diff options
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r-- | drivers/pci/pci.c | 602 |
1 files changed, 434 insertions, 168 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6d6120007af4..7b70312181d7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -20,8 +20,15 @@ #include <linux/pm_wakeup.h> #include <linux/interrupt.h> #include <asm/dma.h> /* isa_dma_bridge_buggy */ +#include <linux/device.h> +#include <asm/setup.h> #include "pci.h" +const char *pci_power_names[] = { + "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown", +}; +EXPORT_SYMBOL_GPL(pci_power_names); + unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS @@ -426,7 +433,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * given PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. - * @wait: If 'true', wait for the device to change its power state * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -435,12 +441,15 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) +static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) { u16 pmcsr; bool need_restore = false; + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + if (!dev->pm_cap) return -EIO; @@ -451,10 +460,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ - if (dev->current_state == state) { - /* we're already there */ - return 0; - } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold + if (state != PCI_D0 && dev->current_state <= PCI_D3cold && dev->current_state > state) { dev_err(&dev->dev, "invalid power transition " "(from state %d to %d)\n", dev->current_state, state); @@ -479,12 +485,12 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) pmcsr &= ~PCI_PM_CTRL_STATE_MASK; pmcsr |= state; break; + case PCI_D3hot: + case PCI_D3cold: case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) { + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) need_restore = true; - wait = true; - } /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -494,9 +500,6 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) /* enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - if (!wait) - return 0; - /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) @@ -521,7 +524,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) if (need_restore) pci_restore_bars(dev); - if (wait && dev->bus->self) + if (dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); return 0; @@ -546,11 +549,59 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) } /** + * pci_platform_power_transition - Use platform to change device power state + * @dev: PCI device to handle. + * @state: State to put the device into. + */ +static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) +{ + int error; + + if (platform_pci_power_manageable(dev)) { + error = platform_pci_set_power_state(dev, state); + if (!error) + pci_update_current_state(dev, state); + } else { + error = -ENODEV; + /* Fall back to PCI_D0 if native PM is not supported */ + if (!dev->pm_cap) + dev->current_state = PCI_D0; + } + + return error; +} + +/** + * __pci_start_power_transition - Start power transition of a PCI device + * @dev: PCI device to handle. + * @state: State to put the device into. + */ +static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) +{ + if (state == PCI_D0) + pci_platform_power_transition(dev, PCI_D0); +} + +/** + * __pci_complete_power_transition - Complete power transition of a PCI device + * @dev: PCI device to handle. + * @state: State to put the device into. + * + * This function should not be called directly by device drivers. + */ +int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state) +{ + return state > PCI_D0 ? + pci_platform_power_transition(dev, state) : -EINVAL; +} +EXPORT_SYMBOL_GPL(__pci_complete_power_transition); + +/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * - * Transition a device to a new power state, using the platform formware and/or + * Transition a device to a new power state, using the platform firmware and/or * the device's PCI PM registers. * * RETURN VALUE: @@ -577,30 +628,21 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - if (state == PCI_D0 && platform_pci_power_manageable(dev)) { - /* - * Allow the platform to change the state, for example via ACPI - * _PR0, _PS0 and some such, but do not trust it. - */ - int ret = platform_pci_set_power_state(dev, PCI_D0); - if (!ret) - pci_update_current_state(dev, PCI_D0); - } + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + + __pci_start_power_transition(dev, state); + /* This device is quirked not to be put into D3, so don't put it in D3 */ if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state, true); + error = pci_raw_set_power_state(dev, state); - if (state > PCI_D0 && platform_pci_power_manageable(dev)) { - /* Allow the platform to finalize the transition */ - int ret = platform_pci_set_power_state(dev, state); - if (!ret) { - pci_update_current_state(dev, state); - error = 0; - } - } + if (!__pci_complete_power_transition(dev, state)) + error = 0; return error; } @@ -645,11 +687,36 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) EXPORT_SYMBOL(pci_choose_state); +#define PCI_EXP_SAVE_REGS 7 + +#define pcie_cap_has_devctl(type, flags) 1 +#define pcie_cap_has_lnkctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + (type == PCI_EXP_TYPE_ROOT_PORT || \ + type == PCI_EXP_TYPE_ENDPOINT || \ + type == PCI_EXP_TYPE_LEG_END)) +#define pcie_cap_has_sltctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + ((type == PCI_EXP_TYPE_ROOT_PORT) || \ + (type == PCI_EXP_TYPE_DOWNSTREAM && \ + (flags & PCI_EXP_FLAGS_SLOT)))) +#define pcie_cap_has_rtctl(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ + (type == PCI_EXP_TYPE_ROOT_PORT || \ + type == PCI_EXP_TYPE_RC_EC)) +#define pcie_cap_has_devctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) +#define pcie_cap_has_lnkctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) +#define pcie_cap_has_sltctl2(type, flags) \ + ((flags & PCI_EXP_FLAGS_VERS) > 1) + static int pci_save_pcie_state(struct pci_dev *dev) { int pos, i = 0; struct pci_cap_saved_state *save_state; u16 *cap; + u16 flags; pos = pci_find_capability(dev, PCI_CAP_ID_EXP); if (pos <= 0) @@ -657,15 +724,27 @@ static int pci_save_pcie_state(struct pci_dev *dev) save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); if (!save_state) { - dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__); + dev_err(&dev->dev, "buffer not found in %s\n", __func__); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); - pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); + + if (pcie_cap_has_devctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]); + if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); + if (pcie_cap_has_sltctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); + if (pcie_cap_has_rtctl(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); + if (pcie_cap_has_devctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]); + if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]); + if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) + pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]); return 0; } @@ -675,6 +754,7 @@ static void pci_restore_pcie_state(struct pci_dev *dev) int i = 0, pos; struct pci_cap_saved_state *save_state; u16 *cap; + u16 flags; save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); pos = pci_find_capability(dev, PCI_CAP_ID_EXP); @@ -682,10 +762,22 @@ static void pci_restore_pcie_state(struct pci_dev *dev) return; cap = (u16 *)&save_state->data[0]; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); - pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); + + if (pcie_cap_has_devctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]); + if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); + if (pcie_cap_has_sltctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); + if (pcie_cap_has_rtctl(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); + if (pcie_cap_has_devctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]); + if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]); + if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) + pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]); } @@ -700,7 +792,7 @@ static int pci_save_pcix_state(struct pci_dev *dev) save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); if (!save_state) { - dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__); + dev_err(&dev->dev, "buffer not found in %s\n", __func__); return -ENOMEM; } @@ -754,6 +846,8 @@ pci_restore_state(struct pci_dev *dev) int i; u32 val; + if (!dev->state_saved) + return 0; /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); @@ -773,6 +867,7 @@ pci_restore_state(struct pci_dev *dev) } pci_restore_pcix_state(dev); pci_restore_msi_state(dev); + pci_restore_iov_state(dev); return 0; } @@ -801,7 +896,7 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) */ int pci_reenable_device(struct pci_dev *dev) { - if (atomic_read(&dev->enable_cnt)) + if (pci_is_enabled(dev)) return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1); return 0; } @@ -999,7 +1094,7 @@ static void do_pci_disable_device(struct pci_dev *dev) */ void pci_disable_enabled_device(struct pci_dev *dev) { - if (atomic_read(&dev->enable_cnt)) + if (pci_is_enabled(dev)) do_pci_disable_device(dev); } @@ -1117,7 +1212,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) +int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) { int error = 0; bool pme_done = false; @@ -1196,15 +1291,14 @@ pci_power_t pci_target_state(struct pci_dev *dev) default: target_state = state; } + } else if (!dev->pm_cap) { + target_state = PCI_D0; } else if (device_may_wakeup(&dev->dev)) { /* * Find the deepest state from which the device can generate * wake-up events, make it the target state and enable device * to generate PME#. */ - if (!dev->pm_cap) - return PCI_POWER_ERROR; - if (dev->pme_support) { while (target_state && !(dev->pme_support & (1 << target_state))) @@ -1231,7 +1325,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; - pci_enable_wake(dev, target_state, true); + pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); error = pci_set_power_state(dev, target_state); @@ -1369,7 +1463,8 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) { int error; - error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, 4 * sizeof(u16)); + error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, + PCI_EXP_SAVE_REGS * sizeof(u16)); if (error) dev_err(&dev->dev, "unable to preallocate PCI Express save buffer\n"); @@ -1381,50 +1476,6 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) } /** - * pci_restore_standard_config - restore standard config registers of PCI device - * @dev: PCI device to handle - * - * This function assumes that the device's configuration space is accessible. - * If the device needs to be powered up, the function will wait for it to - * change the state. - */ -int pci_restore_standard_config(struct pci_dev *dev) -{ - pci_power_t prev_state; - int error; - - pci_update_current_state(dev, PCI_D0); - - prev_state = dev->current_state; - if (prev_state == PCI_D0) - goto Restore; - - error = pci_raw_set_power_state(dev, PCI_D0, false); - if (error) - return error; - - /* - * This assumes that we won't get a bus in B2 or B3 from the BIOS, but - * we've made this assumption forever and it appears to be universally - * satisfied. - */ - switch(prev_state) { - case PCI_D3cold: - case PCI_D3hot: - mdelay(pci_pm_d3_delay); - break; - case PCI_D2: - udelay(PCI_PM_D2_DELAY); - break; - } - - pci_update_current_state(dev, PCI_D0); - - Restore: - return dev->state_saved ? pci_restore_state(dev) : 0; -} - -/** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device */ @@ -1468,11 +1519,20 @@ void pci_enable_ari(struct pci_dev *dev) * * Perform INTx swizzling for a device behind one level of bridge. This is * required by section 9.1 of the PCI-to-PCI bridge specification for devices - * behind bridges on add-in cards. + * behind bridges on add-in cards. For devices with ARI enabled, the slot + * number is always 0 (see the Implementation Note in section 2.2.8.1 of + * the PCI Express Base Specification, Revision 2.1) */ u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) { - return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1; + int slot; + + if (pci_ari_enabled(dev->bus)) + slot = 0; + else + slot = PCI_SLOT(dev->devfn); + + return (((pin - 1) + slot) % 4) + 1; } int @@ -1484,7 +1544,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge) if (!pin) return -1; - while (dev->bus->self) { + while (!pci_is_root_bus(dev->bus)) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -1504,7 +1564,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp) { u8 pin = *pinp; - while (dev->bus->self) { + while (!pci_is_root_bus(dev->bus)) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -2010,99 +2070,177 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask) EXPORT_SYMBOL(pci_set_dma_seg_boundary); #endif -static int __pcie_flr(struct pci_dev *dev, int probe) +static int pcie_flr(struct pci_dev *dev, int probe) { - u16 status; + int i; + int pos; u32 cap; - int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + u16 status; - if (!exppos) + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) return -ENOTTY; - pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + + pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); if (!(cap & PCI_EXP_DEVCAP_FLR)) return -ENOTTY; if (probe) return 0; - pci_block_user_cfg_access(dev); - /* Wait for Transaction Pending bit clean */ - msleep(100); - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (status & PCI_EXP_DEVSTA_TRPND) { - dev_info(&dev->dev, "Busy after 100ms while trying to reset; " - "sleeping for 1 second\n"); - ssleep(1); - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (status & PCI_EXP_DEVSTA_TRPND) - dev_info(&dev->dev, "Still busy after 1s; " - "proceeding with reset anyway\n"); + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto clear; } - pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL, + dev_err(&dev->dev, "transaction is not cleared; " + "proceeding with reset anyway\n"); + +clear: + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); - mdelay(100); + msleep(100); - pci_unblock_user_cfg_access(dev); return 0; } -static int __pci_af_flr(struct pci_dev *dev, int probe) +static int pci_af_flr(struct pci_dev *dev, int probe) { - int cappos = pci_find_capability(dev, PCI_CAP_ID_AF); - u8 status; + int i; + int pos; u8 cap; + u8 status; - if (!cappos) + pos = pci_find_capability(dev, PCI_CAP_ID_AF); + if (!pos) return -ENOTTY; - pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap); + + pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap); if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR)) return -ENOTTY; if (probe) return 0; - pci_block_user_cfg_access(dev); - /* Wait for Transaction Pending bit clean */ - msleep(100); - pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); - if (status & PCI_AF_STATUS_TP) { - dev_info(&dev->dev, "Busy after 100ms while trying to" - " reset; sleeping for 1 second\n"); - ssleep(1); - pci_read_config_byte(dev, - cappos + PCI_AF_STATUS, &status); - if (status & PCI_AF_STATUS_TP) - dev_info(&dev->dev, "Still busy after 1s; " - "proceeding with reset anyway\n"); + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status); + if (!(status & PCI_AF_STATUS_TP)) + goto clear; } - pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); - mdelay(100); - pci_unblock_user_cfg_access(dev); + dev_err(&dev->dev, "transaction is not cleared; " + "proceeding with reset anyway\n"); + +clear: + pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); + msleep(100); + + return 0; +} + +static int pci_pm_reset(struct pci_dev *dev, int probe) +{ + u16 csr; + + if (!dev->pm_cap) + return -ENOTTY; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr); + if (csr & PCI_PM_CTRL_NO_SOFT_RESET) + return -ENOTTY; + + if (probe) + return 0; + + if (dev->current_state != PCI_D0) + return -EINVAL; + + csr &= ~PCI_PM_CTRL_STATE_MASK; + csr |= PCI_D3hot; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); + msleep(pci_pm_d3_delay); + + csr &= ~PCI_PM_CTRL_STATE_MASK; + csr |= PCI_D0; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); + msleep(pci_pm_d3_delay); + + return 0; +} + +static int pci_parent_bus_reset(struct pci_dev *dev, int probe) +{ + u16 ctrl; + struct pci_dev *pdev; + + if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self) + return -ENOTTY; + + list_for_each_entry(pdev, &dev->bus->devices, bus_list) + if (pdev != dev) + return -ENOTTY; + + if (probe) + return 0; + + pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); + msleep(100); + + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); + msleep(100); + return 0; } -static int __pci_reset_function(struct pci_dev *pdev, int probe) +static int pci_dev_reset(struct pci_dev *dev, int probe) { - int res; + int rc; + + might_sleep(); + + if (!probe) { + pci_block_user_cfg_access(dev); + /* block PM suspend, driver probe, etc. */ + down(&dev->dev.sem); + } + + rc = pcie_flr(dev, probe); + if (rc != -ENOTTY) + goto done; + + rc = pci_af_flr(dev, probe); + if (rc != -ENOTTY) + goto done; - res = __pcie_flr(pdev, probe); - if (res != -ENOTTY) - return res; + rc = pci_pm_reset(dev, probe); + if (rc != -ENOTTY) + goto done; - res = __pci_af_flr(pdev, probe); - if (res != -ENOTTY) - return res; + rc = pci_parent_bus_reset(dev, probe); +done: + if (!probe) { + up(&dev->dev.sem); + pci_unblock_user_cfg_access(dev); + } - return res; + return rc; } /** - * pci_execute_reset_function() - Reset a PCI device function - * @dev: Device function to reset + * __pci_reset_function - reset a PCI device function + * @dev: PCI device to reset * * Some devices allow an individual function to be reset without affecting * other functions in the same device. The PCI device must be responsive @@ -2114,18 +2252,18 @@ static int __pci_reset_function(struct pci_dev *pdev, int probe) * device including MSI, bus mastering, BARs, decoding IO and memory spaces, * etc. * - * Returns 0 if the device function was successfully reset or -ENOTTY if the + * Returns 0 if the device function was successfully reset or negative if the * device doesn't support resetting a single function. */ -int pci_execute_reset_function(struct pci_dev *dev) +int __pci_reset_function(struct pci_dev *dev) { - return __pci_reset_function(dev, 0); + return pci_dev_reset(dev, 0); } -EXPORT_SYMBOL_GPL(pci_execute_reset_function); +EXPORT_SYMBOL_GPL(__pci_reset_function); /** - * pci_reset_function() - quiesce and reset a PCI device function - * @dev: Device function to reset + * pci_reset_function - quiesce and reset a PCI device function + * @dev: PCI device to reset * * Some devices allow an individual function to be reset without affecting * other functions in the same device. The PCI device must be responsive @@ -2133,32 +2271,33 @@ EXPORT_SYMBOL_GPL(pci_execute_reset_function); * * This function does not just reset the PCI portion of a device, but * clears all the state associated with the device. This function differs - * from pci_execute_reset_function in that it saves and restores device state + * from __pci_reset_function in that it saves and restores device state * over the reset. * - * Returns 0 if the device function was successfully reset or -ENOTTY if the + * Returns 0 if the device function was successfully reset or negative if the * device doesn't support resetting a single function. */ int pci_reset_function(struct pci_dev *dev) { - int r = __pci_reset_function(dev, 1); + int rc; - if (r < 0) - return r; + rc = pci_dev_reset(dev, 1); + if (rc) + return rc; - if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) - disable_irq(dev->irq); pci_save_state(dev); + /* + * both INTx and MSI are disabled after the Interrupt Disable bit + * is set and the Bus Master bit is cleared. + */ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); - r = pci_execute_reset_function(dev); + rc = pci_dev_reset(dev, 0); pci_restore_state(dev); - if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0) - enable_irq(dev->irq); - return r; + return rc; } EXPORT_SYMBOL_GPL(pci_reset_function); @@ -2346,18 +2485,140 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags) */ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) { + int reg; + if (resno < PCI_ROM_RESOURCE) { *type = pci_bar_unknown; return PCI_BASE_ADDRESS_0 + 4 * resno; } else if (resno == PCI_ROM_RESOURCE) { *type = pci_bar_mem32; return dev->rom_base_reg; + } else if (resno < PCI_BRIDGE_RESOURCES) { + /* device specific resource */ + reg = pci_iov_resource_bar(dev, resno, type); + if (reg) + return reg; } dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno); return 0; } +#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE +static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0}; +spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED; + +/** + * pci_specified_resource_alignment - get resource alignment specified by user. + * @dev: the PCI device to get + * + * RETURNS: Resource alignment if it is specified. + * Zero if it is not specified. + */ +resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) +{ + int seg, bus, slot, func, align_order, count; + resource_size_t align = 0; + char *p; + + spin_lock(&resource_alignment_lock); + p = resource_alignment_param; + while (*p) { + count = 0; + if (sscanf(p, "%d%n", &align_order, &count) == 1 && + p[count] == '@') { + p += count + 1; + } else { + align_order = -1; + } + if (sscanf(p, "%x:%x:%x.%x%n", + &seg, &bus, &slot, &func, &count) != 4) { + seg = 0; + if (sscanf(p, "%x:%x.%x%n", + &bus, &slot, &func, &count) != 3) { + /* Invalid format */ + printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n", + p); + break; + } + } + p += count; + if (seg == pci_domain_nr(dev->bus) && + bus == dev->bus->number && + slot == PCI_SLOT(dev->devfn) && + func == PCI_FUNC(dev->devfn)) { + if (align_order == -1) { + align = PAGE_SIZE; + } else { + align = 1 << align_order; + } + /* Found */ + break; + } + if (*p != ';' && *p != ',') { + /* End of param or invalid format */ + break; + } + p++; + } + spin_unlock(&resource_alignment_lock); + return align; +} + +/** + * pci_is_reassigndev - check if specified PCI is target device to reassign + * @dev: the PCI device to check + * + * RETURNS: non-zero for PCI device is a target device to reassign, + * or zero is not. + */ +int pci_is_reassigndev(struct pci_dev *dev) +{ + return (pci_specified_resource_alignment(dev) != 0); +} + +ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) +{ + if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1) + count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1; + spin_lock(&resource_alignment_lock); + strncpy(resource_alignment_param, buf, count); + resource_alignment_param[count] = '\0'; + spin_unlock(&resource_alignment_lock); + return count; +} + +ssize_t pci_get_resource_alignment_param(char *buf, size_t size) +{ + size_t count; + spin_lock(&resource_alignment_lock); + count = snprintf(buf, size, "%s", resource_alignment_param); + spin_unlock(&resource_alignment_lock); + return count; +} + +static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf) +{ + return pci_get_resource_alignment_param(buf, PAGE_SIZE); +} + +static ssize_t pci_resource_alignment_store(struct bus_type *bus, + const char *buf, size_t count) +{ + return pci_set_resource_alignment_param(buf, count); +} + +BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show, + pci_resource_alignment_store); + +static int __init pci_resource_alignment_sysfs_init(void) +{ + return bus_create_file(&pci_bus_type, + &bus_attr_resource_alignment); +} + +late_initcall(pci_resource_alignment_sysfs_init); + static void __devinit pci_no_domains(void) { #ifdef CONFIG_PCI_DOMAINS @@ -2406,6 +2667,11 @@ static int __init pci_setup(char *str) pci_cardbus_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "cbmemsize=", 10)) { pci_cardbus_mem_size = memparse(str + 10, &str); + } else if (!strncmp(str, "resource_alignment=", 19)) { + pci_set_resource_alignment_param(str + 19, + strlen(str + 19)); + } else if (!strncmp(str, "ecrc=", 5)) { + pcie_ecrc_get_policy(str + 5); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); |