diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 183 |
1 files changed, 172 insertions, 11 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 315fea47e784..5b548aee9cbc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,8 +19,8 @@ #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> #include <linux/interrupt.h> -#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include <linux/device.h> +#include <linux/pm_runtime.h> #include <asm/setup.h> #include "pci.h" @@ -29,6 +29,12 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); +int isa_dma_bridge_buggy; +EXPORT_SYMBOL(isa_dma_bridge_buggy); + +int pci_pci_problems; +EXPORT_SYMBOL(pci_pci_problems); + unsigned int pci_pm_d3_delay; static void pci_dev_d3_sleep(struct pci_dev *dev) @@ -380,10 +386,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) { const struct pci_bus *bus = dev->bus; int i; - struct resource *best = NULL; + struct resource *best = NULL, *r; - for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (!r) continue; if (res->start && !(res->start >= r->start && res->end <= r->end)) @@ -457,6 +462,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; } +static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->run_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1190,6 +1201,66 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) } /** + * pci_check_pme_status - Check if given device has generated PME. + * @dev: Device to check. + * + * Check the PME status of the device and if set, clear it and clear PME enable + * (if set). Return 'true' if PME status and PME enable were both set or + * 'false' otherwise. + */ +bool pci_check_pme_status(struct pci_dev *dev) +{ + int pmcsr_pos; + u16 pmcsr; + bool ret = false; + + if (!dev->pm_cap) + return false; + + pmcsr_pos = dev->pm_cap + PCI_PM_CTRL; + pci_read_config_word(dev, pmcsr_pos, &pmcsr); + if (!(pmcsr & PCI_PM_CTRL_PME_STATUS)) + return false; + + /* Clear PME status. */ + pmcsr |= PCI_PM_CTRL_PME_STATUS; + if (pmcsr & PCI_PM_CTRL_PME_ENABLE) { + /* Disable PME to avoid interrupt flood. */ + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + ret = true; + } + + pci_write_config_word(dev, pmcsr_pos, pmcsr); + + return ret; +} + +/** + * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. + * @dev: Device to handle. + * @ign: Ignored. + * + * Check if @dev has generated PME and queue a resume request for it in that + * case. + */ +static int pci_pme_wakeup(struct pci_dev *dev, void *ign) +{ + if (pci_check_pme_status(dev)) + pm_request_resume(&dev->dev); + return 0; +} + +/** + * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary. + * @bus: Top bus of the subtree to walk. + */ +void pci_pme_wakeup_bus(struct pci_bus *bus) +{ + if (bus) + pci_walk_bus(bus, pci_pme_wakeup, NULL); +} + +/** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. * @state: PCI state from which device will issue PME#. @@ -1230,9 +1301,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } /** - * pci_enable_wake - enable PCI device as wakeup event source + * __pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected * @state: PCI state from which device will issue wakeup events + * @runtime: True if the events are to be generated at run time * @enable: True to enable event generation; false to disable * * This enables the device as a wakeup event source, or disables it. @@ -1248,11 +1320,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable) * Error code depending on the platform is returned if both the platform and * the native mechanism fail to enable the generation of wake-up events */ -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable) { int ret = 0; - if (enable && !device_may_wakeup(&dev->dev)) + if (enable && !runtime && !device_may_wakeup(&dev->dev)) return -EINVAL; /* Don't do the same thing twice in a row for one device. */ @@ -1272,19 +1345,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) pci_pme_active(dev, true); else ret = 1; - error = platform_pci_sleep_wake(dev, true); + error = runtime ? platform_pci_run_wake(dev, true) : + platform_pci_sleep_wake(dev, true); if (ret) ret = error; if (!ret) dev->wakeup_prepared = true; } else { - platform_pci_sleep_wake(dev, false); + if (runtime) + platform_pci_run_wake(dev, false); + else + platform_pci_sleep_wake(dev, false); pci_pme_active(dev, false); dev->wakeup_prepared = false; } return ret; } +EXPORT_SYMBOL(__pci_enable_wake); /** * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold @@ -1394,6 +1472,66 @@ int pci_back_from_sleep(struct pci_dev *dev) } /** + * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend. + * @dev: PCI device being suspended. + * + * Prepare @dev to generate wake-up events at run time and put it into a low + * power state. + */ +int pci_finish_runtime_suspend(struct pci_dev *dev) +{ + pci_power_t target_state = pci_target_state(dev); + int error; + + if (target_state == PCI_POWER_ERROR) + return -EIO; + + __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev)); + + error = pci_set_power_state(dev, target_state); + + if (error) + __pci_enable_wake(dev, target_state, true, false); + + return error; +} + +/** + * pci_dev_run_wake - Check if device can generate run-time wake-up events. + * @dev: Device to check. + * + * Return true if the device itself is cabable of generating wake-up events + * (through the platform or using the native PCIe PME) or if the device supports + * PME and one of its upstream bridges can generate wake-up events. + */ +bool pci_dev_run_wake(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + + if (device_run_wake(&dev->dev)) + return true; + + if (!dev->pme_support) + return false; + + while (bus->parent) { + struct pci_dev *bridge = bus->self; + + if (device_run_wake(&bridge->dev)) + return true; + + bus = bus->parent; + } + + /* We have reached the root bus. */ + if (bus->bridge) + return device_run_wake(bus->bridge); + + return false; +} +EXPORT_SYMBOL_GPL(pci_dev_run_wake); + +/** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. */ @@ -1402,6 +1540,7 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; dev->pm_cap = 0; @@ -2615,6 +2754,23 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) return 0; } +/* Some architectures require additional programming to enable VGA */ +static arch_set_vga_state_t arch_set_vga_state; + +void __init pci_register_set_vga_state(arch_set_vga_state_t func) +{ + arch_set_vga_state = func; /* NULL disables */ +} + +static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, + unsigned int command_bits, bool change_bridge) +{ + if (arch_set_vga_state) + return arch_set_vga_state(dev, decode, command_bits, + change_bridge); + return 0; +} + /** * pci_set_vga_state - set VGA decode state on device and parents if requested * @dev: the PCI device @@ -2628,9 +2784,15 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, struct pci_bus *bus; struct pci_dev *bridge; u16 cmd; + int rc; WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)); + /* ARCH specific VGA enables */ + rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge); + if (rc) + return rc; + pci_read_config_word(dev, PCI_COMMAND, &cmd); if (decode == true) cmd |= command_bits; @@ -2845,6 +3007,7 @@ EXPORT_SYMBOL(pcim_pin_device); EXPORT_SYMBOL(pci_disable_device); EXPORT_SYMBOL(pci_find_capability); EXPORT_SYMBOL(pci_bus_find_capability); +EXPORT_SYMBOL(pci_register_set_vga_state); EXPORT_SYMBOL(pci_release_regions); EXPORT_SYMBOL(pci_request_regions); EXPORT_SYMBOL(pci_request_regions_exclusive); @@ -2871,10 +3034,8 @@ EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_pme_capable); EXPORT_SYMBOL(pci_pme_active); -EXPORT_SYMBOL(pci_enable_wake); EXPORT_SYMBOL(pci_wake_from_d3); EXPORT_SYMBOL(pci_target_state); EXPORT_SYMBOL(pci_prepare_to_sleep); EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); - |