diff options
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_pci.c')
| -rw-r--r-- | drivers/pci/hotplug/cpqphp_pci.c | 599 |
1 files changed, 297 insertions, 302 deletions
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 6c0ed0fcb8ee..6173b9a4544e 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -37,7 +37,6 @@ #include "../pci.h" #include "cpqphp.h" #include "cpqphp_nvram.h" -#include <asm/pci_x86.h> u8 cpqhp_nic_irq; @@ -82,14 +81,14 @@ static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iom } -int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) +int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) { unsigned char bus; struct pci_bus *child; int num; if (func->pci_dev == NULL) - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function)); /* No pci device, we need to create it then */ if (func->pci_dev == NULL) { @@ -99,7 +98,7 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) if (num) pci_bus_add_devices(ctrl->pci_dev->bus); - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); + func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function)); if (func->pci_dev == NULL) { dbg("ERROR: pci_dev still null\n"); return 0; @@ -112,20 +111,24 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) pci_do_scan_bus(child); } + pci_dev_put(func->pci_dev); + return 0; } -int cpqhp_unconfigure_device(struct pci_func* func) +int cpqhp_unconfigure_device(struct pci_func* func) { int j; - + dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function); for (j=0; j<8 ; j++) { - struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j)); - if (temp) + struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j)); + if (temp) { + pci_dev_put(temp); pci_remove_bus_device(temp); + } } return 0; } @@ -178,32 +181,22 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) if (!rc) return !rc; - // set the Edge Level Control Register (ELCR) + /* set the Edge Level Control Register (ELCR) */ temp_word = inb(0x4d0); temp_word |= inb(0x4d1) << 8; temp_word |= 0x01 << irq_num; - // This should only be for x86 as it sets the Edge Level Control Register - outb((u8) (temp_word & 0xFF), 0x4d0); - outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1); - rc = 0; - } + /* This should only be for x86 as it sets the Edge Level + * Control Register + */ + outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word & + 0xFF00) >> 8), 0x4d1); rc = 0; } return rc; } -/* - * WTF??? This function isn't in the code, yet a function calls it, but the - * compiler optimizes it away? strange. Here as a placeholder to keep the - * compiler happy. - */ -static int PCI_ScanBusNonBridge (u8 bus, u8 device) -{ - return 0; -} - static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num) { u16 tdevice; @@ -213,11 +206,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev ctrl->pci_bus->number = bus_num; for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. Not a bridge ? + /* Yep we got one. Not a bridge ? */ if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) { *dev_num = tdevice; dbg("found it !\n"); @@ -225,16 +218,16 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev } } for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. bridge ? + /* Yep we got one. bridge ? */ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus); + /* XXX: no recursion, wtf? */ dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice); - if (PCI_ScanBusNonBridge(tbus, tdevice) == 0) - return 0; + return 0; } } @@ -244,39 +237,23 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge) { - struct irq_routing_table *PCIIRQRoutingInfoLength; - long len; - long loop; + int loop, len; u32 work; - u8 tbus, tdevice, tslot; - PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table(); - if (!PCIIRQRoutingInfoLength) - return -1; - - len = (PCIIRQRoutingInfoLength->size - - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry - if (len == 0) { - kfree(PCIIRQRoutingInfoLength ); - return -1; - } - + len = cpqhp_routing_table_length(); for (loop = 0; loop < len; ++loop) { - tbus = PCIIRQRoutingInfoLength->slots[loop].bus; - tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn; - tslot = PCIIRQRoutingInfoLength->slots[loop].slot; + tbus = cpqhp_routing_table->slots[loop].bus; + tdevice = cpqhp_routing_table->slots[loop].devfn; + tslot = cpqhp_routing_table->slots[loop].slot; if (tslot == slot) { *bus_num = tbus; *dev_num = tdevice; ctrl->pci_bus->number = tbus; pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work); - if (!nobridge || (work == 0xffffffff)) { - kfree(PCIIRQRoutingInfoLength ); + if (!nobridge || (work == 0xffffffff)) return 0; - } dbg("bus_num %d devfn %d\n", *bus_num, *dev_num); pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work); @@ -287,28 +264,26 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num dbg("Scan bus for Non Bridge: bus %d\n", tbus); if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) { *bus_num = tbus; - kfree(PCIIRQRoutingInfoLength ); return 0; } - } else { - kfree(PCIIRQRoutingInfoLength ); + } else return 0; - } - } } - kfree(PCIIRQRoutingInfoLength ); return -1; } int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot) { - return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed) + /* plain (bridges allowed) */ + return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); } -/* More PCI configuration routines; this time centered around hotplug controller */ +/* More PCI configuration routines; this time centered around hotplug + * controller + */ /* @@ -339,12 +314,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) int stop_it; int index; - // Decide which slots are supported + /* Decide which slots are supported */ if (is_hot_plug) { - //********************************* - // is_hot_plug is the slot mask - //********************************* + /* + * is_hot_plug is the slot mask + */ FirstSupported = is_hot_plug >> 4; LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1; } else { @@ -352,123 +327,127 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) LastSupported = 0x1F; } - // Save PCI configuration space for all devices in supported slots + /* Save PCI configuration space for all devices in supported slots */ ctrl->pci_bus->number = busnumber; for (device = FirstSupported; device <= LastSupported; device++) { ID = 0xFFFFFFFF; - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + + if (ID == 0xFFFFFFFF) { + if (is_hot_plug) { + /* Setup slot structure with entry for empty + * slot + */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; - if (ID != 0xFFFFFFFF) { // device in slot - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); - if (rc) - return rc; + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = 0; + new_slot->is_a_board = 0; + new_slot->presence_save = 0; + new_slot->switch_save = 0; + } + continue; + } - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); + if (rc) + return rc; - // If multi-function device, set max_functions to 8 - if (header_type & 0x80) - max_functions = 8; - else - max_functions = 1; + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; - function = 0; + /* If multi-function device, set max_functions to 8 */ + if (header_type & 0x80) + max_functions = 8; + else + max_functions = 1; - do { - DevError = 0; + function = 0; - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge - // Recurse the subordinate bus - // get the subordinate bus number - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); - if (rc) { + do { + DevError = 0; + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus + * get the subordinate bus number + */ + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); + if (rc) { + return rc; + } else { + sub_bus = (int) secondary_bus; + + /* Save secondary bus cfg spc + * with this recursive call. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) return rc; - } else { - sub_bus = (int) secondary_bus; - - // Save secondary bus cfg spc - // with this recursive call. - rc = cpqhp_save_config(ctrl, sub_bus, 0); - if (rc) - return rc; - ctrl->pci_bus->number = busnumber; - } + ctrl->pci_bus->number = busnumber; } + } - index = 0; + index = 0; + new_slot = cpqhp_slot_find(busnumber, device, index++); + while (new_slot && + (new_slot->function != (u8) function)) new_slot = cpqhp_slot_find(busnumber, device, index++); - while (new_slot && - (new_slot->function != (u8) function)) - new_slot = cpqhp_slot_find(busnumber, device, index++); - if (!new_slot) { - // Setup slot structure. - new_slot = cpqhp_slot_create(busnumber); - - if (new_slot == NULL) - return(1); - } - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = (u8) function; - new_slot->is_a_board = 1; - new_slot->switch_save = 0x10; - // In case of unsupported board - new_slot->status = DevError; - new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); - - for (cloop = 0; cloop < 0x20; cloop++) { - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - if (rc) - return rc; - } + if (!new_slot) { + /* Setup slot structure. */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; + } - function++; + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = (u8) function; + new_slot->is_a_board = 1; + new_slot->switch_save = 0x10; + /* In case of unsupported board */ + new_slot->status = DevError; + new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); - stop_it = 0; + for (cloop = 0; cloop < 0x20; cloop++) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); + if (rc) + return rc; + } - // this loop skips to the next present function - // reading in Class Code and Header type. + pci_dev_put(new_slot->pci_dev); - while ((function < max_functions)&&(!stop_it)) { - rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); - if (ID == 0xFFFFFFFF) { // nothing there. - function++; - } else { // Something there - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); - if (rc) - return rc; + function++; - rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; + stop_it = 0; - stop_it++; - } + /* this loop skips to the next present function + * reading in Class Code and Header type. + */ + while ((function < max_functions) && (!stop_it)) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); + if (ID == 0xFFFFFFFF) { + function++; + continue; } + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); + if (rc) + return rc; - } while (function < max_functions); - } // End of IF (device in slot?) - else if (is_hot_plug) { - // Setup slot structure with entry for empty slot - new_slot = cpqhp_slot_create(busnumber); + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; - if (new_slot == NULL) { - return(1); + stop_it++; } - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = 0; - new_slot->is_a_board = 0; - new_slot->presence_save = 0; - new_slot->switch_save = 0; - } - } // End of FOR loop + } while (function < max_functions); + } /* End of FOR loop */ - return(0); + return 0; } @@ -489,7 +468,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) u8 secondary_bus; int sub_bus; int max_functions; - int function; + int function = 0; int cloop = 0; int stop_it; @@ -498,63 +477,58 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) ctrl->pci_bus->number = new_slot->bus; pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID); - if (ID != 0xFFFFFFFF) { // device in slot - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); - - if (header_type & 0x80) // Multi-function device - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Recurse the subordinate bus - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); + if (ID == 0xFFFFFFFF) + return 2; - sub_bus = (int) secondary_bus; + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); - // Save the config headers for the secondary bus. - rc = cpqhp_save_config(ctrl, sub_bus, 0); - if (rc) - return(rc); - ctrl->pci_bus->number = new_slot->bus; + if (header_type & 0x80) /* Multi-function device */ + max_functions = 8; + else + max_functions = 1; - } // End of IF + while (function < max_functions) { + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus */ + pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); - new_slot->status = 0; + sub_bus = (int) secondary_bus; - for (cloop = 0; cloop < 0x20; cloop++) { - pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - } + /* Save the config headers for the secondary + * bus. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) + return(rc); + ctrl->pci_bus->number = new_slot->bus; - function++; + } - stop_it = 0; + new_slot->status = 0; - // this loop skips to the next present function - // reading in the Class Code and the Header type. + for (cloop = 0; cloop < 0x20; cloop++) + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); + function++; - if (ID == 0xFFFFFFFF) { // nothing there. - function++; - } else { // Something there - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); + stop_it = 0; - pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); + /* this loop skips to the next present function + * reading in the Class Code and the Header type. + */ + while ((function < max_functions) && (!stop_it)) { + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); - stop_it++; - } + if (ID == 0xFFFFFFFF) + function++; + else { + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); + stop_it++; } + } - } while (function < max_functions); - } // End of IF (device in slot?) - else { - return 2; } return 0; @@ -590,11 +564,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - // PCI-PCI Bridge pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -610,23 +583,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) } pci_bus->number = func->bus; - //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together - // Figure out IO and memory base lengths + /* FIXME: this loop is duplicated in the non-bridge + * case. The two could be rolled together Figure out + * IO and memory base lengths + */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -637,32 +614,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop + } /* End of base register loop */ - - } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge - // Figure out IO and memory base lengths + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // base = amount of IO space requested + /* IO base + * base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base - // base = amount of memory space requested + /* memory base + * base = amount of memory + * space requested + */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -673,16 +654,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop + } /* End of base register loop */ - } else { // Some other unknown header type + } else { /* Some other unknown header type */ } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -728,18 +709,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Save the command register + /* Save the command register */ pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); - // disable card + /* disable card */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Clear Bridge Control Register + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Clear Bridge Control Register */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); @@ -755,7 +736,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) bus_node->next = func->bus_head; func->bus_head = bus_node; - // Save IO base and Limit registers + /* Save IO base and Limit registers */ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base); pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length); @@ -771,7 +752,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->io_head = io_node; } - // Save memory base and Limit registers + /* Save memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); @@ -787,7 +768,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->mem_head = mem_node; } - // Save prefetchable memory base and Limit registers + /* Save prefetchable memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); @@ -802,7 +783,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) p_mem_node->next = func->p_mem_head; func->p_mem_head = p_mem_node; } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base); @@ -812,11 +793,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -834,7 +818,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -851,7 +835,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -868,9 +852,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else if ((header_type & 0x7F) == 0x00) { // Standard header - // Figure out IO and memory base lengths + } /* End of base register loop */ + /* Standard header */ + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); @@ -880,11 +865,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -901,7 +889,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -918,7 +906,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -935,15 +923,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else { // Some other unknown header type + } /* End of base register loop */ } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } - return(0); + return 0; } @@ -975,16 +962,16 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Start at the top of config space so that the control - // registers are programmed last - for (cloop = 0x3C; cloop > 0; cloop -= 4) { + /* Start at the top of config space so that the control + * registers are programmed last + */ + for (cloop = 0x3C; cloop > 0; cloop -= 4) pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]); - } pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - // If this is a bridge device, restore subordinate devices - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge + /* If this is a bridge device, restore subordinate devices */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -1000,8 +987,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) } } else { - // Check all the base Address Registers to make sure - // they are the same. If not, the board is different. + /* Check all the base Address Registers to make sure + * they are the same. If not, the board is different. + */ for (cloop = 16; cloop < 40; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp); @@ -1058,27 +1046,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register); - // No adapter present + /* No adapter present */ if (temp_register == 0xFFFFFFFF) return(NO_ADAPTER_PRESENT); if (temp_register != func->config_space[0]) return(ADAPTER_NOT_SAME); - // Check for same revision number and class code + /* Check for same revision number and class code */ pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register); - // Adapter not the same + /* Adapter not the same */ if (temp_register != func->config_space[0x08 >> 2]) return(ADAPTER_NOT_SAME); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // In order to continue checking, we must program the - // bus registers in the bridge to respond to accesses - // for it's subordinate bus(es) + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* In order to continue checking, we must program the + * bus registers in the bridge to respond to accesses + * for its subordinate bus(es) + */ temp_register = func->config_space[0x18 >> 2]; pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register); @@ -1096,35 +1085,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) } } - // Check to see if it is a standard config header + /* Check to see if it is a standard config header */ else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - // Check subsystem vendor and ID + /* Check subsystem vendor and ID */ pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register); if (temp_register != func->config_space[0x2C >> 2]) { - // If it's a SMART-2 and the register isn't filled - // in, ignore the difference because - // they just have an old rev of the firmware - + /* If it's a SMART-2 and the register isn't + * filled in, ignore the difference because + * they just have an old rev of the firmware + */ if (!((func->config_space[0] == 0xAE100E11) && (temp_register == 0x00L))) return(ADAPTER_NOT_SAME); } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO + * space requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -1135,23 +1128,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) type = 0; } - // Check information in slot structure + /* Check information in slot structure */ if (func->base_length[(cloop - 0x10) >> 2] != base) return(ADAPTER_NOT_SAME); if (func->base_type[(cloop - 0x10) >> 2] != type) return(ADAPTER_NOT_SAME); - } // End of base register loop + } /* End of base register loop */ - } // End of (type 0 config space) else + } /* End of (type 0 config space) else */ else { - // this is not a type 0 or 1 config space header so - // we don't know how to do it + /* this is not a type 0 or 1 config space header so + * we don't know how to do it + */ return(DEVICE_TYPE_NOT_SUPPORTED); } - // Get the next function + /* Get the next function */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -1168,7 +1162,7 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) * this function is for hot plug ADD! * * returns 0 if success - */ + */ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start) { u8 temp; @@ -1187,10 +1181,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff); dbg("rom_resource_table = %p\n", rom_resource_table); - if (rom_resource_table == NULL) { + if (rom_resource_table == NULL) return -ENODEV; - } - // Sum all resources and setup resource maps + + /* Sum all resources and setup resource maps */ unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); dbg("unused_IRQ = %x\n", unused_IRQ); @@ -1222,13 +1216,11 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st temp = 0; - if (!cpqhp_nic_irq) { + if (!cpqhp_nic_irq) cpqhp_nic_irq = ctrl->cfgspc_irq; - } - if (!cpqhp_disk_irq) { + if (!cpqhp_disk_irq) cpqhp_disk_irq = ctrl->cfgspc_irq; - } dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq); @@ -1262,13 +1254,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, primary_bus, secondary_bus, max_bus); - // If this entry isn't for our controller's bus, ignore it + /* If this entry isn't for our controller's bus, ignore it */ if (primary_bus != ctrl->bus) { i--; one_slot += sizeof (struct slot_rt); continue; } - // find out if this entry is for an occupied slot + /* find out if this entry is for an occupied slot */ ctrl->pci_bus->number = primary_bus; pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); dbg("temp_D_word = %x\n", temp_dword); @@ -1282,13 +1274,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++); } - // If we can't find a match, skip this table entry + /* If we can't find a match, skip this table entry */ if (!func) { i--; one_slot += sizeof (struct slot_rt); continue; } - // this may not work and shouldn't be used + /* this may not work and shouldn't be used */ if (secondary_bus != primary_bus) bridged_slot = 1; else @@ -1301,7 +1293,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } - // If we've got a valid IO base, use it + /* If we've got a valid IO base, use it */ temp_dword = io_base + io_length; @@ -1325,7 +1317,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid memory base, use it + /* If we've got a valid memory base, use it */ temp_dword = mem_base + mem_length; if ((mem_base) && (temp_dword < 0x10000)) { mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL); @@ -1348,8 +1340,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid prefetchable memory base, and - // the base + length isn't greater than 0xFFFF + /* If we've got a valid prefetchable memory base, and + * the base + length isn't greater than 0xFFFF + */ temp_dword = pre_mem_base + pre_mem_length; if ((pre_mem_base) && (temp_dword < 0x10000)) { p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL); @@ -1372,9 +1365,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid bus number, use it - // The second condition is to ignore bus numbers on - // populated slots that don't have PCI-PCI bridges + /* If we've got a valid bus number, use it + * The second condition is to ignore bus numbers on + * populated slots that don't have PCI-PCI bridges + */ if (secondary_bus && (secondary_bus != primary_bus)) { bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL); if (!bus_node) @@ -1398,8 +1392,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st one_slot += sizeof (struct slot_rt); } - // If all of the following fail, we don't have any resources for - // hot plug add + /* If all of the following fail, we don't have any resources for + * hot plug add + */ rc = 1; rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); |