diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 67d47b59a66d..a5d97eaee99e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -91,6 +91,7 @@ config REGULATOR_AAT2870 config REGULATOR_ARIZONA tristate "Wolfson Arizona class devices" depends on MFD_ARIZONA + depends on SND_SOC help Support for the regulators found on Wolfson Arizona class devices. @@ -109,6 +110,16 @@ config REGULATOR_DA9052 This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. +config REGULATOR_DA9055 + tristate "Dialog Semiconductor DA9055 regulators" + depends on MFD_DA9055 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-regulator. + config REGULATOR_FAN53555 tristate "Fairchild FAN53555 Regulator" depends on I2C @@ -204,6 +215,16 @@ config REGULATOR_MAX8952 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. +config REGULATOR_MAX8973 + tristate "Maxim MAX8973 voltage regulator " + depends on I2C + select REGMAP_I2C + help + The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down + switching regulator delievers up to 9A of output current. Each + phase operates at a 2MHz fixed frequency with a 120 deg shift + from the adjacent phase, allowing the use of small magnetic component. + config REGULATOR_MAX8997 tristate "Maxim 8997/8966 regulator" depends on MFD_MAX8997 @@ -257,6 +278,15 @@ config REGULATOR_LP872X help This driver supports LP8720/LP8725 PMIC +config REGULATOR_LP8755 + tristate "TI LP8755 High Performance PMU driver" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8755 High Performance PMU driver. This + chip contains six step-down DC/DC converters which can support + 9 mode multiphase configuration. + config REGULATOR_LP8788 bool "TI LP8788 Power Regulators" depends on MFD_LP8788 @@ -335,6 +365,17 @@ config REGULATOR_PALMAS on the muxing. This is handled automatically in the driver by reading the mux info from OTP. +config REGULATOR_TPS51632 + tristate "TI TPS51632 Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS51632 voltage regulator chip. + The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller + with Serial VID control and DVFS. + The voltage output can be configure through I2C interface or PWM + interface. + config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X @@ -415,6 +456,15 @@ config REGULATOR_TPS65912 help This driver supports TPS65912 voltage regulator chip. +config REGULATOR_TPS80031 + tristate "TI TPS80031/TPS80032 power regualtor driver" + depends on MFD_TPS80031 + help + TPS80031/ TPS80032 Fully Integrated Power Management with Power + Path and Battery Charger. It has 5 configurable step-down + converters, 11 general purpose LDOs, VBUS generator and digital + output to control regulators. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE @@ -422,6 +472,13 @@ config REGULATOR_TWL4030 This driver supports the voltage regulators provided by this family of companion chips. +config REGULATOR_VEXPRESS + tristate "Versatile Express regulators" + depends on VEXPRESS_CONFIG + help + This driver provides support for voltage regulators available + on the ARM Ltd's Versatile Express platform. + config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X @@ -450,5 +507,12 @@ config REGULATOR_WM8994 This driver provides support for the voltage regulators on the WM8994 CODEC. +config REGULATOR_AS3711 + tristate "AS3711 PMIC" + depends on MFD_AS3711 + help + This driver provides support for the voltage regulators on the + AS3711 PMIC + endif |