diff options
Diffstat (limited to 'drivers/parport')
| -rw-r--r-- | drivers/parport/probe.c | 193 |
1 files changed, 130 insertions, 63 deletions
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c index 4b48b31ec235..5c29e8222211 100644 --- a/drivers/parport/probe.c +++ b/drivers/parport/probe.c @@ -128,8 +128,131 @@ static void parse_data(struct parport *port, int device, char *str) kfree(txt); } +/* Read up to count-1 bytes of device id. Terminate buffer with + * '\0'. Buffer begins with two Device ID length bytes as given by + * device. */ +static ssize_t parport_read_device_id (struct parport *port, char *buffer, + size_t count) +{ + unsigned char length[2]; + unsigned lelen, belen; + size_t idlens[4]; + unsigned numidlens; + unsigned current_idlen; + ssize_t retval; + size_t len; + + /* First two bytes are MSB,LSB of inclusive length. */ + retval = parport_read (port, length, 2); + + if (retval < 0) + return retval; + if (retval != 2) + return -EIO; + + if (count < 2) + return 0; + memcpy(buffer, length, 2); + len = 2; + + /* Some devices wrongly send LE length, and some send it two + * bytes short. Construct a sorted array of lengths to try. */ + belen = (length[0] << 8) + length[1]; + lelen = (length[1] << 8) + length[0]; + idlens[0] = min(belen, lelen); + idlens[1] = idlens[0]+2; + if (belen != lelen) { + int off = 2; + /* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */ + if (idlens[0] <= 2) + off = 0; + idlens[off] = max(belen, lelen); + idlens[off+1] = idlens[off]+2; + numidlens = off+2; + } + else { + /* Some devices don't truly implement Device ID, but + * just return constant nibble forever. This catches + * also those cases. */ + if (idlens[0] == 0 || idlens[0] > 0xFFF) { + printk (KERN_DEBUG "%s: reported broken Device ID" + " length of %#zX bytes\n", + port->name, idlens[0]); + return -EIO; + } + numidlens = 2; + } + + /* Try to respect the given ID length despite all the bugs in + * the ID length. Read according to shortest possible ID + * first. */ + for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) { + size_t idlen = idlens[current_idlen]; + if (idlen+1 >= count) + break; + + retval = parport_read (port, buffer+len, idlen-len); + + if (retval < 0) + return retval; + len += retval; + + if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) { + if (belen != len) { + printk (KERN_DEBUG "%s: Device ID was %d bytes" + " while device told it would be %d" + " bytes\n", + port->name, len, belen); + } + goto done; + } + + /* This might end reading the Device ID too + * soon. Hopefully the needed fields were already in + * the first 256 bytes or so that we must have read so + * far. */ + if (buffer[len-1] == ';') { + printk (KERN_DEBUG "%s: Device ID reading stopped" + " before device told data not available. " + "Current idlen %d of %d, len bytes %02X %02X\n", + port->name, current_idlen, numidlens, + length[0], length[1]); + goto done; + } + } + if (current_idlen < numidlens) { + /* Buffer not large enough, read to end of buffer. */ + size_t idlen, len2; + if (len+1 < count) { + retval = parport_read (port, buffer+len, count-len-1); + if (retval < 0) + return retval; + len += retval; + } + /* Read the whole ID since some devices would not + * otherwise give back the Device ID from beginning + * next time when asked. */ + idlen = idlens[current_idlen]; + len2 = len; + while(len2 < idlen && retval > 0) { + char tmp[4]; + retval = parport_read (port, tmp, + min(sizeof tmp, idlen-len2)); + if (retval < 0) + return retval; + len2 += retval; + } + } + /* In addition, there are broken devices out there that don't + even finish off with a semi-colon. We do not need to care + about those at this time. */ + done: + buffer[len] = '\0'; + return len; +} + /* Get Std 1284 Device ID. */ -ssize_t parport_device_id (int devnum, char *buffer, size_t len) +ssize_t parport_device_id (int devnum, char *buffer, size_t count) { ssize_t retval = -ENXIO; struct pardevice *dev = parport_open (devnum, "Device ID probe", @@ -139,76 +262,20 @@ ssize_t parport_device_id (int devnum, char *buffer, size_t len) parport_claim_or_block (dev); - /* Negotiate to compatibility mode, and then to device ID mode. - * (This is in case we are already in device ID mode.) */ + /* Negotiate to compatibility mode, and then to device ID + * mode. (This so that we start form beginning of device ID if + * already in device ID mode.) */ parport_negotiate (dev->port, IEEE1284_MODE_COMPAT); retval = parport_negotiate (dev->port, IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID); if (!retval) { - int idlen; - unsigned char length[2]; - - /* First two bytes are MSB,LSB of inclusive length. */ - retval = parport_read (dev->port, length, 2); - - if (retval != 2) goto end_id; - - idlen = (length[0] << 8) + length[1] - 2; - /* - * Check if the caller-allocated buffer is large enough - * otherwise bail out or there will be an at least off by one. - */ - if (idlen + 1 < len) - len = idlen; - else { - retval = -EINVAL; - goto out; - } - retval = parport_read (dev->port, buffer, len); - - if (retval != len) - printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n", - dev->port->name, retval, - len); - - /* Some printer manufacturers mistakenly believe that - the length field is supposed to be _exclusive_. - In addition, there are broken devices out there - that don't even finish off with a semi-colon. */ - if (buffer[len - 1] != ';') { - ssize_t diff; - diff = parport_read (dev->port, buffer + len, 2); - retval += diff; - - if (diff) - printk (KERN_DEBUG - "%s: device reported incorrect " - "length field (%d, should be %Zd)\n", - dev->port->name, idlen, retval); - else { - /* One semi-colon short of a device ID. */ - buffer[len++] = ';'; - printk (KERN_DEBUG "%s: faking semi-colon\n", - dev->port->name); - - /* If we get here, I don't think we - need to worry about the possible - standard violation of having read - more than we were told to. The - device is non-compliant anyhow. */ - } - } - - end_id: - buffer[len] = '\0'; + retval = parport_read_device_id (dev->port, buffer, count); parport_negotiate (dev->port, IEEE1284_MODE_COMPAT); + if (retval > 2) + parse_data (dev->port, dev->daisy, buffer+2); } - if (retval > 2) - parse_data (dev->port, dev->daisy, buffer); - -out: parport_release (dev); parport_close (dev); return retval; |