diff options
Diffstat (limited to 'drivers/platform/x86/acerhdf.c')
| -rw-r--r-- | drivers/platform/x86/acerhdf.c | 118 |
1 files changed, 79 insertions, 39 deletions
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index bdfee177eefb..034ca6d9081d 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.13" +#define DRV_VER "0.5.16" /* * According to the Atom N270 datasheet, @@ -61,7 +61,7 @@ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, * assume 89°C is critical temperature. */ -#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_TEMP_CRIT 89000 #define ACERHDF_FAN_OFF 0 #define ACERHDF_FAN_AUTO 1 @@ -69,7 +69,7 @@ * No matter what value the user puts into the fanon variable, turn on the fan * at 80 degree Celsius to prevent hardware damage */ -#define ACERHDF_MAX_FANON 80 +#define ACERHDF_MAX_FANON 80000 /* * Maximum interval between two temperature checks is 15 seconds, as the die @@ -85,11 +85,12 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63; -static unsigned int fanoff = 58; +static unsigned int fanon = 63000; +static unsigned int fanoff = 58000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; +static char force_product[16]; static unsigned int prev_interval; struct thermal_zone_device *thz_dev; struct thermal_cooling_device *cl_dev; @@ -107,34 +108,62 @@ module_param(verbose, uint, 0600); MODULE_PARM_DESC(verbose, "Enable verbose dmesg output"); module_param_string(force_bios, force_bios, 16, 0); MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check"); +module_param_string(force_product, force_product, 16, 0); +MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check"); + +/* + * cmd_off: to switch the fan completely off / to check if the fan is off + * cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then + * the fan speed depending on the temperature + */ +struct fancmd { + u8 cmd_off; + u8 cmd_auto; +}; /* BIOS settings */ struct bios_settings_t { const char *vendor; + const char *product; const char *version; unsigned char fanreg; unsigned char tempreg; - unsigned char fancmd[2]; /* fan off and auto commands */ + struct fancmd cmd; }; /* Register addresses and values for different BIOS versions */ static const struct bios_settings_t bios_tbl[] = { - {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} }, - {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} }, - {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} }, - {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} }, - {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} }, - {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} }, - {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} }, - {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} }, - {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, - {"", "", 0, 0, {0, 0} } + /* AOA110 */ + {"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} }, + {"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} }, + {"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} }, + {"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} }, + {"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} }, + {"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} }, + /* AOA150 */ + {"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, + /* special BIOS / other */ + {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, + {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + /* pewpew-terminator */ + {"", "", "", 0, 0, {0, 0} } }; static const struct bios_settings_t *bios_cfg __read_mostly; - static int acerhdf_get_temp(int *temp) { u8 read_temp; @@ -142,7 +171,7 @@ static int acerhdf_get_temp(int *temp) if (ec_read(bios_cfg->tempreg, &read_temp)) return -EINVAL; - *temp = read_temp; + *temp = read_temp * 1000; return 0; } @@ -150,13 +179,14 @@ static int acerhdf_get_temp(int *temp) static int acerhdf_get_fanstate(int *state) { u8 fan; - bool tmp; if (ec_read(bios_cfg->fanreg, &fan)) return -EINVAL; - tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]); - *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO; + if (fan != bios_cfg->cmd.cmd_off) + *state = ACERHDF_FAN_AUTO; + else + *state = ACERHDF_FAN_OFF; return 0; } @@ -175,7 +205,8 @@ static void acerhdf_change_fanstate(int state) state = ACERHDF_FAN_AUTO; } - cmd = bios_cfg->fancmd[state]; + cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off + : bios_cfg->cmd.cmd_auto; fanstate = state; ec_write(bios_cfg->fanreg, cmd); @@ -437,7 +468,7 @@ static int acerhdf_remove(struct platform_device *device) return 0; } -struct platform_driver acerhdf_drv = { +static struct platform_driver acerhdf_driver = { .driver = { .name = "acerhdf", .owner = THIS_MODULE, @@ -454,32 +485,40 @@ static int acerhdf_check_hardware(void) { char const *vendor, *version, *product; int i; + unsigned long prod_len = 0; /* get BIOS data */ vendor = dmi_get_system_info(DMI_SYS_VENDOR); version = dmi_get_system_info(DMI_BIOS_VERSION); product = dmi_get_system_info(DMI_PRODUCT_NAME); + pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER); - if (!force_bios[0]) { - if (strncmp(product, "AO", 2)) { - pr_err("no Aspire One hardware found\n"); - return -EINVAL; - } - } else { - pr_info("forcing BIOS version: %s\n", version); + if (force_bios[0]) { version = force_bios; + pr_info("forcing BIOS version: %s\n", version); kernelmode = 0; } + if (force_product[0]) { + product = force_product; + pr_info("forcing BIOS product: %s\n", product); + kernelmode = 0; + } + + prod_len = strlen(product); + if (verbose) pr_info("BIOS info: %s %s, product: %s\n", vendor, version, product); /* search BIOS version and vendor in BIOS settings table */ for (i = 0; bios_tbl[i].version[0]; i++) { - if (!strcmp(bios_tbl[i].vendor, vendor) && + if (strlen(bios_tbl[i].product) >= prod_len && + !strncmp(bios_tbl[i].product, product, + strlen(bios_tbl[i].product)) && + !strcmp(bios_tbl[i].vendor, vendor) && !strcmp(bios_tbl[i].version, version)) { bios_cfg = &bios_tbl[i]; break; @@ -487,8 +526,8 @@ static int acerhdf_check_hardware(void) } if (!bios_cfg) { - pr_err("unknown (unsupported) BIOS version %s/%s, " - "please report, aborting!\n", vendor, version); + pr_err("unknown (unsupported) BIOS version %s/%s/%s, " + "please report, aborting!\n", vendor, product, version); return -EINVAL; } @@ -509,7 +548,7 @@ static int acerhdf_register_platform(void) { int err = 0; - err = platform_driver_register(&acerhdf_drv); + err = platform_driver_register(&acerhdf_driver); if (err) return err; @@ -525,7 +564,7 @@ static void acerhdf_unregister_platform(void) return; platform_device_del(acerhdf_dev); - platform_driver_unregister(&acerhdf_drv); + platform_driver_unregister(&acerhdf_driver); } static int acerhdf_register_thermal(void) @@ -594,9 +633,10 @@ static void __exit acerhdf_exit(void) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); -MODULE_ALIAS("dmi:*:*Acer*:*:"); -MODULE_ALIAS("dmi:*:*Gateway*:*:"); -MODULE_ALIAS("dmi:*:*Packard Bell*:*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); |