diff options
Diffstat (limited to 'drivers/pci/hotplug/pciehp_ctrl.c')
| -rw-r--r-- | drivers/pci/hotplug/pciehp_ctrl.c | 2706 |
1 files changed, 2706 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c new file mode 100644 index 000000000000..0dbcf04aa35e --- /dev/null +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -0,0 +1,2706 @@ +/* + * PCI Express Hot Plug Controller Driver + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * Copyright (C) 2003-2004 Intel Corporation + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/smp_lock.h> +#include <linux/pci.h> +#include "../pci.h" +#include "pciehp.h" +#include "pciehprm.h" + +static u32 configure_new_device(struct controller *ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); +static int configure_new_function( struct controller *ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); +static void interrupt_event_handler(struct controller *ctrl); + +static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ +static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */ +static int event_finished; +static unsigned long pushbutton_pending; /* = 0 */ +static unsigned long surprise_rm_pending; /* = 0 */ + +u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) +{ + struct controller *ctrl = (struct controller *) inst_id; + struct slot *p_slot; + u8 rc = 0; + u8 getstatus; + struct pci_func *func; + struct event_info *taskInfo; + + /* Attention Button Change */ + dbg("pciehp: Attention button interrupt received.\n"); + + func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); + + /* This is the structure that tells the worker thread what to do */ + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + + /* + * Button pressed - See if need to TAKE ACTION!!! + */ + info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot); + taskInfo->event_type = INT_BUTTON_PRESS; + + if ((p_slot->state == BLINKINGON_STATE) + || (p_slot->state == BLINKINGOFF_STATE)) { + /* Cancel if we are still blinking; this means that we press the + * attention again before the 5 sec. limit expires to cancel hot-add + * or hot-remove + */ + taskInfo->event_type = INT_BUTTON_CANCEL; + info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot); + } else if ((p_slot->state == POWERON_STATE) + || (p_slot->state == POWEROFF_STATE)) { + /* Ignore if the slot is on power-on or power-off state; this + * means that the previous attention button action to hot-add or + * hot-remove is undergoing + */ + taskInfo->event_type = INT_BUTTON_IGNORE; + info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot); + } + + if (rc) + up(&event_semaphore); /* signal event thread that new event is posted */ + + return 0; + +} + +u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) +{ + struct controller *ctrl = (struct controller *) inst_id; + struct slot *p_slot; + u8 rc = 0; + u8 getstatus; + struct pci_func *func; + struct event_info *taskInfo; + + /* Switch Change */ + dbg("pciehp: Switch interrupt received.\n"); + + func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); + + /* This is the structure that tells the worker thread + * what to do + */ + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + + if (getstatus) { + /* + * Switch opened + */ + info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); + func->switch_save = 0; + taskInfo->event_type = INT_SWITCH_OPEN; + } else { + /* + * Switch closed + */ + info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); + func->switch_save = 0x10; + taskInfo->event_type = INT_SWITCH_CLOSE; + } + + if (rc) + up(&event_semaphore); /* signal event thread that new event is posted */ + + return rc; +} + +u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) +{ + struct controller *ctrl = (struct controller *) inst_id; + struct slot *p_slot; + u8 rc = 0; + struct pci_func *func; + struct event_info *taskInfo; + + /* Presence Change */ + dbg("pciehp: Presence/Notify input change.\n"); + + func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); + + /* This is the structure that tells the worker thread + * what to do + */ + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + /* Switch is open, assume a presence change + * Save the presence state + */ + p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + if (func->presence_save) { + /* + * Card Present + */ + info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot); + taskInfo->event_type = INT_PRESENCE_ON; + } else { + /* + * Not Present + */ + info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot); + taskInfo->event_type = INT_PRESENCE_OFF; + } + + if (rc) + up(&event_semaphore); /* signal event thread that new event is posted */ + + return rc; +} + +u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) +{ + struct controller *ctrl = (struct controller *) inst_id; + struct slot *p_slot; + u8 rc = 0; + struct pci_func *func; + struct event_info *taskInfo; + + /* power fault */ + dbg("pciehp: Power fault interrupt received.\n"); + + func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); + + /* this is the structure that tells the worker thread + * what to do + */ + taskInfo = &(ctrl->event_queue[ctrl->next_event]); + ctrl->next_event = (ctrl->next_event + 1) % 10; + taskInfo->hp_slot = hp_slot; + + rc++; + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { + /* + * power fault Cleared + */ + info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); + func->status = 0x00; + taskInfo->event_type = INT_POWER_FAULT_CLEAR; + } else { + /* + * power fault + */ + info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); + taskInfo->event_type = INT_POWER_FAULT; + /* set power fault status for this board */ + func->status = 0xFF; + info("power fault bit %x set\n", hp_slot); + } + if (rc) + up(&event_semaphore); /* signal event thread that new event is posted */ + + return rc; +} + + +/** + * sort_by_size: sort nodes by their length, smallest first. + * + * @head: list to sort + */ +static int sort_by_size(struct pci_resource **head) +{ + struct pci_resource *current_res; + struct pci_resource *next_res; + int out_of_order = 1; + + if (!(*head)) + return 1; + + if (!((*head)->next)) + return 0; + + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->length > (*head)->next->length)) { + out_of_order++; + current_res = *head; + *head = (*head)->next; + current_res->next = (*head)->next; + (*head)->next = current_res; + } + + current_res = *head; + + while (current_res->next && current_res->next->next) { + if (current_res->next->length > current_res->next->next->length) { + out_of_order++; + next_res = current_res->next; + current_res->next = current_res->next->next; + current_res = current_res->next; + next_res->next = current_res->next; + current_res->next = next_res; + } else + current_res = current_res->next; + } + } /* End of out_of_order loop */ + + return 0; +} + + +/* + * sort_by_max_size + * + * Sorts nodes on the list by their length. + * Largest first. + * + */ +static int sort_by_max_size(struct pci_resource **head) +{ + struct pci_resource *current_res; + struct pci_resource *next_res; + int out_of_order = 1; + + if (!(*head)) + return 1; + + if (!((*head)->next)) + return 0; + + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->length < (*head)->next->length)) { + out_of_order++; + current_res = *head; + *head = (*head)->next; + current_res->next = (*head)->next; + (*head)->next = current_res; + } + + current_res = *head; + + while (current_res->next && current_res->next->next) { + if (current_res->next->length < current_res->next->next->length) { + out_of_order++; + next_res = current_res->next; + current_res->next = current_res->next->next; + current_res = current_res->next; + next_res->next = current_res->next; + current_res->next = next_res; + } else + current_res = current_res->next; + } + } /* End of out_of_order loop */ + + return 0; +} + + +/** + * do_pre_bridge_resource_split: return one unused resource node + * @head: list to scan + * + */ +static struct pci_resource * +do_pre_bridge_resource_split(struct pci_resource **head, + struct pci_resource **orig_head, u32 alignment) +{ + struct pci_resource *prevnode = NULL; + struct pci_resource *node; + struct pci_resource *split_node; + u32 rc; + u32 temp_dword; + dbg("do_pre_bridge_resource_split\n"); + + if (!(*head) || !(*orig_head)) + return NULL; + + rc = pciehp_resource_sort_and_combine(head); + + if (rc) + return NULL; + + if ((*head)->base != (*orig_head)->base) + return NULL; + + if ((*head)->length == (*orig_head)->length) + return NULL; + + + /* If we got here, there the bridge requires some of the resource, but + * we may be able to split some off of the front + */ + node = *head; + + if (node->length & (alignment -1)) { + /* this one isn't an aligned length, so we'll make a new entry + * and split it up. + */ + split_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); + + if (!split_node) + return NULL; + + temp_dword = (node->length | (alignment-1)) + 1 - alignment; + + split_node->base = node->base; + split_node->length = temp_dword; + + node->length -= temp_dword; + node->base += split_node->length; + + /* Put it in the list */ + *head = split_node; + split_node->next = node; + } + + if (node->length < alignment) + return NULL; + + /* Now unlink it */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + + return node; +} + + +/** + * do_bridge_resource_split: return one unused resource node + * @head: list to scan + * + */ +static struct pci_resource * +do_bridge_resource_split(struct pci_resource **head, u32 alignment) +{ + struct pci_resource *prevnode = NULL; + struct pci_resource *node; + u32 rc; + u32 temp_dword; + + if (!(*head)) + return NULL; + + rc = pciehp_resource_sort_and_combine(head); + + if (rc) + return NULL; + + node = *head; + + while (node->next) { + prevnode = node; + node = node->next; + kfree(prevnode); + } + + if (node->length < alignment) { + kfree(node); + return NULL; + } + + if (node->base & (alignment - 1)) { + /* Short circuit if adjusted size is too small */ + temp_dword = (node->base | (alignment-1)) + 1; + if ((node->length - (temp_dword - node->base)) < alignment) { + kfree(node); + return NULL; + } + + node->length -= (temp_dword - node->base); + node->base = temp_dword; + } + + if (node->length & (alignment - 1)) { + /* There's stuff in use after this node */ + kfree(node); + return NULL; + } + + return node; +} + + +/* + * get_io_resource + * + * this function sorts the resource list by size and then + * returns the first node of "size" length that is not in the + * ISA aliasing window. If it finds a node larger than "size" + * it will split it up. + * + * size must be a power of two. + */ +static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *prevnode; + struct pci_resource *node; + struct pci_resource *split_node = NULL; + u32 temp_dword; + + if (!(*head)) + return NULL; + + if ( pciehp_resource_sort_and_combine(head) ) + return NULL; + + if ( sort_by_size(head) ) + return NULL; + + for (node = *head; node; node = node->next) { + if (node->length < size) + continue; + + if (node->base & (size - 1)) { + /* this one isn't base aligned properly + so we'll make a new entry and split it up */ + temp_dword = (node->base | (size-1)) + 1; + + /*/ Short circuit if adjusted size is too small */ + if ((node->length - (temp_dword - node->base)) < size) + continue; + + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base; + split_node->length = temp_dword - node->base; + node->base = temp_dword; + node->length -= split_node->length; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of non-aligned base */ + + /* Don't need to check if too small since we already did */ + if (node->length > size) { + /* this one is longer than we need + so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base + size; + split_node->length = node->length - size; + node->length = size; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of too big on top end */ + + /* For IO make sure it's not in the ISA aliasing space */ + if (node->base & 0x300L) + continue; + + /* If we got here, then it is the right size + Now take it out of the list */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + /* Stop looping */ + break; + } + + return node; +} + + +/* + * get_max_resource + * + * Gets the largest node that is at least "size" big from the + * list pointed to by head. It aligns the node on top and bottom + * to "size" alignment before returning it. + * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M + * This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot. + */ +static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *max; + struct pci_resource *temp; + struct pci_resource *split_node; + u32 temp_dword; + u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 }; + int i; + + if (!(*head)) + return NULL; + + if (pciehp_resource_sort_and_combine(head)) + return NULL; + + if (sort_by_max_size(head)) + return NULL; + + for (max = *head;max; max = max->next) { + + /* If not big enough we could probably just bail, + instead we'll continue to the next. */ + if (max->length < size) + continue; + + if (max->base & (size - 1)) { + /* this one isn't base aligned properly + so we'll make a new entry and split it up */ + temp_dword = (max->base | (size-1)) + 1; + + /* Short circuit if adjusted size is too small */ + if ((max->length - (temp_dword - max->base)) < size) + continue; + + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = max->base; + split_node->length = temp_dword - max->base; + max->base = temp_dword; + max->length -= split_node->length; + + /* Put it next in the list */ + split_node->next = max->next; + max->next = split_node; + } + + if ((max->base + max->length) & (size - 1)) { + /* this one isn't end aligned properly at the top + so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + temp_dword = ((max->base + max->length) & ~(size - 1)); + split_node->base = temp_dword; + split_node->length = max->length + max->base + - split_node->base; + max->length -= split_node->length; + + /* Put it in the list */ + split_node->next = max->next; + max->next = split_node; + } + + /* Make sure it didn't shrink too much when we aligned it */ + if (max->length < size) + continue; + + for ( i = 0; max_size[i] > size; i++) { + if (max->length > max_size[i]) { + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + if (!split_node) + break; /* return NULL; */ + split_node->base = max->base + max_size[i]; + split_node->length = max->length - max_size[i]; + max->length = max_size[i]; + /* Put it next in the list */ + split_node->next = max->next; + max->next = split_node; + break; + } + } + + /* Now take it out of the list */ + temp = (struct pci_resource*) *head; + if (temp == max) { + *head = max->next; + } else { + while (temp && temp->next != max) { + temp = temp->next; + } + + temp->next = max->next; + } + + max->next = NULL; + return max; + } + + /* If we get here, we couldn't find one */ + return NULL; +} + + +/* + * get_resource + * + * this function sorts the resource list by size and then + * returns the first node of "size" length. If it finds a node + * larger than "size" it will split it up. + * + * size must be a power of two. + */ +static struct pci_resource *get_resource(struct pci_resource **head, u32 size) +{ + struct pci_resource *prevnode; + struct pci_resource *node; + struct pci_resource *split_node; + u32 temp_dword; + + if (!(*head)) + return NULL; + + if ( pciehp_resource_sort_and_combine(head) ) + return NULL; + + if ( sort_by_size(head) ) + return NULL; + + for (node = *head; node; node = node->next) { + dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n", + __FUNCTION__, size, node, node->base, node->length); + if (node->length < size) + continue; + + if (node->base & (size - 1)) { + dbg("%s: not aligned\n", __FUNCTION__); + /* this one isn't base aligned properly + so we'll make a new entry and split it up */ + temp_dword = (node->base | (size-1)) + 1; + + /* Short circuit if adjusted size is too small */ + if ((node->length - (temp_dword - node->base)) < size) + continue; + + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base; + split_node->length = temp_dword - node->base; + node->base = temp_dword; + node->length -= split_node->length; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of non-aligned base */ + + /* Don't need to check if too small since we already did */ + if (node->length > size) { + dbg("%s: too big\n", __FUNCTION__); + /* this one is longer than we need + so we'll make a new entry and split it up */ + split_node = kmalloc(sizeof(struct pci_resource), + GFP_KERNEL); + + if (!split_node) + return NULL; + + split_node->base = node->base + size; + split_node->length = node->length - size; + node->length = size; + + /* Put it in the list */ + split_node->next = node->next; + node->next = split_node; + } /* End of too big on top end */ + + dbg("%s: got one!!!\n", __FUNCTION__); + /* If we got here, then it is the right size + Now take it out of the list */ + if (*head == node) { + *head = node->next; + } else { + prevnode = *head; + while (prevnode->next != node) + prevnode = prevnode->next; + + prevnode->next = node->next; + } + node->next = NULL; + /* Stop looping */ + break; + } + return node; +} + + +/* + * pciehp_resource_sort_and_combine + * + * Sorts all of the nodes in the list in ascending order by + * their base addresses. Also does garbage collection by + * combining adjacent nodes. + * + * returns 0 if success + */ +int pciehp_resource_sort_and_combine(struct pci_resource **head) +{ + struct pci_resource *node1; + struct pci_resource *node2; + int out_of_order = 1; + + dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head); + + if (!(*head)) + return 1; + + dbg("*head->next = %p\n",(*head)->next); + + if (!(*head)->next) + return 0; /* only one item on the list, already sorted! */ + + dbg("*head->base = 0x%x\n",(*head)->base); + dbg("*head->next->base = 0x%x\n",(*head)->next->base); + while (out_of_order) { + out_of_order = 0; + + /* Special case for swapping list head */ + if (((*head)->next) && + ((*head)->base > (*head)->next->base)) { + node1 = *head; + (*head) = (*head)->next; + node1->next = (*head)->next; + (*head)->next = node1; + out_of_order++; + } + + node1 = (*head); + + while (node1->next && node1->next->next) { + if (node1->next->base > node1->next->next->base) { + out_of_order++; + node2 = node1->next; + node1->next = node1->next->next; + node1 = node1->next; + node2->next = node1->next; + node1->next = node2; + } else + node1 = node1->next; + } + } /* End of out_of_order loop */ + + node1 = *head; + + while (node1 && node1->next) { + if ((node1->base + node1->length) == node1->next->base) { + /* Combine */ + dbg("8..\n"); + node1->length += node1->next->length; + node2 = node1->next; + node1->next = node1->next->next; + kfree(node2); + } else + node1 = node1->next; + } + + return 0; +} + + +/** + * pciehp_slot_create - Creates a node and adds it to the proper bus. + * @busnumber - bus where new node is to be located + * + * Returns pointer to the new node or NULL if unsuccessful + */ +struct pci_func *pciehp_slot_create(u8 busnumber) +{ + struct pci_func *new_slot; + struct pci_func *next; + dbg("%s: busnumber %x\n", __FUNCTION__, busnumber); + new_slot = kmalloc(sizeof(struct pci_func), GFP_KERNEL); + + if (new_slot == NULL) + return new_slot; + + memset(new_slot, 0, sizeof(struct pci_func)); + + new_slot->next = NULL; + new_slot->configured = 1; + + if (pciehp_slot_list[busnumber] == NULL) { + pciehp_slot_list[busnumber] = new_slot; + } else { + next = pciehp_slot_list[busnumber]; + while (next->next != NULL) + next = next->next; + next->next = new_slot; + } + return new_slot; +} + + +/** + * slot_remove - Removes a node from the linked list of slots. + * @old_slot: slot to remove + * + * Returns 0 if successful, !0 otherwise. + */ +static int slot_remove(struct pci_func * old_slot) +{ + struct pci_func *next; + + if (old_slot == NULL) + return 1; + + next = pciehp_slot_list[old_slot->bus]; + + if (next == NULL) + return 1; + + if (next == old_slot) { + pciehp_slot_list[old_slot->bus] = old_slot->next; + pciehp_destroy_board_resources(old_slot); + kfree(old_slot); + return 0; + } + + while ((next->next != old_slot) && (next->next != NULL)) { + next = next->next; + } + + if (next->next == old_slot) { + next->next = old_slot->next; + pciehp_destroy_board_resources(old_slot); + kfree(old_slot); + return 0; + } else + return 2; +} + + +/** + * bridge_slot_remove - Removes a node from the linked list of slots. + * @bridge: bridge to remove + * + * Returns 0 if successful, !0 otherwise. + */ +static int bridge_slot_remove(struct pci_func *bridge) +{ + u8 subordinateBus, secondaryBus; + u8 tempBus; + struct pci_func *next; + + if (bridge == NULL) + return 1; + + secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; + subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; + + for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { + next = pciehp_slot_list[tempBus]; + + while (!slot_remove(next)) { + next = pciehp_slot_list[tempBus]; + } + } + + next = pciehp_slot_list[bridge->bus]; + + if (next == NULL) { + return 1; + } + + if (next == bridge) { + pciehp_slot_list[bridge->bus] = bridge->next; + kfree(bridge); + return 0; + } + + while ((next->next != bridge) && (next->next != NULL)) { + next = next->next; + } + + if (next->next == bridge) { + next->next = bridge->next; + kfree(bridge); + return 0; + } else + return 2; +} + + +/** + * pciehp_slot_find - Looks for a node by bus, and device, multiple functions accessed + * @bus: bus to find + * @device: device to find + * @index: is 0 for first function found, 1 for the second... + * + * Returns pointer to the node if successful, %NULL otherwise. + */ +struct pci_func *pciehp_slot_find(u8 bus, u8 device, u8 index) +{ + int found = -1; + struct pci_func *func; + + func = pciehp_slot_list[bus]; + dbg("%s: bus %x device %x index %x\n", + __FUNCTION__, bus, device, index); + if (func != NULL) { + dbg("%s: func-> bus %x device %x function %x pci_dev %p\n", + __FUNCTION__, func->bus, func->device, func->function, + func->pci_dev); + } else + dbg("%s: func == NULL\n", __FUNCTION__); + + if ((func == NULL) || ((func->device == device) && (index == 0))) + return func; + + if (func->device == device) + found++; + + while (func->next != NULL) { + func = func->next; + + dbg("%s: In while loop, func-> bus %x device %x function %x pci_dev %p\n", + __FUNCTION__, func->bus, func->device, func->function, + func->pci_dev); + if (func->device == device) + found++; + dbg("%s: while loop, found %d, index %d\n", __FUNCTION__, + found, index); + + if ((found == index) || (func->function == index)) { + dbg("%s: Found bus %x dev %x func %x\n", __FUNCTION__, + func->bus, func->device, func->function); + return func; + } + } + + return NULL; +} + +static int is_bridge(struct pci_func * func) +{ + /* Check the header type */ + if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) + return 1; + else + return 0; +} + + +/* The following routines constitute the bulk of the + hotplug controller logic + */ + +static void set_slot_off(struct controller *ctrl, struct slot * pslot) +{ + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + /* turn off slot, turn on Amber LED, turn off Green LED if supported*/ + if (POWER_CTRL(ctrl->ctrlcap)) { + if (pslot->hpc_ops->power_off_slot(pslot)) { + err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__); + up(&ctrl->crit_sect); + return; + } + wait_for_ctrl_irq (ctrl); + } + + if (PWR_LED(ctrl->ctrlcap)) { + pslot->hpc_ops->green_led_off(pslot); + wait_for_ctrl_irq (ctrl); + } + + if (ATTN_LED(ctrl->ctrlcap)) { + if (pslot->hpc_ops->set_attention_status(pslot, 1)) { + err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__); + up(&ctrl->crit_sect); + return; + } + wait_for_ctrl_irq (ctrl); + } + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); +} + +/** + * board_added - Called after a board has been added to the system. + * + * Turns power on for the board + * Configures board + * + */ +static u32 board_added(struct pci_func * func, struct controller * ctrl) +{ + u8 hp_slot; + int index; + u32 temp_register = 0xFFFFFFFF; + u32 rc = 0; + struct pci_func *new_func = NULL; + struct slot *p_slot; + struct resource_lists res_lists; + + p_slot = pciehp_find_slot(ctrl, func->device); + hp_slot = func->device - ctrl->slot_device_offset; + + dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + if (POWER_CTRL(ctrl->ctrlcap)) { + /* Power on slot */ + rc = p_slot->hpc_ops->power_on_slot(p_slot); + if (rc) { + up(&ctrl->crit_sect); + return -1; + } + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + if (PWR_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->green_led_blink(p_slot); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + /* Wait for ~1 second */ + dbg("%s: before long_delay\n", __FUNCTION__); + wait_for_ctrl_irq (ctrl); + dbg("%s: afterlong_delay\n", __FUNCTION__); + + /* Check link training status */ + rc = p_slot->hpc_ops->check_lnk_status(ctrl); + if (rc) { + err("%s: Failed to check link status\n", __FUNCTION__); + set_slot_off(ctrl, p_slot); + return rc; + } + + dbg("%s: func status = %x\n", __FUNCTION__, func->status); + + /* Check for a power fault */ + if (func->status == 0xFF) { + /* power fault occurred, but it was benign */ + temp_register = 0xFFFFFFFF; + dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); + rc = POWER_FAILURE; + func->status = 0; + } else { + /* Get vendor/device ID u32 */ + rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function), + PCI_VENDOR_ID, &temp_register); + dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc); + dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register); + + if (rc != 0) { + /* Something's wrong here */ + temp_register = 0xFFFFFFFF; + dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register); + } + /* Preset return code. It will be changed later if things go okay. */ + rc = NO_ADAPTER_PRESENT; + } + + /* All F's is an empty slot or an invalid board */ + if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */ + res_lists.io_head = ctrl->io_head; + res_lists.mem_head = ctrl->mem_head; + res_lists.p_mem_head = ctrl->p_mem_head; + res_lists.bus_head = ctrl->bus_head; + res_lists.irqs = NULL; + + rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0); + dbg("%s: back from configure_new_device\n", __FUNCTION__); + + ctrl->io_head = res_lists.io_head; + ctrl->mem_head = res_lists.mem_head; + ctrl->p_mem_head = res_lists.p_mem_head; + ctrl->bus_head = res_lists.bus_head; + + pciehp_resource_sort_and_combine(&(ctrl->mem_head)); + pciehp_resource_sort_and_combine(&(ctrl->p_mem_head)); + pciehp_resource_sort_and_combine(&(ctrl->io_head)); + pciehp_resource_sort_and_combine(&(ctrl->bus_head)); + + if (rc) { + set_slot_off(ctrl, p_slot); + return rc; + } + pciehp_save_slot_config(ctrl, func); + + func->status = 0; + func->switch_save = 0x10; + func->is_a_board = 0x01; + + /* next, we will instantiate the linux pci_dev structures + * (with appropriate driver notification, if already present) + */ + index = 0; + do { + new_func = pciehp_slot_find(ctrl->slot_bus, func->device, index++); + if (new_func && !new_func->pci_dev) { + dbg("%s:call pci_hp_configure_dev, func %x\n", + __FUNCTION__, index); + pciehp_configure_device(ctrl, new_func); + } + } while (new_func); + + /* + * Some PCI Express root ports require fixup after hot-plug operation. + */ + if (pcie_mch_quirk) + pci_fixup_device(pci_fixup_final, ctrl->pci_dev); + + if (PWR_LED(ctrl->ctrlcap)) { + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + p_slot->hpc_ops->green_led_on(p_slot); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + } + } else { + set_slot_off(ctrl, p_slot); + return -1; + } + return 0; +} + + +/** + * remove_board - Turns off slot and LED's + * + */ +static u32 remove_board(struct pci_func *func, struct controller *ctrl) +{ + int index; + u8 skip = 0; + u8 device; + u8 hp_slot; + u32 rc; + struct resource_lists res_lists; + struct pci_func *temp_func; + struct slot *p_slot; + + if (func == NULL) + return 1; + + if (pciehp_unconfigure_device(func)) + return 1; + + device = func->device; + + hp_slot = func->device - ctrl->slot_device_offset; + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); + + if ((ctrl->add_support) && + !(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) { + /* Here we check to see if we've saved any of the board's + * resources already. If so, we'll skip the attempt to + * determine what's being used. + */ + index = 0; + + temp_func = func; + + while ((temp_func = pciehp_slot_find(temp_func->bus, temp_func->device, index++))) { + if (temp_func->bus_head || temp_func->mem_head + || temp_func->p_mem_head || temp_func->io_head) { + skip = 1; + break; + } + } + + if (!skip) + rc = pciehp_save_used_resources(ctrl, func, DISABLE_CARD); + } + /* Change status to shutdown */ + if (func->is_a_board) + func->status = 0x01; + func->configured = 0; + + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + if (POWER_CTRL(ctrl->ctrlcap)) { + /* power off slot */ + rc = p_slot->hpc_ops->power_off_slot(p_slot); + if (rc) { + err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); + up(&ctrl->crit_sect); + return rc; + } + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + if (PWR_LED(ctrl->ctrlcap)) { + /* turn off Green LED */ + p_slot->hpc_ops->green_led_off(p_slot); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + if (ctrl->add_support) { + while (func) { + res_lists.io_head = ctrl->io_head; + res_lists.mem_head = ctrl->mem_head; + res_lists.p_mem_head = ctrl->p_mem_head; + res_lists.bus_head = ctrl->bus_head; + + dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", + func->bus, func->device, func->function); + + pciehp_return_board_resources(func, &res_lists); + + ctrl->io_head = res_lists.io_head; + ctrl->mem_head = res_lists.mem_head; + ctrl->p_mem_head = res_lists.p_mem_head; + ctrl->bus_head = res_lists.bus_head; + + pciehp_resource_sort_and_combine(&(ctrl->mem_head)); + pciehp_resource_sort_and_combine(&(ctrl->p_mem_head)); + pciehp_resource_sort_and_combine(&(ctrl->io_head)); + pciehp_resource_sort_and_combine(&(ctrl->bus_head)); + + if (is_bridge(func)) { + dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", + ctrl->seg, func->bus, func->device, func->function); + bridge_slot_remove(func); + } else { + dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", + ctrl->seg, func->bus, func->device, func->function); + slot_remove(func); + } + + func = pciehp_slot_find(ctrl->slot_bus, device, 0); + } + + /* Setup slot structure with entry for empty slot */ + func = pciehp_slot_create(ctrl->slot_bus); + + if (func == NULL) { + return 1; + } + + func->bus = ctrl->slot_bus; + func->device = device; + func->function = 0; + func->configured = 0; + func->switch_save = 0x10; + func->is_a_board = 0; + } + + return 0; +} + + +static void pushbutton_helper_thread(unsigned long data) +{ + pushbutton_pending = data; + + up(&event_semaphore); +} + +/** + * pciehp_pushbutton_thread + * + * Scheduled procedure to handle blocking stuff for the pushbuttons + * Handles all pending events and exits. + * + */ +static void pciehp_pushbutton_thread(unsigned long slot) +{ + struct slot *p_slot = (struct slot *) slot; + u8 getstatus; + + pushbutton_pending = 0; + + if (!p_slot) { + dbg("%s: Error! slot NULL\n", __FUNCTION__); + return; + } + + p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (getstatus) { + p_slot->state = POWEROFF_STATE; + dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + + pciehp_disable_slot(p_slot); + p_slot->state = STATIC_STATE; + } else { + p_slot->state = POWERON_STATE; + dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + + if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { + /* Wait for exclusive access to hardware */ + down(&p_slot->ctrl->crit_sect); + + p_slot->hpc_ops->green_led_off(p_slot); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (p_slot->ctrl); + + /* Done with exclusive hardware access */ + up(&p_slot->ctrl->crit_sect); + } + p_slot->state = STATIC_STATE; + } + + return; +} + +/** + * pciehp_surprise_rm_thread + * + * Scheduled procedure to handle blocking stuff for the surprise removal + * Handles all pending events and exits. + * + */ +static void pciehp_surprise_rm_thread(unsigned long slot) +{ + struct slot *p_slot = (struct slot *) slot; + u8 getstatus; + + surprise_rm_pending = 0; + + if (!p_slot) { + dbg("%s: Error! slot NULL\n", __FUNCTION__); + return; + } + + p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (!getstatus) { + p_slot->state = POWEROFF_STATE; + dbg("In removing board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + + pciehp_disable_slot(p_slot); + p_slot->state = STATIC_STATE; + } else { + p_slot->state = POWERON_STATE; + dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + + if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { + /* Wait for exclusive access to hardware */ + down(&p_slot->ctrl->crit_sect); + + p_slot->hpc_ops->green_led_off(p_slot); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (p_slot->ctrl); + + /* Done with exclusive hardware access */ + up(&p_slot->ctrl->crit_sect); + } + p_slot->state = STATIC_STATE; + } + + return; +} + + + +/* this is the main worker thread */ +static int event_thread(void* data) +{ + struct controller *ctrl; + lock_kernel(); + daemonize("pciehpd_event"); + + unlock_kernel(); + + while (1) { + dbg("!!!!event_thread sleeping\n"); + down_interruptible (&event_semaphore); + dbg("event_thread woken finished = %d\n", event_finished); + if (event_finished || signal_pending(current)) + break; + /* Do stuff here */ + if (pushbutton_pending) + pciehp_pushbutton_thread(pushbutton_pending); + else if (surprise_rm_pending) + pciehp_surprise_rm_thread(surprise_rm_pending); + else + for (ctrl = pciehp_ctrl_list; ctrl; ctrl=ctrl->next) + interrupt_event_handler(ctrl); + } + dbg("event_thread signals exit\n"); + up(&event_exit); + return 0; +} + +int pciehp_event_start_thread(void) +{ + int pid; + + /* initialize our semaphores */ + init_MUTEX_LOCKED(&event_exit); + event_finished=0; + + init_MUTEX_LOCKED(&event_semaphore); + pid = kernel_thread(event_thread, NULL, 0); + + if (pid < 0) { + err ("Can't start up our event thread\n"); + return -1; + } + dbg("Our event thread pid = %d\n", pid); + return 0; +} + + +void pciehp_event_stop_thread(void) +{ + event_finished = 1; + dbg("event_thread finish command given\n"); + up(&event_semaphore); + dbg("wait for event_thread to exit\n"); + down(&event_exit); +} + + +static int update_slot_info(struct slot *slot) +{ + struct hotplug_slot_info *info; + /* char buffer[SLOT_NAME_SIZE]; */ + int result; + + info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* make_slot_name (&buffer[0], SLOT_NAME_SIZE, slot); */ + + slot->hpc_ops->get_power_status(slot, &(info->power_status)); + slot->hpc_ops->get_attention_status(slot, &(info->attention_status)); + slot->hpc_ops->get_latch_status(slot, &(info->latch_status)); + slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status)); + + /* result = pci_hp_change_slot_info(buffer, info); */ + result = pci_hp_change_slot_info(slot->hotplug_slot, info); + kfree (info); + return result; +} + +static void interrupt_event_handler(struct controller *ctrl) +{ + int loop = 0; + int change = 1; + struct pci_func *func; + u8 hp_slot; + u8 getstatus; + struct slot *p_slot; + + while (change) { + change = 0; + + for (loop = 0; loop < 10; loop++) { + if (ctrl->event_queue[loop].event_type != 0) { + hp_slot = ctrl->event_queue[loop].hp_slot; + + func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); + + p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + dbg("hp_slot %d, func %p, p_slot %p\n", hp_slot, func, p_slot); + + if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { + dbg("button cancel\n"); + del_timer(&p_slot->task_event); + + switch (p_slot->state) { + case BLINKINGOFF_STATE: + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + if (PWR_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->green_led_on(p_slot); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + if (ATTN_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->set_attention_status(p_slot, 0); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + break; + case BLINKINGON_STATE: + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + if (PWR_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->green_led_off(p_slot); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + if (ATTN_LED(ctrl->ctrlcap)){ + p_slot->hpc_ops->set_attention_status(p_slot, 0); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + break; + default: + warn("Not a valid state\n"); + return; + } + info(msg_button_cancel, p_slot->number); + p_slot->state = STATIC_STATE; + } + /* ***********Button Pressed (No action on 1st press...) */ + else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) { + + if (ATTN_BUTTN(ctrl->ctrlcap)) { + dbg("Button pressed\n"); + p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (getstatus) { + /* slot is on */ + dbg("slot is on\n"); + p_slot->state = BLINKINGOFF_STATE; + info(msg_button_off, p_slot->number); + } else { + /* slot is off */ + dbg("slot is off\n"); + p_slot->state = BLINKINGON_STATE; + info(msg_button_on, p_slot->number); + } + + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + /* blink green LED and turn off amber */ + if (PWR_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->green_led_blink(p_slot); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + if (ATTN_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->set_attention_status(p_slot, 0); + + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); + } + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + init_timer(&p_slot->task_event); + p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ + p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread; + p_slot->task_event.data = (unsigned long) p_slot; + + dbg("add_timer p_slot = %p\n", (void *) p_slot); + add_timer(&p_slot->task_event); + } + } + /***********POWER FAULT********************/ + else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) { + if (POWER_CTRL(ctrl->ctrlcap)) { + dbg("power fault\n"); + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + + if (ATTN_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->set_attention_status(p_slot, 1); + wait_for_ctrl_irq (ctrl); + } + + if (PWR_LED(ctrl->ctrlcap)) { + p_slot->hpc_ops->green_led_off(p_slot); + wait_for_ctrl_irq (ctrl); + } + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + } + } + /***********SURPRISE REMOVAL********************/ + else if ((ctrl->event_queue[loop].event_type == INT_PRESENCE_ON) || + (ctrl->event_queue[loop].event_type == INT_PRESENCE_OFF)) { + if (HP_SUPR_RM(ctrl->ctrlcap)) { + dbg("Surprise Removal\n"); + if (p_slot) { + surprise_rm_pending = (unsigned long) p_slot; + up(&event_semaphore); + update_slot_info(p_slot); + } + } + } else { + /* refresh notification */ + if (p_slot) + update_slot_info(p_slot); + } + + ctrl->event_queue[loop].event_type = 0; + + change = 1; + } + } /* End of FOR loop */ + } +} + + +int pciehp_enable_slot(struct slot *p_slot) +{ + u8 getstatus = 0; + int rc; + struct pci_func *func; + + func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); + if (!func) { + dbg("%s: Error! slot NULL\n", __FUNCTION__); + return 1; + } + + /* Check to see if (latch closed, card present, power off) */ + down(&p_slot->ctrl->crit_sect); + + rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (rc || !getstatus) { + info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + if (MRL_SENS(p_slot->ctrl->ctrlcap)) { + rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + if (rc || getstatus) { + info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + } + + if (POWER_CTRL(p_slot->ctrl->ctrlcap)) { + rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (rc || getstatus) { + info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + } + up(&p_slot->ctrl->crit_sect); + + slot_remove(func); + + func = pciehp_slot_create(p_slot->bus); + if (func == NULL) + return 1; + + func->bus = p_slot->bus; + func->device = p_slot->device; + func->function = 0; + func->configured = 0; + func->is_a_board = 1; + + /* We have to save the presence info for these slots */ + p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + func->switch_save = !getstatus? 0x10:0; + + rc = board_added(func, p_slot->ctrl); + if (rc) { + if (is_bridge(func)) + bridge_slot_remove(func); + else + slot_remove(func); + + /* Setup slot structure with entry for empty slot */ + func = pciehp_slot_create(p_slot->bus); + if (func == NULL) + return 1; /* Out of memory */ + + func->bus = p_slot->bus; + func->device = p_slot->device; + func->function = 0; + func->configured = 0; + func->is_a_board = 1; + + /* We have to save the presence info for these slots */ + p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + func->switch_save = !getstatus? 0x10:0; + } + + if (p_slot) + update_slot_info(p_slot); + + return rc; +} + + +int pciehp_disable_slot(struct slot *p_slot) +{ + u8 class_code, header_type, BCR; + u8 index = 0; + u8 getstatus = 0; + u32 rc = 0; + int ret = 0; + unsigned int devfn; + struct pci_bus *pci_bus = p_slot->ctrl->pci_dev->subordinate; + struct pci_func *func; + + if (!p_slot->ctrl) + return 1; + + /* Check to see if (latch closed, card present, power on) */ + down(&p_slot->ctrl->crit_sect); + + if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) { + ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (ret || !getstatus) { + info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + } + + if (MRL_SENS(p_slot->ctrl->ctrlcap)) { + ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + if (ret || getstatus) { + info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + } + + if (POWER_CTRL(p_slot->ctrl->ctrlcap)) { + ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (ret || !getstatus) { + info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number); + up(&p_slot->ctrl->crit_sect); + return 1; + } + } + + up(&p_slot->ctrl->crit_sect); + + func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); + + /* Make sure there are no video controllers here + * for all func of p_slot + */ + while (func && !rc) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Check the Class Code */ + rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); + if (rc) + return rc; + + if (class_code == PCI_BASE_CLASS_DISPLAY) { + /* Display/Video adapter (not supported) */ + rc = REMOVE_NOT_SUPPORTED; + } else { + /* See if it's a bridge */ + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; + + /* If it's a bridge, check the VGA Enable bit */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); + if (rc) + return rc; + + /* If the VGA Enable bit is set, remove isn't supported */ + if (BCR & PCI_BRIDGE_CTL_VGA) { + rc = REMOVE_NOT_SUPPORTED; + } + } + } + + func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); + } + + func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); + if ((func != NULL) && !rc) { + rc = remove_board(func, p_slot->ctrl); + } else if (!rc) + rc = 1; + + if (p_slot) + update_slot_info(p_slot); + + return rc; +} + + +/** + * configure_new_device - Configures the PCI header information of one board. + * + * @ctrl: pointer to controller structure + * @func: pointer to function structure + * @behind_bridge: 1 if this is a recursive call, 0 if not + * @resources: pointer to set of resource lists + * + * Returns 0 if success + * + */ +static u32 configure_new_device(struct controller * ctrl, struct pci_func * func, + u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev) +{ + u8 temp_byte, function, max_functions, stop_it; + int rc; + u32 ID; + struct pci_func *new_slot; + struct pci_bus lpci_bus, *pci_bus; + int index; + + new_slot = func; + + dbg("%s\n", __FUNCTION__); + memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); + pci_bus = &lpci_bus; + pci_bus->number = func->bus; + + /* Check for Multi-function device */ + rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte); + if (rc) { + dbg("%s: rc = %d\n", __FUNCTION__, rc); + return rc; + } + + if (temp_byte & 0x80) /* Multi-function device */ + max_functions = 8; + else + max_functions = 1; + + function = 0; + + do { + rc = configure_new_function(ctrl, new_slot, behind_bridge, + resources, bridge_bus, bridge_dev); + + if (rc) { + dbg("configure_new_function failed: %d\n", rc); + index = 0; + + while (new_slot) { + new_slot = pciehp_slot_find(new_slot->bus, + new_slot->device, index++); + + if (new_slot) + pciehp_return_board_resources(new_slot, + resources); + } + + return rc; + } + + function++; + + stop_it = 0; + + /* The following loop skips to the next present function + * and creates a board structure + */ + + while ((function < max_functions) && (!stop_it)) { + pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID); + + if (ID == 0xFFFFFFFF) { /* There's nothing there. */ + function++; + } else { /* There's something there */ + /* Setup slot structure. */ + new_slot = pciehp_slot_create(func->bus); + + if (new_slot == NULL) { + /* Out of memory */ + return 1; + } + + new_slot->bus = func->bus; + new_slot->device = func->device; + new_slot->function = function; + new_slot->is_a_board = 1; + new_slot->status = 0; + + stop_it++; + } + } + + } while (function < max_functions); + dbg("returning from %s\n", __FUNCTION__); + + return 0; +} + +/* + * Configuration logic that involves the hotplug data structures and + * their bookkeeping + */ + +/** + * configure_bridge: fill bridge's registers, either configure or disable it. + */ +static int +configure_bridge(struct pci_bus *pci_bus, unsigned int devfn, + struct pci_resource *mem_node, + struct pci_resource **hold_mem_node, + int base_addr, int limit_addr) +{ + u16 temp_word; + u32 rc; + + if (mem_node) { + memcpy(*hold_mem_node, mem_node, sizeof(struct pci_resource)); + mem_node->next = NULL; + + /* set Mem base and Limit registers */ + RES_CHECK(mem_node->base, 16); + temp_word = (u16)(mem_node->base >> 16); + rc = pci_bus_write_config_word(pci_bus, devfn, base_addr, temp_word); + + RES_CHECK(mem_node->base + mem_node->length - 1, 16); + temp_word = (u16)((mem_node->base + mem_node->length - 1) >> 16); + rc = pci_bus_write_config_word(pci_bus, devfn, limit_addr, temp_word); + } else { + temp_word = 0xFFFF; + rc = pci_bus_write_config_word(pci_bus, devfn, base_addr, temp_word); + + temp_word = 0x0000; + rc = pci_bus_write_config_word(pci_bus, devfn, limit_addr, temp_word); + + kfree(*hold_mem_node); + *hold_mem_node = NULL; + } + return rc; +} + +static int +configure_new_bridge(struct controller *ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources, + struct pci_bus *pci_bus) +{ + int cloop; + u8 temp_byte; + u8 device; + u16 temp_word; + u32 rc; + u32 ID; + unsigned int devfn; + struct pci_resource *mem_node; + struct pci_resource *p_mem_node; + struct pci_resource *io_node; + struct pci_resource *bus_node; + struct pci_resource *hold_mem_node; + struct pci_resource *hold_p_mem_node; + struct pci_resource *hold_IO_node; + struct pci_resource *hold_bus_node; + struct irq_mapping irqs; + struct pci_func *new_slot; + struct resource_lists temp_resources; + + devfn = PCI_DEVFN(func->device, func->function); + + /* set Primary bus */ + dbg("set Primary bus = 0x%x\n", func->bus); + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus); + if (rc) + return rc; + + /* find range of busses to use */ + bus_node = get_max_resource(&resources->bus_head, 1L); + + /* If we don't have any busses to allocate, we can't continue */ + if (!bus_node) { + err("Got NO bus resource to use\n"); + return -ENOMEM; + } + dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length); + + /* set Secondary bus */ + temp_byte = (u8)bus_node->base; + dbg("set Secondary bus = 0x%x\n", temp_byte); + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte); + if (rc) + return rc; + + /* set subordinate bus */ + temp_byte = (u8)(bus_node->base + bus_node->length - 1); + dbg("set subordinate bus = 0x%x\n", temp_byte); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); + if (rc) + return rc; + + /* Set HP parameters (Cache Line Size, Latency Timer) */ + rc = pciehprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE); + if (rc) + return rc; + + /* Setup the IO, memory, and prefetchable windows */ + + io_node = get_max_resource(&(resources->io_head), 0x1000L); + if (io_node) { + dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base, + io_node->length, io_node->next); + } + + mem_node = get_max_resource(&(resources->mem_head), 0x100000L); + if (mem_node) { + dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base, + mem_node->length, mem_node->next); + } + + if (resources->p_mem_head) + p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L); + else { + /* + * In some platform implementation, MEM and PMEM are not + * distinguished, and hence ACPI _CRS has only MEM entries + * for both MEM and PMEM. + */ + dbg("using MEM for PMEM\n"); + p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L); + } + if (p_mem_node) { + dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base, + p_mem_node->length, p_mem_node->next); + } + + /* set up the IRQ info */ + if (!resources->irqs) { + irqs.barber_pole = 0; + irqs.interrupt[0] = 0; + irqs.interrupt[1] = 0; + irqs.interrupt[2] = 0; + irqs.interrupt[3] = 0; + irqs.valid_INT = 0; + } else { + irqs.barber_pole = resources->irqs->barber_pole; + irqs.interrupt[0] = resources->irqs->interrupt[0]; + irqs.interrupt[1] = resources->irqs->interrupt[1]; + irqs.interrupt[2] = resources->irqs->interrupt[2]; + irqs.interrupt[3] = resources->irqs->interrupt[3]; + irqs.valid_INT = resources->irqs->valid_INT; + } + + /* set up resource lists that are now aligned on top and bottom + * for anything behind the bridge. + */ + temp_resources.bus_head = bus_node; + temp_resources.io_head = io_node; + temp_resources.mem_head = mem_node; + temp_resources.p_mem_head = p_mem_node; + temp_resources.irqs = &irqs; + + /* Make copies of the nodes we are going to pass down so that + * if there is a problem,we can just use these to free resources + */ + hold_bus_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); + hold_IO_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); + hold_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); + hold_p_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); + + if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) { + kfree(hold_bus_node); + kfree(hold_IO_node); + kfree(hold_mem_node); + kfree(hold_p_mem_node); + + return 1; + } + + memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource)); + + bus_node->base += 1; + bus_node->length -= 1; + bus_node->next = NULL; + + /* If we have IO resources copy them and fill in the bridge's + * IO range registers + */ + if (io_node) { + memcpy(hold_IO_node, io_node, sizeof(struct pci_resource)); + io_node->next = NULL; + + /* set IO base and Limit registers */ + RES_CHECK(io_node->base, 8); + temp_byte = (u8)(io_node->base >> 8); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte); + + RES_CHECK(io_node->base + io_node->length - 1, 8); + temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte); + } else { + kfree(hold_IO_node); + hold_IO_node = NULL; + } + + /* If we have memory resources copy them and fill in the bridge's + * memory range registers. Otherwise, fill in the range + * registers with values that disable them. + */ + rc = configure_bridge(pci_bus, devfn, mem_node, &hold_mem_node, + PCI_MEMORY_BASE, PCI_MEMORY_LIMIT); + + /* If we have prefetchable memory resources copy them and + * fill in the bridge's memory range registers. Otherwise, + * fill in the range registers with values that disable them. + */ + rc = configure_bridge(pci_bus, devfn, p_mem_node, &hold_p_mem_node, + PCI_PREF_MEMORY_BASE, PCI_PREF_MEMORY_LIMIT); + + /* Adjust this to compensate for extra adjustment in first loop */ + irqs.barber_pole--; + + rc = 0; + + /* Here we actually find the devices and configure them */ + for (device = 0; (device <= 0x1F) && !rc; device++) { + irqs.barber_pole = (irqs.barber_pole + 1) & 0x03; + + ID = 0xFFFFFFFF; + pci_bus->number = hold_bus_node->base; + pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + pci_bus->number = func->bus; + + if (ID != 0xFFFFFFFF) { /* device Present */ + /* Setup slot structure. */ + new_slot = pciehp_slot_create(hold_bus_node->base); + + if (new_slot == NULL) { + /* Out of memory */ + rc = -ENOMEM; + continue; + } + + new_slot->bus = hold_bus_node->base; + new_slot->device = device; + new_slot->function = 0; + new_slot->is_a_board = 1; + new_slot->status = 0; + + rc = configure_new_device(ctrl, new_slot, 1, + &temp_resources, func->bus, + func->device); + dbg("configure_new_device rc=0x%x\n",rc); + } /* End of IF (device in slot?) */ + } /* End of FOR loop */ + + if (rc) { + pciehp_destroy_resource_list(&temp_resources); + + return_resource(&(resources->bus_head), hold_bus_node); + return_resource(&(resources->io_head), hold_IO_node); + return_resource(&(resources->mem_head), hold_mem_node); + return_resource(&(resources->p_mem_head), hold_p_mem_node); + return(rc); + } + + /* save the interrupt routing information */ + if (resources->irqs) { + resources->irqs->interrupt[0] = irqs.interrupt[0]; + resources->irqs->interrupt[1] = irqs.interrupt[1]; + resources->irqs->interrupt[2] = irqs.interrupt[2]; + resources->irqs->interrupt[3] = irqs.interrupt[3]; + resources->irqs->valid_INT = irqs.valid_INT; + } else if (!behind_bridge) { + /* We need to hook up the interrupts here */ + for (cloop = 0; cloop < 4; cloop++) { + if (irqs.valid_INT & (0x01 << cloop)) { + rc = pciehp_set_irq(func->bus, func->device, + 0x0A + cloop, irqs.interrupt[cloop]); + if (rc) { + pciehp_destroy_resource_list (&temp_resources); + return_resource(&(resources->bus_head), hold_bus_node); + return_resource(&(resources->io_head), hold_IO_node); + return_resource(&(resources->mem_head), hold_mem_node); + return_resource(&(resources->p_mem_head), hold_p_mem_node); + return rc; + } + } + } /* end of for loop */ + } + + /* Return unused bus resources + * First use the temporary node to store information for the board + */ + if (hold_bus_node && bus_node && temp_resources.bus_head) { + hold_bus_node->length = bus_node->base - hold_bus_node->base; + + hold_bus_node->next = func->bus_head; + func->bus_head = hold_bus_node; + + temp_byte = (u8)(temp_resources.bus_head->base - 1); + + /* set subordinate bus */ + dbg("re-set subordinate bus = 0x%x\n", temp_byte); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); + + if (temp_resources.bus_head->length == 0) { + kfree(temp_resources.bus_head); + temp_resources.bus_head = NULL; + } else { + dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n", + func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length); + return_resource(&(resources->bus_head), temp_resources.bus_head); + } + } + + /* If we have IO space available and there is some left, + * return the unused portion + */ + if (hold_IO_node && temp_resources.io_head) { + io_node = do_pre_bridge_resource_split(&(temp_resources.io_head), + &hold_IO_node, 0x1000); + + /* Check if we were able to split something off */ + if (io_node) { + hold_IO_node->base = io_node->base + io_node->length; + + RES_CHECK(hold_IO_node->base, 8); + temp_byte = (u8)((hold_IO_node->base) >> 8); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte); + + return_resource(&(resources->io_head), io_node); + } + + io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000); + + /* Check if we were able to split something off */ + if (io_node) { + /* First use the temporary node to store information for the board */ + hold_IO_node->length = io_node->base - hold_IO_node->base; + + /* If we used any, add it to the board's list */ + if (hold_IO_node->length) { + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + + RES_CHECK(io_node->base - 1, 8); + temp_byte = (u8)((io_node->base - 1) >> 8); + rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte); + + return_resource(&(resources->io_head), io_node); + } else { + /* it doesn't need any IO */ + temp_byte = 0x00; + rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); + + return_resource(&(resources->io_head), io_node); + kfree(hold_IO_node); + } + } else { + /* it used most of the range */ + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + } + } else if (hold_IO_node) { + /* it used the whole range */ + hold_IO_node->next = func->io_head; + func->io_head = hold_IO_node; + } + + /* If we have memory space available and there is some left, + * return the unused portion + */ + if (hold_mem_node && temp_resources.mem_head) { + mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L); + + /* Check if we were able to split something off */ + if (mem_node) { + hold_mem_node->base = mem_node->base + mem_node->length; + + RES_CHECK(hold_mem_node->base, 16); + temp_word = (u16)((hold_mem_node->base) >> 16); + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word); + + return_resource(&(resources->mem_head), mem_node); + } + + mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L); + + /* Check if we were able to split something off */ + if (mem_node) { + /* First use the temporary node to store information for the board */ + hold_mem_node->length = mem_node->base - hold_mem_node->base; + + if (hold_mem_node->length) { + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + + /* configure end address */ + RES_CHECK(mem_node->base - 1, 16); + temp_word = (u16)((mem_node->base - 1) >> 16); + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + + /* Return unused resources to the pool */ + return_resource(&(resources->mem_head), mem_node); + } else { + /* it doesn't need any Mem */ + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->mem_head), mem_node); + kfree(hold_mem_node); + } + } else { + /* it used most of the range */ + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + } + } else if (hold_mem_node) { + /* it used the whole range */ + hold_mem_node->next = func->mem_head; + func->mem_head = hold_mem_node; + } + + /* If we have prefetchable memory space available and there is some + * left at the end, return the unused portion + */ + if (hold_p_mem_node && temp_resources.p_mem_head) { + p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head), + &hold_p_mem_node, 0x100000L); + + /* Check if we were able to split something off */ + if (p_mem_node) { + hold_p_mem_node->base = p_mem_node->base + p_mem_node->length; + + RES_CHECK(hold_p_mem_node->base, 16); + temp_word = (u16)((hold_p_mem_node->base) >> 16); + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + } + + p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L); + + /* Check if we were able to split something off */ + if (p_mem_node) { + /* First use the temporary node to store information for the board */ + hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base; + + /* If we used any, add it to the board's list */ + if (hold_p_mem_node->length) { + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + + RES_CHECK(p_mem_node->base - 1, 16); + temp_word = (u16)((p_mem_node->base - 1) >> 16); + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + } else { + /* it doesn't need any PMem */ + temp_word = 0x0000; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); + + return_resource(&(resources->p_mem_head), p_mem_node); + kfree(hold_p_mem_node); + } + } else { + /* it used the most of the range */ + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + } + } else if (hold_p_mem_node) { + /* it used the whole range */ + hold_p_mem_node->next = func->p_mem_head; + func->p_mem_head = hold_p_mem_node; + } + + /* We should be configuring an IRQ and the bridge's base address + * registers if it needs them. Although we have never seen such + * a device + */ + + pciehprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE); + + dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); + + return rc; +} + +/** + * configure_new_function - Configures the PCI header information of one device + * + * @ctrl: pointer to controller structure + * @func: pointer to function structure + * @behind_bridge: 1 if this is a recursive call, 0 if not + * @resources: pointer to set of resource lists + * + * Calls itself recursively for bridged devices. + * Returns 0 if success + * + */ +static int +configure_new_function(struct controller *ctrl, struct pci_func *func, + u8 behind_bridge, struct resource_lists *resources, + u8 bridge_bus, u8 bridge_dev) +{ + int cloop; + u8 temp_byte; + u8 class_code; + u16 temp_word; + u32 rc; + u32 temp_register; + u32 base; + unsigned int devfn; + struct pci_resource *mem_node; + struct pci_resource *io_node; + struct pci_bus lpci_bus, *pci_bus; + + memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); + pci_bus = &lpci_bus; + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Check for Bridge */ + rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte); + if (rc) + return rc; + dbg("%s: bus %x dev %x func %x temp_byte = %x\n", __FUNCTION__, + func->bus, func->device, func->function, temp_byte); + + if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ + rc = configure_new_bridge(ctrl, func, behind_bridge, resources, + pci_bus); + + if (rc) + return rc; + } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) { + /* Standard device */ + u64 base64; + rc = pci_bus_read_config_byte(pci_bus, devfn, 0x0B, &class_code); + + if (class_code == PCI_BASE_CLASS_DISPLAY) + return DEVICE_TYPE_NOT_SUPPORTED; + + /* Figure out IO and memory needs */ + for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) { + temp_register = 0xFFFFFFFF; + + rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); + rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register); + dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, + func->bus, func->device, func->function); + + if (!temp_register) + continue; + + base64 = 0L; + if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) { + /* Map IO */ + + /* set base = amount of IO space */ + base = temp_register & 0xFFFFFFFC; + base = ~base + 1; + + dbg("NEED IO length(0x%x)\n", base); + io_node = get_io_resource(&(resources->io_head),(ulong)base); + + /* allocate the resource to the board */ + if (io_node) { + dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length); + base = (u32)io_node->base; + io_node->next = func->io_head; + func->io_head = io_node; + } else { + err("Got NO IO resource(length=0x%x)\n", base); + return -ENOMEM; + } + } else { /* map MEM */ + int prefetchable = 1; + struct pci_resource **res_node = &func->p_mem_head; + char *res_type_str = "PMEM"; + u32 temp_register2; + + if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) { + prefetchable = 0; + res_node = &func->mem_head; + res_type_str++; + } + + base = temp_register & 0xFFFFFFF0; + base = ~base + 1; + + switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base); + + if (prefetchable && resources->p_mem_head) + mem_node=get_resource(&(resources->p_mem_head), (ulong)base); + else { + if (prefetchable) + dbg("using MEM for PMEM\n"); + mem_node = get_resource(&(resources->mem_head), (ulong)base); + } + + /* allocate the resource to the board */ + if (mem_node) { + base = (u32)mem_node->base; + mem_node->next = *res_node; + *res_node = mem_node; + dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base, + mem_node->length); + } else { + err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base); + return -ENOMEM; + } + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2); + dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2, + temp_register, base); + + if (prefetchable && resources->p_mem_head) + mem_node = get_resource(&(resources->p_mem_head), (ulong)base); + else { + if (prefetchable) + dbg("using MEM for PMEM\n"); + mem_node = get_resource(&(resources->mem_head), (ulong)base); + } + + /* allocate the resource to the board */ + if (mem_node) { + base64 = mem_node->base; + mem_node->next = *res_node; + *res_node = mem_node; + dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32), + (u32)base64, mem_node->length); + } else { + err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base); + return -ENOMEM; + } + break; + default: + dbg("reserved BAR type=0x%x\n", temp_register); + break; + } + + } + + if (base64) { + rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); + cloop += 4; + base64 >>= 32; + + if (base64) { + dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64); + base64 = 0x0L; + } + + rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); + } else { + rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base); + } + } /* End of base register loop */ + + /* disable ROM base Address */ + temp_word = 0x00L; + rc = pci_bus_write_config_word (pci_bus, devfn, PCI_ROM_ADDRESS, temp_word); + + /* Set HP parameters (Cache Line Size, Latency Timer) */ + rc = pciehprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL); + if (rc) + return rc; + + pciehprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL); + + dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, + func->function); + } /* End of Not-A-Bridge else */ + else { + /* It's some strange type of PCI adapter (Cardbus?) */ + return DEVICE_TYPE_NOT_SUPPORTED; + } + + func->configured = 1; + + return 0; +} |