diff options
Diffstat (limited to 'drivers/platform/x86/samsung-laptop.c')
| -rw-r--r-- | drivers/platform/x86/samsung-laptop.c | 1749 |
1 files changed, 1206 insertions, 543 deletions
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index fd73ea89b857..e2a34b42ddc1 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -17,10 +17,18 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/backlight.h> +#include <linux/leds.h> #include <linux/fb.h> #include <linux/dmi.h> #include <linux/platform_device.h> #include <linux/rfkill.h> +#include <linux/acpi.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/ctype.h> +#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) +#include <acpi/video.h> +#endif /* * This driver is needed because a number of Samsung laptops do not hook @@ -41,9 +49,20 @@ #define SABI_IFACE_COMPLETE 0x04 #define SABI_IFACE_DATA 0x05 -/* Structure to get data back to the calling function */ -struct sabi_retval { - u8 retval[20]; +#define WL_STATUS_WLAN 0x0 +#define WL_STATUS_BT 0x2 + +/* Structure get/set data using sabi */ +struct sabi_data { + union { + struct { + u32 d0; + u32 d1; + u16 d2; + u8 d3; + }; + u8 data[11]; + }; }; struct sabi_header_offsets { @@ -60,8 +79,8 @@ struct sabi_commands { * Brightness is 0 - 8, as described above. * Value 0 is for the BIOS to use */ - u8 get_brightness; - u8 set_brightness; + u16 get_brightness; + u16 set_brightness; /* * first byte: @@ -72,40 +91,56 @@ struct sabi_commands { * 0x03 - 3G is on * TODO, verify 3G is correct, that doesn't seem right... */ - u8 get_wireless_button; - u8 set_wireless_button; + u16 get_wireless_button; + u16 set_wireless_button; /* 0 is off, 1 is on */ - u8 get_backlight; - u8 set_backlight; + u16 get_backlight; + u16 set_backlight; /* * 0x80 or 0x00 - no action * 0x81 - recovery key pressed */ - u8 get_recovery_mode; - u8 set_recovery_mode; + u16 get_recovery_mode; + u16 set_recovery_mode; /* * on seclinux: 0 is low, 1 is high, * on swsmi: 0 is normal, 1 is silent, 2 is turbo */ - u8 get_performance_level; - u8 set_performance_level; + u16 get_performance_level; + u16 set_performance_level; + + /* 0x80 is off, 0x81 is on */ + u16 get_battery_life_extender; + u16 set_battery_life_extender; + + /* 0x80 is off, 0x81 is on */ + u16 get_usb_charge; + u16 set_usb_charge; + + /* the first byte is for bluetooth and the third one is for wlan */ + u16 get_wireless_status; + u16 set_wireless_status; + + /* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */ + u16 kbd_backlight; /* * Tell the BIOS that Linux is running on this machine. * 81 is on, 80 is off */ - u8 set_linux; + u16 set_linux; }; struct sabi_performance_level { const char *name; - u8 value; + u16 value; }; struct sabi_config { + int sabi_version; const char *test_string; u16 main_function; const struct sabi_header_offsets header_offsets; @@ -117,6 +152,10 @@ struct sabi_config { static const struct sabi_config sabi_configs[] = { { + /* I don't know if it is really 2, but it it is + * less than 3 anyway */ + .sabi_version = 2, + .test_string = "SECLINUX", .main_function = 0x4c49, @@ -146,6 +185,17 @@ static const struct sabi_config sabi_configs[] = { .get_performance_level = 0x08, .set_performance_level = 0x09, + .get_battery_life_extender = 0xFFFF, + .set_battery_life_extender = 0xFFFF, + + .get_usb_charge = 0xFFFF, + .set_usb_charge = 0xFFFF, + + .get_wireless_status = 0xFFFF, + .set_wireless_status = 0xFFFF, + + .kbd_backlight = 0xFFFF, + .set_linux = 0x0a, }, @@ -164,6 +214,8 @@ static const struct sabi_config sabi_configs[] = { .max_brightness = 8, }, { + .sabi_version = 3, + .test_string = "SwSmi@", .main_function = 0x5843, @@ -193,6 +245,17 @@ static const struct sabi_config sabi_configs[] = { .get_performance_level = 0x31, .set_performance_level = 0x32, + .get_battery_life_extender = 0x65, + .set_battery_life_extender = 0x66, + + .get_usb_charge = 0x67, + .set_usb_charge = 0x68, + + .get_wireless_status = 0x69, + .set_wireless_status = 0x6a, + + .kbd_backlight = 0x78, + .set_linux = 0xff, }, @@ -217,16 +280,82 @@ static const struct sabi_config sabi_configs[] = { { }, }; -static const struct sabi_config *sabi_config; +/* + * samsung-laptop/ - debugfs root directory + * f0000_segment - dump f0000 segment + * command - current command + * data - current data + * d0, d1, d2, d3 - data fields + * call - call SABI using command and data + * + * This allow to call arbitrary sabi commands wihout + * modifying the driver at all. + * For example, setting the keyboard backlight brightness to 5 + * + * echo 0x78 > command + * echo 0x0582 > d0 + * echo 0 > d1 + * echo 0 > d2 + * echo 0 > d3 + * cat call + */ + +struct samsung_laptop_debug { + struct dentry *root; + struct sabi_data data; + u16 command; + + struct debugfs_blob_wrapper f0000_wrapper; + struct debugfs_blob_wrapper data_wrapper; + struct debugfs_blob_wrapper sdiag_wrapper; +}; + +struct samsung_laptop; + +struct samsung_rfkill { + struct samsung_laptop *samsung; + struct rfkill *rfkill; + enum rfkill_type type; +}; + +struct samsung_laptop { + const struct sabi_config *config; + + void __iomem *sabi; + void __iomem *sabi_iface; + void __iomem *f0000_segment; + + struct mutex sabi_mutex; + + struct platform_device *platform_device; + struct backlight_device *backlight_device; + + struct samsung_rfkill wlan; + struct samsung_rfkill bluetooth; + + struct led_classdev kbd_led; + int kbd_led_wk; + struct workqueue_struct *led_workqueue; + struct work_struct kbd_led_work; + + struct samsung_laptop_debug debug; + struct samsung_quirks *quirks; + + bool handle_backlight; + bool has_stepping_quirk; + + char sdiag[64]; +}; + +struct samsung_quirks { + bool broken_acpi_video; +}; + +static struct samsung_quirks samsung_unknown = {}; -static void __iomem *sabi; -static void __iomem *sabi_iface; -static void __iomem *f0000_segment; -static struct backlight_device *backlight_device; -static struct mutex sabi_mutex; -static struct platform_device *sdev; -static struct rfkill *rfk; -static bool has_stepping_quirk; +static struct samsung_quirks samsung_broken_acpi_video = { + .broken_acpi_video = true, +}; static bool force; module_param(force, bool, 0); @@ -237,176 +366,143 @@ static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -static int sabi_get_command(u8 command, struct sabi_retval *sretval) +static int sabi_command(struct samsung_laptop *samsung, u16 command, + struct sabi_data *in, + struct sabi_data *out) { - int retval = 0; - u16 port = readw(sabi + sabi_config->header_offsets.port); + const struct sabi_config *config = samsung->config; + int ret = 0; + u16 port = readw(samsung->sabi + config->header_offsets.port); u8 complete, iface_data; - mutex_lock(&sabi_mutex); - - /* enable memory to be able to write to it */ - outb(readb(sabi + sabi_config->header_offsets.en_mem), port); - - /* write out the command */ - writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); - writew(command, sabi_iface + SABI_IFACE_SUB); - writeb(0, sabi_iface + SABI_IFACE_COMPLETE); - outb(readb(sabi + sabi_config->header_offsets.iface_func), port); - - /* write protect memory to make it safe */ - outb(readb(sabi + sabi_config->header_offsets.re_mem), port); + mutex_lock(&samsung->sabi_mutex); - /* see if the command actually succeeded */ - complete = readb(sabi_iface + SABI_IFACE_COMPLETE); - iface_data = readb(sabi_iface + SABI_IFACE_DATA); - if (complete != 0xaa || iface_data == 0xff) { - pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", - command, complete, iface_data); - retval = -EINVAL; - goto exit; + if (debug) { + if (in) + pr_info("SABI command:0x%04x " + "data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + command, in->d0, in->d1, in->d2, in->d3); + else + pr_info("SABI command:0x%04x", command); } - /* - * Save off the data into a structure so the caller use it. - * Right now we only want the first 4 bytes, - * There are commands that need more, but not for the ones we - * currently care about. - */ - sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA); - sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1); - sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2); - sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3); - -exit: - mutex_unlock(&sabi_mutex); - return retval; - -} - -static int sabi_set_command(u8 command, u8 data) -{ - int retval = 0; - u16 port = readw(sabi + sabi_config->header_offsets.port); - u8 complete, iface_data; - - mutex_lock(&sabi_mutex); /* enable memory to be able to write to it */ - outb(readb(sabi + sabi_config->header_offsets.en_mem), port); + outb(readb(samsung->sabi + config->header_offsets.en_mem), port); /* write out the command */ - writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); - writew(command, sabi_iface + SABI_IFACE_SUB); - writeb(0, sabi_iface + SABI_IFACE_COMPLETE); - writeb(data, sabi_iface + SABI_IFACE_DATA); - outb(readb(sabi + sabi_config->header_offsets.iface_func), port); + writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN); + writew(command, samsung->sabi_iface + SABI_IFACE_SUB); + writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE); + if (in) { + writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA); + writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4); + writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8); + writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10); + } + outb(readb(samsung->sabi + config->header_offsets.iface_func), port); /* write protect memory to make it safe */ - outb(readb(sabi + sabi_config->header_offsets.re_mem), port); + outb(readb(samsung->sabi + config->header_offsets.re_mem), port); /* see if the command actually succeeded */ - complete = readb(sabi_iface + SABI_IFACE_COMPLETE); - iface_data = readb(sabi_iface + SABI_IFACE_DATA); + complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE); + iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA); + + /* iface_data = 0xFF happens when a command is not known + * so we only add a warning in debug mode since we will + * probably issue some unknown command at startup to find + * out which features are supported */ + if (complete != 0xaa || (iface_data == 0xff && debug)) + pr_warn("SABI command 0x%04x failed with" + " completion flag 0x%02x and interface data 0x%02x", + command, complete, iface_data); + if (complete != 0xaa || iface_data == 0xff) { - pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", - command, complete, iface_data); - retval = -EINVAL; + ret = -EINVAL; + goto exit; } - mutex_unlock(&sabi_mutex); - return retval; -} - -static void test_backlight(void) -{ - struct sabi_retval sretval; - - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); - - sabi_set_command(sabi_config->commands.set_backlight, 0); - printk(KERN_DEBUG "backlight should be off\n"); - - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); - - msleep(1000); + if (out) { + out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA); + out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4); + out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2); + out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1); + } - sabi_set_command(sabi_config->commands.set_backlight, 1); - printk(KERN_DEBUG "backlight should be on\n"); + if (debug && out) { + pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + out->d0, out->d1, out->d2, out->d3); + } - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); +exit: + mutex_unlock(&samsung->sabi_mutex); + return ret; } -static void test_wireless(void) +/* simple wrappers usable with most commands */ +static int sabi_set_commandb(struct samsung_laptop *samsung, + u16 command, u8 data) { - struct sabi_retval sretval; - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); - - sabi_set_command(sabi_config->commands.set_wireless_button, 0); - printk(KERN_DEBUG "wireless led should be off\n"); - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); + struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } }; - msleep(1000); - - sabi_set_command(sabi_config->commands.set_wireless_button, 1); - printk(KERN_DEBUG "wireless led should be on\n"); - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); + in.data[0] = data; + return sabi_command(samsung, command, &in, NULL); } -static u8 read_brightness(void) +static int read_brightness(struct samsung_laptop *samsung) { - struct sabi_retval sretval; + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data sretval; int user_brightness = 0; int retval; - retval = sabi_get_command(sabi_config->commands.get_brightness, - &sretval); - if (!retval) { - user_brightness = sretval.retval[0]; - if (user_brightness > sabi_config->min_brightness) - user_brightness -= sabi_config->min_brightness; - else - user_brightness = 0; - } + retval = sabi_command(samsung, commands->get_brightness, + NULL, &sretval); + if (retval) + return retval; + + user_brightness = sretval.data[0]; + if (user_brightness > config->min_brightness) + user_brightness -= config->min_brightness; + else + user_brightness = 0; + return user_brightness; } -static void set_brightness(u8 user_brightness) +static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness) { - u8 user_level = user_brightness + sabi_config->min_brightness; + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + u8 user_level = user_brightness + config->min_brightness; - if (has_stepping_quirk && user_level != 0) { + if (samsung->has_stepping_quirk && user_level != 0) { /* * short circuit if the specified level is what's already set * to prevent the screen from flickering needlessly */ - if (user_brightness == read_brightness()) + if (user_brightness == read_brightness(samsung)) return; - sabi_set_command(sabi_config->commands.set_brightness, 0); + sabi_set_commandb(samsung, commands->set_brightness, 0); } - sabi_set_command(sabi_config->commands.set_brightness, user_level); + sabi_set_commandb(samsung, commands->set_brightness, user_level); } static int get_brightness(struct backlight_device *bd) { - return (int)read_brightness(); + struct samsung_laptop *samsung = bl_get_data(bd); + + return read_brightness(samsung); } -static void check_for_stepping_quirk(void) +static void check_for_stepping_quirk(struct samsung_laptop *samsung) { - u8 initial_level; - u8 check_level; - u8 orig_level = read_brightness(); + int initial_level; + int check_level; + int orig_level = read_brightness(samsung); /* * Some laptops exhibit the strange behaviour of stepping toward @@ -416,34 +512,38 @@ static void check_for_stepping_quirk(void) */ if (orig_level == 0) - set_brightness(1); + set_brightness(samsung, 1); - initial_level = read_brightness(); + initial_level = read_brightness(samsung); if (initial_level <= 2) check_level = initial_level + 2; else check_level = initial_level - 2; - has_stepping_quirk = false; - set_brightness(check_level); + samsung->has_stepping_quirk = false; + set_brightness(samsung, check_level); - if (read_brightness() != check_level) { - has_stepping_quirk = true; + if (read_brightness(samsung) != check_level) { + samsung->has_stepping_quirk = true; pr_info("enabled workaround for brightness stepping quirk\n"); } - set_brightness(orig_level); + set_brightness(samsung, orig_level); } static int update_status(struct backlight_device *bd) { - set_brightness(bd->props.brightness); + struct samsung_laptop *samsung = bl_get_data(bd); + const struct sabi_commands *commands = &samsung->config->commands; + + set_brightness(samsung, bd->props.brightness); if (bd->props.power == FB_BLANK_UNBLANK) - sabi_set_command(sabi_config->commands.set_backlight, 1); + sabi_set_commandb(samsung, commands->set_backlight, 1); else - sabi_set_command(sabi_config->commands.set_backlight, 0); + sabi_set_commandb(samsung, commands->set_backlight, 0); + return 0; } @@ -452,66 +552,101 @@ static const struct backlight_ops backlight_ops = { .update_status = update_status, }; -static int rfkill_set(void *data, bool blocked) +static int seclinux_rfkill_set(void *data, bool blocked) { - /* Do something with blocked...*/ - /* - * blocked == false is on - * blocked == true is off - */ - if (blocked) - sabi_set_command(sabi_config->commands.set_wireless_button, 0); - else - sabi_set_command(sabi_config->commands.set_wireless_button, 1); + struct samsung_rfkill *srfkill = data; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; - return 0; + return sabi_set_commandb(samsung, commands->set_wireless_button, + !blocked); } -static struct rfkill_ops rfkill_ops = { - .set_block = rfkill_set, +static struct rfkill_ops seclinux_rfkill_ops = { + .set_block = seclinux_rfkill_set, }; -static int init_wireless(struct platform_device *sdev) +static int swsmi_wireless_status(struct samsung_laptop *samsung, + struct sabi_data *data) { - int retval; + const struct sabi_commands *commands = &samsung->config->commands; - rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN, - &rfkill_ops, NULL); - if (!rfk) - return -ENOMEM; - - retval = rfkill_register(rfk); - if (retval) { - rfkill_destroy(rfk); - return -ENODEV; - } + return sabi_command(samsung, commands->get_wireless_status, + NULL, data); +} - return 0; +static int swsmi_rfkill_set(void *priv, bool blocked) +{ + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int ret, i; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ret; + + /* Don't set the state for non-present devices */ + for (i = 0; i < 4; i++) + if (data.data[i] == 0x02) + data.data[1] = 0; + + if (srfkill->type == RFKILL_TYPE_WLAN) + data.data[WL_STATUS_WLAN] = !blocked; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + data.data[WL_STATUS_BT] = !blocked; + + return sabi_command(samsung, commands->set_wireless_status, + &data, &data); } -static void destroy_wireless(void) +static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv) { - rfkill_unregister(rfk); - rfkill_destroy(rfk); + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ; + + if (srfkill->type == RFKILL_TYPE_WLAN) + ret = data.data[WL_STATUS_WLAN]; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + ret = data.data[WL_STATUS_BT]; + else + return ; + + rfkill_set_sw_state(rfkill, !ret); } +static struct rfkill_ops swsmi_rfkill_ops = { + .set_block = swsmi_rfkill_set, + .query = swsmi_rfkill_query, +}; + static ssize_t get_performance_level(struct device *dev, struct device_attribute *attr, char *buf) { - struct sabi_retval sretval; + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + struct sabi_data sretval; int retval; int i; /* Read the state */ - retval = sabi_get_command(sabi_config->commands.get_performance_level, - &sretval); + retval = sabi_command(samsung, commands->get_performance_level, + NULL, &sretval); if (retval) return retval; /* The logic is backwards, yeah, lots of fun... */ - for (i = 0; sabi_config->performance_levels[i].name; ++i) { - if (sretval.retval[0] == sabi_config->performance_levels[i].value) - return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name); + for (i = 0; config->performance_levels[i].name; ++i) { + if (sretval.data[0] == config->performance_levels[i].value) + return sprintf(buf, "%s\n", config->performance_levels[i].name); } return sprintf(buf, "%s\n", "unknown"); } @@ -520,269 +655,178 @@ static ssize_t set_performance_level(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - if (count >= 1) { - int i; - for (i = 0; sabi_config->performance_levels[i].name; ++i) { - const struct sabi_performance_level *level = - &sabi_config->performance_levels[i]; - if (!strncasecmp(level->name, buf, strlen(level->name))) { - sabi_set_command(sabi_config->commands.set_performance_level, - level->value); - break; - } + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + int i; + + if (count < 1) + return count; + + for (i = 0; config->performance_levels[i].name; ++i) { + const struct sabi_performance_level *level = + &config->performance_levels[i]; + if (!strncasecmp(level->name, buf, strlen(level->name))) { + sabi_set_commandb(samsung, + commands->set_performance_level, + level->value); + break; } - if (!sabi_config->performance_levels[i].name) - return -EINVAL; } + + if (!config->performance_levels[i].name) + return -EINVAL; + return count; } + static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO, get_performance_level, set_performance_level); +static int read_battery_life_extender(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_battery_life_extender == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_battery_life_extender, + &data, &data); -static int __init dmi_check_cb(const struct dmi_system_id *id) + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_battery_life_extender(struct samsung_laptop *samsung, + int enabled) { - pr_info("found laptop model '%s'\n", - id->ident); - return 1; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_battery_life_extender, + &data, NULL); } -static struct dmi_system_id __initdata samsung_dmi_table[] = { - { - .ident = "N128", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N128"), - DMI_MATCH(DMI_BOARD_NAME, "N128"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N130", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N130"), - DMI_MATCH(DMI_BOARD_NAME, "N130"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N510", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N510"), - DMI_MATCH(DMI_BOARD_NAME, "N510"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X125", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X125"), - DMI_MATCH(DMI_BOARD_NAME, "X125"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X120/X170", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"), - DMI_MATCH(DMI_BOARD_NAME, "X120/X170"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NC10", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), - DMI_MATCH(DMI_BOARD_NAME, "NC10"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NP-Q45", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), - DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X360"), - DMI_MATCH(DMI_BOARD_NAME, "X360"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R410 Plus", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R410P"), - DMI_MATCH(DMI_BOARD_NAME, "R460"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R518", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R518"), - DMI_MATCH(DMI_BOARD_NAME, "R518"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R519/R719", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"), - DMI_MATCH(DMI_BOARD_NAME, "R519/R719"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150/N210/N220", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), - DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N220", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N220"), - DMI_MATCH(DMI_BOARD_NAME, "N220"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150/N210/N220/N230", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"), - DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150P/N210P/N220P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"), - DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R700", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "SR700"), - DMI_MATCH(DMI_BOARD_NAME, "SR700"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R530/R730", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"), - DMI_MATCH(DMI_BOARD_NAME, "R530/R730"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NF110/NF210/NF310", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), - DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N145P/N250P/N260P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), - DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R70/R71", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"), - DMI_MATCH(DMI_BOARD_NAME, "R70/R71"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "P460", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "P460"), - DMI_MATCH(DMI_BOARD_NAME, "P460"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R528/R728", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"), - DMI_MATCH(DMI_BOARD_NAME, "R528/R728"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NC210/NC110", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), - DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X520", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X520"), - DMI_MATCH(DMI_BOARD_NAME, "X520"), - }, - .callback = dmi_check_cb, - }, - { }, +static ssize_t get_battery_life_extender(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_battery_life_extender(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_battery_life_extender(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || sscanf(buf, "%i", &value) != 1) + return -EINVAL; + + ret = write_battery_life_extender(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(battery_life_extender, S_IWUSR | S_IRUGO, + get_battery_life_extender, set_battery_life_extender); + +static int read_usb_charge(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_usb_charge == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_usb_charge, + &data, &data); + + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_usb_charge(struct samsung_laptop *samsung, + int enabled) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_usb_charge, + &data, NULL); +} + +static ssize_t get_usb_charge(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_usb_charge(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_usb_charge(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || sscanf(buf, "%i", &value) != 1) + return -EINVAL; + + ret = write_usb_charge(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(usb_charge, S_IWUSR | S_IRUGO, + get_usb_charge, set_usb_charge); + +static struct attribute *platform_attributes[] = { + &dev_attr_performance_level.attr, + &dev_attr_battery_life_extender.attr, + &dev_attr_usb_charge.attr, + NULL }; -MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); static int find_signature(void __iomem *memcheck, const char *testStr) { @@ -803,153 +847,772 @@ static int find_signature(void __iomem *memcheck, const char *testStr) return loca; } -static int __init samsung_init(void) +static void samsung_rfkill_exit(struct samsung_laptop *samsung) { - struct backlight_properties props; - struct sabi_retval sretval; - unsigned int ifaceP; - int i; - int loca; + if (samsung->wlan.rfkill) { + rfkill_unregister(samsung->wlan.rfkill); + rfkill_destroy(samsung->wlan.rfkill); + samsung->wlan.rfkill = NULL; + } + if (samsung->bluetooth.rfkill) { + rfkill_unregister(samsung->bluetooth.rfkill); + rfkill_destroy(samsung->bluetooth.rfkill); + samsung->bluetooth.rfkill = NULL; + } +} + +static int samsung_new_rfkill(struct samsung_laptop *samsung, + struct samsung_rfkill *arfkill, + const char *name, enum rfkill_type type, + const struct rfkill_ops *ops, + int blocked) +{ + struct rfkill **rfkill = &arfkill->rfkill; + int ret; + + arfkill->type = type; + arfkill->samsung = samsung; + + *rfkill = rfkill_alloc(name, &samsung->platform_device->dev, + type, ops, arfkill); + + if (!*rfkill) + return -EINVAL; + + if (blocked != -1) + rfkill_init_sw_state(*rfkill, blocked); + + ret = rfkill_register(*rfkill); + if (ret) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return ret; + } + return 0; +} + +static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung) +{ + return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan", + RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1); +} + +static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung) +{ + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) { + /* Some swsmi laptops use the old seclinux way to control + * wireless devices */ + if (ret == -EINVAL) + ret = samsung_rfkill_init_seclinux(samsung); + return ret; + } + + /* 0x02 seems to mean that the device is no present/available */ + + if (data.data[WL_STATUS_WLAN] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->wlan, + "samsung-wlan", + RFKILL_TYPE_WLAN, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_WLAN]); + if (ret) + goto exit; + + if (data.data[WL_STATUS_BT] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->bluetooth, + "samsung-bluetooth", + RFKILL_TYPE_BLUETOOTH, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_BT]); + if (ret) + goto exit; + +exit: + if (ret) + samsung_rfkill_exit(samsung); + + return ret; +} + +static int __init samsung_rfkill_init(struct samsung_laptop *samsung) +{ + if (samsung->config->sabi_version == 2) + return samsung_rfkill_init_seclinux(samsung); + if (samsung->config->sabi_version == 3) + return samsung_rfkill_init_swsmi(samsung); + return 0; +} + +static int kbd_backlight_enable(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; int retval; - mutex_init(&sabi_mutex); + if (commands->kbd_backlight == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.d0 = 0xaabb; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); - if (!force && !dmi_check_system(samsung_dmi_table)) + if (retval) + return retval; + + if (data.d0 != 0xccdd) return -ENODEV; + return 0; +} - f0000_segment = ioremap_nocache(0xf0000, 0xffff); - if (!f0000_segment) { - pr_err("Can't map the segment at 0xf0000\n"); - return -EINVAL; +static int kbd_backlight_read(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x81; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); + + if (retval) + return retval; + + return data.data[0]; +} + +static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.d0 = 0x82 | ((brightness & 0xFF) << 8); + return sabi_command(samsung, commands->kbd_backlight, + &data, NULL); +} + +static void kbd_led_update(struct work_struct *work) +{ + struct samsung_laptop *samsung; + + samsung = container_of(work, struct samsung_laptop, kbd_led_work); + kbd_backlight_write(samsung, samsung->kbd_led_wk); +} + +static void kbd_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + + if (value > samsung->kbd_led.max_brightness) + value = samsung->kbd_led.max_brightness; + else if (value < 0) + value = 0; + + samsung->kbd_led_wk = value; + queue_work(samsung->led_workqueue, &samsung->kbd_led_work); +} + +static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + return kbd_backlight_read(samsung); +} + +static void samsung_leds_exit(struct samsung_laptop *samsung) +{ + if (!IS_ERR_OR_NULL(samsung->kbd_led.dev)) + led_classdev_unregister(&samsung->kbd_led); + if (samsung->led_workqueue) + destroy_workqueue(samsung->led_workqueue); +} + +static int __init samsung_leds_init(struct samsung_laptop *samsung) +{ + int ret = 0; + + samsung->led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!samsung->led_workqueue) + return -ENOMEM; + + if (kbd_backlight_enable(samsung) >= 0) { + INIT_WORK(&samsung->kbd_led_work, kbd_led_update); + + samsung->kbd_led.name = "samsung::kbd_backlight"; + samsung->kbd_led.brightness_set = kbd_led_set; + samsung->kbd_led.brightness_get = kbd_led_get; + samsung->kbd_led.max_brightness = 8; + + ret = led_classdev_register(&samsung->platform_device->dev, + &samsung->kbd_led); + } + + if (ret) + samsung_leds_exit(samsung); + + return ret; +} + +static void samsung_backlight_exit(struct samsung_laptop *samsung) +{ + if (samsung->backlight_device) { + backlight_device_unregister(samsung->backlight_device); + samsung->backlight_device = NULL; + } +} + +static int __init samsung_backlight_init(struct samsung_laptop *samsung) +{ + struct backlight_device *bd; + struct backlight_properties props; + + if (!samsung->handle_backlight) + return 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = samsung->config->max_brightness - + samsung->config->min_brightness; + + bd = backlight_device_register("samsung", + &samsung->platform_device->dev, + samsung, &backlight_ops, + &props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + samsung->backlight_device = bd; + samsung->backlight_device->props.brightness = read_brightness(samsung); + samsung->backlight_device->props.power = FB_BLANK_UNBLANK; + backlight_update_status(samsung->backlight_device); + + return 0; +} + +static umode_t samsung_sysfs_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct platform_device *pdev = to_platform_device(dev); + struct samsung_laptop *samsung = platform_get_drvdata(pdev); + bool ok = true; + + if (attr == &dev_attr_performance_level.attr) + ok = !!samsung->config->performance_levels[0].name; + if (attr == &dev_attr_battery_life_extender.attr) + ok = !!(read_battery_life_extender(samsung) >= 0); + if (attr == &dev_attr_usb_charge.attr) + ok = !!(read_usb_charge(samsung) >= 0); + + return ok ? attr->mode : 0; +} + +static struct attribute_group platform_attribute_group = { + .is_visible = samsung_sysfs_is_visible, + .attrs = platform_attributes +}; + +static void samsung_sysfs_exit(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); +} + +static int __init samsung_sysfs_init(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); + +} + +static int show_call(struct seq_file *m, void *data) +{ + struct samsung_laptop *samsung = m->private; + struct sabi_data *sdata = &samsung->debug.data; + int ret; + + seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + samsung->debug.command, + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + + ret = sabi_command(samsung, samsung->debug.command, sdata, sdata); + + if (ret) { + seq_printf(m, "SABI command 0x%04x failed\n", + samsung->debug.command); + return ret; + } + + seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + return 0; +} + +static int samsung_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_call, inode->i_private); +} + +static const struct file_operations samsung_laptop_call_io_ops = { + .owner = THIS_MODULE, + .open = samsung_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void samsung_debugfs_exit(struct samsung_laptop *samsung) +{ + debugfs_remove_recursive(samsung->debug.root); +} + +static int samsung_debugfs_init(struct samsung_laptop *samsung) +{ + struct dentry *dent; + + samsung->debug.root = debugfs_create_dir("samsung-laptop", NULL); + if (!samsung->debug.root) { + pr_err("failed to create debugfs directory"); + goto error_debugfs; + } + + samsung->debug.f0000_wrapper.data = samsung->f0000_segment; + samsung->debug.f0000_wrapper.size = 0xffff; + + samsung->debug.data_wrapper.data = &samsung->debug.data; + samsung->debug.data_wrapper.size = sizeof(samsung->debug.data); + + samsung->debug.sdiag_wrapper.data = samsung->sdiag; + samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag); + + dent = debugfs_create_u16("command", S_IRUGO | S_IWUSR, + samsung->debug.root, &samsung->debug.command); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u32("d0", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d0); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u32("d1", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d1); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u16("d2", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d2); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u8("d3", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d3); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("data", S_IRUGO | S_IWUSR, + samsung->debug.root, + &samsung->debug.data_wrapper); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("f0000_segment", S_IRUSR | S_IWUSR, + samsung->debug.root, + &samsung->debug.f0000_wrapper); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_file("call", S_IFREG | S_IRUGO, + samsung->debug.root, samsung, + &samsung_laptop_call_io_ops); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("sdiag", S_IRUGO | S_IWUSR, + samsung->debug.root, + &samsung->debug.sdiag_wrapper); + if (!dent) + goto error_debugfs; + + return 0; + +error_debugfs: + samsung_debugfs_exit(samsung); + return -ENOMEM; +} + +static void samsung_sabi_exit(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = samsung->config; + + /* Turn off "Linux" mode in the BIOS */ + if (config && config->commands.set_linux != 0xff) + sabi_set_commandb(samsung, config->commands.set_linux, 0x80); + + if (samsung->sabi_iface) { + iounmap(samsung->sabi_iface); + samsung->sabi_iface = NULL; + } + if (samsung->f0000_segment) { + iounmap(samsung->f0000_segment); + samsung->f0000_segment = NULL; + } + + samsung->config = NULL; +} + +static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca, + unsigned int ifaceP) +{ + const struct sabi_config *config = samsung->config; + + printk(KERN_DEBUG "This computer supports SABI==%x\n", + loca + 0xf0000 - 6); + + printk(KERN_DEBUG "SABI header:\n"); + printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.port)); + printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.iface_func)); + printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.en_mem)); + printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.re_mem)); + printk(KERN_DEBUG " SABI data offset = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_offset)); + printk(KERN_DEBUG " SABI data segment = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_segment)); + + printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP); +} + +static void __init samsung_sabi_diag(struct samsung_laptop *samsung) +{ + int loca = find_signature(samsung->f0000_segment, "SDiaG@"); + int i; + + if (loca == 0xffff) + return ; + + /* Example: + * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A + * + * Product name: 90X3A + * BIOS Version: 07HL + */ + loca += 1; + for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) { + char temp = readb(samsung->f0000_segment + loca); + + if (isalnum(temp) || temp == '/' || temp == '-') + samsung->sdiag[i++] = temp; + else + break ; } + if (debug && samsung->sdiag[0]) + pr_info("sdiag: %s", samsung->sdiag); +} + +static int __init samsung_sabi_init(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = NULL; + const struct sabi_commands *commands; + unsigned int ifaceP; + int ret = 0; + int i; + int loca; + + samsung->f0000_segment = ioremap_nocache(0xf0000, 0xffff); + if (!samsung->f0000_segment) { + if (debug || force) + pr_err("Can't map the segment at 0xf0000\n"); + ret = -EINVAL; + goto exit; + } + + samsung_sabi_diag(samsung); + /* Try to find one of the signatures in memory to find the header */ for (i = 0; sabi_configs[i].test_string != 0; ++i) { - sabi_config = &sabi_configs[i]; - loca = find_signature(f0000_segment, sabi_config->test_string); + samsung->config = &sabi_configs[i]; + loca = find_signature(samsung->f0000_segment, + samsung->config->test_string); if (loca != 0xffff) break; } if (loca == 0xffff) { - pr_err("This computer does not support SABI\n"); - goto error_no_signature; + if (debug || force) + pr_err("This computer does not support SABI\n"); + ret = -ENODEV; + goto exit; } + config = samsung->config; + commands = &config->commands; + /* point to the SMI port Number */ loca += 1; - sabi = (f0000_segment + loca); - - if (debug) { - printk(KERN_DEBUG "This computer supports SABI==%x\n", - loca + 0xf0000 - 6); - printk(KERN_DEBUG "SABI header:\n"); - printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.port)); - printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.iface_func)); - printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.en_mem)); - printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.re_mem)); - printk(KERN_DEBUG " SABI data offset = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.data_offset)); - printk(KERN_DEBUG " SABI data segment = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.data_segment)); - } + samsung->sabi = (samsung->f0000_segment + loca); /* Get a pointer to the SABI Interface */ - ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4; - ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff; - sabi_iface = ioremap_nocache(ifaceP, 16); - if (!sabi_iface) { - pr_err("Can't remap %x\n", ifaceP); - goto error_no_signature; - } - if (debug) { - printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP); - printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface); + ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4; + ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff; - test_backlight(); - test_wireless(); + if (debug) + samsung_sabi_infos(samsung, loca, ifaceP); - retval = sabi_get_command(sabi_config->commands.get_brightness, - &sretval); - printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]); + samsung->sabi_iface = ioremap_nocache(ifaceP, 16); + if (!samsung->sabi_iface) { + pr_err("Can't remap %x\n", ifaceP); + ret = -EINVAL; + goto exit; } /* Turn on "Linux" mode in the BIOS */ - if (sabi_config->commands.set_linux != 0xff) { - retval = sabi_set_command(sabi_config->commands.set_linux, - 0x81); + if (commands->set_linux != 0xff) { + int retval = sabi_set_commandb(samsung, + commands->set_linux, 0x81); if (retval) { pr_warn("Linux mode was not set!\n"); - goto error_no_platform; + ret = -ENODEV; + goto exit; } } /* Check for stepping quirk */ - check_for_stepping_quirk(); + if (samsung->handle_backlight) + check_for_stepping_quirk(samsung); - /* knock up a platform device to hang stuff off of */ - sdev = platform_device_register_simple("samsung", -1, NULL, 0); - if (IS_ERR(sdev)) - goto error_no_platform; + pr_info("detected SABI interface: %s\n", + samsung->config->test_string); - /* create a backlight device to talk to this one */ - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_PLATFORM; - props.max_brightness = sabi_config->max_brightness - - sabi_config->min_brightness; - backlight_device = backlight_device_register("samsung", &sdev->dev, - NULL, &backlight_ops, - &props); - if (IS_ERR(backlight_device)) - goto error_no_backlight; - - backlight_device->props.brightness = read_brightness(); - backlight_device->props.power = FB_BLANK_UNBLANK; - backlight_update_status(backlight_device); - - retval = init_wireless(sdev); - if (retval) - goto error_no_rfk; +exit: + if (ret) + samsung_sabi_exit(samsung); - retval = device_create_file(&sdev->dev, &dev_attr_performance_level); - if (retval) - goto error_file_create; + return ret; +} + +static void samsung_platform_exit(struct samsung_laptop *samsung) +{ + if (samsung->platform_device) { + platform_device_unregister(samsung->platform_device); + samsung->platform_device = NULL; + } +} + +static int __init samsung_platform_init(struct samsung_laptop *samsung) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("samsung", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + samsung->platform_device = pdev; + platform_set_drvdata(samsung->platform_device, samsung); return 0; +} + +static struct samsung_quirks *quirks; + +static int __init samsung_dmi_matched(const struct dmi_system_id *d) +{ + quirks = d->driver_data; + return 0; +} + +static struct dmi_system_id __initdata samsung_dmi_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ + }, + }, + /* Specific DMI ids for laptop with quirks */ + { + .callback = samsung_dmi_matched, + .ident = "N150P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150P"), + DMI_MATCH(DMI_BOARD_NAME, "N150P"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "N145P/N250P/N260P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), + DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "N150/N210/N220", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), + DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "NF110/NF210/NF310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), + DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { }, +}; +MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); -error_file_create: - destroy_wireless(); +static struct platform_device *samsung_platform_device; -error_no_rfk: - backlight_device_unregister(backlight_device); +static int __init samsung_init(void) +{ + struct samsung_laptop *samsung; + int ret; -error_no_backlight: - platform_device_unregister(sdev); + quirks = &samsung_unknown; + if (!force && !dmi_check_system(samsung_dmi_table)) + return -ENODEV; + + samsung = kzalloc(sizeof(*samsung), GFP_KERNEL); + if (!samsung) + return -ENOMEM; -error_no_platform: - iounmap(sabi_iface); + mutex_init(&samsung->sabi_mutex); + samsung->handle_backlight = true; + samsung->quirks = quirks; -error_no_signature: - iounmap(f0000_segment); - return -EINVAL; + +#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) + /* Don't handle backlight here if the acpi video already handle it */ + if (acpi_video_backlight_support()) { + if (samsung->quirks->broken_acpi_video) { + pr_info("Disabling ACPI video driver\n"); + acpi_video_unregister(); + } else { + samsung->handle_backlight = false; + } + } +#endif + + ret = samsung_platform_init(samsung); + if (ret) + goto error_platform; + + ret = samsung_sabi_init(samsung); + if (ret) + goto error_sabi; + +#ifdef CONFIG_ACPI + /* Only log that if we are really on a sabi platform */ + if (acpi_video_backlight_support() && + !samsung->quirks->broken_acpi_video) + pr_info("Backlight controlled by ACPI video driver\n"); +#endif + + ret = samsung_sysfs_init(samsung); + if (ret) + goto error_sysfs; + + ret = samsung_backlight_init(samsung); + if (ret) + goto error_backlight; + + ret = samsung_rfkill_init(samsung); + if (ret) + goto error_rfkill; + + ret = samsung_leds_init(samsung); + if (ret) + goto error_leds; + + ret = samsung_debugfs_init(samsung); + if (ret) + goto error_debugfs; + + samsung_platform_device = samsung->platform_device; + return ret; + +error_debugfs: + samsung_leds_exit(samsung); +error_leds: + samsung_rfkill_exit(samsung); +error_rfkill: + samsung_backlight_exit(samsung); +error_backlight: + samsung_sysfs_exit(samsung); +error_sysfs: + samsung_sabi_exit(samsung); +error_sabi: + samsung_platform_exit(samsung); +error_platform: + kfree(samsung); + return ret; } static void __exit samsung_exit(void) { - /* Turn off "Linux" mode in the BIOS */ - if (sabi_config->commands.set_linux != 0xff) - sabi_set_command(sabi_config->commands.set_linux, 0x80); - - device_remove_file(&sdev->dev, &dev_attr_performance_level); - backlight_device_unregister(backlight_device); - destroy_wireless(); - iounmap(sabi_iface); - iounmap(f0000_segment); - platform_device_unregister(sdev); + struct samsung_laptop *samsung; + + samsung = platform_get_drvdata(samsung_platform_device); + + samsung_debugfs_exit(samsung); + samsung_leds_exit(samsung); + samsung_rfkill_exit(samsung); + samsung_backlight_exit(samsung); + samsung_sysfs_exit(samsung); + samsung_sabi_exit(samsung); + samsung_platform_exit(samsung); + + kfree(samsung); + samsung_platform_device = NULL; } module_init(samsung_init); |