diff options
Diffstat (limited to 'drivers/rtc/rtc-fm3130.c')
| -rw-r--r-- | drivers/rtc/rtc-fm3130.c | 501 |
1 files changed, 501 insertions, 0 deletions
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 000000000000..11644c8fca82 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/rtc.h> +#include <linux/bcd.h> + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>"); +MODULE_LICENSE("GPL"); + |