diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/phy-brcm-sata.c | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c index 6c4c5cb791ca..18d662610075 100644 --- a/drivers/phy/phy-brcm-sata.c +++ b/drivers/phy/phy-brcm-sata.c @@ -45,6 +45,7 @@ enum brcm_sata_phy_version { BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, + BRCM_SATA_PHY_IPROC_NSP, }; struct brcm_sata_port { @@ -73,6 +74,13 @@ enum sata_phy_regs { PLL_REG_BANK_0 = 0x050, PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + PLLCONTROL_0_FREQ_DET_RESTART = BIT(13), + PLLCONTROL_0_FREQ_MONITOR = BIT(12), + PLLCONTROL_0_SEQ_START = BIT(15), + PLL_CAP_CONTROL = 0x85, + PLL_ACTRL2 = 0x8b, + PLL_ACTRL2_SELDIV_MASK = 0x1f, + PLL_ACTRL2_SELDIV_SHIFT = 9, PLL1_REG_BANK = 0x060, PLL1_ACTRL2 = 0x82, @@ -80,6 +88,7 @@ enum sata_phy_regs { PLL1_ACTRL4 = 0x84, OOB_REG_BANK = 0x150, + OOB1_REG_BANK = 0x160, OOB_CTRL1 = 0x80, OOB_CTRL1_BURST_MAX_MASK = 0xf, OOB_CTRL1_BURST_MAX_SHIFT = 12, @@ -271,6 +280,73 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port) return 0; } +static int brcm_nsp_sata_init(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + struct device *dev = port->phy_priv->dev; + void __iomem *base = priv->phy_base; + unsigned int oob_bank; + unsigned int val, try; + + /* Configure OOB control */ + if (port->portnum == 0) + oob_bank = OOB_REG_BANK; + else if (port->portnum == 1) + oob_bank = OOB1_REG_BANK; + else + return -EINVAL; + + val = 0x0; + val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val); + + val = 0x0; + val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val); + + + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2, + ~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT), + 0x0c << PLL_ACTRL2_SELDIV_SHIFT); + + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL, + 0xff0, 0x4f0); + + val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR; + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + val = PLLCONTROL_0_SEQ_START; + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, 0); + mdelay(10); + brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + + /* Wait for pll_seq_done bit */ + try = 50; + while (try--) { + val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + static int brcm_sata_phy_init(struct phy *phy) { int rc; @@ -284,6 +360,9 @@ static int brcm_sata_phy_init(struct phy *phy) case BRCM_SATA_PHY_IPROC_NS2: rc = brcm_ns2_sata_init(port); break; + case BRCM_SATA_PHY_IPROC_NSP: + rc = brcm_nsp_sata_init(port); + break; default: rc = -ENODEV; }; @@ -303,6 +382,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = { .data = (void *)BRCM_SATA_PHY_STB_40NM }, { .compatible = "brcm,iproc-ns2-sata-phy", .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, + { .compatible = "brcm,iproc-nsp-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NSP }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); |