diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/bus.c | 81 | ||||
| -rw-r--r-- | drivers/pci/dmar.c | 5 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_acpi.c | 3 | ||||
| -rw-r--r-- | drivers/pci/pci-sysfs.c | 2 | ||||
| -rw-r--r-- | drivers/pci/proc.c | 1 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 44 |
7 files changed, 58 insertions, 79 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index f01e344cf4bd..98e6fdf34d30 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o +obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 003170ea2e39..69546e9213dd 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -64,77 +64,6 @@ void pci_bus_remove_resources(struct pci_bus *bus) } } -static bool pci_bus_resource_better(struct resource *res1, bool pos1, - struct resource *res2, bool pos2) -{ - /* If exactly one is positive decode, always prefer that one */ - if (pos1 != pos2) - return pos1 ? true : false; - - /* Prefer the one that contains the highest address */ - if (res1->end != res2->end) - return (res1->end > res2->end) ? true : false; - - /* Otherwise, prefer the one with highest "center of gravity" */ - if (res1->start != res2->start) - return (res1->start > res2->start) ? true : false; - - /* Otherwise, choose one arbitrarily (but consistently) */ - return (res1 > res2) ? true : false; -} - -static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res) -{ - struct pci_bus_resource *bus_res; - - /* - * This relies on the fact that pci_bus.resource[] refers to P2P or - * CardBus bridge base/limit registers, which are always positively - * decoded. The pci_bus.resources list contains host bridge or - * subtractively decoded resources. - */ - list_for_each_entry(bus_res, &bus->resources, list) { - if (bus_res->res == res) - return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ? - false : true; - } - return true; -} - -/* - * Find the next-best bus resource after the cursor "res". If the cursor is - * NULL, return the best resource. "Best" means that we prefer positive - * decode regions over subtractive decode, then those at higher addresses. - */ -static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus, - unsigned int type, - struct resource *res) -{ - bool res_pos, r_pos, prev_pos = false; - struct resource *r, *prev = NULL; - int i; - - res_pos = pci_bus_resource_positive(bus, res); - pci_bus_for_each_resource(bus, r, i) { - if (!r) - continue; - - if ((r->flags & IORESOURCE_TYPE_BITS) != type) - continue; - - r_pos = pci_bus_resource_positive(bus, r); - if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) { - if (!prev || pci_bus_resource_better(r, r_pos, - prev, prev_pos)) { - prev = r; - prev_pos = r_pos; - } - } - } - - return prev; -} - /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus @@ -160,10 +89,9 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t), void *alignf_data) { - int ret = -ENOMEM; + int i, ret = -ENOMEM; struct resource *r; resource_size_t max = -1; - unsigned int type = res->flags & IORESOURCE_TYPE_BITS; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; @@ -171,9 +99,10 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, if (!(res->flags & IORESOURCE_MEM_64)) max = PCIBIOS_MAX_MEM_32; - /* Look for space at highest addresses first */ - r = pci_bus_find_resource_prev(bus, type, NULL); - for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) { + pci_bus_for_each_resource(bus, r, i) { + if (!r) + continue; + /* type_mask must match */ if ((res->flags ^ r->flags) & type_mask) continue; diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 0157708d474d..09933eb9126b 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -1417,6 +1417,11 @@ int __init enable_drhd_fault_handling(void) (unsigned long long)drhd->reg_base_addr, ret); return -1; } + + /* + * Clear any previous faults. + */ + dmar_fault(iommu->irq, iommu); } return 0; diff --git a/drivers/pci/hotplug/pciehp_acpi.c b/drivers/pci/hotplug/pciehp_acpi.c index 2574700db461..5f7226223a62 100644 --- a/drivers/pci/hotplug/pciehp_acpi.c +++ b/drivers/pci/hotplug/pciehp_acpi.c @@ -115,7 +115,8 @@ static struct pcie_port_service_driver __initdata dummy_driver = { static int __init select_detection_mode(void) { struct dummy_slot *slot, *tmp; - pcie_port_service_register(&dummy_driver); + if (pcie_port_service_register(&dummy_driver)) + return PCIEHP_DETECT_ACPI; pcie_port_service_unregister(&dummy_driver); list_for_each_entry_safe(slot, tmp, &dummy_slots, list) { list_del(&slot->list); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 95712a375cd5..63d5042f2079 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -715,7 +715,7 @@ int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma, nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; start = vma->vm_pgoff; size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; - pci_start = (mmap_api == PCI_MMAP_SYSFS) ? + pci_start = (mmap_api == PCI_MMAP_PROCFS) ? pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; if (start >= pci_start && start < pci_start + size && start + nr <= pci_start + size) diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index ea00647f4732..27911b55c2a5 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -10,7 +10,6 @@ #include <linux/module.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <linux/capability.h> #include <asm/uaccess.h> #include <asm/byteorder.h> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5c63fe9db5c..53a786fd0d40 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); +#ifdef CONFIG_TILE +/* + * The Tilera TILEmpower platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILE */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting @@ -2311,6 +2329,9 @@ static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev) { u32 cfg; + if (!pci_find_capability(dev, PCI_CAP_ID_HT)) + return; + pci_read_config_dword(dev, 0x74, &cfg); if (cfg & ((1 << 2) | (1 << 15))) { @@ -2746,6 +2767,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_m DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ +#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) +#define VTUNCERRMSK_REG 0x1ac +#define VTD_MSK_SPEC_ERRORS (1 << 31) +/* + * This is a quirk for masking vt-d spec defined errors to platform error + * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based + * on the RAS config settings of the platform) when a vt-d fault happens. + * The resulting SMI caused the system to hang. + * + * VT-d spec related errors are already handled by the VT-d OS code, so no + * need to report the same error through other channels. + */ +static void vtd_mask_spec_errors(struct pci_dev *dev) +{ + u32 word; + + pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); + pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); +#endif static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) |