summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/Kconfig12
-rw-r--r--drivers/pinctrl/core.c35
-rw-r--r--drivers/pinctrl/pinconf-generic.c1
-rw-r--r--drivers/pinctrl/pinctrl-at91.c2
-rw-r--r--drivers/pinctrl/pinctrl-bcm2835.c2
-rw-r--r--drivers/pinctrl/pinctrl-coh901.c55
-rw-r--r--drivers/pinctrl/pinctrl-falcon.c2
-rw-r--r--drivers/pinctrl/pinctrl-imx.c4
-rw-r--r--drivers/pinctrl/pinctrl-lantiq.c23
-rw-r--r--drivers/pinctrl/pinctrl-mxs.c2
-rw-r--r--drivers/pinctrl/pinctrl-nomadik-db8500.c125
-rw-r--r--drivers/pinctrl/pinctrl-nomadik-db8540.c16
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.c152
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.h2
-rw-r--r--drivers/pinctrl/pinctrl-pxa3xx.c12
-rw-r--r--drivers/pinctrl/pinctrl-pxa3xx.h2
-rw-r--r--drivers/pinctrl/pinctrl-single.c88
-rw-r--r--drivers/pinctrl/pinctrl-tegra.c24
-rw-r--r--drivers/pinctrl/pinctrl-u300.c55
-rw-r--r--drivers/pinctrl/pinctrl-xway.c2
-rw-r--r--drivers/pinctrl/pinmux.c28
-rw-r--r--drivers/pinctrl/spear/pinctrl-plgpio.c20
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear.c50
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear.h14
-rw-r--r--drivers/pinctrl/spear/pinctrl-spear1340.c27
25 files changed, 529 insertions, 226 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 6d5a50bcabe6..0074873561de 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -100,17 +100,15 @@ config PINCTRL_MMP2
config PINCTRL_MXS
bool
+ select PINMUX
+ select PINCONF
config PINCTRL_IMX23
bool
- select PINMUX
- select PINCONF
select PINCTRL_MXS
config PINCTRL_IMX28
bool
- select PINMUX
- select PINCONF
select PINCTRL_MXS
config PINCTRL_NOMADIK
@@ -158,17 +156,15 @@ config PINCTRL_SIRF
config PINCTRL_TEGRA
bool
+ select PINMUX
+ select PINCONF
config PINCTRL_TEGRA20
bool
- select PINMUX
- select PINCONF
select PINCTRL_TEGRA
config PINCTRL_TEGRA30
bool
- select PINMUX
- select PINCONF
select PINCTRL_TEGRA
config PINCTRL_U300
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 71db586b2afd..5cdee8669ea3 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -345,18 +345,47 @@ void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
}
EXPORT_SYMBOL_GPL(pinctrl_add_gpio_ranges);
-struct pinctrl_dev *find_pinctrl_and_add_gpio_range(const char *devname,
+struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
struct pinctrl_gpio_range *range)
{
struct pinctrl_dev *pctldev = get_pinctrl_dev_from_devname(devname);
+ /*
+ * If we can't find this device, let's assume that is because
+ * it has not probed yet, so the driver trying to register this
+ * range need to defer probing.
+ */
if (!pctldev)
- return NULL;
+ return ERR_PTR(-EPROBE_DEFER);
pinctrl_add_gpio_range(pctldev, range);
return pctldev;
}
-EXPORT_SYMBOL_GPL(find_pinctrl_and_add_gpio_range);
+EXPORT_SYMBOL_GPL(pinctrl_find_and_add_gpio_range);
+
+/**
+ * pinctrl_find_gpio_range_from_pin() - locate the GPIO range for a pin
+ * @pctldev: the pin controller device to look in
+ * @pin: a controller-local number to find the range for
+ */
+struct pinctrl_gpio_range *
+pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
+ unsigned int pin)
+{
+ struct pinctrl_gpio_range *range = NULL;
+
+ /* Loop over the ranges */
+ list_for_each_entry(range, &pctldev->gpio_ranges, node) {
+ /* Check if we're in the valid range */
+ if (pin >= range->pin_base &&
+ pin < range->pin_base + range->npins) {
+ return range;
+ }
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pinctrl_find_gpio_range_from_pin);
/**
* pinctrl_remove_gpio_range() - remove a range of GPIOs fro a pin controller
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 33fbaeaa65dd..833a36458157 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -41,6 +41,7 @@ struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
+ PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_DISABLE, "input schmitt disabled", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 0d7e6c3c33a7..c5e757157183 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -776,7 +776,7 @@ static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
{
}
-struct pinconf_ops at91_pinconf_ops = {
+static struct pinconf_ops at91_pinconf_ops = {
.pin_config_get = at91_pinconf_get,
.pin_config_set = at91_pinconf_set,
.pin_config_dbg_show = at91_pinconf_dbg_show,
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index 7e9be18ec2d2..9a963edd66d1 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -916,7 +916,7 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
return 0;
}
-struct pinconf_ops bcm2835_pinconf_ops = {
+static struct pinconf_ops bcm2835_pinconf_ops = {
.pin_config_get = bcm2835_pinconf_get,
.pin_config_set = bcm2835_pinconf_set,
};
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index 5c7daf9169e8..fbb37154471c 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -658,6 +658,36 @@ static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
}
}
+/*
+ * Here we map a GPIO in the local gpio_chip pin space to a pin in
+ * the local pinctrl pin space. The pin controller used is
+ * pinctrl-u300.
+ */
+struct coh901_pinpair {
+ unsigned int offset;
+ unsigned int pin_base;
+};
+
+#define COH901_PINRANGE(a, b) { .offset = a, .pin_base = b }
+
+static struct coh901_pinpair coh901_pintable[] = {
+ COH901_PINRANGE(10, 426),
+ COH901_PINRANGE(11, 180),
+ COH901_PINRANGE(12, 165), /* MS/MMC card insertion */
+ COH901_PINRANGE(13, 179),
+ COH901_PINRANGE(14, 178),
+ COH901_PINRANGE(16, 194),
+ COH901_PINRANGE(17, 193),
+ COH901_PINRANGE(18, 192),
+ COH901_PINRANGE(19, 191),
+ COH901_PINRANGE(20, 186),
+ COH901_PINRANGE(21, 185),
+ COH901_PINRANGE(22, 184),
+ COH901_PINRANGE(23, 183),
+ COH901_PINRANGE(24, 182),
+ COH901_PINRANGE(25, 181),
+};
+
static int __init u300_gpio_probe(struct platform_device *pdev)
{
struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
@@ -752,8 +782,10 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
U300_GPIO_PINS_PER_PORT,
&irq_domain_simple_ops,
port);
- if (!port->domain)
+ if (!port->domain) {
+ err = -ENOMEM;
goto err_no_domain;
+ }
irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
irq_set_handler_data(port->irq, port);
@@ -784,24 +816,31 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
goto err_no_chip;
}
- /* Spawn pin controller device as child of the GPIO, pass gpio chip */
- plat->pinctrl_device->dev.platform_data = &gpio->chip;
- err = platform_device_register(plat->pinctrl_device);
- if (err)
- goto err_no_pinctrl;
+ /*
+ * Add pinctrl pin ranges, the pin controller must be registered
+ * at this point
+ */
+ for (i = 0; i < ARRAY_SIZE(coh901_pintable); i++) {
+ struct coh901_pinpair *p = &coh901_pintable[i];
+
+ err = gpiochip_add_pin_range(&gpio->chip, "pinctrl-u300",
+ p->offset, p->pin_base, 1);
+ if (err)
+ goto err_no_range;
+ }
platform_set_drvdata(pdev, gpio);
return 0;
-err_no_pinctrl:
+err_no_range:
err = gpiochip_remove(&gpio->chip);
err_no_chip:
err_no_domain:
err_no_port:
u300_gpio_free_ports(gpio);
clk_disable_unprepare(gpio->clk);
- dev_info(&pdev->dev, "module ERROR:%d\n", err);
+ dev_err(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
index ee7305903470..8ed20e84cb02 100644
--- a/drivers/pinctrl/pinctrl-falcon.c
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -322,7 +322,7 @@ static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
{
}
-struct pinconf_ops falcon_pinconf_ops = {
+static struct pinconf_ops falcon_pinconf_ops = {
.pin_config_get = falcon_pinconf_get,
.pin_config_set = falcon_pinconf_set,
.pin_config_group_get = falcon_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index 63866d95357d..525a2c8644f6 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -71,7 +71,7 @@ static const struct imx_pin_reg *imx_find_pin_reg(
break;
}
- if (!pin_reg) {
+ if (i == info->npin_regs) {
dev_err(info->dev, "Pin(%s): unable to find pin reg map\n",
info->pins[pin].name);
return NULL;
@@ -397,7 +397,7 @@ static void imx_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
}
}
-struct pinconf_ops imx_pinconf_ops = {
+static struct pinconf_ops imx_pinconf_ops = {
.pin_config_get = imx_pinconf_get,
.pin_config_set = imx_pinconf_set,
.pin_config_dbg_show = imx_pinconf_dbg_show,
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
index 07ba7682cf22..15f501d89026 100644
--- a/drivers/pinctrl/pinctrl-lantiq.c
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -46,8 +46,8 @@ static int ltq_get_group_pins(struct pinctrl_dev *pctrldev,
return 0;
}
-void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *map, unsigned num_maps)
+static void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
{
int i;
@@ -128,10 +128,10 @@ static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
return ret;
}
-int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config,
- struct pinctrl_map **map,
- unsigned *num_maps)
+static int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
{
struct pinctrl_map *tmp;
struct device_node *np;
@@ -275,16 +275,6 @@ static int ltq_pmx_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static void ltq_pmx_disable(struct pinctrl_dev *pctrldev,
- unsigned func,
- unsigned group)
-{
- /*
- * Nothing to do here. However, pinconf_check_ops() requires this
- * callback to be defined.
- */
-}
-
static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
struct pinctrl_gpio_range *range,
unsigned pin)
@@ -312,7 +302,6 @@ static struct pinmux_ops ltq_pmx_ops = {
.get_function_name = ltq_pmx_func_name,
.get_function_groups = ltq_pmx_get_groups,
.enable = ltq_pmx_enable,
- .disable = ltq_pmx_disable,
.gpio_request_enable = ltq_pmx_gpio_request_enable,
};
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index 4ba4636b6a4a..3e7d4d63f8bf 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -319,7 +319,7 @@ static void mxs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
seq_printf(s, "0x%lx", config);
}
-struct pinconf_ops mxs_pinconf_ops = {
+static struct pinconf_ops mxs_pinconf_ops = {
.pin_config_get = mxs_pinconf_get,
.pin_config_set = mxs_pinconf_set,
.pin_config_group_get = mxs_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c
index debaa75b0552..7d88ae352119 100644
--- a/drivers/pinctrl/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c
@@ -475,8 +475,10 @@ static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ9, DB8500_PIN_AH9,
DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
static const unsigned hsit_a_2_pins[] = { DB8500_PIN_AJ9, DB8500_PIN_AH9,
DB8500_PIN_AG9, DB8500_PIN_AG8 };
-static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 };
-static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
+static const unsigned clkout1_a_1_pins[] = { DB8500_PIN_AH7 };
+static const unsigned clkout1_a_2_pins[] = { DB8500_PIN_AG7 };
+static const unsigned clkout2_a_1_pins[] = { DB8500_PIN_AJ6 };
+static const unsigned clkout2_a_2_pins[] = { DB8500_PIN_AF7 };
static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29,
DB8500_PIN_AD29, DB8500_PIN_AC29, DB8500_PIN_AD28, DB8500_PIN_AD26,
DB8500_PIN_AE26, DB8500_PIN_AG29, DB8500_PIN_AE27, DB8500_PIN_AD27,
@@ -592,7 +594,8 @@ static const unsigned stmmod_c_1_pins[] = { DB8500_PIN_C20, DB8500_PIN_B21,
DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24 };
static const unsigned usbsim_c_1_pins[] = { DB8500_PIN_D22 };
static const unsigned mc4rstn_c_1_pins[] = { DB8500_PIN_AF25 };
-static const unsigned clkout_c_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12 };
+static const unsigned clkout1_c_1_pins[] = { DB8500_PIN_AH13 };
+static const unsigned clkout2_c_1_pins[] = { DB8500_PIN_AH12 };
static const unsigned i2c3_c_1_pins[] = { DB8500_PIN_AG12, DB8500_PIN_AH11 };
static const unsigned spi0_c_1_pins[] = { DB8500_PIN_AH10, DB8500_PIN_AH9,
DB8500_PIN_AG9, DB8500_PIN_AG8 };
@@ -600,14 +603,66 @@ static const unsigned usbsim_c_2_pins[] = { DB8500_PIN_AF8 };
static const unsigned i2c3_c_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
/* Other C1 column */
+static const unsigned u2rx_oc1_1_pins[] = { DB8500_PIN_AB2 };
+static const unsigned stmape_oc1_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_Y4,
+ DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned remap0_oc1_1_pins[] = { DB8500_PIN_E1 };
+static const unsigned remap1_oc1_1_pins[] = { DB8500_PIN_E2 };
+static const unsigned ptma9_oc1_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+ DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H2,
+ DB8500_PIN_J2, DB8500_PIN_H1 };
static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
DB8500_PIN_D6, DB8500_PIN_B7 };
+static const unsigned rf_oc1_1_pins[] = { DB8500_PIN_D8, DB8500_PIN_D9 };
+static const unsigned hxclk_oc1_1_pins[] = { DB8500_PIN_D16 };
+static const unsigned uartmodrx_oc1_1_pins[] = { DB8500_PIN_B17 };
+static const unsigned uartmodtx_oc1_1_pins[] = { DB8500_PIN_C16 };
+static const unsigned stmmod_oc1_1_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17,
+ DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19 };
+static const unsigned hxgpio_oc1_1_pins[] = { DB8500_PIN_D21, DB8500_PIN_D20,
+ DB8500_PIN_C20, DB8500_PIN_B21, DB8500_PIN_C21, DB8500_PIN_A22,
+ DB8500_PIN_B24, DB8500_PIN_C22 };
+static const unsigned rf_oc1_2_pins[] = { DB8500_PIN_C23, DB8500_PIN_D23 };
static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
DB8500_PIN_AH12, DB8500_PIN_AH11 };
static const unsigned spi2_oc1_2_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12,
DB8500_PIN_AH11 };
+/* Other C2 column */
+static const unsigned sbag_oc2_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_AB2,
+ DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned etmr4_oc2_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+ DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H2,
+ DB8500_PIN_J2, DB8500_PIN_H1 };
+static const unsigned ptma9_oc2_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+ DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+ DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+ DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
+ DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
+/* Other C3 column */
+static const unsigned stmmod_oc3_1_pins[] = { DB8500_PIN_AB2, DB8500_PIN_W2,
+ DB8500_PIN_W3, DB8500_PIN_V3, DB8500_PIN_V2 };
+static const unsigned stmmod_oc3_2_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+ DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3 };
+static const unsigned uartmodrx_oc3_1_pins[] = { DB8500_PIN_H2 };
+static const unsigned uartmodtx_oc3_1_pins[] = { DB8500_PIN_J2 };
+static const unsigned etmr4_oc3_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+ DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+ DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+ DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
+ DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
+/* Other C4 column */
+static const unsigned sbag_oc4_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+ DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3, DB8500_PIN_H1 };
+static const unsigned hwobs_oc4_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+ DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+ DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+ DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
+ DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+
#define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins, \
.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
@@ -639,6 +694,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A),
+ DB8500_PIN_GROUP(kp_a_2, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A),
@@ -647,8 +703,10 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
- DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
- DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
+ DB8500_PIN_GROUP(clkout1_a_1, NMK_GPIO_ALT_A),
+ DB8500_PIN_GROUP(clkout1_a_2, NMK_GPIO_ALT_A),
+ DB8500_PIN_GROUP(clkout2_a_1, NMK_GPIO_ALT_A),
+ DB8500_PIN_GROUP(clkout2_a_2, NMK_GPIO_ALT_A),
DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
/* Altfunction B column */
DB8500_PIN_GROUP(trig_b_1, NMK_GPIO_ALT_B),
@@ -720,15 +778,41 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
DB8500_PIN_GROUP(stmmod_c_1, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(usbsim_c_1, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(mc4rstn_c_1, NMK_GPIO_ALT_C),
- DB8500_PIN_GROUP(clkout_c_1, NMK_GPIO_ALT_C),
+ DB8500_PIN_GROUP(clkout1_c_1, NMK_GPIO_ALT_C),
+ DB8500_PIN_GROUP(clkout2_c_1, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(i2c3_c_1, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(spi0_c_1, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(usbsim_c_2, NMK_GPIO_ALT_C),
DB8500_PIN_GROUP(i2c3_c_2, NMK_GPIO_ALT_C),
/* Other alt C1 column */
+ DB8500_PIN_GROUP(u2rx_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(stmape_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(remap0_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(remap1_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(ptma9_oc1_1, NMK_GPIO_ALT_C1),
DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(rf_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(hxclk_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(uartmodrx_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(uartmodtx_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(stmmod_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(hxgpio_oc1_1, NMK_GPIO_ALT_C1),
+ DB8500_PIN_GROUP(rf_oc1_2, NMK_GPIO_ALT_C1),
DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C1),
DB8500_PIN_GROUP(spi2_oc1_2, NMK_GPIO_ALT_C1),
+ /* Other alt C2 column */
+ DB8500_PIN_GROUP(sbag_oc2_1, NMK_GPIO_ALT_C2),
+ DB8500_PIN_GROUP(etmr4_oc2_1, NMK_GPIO_ALT_C2),
+ DB8500_PIN_GROUP(ptma9_oc2_1, NMK_GPIO_ALT_C2),
+ /* Other alt C3 column */
+ DB8500_PIN_GROUP(stmmod_oc3_1, NMK_GPIO_ALT_C3),
+ DB8500_PIN_GROUP(stmmod_oc3_2, NMK_GPIO_ALT_C3),
+ DB8500_PIN_GROUP(uartmodrx_oc3_1, NMK_GPIO_ALT_C3),
+ DB8500_PIN_GROUP(uartmodtx_oc3_1, NMK_GPIO_ALT_C3),
+ DB8500_PIN_GROUP(etmr4_oc3_1, NMK_GPIO_ALT_C3),
+ /* Other alt C4 column */
+ DB8500_PIN_GROUP(sbag_oc4_1, NMK_GPIO_ALT_C4),
+ DB8500_PIN_GROUP(hwobs_oc4_1, NMK_GPIO_ALT_C4),
};
/* We use this macro to define the groups applicable to a function */
@@ -742,7 +826,7 @@ DB8500_FUNC_GROUPS(u1, "u1rxtx_a_1", "u1ctsrts_a_1");
* only available on two pins in alternative function C
*/
DB8500_FUNC_GROUPS(u2, "u2rxtx_b_1", "u2rxtx_c_1", "u2ctsrts_c_1",
- "u2rxtx_c_2", "u2rxtx_c_3");
+ "u2rxtx_c_2", "u2rxtx_c_3", "u2rx_oc1_1");
DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2");
/*
* MSP0 can only be on a certain set of pins, but the TX/RX pins can be
@@ -757,7 +841,7 @@ DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1");
DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1");
DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1",
"lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1");
-DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1");
+DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_a_2", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1");
DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1");
DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1");
DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1");
@@ -773,7 +857,8 @@ DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1");
DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1");
DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1_a_2", "mc1dir_a_1");
DB8500_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2");
-DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1");
+DB8500_FUNC_GROUPS(clkout, "clkout1_a_1", "clkout1_a_2", "clkout1_c_1",
+ "clkout2_a_1", "clkout2_a_2", "clkout2_c_1");
DB8500_FUNC_GROUPS(usb, "usb_a_1");
DB8500_FUNC_GROUPS(trig, "trig_b_1");
DB8500_FUNC_GROUPS(i2c4, "i2c4_b_1");
@@ -784,8 +869,10 @@ DB8500_FUNC_GROUPS(i2c2, "i2c2_b_1", "i2c2_b_2");
* so select one of each.
*/
DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2",
- "uartmodrx_c_1", "uartmod_tx_c_1");
-DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1");
+ "uartmodrx_c_1", "uartmod_tx_c_1", "uartmodrx_oc1_1",
+ "uartmodtx_oc1_1", "uartmodrx_oc3_1", "uartmodtx_oc3_1");
+DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1", "stmmod_oc1_1",
+ "stmmod_oc3_1", "stmmod_oc3_2");
DB8500_FUNC_GROUPS(spi3, "spi3_b_1");
/* Select between CS0 on alt B or PS1 on alt C */
DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcs1_b_1", "smcleale_c_1",
@@ -799,13 +886,19 @@ DB8500_FUNC_GROUPS(ipjtag, "ipjtag_c_1");
DB8500_FUNC_GROUPS(slim0, "slim0_c_1");
DB8500_FUNC_GROUPS(ms, "ms_c_1");
DB8500_FUNC_GROUPS(iptrigout, "iptrigout_c_1");
-DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2");
+DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2", "stmape_oc1_1");
DB8500_FUNC_GROUPS(mc5, "mc5_c_1");
DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2");
DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2");
DB8500_FUNC_GROUPS(spi0, "spi0_c_1");
DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1", "spi2_oc1_2");
-
+DB8500_FUNC_GROUPS(remap, "remap0_oc1_1", "remap1_oc1_1");
+DB8500_FUNC_GROUPS(sbag, "sbag_oc2_1", "sbag_oc4_1");
+DB8500_FUNC_GROUPS(ptm, "ptma9_oc1_1", "ptma9_oc2_1");
+DB8500_FUNC_GROUPS(rf, "rf_oc1_1", "rf_oc1_2");
+DB8500_FUNC_GROUPS(hx, "hxclk_oc1_1", "hxgpio_oc1_1");
+DB8500_FUNC_GROUPS(etm, "etmr4_oc2_1", "etmr4_oc3_1");
+DB8500_FUNC_GROUPS(hwobs, "hwobs_oc4_1");
#define FUNCTION(fname) \
{ \
.name = #fname, \
@@ -858,6 +951,12 @@ static const struct nmk_function nmk_db8500_functions[] = {
FUNCTION(i2c3),
FUNCTION(spi0),
FUNCTION(spi2),
+ FUNCTION(remap),
+ FUNCTION(ptm),
+ FUNCTION(rf),
+ FUNCTION(hx),
+ FUNCTION(etm),
+ FUNCTION(hwobs),
};
static const struct prcm_gpiocr_altcx_pin_desc db8500_altcx_pins[] = {
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8540.c b/drivers/pinctrl/pinctrl-nomadik-db8540.c
index 52fc30181f7e..bb6a4016322a 100644
--- a/drivers/pinctrl/pinctrl-nomadik-db8540.c
+++ b/drivers/pinctrl/pinctrl-nomadik-db8540.c
@@ -460,8 +460,10 @@ static const unsigned hsit_a_1_pins[] = { DB8540_PIN_B11, DB8540_PIN_B10,
DB8540_PIN_E10, DB8540_PIN_B12, DB8540_PIN_D10 };
static const unsigned hsit_a_2_pins[] = { DB8540_PIN_B11, DB8540_PIN_B10,
DB8540_PIN_E10, DB8540_PIN_B12 };
-static const unsigned clkout_a_1_pins[] = { DB8540_PIN_D11, DB8540_PIN_AJ6 };
-static const unsigned clkout_a_2_pins[] = { DB8540_PIN_B13, DB8540_PIN_C12 };
+static const unsigned clkout1_a_1_pins[] = { DB8540_PIN_D11 };
+static const unsigned clkout1_a_2_pins[] = { DB8540_PIN_B13 };
+static const unsigned clkout2_a_1_pins[] = { DB8540_PIN_AJ6 };
+static const unsigned clkout2_a_2_pins[] = { DB8540_PIN_C12 };
static const unsigned msp4_a_1_pins[] = { DB8540_PIN_B14, DB8540_PIN_E11 };
static const unsigned usb_a_1_pins[] = { DB8540_PIN_D12, DB8540_PIN_D15,
DB8540_PIN_C13, DB8540_PIN_C14, DB8540_PIN_C18, DB8540_PIN_C16,
@@ -698,8 +700,10 @@ static const struct nmk_pingroup nmk_db8540_groups[] = {
DB8540_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
DB8540_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
DB8540_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
- DB8540_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
- DB8540_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
+ DB8540_PIN_GROUP(clkout1_a_1, NMK_GPIO_ALT_A),
+ DB8540_PIN_GROUP(clkout1_a_2, NMK_GPIO_ALT_A),
+ DB8540_PIN_GROUP(clkout2_a_1, NMK_GPIO_ALT_A),
+ DB8540_PIN_GROUP(clkout2_a_2, NMK_GPIO_ALT_A),
DB8540_PIN_GROUP(msp4_a_1, NMK_GPIO_ALT_A),
DB8540_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
/* Altfunction B column */
@@ -822,6 +826,7 @@ static const struct nmk_pingroup nmk_db8540_groups[] = {
DB8540_PIN_GROUP(modaccuarttxrx_oc4_1, NMK_GPIO_ALT_C4),
DB8540_PIN_GROUP(modaccuartrtscts_oc4_1, NMK_GPIO_ALT_C4),
DB8540_PIN_GROUP(stmmod_oc4_1, NMK_GPIO_ALT_C4),
+ DB8540_PIN_GROUP(moduartstmmux_oc4_1, NMK_GPIO_ALT_C4),
};
@@ -830,7 +835,8 @@ static const struct nmk_pingroup nmk_db8540_groups[] = {
static const char * const a##_groups[] = { b };
DB8540_FUNC_GROUPS(apetrig, "apetrig_b_1");
-DB8540_FUNC_GROUPS(clkout, "clkoutreq_a_1", "clkout_a_1", "clkout_a_2");
+DB8540_FUNC_GROUPS(clkout, "clkoutreq_a_1", "clkout1_a_1", "clkout1_a_2",
+ "clkout2_a_1", "clkout2_a_2");
DB8540_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1");
DB8540_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2");
DB8540_FUNC_GROUPS(hwobs, "hwobs_oc4_1");
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index cf82d9ce4dee..8ef3e85cb011 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -30,26 +30,10 @@
#include <linux/pinctrl/pinconf.h>
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
-/*
- * For the U8500 archs, use the PRCMU register interface, for the older
- * Nomadik, provide some stubs. The functions using these will only be
- * called on the U8500 series.
- */
-#ifdef CONFIG_ARCH_U8500
-#include <linux/mfd/dbx500-prcmu.h>
-#else
-static inline u32 prcmu_read(unsigned int reg) {
- return 0;
-}
-static inline void prcmu_write(unsigned int reg, u32 value) {}
-static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
-#endif
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach/irq.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-
#include "pinctrl-nomadik.h"
/*
@@ -60,8 +44,6 @@ static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
* Symbols in this file are called "nmk_gpio" for "nomadik gpio"
*/
-#define NMK_GPIO_PER_CHIP 32
-
struct nmk_gpio_chip {
struct gpio_chip chip;
struct irq_domain *domain;
@@ -86,10 +68,18 @@ struct nmk_gpio_chip {
u32 lowemi;
};
+/**
+ * struct nmk_pinctrl - state container for the Nomadik pin controller
+ * @dev: containing device pointer
+ * @pctl: corresponding pin controller device
+ * @soc: SoC data for this specific chip
+ * @prcm_base: PRCM register range virtual base
+ */
struct nmk_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
const struct nmk_pinctrl_soc_data *soc;
+ void __iomem *prcm_base;
};
static struct nmk_gpio_chip *
@@ -251,6 +241,15 @@ nmk_gpio_disable_lazy_irq(struct nmk_gpio_chip *nmk_chip, unsigned offset)
dev_dbg(nmk_chip->chip.dev, "%d: clearing interrupt mask\n", gpio);
}
+static void nmk_write_masked(void __iomem *reg, u32 mask, u32 value)
+{
+ u32 val;
+
+ val = readl(reg);
+ val = ((val & ~mask) | (value & mask));
+ writel(val, reg);
+}
+
static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
unsigned offset, unsigned alt_num)
{
@@ -289,8 +288,8 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
if (pin_desc->altcx[i].used == true) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
- if (prcmu_read(reg) & BIT(bit)) {
- prcmu_write_masked(reg, BIT(bit), 0);
+ if (readl(npct->prcm_base + reg) & BIT(bit)) {
+ nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0);
dev_dbg(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
offset, i+1);
@@ -318,8 +317,8 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
if (pin_desc->altcx[i].used == true) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
- if (prcmu_read(reg) & BIT(bit)) {
- prcmu_write_masked(reg, BIT(bit), 0);
+ if (readl(npct->prcm_base + reg) & BIT(bit)) {
+ nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0);
dev_dbg(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
offset, i+1);
@@ -331,7 +330,7 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
bit = pin_desc->altcx[alt_index].control_bit;
dev_dbg(npct->dev, "PRCM GPIOCR: pin %i: alternate-C%i has been selected\n",
offset, alt_index+1);
- prcmu_write_masked(reg, BIT(bit), BIT(bit));
+ nmk_write_masked(npct->prcm_base + reg, BIT(bit), BIT(bit));
}
static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
@@ -536,7 +535,7 @@ static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
* and its sleep mode based on the specified configuration. The @cfg is
* usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
* are constructed using, and can be further enhanced with, the macros in
- * plat/pincfg.h.
+ * <linux/platform_data/pinctrl-nomadik.h>
*
* If a pin's mode is set to GPIO, it is configured as an input to avoid
* side-effects. The gpio can be manipulated later using standard GPIO API
@@ -675,6 +674,35 @@ int nmk_gpio_set_mode(int gpio, int gpio_mode)
}
EXPORT_SYMBOL(nmk_gpio_set_mode);
+static int nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio)
+{
+ int i;
+ u16 reg;
+ u8 bit;
+ struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+ const struct prcm_gpiocr_altcx_pin_desc *pin_desc;
+ const u16 *gpiocr_regs;
+
+ for (i = 0; i < npct->soc->npins_altcx; i++) {
+ if (npct->soc->altcx_pins[i].pin == gpio)
+ break;
+ }
+ if (i == npct->soc->npins_altcx)
+ return NMK_GPIO_ALT_C;
+
+ pin_desc = npct->soc->altcx_pins + i;
+ gpiocr_regs = npct->soc->prcm_gpiocr_registers;
+ for (i = 0; i < PRCM_IDX_GPIOCR_ALTC_MAX; i++) {
+ if (pin_desc->altcx[i].used == true) {
+ reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
+ bit = pin_desc->altcx[i].control_bit;
+ if (readl(npct->prcm_base + reg) & BIT(bit))
+ return NMK_GPIO_ALT_C+i+1;
+ }
+ }
+ return NMK_GPIO_ALT_C;
+}
+
int nmk_gpio_get_mode(int gpio)
{
struct nmk_gpio_chip *nmk_chip;
@@ -1063,8 +1091,9 @@ static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
#include <linux/seq_file.h>
-static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip,
- unsigned offset, unsigned gpio)
+static void nmk_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
{
const char *label = gpiochip_is_requested(chip, offset);
struct nmk_gpio_chip *nmk_chip =
@@ -1078,12 +1107,18 @@ static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip,
[NMK_GPIO_ALT_A] = "altA",
[NMK_GPIO_ALT_B] = "altB",
[NMK_GPIO_ALT_C] = "altC",
+ [NMK_GPIO_ALT_C+1] = "altC1",
+ [NMK_GPIO_ALT_C+2] = "altC2",
+ [NMK_GPIO_ALT_C+3] = "altC3",
+ [NMK_GPIO_ALT_C+4] = "altC4",
};
clk_enable(nmk_chip->clk);
is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit);
pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
mode = nmk_gpio_get_mode(gpio);
+ if ((mode == NMK_GPIO_ALT_C) && pctldev)
+ mode = nmk_prcm_gpiocr_get_mode(pctldev, gpio);
seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
gpio, label ?: "(none)",
@@ -1127,13 +1162,14 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
unsigned gpio = chip->base;
for (i = 0; i < chip->ngpio; i++, gpio++) {
- nmk_gpio_dbg_show_one(s, chip, i, gpio);
+ nmk_gpio_dbg_show_one(s, NULL, chip, i, gpio);
seq_printf(s, "\n");
}
}
#else
static inline void nmk_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
struct gpio_chip *chip,
unsigned offset, unsigned gpio)
{
@@ -1250,8 +1286,8 @@ void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up)
}
}
-int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hwirq)
+static int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
{
struct nmk_gpio_chip *nmk_chip = d->host_data;
@@ -1464,7 +1500,7 @@ static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
return;
}
chip = range->gc;
- nmk_gpio_dbg_show_one(s, chip, offset - chip->base, offset);
+ nmk_gpio_dbg_show_one(s, pctldev, chip, offset - chip->base, offset);
}
static struct pinctrl_ops nmk_pinctrl_ops = {
@@ -1635,9 +1671,9 @@ static void nmk_pmx_disable(struct pinctrl_dev *pctldev,
dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins);
}
-int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
+static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
struct nmk_gpio_chip *nmk_chip;
@@ -1666,9 +1702,9 @@ int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
return 0;
}
-void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
+static void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
@@ -1686,17 +1722,15 @@ static struct pinmux_ops nmk_pinmux_ops = {
.gpio_disable_free = nmk_gpio_disable_free,
};
-int nmk_pin_config_get(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *config)
+static int nmk_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
{
/* Not implemented */
return -EINVAL;
}
-int nmk_pin_config_set(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long config)
+static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
{
static const char *pullnames[] = {
[NMK_GPIO_PULL_NONE] = "none",
@@ -1818,6 +1852,7 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
const struct platform_device_id *platid = platform_get_device_id(pdev);
struct device_node *np = pdev->dev.of_node;
struct nmk_pinctrl *npct;
+ struct resource *res;
unsigned int version = 0;
int i;
@@ -1827,9 +1862,14 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
if (platid)
version = platid->driver_data;
- else if (np)
- version = (unsigned int)
- of_match_device(nmk_pinctrl_match, &pdev->dev)->data;
+ else if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_device(nmk_pinctrl_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+ version = (unsigned int) match->data;
+ }
/* Poke in other ASIC variants here */
if (version == PINCTRL_NMK_STN8815)
@@ -1839,22 +1879,37 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
if (version == PINCTRL_NMK_DB8540)
nmk_pinctrl_db8540_init(&npct->soc);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res) {
+ npct->prcm_base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!npct->prcm_base) {
+ dev_err(&pdev->dev,
+ "failed to ioremap PRCM registers\n");
+ return -ENOMEM;
+ }
+ } else {
+ dev_info(&pdev->dev,
+ "No PRCM base, assume no ALT-Cx control is available\n");
+ }
+
/*
* We need all the GPIO drivers to probe FIRST, or we will not be able
* to obtain references to the struct gpio_chip * for them, and we
* need this to proceed.
*/
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
- if (!nmk_gpio_chips[i]) {
+ if (!nmk_gpio_chips[npct->soc->gpio_ranges[i].id]) {
dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
return -EPROBE_DEFER;
}
- npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
+ npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[npct->soc->gpio_ranges[i].id]->chip;
}
nmk_pinctrl_desc.pins = npct->soc->pins;
nmk_pinctrl_desc.npins = npct->soc->npins;
npct->dev = &pdev->dev;
+
npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct);
if (!npct->pctl) {
dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n");
@@ -1889,6 +1944,7 @@ static const struct platform_device_id nmk_pinctrl_id[] = {
{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
{ "pinctrl-db8540", PINCTRL_NMK_DB8540 },
+ { }
};
static struct platform_driver nmk_pinctrl_driver = {
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index eef316e979a0..bcd4191e10ea 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,7 +1,7 @@
#ifndef PINCTRL_PINCTRL_NOMADIK_H
#define PINCTRL_PINCTRL_NOMADIK_H
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
/* Package definitions */
#define PINCTRL_NMK_STN8815 0
diff --git a/drivers/pinctrl/pinctrl-pxa3xx.c b/drivers/pinctrl/pinctrl-pxa3xx.c
index f14cd6ba4c0b..51f8a388b917 100644
--- a/drivers/pinctrl/pinctrl-pxa3xx.c
+++ b/drivers/pinctrl/pinctrl-pxa3xx.c
@@ -173,7 +173,6 @@ int pxa3xx_pinctrl_register(struct platform_device *pdev,
{
struct pinctrl_desc *desc;
struct resource *res;
- int ret = 0;
if (!info || !info->cputype)
return -EINVAL;
@@ -188,23 +187,17 @@ int pxa3xx_pinctrl_register(struct platform_device *pdev,
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENOENT;
- info->phy_base = res->start;
- info->phy_size = resource_size(res);
- info->virt_base = ioremap(info->phy_base, info->phy_size);
+ info->virt_base = devm_request_and_ioremap(&pdev->dev, res);
if (!info->virt_base)
return -ENOMEM;
info->pctrl = pinctrl_register(desc, &pdev->dev, info);
if (!info->pctrl) {
dev_err(&pdev->dev, "failed to register PXA pinmux driver\n");
- ret = -EINVAL;
- goto err;
+ return -EINVAL;
}
pinctrl_add_gpio_range(info->pctrl, &pxa3xx_pinctrl_gpio_range);
platform_set_drvdata(pdev, info);
return 0;
-err:
- iounmap(info->virt_base);
- return ret;
}
int pxa3xx_pinctrl_unregister(struct platform_device *pdev)
@@ -212,7 +205,6 @@ int pxa3xx_pinctrl_unregister(struct platform_device *pdev)
struct pxa3xx_pinmux_info *info = platform_get_drvdata(pdev);
pinctrl_unregister(info->pctrl);
- iounmap(info->virt_base);
platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/pinctrl/pinctrl-pxa3xx.h b/drivers/pinctrl/pinctrl-pxa3xx.h
index 8135744d6599..92fad0880834 100644
--- a/drivers/pinctrl/pinctrl-pxa3xx.h
+++ b/drivers/pinctrl/pinctrl-pxa3xx.h
@@ -60,8 +60,6 @@ struct pxa3xx_pinmux_info {
struct device *dev;
struct pinctrl_dev *pctrl;
enum pxa_cpu_type cputype;
- unsigned int phy_base;
- unsigned int phy_size;
void __iomem *virt_base;
struct pxa3xx_mfp_pin *mfp;
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 726a729a2ec9..e8dbb94494d3 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -30,6 +30,7 @@
#define PCS_MUX_BITS_NAME "pinctrl-single,bits"
#define PCS_REG_NAME_LEN ((sizeof(unsigned long) * 2) + 1)
#define PCS_OFF_DISABLED ~0U
+#define PCS_MAX_GPIO_VALUES 2
/**
* struct pcs_pingroup - pingroups for a function
@@ -77,6 +78,16 @@ struct pcs_function {
};
/**
+ * struct pcs_gpio_range - pinctrl gpio range
+ * @range: subrange of the GPIO number space
+ * @gpio_func: gpio function value in the pinmux register
+ */
+struct pcs_gpio_range {
+ struct pinctrl_gpio_range range;
+ int gpio_func;
+};
+
+/**
* struct pcs_data - wrapper for data needed by pinctrl framework
* @pa: pindesc array
* @cur: index to current element
@@ -244,15 +255,15 @@ static int pcs_get_group_pins(struct pinctrl_dev *pctldev,
static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
- unsigned offset)
+ unsigned pin)
{
struct pcs_device *pcs;
- unsigned val;
+ unsigned val, mux_bytes;
pcs = pinctrl_dev_get_drvdata(pctldev);
- val = pcs->read(pcs->base + offset);
- val &= pcs->fmask;
+ mux_bytes = pcs->width / BITS_PER_BYTE;
+ val = pcs->read(pcs->base + pin * mux_bytes);
seq_printf(s, "%08x %s " , val, DRIVER_NAME);
}
@@ -403,9 +414,26 @@ static void pcs_disable(struct pinctrl_dev *pctldev, unsigned fselector,
}
static int pcs_request_gpio(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range, unsigned offset)
+ struct pinctrl_gpio_range *range, unsigned pin)
{
- return -ENOTSUPP;
+ struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
+ struct pcs_gpio_range *gpio = NULL;
+ int end, mux_bytes;
+ unsigned data;
+
+ gpio = container_of(range, struct pcs_gpio_range, range);
+ end = range->pin_base + range->npins - 1;
+ if (pin < range->pin_base || pin > end) {
+ dev_err(pctldev->dev,
+ "pin %d isn't in the range of %d to %d\n",
+ pin, range->pin_base, end);
+ return -EINVAL;
+ }
+ mux_bytes = pcs->width / BITS_PER_BYTE;
+ data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
+ data |= gpio->gpio_func;
+ pcs->write(data, pcs->base + pin * mux_bytes);
+ return 0;
}
static struct pinmux_ops pcs_pinmux_ops = {
@@ -879,6 +907,50 @@ static void pcs_free_resources(struct pcs_device *pcs)
static struct of_device_id pcs_of_match[];
+static int __devinit pcs_add_gpio_range(struct device_node *node,
+ struct pcs_device *pcs)
+{
+ struct pcs_gpio_range *gpio;
+ struct device_node *child;
+ struct resource r;
+ const char name[] = "pinctrl-single";
+ u32 gpiores[PCS_MAX_GPIO_VALUES];
+ int ret, i = 0, mux_bytes = 0;
+
+ for_each_child_of_node(node, child) {
+ ret = of_address_to_resource(child, 0, &r);
+ if (ret < 0)
+ continue;
+ memset(gpiores, 0, sizeof(u32) * PCS_MAX_GPIO_VALUES);
+ ret = of_property_read_u32_array(child, "pinctrl-single,gpio",
+ gpiores, PCS_MAX_GPIO_VALUES);
+ if (ret < 0)
+ continue;
+ gpio = devm_kzalloc(pcs->dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio) {
+ dev_err(pcs->dev, "failed to allocate pcs gpio\n");
+ return -ENOMEM;
+ }
+ gpio->range.name = devm_kzalloc(pcs->dev, sizeof(name),
+ GFP_KERNEL);
+ if (!gpio->range.name) {
+ dev_err(pcs->dev, "failed to allocate range name\n");
+ return -ENOMEM;
+ }
+ memcpy((char *)gpio->range.name, name, sizeof(name));
+
+ gpio->range.id = i++;
+ gpio->range.base = gpiores[0];
+ gpio->gpio_func = gpiores[1];
+ mux_bytes = pcs->width / BITS_PER_BYTE;
+ gpio->range.pin_base = (r.start - pcs->res->start) / mux_bytes;
+ gpio->range.npins = (r.end - r.start) / mux_bytes + 1;
+
+ pinctrl_add_gpio_range(pcs->pctl, &gpio->range);
+ }
+ return 0;
+}
+
static int __devinit pcs_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -975,6 +1047,10 @@ static int __devinit pcs_probe(struct platform_device *pdev)
goto free;
}
+ ret = pcs_add_gpio_range(np, pcs);
+ if (ret < 0)
+ goto free;
+
dev_info(pcs->dev, "%i pins at pa %p size %u\n",
pcs->desc.npins, pcs->base, pcs->size);
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index 7da0b371fd65..e9f80a54b3d0 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -178,8 +178,9 @@ static int add_config(struct device *dev, unsigned long **configs,
return 0;
}
-void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *map, unsigned num_maps)
+static void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map,
+ unsigned num_maps)
{
int i;
@@ -209,11 +210,11 @@ static const struct cfg_param {
{"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING},
};
-int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
- struct device_node *np,
- struct pinctrl_map **map,
- unsigned *reserved_maps,
- unsigned *num_maps)
+static int tegra_pinctrl_dt_subnode_to_map(struct device *dev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *reserved_maps,
+ unsigned *num_maps)
{
int ret, i;
const char *function;
@@ -288,9 +289,10 @@ exit:
return ret;
}
-int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config,
- struct pinctrl_map **map, unsigned *num_maps)
+static int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
{
unsigned reserved_maps;
struct device_node *np;
@@ -660,7 +662,7 @@ static void tegra_pinconf_config_dbg_show(struct pinctrl_dev *pctldev,
}
#endif
-struct pinconf_ops tegra_pinconf_ops = {
+static struct pinconf_ops tegra_pinconf_ops = {
.pin_config_get = tegra_pinconf_get,
.pin_config_set = tegra_pinconf_set,
.pin_config_group_get = tegra_pinconf_group_get,
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index d756cce588fd..b84de03ed54d 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -1011,51 +1011,11 @@ static struct pinmux_ops u300_pmx_ops = {
.disable = u300_pmx_disable,
};
-/*
- * GPIO ranges handled by the application-side COH901XXX GPIO controller
- * Very many pins can be converted into GPIO pins, but we only list those
- * that are useful in practice to cut down on tables.
- */
-#define U300_GPIO_RANGE(a, b, c) { .name = "COH901XXX", .id = a, .base= a, \
- .pin_base = b, .npins = c }
-
-static struct pinctrl_gpio_range u300_gpio_ranges[] = {
- U300_GPIO_RANGE(10, 426, 1),
- U300_GPIO_RANGE(11, 180, 1),
- U300_GPIO_RANGE(12, 165, 1), /* MS/MMC card insertion */
- U300_GPIO_RANGE(13, 179, 1),
- U300_GPIO_RANGE(14, 178, 1),
- U300_GPIO_RANGE(16, 194, 1),
- U300_GPIO_RANGE(17, 193, 1),
- U300_GPIO_RANGE(18, 192, 1),
- U300_GPIO_RANGE(19, 191, 1),
- U300_GPIO_RANGE(20, 186, 1),
- U300_GPIO_RANGE(21, 185, 1),
- U300_GPIO_RANGE(22, 184, 1),
- U300_GPIO_RANGE(23, 183, 1),
- U300_GPIO_RANGE(24, 182, 1),
- U300_GPIO_RANGE(25, 181, 1),
-};
-
-static struct pinctrl_gpio_range *u300_match_gpio_range(unsigned pin)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++) {
- struct pinctrl_gpio_range *range;
-
- range = &u300_gpio_ranges[i];
- if (pin >= range->pin_base &&
- pin <= (range->pin_base + range->npins - 1))
- return range;
- }
- return NULL;
-}
-
static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *config)
{
- struct pinctrl_gpio_range *range = u300_match_gpio_range(pin);
+ struct pinctrl_gpio_range *range =
+ pinctrl_find_gpio_range_from_pin(pctldev, pin);
/* We get config for those pins we CAN get it for and that's it */
if (!range)
@@ -1069,7 +1029,8 @@ static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long config)
{
- struct pinctrl_gpio_range *range = u300_match_gpio_range(pin);
+ struct pinctrl_gpio_range *range =
+ pinctrl_find_gpio_range_from_pin(pctldev, pin);
int ret;
if (!range)
@@ -1105,8 +1066,6 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev)
{
struct u300_pmx *upmx;
struct resource *res;
- struct gpio_chip *gpio_chip = dev_get_platdata(&pdev->dev);
- int i;
/* Create state holders etc for this driver */
upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
@@ -1129,12 +1088,6 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev)
return -EINVAL;
}
- /* We will handle a range of GPIO pins */
- for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++) {
- u300_gpio_ranges[i].gc = gpio_chip;
- pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
- }
-
platform_set_drvdata(pdev, upmx);
dev_info(&pdev->dev, "initialized U300 pin control driver\n");
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index b9bcaec66223..ad90984ec500 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -522,7 +522,7 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
return 0;
}
-struct pinconf_ops xway_pinconf_ops = {
+static struct pinconf_ops xway_pinconf_ops = {
.pin_config_get = xway_pinconf_get,
.pin_config_set = xway_pinconf_set,
};
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index 0ef01ee2835f..1a00658b3ea0 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -409,11 +409,7 @@ int pinmux_enable_setting(struct pinctrl_setting const *setting)
dev_err(pctldev->dev,
"could not request pin %d on device %s\n",
pins[i], pinctrl_dev_get_name(pctldev));
- /* On error release all taken pins */
- i--; /* this pin just failed */
- for (; i >= 0; i--)
- pin_free(pctldev, pins[i], NULL);
- return -ENODEV;
+ goto err_pin_request;
}
}
@@ -429,8 +425,26 @@ int pinmux_enable_setting(struct pinctrl_setting const *setting)
desc->mux_setting = &(setting->data.mux);
}
- return ops->enable(pctldev, setting->data.mux.func,
- setting->data.mux.group);
+ ret = ops->enable(pctldev, setting->data.mux.func,
+ setting->data.mux.group);
+
+ if (ret)
+ goto err_enable;
+
+ return 0;
+
+err_enable:
+ for (i = 0; i < num_pins; i++) {
+ desc = pin_desc_get(pctldev, pins[i]);
+ if (desc)
+ desc->mux_setting = NULL;
+ }
+err_pin_request:
+ /* On error release all taken pins */
+ while (--i >= 0)
+ pin_free(pctldev, pins[i], NULL);
+
+ return ret;
}
void pinmux_disable_setting(struct pinctrl_setting const *setting)
diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c
index 1044ad3f3c86..5aebbf780fb5 100644
--- a/drivers/pinctrl/spear/pinctrl-plgpio.c
+++ b/drivers/pinctrl/spear/pinctrl-plgpio.c
@@ -213,7 +213,7 @@ static int plgpio_request(struct gpio_chip *chip, unsigned offset)
return ret;
if (!IS_ERR(plgpio->clk)) {
- ret = clk_prepare_enable(plgpio->clk);
+ ret = clk_enable(plgpio->clk);
if (ret)
goto err0;
}
@@ -243,7 +243,8 @@ static int plgpio_request(struct gpio_chip *chip, unsigned offset)
return 0;
err1:
- clk_disable_unprepare(plgpio->clk);
+ if (!IS_ERR(plgpio->clk))
+ clk_disable(plgpio->clk);
err0:
pinctrl_free_gpio(gpio);
return ret;
@@ -274,7 +275,7 @@ static void plgpio_free(struct gpio_chip *chip, unsigned offset)
disable_clk:
if (!IS_ERR(plgpio->clk))
- clk_disable_unprepare(plgpio->clk);
+ clk_disable(plgpio->clk);
pinctrl_free_gpio(gpio);
}
@@ -583,10 +584,18 @@ static int __devinit plgpio_probe(struct platform_device *pdev)
plgpio->chip.dev = &pdev->dev;
plgpio->chip.owner = THIS_MODULE;
+ if (!IS_ERR(plgpio->clk)) {
+ ret = clk_prepare(plgpio->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "clk prepare failed\n");
+ return ret;
+ }
+ }
+
ret = gpiochip_add(&plgpio->chip);
if (ret) {
dev_err(&pdev->dev, "unable to add gpio chip\n");
- return ret;
+ goto unprepare_clk;
}
irq = platform_get_irq(pdev, 0);
@@ -628,6 +637,9 @@ remove_gpiochip:
dev_info(&pdev->dev, "Remove gpiochip\n");
if (gpiochip_remove(&plgpio->chip))
dev_err(&pdev->dev, "unable to remove gpiochip\n");
+unprepare_clk:
+ if (!IS_ERR(plgpio->clk))
+ clk_unprepare(plgpio->clk);
return ret;
}
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index cbca6dc66eb7..bf78eb7f85c4 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -14,7 +14,6 @@
*/
#include <linux/err.h>
-#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -29,16 +28,6 @@
#define DRIVER_NAME "spear-pinmux"
-static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg)
-{
- return readl_relaxed(pmx->vbase + reg);
-}
-
-static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg)
-{
- writel_relaxed(val, pmx->vbase + reg);
-}
-
static void muxregs_endisable(struct spear_pmx *pmx,
struct spear_muxreg *muxregs, u8 count, bool enable)
{
@@ -97,10 +86,10 @@ void __devinit
pmx_init_gpio_pingroup_addr(struct spear_gpio_pingroup *gpio_pingroup,
unsigned count, u16 reg)
{
- int i = 0, j = 0;
+ int i, j;
- for (; i < count; i++)
- for (; j < gpio_pingroup[i].nmuxregs; j++)
+ for (i = 0; i < count; i++)
+ for (j = 0; j < gpio_pingroup[i].nmuxregs; j++)
gpio_pingroup[i].muxregs[j].reg = reg;
}
@@ -155,9 +144,10 @@ static void spear_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
seq_printf(s, " " DRIVER_NAME);
}
-int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config,
- struct pinctrl_map **map, unsigned *num_maps)
+static int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
{
struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
struct device_node *np;
@@ -202,8 +192,9 @@ int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
return 0;
}
-void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *map, unsigned num_maps)
+static void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map,
+ unsigned num_maps)
{
kfree(map);
}
@@ -295,12 +286,12 @@ static struct spear_gpio_pingroup *get_gpio_pingroup(struct spear_pmx *pmx,
unsigned pin)
{
struct spear_gpio_pingroup *gpio_pingroup;
- int i = 0, j;
+ int i, j;
if (!pmx->machdata->gpio_pingroups)
return NULL;
- for (; i < pmx->machdata->ngpio_pingroups; i++) {
+ for (i = 0; i < pmx->machdata->ngpio_pingroups; i++) {
gpio_pingroup = &pmx->machdata->gpio_pingroups[i];
for (j = 0; j < gpio_pingroup->npins; j++) {
@@ -309,23 +300,32 @@ static struct spear_gpio_pingroup *get_gpio_pingroup(struct spear_pmx *pmx,
}
}
- return ERR_PTR(-EINVAL);
+ return NULL;
}
static int gpio_request_endisable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool enable)
{
struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+ struct spear_pinctrl_machdata *machdata = pmx->machdata;
struct spear_gpio_pingroup *gpio_pingroup;
+ /*
+ * Some SoC have configuration options applicable to group of pins,
+ * rather than a single pin.
+ */
gpio_pingroup = get_gpio_pingroup(pmx, offset);
- if (IS_ERR(gpio_pingroup))
- return PTR_ERR(gpio_pingroup);
-
if (gpio_pingroup)
muxregs_endisable(pmx, gpio_pingroup->muxregs,
gpio_pingroup->nmuxregs, enable);
+ /*
+ * SoC may need some extra configurations, or configurations for single
+ * pin
+ */
+ if (machdata->gpio_request_endisable)
+ machdata->gpio_request_endisable(pmx, offset, enable);
+
return 0;
}
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 94f142c10c19..b06332719b2c 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -13,11 +13,13 @@
#define __PINMUX_SPEAR_H__
#include <linux/gpio.h>
+#include <linux/io.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/types.h>
struct platform_device;
struct device;
+struct spear_pmx;
/**
* struct spear_pmx_mode - SPEAr pmx mode
@@ -155,6 +157,8 @@ struct spear_pinctrl_machdata {
struct spear_pingroup **groups;
unsigned ngroups;
struct spear_gpio_pingroup *gpio_pingroups;
+ void (*gpio_request_endisable)(struct spear_pmx *pmx, int offset,
+ bool enable);
unsigned ngpio_pingroups;
bool modes_supported;
@@ -178,6 +182,16 @@ struct spear_pmx {
};
/* exported routines */
+static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg)
+{
+ return readl_relaxed(pmx->vbase + reg);
+}
+
+static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg)
+{
+ writel_relaxed(val, pmx->vbase + reg);
+}
+
void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
void __devinit
pmx_init_gpio_pingroup_addr(struct spear_gpio_pingroup *gpio_pingroup,
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index 0606b8cf3f2c..0b4af0e5cdc1 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -1971,6 +1971,32 @@ static struct spear_function *spear1340_functions[] = {
&sata_function,
};
+static void gpio_request_endisable(struct spear_pmx *pmx, int pin,
+ bool enable)
+{
+ unsigned int regoffset, regindex, bitoffset;
+ unsigned int val;
+
+ /* pin++ as gpio configuration starts from 2nd bit of base register */
+ pin++;
+
+ regindex = pin / 32;
+ bitoffset = pin % 32;
+
+ if (regindex <= 3)
+ regoffset = PAD_FUNCTION_EN_1 + regindex * sizeof(int *);
+ else
+ regoffset = PAD_FUNCTION_EN_5 + (regindex - 4) * sizeof(int *);
+
+ val = pmx_readl(pmx, regoffset);
+ if (enable)
+ val &= ~(0x1 << bitoffset);
+ else
+ val |= 0x1 << bitoffset;
+
+ pmx_writel(pmx, val, regoffset);
+}
+
static struct spear_pinctrl_machdata spear1340_machdata = {
.pins = spear1340_pins,
.npins = ARRAY_SIZE(spear1340_pins),
@@ -1978,6 +2004,7 @@ static struct spear_pinctrl_machdata spear1340_machdata = {
.ngroups = ARRAY_SIZE(spear1340_pingroups),
.functions = spear1340_functions,
.nfunctions = ARRAY_SIZE(spear1340_functions),
+ .gpio_request_endisable = gpio_request_endisable,
.modes_supported = false,
};