diff options
Diffstat (limited to 'drivers/regulator/max1586.c')
| -rw-r--r-- | drivers/regulator/max1586.c | 35 |
1 files changed, 12 insertions, 23 deletions
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index b9444ee08da9..f215195de917 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -48,6 +48,14 @@ struct max1586_data { }; /* + * V6 voltage + * On I2C bus, sending a "x" byte to the max1586 means : + * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3) + * As regulator framework doesn't accept voltages to be 0V, we use 1uV. + */ +static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 }; + +/* * V3 voltage * On I2C bus, sending a "x" byte to the max1586 means : * set V3 to 0.700V + (x & 0x1f) * 0.025V @@ -97,19 +105,6 @@ static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector) return max1586_v3_calc_voltage(max1586, selector); } -/* - * V6 voltage - * On I2C bus, sending a "x" byte to the max1586 means : - * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3) - * As regulator framework doesn't accept voltages to be 0V, we use 1uV. - */ -static int max1586_v6_calc_voltage(unsigned selector) -{ - static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 }; - - return voltages_uv[selector]; -} - static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned int *selector) { @@ -130,23 +125,16 @@ static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV, else if (min_uV >= 3000000) *selector = 3; - if (max1586_v6_calc_voltage(*selector) > max_uV) + if (rdev->desc->volt_table[*selector] > max_uV) return -EINVAL; dev_dbg(&client->dev, "changing voltage v6 to %dmv\n", - max1586_v6_calc_voltage(*selector) / 1000); + rdev->desc->volt_table[*selector] / 1000); v6_prog = I2C_V6_SELECT | (u8) *selector; return i2c_smbus_write_byte(client, v6_prog); } -static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector) -{ - if (selector > MAX1586_V6_MAX_VSEL) - return -EINVAL; - return max1586_v6_calc_voltage(selector); -} - /* * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back * the set up value. @@ -158,7 +146,7 @@ static struct regulator_ops max1586_v3_ops = { static struct regulator_ops max1586_v6_ops = { .set_voltage = max1586_v6_set, - .list_voltage = max1586_v6_list, + .list_voltage = regulator_list_voltage_table, }; static const struct regulator_desc max1586_reg[] = { @@ -176,6 +164,7 @@ static const struct regulator_desc max1586_reg[] = { .ops = &max1586_v6_ops, .type = REGULATOR_VOLTAGE, .n_voltages = MAX1586_V6_MAX_VSEL + 1, + .volt_table = v6_voltages_uv, .owner = THIS_MODULE, }, }; |