diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index eaa6df1c9f80..d84f3d054c59 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -297,6 +297,14 @@ config REGULATOR_BD96801 This driver can also be built as a module. If so, the module will be called bd96801-regulator. +config REGULATOR_BQ257XX + tristate "TI BQ257XX regulator family" + depends on MFD_BQ257XX + depends on GPIOLIB || COMPILE_TEST + help + Say Y to enable support for the boost regulator function of + the BQ257XX family of charger circuits. + config REGULATOR_CPCAP tristate "Motorola CPCAP regulator" depends on MFD_CPCAP @@ -777,6 +785,15 @@ config REGULATOR_MAX77826 It includes support for control of output voltage. This regulator is found on the Samsung Galaxy S5 (klte) smartphone. +config REGULATOR_MAX77838 + tristate "Maxim 77838 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77838 regulator via I2C bus. + The regulator include 4 LDOs and a BUCK regulator. It's + present on the Samsung Galaxy S7 lineup of smartphones. + config REGULATOR_MC13XXX_CORE tristate @@ -1006,6 +1023,26 @@ config REGULATOR_PCAP This driver provides support for the voltage regulators of the PCAP2 PMIC. +config REGULATOR_PF0900 + tristate "NXP PF0900/PF0901/PF09XX regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PF0900/PF0901/PF09XX PMIC + regulator driver. + +config REGULATOR_PF530X + tristate "NXP PF5300/PF5301/PF5302 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the NXP + PF5300/PF5301/PF5302 PMIC. + + Say M here if you want to support for the regulators found + on the NXP PF5300/PF5301/PF5302 PMIC. The module will be named + "pf530x-regulator". + config REGULATOR_PF8X00 tristate "NXP PF8100/PF8121A/PF8200 regulator driver" depends on I2C && OF @@ -1240,6 +1277,18 @@ config REGULATOR_RT5120 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage by external hardware circuit. +config REGULATOR_RT5133 + tristate "Richtek RT5133 PMIC Regulators" + depends on I2C && GPIOLIB && OF + select REGMAP + select CRC8 + select OF_GPIO + help + This driver adds support for RT5133 PMIC regulators. + RT5133 is an integrated chip. It includes 8 LDOs and 3 GPOs that + can be used to drive output high/low purpose. The dependency of the + GPO block is internally LDO1 Voltage. + config REGULATOR_RT5190A tristate "Richtek RT5190A PMIC" depends on I2C @@ -1344,6 +1393,14 @@ config REGULATOR_RTQ2208 and two ldos. It features wide output voltage range from 0.4V to 2.05V and the capability to configure the corresponding power stages. +config REGULATOR_S2DOS05 + tristate "Samsung S2DOS05 voltage regulator" + depends on MFD_SEC_CORE || COMPILE_TEST + help + This driver provides support for the voltage regulators of the S2DOS05. + The S2DOS05 is a companion power management IC for the smart phones. + The S2DOS05 has 4 LDOs and 1 BUCK outputs. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST @@ -1395,6 +1452,19 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. +config REGULATOR_SPACEMIT_P1 + tristate "SpacemiT P1 regulators" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT + help + Enable support for regulators implemented by the SpacemiT P1 + power controller. The P1 implements 6 high-efficiency buck + converters and 12 programmable LDO regulators. To compile this + driver as a module, choose M here. The module will be called + "spacemit-pmic". + config REGULATOR_STM32_BOOSTER tristate "STMicroelectronics STM32 BOOSTER" depends on ARCH_STM32 || COMPILE_TEST |