diff options
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/Kconfig | 19 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
-rw-r--r-- | drivers/rtc/interface.c | 102 | ||||
-rw-r--r-- | drivers/rtc/rtc-at32ap700x.c | 3 | ||||
-rw-r--r-- | drivers/rtc/rtc-at91rm9200.c | 4 | ||||
-rw-r--r-- | drivers/rtc/rtc-at91sam9.c | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-dev.c | 12 | ||||
-rw-r--r-- | drivers/rtc/rtc-fm3130.c | 2 | ||||
-rw-r--r-- | drivers/rtc/rtc-m41t80.c | 7 | ||||
-rw-r--r-- | drivers/rtc/rtc-omap.c | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-pcf8563.c | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-pl030.c | 217 | ||||
-rw-r--r-- | drivers/rtc/rtc-pl031.c | 36 | ||||
-rw-r--r-- | drivers/rtc/rtc-s3c.c | 4 | ||||
-rw-r--r-- | drivers/rtc/rtc-sa1100.c | 37 | ||||
-rw-r--r-- | drivers/rtc/rtc-x1205.c | 111 |
16 files changed, 486 insertions, 72 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 4949dc4859be..fc85bf2e4a97 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -469,6 +469,16 @@ config RTC_DRV_VR41XX To compile this driver as a module, choose M here: the module will be called rtc-vr41xx. +config RTC_DRV_PL030 + tristate "ARM AMBA PL030 RTC" + depends on ARM_AMBA + help + If you say Y here you will get access to ARM AMBA + PrimeCell PL030 RTC found on certain ARM SOCs. + + To compile this driver as a module, choose M here: the + module will be called rtc-pl030. + config RTC_DRV_PL031 tristate "ARM AMBA PL031 RTC" depends on ARM_AMBA @@ -495,12 +505,13 @@ config RTC_DRV_AT91RM9200 this is powered by the backup power supply. config RTC_DRV_AT91SAM9 - tristate "AT91SAM9x" + tristate "AT91SAM9x/AT91CAP9" depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) help - RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer). - These timers are powered by the backup power supply (such as a - small coin cell battery), but do not need to be used as RTCs. + RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT + (Real Time Timer). These timers are powered by the backup power + supply (such as a small coin cell battery), but do not need to + be used as RTCs. (On AT91SAM9rl chips you probably want to use the dedicated RTC module and leave the RTT available for other uses.) diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index b6e14d51670b..b5d9d67df887 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o +obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7e3ad4f3b343..58b7336640ff 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) int err; struct rtc_time before, now; int first_time = 1; + unsigned long t_now, t_alm; + enum { none, day, month, year } missing = none; + unsigned days; - /* The lower level RTC driver may not be capable of filling - * in all fields of the rtc_time struct (eg. rtc-cmos), - * and so might instead return -1 in some fields. - * We deal with that here by grabbing a current RTC timestamp - * and using values from that for any missing (-1) values. + /* The lower level RTC driver may return -1 in some fields, + * creating invalid alarm->time values, for reasons like: + * + * - The hardware may not be capable of filling them in; + * many alarms match only on time-of-day fields, not + * day/month/year calendar data. + * + * - Some hardware uses illegal values as "wildcard" match + * values, which non-Linux firmware (like a BIOS) may try + * to set up as e.g. "alarm 15 minutes after each hour". + * Linux uses only oneshot alarms. + * + * When we see that here, we deal with it by using values from + * a current RTC timestamp for any missing (-1) values. The + * RTC driver prevents "periodic alarm" modes. * * But this can be racey, because some fields of the RTC timestamp * may have wrapped in the interval since we read the RTC alarm, @@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) if (!alarm->enabled) return 0; + /* full-function RTCs won't have such missing fields */ + if (rtc_valid_tm(&alarm->time) == 0) + return 0; + /* get the "after" timestamp, to detect wrapped fields */ err = rtc_read_time(rtc, &now); if (err < 0) @@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } while ( before.tm_min != now.tm_min || before.tm_hour != now.tm_hour || before.tm_mon != now.tm_mon - || before.tm_year != now.tm_year - || before.tm_isdst != now.tm_isdst); + || before.tm_year != now.tm_year); - /* Fill in any missing alarm fields using the timestamp */ + /* Fill in the missing alarm fields using the timestamp; we + * know there's at least one since alarm->time is invalid. + */ if (alarm->time.tm_sec == -1) alarm->time.tm_sec = now.tm_sec; if (alarm->time.tm_min == -1) alarm->time.tm_min = now.tm_min; if (alarm->time.tm_hour == -1) alarm->time.tm_hour = now.tm_hour; - if (alarm->time.tm_mday == -1) + + /* For simplicity, only support date rollover for now */ + if (alarm->time.tm_mday == -1) { alarm->time.tm_mday = now.tm_mday; - if (alarm->time.tm_mon == -1) + missing = day; + } + if (alarm->time.tm_mon == -1) { alarm->time.tm_mon = now.tm_mon; - if (alarm->time.tm_year == -1) + if (missing == none) + missing = month; + } + if (alarm->time.tm_year == -1) { alarm->time.tm_year = now.tm_year; + if (missing == none) + missing = year; + } + + /* with luck, no rollover is needed */ + rtc_tm_to_time(&now, &t_now); + rtc_tm_to_time(&alarm->time, &t_alm); + if (t_now < t_alm) + goto done; + + switch (missing) { + + /* 24 hour rollover ... if it's now 10am Monday, an alarm that + * that will trigger at 5am will do so at 5am Tuesday, which + * could also be in the next month or year. This is a common + * case, especially for PCs. + */ + case day: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day"); + t_alm += 24 * 60 * 60; + rtc_time_to_tm(t_alm, &alarm->time); + break; + + /* Month rollover ... if it's the 31th, an alarm on the 3rd will + * be next month. An alarm matching on the 30th, 29th, or 28th + * may end up in the month after that! Many newer PCs support + * this type of alarm. + */ + case month: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month"); + do { + if (alarm->time.tm_mon < 11) + alarm->time.tm_mon++; + else { + alarm->time.tm_mon = 0; + alarm->time.tm_year++; + } + days = rtc_month_days(alarm->time.tm_mon, + alarm->time.tm_year); + } while (days < alarm->time.tm_mday); + break; + + /* Year rollover ... easy except for leap years! */ + case year: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); + do { + alarm->time.tm_year++; + } while (!rtc_valid_tm(&alarm->time)); + break; + + default: + dev_warn(&rtc->dev, "alarm rollover not handled\n"); + } + +done: return 0; } EXPORT_SYMBOL_GPL(rtc_read_alarm); diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 2ef8cdfda4a7..90b9a6503e15 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -265,6 +265,7 @@ static int __init at32_rtc_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rtc); + device_init_wakeup(&pdev->dev, 1); dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n", (unsigned long)rtc->regs, rtc->irq); @@ -284,6 +285,8 @@ static int __exit at32_rtc_remove(struct platform_device *pdev) { struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev); + device_init_wakeup(&pdev->dev, 0); + free_irq(rtc->irq, rtc); iounmap(rtc->regs); rtc_device_unregister(rtc->rtc); diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 39e64ab1ecb7..9c3db934cc24 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -29,10 +29,6 @@ #include <linux/completion.h> #include <asm/uaccess.h> -#include <asm/rtc.h> - -#include <asm/mach/time.h> - #include <asm/arch/at91_rtc.h> diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 38d8742a4bdf..f0246ef413a4 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -19,7 +19,6 @@ #include <linux/interrupt.h> #include <linux/ioctl.h> -#include <asm/mach/time.h> #include <asm/arch/board.h> #include <asm/arch/at91_rtt.h> diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 90dfa0df747a..0114a78b7cbb 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/rtc.h> +#include <linux/smp_lock.h> #include "rtc-core.h" static dev_t rtc_devt; @@ -26,8 +27,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file) struct rtc_device, char_dev); const struct rtc_class_ops *ops = rtc->ops; - if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) - return -EBUSY; + lock_kernel(); + if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) { + err = -EBUSY; + goto out; + } file->private_data = rtc; @@ -37,11 +41,13 @@ static int rtc_dev_open(struct inode *inode, struct file *file) rtc->irq_data = 0; spin_unlock_irq(&rtc->irq_lock); - return 0; + goto out; } /* something has gone wrong */ clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); +out: + unlock_kernel(); return err; } diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 11644c8fca82..abfdfcbaa059 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -55,7 +55,7 @@ struct fm3130 { int alarm; }; static const struct i2c_device_id fm3130_id[] = { - { "fm3130-rtc", 0 }, + { "fm3130", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, fm3130_id); diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index a3e0880b38fb..0a19c06019be 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/i2c.h> #include <linux/rtc.h> @@ -655,12 +656,16 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int wdt_open(struct inode *inode, struct file *file) { if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { - if (test_and_set_bit(0, &wdt_is_open)) + lock_kernel(); + if (test_and_set_bit(0, &wdt_is_open)) { + unlock_kernel(); return -EBUSY; + } /* * Activate */ wdt_is_open = 1; + unlock_kernel(); return 0; } return -ENODEV; diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 58f81c774943..eb23d8423f42 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <asm/io.h> -#include <asm/mach/time.h> /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 0fc4c3630780..748a502a6355 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -302,6 +302,7 @@ static int pcf8563_remove(struct i2c_client *client) static const struct i2c_device_id pcf8563_id[] = { { "pcf8563", 0 }, + { "rtc8564", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf8563_id); diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c new file mode 100644 index 000000000000..8448eeb9d675 --- /dev/null +++ b/drivers/rtc/rtc-pl030.c @@ -0,0 +1,217 @@ +/* + * linux/drivers/rtc/rtc-pl030.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/rtc.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#define RTC_DR (0) +#define RTC_MR (4) +#define RTC_STAT (8) +#define RTC_EOI (8) +#define RTC_LR (12) +#define RTC_CR (16) +#define RTC_CR_MIE (1 << 0) + +struct pl030_rtc { + struct rtc_device *rtc; + void __iomem *base; +}; + +static irqreturn_t pl030_interrupt(int irq, void *dev_id) +{ + struct pl030_rtc *rtc = dev_id; + writel(0, rtc->base + RTC_EOI); + return IRQ_HANDLED; +} + +static int pl030_open(struct device *dev) +{ + return 0; +} + +static void pl030_release(struct device *dev) +{ +} + +static int pl030_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + + rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time); + return 0; +} + +static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + unsigned long time; + int ret; + + /* + * At the moment, we can only deal with non-wildcarded alarm times. + */ + ret = rtc_valid_tm(&alrm->time); + if (ret == 0) + ret = rtc_tm_to_time(&alrm->time, &time); + if (ret == 0) + writel(time, rtc->base + RTC_MR); + return ret; +} + +static int pl030_read_time(struct device *dev, struct rtc_time *tm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + + rtc_time_to_tm(readl(rtc->base + RTC_DR), tm); + + return 0; +} + +/* + * Set the RTC time. Unfortunately, we can't accurately set + * the point at which the counter updates. + * + * Also, since RTC_LR is transferred to RTC_CR on next rising + * edge of the 1Hz clock, we must write the time one second + * in advance. + */ +static int pl030_set_time(struct device *dev, struct rtc_time *tm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + unsigned long time; + int ret; + + ret = rtc_tm_to_time(tm, &time); + if (ret == 0) + writel(time + 1, rtc->base + RTC_LR); + + return ret; +} + +static const struct rtc_class_ops pl030_ops = { + .open = pl030_open, + .release = pl030_release, + .ioctl = pl030_ioctl, + .read_time = pl030_read_time, + .set_time = pl030_set_time, + .read_alarm = pl030_read_alarm, + .set_alarm = pl030_set_alarm, +}; + +static int pl030_probe(struct amba_device *dev, void *id) +{ + struct pl030_rtc *rtc; + int ret; + + ret = amba_request_regions(dev, NULL); + if (ret) + goto err_req; + + rtc = kmalloc(sizeof(*rtc), GFP_KERNEL); + if (!rtc) { + ret = -ENOMEM; + goto err_rtc; + } + + rtc->base = ioremap(dev->res.start, SZ_4K); + if (!rtc->base) { + ret = -ENOMEM; + goto err_map; + } + + __raw_writel(0, rtc->base + RTC_CR); + __raw_writel(0, rtc->base + RTC_EOI); + + amba_set_drvdata(dev, rtc); + + ret = request_irq(dev->irq[0], pl030_interrupt, IRQF_DISABLED, + "rtc-pl030", rtc); + if (ret) + goto err_irq; + + rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops, + THIS_MODULE); + if (IS_ERR(rtc->rtc)) { + ret = PTR_ERR(rtc->rtc); + goto err_reg; + } + + return 0; + + err_reg: + free_irq(dev->irq[0], rtc); + err_irq: + iounmap(rtc->base); + err_map: + kfree(rtc); + err_rtc: + amba_release_regions(dev); + err_req: + return ret; +} + +static int pl030_remove(struct amba_device *dev) +{ + struct pl030_rtc *rtc = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + writel(0, rtc->base + RTC_CR); + + free_irq(dev->irq[0], rtc); + rtc_device_unregister(rtc->rtc); + iounmap(rtc->base); + kfree(rtc); + amba_release_regions(dev); + + return 0; +} + +static struct amba_id pl030_ids[] = { + { + .id = 0x00041030, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl030_driver = { + .drv = { + .name = "rtc-pl030", + }, + .probe = pl030_probe, + .remove = pl030_remove, + .id_table = pl030_ids, +}; + +static int __init pl030_init(void) +{ + return amba_driver_register(&pl030_driver); +} + +static void __exit pl030_exit(void) +{ + amba_driver_unregister(&pl030_driver); +} + +module_init(pl030_init); +module_exit(pl030_exit); + +MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); +MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 2fd49edcc712..08b4610ec5a6 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -12,23 +12,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - -#include <linux/platform_device.h> #include <linux/module.h> #include <linux/rtc.h> #include <linux/init.h> -#include <linux/fs.h> #include <linux/interrupt.h> -#include <linux/string.h> -#include <linux/pm.h> -#include <linux/bitops.h> - #include <linux/amba/bus.h> - -#include <asm/io.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/rtc.h> +#include <linux/io.h> /* * Register definitions @@ -142,13 +131,12 @@ static int pl031_remove(struct amba_device *adev) { struct pl031_local *ldata = dev_get_drvdata(&adev->dev); - if (ldata) { - dev_set_drvdata(&adev->dev, NULL); - free_irq(adev->irq[0], ldata->rtc); - rtc_device_unregister(ldata->rtc); - iounmap(ldata->base); - kfree(ldata); - } + amba_set_drvdata(adev, NULL); + free_irq(adev->irq[0], ldata->rtc); + rtc_device_unregister(ldata->rtc); + iounmap(ldata->base); + kfree(ldata); + amba_release_regions(adev); return 0; } @@ -158,13 +146,15 @@ static int pl031_probe(struct amba_device *adev, void *id) int ret; struct pl031_local *ldata; + ret = amba_request_regions(adev, NULL); + if (ret) + goto err_req; ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL); if (!ldata) { ret = -ENOMEM; goto out; } - dev_set_drvdata(&adev->dev, ldata); ldata->base = ioremap(adev->res.start, adev->res.end - adev->res.start + 1); @@ -173,6 +163,8 @@ static int pl031_probe(struct amba_device *adev, void *id) goto out_no_remap; } + amba_set_drvdata(adev, ldata); + if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED, "rtc-pl031", ldata->rtc)) { ret = -EIO; @@ -192,10 +184,12 @@ out_no_rtc: free_irq(adev->irq[0], ldata->rtc); out_no_irq: iounmap(ldata->base); + amba_set_drvdata(adev, NULL); out_no_remap: - dev_set_drvdata(&adev->dev, NULL); kfree(ldata); out: + amba_release_regions(adev); +err_req: return ret; } diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index f26e0cad8f16..fed86e507fdf 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -26,10 +26,6 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/rtc.h> - -#include <asm/mach/time.h> - #include <asm/plat-s3c/regs-rtc.h> /* I have yet to find an S3C implementation with more than one diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 67421b0d3a7b..f47294c60148 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -33,7 +33,6 @@ #include <asm/hardware.h> #include <asm/irq.h> -#include <asm/rtc.h> #ifdef CONFIG_ARCH_PXA #include <asm/arch/pxa-regs.h> @@ -47,6 +46,42 @@ static unsigned long rtc_freq = 1024; static struct rtc_time rtc_alarm; static DEFINE_SPINLOCK(sa1100_rtc_lock); +static inline int rtc_periodic_alarm(struct rtc_time *tm) +{ + return (tm->tm_year == -1) || + ((unsigned)tm->tm_mon >= 12) || + ((unsigned)(tm->tm_mday - 1) >= 31) || + ((unsigned)tm->tm_hour > 23) || + ((unsigned)tm->tm_min > 59) || + ((unsigned)tm->tm_sec > 59); +} + +/* + * Calculate the next alarm time given the requested alarm time mask + * and the current time. + */ +static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) +{ + unsigned long next_time; + unsigned long now_time; + + next->tm_year = now->tm_year; + next->tm_mon = now->tm_mon; + next->tm_mday = now->tm_mday; + next->tm_hour = alrm->tm_hour; + next->tm_min = alrm->tm_min; + next->tm_sec = alrm->tm_sec; + + rtc_tm_to_time(now, &now_time); + rtc_tm_to_time(next, &next_time); + + if (next_time < now_time) { + /* Advance one day */ + next_time += 60 * 60 * 24; + rtc_time_to_tm(next_time, next); + } +} + static int rtc_update_alarm(struct rtc_time *alrm) { struct rtc_time alarm_tm, now_tm; diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index eaf55945f21b..7dcfba1bbfe1 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -71,6 +71,7 @@ #define X1205_SR_RTCF 0x01 /* Clock failure */ #define X1205_SR_WEL 0x02 /* Write Enable Latch */ #define X1205_SR_RWEL 0x04 /* Register Write Enable */ +#define X1205_SR_AL0 0x20 /* Alarm 0 match */ #define X1205_DTR_DTR0 0x01 #define X1205_DTR_DTR1 0x02 @@ -78,6 +79,8 @@ #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */ + static struct i2c_driver x1205_driver; /* @@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, unsigned char reg_base) { unsigned char dt_addr[2] = { 0, reg_base }; - unsigned char buf[8]; + int i; struct i2c_msg msgs[] = { { client->addr, 0, 2, dt_addr }, /* setup read ptr */ @@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, }; /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + /* Mask out the enable bits if these are alarm registers */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] &= 0x7F; + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); tm->tm_min = BCD2BIN(buf[CCR_MIN]); tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ @@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) }; /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) } static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) + int datetoo, u8 reg_base, unsigned char alm_enable) { - int i, xfer; + int i, xfer, nbytes; unsigned char buf[8]; + unsigned char rdata[10] = { 0, reg_base }; static const unsigned char wel[3] = { 0, X1205_REG_SR, X1205_SR_WEL }; @@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); } + /* If writing alarm registers, set compare bits on registers 0-4 */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] |= 0x80; + /* this sequence is required to unlock the chip */ if ((xfer = i2c_master_send(client, wel, 3)) != 3) { dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer); @@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, return -EIO; } + /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + if (datetoo) + nbytes = 8; + else + nbytes = 3; + for (i = 0; i < nbytes; i++) + rdata[2+i] = buf[i]; + + xfer = i2c_master_send(client, rdata, nbytes+2); + if (xfer != nbytes+2) { + dev_err(&client->dev, + "%s: result=%d addr=%02x, data=%02x\n", + __func__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + + /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/ + if (reg_base < X1205_CCR_BASE) { + unsigned char al0e[3] = { 0, X1205_REG_INT, 0 }; + + msleep(10); - xfer = i2c_master_send(client, rdata, 3); + /* ...and set or clear the AL0E bit in the INT register */ + + /* Need to set RWEL again as the write has cleared it */ + xfer = i2c_master_send(client, rwel, 3); if (xfer != 3) { dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", + "%s: aloe rwel - %d\n", __func__, - xfer, rdata[1], rdata[2]); + xfer); + return -EIO; + } + + if (alm_enable) + al0e[2] = X1205_INT_AL0E; + + xfer = i2c_master_send(client, al0e, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: al0e - %d\n", + __func__, + xfer); return -EIO; } - }; + + /* and wait 10msec again for this write to complete */ + msleep(10); + } /* disable further writes */ if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { @@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client) tm.tm_hour = tm.tm_min = tm.tm_sec = 0; - if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) - dev_err(&client->dev, - "unable to restart the oscillator\n"); + err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + if (err < 0) + dev_err(&client->dev, "unable to restart the oscillator\n"); return err; } @@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim) }; /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim) }; /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client) static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - return x1205_get_datetime(to_i2c_client(dev), - &alrm->time, X1205_ALM0_BASE); + int err; + unsigned char intreg, status; + static unsigned char int_addr[2] = { 0, X1205_REG_INT }; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_msg msgs[] = { + { client->addr, 0, 2, int_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */ + }; + + /* read interrupt register and status register */ + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { + dev_err(&client->dev, "%s: read error\n", __func__); + return -EIO; + } + err = x1205_get_status(client, &status); + if (err == 0) { + alrm->pending = (status & X1205_SR_AL0) ? 1 : 0; + alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0; + err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE); + } + return err; } static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { return x1205_set_datetime(to_i2c_client(dev), - &alrm->time, 1, X1205_ALM0_BASE); + &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled); } static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) { return x1205_set_datetime(to_i2c_client(dev), - tm, 1, X1205_CCR_BASE); + tm, 1, X1205_CCR_BASE, 0); } static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) |