diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/88pm8607.c | 4 | ||||
-rw-r--r-- | drivers/regulator/Kconfig | 34 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 5 | ||||
-rw-r--r-- | drivers/regulator/ab3100.c | 5 | ||||
-rw-r--r-- | drivers/regulator/ab8500.c | 426 | ||||
-rw-r--r-- | drivers/regulator/ad5398.c | 287 | ||||
-rw-r--r-- | drivers/regulator/core.c | 6 | ||||
-rw-r--r-- | drivers/regulator/isl6271a-regulator.c | 234 | ||||
-rw-r--r-- | drivers/regulator/lp3971.c | 10 | ||||
-rw-r--r-- | drivers/regulator/max1586.c | 22 | ||||
-rw-r--r-- | drivers/regulator/max8649.c | 2 | ||||
-rw-r--r-- | drivers/regulator/max8660.c | 10 | ||||
-rw-r--r-- | drivers/regulator/max8998.c | 637 | ||||
-rw-r--r-- | drivers/regulator/tps65023-regulator.c | 2 | ||||
-rw-r--r-- | drivers/regulator/tps6507x-regulator.c | 7 | ||||
-rw-r--r-- | drivers/regulator/tps6586x-regulator.c | 396 | ||||
-rw-r--r-- | drivers/regulator/wm831x-ldo.c | 7 | ||||
-rw-r--r-- | drivers/regulator/wm8350-regulator.c | 2 | ||||
-rw-r--r-- | drivers/regulator/wm8994-regulator.c | 5 |
19 files changed, 2055 insertions, 46 deletions
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index 7d149a8d8d9b..2ce2eb71d0f5 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -215,7 +215,7 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); int ret = -EINVAL; - if (info->vol_table && (index < (2 << info->vol_nbits))) { + if (info->vol_table && (index < (1 << info->vol_nbits))) { ret = info->vol_table[index]; if (info->slope_double) ret <<= 1; @@ -233,7 +233,7 @@ static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) max_uV = max_uV >> 1; } if (info->vol_table) { - for (i = 0; i < (2 << info->vol_nbits); i++) { + for (i = 0; i < (1 << info->vol_nbits); i++) { if (!info->vol_table[i]) break; if ((min_uV <= info->vol_table[i]) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 04f2e085116a..172951bf23a4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -100,6 +100,14 @@ config REGULATOR_MAX8925 help Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. +config REGULATOR_MAX8998 + tristate "Maxim 8998 voltage regulator" + depends on MFD_MAX8998 + help + This driver controls a Maxim 8998 voltage output regulator + via I2C bus. The provided regulator is suitable for S3C6410 + and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE @@ -201,5 +209,31 @@ config REGULATOR_88PM8607 help This driver supports 88PM8607 voltage regulator chips. +config REGULATOR_ISL6271A + tristate "Intersil ISL6271A Power regulator" + depends on I2C + help + This driver supports ISL6271A voltage regulator chip. + +config REGULATOR_AD5398 + tristate "Analog Devices AD5398/AD5821 regulators" + depends on I2C + help + This driver supports AD5398 and AD5821 current regulator chips. + If building into module, its name is ad5398.ko. + +config REGULATOR_AB8500 + bool "ST-Ericsson AB8500 Power Regulators" + depends on AB8500_CORE + help + This driver supports the regulators found on the ST-Ericsson mixed + signal AB8500 PMIC + +config REGULATOR_TPS6586X + tristate "TI TPS6586X Power regulators" + depends on MFD_TPS6586X + help + This driver supports TPS6586X voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4e7feece22d5..8285fd832e16 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o +obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_DUMMY) += dummy.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o @@ -16,12 +17,14 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o +obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o +obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o @@ -31,5 +34,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o +obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o +obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 11790990277a..b349266a43de 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -634,12 +634,9 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev) "%s: failed to register regulator %s err %d\n", __func__, ab3100_regulator_desc[i].name, err); - i--; /* remove the already registered regulators */ - while (i > 0) { + while (--i >= 0) regulator_unregister(ab3100_regulators[i].rdev); - i--; - } return err; } diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c new file mode 100644 index 000000000000..28c7ae67cec9 --- /dev/null +++ b/drivers/regulator/ab8500.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * + * AB8500 peripheral regulators + * + * AB8500 supports the following regulators, + * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT, + * VAUX1/2/3, VANA + * + * for DB8500 cut 1.0 and previous versions of the silicon, all accesses + * to registers are through the DB8500 SPI. In cut 1.1 onwards, these + * accesses are through the DB8500 PRCMU I2C + * + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/mfd/ab8500.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/ab8500.h> + +/** + * struct ab8500_regulator_info - ab8500 regulator information + * @desc: regulator description + * @ab8500: ab8500 parent + * @regulator_dev: regulator device + * @max_uV: maximum voltage (for variable voltage supplies) + * @min_uV: minimum voltage (for variable voltage supplies) + * @fixed_uV: typical voltage (for fixed voltage supplies) + * @update_reg: register to control on/off + * @mask: mask to enable/disable regulator + * @enable: bits to enable the regulator in normal(high power) mode + * @voltage_reg: register to control regulator voltage + * @voltage_mask: mask to control regulator voltage + * @supported_voltages: supported voltage table + * @voltages_len: number of supported voltages for the regulator + */ +struct ab8500_regulator_info { + struct device *dev; + struct regulator_desc desc; + struct ab8500 *ab8500; + struct regulator_dev *regulator; + int max_uV; + int min_uV; + int fixed_uV; + int update_reg; + int mask; + int enable; + int voltage_reg; + int voltage_mask; + int const *supported_voltages; + int voltages_len; +}; + +/* voltage tables for the vauxn/vintcore supplies */ +static const int ldo_vauxn_voltages[] = { + 1100000, + 1200000, + 1300000, + 1400000, + 1500000, + 1800000, + 1850000, + 1900000, + 2500000, + 2650000, + 2700000, + 2750000, + 2800000, + 2900000, + 3000000, + 3300000, +}; + +static const int ldo_vintcore_voltages[] = { + 1200000, + 1225000, + 1250000, + 1275000, + 1300000, + 1325000, + 1350000, +}; + +static int ab8500_regulator_enable(struct regulator_dev *rdev) +{ + int regulator_id, ret; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + ret = ab8500_set_bits(info->ab8500, info->update_reg, + info->mask, info->enable); + if (ret < 0) + dev_err(rdev_get_dev(rdev), + "couldn't set enable bits for regulator\n"); + return ret; +} + +static int ab8500_regulator_disable(struct regulator_dev *rdev) +{ + int regulator_id, ret; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + ret = ab8500_set_bits(info->ab8500, info->update_reg, + info->mask, 0x0); + if (ret < 0) + dev_err(rdev_get_dev(rdev), + "couldn't set disable bits for regulator\n"); + return ret; +} + +static int ab8500_regulator_is_enabled(struct regulator_dev *rdev) +{ + int regulator_id, ret; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + ret = ab8500_read(info->ab8500, info->update_reg); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "couldn't read 0x%x register\n", info->update_reg); + return ret; + } + + if (ret & info->mask) + return true; + else + return false; +} + +static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector) +{ + int regulator_id; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + /* return the uV for the fixed regulators */ + if (info->fixed_uV) + return info->fixed_uV; + + if (selector >= info->voltages_len) + return -EINVAL; + + return info->supported_voltages[selector]; +} + +static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) +{ + int regulator_id, ret, val; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + ret = ab8500_read(info->ab8500, info->voltage_reg); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "couldn't read voltage reg for regulator\n"); + return ret; + } + + /* vintcore has a different layout */ + val = ret & info->voltage_mask; + if (regulator_id == AB8500_LDO_INTCORE) + ret = info->supported_voltages[val >> 0x3]; + else + ret = info->supported_voltages[val]; + + return ret; +} + +static int ab8500_get_best_voltage_index(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + int i; + + /* check the supported voltage */ + for (i = 0; i < info->voltages_len; i++) { + if ((info->supported_voltages[i] >= min_uV) && + (info->supported_voltages[i] <= max_uV)) + return i; + } + + return -EINVAL; +} + +static int ab8500_regulator_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int regulator_id, ret; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + /* get the appropriate voltages within the range */ + ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "couldn't get best voltage for regulator\n"); + return ret; + } + + /* set the registers for the request */ + ret = ab8500_set_bits(info->ab8500, info->voltage_reg, + info->voltage_mask, ret); + if (ret < 0) + dev_err(rdev_get_dev(rdev), + "couldn't set voltage reg for regulator\n"); + + return ret; +} + +static struct regulator_ops ab8500_regulator_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .get_voltage = ab8500_regulator_get_voltage, + .set_voltage = ab8500_regulator_set_voltage, + .list_voltage = ab8500_list_voltage, +}; + +static int ab8500_fixed_get_voltage(struct regulator_dev *rdev) +{ + int regulator_id; + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= AB8500_NUM_REGULATORS) + return -EINVAL; + + return info->fixed_uV; +} + +static struct regulator_ops ab8500_ldo_fixed_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .get_voltage = ab8500_fixed_get_voltage, + .list_voltage = ab8500_list_voltage, +}; + +#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \ + volt_reg, volt_mask, voltages, \ + len_volts) \ +{ \ + .desc = { \ + .name = "LDO-" #_id, \ + .ops = &ab8500_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = AB8500_LDO_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .update_reg = reg, \ + .mask = reg_mask, \ + .enable = reg_enable, \ + .voltage_reg = volt_reg, \ + .voltage_mask = volt_mask, \ + .supported_voltages = voltages, \ + .voltages_len = len_volts, \ + .fixed_uV = 0, \ +} + +#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \ + reg_enable) \ +{ \ + .desc = { \ + .name = "LDO-" #_id, \ + .ops = &ab8500_ldo_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = AB8500_LDO_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .fixed_uV = fixed * 1000, \ + .update_reg = reg, \ + .mask = reg_mask, \ + .enable = reg_enable, \ +} + +static struct ab8500_regulator_info ab8500_regulator_info[] = { + /* + * Variable Voltage LDOs + * name, min uV, max uV, ctrl reg, reg mask, enable mask, + * volt ctrl reg, volt ctrl mask, volt table, num supported volts + */ + AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf, + ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), + AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf, + ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), + AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf, + ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)), + AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38, + ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)), + + /* + * Fixed Voltage LDOs + * name, o/p uV, ctrl reg, enable, disable + */ + AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2), + AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2), + AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4), + AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8), + AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10), + AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4), +}; + +static inline struct ab8500_regulator_info *find_regulator_info(int id) +{ + struct ab8500_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { + info = &ab8500_regulator_info[i]; + if (info->desc.id == id) + return info; + } + return NULL; +} + +static __devinit int ab8500_regulator_probe(struct platform_device *pdev) +{ + struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); + struct ab8500_platform_data *pdata; + int i, err; + + if (!ab8500) { + dev_err(&pdev->dev, "null mfd parent\n"); + return -EINVAL; + } + pdata = dev_get_platdata(ab8500->dev); + + /* register all regulators */ + for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { + struct ab8500_regulator_info *info = NULL; + + /* assign per-regulator data */ + info = &ab8500_regulator_info[i]; + info->dev = &pdev->dev; + info->ab8500 = ab8500; + + info->regulator = regulator_register(&info->desc, &pdev->dev, + pdata->regulator[i], info); + if (IS_ERR(info->regulator)) { + err = PTR_ERR(info->regulator); + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + /* when we fail, un-register all earlier regulators */ + while (--i >= 0) { + info = &ab8500_regulator_info[i]; + regulator_unregister(info->regulator); + } + return err; + } + } + + return 0; +} + +static __devexit int ab8500_regulator_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { + struct ab8500_regulator_info *info = NULL; + info = &ab8500_regulator_info[i]; + regulator_unregister(info->regulator); + } + + return 0; +} + +static struct platform_driver ab8500_regulator_driver = { + .probe = ab8500_regulator_probe, + .remove = __devexit_p(ab8500_regulator_remove), + .driver = { + .name = "ab8500-regulator", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_regulator_init(void) +{ + int ret; + + ret = platform_driver_register(&ab8500_regulator_driver); + if (ret != 0) + pr_err("Failed to register ab8500 regulator: %d\n", ret); + + return ret; +} +subsys_initcall(ab8500_regulator_init); + +static void __exit ab8500_regulator_exit(void) +{ + platform_driver_unregister(&ab8500_regulator_driver); +} +module_exit(ab8500_regulator_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>"); +MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC"); +MODULE_ALIAS("platform:ab8500-regulator"); diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c new file mode 100644 index 000000000000..a4be41614eeb --- /dev/null +++ b/drivers/regulator/ad5398.c @@ -0,0 +1,287 @@ +/* + * Voltage and current regulation for AD5398 and AD5821 + * + * Copyright 2010 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#define AD5398_CURRENT_EN_MASK 0x8000 + +struct ad5398_chip_info { + struct i2c_client *client; + int min_uA; + int max_uA; + unsigned int current_level; + unsigned int current_mask; + unsigned int current_offset; + struct regulator_dev *rdev; +}; + +static int ad5398_calc_current(struct ad5398_chip_info *chip, + unsigned selector) +{ + unsigned range_uA = chip->max_uA - chip->min_uA; + + return chip->min_uA + (selector * range_uA / chip->current_level); +} + +static int ad5398_read_reg(struct i2c_client *client, unsigned short *data) +{ + unsigned short val; + int ret; + + ret = i2c_master_recv(client, (char *)&val, 2); + if (ret < 0) { + dev_err(&client->dev, "I2C read error\n"); + return ret; + } + *data = be16_to_cpu(val); + + return ret; +} + +static int ad5398_write_reg(struct i2c_client *client, const unsigned short data) +{ + unsigned short val; + int ret; + + val = cpu_to_be16(data); + ret = i2c_master_send(client, (char *)&val, 2); + if (ret < 0) + dev_err(&client->dev, "I2C write error\n"); + + return ret; +} + +static int ad5398_get_current_limit(struct regulator_dev *rdev) +{ + struct ad5398_chip_info *chip = rdev_get_drvdata(rdev); + struct i2c_client *client = chip->client; + unsigned short data; + int ret; + + ret = ad5398_read_reg(client, &data); + if (ret < 0) + return ret; + + ret = (data & chip->current_mask) >> chip->current_offset; + + return ad5398_calc_current(chip, ret); +} + +static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) +{ + struct ad5398_chip_info *chip = rdev_get_drvdata(rdev); + struct i2c_client *client = chip->client; + unsigned range_uA = chip->max_uA - chip->min_uA; + unsigned selector; + unsigned short data; + int ret; + + if (min_uA > chip->max_uA || min_uA < chip->min_uA) + return -EINVAL; + if (max_uA > chip->max_uA || max_uA < chip->min_uA) + return -EINVAL; + + selector = ((min_uA - chip->min_uA) * chip->current_level + + range_uA - 1) / range_uA; + if (ad5398_calc_current(chip, selector) > max_uA) + return -EINVAL; + + dev_dbg(&client->dev, "changing current %dmA\n", + ad5398_calc_current(chip, selector) / 1000); + + /* read chip enable bit */ + ret = ad5398_read_reg(client, &data); + if (ret < 0) + return ret; + + /* prepare register data */ + selector = (selector << chip->current_offset) & chip->current_mask; + data = (unsigned short)selector | (data & AD5398_CURRENT_EN_MASK); + + /* write the new current value back as well as enable bit */ + ret = ad5398_write_reg(client, data); + + return ret; +} + +static int ad5398_is_enabled(struct regulator_dev *rdev) +{ + struct ad5398_chip_info *chip = rdev_get_drvdata(rdev); + struct i2c_client *client = chip->client; + unsigned short data; + int ret; + + ret = ad5398_read_reg(client, &data); + if (ret < 0) + return ret; + + if (data & AD5398_CURRENT_EN_MASK) + return 1; + else + return 0; +} + +static int ad5398_enable(struct regulator_dev *rdev) +{ + struct ad5398_chip_info *chip = rdev_get_drvdata(rdev); + struct i2c_client *client = chip->client; + unsigned short data; + int ret; + + ret = ad5398_read_reg(client, &data); + if (ret < 0) + return ret; + + if (data & AD5398_CURRENT_EN_MASK) + return 0; + + data |= AD5398_CURRENT_EN_MASK; + + ret = ad5398_write_reg(client, data); + + return ret; +} + +static int ad5398_disable(struct regulator_dev *rdev) +{ + struct ad5398_chip_info *chip = rdev_get_drvdata(rdev); + struct i2c_client *client = chip->client; + unsigned short data; + int ret; + + ret = ad5398_read_reg(client, &data); + if (ret < 0) + return ret; + + if (!(data & AD5398_CURRENT_EN_MASK)) + return 0; + + data &= ~AD5398_CURRENT_EN_MASK; + + ret = ad5398_write_reg(client, data); + + return ret; +} + +static struct regulator_ops ad5398_ops = { + .get_current_limit = ad5398_get_current_limit, + .set_current_limit = ad5398_set_current_limit, + .enable = ad5398_enable, + .disable = ad5398_disable, + .is_enabled = ad5398_is_enabled, +}; + +static struct regulator_desc ad5398_reg = { + .name = "isink", + .id = 0, + .ops = &ad5398_ops, + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, +}; + +struct ad5398_current_data_format { + int current_bits; + int current_offset; + int min_uA; + int max_uA; +}; + +static const struct ad5398_current_data_format df_10_4_120 = {10, 4, 0, 120000}; + +static const struct i2c_device_id ad5398_id[] = { + { "ad5398", (kernel_ulong_t)&df_10_4_120 }, + { "ad5821", (kernel_ulong_t)&df_10_4_120 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad5398_id); + +static int __devinit ad5398_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = client->dev.platform_data; + struct ad5398_chip_info *chip; + const struct ad5398_current_data_format *df = + (struct ad5398_current_data_format *)id->driver_data; + int ret; + + if (!init_data) + return -EINVAL; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + + chip->min_uA = df->min_uA; + chip->max_uA = df->max_uA; + chip->current_level = 1 << df->current_bits; + chip->current_offset = df->current_offset; + chip->current_mask = (chip->current_level - 1) << chip->current_offset; + + chip->rdev = regulator_register(&ad5398_reg, &client->dev, + init_data, chip); + if (IS_ERR(chip->rdev)) { + ret = PTR_ERR(chip->rdev); + dev_err(&client->dev, "failed to register %s %s\n", + id->name, ad5398_reg.name); + goto err; + } + + i2c_set_clientdata(client, chip); + dev_dbg(&client->dev, "%s regulator driver is registered.\n", id->name); + return 0; + +err: + kfree(chip); + return ret; +} + +static int __devexit ad5398_remove(struct i2c_client *client) +{ + struct ad5398_chip_info *chip = i2c_get_clientdata(client); + + regulator_unregister(chip->rdev); + kfree(chip); + + return 0; +} + +static struct i2c_driver ad5398_driver = { + .probe = ad5398_probe, + .remove = __devexit_p(ad5398_remove), + .driver = { + .name = "ad5398", + }, + .id_table = ad5398_id, +}; + +static int __init ad5398_init(void) +{ + return i2c_add_driver(&ad5398_driver); +} +subsys_initcall(ad5398_init); + +static void __exit ad5398_exit(void) +{ + i2c_del_driver(&ad5398_driver); +} +module_exit(ad5398_exit); + +MODULE_DESCRIPTION("AD5398 and AD5821 current regulator driver"); +MODULE_AUTHOR("Sonic Zhang"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:ad5398-regulator"); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 422a709d271d..cc8b337b9119 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -700,7 +700,7 @@ static void print_constraints(struct regulator_dev *rdev) constraints->min_uA != constraints->max_uA) { ret = _regulator_get_current_limit(rdev); if (ret > 0) - count += sprintf(buf + count, "at %d uA ", ret / 1000); + count += sprintf(buf + count, "at %d mA ", ret / 1000); } if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) @@ -2302,8 +2302,10 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, dev_set_name(&rdev->dev, "regulator.%d", atomic_inc_return(®ulator_no) - 1); ret = device_register(&rdev->dev); - if (ret != 0) + if (ret != 0) { + put_device(&rdev->dev); goto clean; + } dev_set_drvdata(&rdev->dev, rdev); diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c new file mode 100644 index 000000000000..b8cc6389a541 --- /dev/null +++ b/drivers/regulator/isl6271a-regulator.c @@ -0,0 +1,234 @@ +/* + * isl6271a-regulator.c + * + * Support for Intersil ISL6271A voltage regulator + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#define ISL6271A_VOLTAGE_MIN 850000 +#define ISL6271A_VOLTAGE_MAX 1600000 +#define ISL6271A_VOLTAGE_STEP 50000 + +/* PMIC details */ +struct isl_pmic { + struct i2c_client *client; + struct regulator_dev *rdev[3]; + struct mutex mtx; +}; + +static int isl6271a_get_voltage(struct regulator_dev *dev) +{ + struct isl_pmic *pmic = rdev_get_drvdata(dev); + int idx, data; + + mutex_lock(&pmic->mtx); + + idx = i2c_smbus_read_byte(pmic->client); + if (idx < 0) { + dev_err(&pmic->client->dev, "Error getting voltage\n"); + data = idx; + goto out; + } + + /* Convert the data from chip to microvolts */ + data = ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * (idx & 0xf)); + +out: + mutex_unlock(&pmic->mtx); + return data; +} + +static int isl6271a_set_voltage(struct regulator_dev *dev, int minuV, int maxuV) +{ + struct isl_pmic *pmic = rdev_get_drvdata(dev); + int vsel, err, data; + + if (minuV < ISL6271A_VOLTAGE_MIN || minuV > ISL6271A_VOLTAGE_MAX) + return -EINVAL; + if (maxuV < ISL6271A_VOLTAGE_MIN || maxuV > ISL6271A_VOLTAGE_MAX) + return -EINVAL; + + /* Align to 50000 mV */ + vsel = minuV - (minuV % ISL6271A_VOLTAGE_STEP); + + /* If the result fell out of [minuV,maxuV] range, put it back */ + if (vsel < minuV) + vsel += ISL6271A_VOLTAGE_STEP; + + /* Convert the microvolts to data for the chip */ + data = (vsel - ISL6271A_VOLTAGE_MIN) / ISL6271A_VOLTAGE_STEP; + + mutex_lock(&pmic->mtx); + + err = i2c_smbus_write_byte(pmic->client, data); + if (err < 0) + dev_err(&pmic->client->dev, "Error setting voltage\n"); + + mutex_unlock(&pmic->mtx); + return err; +} + +static int isl6271a_list_voltage(struct regulator_dev *dev, unsigned selector) +{ + return ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * selector); +} + +static struct regulator_ops isl_core_ops = { + .get_voltage = isl6271a_get_voltage, + .set_voltage = isl6271a_set_voltage, + .list_voltage = isl6271a_list_voltage, +}; + +static int isl6271a_get_fixed_voltage(struct regulator_dev *dev) +{ + int id = rdev_get_id(dev); + return (id == 1) ? 1100000 : 1300000; +} + +static int isl6271a_list_fixed_voltage(struct regulator_dev *dev, unsigned selector) +{ + int id = rdev_get_id(dev); + return (id == 1) ? 1100000 : 1300000; +} + +static struct regulator_ops isl_fixed_ops = { + .get_voltage = isl6271a_get_fixed_voltage, + .list_voltage = isl6271a_list_fixed_voltage, +}; + +static struct regulator_desc isl_rd[] = { + { + .name = "Core Buck", + .id = 0, + .n_voltages = 16, + .ops = &isl_core_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO1", + .id = 1, + .n_voltages = 1, + .ops = &isl_fixed_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO2", + .id = 2, + .n_voltages = 1, + .ops = &isl_fixed_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int __devinit isl6271a_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = i2c->dev.platform_data; + struct isl_pmic *pmic; + int err, i; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (!init_data) { + dev_err(&i2c->dev, "no platform data supplied\n"); + return -EIO; + } + + pmic = kzalloc(sizeof(struct isl_pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + pmic->client = i2c; + + mutex_init(&pmic->mtx); + + for (i = 0; i < 3; i++) { + pmic->rdev[i] = regulator_register(&isl_rd[i], &i2c->dev, + init_data, pmic); + if (IS_ERR(pmic->rdev[i])) { + dev_err(&i2c->dev, "failed to register %s\n", id->name); + err = PTR_ERR(pmic->rdev); + goto error; + } + } + + i2c_set_clientdata(i2c, pmic); + + return 0; + +error: + while (--i >= 0) + regulator_unregister(pmic->rdev[i]); + + kfree(pmic); + return err; +} + +static int __devexit isl6271a_remove(struct i2c_client *i2c) +{ + struct isl_pmic *pmic = i2c_get_clientdata(i2c); + int i; + + for (i = 0; i < 3; i++) + regulator_unregister(pmic->rdev[i]); + + kfree(pmic); + + return 0; +} + +static const struct i2c_device_id isl6271a_id[] = { + {.name = "isl6271a", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, isl6271a_id); + +static struct i2c_driver isl6271a_i2c_driver = { + .driver = { + .name = "isl6271a", + .owner = THIS_MODULE, + }, + .probe = isl6271a_probe, + .remove = __devexit_p(isl6271a_remove), + .id_table = isl6271a_id, +}; + +static int __init isl6271a_init(void) +{ + return i2c_add_driver(&isl6271a_i2c_driver); +} + +static void __exit isl6271a_cleanup(void) +{ + i2c_del_driver(&isl6271a_i2c_driver); +} + +subsys_initcall(isl6271a_init); +module_exit(isl6271a_cleanup); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("Intersil ISL6271A voltage regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 8ae3732eb24b..3bb82b624e19 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -377,7 +377,7 @@ static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count, if (count != 1) return -EIO; ret = i2c_smbus_read_byte_data(i2c, reg); - if (ret < 0 || count != 1) + if (ret < 0) return -EIO; *dest = ret; @@ -387,15 +387,9 @@ static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count, static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count, const u16 *src) { - int ret; - if (count != 1) return -EIO; - ret = i2c_smbus_write_byte_data(i2c, reg, *src); - if (ret >= 0) - return 0; - - return ret; + return i2c_smbus_write_byte_data(i2c, reg, *src); } static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg) diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index 2b54d9d75f11..559cfa271a44 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -121,14 +121,14 @@ static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV) if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV) return -EINVAL; - if (min_uV >= 3000000) - selector = 3; - if (min_uV < 3000000) - selector = 2; - if (min_uV < 2500000) - selector = 1; if (min_uV < 1800000) selector = 0; + else if (min_uV < 2500000) + selector = 1; + else if (min_uV < 3000000) + selector = 2; + else if (min_uV >= 3000000) + selector = 3; if (max1586_v6_calc_voltage(selector) > max_uV) return -EINVAL; @@ -223,7 +223,7 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client, } } - i2c_set_clientdata(client, rdev); + i2c_set_clientdata(client, max1586); dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n"); return 0; @@ -238,13 +238,13 @@ out: static int __devexit max1586_pmic_remove(struct i2c_client *client) { - struct regulator_dev **rdev = i2c_get_clientdata(client); + struct max1586_data *max1586 = i2c_get_clientdata(client); int i; for (i = 0; i <= MAX1586_V6; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); - kfree(rdev); + if (max1586->rdev[i]) + regulator_unregister(max1586->rdev[i]); + kfree(max1586); return 0; } diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 4520ace3f7e7..6b60a9c0366b 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -330,7 +330,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client, /* set external clock frequency */ info->extclk_freq = pdata->extclk_freq; max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK, - info->extclk_freq); + info->extclk_freq << 6); } if (pdata->ramp_timing) { diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c index d97220efae5a..c570e6eb0db2 100644 --- a/drivers/regulator/max8660.c +++ b/drivers/regulator/max8660.c @@ -450,7 +450,7 @@ static int __devinit max8660_probe(struct i2c_client *client, } } - i2c_set_clientdata(client, rdev); + i2c_set_clientdata(client, max8660); dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); return 0; @@ -465,13 +465,13 @@ out: static int __devexit max8660_remove(struct i2c_client *client) { - struct regulator_dev **rdev = i2c_get_clientdata(client); + struct max8660 *max8660 = i2c_get_clientdata(client); int i; for (i = 0; i < MAX8660_V_END; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); - kfree(rdev); + if (max8660->rdev[i]) + regulator_unregister(max8660->rdev[i]); + kfree(max8660); return 0; } diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c new file mode 100644 index 000000000000..a1baf1fbe004 --- /dev/null +++ b/drivers/regulator/max8998.c @@ -0,0 +1,637 @@ +/* + * max8998.c - Voltage regulator driver for the Maxim 8998 + * + * Copyright (C) 2009-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/max8998.h> +#include <linux/mfd/max8998-private.h> + +struct max8998_data { + struct device *dev; + struct max8998_dev *iodev; + int num_regulators; + struct regulator_dev **rdev; +}; + +struct voltage_map_desc { + int min; + int max; + int step; +}; + +/* Voltage maps */ +static const struct voltage_map_desc ldo23_voltage_map_desc = { + .min = 800, .step = 50, .max = 1300, +}; +static const struct voltage_map_desc ldo456711_voltage_map_desc = { + .min = 1600, .step = 100, .max = 3600, +}; +static const struct voltage_map_desc ldo8_voltage_map_desc = { + .min = 3000, .step = 100, .max = 3600, +}; +static const struct voltage_map_desc ldo9_voltage_map_desc = { + .min = 2800, .step = 100, .max = 3100, +}; +static const struct voltage_map_desc ldo10_voltage_map_desc = { + .min = 950, .step = 50, .max = 1300, +}; +static const struct voltage_map_desc ldo1213_voltage_map_desc = { + .min = 800, .step = 100, .max = 3300, +}; +static const struct voltage_map_desc ldo1415_voltage_map_desc = { + .min = 1200, .step = 100, .max = 3300, +}; +static const struct voltage_map_desc ldo1617_voltage_map_desc = { + .min = 1600, .step = 100, .max = 3600, +}; +static const struct voltage_map_desc buck12_voltage_map_desc = { + .min = 750, .step = 25, .max = 1525, +}; +static const struct voltage_map_desc buck3_voltage_map_desc = { + .min = 1600, .step = 100, .max = 3600, +}; +static const struct voltage_map_desc buck4_voltage_map_desc = { + .min = 800, .step = 100, .max = 2300, +}; + +static const struct voltage_map_desc *ldo_voltage_map[] = { + NULL, + NULL, + &ldo23_voltage_map_desc, /* LDO2 */ + &ldo23_voltage_map_desc, /* LDO3 */ + &ldo456711_voltage_map_desc, /* LDO4 */ + &ldo456711_voltage_map_desc, /* LDO5 */ + &ldo456711_voltage_map_desc, /* LDO6 */ + &ldo456711_voltage_map_desc, /* LDO7 */ + &ldo8_voltage_map_desc, /* LDO8 */ + &ldo9_voltage_map_desc, /* LDO9 */ + &ldo10_voltage_map_desc, /* LDO10 */ + &ldo456711_voltage_map_desc, /* LDO11 */ + &ldo1213_voltage_map_desc, /* LDO12 */ + &ldo1213_voltage_map_desc, /* LDO13 */ + &ldo1415_voltage_map_desc, /* LDO14 */ + &ldo1415_voltage_map_desc, /* LDO15 */ + &ldo1617_voltage_map_desc, /* LDO16 */ + &ldo1617_voltage_map_desc, /* LDO17 */ + &buck12_voltage_map_desc, /* BUCK1 */ + &buck12_voltage_map_desc, /* BUCK2 */ + &buck3_voltage_map_desc, /* BUCK3 */ + &buck4_voltage_map_desc, /* BUCK4 */ +}; + +static inline int max8998_get_ldo(struct regulator_dev *rdev) +{ + return rdev_get_id(rdev); +} + +static int max8998_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct voltage_map_desc *desc; + int ldo = max8998_get_ldo(rdev); + int val; + + if (ldo >= ARRAY_SIZE(ldo_voltage_map)) + return -EINVAL; + + desc = ldo_voltage_map[ldo]; + if (desc == NULL) + return -EINVAL; + + val = desc->min + desc->step * selector; + if (val > desc->max) + return -EINVAL; + + return val * 1000; +} + +static int max8998_get_enable_register(struct regulator_dev *rdev, + int *reg, int *shift) +{ + int ldo = max8998_get_ldo(rdev); + + switch (ldo) { + case MAX8998_LDO2 ... MAX8998_LDO5: + *reg = MAX8998_REG_ONOFF1; + *shift = 3 - (ldo - MAX8998_LDO2); + break; + case MAX8998_LDO6 ... MAX8998_LDO13: + *reg = MAX8998_REG_ONOFF2; + *shift = 7 - (ldo - MAX8998_LDO6); + break; + case MAX8998_LDO14 ... MAX8998_LDO17: + *reg = MAX8998_REG_ONOFF3; + *shift = 7 - (ldo - MAX8998_LDO14); + break; + case MAX8998_BUCK1 ... MAX8998_BUCK4: + *reg = MAX8998_REG_ONOFF1; + *shift = 7 - (ldo - MAX8998_BUCK1); + break; + case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG: + *reg = MAX8998_REG_ONOFF4; + *shift = 7 - (ldo - MAX8998_EN32KHZ_AP); + break; + case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2: + *reg = MAX8998_REG_CHGR2; + *shift = 7 - (ldo - MAX8998_ESAFEOUT1); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int max8998_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int ret, reg, shift = 8; + u8 val; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + ret = max8998_read_reg(max8998->iodev, reg, &val); + if (ret) + return ret; + + return val & (1 << shift); +} + +static int max8998_ldo_enable(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int reg, shift = 8, ret; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + return max8998_update_reg(max8998->iodev, reg, 1<<shift, 1<<shift); +} + +static int max8998_ldo_disable(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int reg, shift = 8, ret; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + return max8998_update_reg(max8998->iodev, reg, 0, 1<<shift); +} + +static int max8998_get_voltage_register(struct regulator_dev *rdev, + int *_reg, int *_shift, int *_mask) +{ + int ldo = max8998_get_ldo(rdev); + int reg, shift = 0, mask = 0xff; + + switch (ldo) { + case MAX8998_LDO2 ... MAX8998_LDO3: + reg = MAX8998_REG_LDO2_LDO3; + mask = 0xf; + if (ldo == MAX8998_LDO2) + shift = 4; + else + shift = 0; + break; + case MAX8998_LDO4 ... MAX8998_LDO7: + reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4); + break; + case MAX8998_LDO8 ... MAX8998_LDO9: + reg = MAX8998_REG_LDO8_LDO9; + mask = 0xf; + if (ldo == MAX8998_LDO8) + shift = 4; + else + shift = 0; + break; + case MAX8998_LDO10 ... MAX8998_LDO11: + reg = MAX8998_REG_LDO10_LDO11; + if (ldo == MAX8998_LDO10) { + shift = 5; + mask = 0x7; + } else { + shift = 0; + mask = 0x1f; + } + break; + case MAX8998_LDO12 ... MAX8998_LDO17: + reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12); + break; + case MAX8998_BUCK1: + reg = MAX8998_REG_BUCK1_DVSARM1; + break; + case MAX8998_BUCK2: + reg = MAX8998_REG_BUCK2_DVSINT1; + break; + case MAX8998_BUCK3: + reg = MAX8998_REG_BUCK3; + break; + case MAX8998_BUCK4: + reg = MAX8998_REG_BUCK4; + break; + default: + return -EINVAL; + } + + *_reg = reg; + *_shift = shift; + *_mask = mask; + + return 0; +} + +static int max8998_get_voltage(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int reg, shift = 0, mask, ret; + u8 val; + + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + ret = max8998_read_reg(max8998->iodev, reg, &val); + if (ret) + return ret; + + val >>= shift; + val &= mask; + + return max8998_list_voltage(rdev, val); +} + +static int max8998_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + int previous_vol = 0; + const struct voltage_map_desc *desc; + int ldo = max8998_get_ldo(rdev); + int reg, shift = 0, mask, ret; + int i = 0; + u8 val; + bool en_ramp = false; + + if (ldo >= ARRAY_SIZE(ldo_voltage_map)) + return -EINVAL; + + desc = ldo_voltage_map[ldo]; + if (desc == NULL) + return -EINVAL; + + if (max_vol < desc->min || min_vol > desc->max) + return -EINVAL; + + while (desc->min + desc->step*i < min_vol && + desc->min + desc->step*i < desc->max) + i++; + + if (desc->min + desc->step*i > max_vol) + return -EINVAL; + + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + /* wait for RAMP_UP_DELAY if rdev is BUCK1/2 and + * ENRAMP is ON */ + if (ldo == MAX8998_BUCK1 || ldo == MAX8998_BUCK2) { + max8998_read_reg(max8998->iodev, MAX8998_REG_ONOFF4, &val); + if (val & (1 << 4)) { + en_ramp = true; + previous_vol = max8998_get_voltage(rdev); + } + } + + ret = max8998_update_reg(max8998->iodev, reg, i<<shift, mask<<shift); + + if (en_ramp == true) { + int difference = desc->min + desc->step*i - previous_vol/1000; + if (difference > 0) + udelay(difference / ((val & 0x0f) + 1)); + } + + return ret; +} + +static struct regulator_ops max8998_ldo_ops = { + .list_voltage = max8998_list_voltage, + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, + .get_voltage = max8998_get_voltage, + .set_voltage = max8998_set_voltage, + .set_suspend_enable = max8998_ldo_enable, + .set_suspend_disable = max8998_ldo_disable, +}; + +static struct regulator_ops max8998_buck_ops = { + .list_voltage = max8998_list_voltage, + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, + .get_voltage = max8998_get_voltage, + .set_voltage = max8998_set_voltage, + .set_suspend_enable = max8998_ldo_enable, + .set_suspend_disable = max8998_ldo_disable, +}; + +static struct regulator_ops max8998_others_ops = { + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, + .set_suspend_enable = max8998_ldo_enable, + .set_suspend_disable = max8998_ldo_disable, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO2", + .id = MAX8998_LDO2, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO3", + .id = MAX8998_LDO3, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO4", + .id = MAX8998_LDO4, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO5", + .id = MAX8998_LDO5, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO6", + .id = MAX8998_LDO6, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO7", + .id = MAX8998_LDO7, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO8", + .id = MAX8998_LDO8, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO9", + .id = MAX8998_LDO9, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO10", + .id = MAX8998_LDO10, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO11", + .id = MAX8998_LDO11, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO12", + .id = MAX8998_LDO12, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO13", + .id = MAX8998_LDO13, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO14", + .id = MAX8998_LDO14, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO15", + .id = MAX8998_LDO15, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO16", + .id = MAX8998_LDO16, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "LDO17", + .id = MAX8998_LDO17, + .ops = &max8998_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "BUCK1", + .id = MAX8998_BUCK1, + .ops = &max8998_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "BUCK2", + .id = MAX8998_BUCK2, + .ops = &max8998_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "BUCK3", + .id = MAX8998_BUCK3, + .ops = &max8998_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "BUCK4", + .id = MAX8998_BUCK4, + .ops = &max8998_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "EN32KHz AP", + .id = MAX8998_EN32KHZ_AP, + .ops = &max8998_others_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "EN32KHz CP", + .id = MAX8998_EN32KHZ_CP, + .ops = &max8998_others_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ENVICHG", + .id = MAX8998_ENVICHG, + .ops = &max8998_others_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ESAFEOUT1", + .id = MAX8998_ESAFEOUT1, + .ops = &max8998_others_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "ESAFEOUT2", + .id = MAX8998_ESAFEOUT2, + .ops = &max8998_others_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + } +}; + +static __devinit int max8998_pmic_probe(struct platform_device *pdev) +{ + struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); + struct regulator_dev **rdev; + struct max8998_data *max8998; + int i, ret, size; + + if (!pdata) { + dev_err(pdev->dev.parent, "No platform init data supplied\n"); + return -ENODEV; + } + + max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL); + if (!max8998) + return -ENOMEM; + + size = sizeof(struct regulator_dev *) * pdata->num_regulators; + max8998->rdev = kzalloc(size, GFP_KERNEL); + if (!max8998->rdev) { + kfree(max8998); + return -ENOMEM; + } + + rdev = max8998->rdev; + max8998->dev = &pdev->dev; + max8998->iodev = iodev; + max8998->num_regulators = pdata->num_regulators; + platform_set_drvdata(pdev, max8998); + + for (i = 0; i < pdata->num_regulators; i++) { + const struct voltage_map_desc *desc; + int id = pdata->regulators[i].id; + int index = id - MAX8998_LDO2; + + desc = ldo_voltage_map[id]; + if (desc && regulators[index].ops != &max8998_others_ops) { + int count = (desc->max - desc->min) / desc->step + 1; + regulators[index].n_voltages = count; + } + rdev[i] = regulator_register(®ulators[index], max8998->dev, + pdata->regulators[i].initdata, max8998); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(max8998->dev, "regulator init failed\n"); + rdev[i] = NULL; + goto err; + } + } + + + return 0; +err: + for (i = 0; i < max8998->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + kfree(max8998->rdev); + kfree(max8998); + + return ret; +} + +static int __devexit max8998_pmic_remove(struct platform_device *pdev) +{ + struct max8998_data *max8998 = platform_get_drvdata(pdev); + struct regulator_dev **rdev = max8998->rdev; + int i; + + for (i = 0; i < max8998->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + kfree(max8998->rdev); + kfree(max8998); + + return 0; +} + +static struct platform_driver max8998_pmic_driver = { + .driver = { + .name = "max8998-pmic", + .owner = THIS_MODULE, + }, + .probe = max8998_pmic_probe, + .remove = __devexit_p(max8998_pmic_remove), +}; + +static int __init max8998_pmic_init(void) +{ + return platform_driver_register(&max8998_pmic_driver); +} +subsys_initcall(max8998_pmic_init); + +static void __exit max8998_pmic_cleanup(void) +{ + platform_driver_unregister(&max8998_pmic_driver); +} +module_exit(max8998_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver"); +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index f50afc9f287a..cd6d4fc9d74f 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -585,6 +585,8 @@ static const struct tps_info tps65023_regs[] = { static const struct i2c_device_id tps_65023_id[] = { {.name = "tps65023", .driver_data = (unsigned long) tps65023_regs,}, + {.name = "tps65021", + .driver_data = (unsigned long) tps65023_regs,}, { }, }; diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c index 8152d65220f5..020f5878d7ff 100644 --- a/drivers/regulator/tps6507x-regulator.c +++ b/drivers/regulator/tps6507x-regulator.c @@ -614,6 +614,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev) } tps6507x_dev->pmic = tps; + platform_set_drvdata(pdev, tps6507x_dev); return 0; @@ -625,12 +626,6 @@ fail: return error; } -/** - * tps6507x_remove - TPS6507x driver i2c remove handler - * @client: i2c driver client device structure - * - * Unregister TPS driver as an i2c client device driver - */ static int __devexit tps6507x_pmic_remove(struct platform_device *pdev) { struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev); diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c new file mode 100644 index 000000000000..51237fbb1bbb --- /dev/null +++ b/drivers/regulator/tps6586x-regulator.c @@ -0,0 +1,396 @@ +/* + * Regulator driver for TI TPS6586x + * + * Copyright (C) 2010 Compulab Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * Based on da903x + * Copyright (C) 2006-2008 Marvell International Ltd. + * Copyright (C) 2008 Compulab Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/tps6586x.h> + +/* supply control and voltage setting */ +#define TPS6586X_SUPPLYENA 0x10 +#define TPS6586X_SUPPLYENB 0x11 +#define TPS6586X_SUPPLYENC 0x12 +#define TPS6586X_SUPPLYEND 0x13 +#define TPS6586X_SUPPLYENE 0x14 +#define TPS6586X_VCC1 0x20 +#define TPS6586X_VCC2 0x21 +#define TPS6586X_SM1V1 0x23 +#define TPS6586X_SM1V2 0x24 +#define TPS6586X_SM1SL 0x25 +#define TPS6586X_SM0V1 0x26 +#define TPS6586X_SM0V2 0x27 +#define TPS6586X_SM0SL 0x28 +#define TPS6586X_LDO2AV1 0x29 +#define TPS6586X_LDO2AV2 0x2A +#define TPS6586X_LDO2BV1 0x2F +#define TPS6586X_LDO2BV2 0x30 +#define TPS6586X_LDO4V1 0x32 +#define TPS6586X_LDO4V2 0x33 + +/* converter settings */ +#define TPS6586X_SUPPLYV1 0x41 +#define TPS6586X_SUPPLYV2 0x42 +#define TPS6586X_SUPPLYV3 0x43 +#define TPS6586X_SUPPLYV4 0x44 +#define TPS6586X_SUPPLYV5 0x45 +#define TPS6586X_SUPPLYV6 0x46 +#define TPS6586X_SMODE1 0x47 +#define TPS6586X_SMODE2 0x48 + +struct tps6586x_regulator { + struct regulator_desc desc; + + int volt_reg; + int volt_shift; + int volt_nbits; + int enable_bit[2]; + int enable_reg[2]; + + int *voltages; + + /* for DVM regulators */ + int go_reg; + int go_bit; +}; + +static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent->parent; +} + +static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct tps6586x_regulator *info = rdev_get_drvdata(rdev); + + return info->voltages[selector] * 1000; +} + + +static int __tps6586x_ldo_set_voltage(struct device *parent, + struct tps6586x_regulator *ri, + int min_uV, int max_uV) +{ + int val, uV; + uint8_t mask; + + for (val = 0; val < ri->desc.n_voltages; val++) { + uV = ri->voltages[val] * 1000; + + /* LDO0 has minimal voltage 1.2 rather than 1.25 */ + if (ri->desc.id == TPS6586X_ID_LDO_0 && val == 0) + uV -= 50 * 1000; + + /* use the first in-range value */ + if (min_uV <= uV && uV <= max_uV) { + + val <<= ri->volt_shift; + mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; + + return tps6586x_update(parent, ri->volt_reg, val, mask); + } + } + + return -EINVAL; +} + +static int tps6586x_ldo_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + + return __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV); +} + +static int tps6586x_ldo_get_voltage(struct regulator_dev *rdev) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + uint8_t val, mask; + int ret; + + ret = tps6586x_read(parent, ri->volt_reg, &val); + if (ret) + return ret; + + mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; + val = (val & mask) >> ri->volt_shift; + + if (val >= ri->desc.n_voltages) + BUG(); + + return ri->voltages[val] * 1000; +} + +static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + int ret; + + ret = __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV); + if (ret) + return ret; + + return tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit); +} + +static int tps6586x_regulator_enable(struct regulator_dev *rdev) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + + return tps6586x_set_bits(parent, ri->enable_reg[0], + 1 << ri->enable_bit[0]); +} + +static int tps6586x_regulator_disable(struct regulator_dev *rdev) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + + return tps6586x_clr_bits(parent, ri->enable_reg[0], + 1 << ri->enable_bit[0]); +} + +static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps6586x_dev(rdev); + uint8_t reg_val; + int ret; + + ret = tps6586x_read(parent, ri->enable_reg[0], ®_val); + if (ret) + return ret; + + return !!(reg_val & (1 << ri->enable_bit[0])); +} + +static struct regulator_ops tps6586x_regulator_ldo_ops = { + .list_voltage = tps6586x_ldo_list_voltage, + .get_voltage = tps6586x_ldo_get_voltage, + .set_voltage = tps6586x_ldo_set_voltage, + + .is_enabled = tps6586x_regulator_is_enabled, + .enable = tps6586x_regulator_enable, + .disable = tps6586x_regulator_disable, +}; + +static struct regulator_ops tps6586x_regulator_dvm_ops = { + .list_voltage = tps6586x_ldo_list_voltage, + .get_voltage = tps6586x_ldo_get_voltage, + .set_voltage = tps6586x_dvm_set_voltage, + + .is_enabled = tps6586x_regulator_is_enabled, + .enable = tps6586x_regulator_enable, + .disable = tps6586x_regulator_disable, +}; + +static int tps6586x_ldo_voltages[] = { + 1250, 1500, 1800, 2500, 2700, 2850, 3100, 3300, +}; + +static int tps6586x_ldo4_voltages[] = { + 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875, + 1900, 1925, 1950, 1975, 2000, 2025, 2050, 2075, + 2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275, + 2300, 2325, 2350, 2375, 2400, 2425, 2450, 2475, +}; + +static int tps6586x_sm2_voltages[] = { + 3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350, + 3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750, + 3800, 3850, 3900, 3950, 4000, 4050, 4100, 4150, + 4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550, +}; + +static int tps6586x_dvm_voltages[] = { + 725, 750, 775, 800, 825, 850, 875, 900, + 925, 950, 975, 1000, 1025, 1050, 1075, 1100, + 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, + 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, +}; + +#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ +{ \ + .desc = { \ + .name = "REG-" #_id, \ + .ops = &tps6586x_regulator_##_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = TPS6586X_ID_##_id, \ + .n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \ + .owner = THIS_MODULE, \ + }, \ + .volt_reg = TPS6586X_##vreg, \ + .volt_shift = (shift), \ + .volt_nbits = (nbits), \ + .enable_reg[0] = TPS6586X_SUPPLY##ereg0, \ + .enable_bit[0] = (ebit0), \ + .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \ + .enable_bit[1] = (ebit1), \ + .voltages = tps6586x_##vdata##_voltages, \ +} + +#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1) \ + TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1, 0, 0) + +#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ + TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1, goreg, gobit) + +static struct tps6586x_regulator tps6586x_regulator[] = { + TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0), + TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), + TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), + TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), + TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6), + TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), + TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7), + TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), + TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1), + + TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), + TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), + TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), + TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), +}; + +/* + * TPS6586X has 2 enable bits that are OR'ed to determine the actual + * regulator state. Clearing one of this bits allows switching + * regulator on and of with single register write. + */ +static inline int tps6586x_regulator_preinit(struct device *parent, + struct tps6586x_regulator *ri) +{ + uint8_t val1, val2; + int ret; + + ret = tps6586x_read(parent, ri->enable_reg[0], &val1); + if (ret) + return ret; + + ret = tps6586x_read(parent, ri->enable_reg[1], &val2); + if (ret) + return ret; + + if (!(val2 & ri->enable_bit[1])) + return 0; + + /* + * The regulator is on, but it's enabled with the bit we don't + * want to use, so we switch the enable bits + */ + if (!(val1 & ri->enable_bit[0])) { + ret = tps6586x_set_bits(parent, ri->enable_reg[0], + 1 << ri->enable_bit[0]); + if (ret) + return ret; + } + + return tps6586x_clr_bits(parent, ri->enable_reg[1], + 1 << ri->enable_bit[1]); +} + +static inline struct tps6586x_regulator *find_regulator_info(int id) +{ + struct tps6586x_regulator *ri; + int i; + + for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) { + ri = &tps6586x_regulator[i]; + if (ri->desc.id == id) + return ri; + } + return NULL; +} + +static int __devinit tps6586x_regulator_probe(struct platform_device *pdev) +{ + struct tps6586x_regulator *ri = NULL; + struct regulator_dev *rdev; + int id = pdev->id; + int err; + + dev_dbg(&pdev->dev, "Probing reulator %d\n", id); + + ri = find_regulator_info(id); + if (ri == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + err = tps6586x_regulator_preinit(pdev->dev.parent, ri); + if (err) + return err; + + rdev = regulator_register(&ri->desc, &pdev->dev, + pdev->dev.platform_data, ri); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, rdev); + + return 0; +} + +static int __devexit tps6586x_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + return 0; +} + +static struct platform_driver tps6586x_regulator_driver = { + .driver = { + .name = "tps6586x-regulator", + .owner = THIS_MODULE, + }, + .probe = tps6586x_regulator_probe, + .remove = __devexit_p(tps6586x_regulator_remove), +}; + +static int __init tps6586x_regulator_init(void) +{ + return platform_driver_register(&tps6586x_regulator_driver); +} +subsys_initcall(tps6586x_regulator_init); + +static void __exit tps6586x_regulator_exit(void) +{ + platform_driver_unregister(&tps6586x_regulator_driver); +} +module_exit(tps6586x_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); +MODULE_DESCRIPTION("Regulator Driver for TI TPS6586X PMIC"); +MODULE_ALIAS("platform:tps6586x-regulator"); diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index e686cdb61b97..9edf8f692341 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -215,8 +215,7 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, case REGULATOR_MODE_IDLE: ret = wm831x_set_bits(wm831x, ctrl_reg, - WM831X_LDO1_LP_MODE, - WM831X_LDO1_LP_MODE); + WM831X_LDO1_LP_MODE, 0); if (ret < 0) return ret; @@ -225,10 +224,12 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, WM831X_LDO1_ON_MODE); if (ret < 0) return ret; + break; case REGULATOR_MODE_STANDBY: ret = wm831x_set_bits(wm831x, ctrl_reg, - WM831X_LDO1_LP_MODE, 0); + WM831X_LDO1_LP_MODE, + WM831X_LDO1_LP_MODE); if (ret < 0) return ret; diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 0e6ed7db9364..fe4b8a8a9dfd 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1129,7 +1129,7 @@ static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev) mode = REGULATOR_MODE_NORMAL; } else if (!active && !sleep) mode = REGULATOR_MODE_IDLE; - else if (!sleep) + else if (sleep) mode = REGULATOR_MODE_STANDBY; return mode; diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index 5a1dc8a24d35..03713bc66e4a 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -219,8 +219,6 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev) ldo->wm8994 = wm8994; - ldo->is_enabled = true; - if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) { ldo->enable = pdata->ldo[id].enable; @@ -237,7 +235,8 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev) ret); goto err_gpio; } - } + } else + ldo->is_enabled = true; ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev, pdata->ldo[id].init_data, ldo); |