summaryrefslogtreecommitdiff
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/Kconfig8
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/ab8500.c126
-rw-r--r--drivers/regulator/act8865-regulator.c349
-rw-r--r--drivers/regulator/anatop-regulator.c36
-rw-r--r--drivers/regulator/arizona-micsupp.c106
-rw-r--r--drivers/regulator/as3722-regulator.c36
-rw-r--r--drivers/regulator/core.c29
-rw-r--r--drivers/regulator/gpio-regulator.c7
-rw-r--r--drivers/regulator/pfuze100-regulator.c16
-rw-r--r--drivers/regulator/s2mps11.c2
-rw-r--r--drivers/regulator/s5m8767.c2
12 files changed, 507 insertions, 211 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ce785f481281..63bc1bab37e3 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -70,6 +70,14 @@ config REGULATOR_88PM8607
help
This driver supports 88PM8607 voltage regulator chips.
+config REGULATOR_ACT8865
+ tristate "Active-semi act8865 voltage regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver controls a active-semi act8865 voltage output
+ regulator via I2C bus.
+
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 01c597ea1744..3bb3a5591b95 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
+obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 603f192e84f1..c625468c7f2c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
}
}
-static int ab8500_regulator_init_registers(struct platform_device *pdev,
- int id, int mask, int value)
-{
- struct ab8500_reg_init *reg_init = abx500_regulator.init;
- int err;
-
- BUG_ON(value & ~mask);
- BUG_ON(mask & ~reg_init[id].mask);
-
- /* initialize register */
- err = abx500_mask_and_set_register_interruptible(
- &pdev->dev,
- reg_init[id].bank,
- reg_init[id].addr,
- mask, value);
- if (err < 0) {
- dev_err(&pdev->dev,
- "Failed to initialize 0x%02x, 0x%02x.\n",
- reg_init[id].bank,
- reg_init[id].addr);
- return err;
- }
- dev_vdbg(&pdev->dev,
- " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
- reg_init[id].bank,
- reg_init[id].addr,
- mask, value);
-
- return 0;
-}
-
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
int id, struct device_node *np)
@@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
- int err;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
@@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev,
}
/* register regulator with framework */
- info->regulator = regulator_register(&info->desc, &config);
+ info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
+ &config);
if (IS_ERR(info->regulator)) {
- err = PTR_ERR(info->regulator);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
- /* when we fail, un-register all earlier regulators */
- while (--id >= 0) {
- info = &abx500_regulator.info[id];
- regulator_unregister(info->regulator);
- }
- return err;
+ return PTR_ERR(info->regulator);
}
return 0;
@@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
- struct ab8500_platform_data *ppdata;
- struct ab8500_regulator_platform_data *pdata;
- int i, err;
+ int err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
@@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
abx500_get_regulator_info(ab8500);
- if (np) {
- err = of_regulator_match(&pdev->dev, np,
- abx500_regulator.match,
- abx500_regulator.match_size);
- if (err < 0) {
- dev_err(&pdev->dev,
- "Error parsing regulator init data: %d\n", err);
- return err;
- }
-
- err = ab8500_regulator_of_probe(pdev, np);
- return err;
- }
-
- ppdata = dev_get_platdata(ab8500->dev);
- if (!ppdata) {
- dev_err(&pdev->dev, "null parent pdata\n");
- return -EINVAL;
- }
-
- pdata = ppdata->regulator;
- if (!pdata) {
- dev_err(&pdev->dev, "null pdata\n");
- return -EINVAL;
- }
-
- /* make sure the platform data has the correct size */
- if (pdata->num_regulator != abx500_regulator.info_size) {
- dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
- return -EINVAL;
- }
-
- /* initialize debug (initial state is recorded with this call) */
- err = ab8500_regulator_debug_init(pdev);
- if (err)
+ err = of_regulator_match(&pdev->dev, np,
+ abx500_regulator.match,
+ abx500_regulator.match_size);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Error parsing regulator init data: %d\n", err);
return err;
-
- /* initialize registers */
- for (i = 0; i < pdata->num_reg_init; i++) {
- int id, mask, value;
-
- id = pdata->reg_init[i].id;
- mask = pdata->reg_init[i].mask;
- value = pdata->reg_init[i].value;
-
- /* check for configuration errors */
- BUG_ON(id >= abx500_regulator.init_size);
-
- err = ab8500_regulator_init_registers(pdev, id, mask, value);
- if (err < 0)
- return err;
}
-
- /* register all regulators */
- for (i = 0; i < abx500_regulator.info_size; i++) {
- err = ab8500_regulator_register(pdev, &pdata->regulator[i],
- i, NULL);
- if (err < 0)
- return err;
- }
-
- return 0;
+ return ab8500_regulator_of_probe(pdev, np);
}
static int ab8500_regulator_remove(struct platform_device *pdev)
{
- int i, err;
-
- for (i = 0; i < abx500_regulator.info_size; i++) {
- struct ab8500_regulator_info *info = NULL;
- info = &abx500_regulator.info[i];
-
- dev_vdbg(rdev_get_dev(info->regulator),
- "%s-remove\n", info->desc.name);
-
- regulator_unregister(info->regulator);
- }
+ int err;
/* remove regulator debug */
err = ab8500_regulator_debug_exit(pdev);
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
new file mode 100644
index 000000000000..084cc0819a52
--- /dev/null
+++ b/drivers/regulator/act8865-regulator.c
@@ -0,0 +1,349 @@
+/*
+ * act8865-regulator.c - Voltage regulation for the active-semi ACT8865
+ * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/act8865.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+/*
+ * ACT8865 Global Register Map.
+ */
+#define ACT8865_SYS_MODE 0x00
+#define ACT8865_SYS_CTRL 0x01
+#define ACT8865_DCDC1_VSET1 0x20
+#define ACT8865_DCDC1_VSET2 0x21
+#define ACT8865_DCDC1_CTRL 0x22
+#define ACT8865_DCDC2_VSET1 0x30
+#define ACT8865_DCDC2_VSET2 0x31
+#define ACT8865_DCDC2_CTRL 0x32
+#define ACT8865_DCDC3_VSET1 0x40
+#define ACT8865_DCDC3_VSET2 0x41
+#define ACT8865_DCDC3_CTRL 0x42
+#define ACT8865_LDO1_VSET 0x50
+#define ACT8865_LDO1_CTRL 0x51
+#define ACT8865_LDO2_VSET 0x54
+#define ACT8865_LDO2_CTRL 0x55
+#define ACT8865_LDO3_VSET 0x60
+#define ACT8865_LDO3_CTRL 0x61
+#define ACT8865_LDO4_VSET 0x64
+#define ACT8865_LDO4_CTRL 0x65
+
+/*
+ * Field Definitions.
+ */
+#define ACT8865_ENA 0x80 /* ON - [7] */
+#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
+
+/*
+ * ACT8865 voltage number
+ */
+#define ACT8865_VOLTAGE_NUM 64
+
+struct act8865 {
+ struct regulator_dev *rdev[ACT8865_REG_NUM];
+ struct regmap *regmap;
+};
+
+static const struct regmap_config act8865_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct regulator_linear_range act8865_volatge_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+ REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+ REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8865_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_desc act8865_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .id = ACT8865_ID_DCDC1,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_DCDC1_VSET1,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_DCDC1_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "DCDC_REG2",
+ .id = ACT8865_ID_DCDC2,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_DCDC2_VSET1,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_DCDC2_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "DCDC_REG3",
+ .id = ACT8865_ID_DCDC3,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_DCDC3_VSET1,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_DCDC3_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO_REG1",
+ .id = ACT8865_ID_LDO1,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_LDO1_VSET,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_LDO1_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO_REG2",
+ .id = ACT8865_ID_LDO2,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_LDO2_VSET,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_LDO2_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO_REG3",
+ .id = ACT8865_ID_LDO3,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_LDO3_VSET,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_LDO3_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO_REG4",
+ .id = ACT8865_ID_LDO4,
+ .ops = &act8865_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = ACT8865_VOLTAGE_NUM,
+ .linear_ranges = act8865_volatge_ranges,
+ .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+ .vsel_reg = ACT8865_LDO4_VSET,
+ .vsel_mask = ACT8865_VSEL_MASK,
+ .enable_reg = ACT8865_LDO4_CTRL,
+ .enable_mask = ACT8865_ENA,
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id act8865_dt_ids[] = {
+ { .compatible = "active-semi,act8865" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, act8865_dt_ids);
+
+static struct of_regulator_match act8865_matches[] = {
+ [ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
+ [ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
+ [ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
+ [ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
+ [ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
+ [ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
+ [ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
+};
+
+static int act8865_pdata_from_dt(struct device *dev,
+ struct device_node **of_node,
+ struct act8865_platform_data *pdata)
+{
+ int matched, i;
+ struct device_node *np;
+ struct act8865_regulator_data *regulator;
+
+ np = of_find_node_by_name(dev->of_node, "regulators");
+ if (!np) {
+ dev_err(dev, "missing 'regulators' subnode in DT\n");
+ return -EINVAL;
+ }
+
+ matched = of_regulator_match(dev, np,
+ act8865_matches, ARRAY_SIZE(act8865_matches));
+ if (matched <= 0)
+ return matched;
+
+ pdata->regulators = devm_kzalloc(dev,
+ sizeof(struct act8865_regulator_data) *
+ ARRAY_SIZE(act8865_matches), GFP_KERNEL);
+ if (!pdata->regulators) {
+ dev_err(dev, "%s: failed to allocate act8865 registor\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ pdata->num_regulators = matched;
+ regulator = pdata->regulators;
+
+ for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
+ regulator->id = i;
+ regulator->name = act8865_matches[i].name;
+ regulator->platform_data = act8865_matches[i].init_data;
+ of_node[i] = act8865_matches[i].of_node;
+ regulator++;
+ }
+
+ return 0;
+}
+#else
+static inline int act8865_pdata_from_dt(struct device *dev,
+ struct device_node **of_node,
+ struct act8865_platform_data *pdata)
+{
+ return 0;
+}
+#endif
+
+static int act8865_pmic_probe(struct i2c_client *client,
+ const struct i2c_device_id *i2c_id)
+{
+ struct regulator_dev **rdev;
+ struct device *dev = &client->dev;
+ struct act8865_platform_data *pdata = dev_get_platdata(dev);
+ struct regulator_config config = { };
+ struct act8865 *act8865;
+ struct device_node *of_node[ACT8865_REG_NUM];
+ int i, id;
+ int ret = -EINVAL;
+ int error;
+
+ if (dev->of_node && !pdata) {
+ const struct of_device_id *id;
+ struct act8865_platform_data pdata_of;
+
+ id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
+ if (!id)
+ return -ENODEV;
+
+ ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
+ if (ret < 0)
+ return ret;
+
+ pdata = &pdata_of;
+ }
+
+ if (pdata->num_regulators > ACT8865_REG_NUM) {
+ dev_err(dev, "Too many regulators found!\n");
+ return -EINVAL;
+ }
+
+ act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
+ if (!act8865)
+ return -ENOMEM;
+
+ rdev = act8865->rdev;
+
+ act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
+ if (IS_ERR(act8865->regmap)) {
+ error = PTR_ERR(act8865->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ error);
+ return error;
+ }
+
+ /* Finally register devices */
+ for (i = 0; i < ACT8865_REG_NUM; i++) {
+
+ id = pdata->regulators[i].id;
+
+ config.dev = dev;
+ config.init_data = pdata->regulators[i].platform_data;
+ config.of_node = of_node[i];
+ config.driver_data = act8865;
+ config.regmap = act8865->regmap;
+
+ rdev[i] = devm_regulator_register(&client->dev,
+ &act8865_reg[i], &config);
+ if (IS_ERR(rdev[i])) {
+ dev_err(dev, "failed to register %s\n",
+ act8865_reg[id].name);
+ return PTR_ERR(rdev[i]);
+ }
+ }
+
+ i2c_set_clientdata(client, act8865);
+
+ return 0;
+}
+
+static const struct i2c_device_id act8865_ids[] = {
+ { "act8865", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, act8865_ids);
+
+static struct i2c_driver act8865_pmic_driver = {
+ .driver = {
+ .name = "act8865",
+ .owner = THIS_MODULE,
+ },
+ .probe = act8865_pmic_probe,
+ .id_table = act8865_ids,
+};
+
+module_i2c_driver(act8865_pmic_driver);
+
+MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index c734d0980826..862e63e451d0 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -122,10 +122,8 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (!sreg)
return -ENOMEM;
sreg->initdata = initdata;
- sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
- GFP_KERNEL);
+ sreg->name = of_get_property(np, "regulator-name", NULL);
rdesc = &sreg->rdesc;
- memset(rdesc, 0, sizeof(*rdesc));
rdesc->name = sreg->name;
rdesc->ops = &anatop_rops;
rdesc->type = REGULATOR_VOLTAGE;
@@ -143,37 +141,37 @@ static int anatop_regulator_probe(struct platform_device *pdev)
&sreg->control_reg);
if (ret) {
dev_err(dev, "no anatop-reg-offset property set\n");
- goto anatop_probe_end;
+ return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-width",
&sreg->vol_bit_width);
if (ret) {
dev_err(dev, "no anatop-vol-bit-width property set\n");
- goto anatop_probe_end;
+ return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-shift",
&sreg->vol_bit_shift);
if (ret) {
dev_err(dev, "no anatop-vol-bit-shift property set\n");
- goto anatop_probe_end;
+ return ret;
}
ret = of_property_read_u32(np, "anatop-min-bit-val",
&sreg->min_bit_val);
if (ret) {
dev_err(dev, "no anatop-min-bit-val property set\n");
- goto anatop_probe_end;
+ return ret;
}
ret = of_property_read_u32(np, "anatop-min-voltage",
&sreg->min_voltage);
if (ret) {
dev_err(dev, "no anatop-min-voltage property set\n");
- goto anatop_probe_end;
+ return ret;
}
ret = of_property_read_u32(np, "anatop-max-voltage",
&sreg->max_voltage);
if (ret) {
dev_err(dev, "no anatop-max-voltage property set\n");
- goto anatop_probe_end;
+ return ret;
}
/* read LDO ramp up setting, only for core reg */
@@ -204,27 +202,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (IS_ERR(rdev)) {
dev_err(dev, "failed to register %s\n",
rdesc->name);
- ret = PTR_ERR(rdev);
- goto anatop_probe_end;
+ return PTR_ERR(rdev);
}
platform_set_drvdata(pdev, rdev);
-anatop_probe_end:
- if (ret)
- kfree(sreg->name);
-
- return ret;
-}
-
-static int anatop_regulator_remove(struct platform_device *pdev)
-{
- struct regulator_dev *rdev = platform_get_drvdata(pdev);
- struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
- const char *name = sreg->name;
-
- kfree(name);
-
return 0;
}
@@ -240,7 +222,6 @@ static struct platform_driver anatop_regulator_driver = {
.of_match_table = of_anatop_regulator_match_tbl,
},
.probe = anatop_regulator_probe,
- .remove = anatop_regulator_remove,
};
static int __init anatop_regulator_init(void)
@@ -259,3 +240,4 @@ MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
MODULE_DESCRIPTION("ANATOP Regulator driver");
MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:anatop_regulator");
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 724706a97dc4..034ece707083 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -28,8 +28,6 @@
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
-#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
-
struct arizona_micsupp {
struct regulator_dev *regulator;
struct arizona *arizona;
@@ -40,42 +38,6 @@ struct arizona_micsupp {
struct work_struct check_cp_work;
};
-static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
- return -EINVAL;
-
- if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
- return 3300000;
- else
- return (selector * 50000) + 1700000;
-}
-
-static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- unsigned int voltage;
- int selector;
-
- if (min_uV < 1700000)
- min_uV = 1700000;
-
- if (min_uV > 3200000)
- selector = ARIZONA_MICSUPP_MAX_SELECTOR;
- else
- selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
-
- if (selector < 0)
- return -EINVAL;
-
- voltage = arizona_micsupp_list_voltage(rdev, selector);
- if (voltage < min_uV || voltage > max_uV)
- return -EINVAL;
-
- return selector;
-}
-
static void arizona_micsupp_check_cp(struct work_struct *work)
{
struct arizona_micsupp *micsupp =
@@ -145,8 +107,8 @@ static struct regulator_ops arizona_micsupp_ops = {
.disable = arizona_micsupp_disable,
.is_enabled = regulator_is_enabled_regmap,
- .list_voltage = arizona_micsupp_list_voltage,
- .map_voltage = arizona_micsupp_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -155,11 +117,43 @@ static struct regulator_ops arizona_micsupp_ops = {
.set_bypass = arizona_micsupp_set_bypass,
};
+static const struct regulator_linear_range arizona_micsupp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000),
+ REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
+};
+
static const struct regulator_desc arizona_micsupp = {
.name = "MICVDD",
.supply_name = "CPVDD",
.type = REGULATOR_VOLTAGE,
- .n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
+ .n_voltages = 32,
+ .ops = &arizona_micsupp_ops,
+
+ .vsel_reg = ARIZONA_LDO2_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+ .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .enable_mask = ARIZONA_CPMIC_ENA,
+ .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+ .linear_ranges = arizona_micsupp_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ranges),
+
+ .enable_time = 3000,
+
+ .owner = THIS_MODULE,
+};
+
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+ .name = "MICVDD",
+ .supply_name = "CPVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 40,
.ops = &arizona_micsupp_ops,
.vsel_reg = ARIZONA_LDO2_CONTROL_1,
@@ -169,6 +163,9 @@ static const struct regulator_desc arizona_micsupp = {
.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.bypass_mask = ARIZONA_CPMIC_BYPASS,
+ .linear_ranges = arizona_micsupp_ext_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
.enable_time = 3000,
.owner = THIS_MODULE,
@@ -186,9 +183,22 @@ static const struct regulator_init_data arizona_micsupp_default = {
.num_consumer_supplies = 1,
};
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ },
+
+ .num_consumer_supplies = 1,
+};
+
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
@@ -207,7 +217,17 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
* default init_data for it. This will be overridden with
* platform data if provided.
*/
- micsupp->init_data = arizona_micsupp_default;
+ switch (arizona->type) {
+ case WM5110:
+ desc = &arizona_micsupp_ext;
+ micsupp->init_data = arizona_micsupp_ext_default;
+ break;
+ default:
+ desc = &arizona_micsupp;
+ micsupp->init_data = arizona_micsupp_default;
+ break;
+ }
+
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -226,7 +246,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
- &arizona_micsupp,
+ desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
index 5917fe3dc983..8b17d786cb71 100644
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@@ -99,7 +99,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
.control_reg = AS3722_SD0_CONTROL_REG,
.mode_mask = AS3722_SD0_MODE_FAST,
- .n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD1,
@@ -112,7 +111,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
.control_reg = AS3722_SD1_CONTROL_REG,
.mode_mask = AS3722_SD1_MODE_FAST,
- .n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD2,
@@ -181,7 +179,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
.control_reg = AS3722_SD6_CONTROL_REG,
.mode_mask = AS3722_SD6_MODE_FAST,
- .n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_LDO0,
@@ -590,11 +587,27 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev,
default:
return -EINVAL;
}
+ ret <<= ffs(mask) - 1;
val = ret & mask;
- val <<= ffs(mask) - 1;
return as3722_update_bits(as3722, reg, mask, val);
}
+static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
+{
+ int err;
+ unsigned val;
+
+ err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val);
+ if (err < 0) {
+ dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+ AS3722_FUSE7_REG, err);
+ return false;
+ }
+ if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE)
+ return true;
+ return false;
+}
+
static const struct regulator_linear_range as3722_sd2345_ranges[] = {
REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
@@ -820,9 +833,19 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_sd016_extcntrl_ops;
else
ops = &as3722_sd016_ops;
- as3722_regs->desc[id].min_uV = 610000;
+ if (id == AS3722_REGULATOR_ID_SD0 &&
+ as3722_sd0_is_low_voltage(as3722_regs)) {
+ as3722_regs->desc[id].n_voltages =
+ AS3722_SD0_VSEL_LOW_VOL_MAX + 1;
+ as3722_regs->desc[id].min_uV = 410000;
+ } else {
+ as3722_regs->desc[id].n_voltages =
+ AS3722_SD0_VSEL_MAX + 1,
+ as3722_regs->desc[id].min_uV = 610000;
+ }
as3722_regs->desc[id].uV_step = 10000;
as3722_regs->desc[id].linear_min_sel = 1;
+ as3722_regs->desc[id].enable_time = 600;
break;
case AS3722_REGULATOR_ID_SD2:
case AS3722_REGULATOR_ID_SD3:
@@ -842,9 +865,6 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_ldo_extcntrl_ops;
else
ops = &as3722_ldo_ops;
- as3722_regs->desc[id].min_uV = 825000;
- as3722_regs->desc[id].uV_step = 25000;
- as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 500;
as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
as3722_regs->desc[id].n_linear_ranges =
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6382f0af353b..b38a6b669e8c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -119,6 +119,11 @@ static const char *rdev_get_name(struct regulator_dev *rdev)
return "";
}
+static bool have_full_constraints(void)
+{
+ return has_full_constraints || of_have_populated_dt();
+}
+
/**
* of_get_regulator - get a regulator device node based on supply name
* @dev: Device pointer for the consumer (of regulator) device
@@ -1329,9 +1334,8 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
* If we have return value from dev_lookup fail, we do not expect to
* succeed, so, quit with appropriate error value
*/
- if (ret && ret != -ENODEV) {
+ if (ret && ret != -ENODEV)
goto out;
- }
if (!devname)
devname = "deviceless";
@@ -1340,13 +1344,14 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
* Assume that a regulator is physically present and enabled
* even if it isn't hooked up and just provide a dummy.
*/
- if (has_full_constraints && allow_dummy) {
+ if (have_full_constraints() && allow_dummy) {
pr_warn("%s supply %s not found, using dummy regulator\n",
devname, id);
rdev = dummy_regulator_rdev;
goto found;
- } else {
+ /* Don't log an error when called from regulator_get_optional() */
+ } else if (!have_full_constraints() || exclusive) {
dev_err(dev, "dummy supplies not allowed\n");
}
@@ -2184,6 +2189,9 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector)
struct regulator_ops *ops = rdev->desc->ops;
int ret;
+ if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+ return rdev->desc->fixed_uV;
+
if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
return -EINVAL;
@@ -2236,7 +2244,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
- return (min_uV <= ret && ret <= max_uV);
+ return min_uV <= ret && ret <= max_uV;
else
return ret;
}
@@ -2408,7 +2416,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
if (ret < 0)
goto out;
-
+
/* restore original values in case of error */
old_min_uV = regulator->min_uV;
old_max_uV = regulator->max_uV;
@@ -2422,7 +2430,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
if (ret < 0)
goto out2;
-
+
out:
mutex_unlock(&rdev->mutex);
return ret;
@@ -3624,7 +3632,7 @@ int regulator_suspend_finish(void)
if (error)
ret = error;
} else {
- if (!has_full_constraints)
+ if (!have_full_constraints())
goto unlock;
if (!ops->disable)
goto unlock;
@@ -3822,14 +3830,13 @@ static int __init regulator_init_complete(void)
if (!enabled)
goto unlock;
- if (has_full_constraints) {
+ if (have_full_constraints()) {
/* We log since this may kill the system if it
* goes wrong. */
rdev_info(rdev, "disabling\n");
ret = ops->disable(rdev);
- if (ret != 0) {
+ if (ret != 0)
rdev_err(rdev, "couldn't disable: %d\n", ret);
- }
} else {
/* The intention is that in future we will
* assume that full constraints are provided
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 04406a918c04..234960dc9607 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -139,6 +139,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
struct property *prop;
const char *regtype;
int proplen, gpio, i;
+ int ret;
config = devm_kzalloc(dev,
sizeof(struct gpio_regulator_config),
@@ -202,7 +203,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
}
config->nr_states = i;
- of_property_read_string(np, "regulator-type", &regtype);
+ ret = of_property_read_string(np, "regulator-type", &regtype);
+ if (ret < 0) {
+ dev_err(dev, "Missing 'regulator-type' property\n");
+ return ERR_PTR(-EINVAL);
+ }
if (!strncmp("voltage", regtype, 7))
config->type = REGULATOR_VOLTAGE;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index ba67b2c4e2e7..c31e0485de25 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -38,7 +38,7 @@
#define PFUZE100_DEVICEID 0x0
#define PFUZE100_REVID 0x3
-#define PFUZE100_FABID 0x3
+#define PFUZE100_FABID 0x4
#define PFUZE100_SW1ABVOL 0x20
#define PFUZE100_SW1CVOL 0x2e
@@ -308,16 +308,22 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
if (ret)
return ret;
- if (value & 0x0f) {
- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
- return -ENODEV;
+ switch (value & 0x0f) {
+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
+ case 0x8:
+ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+ case 0x0:
+ break;
+ default:
+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+ return -ENODEV;
}
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
if (ret)
return ret;
dev_info(pfuze_chip->dev,
- "Full lay: %x, Metal lay: %x\n",
+ "Full layer: %x, Metal layer: %x\n",
(value & 0xf0) >> 4, value & 0x0f);
ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 333677d68d0e..9e61922d8230 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -438,7 +438,7 @@ common_reg:
platform_set_drvdata(pdev, s2mps11);
config.dev = &pdev->dev;
- config.regmap = iodev->regmap;
+ config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
if (!reg_np) {
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index cbf91e25cf7f..aeb40aad0ae7 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -925,7 +925,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
- config.regmap = iodev->regmap;
+ config.regmap = iodev->regmap_pmic;
config.of_node = pdata->regulators[i].reg_node;
rdev[i] = devm_regulator_register(&pdev->dev, &regulators[id],
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 13:16:12 +0000