diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/host/pci-imx6.c | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 1176bddee1cc..5634a33ea642 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -48,6 +48,8 @@ struct imx6_pcie { #define PL_OFFSET 0x700 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) +#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29) +#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4) #define PCIE_PHY_CTRL (PL_OFFSET + 0x114) #define PCIE_PHY_CTRL_DATA_LOC 0 @@ -338,10 +340,17 @@ static int imx6_pcie_link_up(struct pcie_port *pp) { u32 rc, ltssm, rx_valid, temp; - /* link is debug bit 36, debug register 1 starts at bit 32 */ - rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32)); - if (rc) - return -EAGAIN; + /* + * Test if the PHY reports that the link is up and also that + * the link training finished. It might happen that the PHY + * reports the link is already up, but the link training bit + * is still set, so make sure to check the training is done + * as well here. + */ + rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1); + if ((rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) && + !(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING)) + return 1; /* * From L0, initiate MAC entry to gen2 if EP/RC supports gen2. |