diff options
Diffstat (limited to 'drivers/parisc/sba_iommu.c')
-rw-r--r-- | drivers/parisc/sba_iommu.c | 81 |
1 files changed, 44 insertions, 37 deletions
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f81d59d..e5999c4cedc8 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1206,30 +1206,48 @@ sba_alloc_pdir(unsigned int pdir_size) return (void *) pdir_base; } -static struct device *next_device(struct klist_iter *i) +struct ibase_data_struct { + struct ioc *ioc; + int ioc_num; +}; + +static int setup_ibase_imask_callback(struct device *dev, void *data) { - struct klist_node * n = klist_next(i); - return n ? container_of(n, struct device, knode_parent) : NULL; + /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ + extern void lba_set_iregs(struct parisc_device *, u32, u32); + struct parisc_device *lba = to_parisc_device(dev); + struct ibase_data_struct *ibd = data; + int rope_num = (lba->hpa.start >> 13) & 0xf; + if (rope_num >> 3 == ibd->ioc_num) + lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask); + return 0; } /* setup Mercury or Elroy IBASE/IMASK registers. */ static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { - /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ - extern void lba_set_iregs(struct parisc_device *, u32, u32); - struct device *dev; - struct klist_iter i; - - klist_iter_init(&sba->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *lba = to_parisc_device(dev); - int rope_num = (lba->hpa.start >> 13) & 0xf; - if (rope_num >> 3 == ioc_num) - lba_set_iregs(lba, ioc->ibase, ioc->imask); - } - klist_iter_exit(&i); + struct ibase_data_struct ibase_data = { + .ioc = ioc, + .ioc_num = ioc_num, + }; + + device_for_each_child(&sba->dev, &ibase_data, + setup_ibase_imask_callback); +} + +#ifdef SBA_AGP_SUPPORT +static int +sba_ioc_find_quicksilver(struct device *dev, void *data) +{ + int *agp_found = data; + struct parisc_device *lba = to_parisc_device(dev); + + if (IS_QUICKSILVER(lba)) + *agp_found = 1; + return 0; } +#endif static void sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) @@ -1332,9 +1350,6 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); #ifdef SBA_AGP_SUPPORT -{ - struct klist_iter i; - struct device *dev = NULL; /* ** If an AGP device is present, only use half of the IOV space @@ -1344,13 +1359,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) ** We program the next pdir index after we stop w/ a key for ** the GART code to handshake on. */ - klist_iter_init(&sba->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *lba = to_parisc_device(dev); - if (IS_QUICKSILVER(lba)) - agp_found = 1; - } - klist_iter_exit(&i); + device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver); if (agp_found && sba_reserve_agpgart) { printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n", @@ -1358,9 +1367,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) ioc->pdir_size /= 2; ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE; } -} #endif /*SBA_AGP_SUPPORT*/ - } static void |