summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/Kconfig33
-rw-r--r--drivers/phy/Makefile3
-rw-r--r--drivers/phy/phy-bcm-ns-usb2.c137
-rw-r--r--drivers/phy/phy-brcm-sata.c412
-rw-r--r--drivers/phy/phy-brcmstb-sata.c250
-rw-r--r--drivers/phy/phy-exynos-mipi-video.c321
-rw-r--r--drivers/phy/phy-mt65xx-usb3.c77
-rw-r--r--drivers/phy/phy-rcar-gen2.c1
-rw-r--r--drivers/phy/phy-rcar-gen3-usb2.c88
-rw-r--r--drivers/phy/phy-rockchip-usb.c2
10 files changed, 952 insertions, 372 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 27e5f6ee9a2a..b869b98835f4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,6 +15,15 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
+config PHY_BCM_NS_USB2
+ tristate "Broadcom Northstar USB 2.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
+ controller on Northstar family.
+
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@@ -113,14 +122,15 @@ config PHY_MIPHY365X
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_SHMOBILE
+ depends on ARCH_RENESAS
depends on GENERIC_PHY
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
config PHY_RCAR_GEN3_USB2
tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on OF && ARCH_SHMOBILE
+ depends on ARCH_RENESAS
+ depends on EXTCON
select GENERIC_PHY
help
Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
@@ -218,9 +228,8 @@ config PHY_MT65XX_USB3
depends on ARCH_MEDIATEK && OF
select GENERIC_PHY
help
- Say 'Y' here to add support for Mediatek USB3.0 PHY driver
- for mt65xx SoCs. it supports two usb2.0 ports and
- one usb3.0 port.
+ Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
+ it supports multiple usb2.0 and usb3.0 ports.
config PHY_HI6220_USB
tristate "hi6220 USB PHY support"
@@ -250,7 +259,8 @@ config PHY_SUN9I_USB
tristate "Allwinner sun9i SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
depends on RESET_CONTROLLER
- depends on USB_COMMON
+ depends on USB_SUPPORT
+ select USB_COMMON
select GENERIC_PHY
help
Enable this to support the transceiver that is part of Allwinner
@@ -403,14 +413,15 @@ config PHY_TUSB1210
help
Support for TI TUSB1210 USB ULPI PHY.
-config PHY_BRCMSTB_SATA
- tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
+config PHY_BRCM_SATA
+ tristate "Broadcom SATA PHY driver"
+ depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
depends on OF
select GENERIC_PHY
+ default ARCH_BCM_IPROC
help
- Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
- Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+ Enable this to support the Broadcom SATA PHY.
+ If unsure, say N.
config PHY_CYGNUS_PCIE
tristate "Broadcom Cygnus PCIe PHY driver"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d4f06e69fd9a..9c3e73ccabc4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
@@ -49,7 +50,7 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
+obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c
new file mode 100644
index 000000000000..95ab6b2a0de5
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb2.c
@@ -0,0 +1,137 @@
+/*
+ * Broadcom Northstar USB 2.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct bcm_ns_usb2 {
+ struct device *dev;
+ struct clk *ref_clk;
+ struct phy *phy;
+ void __iomem *dmu;
+};
+
+static int bcm_ns_usb2_phy_init(struct phy *phy)
+{
+ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
+ struct device *dev = usb2->dev;
+ void __iomem *dmu = usb2->dmu;
+ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
+ int err = 0;
+
+ err = clk_prepare_enable(usb2->ref_clk);
+ if (err < 0) {
+ dev_err(dev, "Failed to prepare ref clock: %d\n", err);
+ goto err_out;
+ }
+
+ ref_clk_rate = clk_get_rate(usb2->ref_clk);
+ if (!ref_clk_rate) {
+ dev_err(dev, "Failed to get ref clock rate\n");
+ err = -EINVAL;
+ goto err_clk_off;
+ }
+
+ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
+ usb_pll_pdiv = usb2ctl;
+ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
+ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
+ } else {
+ usb_pll_pdiv = 1 << 3;
+ }
+
+ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
+ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
+
+ /* Unlock DMU PLL settings with some magic value */
+ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+ /* Write USB 2.0 PLL control setting */
+ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
+ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
+ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+ /* Lock DMU PLL settings */
+ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+err_clk_off:
+ clk_disable_unprepare(usb2->ref_clk);
+err_out:
+ return err;
+}
+
+static const struct phy_ops ops = {
+ .init = bcm_ns_usb2_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int bcm_ns_usb2_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm_ns_usb2 *usb2;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+
+ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
+ if (!usb2)
+ return -ENOMEM;
+ usb2->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
+ usb2->dmu = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb2->dmu)) {
+ dev_err(dev, "Failed to map DMU regs\n");
+ return PTR_ERR(usb2->dmu);
+ }
+
+ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
+ if (IS_ERR(usb2->ref_clk)) {
+ dev_err(dev, "Clock not defined\n");
+ return PTR_ERR(usb2->ref_clk);
+ }
+
+ usb2->phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ phy_set_drvdata(usb2->phy, usb2);
+ platform_set_drvdata(pdev, usb2);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id bcm_ns_usb2_id_table[] = {
+ { .compatible = "brcm,ns-usb2-phy", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
+
+static struct platform_driver bcm_ns_usb2_driver = {
+ .probe = bcm_ns_usb2_probe,
+ .driver = {
+ .name = "bcm_ns_usb2",
+ .of_match_table = bcm_ns_usb2_id_table,
+ },
+};
+module_platform_driver(bcm_ns_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c
new file mode 100644
index 000000000000..6c4c5cb791ca
--- /dev/null
+++ b/drivers/phy/phy-brcm-sata.c
@@ -0,0 +1,412 @@
+/*
+ * Broadcom SATA3 AHCI Controller PHY Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define SATA_PCB_BANK_OFFSET 0x23c
+#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4)
+
+#define MAX_PORTS 2
+
+/* Register offset between PHYs in PCB space */
+#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000
+
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10
+
+/* Register offset between PHYs in PHY control space */
+#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8
+
+enum brcm_sata_phy_version {
+ BRCM_SATA_PHY_STB_28NM,
+ BRCM_SATA_PHY_STB_40NM,
+ BRCM_SATA_PHY_IPROC_NS2,
+};
+
+struct brcm_sata_port {
+ int portnum;
+ struct phy *phy;
+ struct brcm_sata_phy *phy_priv;
+ bool ssc_en;
+};
+
+struct brcm_sata_phy {
+ struct device *dev;
+ void __iomem *phy_base;
+ void __iomem *ctrl_base;
+ enum brcm_sata_phy_version version;
+
+ struct brcm_sata_port phys[MAX_PORTS];
+};
+
+enum sata_phy_regs {
+ BLOCK0_REG_BANK = 0x000,
+ BLOCK0_XGXSSTATUS = 0x81,
+ BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12),
+ BLOCK0_SPARE = 0x8d,
+ BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3,
+ BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1,
+
+ PLL_REG_BANK_0 = 0x050,
+ PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
+
+ PLL1_REG_BANK = 0x060,
+ PLL1_ACTRL2 = 0x82,
+ PLL1_ACTRL3 = 0x83,
+ PLL1_ACTRL4 = 0x84,
+
+ OOB_REG_BANK = 0x150,
+ OOB_CTRL1 = 0x80,
+ OOB_CTRL1_BURST_MAX_MASK = 0xf,
+ OOB_CTRL1_BURST_MAX_SHIFT = 12,
+ OOB_CTRL1_BURST_MIN_MASK = 0xf,
+ OOB_CTRL1_BURST_MIN_SHIFT = 8,
+ OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf,
+ OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4,
+ OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf,
+ OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0,
+ OOB_CTRL2 = 0x81,
+ OOB_CTRL2_SEL_ENA_SHIFT = 15,
+ OOB_CTRL2_SEL_ENA_RC_SHIFT = 14,
+ OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f,
+ OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8,
+ OOB_CTRL2_BURST_CNT_MASK = 0x3,
+ OOB_CTRL2_BURST_CNT_SHIFT = 6,
+ OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f,
+ OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0,
+
+ TXPMD_REG_BANK = 0x1a0,
+ TXPMD_CONTROL1 = 0x81,
+ TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
+ TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1),
+ TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82,
+ TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83,
+ TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
+ TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
+ TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
+};
+
+enum sata_phy_ctrl_regs {
+ PHY_CTRL_1 = 0x0,
+ PHY_CTRL_1_RESET = BIT(0),
+};
+
+static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
+{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ u32 size = 0;
+
+ switch (priv->version) {
+ case BRCM_SATA_PHY_STB_28NM:
+ case BRCM_SATA_PHY_IPROC_NS2:
+ size = SATA_PCB_REG_28NM_SPACE_SIZE;
+ break;
+ case BRCM_SATA_PHY_STB_40NM:
+ size = SATA_PCB_REG_40NM_SPACE_SIZE;
+ break;
+ default:
+ dev_err(priv->dev, "invalid phy version\n");
+ break;
+ };
+
+ return priv->phy_base + (port->portnum * size);
+}
+
+static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
+{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ u32 size = 0;
+
+ switch (priv->version) {
+ case BRCM_SATA_PHY_IPROC_NS2:
+ size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
+ break;
+ default:
+ dev_err(priv->dev, "invalid phy version\n");
+ break;
+ };
+
+ return priv->ctrl_base + (port->portnum * size);
+}
+
+static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
+ u32 ofs, u32 msk, u32 value)
+{
+ u32 tmp;
+
+ writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+ tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+ tmp = (tmp & msk) | value;
+ writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
+{
+ writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+ return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+/* These defaults were characterized by H/W group */
+#define STB_FMIN_VAL_DEFAULT 0x3df
+#define STB_FMAX_VAL_DEFAULT 0x3df
+#define STB_FMAX_VAL_SSC 0x83
+
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
+{
+ void __iomem *base = brcm_sata_pcb_base(port);
+ struct brcm_sata_phy *priv = port->phy_priv;
+ u32 tmp;
+
+ /* override the TX spread spectrum setting */
+ tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+
+ /* set fixed min freq */
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+ ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
+ STB_FMIN_VAL_DEFAULT);
+
+ /* set fixed max freq depending on SSC config */
+ if (port->ssc_en) {
+ dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
+ tmp = STB_FMAX_VAL_SSC;
+ } else {
+ tmp = STB_FMAX_VAL_DEFAULT;
+ }
+
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+ ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+
+ return 0;
+}
+
+/* NS2 SATA PLL1 defaults were characterized by H/W group */
+#define NS2_PLL1_ACTRL2_MAGIC 0x1df8
+#define NS2_PLL1_ACTRL3_MAGIC 0x2b00
+#define NS2_PLL1_ACTRL4_MAGIC 0x8824
+
+static int brcm_ns2_sata_init(struct brcm_sata_port *port)
+{
+ int try;
+ unsigned int val;
+ void __iomem *base = brcm_sata_pcb_base(port);
+ void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
+ struct device *dev = port->phy_priv->dev;
+
+ /* Configure OOB control */
+ val = 0x0;
+ val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
+ val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
+ val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
+ val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+ val = 0x0;
+ val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
+ val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
+ val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+ /* Configure PHY PLL register bank 1 */
+ val = NS2_PLL1_ACTRL2_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+ val = NS2_PLL1_ACTRL3_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+ val = NS2_PLL1_ACTRL4_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+ /* Configure PHY BLOCK0 register bank */
+ /* Set oob_clk_sel to refclk/2 */
+ brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
+ ~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
+ BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
+
+ /* Strobe PHY reset using PHY control register */
+ writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
+ mdelay(1);
+ writel(0x0, ctrl_base + PHY_CTRL_1);
+ mdelay(1);
+
+ /* Wait for PHY PLL lock by polling pll_lock bit */
+ try = 50;
+ while (try) {
+ val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ BLOCK0_XGXSSTATUS);
+ if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+ break;
+ msleep(20);
+ try--;
+ }
+ if (!try) {
+ /* PLL did not lock; give up */
+ dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+ return 0;
+}
+
+static int brcm_sata_phy_init(struct phy *phy)
+{
+ int rc;
+ struct brcm_sata_port *port = phy_get_drvdata(phy);
+
+ switch (port->phy_priv->version) {
+ case BRCM_SATA_PHY_STB_28NM:
+ case BRCM_SATA_PHY_STB_40NM:
+ rc = brcm_stb_sata_init(port);
+ break;
+ case BRCM_SATA_PHY_IPROC_NS2:
+ rc = brcm_ns2_sata_init(port);
+ break;
+ default:
+ rc = -ENODEV;
+ };
+
+ return 0;
+}
+
+static const struct phy_ops phy_ops = {
+ .init = brcm_sata_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id brcm_sata_phy_of_match[] = {
+ { .compatible = "brcm,bcm7445-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_STB_28NM },
+ { .compatible = "brcm,bcm7425-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_STB_40NM },
+ { .compatible = "brcm,iproc-ns2-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
+
+static int brcm_sata_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node, *child;
+ const struct of_device_id *of_id;
+ struct brcm_sata_phy *priv;
+ struct resource *res;
+ struct phy_provider *provider;
+ int ret, count = 0;
+
+ if (of_get_child_count(dn) == 0)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ dev_set_drvdata(dev, priv);
+ priv->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+ priv->phy_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->phy_base))
+ return PTR_ERR(priv->phy_base);
+
+ of_id = of_match_node(brcm_sata_phy_of_match, dn);
+ if (of_id)
+ priv->version = (enum brcm_sata_phy_version)of_id->data;
+ else
+ priv->version = BRCM_SATA_PHY_STB_28NM;
+
+ if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "phy-ctrl");
+ priv->ctrl_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->ctrl_base))
+ return PTR_ERR(priv->ctrl_base);
+ }
+
+ for_each_available_child_of_node(dn, child) {
+ unsigned int id;
+ struct brcm_sata_port *port;
+
+ if (of_property_read_u32(child, "reg", &id)) {
+ dev_err(dev, "missing reg property in node %s\n",
+ child->name);
+ ret = -EINVAL;
+ goto put_child;
+ }
+
+ if (id >= MAX_PORTS) {
+ dev_err(dev, "invalid reg: %u\n", id);
+ ret = -EINVAL;
+ goto put_child;
+ }
+ if (priv->phys[id].phy) {
+ dev_err(dev, "already registered port %u\n", id);
+ ret = -EINVAL;
+ goto put_child;
+ }
+
+ port = &priv->phys[id];
+ port->portnum = id;
+ port->phy_priv = priv;
+ port->phy = devm_phy_create(dev, child, &phy_ops);
+ port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
+ if (IS_ERR(port->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ ret = PTR_ERR(port->phy);
+ goto put_child;
+ }
+
+ phy_set_drvdata(port->phy, port);
+ count++;
+ }
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "could not register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ dev_info(dev, "registered %d port(s)\n", count);
+
+ return 0;
+put_child:
+ of_node_put(child);
+ return ret;
+}
+
+static struct platform_driver brcm_sata_phy_driver = {
+ .probe = brcm_sata_phy_probe,
+ .driver = {
+ .of_match_table = brcm_sata_phy_of_match,
+ .name = "brcm-sata-phy",
+ }
+};
+module_platform_driver(brcm_sata_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marc Carino");
+MODULE_AUTHOR("Brian Norris");
+MODULE_ALIAS("platform:phy-brcm-sata");
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
deleted file mode 100644
index a23172ff40e3..000000000000
--- a/drivers/phy/phy-brcmstb-sata.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Broadcom SATA3 AHCI Controller PHY Driver
- *
- * Copyright © 2009-2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-
-#define SATA_MDIO_BANK_OFFSET 0x23c
-#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
-
-#define MAX_PORTS 2
-
-/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
-
-/* The older SATA PHY registers duplicated per port registers within the map,
- * rather than having a separate map per port.
- */
-#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
-
-enum brcm_sata_phy_version {
- BRCM_SATA_PHY_28NM,
- BRCM_SATA_PHY_40NM,
-};
-
-struct brcm_sata_port {
- int portnum;
- struct phy *phy;
- struct brcm_sata_phy *phy_priv;
- bool ssc_en;
-};
-
-struct brcm_sata_phy {
- struct device *dev;
- void __iomem *phy_base;
- enum brcm_sata_phy_version version;
-
- struct brcm_sata_port phys[MAX_PORTS];
-};
-
-enum sata_mdio_phy_regs {
- PLL_REG_BANK_0 = 0x50,
- PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
-
- TXPMD_REG_BANK = 0x1a0,
- TXPMD_CONTROL1 = 0x81,
- TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
- TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1),
- TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82,
- TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83,
- TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
- TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
- TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
-};
-
-static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
-{
- struct brcm_sata_phy *priv = port->phy_priv;
- u32 offset = 0;
-
- if (priv->version == BRCM_SATA_PHY_28NM)
- offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
- else if (priv->version == BRCM_SATA_PHY_40NM)
- offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
- else
- dev_err(priv->dev, "invalid phy version\n");
-
- return priv->phy_base + (port->portnum * offset);
-}
-
-static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
- u32 msk, u32 value)
-{
- u32 tmp;
-
- writel(bank, addr + SATA_MDIO_BANK_OFFSET);
- tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
- tmp = (tmp & msk) | value;
- writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
-}
-
-/* These defaults were characterized by H/W group */
-#define FMIN_VAL_DEFAULT 0x3df
-#define FMAX_VAL_DEFAULT 0x3df
-#define FMAX_VAL_SSC 0x83
-
-static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
-{
- void __iomem *base = brcm_sata_phy_base(port);
- struct brcm_sata_phy *priv = port->phy_priv;
- u32 tmp;
-
- /* override the TX spread spectrum setting */
- tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
-
- /* set fixed min freq */
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
- ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
- FMIN_VAL_DEFAULT);
-
- /* set fixed max freq depending on SSC config */
- if (port->ssc_en) {
- dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
- tmp = FMAX_VAL_SSC;
- } else {
- tmp = FMAX_VAL_DEFAULT;
- }
-
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
- ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
-}
-
-static int brcm_sata_phy_init(struct phy *phy)
-{
- struct brcm_sata_port *port = phy_get_drvdata(phy);
-
- brcm_sata_cfg_ssc(port);
-
- return 0;
-}
-
-static const struct phy_ops phy_ops = {
- .init = brcm_sata_phy_init,
- .owner = THIS_MODULE,
-};
-
-static const struct of_device_id brcm_sata_phy_of_match[] = {
- { .compatible = "brcm,bcm7445-sata-phy",
- .data = (void *)BRCM_SATA_PHY_28NM },
- { .compatible = "brcm,bcm7425-sata-phy",
- .data = (void *)BRCM_SATA_PHY_40NM },
- {},
-};
-MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
-
-static int brcm_sata_phy_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *dn = dev->of_node, *child;
- const struct of_device_id *of_id;
- struct brcm_sata_phy *priv;
- struct resource *res;
- struct phy_provider *provider;
- int ret, count = 0;
-
- if (of_get_child_count(dn) == 0)
- return -ENODEV;
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- dev_set_drvdata(dev, priv);
- priv->dev = dev;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
- priv->phy_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(priv->phy_base))
- return PTR_ERR(priv->phy_base);
-
- of_id = of_match_node(brcm_sata_phy_of_match, dn);
- if (of_id)
- priv->version = (enum brcm_sata_phy_version)of_id->data;
- else
- priv->version = BRCM_SATA_PHY_28NM;
-
- for_each_available_child_of_node(dn, child) {
- unsigned int id;
- struct brcm_sata_port *port;
-
- if (of_property_read_u32(child, "reg", &id)) {
- dev_err(dev, "missing reg property in node %s\n",
- child->name);
- ret = -EINVAL;
- goto put_child;
- }
-
- if (id >= MAX_PORTS) {
- dev_err(dev, "invalid reg: %u\n", id);
- ret = -EINVAL;
- goto put_child;
- }
- if (priv->phys[id].phy) {
- dev_err(dev, "already registered port %u\n", id);
- ret = -EINVAL;
- goto put_child;
- }
-
- port = &priv->phys[id];
- port->portnum = id;
- port->phy_priv = priv;
- port->phy = devm_phy_create(dev, child, &phy_ops);
- port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
- if (IS_ERR(port->phy)) {
- dev_err(dev, "failed to create PHY\n");
- ret = PTR_ERR(port->phy);
- goto put_child;
- }
-
- phy_set_drvdata(port->phy, port);
- count++;
- }
-
- provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(provider)) {
- dev_err(dev, "could not register PHY provider\n");
- return PTR_ERR(provider);
- }
-
- dev_info(dev, "registered %d port(s)\n", count);
-
- return 0;
-put_child:
- of_node_put(child);
- return ret;
-}
-
-static struct platform_driver brcm_sata_phy_driver = {
- .probe = brcm_sata_phy_probe,
- .driver = {
- .of_match_table = brcm_sata_phy_of_match,
- .name = "brcmstb-sata-phy",
- }
-};
-module_platform_driver(brcm_sata_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marc Carino");
-MODULE_AUTHOR("Brian Norris");
-MODULE_ALIAS("platform:phy-brcmstb-sata");
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 2a54caba93b4..cc093ebfda94 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -1,7 +1,7 @@
/*
* Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd.
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -13,96 +13,276 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon/exynos4-pmu.h>
+#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/mfd/syscon.h>
-/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */
-#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4)
-
enum exynos_mipi_phy_id {
+ EXYNOS_MIPI_PHY_ID_NONE = -1,
EXYNOS_MIPI_PHY_ID_CSIS0,
EXYNOS_MIPI_PHY_ID_DSIM0,
EXYNOS_MIPI_PHY_ID_CSIS1,
EXYNOS_MIPI_PHY_ID_DSIM1,
+ EXYNOS_MIPI_PHY_ID_CSIS2,
EXYNOS_MIPI_PHYS_NUM
};
-#define is_mipi_dsim_phy_id(id) \
- ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
+enum exynos_mipi_phy_regmap_id {
+ EXYNOS_MIPI_REGMAP_PMU,
+ EXYNOS_MIPI_REGMAP_DISP,
+ EXYNOS_MIPI_REGMAP_CAM0,
+ EXYNOS_MIPI_REGMAP_CAM1,
+ EXYNOS_MIPI_REGMAPS_NUM
+};
+
+struct mipi_phy_device_desc {
+ int num_phys;
+ int num_regmaps;
+ const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM];
+ struct exynos_mipi_phy_desc {
+ enum exynos_mipi_phy_id coupled_phy_id;
+ u32 enable_val;
+ unsigned int enable_reg;
+ enum exynos_mipi_phy_regmap_id enable_map;
+ u32 resetn_val;
+ unsigned int resetn_reg;
+ enum exynos_mipi_phy_regmap_id resetn_map;
+ } phys[EXYNOS_MIPI_PHYS_NUM];
+};
+
+static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 4,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
+static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
+#define EXYNOS5433_SYSREG_DISP_MIPI_PHY 0x100C
+#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON 0x1014
+#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON 0x1020
+
+static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
+ .num_regmaps = 4,
+ .regmap_names = {
+ "samsung,pmu-syscon",
+ "samsung,disp-sysreg",
+ "samsung,cam0-sysreg",
+ "samsung,cam1-sysreg"
+ },
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM1,
+ },
+ },
+};
struct exynos_mipi_video_phy {
+ struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM];
+ int num_phys;
struct video_phy_desc {
struct phy *phy;
unsigned int index;
+ const struct exynos_mipi_phy_desc *data;
} phys[EXYNOS_MIPI_PHYS_NUM];
spinlock_t slock;
- void __iomem *regs;
- struct regmap *regmap;
};
-static int __set_phy_state(struct exynos_mipi_video_phy *state,
- enum exynos_mipi_phy_id id, unsigned int on)
+static inline int __is_running(const struct exynos_mipi_phy_desc *data,
+ struct exynos_mipi_video_phy *state)
{
- const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
- void __iomem *addr;
- u32 val, reset;
+ u32 val;
- if (is_mipi_dsim_phy_id(id))
- reset = EXYNOS4_MIPI_PHY_MRESETN;
- else
- reset = EXYNOS4_MIPI_PHY_SRESETN;
+ regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+ return val & data->resetn_val;
+}
+
+static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
+ struct exynos_mipi_video_phy *state, unsigned int on)
+{
+ u32 val;
spin_lock(&state->slock);
- if (!IS_ERR(state->regmap)) {
- regmap_read(state->regmap, offset, &val);
- if (on)
- val |= reset;
- else
- val &= ~reset;
- regmap_write(state->regmap, offset, val);
- if (on)
- val |= EXYNOS4_MIPI_PHY_ENABLE;
- else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
- val &= ~EXYNOS4_MIPI_PHY_ENABLE;
- regmap_write(state->regmap, offset, val);
- } else {
- addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
-
- val = readl(addr);
- if (on)
- val |= reset;
- else
- val &= ~reset;
- writel(val, addr);
- /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */
- if (on)
- val |= EXYNOS4_MIPI_PHY_ENABLE;
- else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
- val &= ~EXYNOS4_MIPI_PHY_ENABLE;
-
- writel(val, addr);
+ /* disable in PMU sysreg */
+ if (!on && data->coupled_phy_id >= 0 &&
+ !__is_running(state->phys[data->coupled_phy_id].data, state)) {
+ regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+ &val);
+ val &= ~data->enable_val;
+ regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+ val);
+ }
+
+ /* PHY reset */
+ regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+ val = on ? (val | data->resetn_val) : (val & ~data->resetn_val);
+ regmap_write(state->regmaps[data->resetn_map], data->resetn_reg, val);
+
+ /* enable in PMU sysreg */
+ if (on) {
+ regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+ &val);
+ val |= data->enable_val;
+ regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+ val);
}
spin_unlock(&state->slock);
+
return 0;
}
#define to_mipi_video_phy(desc) \
- container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]);
+ container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index])
static int exynos_mipi_video_phy_power_on(struct phy *phy)
{
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
- return __set_phy_state(state, phy_desc->index, 1);
+ return __set_phy_state(phy_desc->data, state, 1);
}
static int exynos_mipi_video_phy_power_off(struct phy *phy)
@@ -110,7 +290,7 @@ static int exynos_mipi_video_phy_power_off(struct phy *phy)
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
- return __set_phy_state(state, phy_desc->index, 0);
+ return __set_phy_state(phy_desc->data, state, 0);
}
static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
@@ -118,7 +298,7 @@ static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
{
struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
- if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM))
+ if (WARN_ON(args->args[0] >= state->num_phys))
return ERR_PTR(-ENODEV);
return state->phys[args->args[0]].phy;
@@ -132,32 +312,33 @@ static const struct phy_ops exynos_mipi_video_phy_ops = {
static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
{
+ const struct mipi_phy_device_desc *phy_dev;
struct exynos_mipi_video_phy *state;
struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
unsigned int i;
+ phy_dev = of_device_get_match_data(dev);
+ if (!phy_dev)
+ return -ENODEV;
+
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
- state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
- if (IS_ERR(state->regmap)) {
- struct resource *res;
-
- dev_info(dev, "regmap lookup failed: %ld\n",
- PTR_ERR(state->regmap));
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- state->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(state->regs))
- return PTR_ERR(state->regs);
+ for (i = 0; i < phy_dev->num_regmaps; i++) {
+ state->regmaps[i] = syscon_regmap_lookup_by_phandle(np,
+ phy_dev->regmap_names[i]);
+ if (IS_ERR(state->regmaps[i]))
+ return PTR_ERR(state->regmaps[i]);
}
+ state->num_phys = phy_dev->num_phys;
+ spin_lock_init(&state->slock);
dev_set_drvdata(dev, state);
- spin_lock_init(&state->slock);
- for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+ for (i = 0; i < state->num_phys; i++) {
struct phy *phy = devm_phy_create(dev, NULL,
&exynos_mipi_video_phy_ops);
if (IS_ERR(phy)) {
@@ -167,6 +348,7 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
state->phys[i].phy = phy;
state->phys[i].index = i;
+ state->phys[i].data = &phy_dev->phys[i];
phy_set_drvdata(phy, &state->phys[i]);
}
@@ -177,8 +359,17 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
}
static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
- { .compatible = "samsung,s5pv210-mipi-video-phy" },
- { },
+ {
+ .compatible = "samsung,s5pv210-mipi-video-phy",
+ .data = &s5pv210_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5420-mipi-video-phy",
+ .data = &exynos5420_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5433-mipi-video-phy",
+ .data = &exynos5433_mipi_phy,
+ },
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index c0e7b4b0cf5c..4d85e730ccab 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -134,6 +134,11 @@
#define U3P_SR_COEF_DIVISOR 1000
#define U3P_FM_DET_CYCLE_CNT 1024
+struct mt65xx_phy_pdata {
+ /* avoid RX sensitivity level degradation only for mt8173 */
+ bool avoid_rx_sen_degradation;
+};
+
struct mt65xx_phy_instance {
struct phy *phy;
void __iomem *port_base;
@@ -145,6 +150,7 @@ struct mt65xx_u3phy {
struct device *dev;
void __iomem *sif_base; /* include sif2, but exclude port's */
struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
+ const struct mt65xx_phy_pdata *pdata;
struct mt65xx_phy_instance **phys;
int nphys;
};
@@ -241,22 +247,26 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
tmp = readl(port_base + U3P_U2PHYACR4);
tmp &= ~P2C_U2_GPIO_CTR_MSK;
writel(tmp, port_base + U3P_U2PHYACR4);
+ }
- tmp = readl(port_base + U3P_USBPHYACR2);
- tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
- writel(tmp, port_base + U3P_USBPHYACR2);
-
- tmp = readl(port_base + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, port_base + U3D_U2PHYDCR0);
- } else {
- tmp = readl(port_base + U3D_U2PHYDCR0);
- tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, port_base + U3D_U2PHYDCR0);
-
- tmp = readl(port_base + U3P_U2PHYDTM0);
- tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
- writel(tmp, port_base + U3P_U2PHYDTM0);
+ if (u3phy->pdata->avoid_rx_sen_degradation) {
+ if (!index) {
+ tmp = readl(port_base + U3P_USBPHYACR2);
+ tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
+ writel(tmp, port_base + U3P_USBPHYACR2);
+
+ tmp = readl(port_base + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, port_base + U3D_U2PHYDCR0);
+ } else {
+ tmp = readl(port_base + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, port_base + U3D_U2PHYDCR0);
+
+ tmp = readl(port_base + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, port_base + U3P_U2PHYDTM0);
+ }
}
tmp = readl(port_base + U3P_USBPHYACR6);
@@ -318,7 +328,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
- /* [mt8173]switch 100uA current to SSUSB */
+ /* switch 100uA current to SSUSB */
tmp = readl(port_base + U3P_USBPHYACR5);
tmp |= PA5_RG_U2_HS_100U_U3_EN;
writel(tmp, port_base + U3P_USBPHYACR5);
@@ -335,7 +345,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
writel(tmp, port_base + U3P_USBPHYACR5);
- if (index) {
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -386,7 +396,9 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
tmp = readl(port_base + U3P_U3_PHYA_REG0);
tmp &= ~P3A_RG_U3_VUSB10_ON;
writel(tmp, port_base + U3P_U3_PHYA_REG0);
- } else {
+ }
+
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -402,7 +414,7 @@ static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
u32 index = instance->index;
u32 tmp;
- if (index) {
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -502,8 +514,24 @@ static struct phy_ops mt65xx_u3phy_ops = {
.owner = THIS_MODULE,
};
+static const struct mt65xx_phy_pdata mt2701_pdata = {
+ .avoid_rx_sen_degradation = false,
+};
+
+static const struct mt65xx_phy_pdata mt8173_pdata = {
+ .avoid_rx_sen_degradation = true,
+};
+
+static const struct of_device_id mt65xx_u3phy_id_table[] = {
+ { .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
+ { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+
static int mt65xx_u3phy_probe(struct platform_device *pdev)
{
+ const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device_node *child_np;
@@ -513,10 +541,15 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
struct resource res;
int port, retval;
+ match = of_match_node(mt65xx_u3phy_id_table, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
if (!u3phy)
return -ENOMEM;
+ u3phy->pdata = match->data;
u3phy->nphys = of_get_child_count(np);
u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
sizeof(*u3phy->phys), GFP_KERNEL);
@@ -587,12 +620,6 @@ put_child:
return retval;
}
-static const struct of_device_id mt65xx_u3phy_id_table[] = {
- { .compatible = "mediatek,mt8173-u3phy", },
- { },
-};
-MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
-
static struct platform_driver mt65xx_u3phy_driver = {
.probe = mt65xx_u3phy_probe,
.driver = {
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index c7a05996d5c1..97d4dd6ea924 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -195,6 +195,7 @@ static const struct of_device_id rcar_gen2_phy_match_table[] = {
{ .compatible = "renesas,usb-phy-r8a7790" },
{ .compatible = "renesas,usb-phy-r8a7791" },
{ .compatible = "renesas,usb-phy-r8a7794" },
+ { .compatible = "renesas,rcar-gen2-usb-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index bc4f7dd821aa..76bb88f0700a 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/extcon.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -19,6 +20,7 @@
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
/******* USB2.0 Host registers (original offset is +0x200) *******/
#define USB2_INT_ENABLE 0x000
@@ -74,20 +76,17 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
-struct rcar_gen3_data {
- void __iomem *base;
- struct clk *clk;
-};
-
struct rcar_gen3_chan {
- struct rcar_gen3_data usb2;
+ void __iomem *base;
+ struct extcon_dev *extcon;
struct phy *phy;
+ struct regulator *vbus;
bool has_otg;
};
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_COMMCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
@@ -100,7 +99,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_LINECTRL1);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
@@ -114,7 +113,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_ADPCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
@@ -130,6 +129,9 @@ static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
rcar_gen3_set_linectrl(ch, 1, 1);
rcar_gen3_set_host_mode(ch, 1);
rcar_gen3_enable_vbus_ctrl(ch, 1);
+
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
}
static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
@@ -137,17 +139,20 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
rcar_gen3_set_linectrl(ch, 0, 1);
rcar_gen3_set_host_mode(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
}
static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
{
- return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
+ return !!(readl(ch->base + USB2_ADPCTRL) &
USB2_ADPCTRL_OTGSESSVLD);
}
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
- return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+ return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
@@ -166,7 +171,7 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val;
val = readl(usb2_base + USB2_VBCTRL);
@@ -187,7 +192,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *usb2_base = channel->base;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
@@ -205,7 +210,7 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- writel(0, channel->usb2.base + USB2_INT_ENABLE);
+ writel(0, channel->base + USB2_INT_ENABLE);
return 0;
}
@@ -213,8 +218,15 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *usb2_base = channel->base;
u32 val;
+ int ret;
+
+ if (channel->vbus) {
+ ret = regulator_enable(channel->vbus);
+ if (ret)
+ return ret;
+ }
val = readl(usb2_base + USB2_USBCTR);
val |= USB2_USBCTR_PLL_RST;
@@ -225,17 +237,29 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
return 0;
}
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ int ret = 0;
+
+ if (channel->vbus)
+ ret = regulator_disable(channel->vbus);
+
+ return ret;
+}
+
static struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
+ .power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
{
struct rcar_gen3_chan *ch = _ch;
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
@@ -251,10 +275,17 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
+ { .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
+static const unsigned int rcar_gen3_phy_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -273,18 +304,30 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- channel->usb2.base = devm_ioremap_resource(dev, res);
- if (IS_ERR(channel->usb2.base))
- return PTR_ERR(channel->usb2.base);
+ channel->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(channel->base))
+ return PTR_ERR(channel->base);
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
if (irq >= 0) {
+ int ret;
+
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(dev), channel);
if (irq < 0)
dev_err(dev, "No irq handler (%d)\n", irq);
channel->has_otg = true;
+ channel->extcon = devm_extcon_dev_allocate(dev,
+ rcar_gen3_phy_cable);
+ if (IS_ERR(channel->extcon))
+ return PTR_ERR(channel->extcon);
+
+ ret = devm_extcon_dev_register(dev, channel->extcon);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register extcon\n");
+ return ret;
+ }
}
/* devm_phy_create() will call pm_runtime_enable(dev); */
@@ -294,6 +337,13 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
return PTR_ERR(channel->phy);
}
+ channel->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (IS_ERR(channel->vbus)) {
+ if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
+ return PTR_ERR(channel->vbus);
+ channel->vbus = NULL;
+ }
+
phy_set_drvdata(channel->phy, channel);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index f62d899063a3..d60b149cff0f 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -216,7 +216,7 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
init.parent_names = &clk_name;
init.num_parents = 1;
} else {
- init.flags = CLK_IS_ROOT;
+ init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 03:30:30 +0000