diff options
Diffstat (limited to 'drivers/pci/quirks.c')
| -rw-r--r-- | drivers/pci/quirks.c | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index fb08bc951ac0..04618d4d7d74 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1518,6 +1518,63 @@ static void __devinit quirk_netmos(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +{ + u16 command; + u32 bar; + u8 __iomem *csr; + u8 cmd_hi; + + switch (dev->device) { + /* PCI IDs taken from drivers/net/e100.c */ + case 0x1029: + case 0x1030 ... 0x1034: + case 0x1038 ... 0x103E: + case 0x1050 ... 0x1057: + case 0x1059: + case 0x1064 ... 0x106B: + case 0x1091 ... 0x1095: + case 0x1209: + case 0x1229: + case 0x2449: + case 0x2459: + case 0x245D: + case 0x27DC: + break; + default: + return; + } + + /* + * Some firmware hands off the e100 with interrupts enabled, + * which can cause a flood of interrupts if packets are + * received before the driver attaches to the device. So + * disable all e100 interrupts here. The driver will + * re-enable them when it's ready. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); + + if (!(command & PCI_COMMAND_MEMORY) || !bar) + return; + + csr = ioremap(bar, 8); + if (!csr) { + printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", + pci_name(dev)); + return; + } + + cmd_hi = readb(csr + 3); + if (cmd_hi == 0) { + printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts " + "enabled, disabling\n", pci_name(dev)); + writeb(1, csr + 3); + } + + iounmap(csr); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { |