOR: b HALT1 -SWI_VECTOR: +SWI_VECTOR: b HALT1 -IABORT_VECTOR: +IABORT_VECTOR: b HALT1 -DABORT_VECTOR: -RESERVED_VECTOR: +DABORT_VECTOR: +RESERVED_VECTOR: b HALT1 -IRQ_VECTOR: +IRQ_VECTOR: b HALT1 -FIQ_VECTOR: +FIQ_VECTOR: b HALT1 HALT1: b HALT1 RESET_HANDLER: mov r0, #CPSR_INITIAL msr CPSR_c, r0 /* This is probably unnecessary */ - + /* I'm guessing this is initializing clock generator electronics for SPI */ ldr r0, =SPI_CGEN_BASE mov r1, #0 @@ -4061,7 +4095,7 @@ RESET_HANDLER: str r1, [r0, #28] mov r1, #1 str r1, [r0, #8] - + ldr r0, =MRBASE mov r1, #0 strh r1, [r0, #MR1] @@ -4094,7 +4128,7 @@ GET_WHOLE_NVRAM: ldmia sp!, {lr} bx lr .endfunc - + .func Get_MAC_Addr, GET_MAC_ADDR GET_MAC_ADDR: stmdb sp!, {lr} @@ -4110,13 +4144,13 @@ GET_MAC_ADDR: .func Delay9, DELAY9 DELAY9: adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */ -DELAYLOOP: +DELAYLOOP: beq DELAY9_done subs r0, r0, #1 b DELAYLOOP -DELAY9_done: +DELAY9_done: bx lr -.endfunc +.endfunc .func SP_Init, SP_INIT SP_INIT: @@ -4145,26 +4179,26 @@ SP_INIT: ldr r0, [r0, #SP_RDR] bx lr .endfunc -.func NVRAM_Init, NVRAM_INIT +.func NVRAM_Init, NVRAM_INIT NVRAM_INIT: ldr r1, =SP_BASE ldr r0, [r1, #SP_RDR] mov r0, #NVRAM_CMD_RDSR str r0, [r1, #SP_TDR] -SP_loop1: +SP_loop1: ldr r0, [r1, #SP_SR] tst r0, #SP_TDRE beq SP_loop1 mov r0, #SPI_8CLOCKS - str r0, [r1, #SP_TDR] -SP_loop2: + str r0, [r1, #SP_TDR] +SP_loop2: ldr r0, [r1, #SP_SR] tst r0, #SP_TDRE beq SP_loop2 ldr r0, [r1, #SP_RDR] -SP_loop3: +SP_loop3: ldr r0, [r1, #SP_SR] tst r0, #SP_RDRF beq SP_loop3 @@ -4173,7 +4207,7 @@ SP_loop3: and r0, r0, #255 bx lr .endfunc - + .func NVRAM_Xfer, NVRAM_XFER /* r0 = dest address */ /* r1 = not used */ @@ -4185,11 +4219,11 @@ NVRAM_XFER: mov r4, r3 /* save r3 (length) */ mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */ and r0, r0, #8 - add r0, r0, #NVRAM_CMD_READ + add r0, r0, #NVRAM_CMD_READ ldr r1, =NVRAM_SCRATCH strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */ strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */ -_local1: +_local1: bl NVRAM_INIT tst r0, #NVRAM_SR_RDY bne _local1 @@ -4211,7 +4245,7 @@ NVRAM_XFER2: cmp r0, #0 bls _local2 ldr r5, =NVRAM_SCRATCH -_local4: +_local4: ldrb r6, [r5, r3] str r6, [r4, #SP_TDR] _local3: @@ -4225,7 +4259,7 @@ _local2: mov r3, #SPI_8CLOCKS str r3, [r4, #SP_TDR] ldr r0, [r4, #SP_RDR] -_local5: +_local5: ldr r0, [r4, #SP_SR] tst r0, #SP_RDRF beq _local5 @@ -4233,12 +4267,12 @@ _local5: mov r0, #0 cmp r2, #0 /* r2 is # of bytes to copy in */ bls _local6 -_local7: +_local7: ldr r5, [r4, #SP_SR] tst r5, #SP_TDRE beq _local7 str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */ -_local8: +_local8: ldr r5, [r4, #SP_SR] tst r5, #SP_RDRF beq _local8 diff --git a/drivers/net/wireless/hostap/Makefile b/drivers/net/wireless/hostap/Makefile index fc62235bfc24..353ccb93134b 100644 --- a/drivers/net/wireless/hostap/Makefile +++ b/drivers/net/wireless/hostap/Makefile @@ -1,3 +1,4 @@ +hostap-y := hostap_main.o obj-$(CONFIG_HOSTAP) += hostap.o obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap_main.c index 3d2ea61033be..3d2ea61033be 100644 --- a/drivers/net/wireless/hostap/hostap.c +++ b/drivers/net/wireless/hostap/hostap_main.c diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 77d2a21d4cd0..44cd3fcd1572 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -175,7 +175,7 @@ that only one external action is invoked at a time. #define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation" /* Debugging stuff */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */ #endif @@ -208,7 +208,7 @@ MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); static u32 ipw2100_debug_level = IPW_DL_NONE; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define IPW_DEBUG(level, message...) \ do { \ if (ipw2100_debug_level & (level)) { \ @@ -219,9 +219,9 @@ do { \ } while (0) #else #define IPW_DEBUG(level, message...) do {} while (0) -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static const char *command_types[] = { "undefined", "unused", /* HOST_ATTENTION */ @@ -2081,7 +2081,7 @@ static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) priv->status &= ~STATUS_SCANNING; } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define IPW2100_HANDLER(v, f) { v, f, # v } struct ipw2100_status_indicator { int status; @@ -2094,7 +2094,7 @@ struct ipw2100_status_indicator { int status; void (*cb) (struct ipw2100_priv * priv, u32 status); }; -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) { @@ -2149,7 +2149,7 @@ static void isr_status_change(struct ipw2100_priv *priv, int status) static void isr_rx_complete_command(struct ipw2100_priv *priv, struct ipw2100_cmd_header *cmd) { -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { IPW_DEBUG_HC("Command completed '%s (%d)'\n", command_types[cmd->host_command_reg], @@ -2167,7 +2167,7 @@ static void isr_rx_complete_command(struct ipw2100_priv *priv, wake_up_interruptible(&priv->wait_command_queue); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static const char *frame_types[] = { "COMMAND_STATUS_VAL", "STATUS_CHANGE_VAL", @@ -2290,7 +2290,7 @@ static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) { -#ifdef CONFIG_IPW_DEBUG_C3 +#ifdef CONFIG_IPW2100_DEBUG_C3 struct ipw2100_status *status = &priv->status_queue.drv[i]; u32 match, reg; int j; @@ -2312,7 +2312,7 @@ static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) } #endif -#ifdef CONFIG_IPW_DEBUG_C3 +#ifdef CONFIG_IPW2100_DEBUG_C3 /* Halt the fimrware so we can get a good image */ write_register(priv->net_dev, IPW_REG_RESET_REG, IPW_AUX_HOST_RESET_REG_STOP_MASTER); @@ -2716,7 +2716,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) list_del(element); DEC_STAT(&priv->fw_pend_stat); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG { int i = txq->oldest; IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, @@ -2782,7 +2782,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) "something else: ids %d=%d.\n", priv->net_dev->name, txq->oldest, packet->index); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (packet->info.c_struct.cmd->host_command_reg < sizeof(command_types) / sizeof(*command_types)) IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n", @@ -2975,7 +2975,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n", packet->index, tbd->host_addr, tbd->buf_length); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (packet->info.d_struct.txb->nr_frags > 1) IPW_DEBUG_FRAG("fragment Tx: %d frames\n", packet->info.d_struct.txb->nr_frags); @@ -3827,7 +3827,7 @@ static ssize_t show_stats(struct device *d, struct device_attribute *attr, priv->rx_interrupts, priv->inta_other); out += sprintf(out, "firmware resets: %d\n", priv->resets); out += sprintf(out, "firmware hangs: %d\n", priv->hangs); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG out += sprintf(out, "packet mismatch image: %s\n", priv->snapshot[0] ? "YES" : "NO"); #endif @@ -3982,7 +3982,7 @@ static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr, static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static ssize_t show_debug_level(struct device_driver *d, char *buf) { return sprintf(buf, "0x%08X\n", ipw2100_debug_level); @@ -4011,7 +4011,7 @@ static ssize_t store_debug_level(struct device_driver *d, static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level, store_debug_level); -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ static ssize_t show_fatal_error(struct device *d, struct device_attribute *attr, char *buf) @@ -4937,7 +4937,7 @@ static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid, }; int err; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (bssid != NULL) IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n", bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], @@ -6858,7 +6858,7 @@ static int __init ipw2100_init(void) ret = pci_module_init(&ipw2100_pci_driver); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG ipw2100_debug_level = debug; driver_create_file(&ipw2100_pci_driver.driver, &driver_attr_debug_level); @@ -6873,7 +6873,7 @@ static int __init ipw2100_init(void) static void __exit ipw2100_exit(void) { /* FIXME: IPG: check that we have no instances of the devices open */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG driver_remove_file(&ipw2100_pci_driver.driver, &driver_attr_debug_level); #endif @@ -8558,7 +8558,7 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) quality = min(beacon_qual, min(tx_qual, rssi_qual)); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (beacon_qual == quality) IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); else if (tx_qual == quality) diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 7c65b10bb164..f6c51441fa87 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -73,7 +73,7 @@ struct ipw2100_rx_packet; * you simply need to add your entry to the ipw2100_debug_levels array. * * If you do not see debug_level in /proc/net/ipw2100 then you do not have - * CONFIG_IPW_DEBUG defined in your kernel configuration + * CONFIG_IPW2100_DEBUG defined in your kernel configuration * */ diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 5e7c7e944c9d..cdfe50207757 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -462,7 +462,7 @@ static inline void ipw_disable_interrupts(struct ipw_priv *priv) ipw_write32(priv, IPW_INTA_MASK_R, ~IPW_INTA_MASK_ALL); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static char *ipw_error_desc(u32 val) { switch (val) { @@ -1235,7 +1235,7 @@ static ssize_t store_scan_age(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { struct ipw_priv *priv = dev_get_drvdata(d); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG struct net_device *dev = priv->net_dev; #endif char buffer[] = "00000000"; @@ -1754,7 +1754,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) IPW_ERROR("Firmware error detected. Restarting.\n"); if (priv->error) { IPW_ERROR("Sysfs 'error' log already exists.\n"); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (ipw_debug_level & IPW_DL_FW_ERRORS) { struct ipw_fw_error *error = ipw_alloc_error_log(priv); @@ -1770,7 +1770,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) else IPW_ERROR("Error allocating sysfs 'error' " "log.\n"); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (ipw_debug_level & IPW_DL_FW_ERRORS) ipw_dump_error_log(priv, priv->error); #endif @@ -3778,7 +3778,7 @@ static const struct ipw_status_code ipw_status_codes[] = { {0x2E, "Cipher suite is rejected per security policy"}, }; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static const char *ipw_get_status_code(u16 status) { int i; @@ -4250,7 +4250,7 @@ static inline void ipw_rx_notification(struct ipw_priv *priv, if (priv-> status & (STATUS_ASSOCIATED | STATUS_AUTH)) { -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG struct notif_authenticate *auth = ¬if->u.auth; IPW_DEBUG(IPW_DL_NOTIF | @@ -4944,12 +4944,11 @@ static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv) struct ipw_rx_queue *rxq; int i; - rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL); + rxq = kzalloc(sizeof(*rxq), GFP_KERNEL); if (unlikely(!rxq)) { IPW_ERROR("memory allocation failed\n"); return NULL; } - memset(rxq, 0, sizeof(*rxq)); spin_lock_init(&rxq->lock); INIT_LIST_HEAD(&rxq->rx_free); INIT_LIST_HEAD(&rxq->rx_used); @@ -5828,7 +5827,7 @@ static void ipw_bg_adhoc_check(void *data) up(&priv->sem); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static void ipw_debug_config(struct ipw_priv *priv) { IPW_DEBUG_INFO("Scan completed, no valid APs matched " @@ -7456,8 +7455,7 @@ static void ipw_handle_data_packet(struct ipw_priv *priv, /* HW decrypt will not clear the WEP bit, MIC, PN, etc. */ hdr = (struct ieee80211_hdr_4addr *)rxb->skb->data; if (priv->ieee->iw_mode != IW_MODE_MONITOR && - ((is_multicast_ether_addr(hdr->addr1) || - is_broadcast_ether_addr(hdr->addr1)) ? + (is_multicast_ether_addr(hdr->addr1) ? !priv->ieee->host_mc_decrypt : !priv->ieee->host_decrypt)) ipw_rebuild_decrypted_skb(priv, rxb->skb); @@ -7648,8 +7646,7 @@ static inline int is_network_packet(struct ipw_priv *priv, return 0; /* {broad,multi}cast packets to our BSSID go through */ - if (is_multicast_ether_addr(header->addr1) || - is_broadcast_ether_addr(header->addr1)) + if (is_multicast_ether_addr(header->addr1)) return !memcmp(header->addr3, priv->bssid, ETH_ALEN); /* packets to our adapter go through */ @@ -7662,8 +7659,7 @@ static inline int is_network_packet(struct ipw_priv *priv, return 0; /* {broad,multi}cast packets to our BSS go through */ - if (is_multicast_ether_addr(header->addr1) || - is_broadcast_ether_addr(header->addr1)) + if (is_multicast_ether_addr(header->addr1)) return !memcmp(header->addr2, priv->bssid, ETH_ALEN); /* packets to our adapter go through */ @@ -7815,7 +7811,7 @@ static void ipw_rx(struct ipw_priv *priv) while (i != r) { rxb = priv->rxq->queue[i]; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (unlikely(rxb == NULL)) { printk(KERN_CRIT "Queue not allocated!\n"); break; @@ -9657,8 +9653,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: hdr_len = IEEE80211_3ADDR_LEN; - unicast = !(is_multicast_ether_addr(hdr->addr1) || - is_broadcast_ether_addr(hdr->addr1)); + unicast = !is_multicast_ether_addr(hdr->addr1); id = ipw_find_station(priv, hdr->addr1); if (id == IPW_INVALID_STATION) { id = ipw_add_station(priv, hdr->addr1); @@ -9673,8 +9668,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, case IW_MODE_INFRA: default: - unicast = !(is_multicast_ether_addr(hdr->addr3) || - is_broadcast_ether_addr(hdr->addr3)); + unicast = !is_multicast_ether_addr(hdr->addr3); hdr_len = IEEE80211_3ADDR_LEN; id = 0; break; @@ -10956,7 +10950,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) priv->net_dev = net_dev; priv->pci_dev = pdev; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG ipw_debug_level = debug; #endif spin_lock_init(&priv->lock); diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index 1c98db0652c9..e65620a4d79e 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1301,14 +1301,14 @@ struct ipw_priv { /* debug macros */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG #define IPW_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) #else #define IPW_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2200_DEBUG */ /* * To use the debug system; @@ -1332,7 +1332,7 @@ do { if (ipw_debug_level & (level)) \ * you simply need to add your entry to the ipw_debug_levels array. * * If you do not see debug_level in /proc/net/ipw then you do not have - * CONFIG_IPW_DEBUG defined in your kernel configuration + * CONFIG_IPW2200_DEBUG defined in your kernel configuration * */ |