diff options
Diffstat (limited to 'drivers/parisc/lba_pci.c')
| -rw-r--r-- | drivers/parisc/lba_pci.c | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 98f03686a710..ba6769934c77 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -100,71 +100,6 @@ #define MODULE_NAME "LBA" -#define LBA_FUNC_ID 0x0000 /* function id */ -#define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */ -#define LBA_CAPABLE 0x0030 /* capabilities register */ - -#define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */ -#define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */ - -#define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */ -#define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */ -#define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */ - -#define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */ -#define LBA_ARB_PRI 0x0088 /* firmware sets this. */ -#define LBA_ARB_MODE 0x0090 /* firmware sets this. */ -#define LBA_ARB_MTLT 0x0098 /* firmware sets this. */ - -#define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */ - -#define LBA_STAT_CTL 0x0108 /* Status & Control */ -#define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */ -#define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */ -#define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */ -#define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */ - -#define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */ -#define LBA_LMMIO_MASK 0x0208 - -#define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */ -#define LBA_GMMIO_MASK 0x0218 - -#define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */ -#define LBA_WLMMIO_MASK 0x0228 - -#define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */ -#define LBA_WGMMIO_MASK 0x0238 - -#define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */ -#define LBA_IOS_MASK 0x0248 - -#define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */ -#define LBA_ELMMIO_MASK 0x0258 - -#define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */ -#define LBA_EIOS_MASK 0x0268 - -#define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */ -#define LBA_DMA_CTL 0x0278 /* firmware sets this */ - -#define LBA_IBASE 0x0300 /* SBA DMA support */ -#define LBA_IMASK 0x0308 - -/* FIXME: ignore DMA Hint stuff until we can measure performance */ -#define LBA_HINT_CFG 0x0310 -#define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */ - -#define LBA_BUS_MODE 0x0620 - -/* ERROR regs are needed for config cycle kluges */ -#define LBA_ERROR_CONFIG 0x0680 -#define LBA_SMART_MODE 0x20 -#define LBA_ERROR_STATUS 0x0688 -#define LBA_ROPE_CTL 0x06A0 - -#define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */ - /* non-postable I/O port space, densely packed */ #define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL) static void __iomem *astro_iop_base __read_mostly; |