diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 5 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1302.c | 85 | ||||
| -rw-r--r-- | drivers/rtc/rtc-isl1208.c | 45 | ||||
| -rw-r--r-- | drivers/rtc/rtc-mxc.c | 25 | ||||
| -rw-r--r-- | drivers/rtc/rtc-s3c.c | 107 | ||||
| -rw-r--r-- | drivers/rtc/rtc-wm831x.c | 16 |
7 files changed, 185 insertions, 100 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 50ac047cd136..f1598324344c 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -640,7 +640,7 @@ config RTC_DRV_OMAP config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help RTC (Realtime Clock) driver for the clock inbuilt into the Samsung S3C24XX series of SoCs. This can provide periodic diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 96e8e70fbf1e..11b8ea29d2b7 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -719,6 +719,9 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) } } + cmos_rtc.dev = dev; + dev_set_drvdata(dev, &cmos_rtc); + cmos_rtc.rtc = rtc_device_register(driver_name, dev, &cmos_rtc_ops, THIS_MODULE); if (IS_ERR(cmos_rtc.rtc)) { @@ -726,8 +729,6 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup0; } - cmos_rtc.dev = dev; - dev_set_drvdata(dev, &cmos_rtc); rename_region(ports, dev_name(&cmos_rtc.rtc->dev)); spin_lock_irq(&rtc_lock); diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c index 532acf9b05d8..359d1e04626c 100644 --- a/drivers/rtc/rtc-ds1302.c +++ b/drivers/rtc/rtc-ds1302.c @@ -16,7 +16,6 @@ #include <linux/rtc.h> #include <linux/io.h> #include <linux/bcd.h> -#include <asm/rtc.h> #define DRV_NAME "rtc-ds1302" #define DRV_VERSION "0.1.1" @@ -34,14 +33,55 @@ #define RTC_ADDR_MIN 0x01 /* Address of minute register */ #define RTC_ADDR_SEC 0x00 /* Address of second register */ +#ifdef CONFIG_SH_SECUREEDGE5410 +#include <asm/rtc.h> +#include <mach/snapgear.h> + #define RTC_RESET 0x1000 #define RTC_IODATA 0x0800 #define RTC_SCLK 0x0400 -#ifdef CONFIG_SH_SECUREEDGE5410 -#include <mach/snapgear.h> #define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) #define get_dp() SECUREEDGE_READ_IOPORT() +#define ds1302_set_tx() +#define ds1302_set_rx() + +static inline int ds1302_hw_init(void) +{ + return 0; +} + +static inline void ds1302_reset(void) +{ + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); +} + +static inline void ds1302_clock(void) +{ + set_dp(get_dp() | RTC_SCLK); /* clock high */ + set_dp(get_dp() & ~RTC_SCLK); /* clock low */ +} + +static inline void ds1302_start(void) +{ + set_dp(get_dp() | RTC_RESET); +} + +static inline void ds1302_stop(void) +{ + set_dp(get_dp() & ~RTC_RESET); +} + +static inline void ds1302_txbit(int bit) +{ + set_dp((get_dp() & ~RTC_IODATA) | (bit ? RTC_IODATA : 0)); +} + +static inline int ds1302_rxbit(void) +{ + return !!(get_dp() & RTC_IODATA); +} + #else #error "Add support for your platform" #endif @@ -50,11 +90,11 @@ static void ds1302_sendbits(unsigned int val) { int i; + ds1302_set_tx(); + for (i = 8; (i); i--, val >>= 1) { - set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? - RTC_IODATA : 0)); - set_dp(get_dp() | RTC_SCLK); /* clock high */ - set_dp(get_dp() & ~RTC_SCLK); /* clock low */ + ds1302_txbit(val & 0x1); + ds1302_clock(); } } @@ -63,10 +103,11 @@ static unsigned int ds1302_recvbits(void) unsigned int val; int i; + ds1302_set_rx(); + for (i = 0, val = 0; (i < 8); i++) { - val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); - set_dp(get_dp() | RTC_SCLK); /* clock high */ - set_dp(get_dp() & ~RTC_SCLK); /* clock low */ + val |= (ds1302_rxbit() << i); + ds1302_clock(); } return val; @@ -76,23 +117,24 @@ static unsigned int ds1302_readbyte(unsigned int addr) { unsigned int val; - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + ds1302_reset(); - set_dp(get_dp() | RTC_RESET); + ds1302_start(); ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); val = ds1302_recvbits(); - set_dp(get_dp() & ~RTC_RESET); + ds1302_stop(); return val; } static void ds1302_writebyte(unsigned int addr, unsigned int val) { - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - set_dp(get_dp() | RTC_RESET); + ds1302_reset(); + + ds1302_start(); ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); ds1302_sendbits(val); - set_dp(get_dp() & ~RTC_RESET); + ds1302_stop(); } static int ds1302_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -167,13 +209,20 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; + if (ds1302_hw_init()) { + dev_err(&pdev->dev, "Failed to init communication channel"); + return -EINVAL; + } + /* Reset */ - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + ds1302_reset(); /* Write a magic value to the DS1302 RAM, and see if it sticks. */ ds1302_writebyte(RTC_ADDR_RAM0, 0x42); - if (ds1302_readbyte(RTC_ADDR_RAM0) != 0x42) + if (ds1302_readbyte(RTC_ADDR_RAM0) != 0x42) { + dev_err(&pdev->dev, "Failed to probe"); return -ENODEV; + } rtc = rtc_device_register("ds1302", &pdev->dev, &ds1302_rtc_ops, THIS_MODULE); diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 054e05294af8..468200c38ecb 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -462,39 +462,16 @@ isl1208_sysfs_store_usr(struct device *dev, static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr, isl1208_sysfs_store_usr); -static int -isl1208_sysfs_register(struct device *dev) -{ - int err; - - err = device_create_file(dev, &dev_attr_atrim); - if (err) - return err; - - err = device_create_file(dev, &dev_attr_dtrim); - if (err) { - device_remove_file(dev, &dev_attr_atrim); - return err; - } - - err = device_create_file(dev, &dev_attr_usr); - if (err) { - device_remove_file(dev, &dev_attr_atrim); - device_remove_file(dev, &dev_attr_dtrim); - } - - return 0; -} - -static int -isl1208_sysfs_unregister(struct device *dev) -{ - device_remove_file(dev, &dev_attr_dtrim); - device_remove_file(dev, &dev_attr_atrim); - device_remove_file(dev, &dev_attr_usr); +static struct attribute *isl1208_rtc_attrs[] = { + &dev_attr_atrim.attr, + &dev_attr_dtrim.attr, + &dev_attr_usr.attr, + NULL +}; - return 0; -} +static const struct attribute_group isl1208_rtc_sysfs_files = { + .attrs = isl1208_rtc_attrs, +}; static int isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -529,7 +506,7 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id) dev_warn(&client->dev, "rtc power failure detected, " "please set clock.\n"); - rc = isl1208_sysfs_register(&client->dev); + rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files); if (rc) goto exit_unregister; @@ -546,7 +523,7 @@ isl1208_remove(struct i2c_client *client) { struct rtc_device *rtc = i2c_get_clientdata(client); - isl1208_sysfs_unregister(&client->dev); + sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files); rtc_device_unregister(rtc); return 0; diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c index d71fe61db1d6..25ec921db07c 100644 --- a/drivers/rtc/rtc-mxc.c +++ b/drivers/rtc/rtc-mxc.c @@ -379,7 +379,6 @@ static struct rtc_class_ops mxc_rtc_ops = { static int __init mxc_rtc_probe(struct platform_device *pdev) { - struct clk *clk; struct resource *res; struct rtc_device *rtc; struct rtc_plat_data *pdata = NULL; @@ -402,14 +401,15 @@ static int __init mxc_rtc_probe(struct platform_device *pdev) pdata->ioaddr = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - clk = clk_get(&pdev->dev, "ckil"); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); + pdata->clk = clk_get(&pdev->dev, "rtc"); + if (IS_ERR(pdata->clk)) { + dev_err(&pdev->dev, "unable to get clock!\n"); + ret = PTR_ERR(pdata->clk); goto exit_free_pdata; } - rate = clk_get_rate(clk); - clk_put(clk); + clk_enable(pdata->clk); + rate = clk_get_rate(pdata->clk); if (rate == 32768) reg = RTC_INPUT_CLK_32768HZ; @@ -420,7 +420,7 @@ static int __init mxc_rtc_probe(struct platform_device *pdev) else { dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate); ret = -EINVAL; - goto exit_free_pdata; + goto exit_put_clk; } reg |= RTC_ENABLE_BIT; @@ -428,18 +428,9 @@ static int __init mxc_rtc_probe(struct platform_device *pdev) if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) { dev_err(&pdev->dev, "hardware module can't be enabled!\n"); ret = -EIO; - goto exit_free_pdata; - } - - pdata->clk = clk_get(&pdev->dev, "rtc"); - if (IS_ERR(pdata->clk)) { - dev_err(&pdev->dev, "unable to get clock!\n"); - ret = PTR_ERR(pdata->clk); - goto exit_free_pdata; + goto exit_put_clk; } - clk_enable(pdata->clk); - rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 4969b6059c89..e5972b2c17b7 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -29,6 +29,11 @@ #include <asm/irq.h> #include <plat/regs-rtc.h> +enum s3c_cpu_type { + TYPE_S3C2410, + TYPE_S3C64XX, +}; + /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ @@ -37,6 +42,7 @@ static struct resource *s3c_rtc_mem; static void __iomem *s3c_rtc_base; static int s3c_rtc_alarmno = NO_IRQ; static int s3c_rtc_tickno = NO_IRQ; +static enum s3c_cpu_type s3c_rtc_cpu_type; static DEFINE_SPINLOCK(s3c_rtc_pie_lock); @@ -80,12 +86,25 @@ static int s3c_rtc_setpie(struct device *dev, int enabled) pr_debug("%s: pie=%d\n", __func__, enabled); spin_lock_irq(&s3c_rtc_pie_lock); - tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE; - if (enabled) - tmp |= S3C2410_TICNT_ENABLE; + if (s3c_rtc_cpu_type == TYPE_S3C64XX) { + tmp = readb(s3c_rtc_base + S3C2410_RTCCON); + tmp &= ~S3C64XX_RTCCON_TICEN; + + if (enabled) + tmp |= S3C64XX_RTCCON_TICEN; + + writeb(tmp, s3c_rtc_base + S3C2410_RTCCON); + } else { + tmp = readb(s3c_rtc_base + S3C2410_TICNT); + tmp &= ~S3C2410_TICNT_ENABLE; + + if (enabled) + tmp |= S3C2410_TICNT_ENABLE; + + writeb(tmp, s3c_rtc_base + S3C2410_TICNT); + } - writeb(tmp, s3c_rtc_base + S3C2410_TICNT); spin_unlock_irq(&s3c_rtc_pie_lock); return 0; @@ -93,15 +112,21 @@ static int s3c_rtc_setpie(struct device *dev, int enabled) static int s3c_rtc_setfreq(struct device *dev, int freq) { - unsigned int tmp; + struct platform_device *pdev = to_platform_device(dev); + struct rtc_device *rtc_dev = platform_get_drvdata(pdev); + unsigned int tmp = 0; if (!is_power_of_2(freq)) return -EINVAL; spin_lock_irq(&s3c_rtc_pie_lock); - tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE; - tmp |= (128 / freq)-1; + if (s3c_rtc_cpu_type == TYPE_S3C2410) { + tmp = readb(s3c_rtc_base + S3C2410_TICNT); + tmp &= S3C2410_TICNT_ENABLE; + } + + tmp |= (rtc_dev->max_user_freq / freq)-1; writeb(tmp, s3c_rtc_base + S3C2410_TICNT); spin_unlock_irq(&s3c_rtc_pie_lock); @@ -283,10 +308,17 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) static int s3c_rtc_proc(struct device *dev, struct seq_file *seq) { - unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT); + unsigned int ticnt; - seq_printf(seq, "periodic_IRQ\t: %s\n", - (ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" ); + if (s3c_rtc_cpu_type == TYPE_S3C64XX) { + ticnt = readb(s3c_rtc_base + S3C2410_RTCCON); + ticnt &= S3C64XX_RTCCON_TICEN; + } else { + ticnt = readb(s3c_rtc_base + S3C2410_TICNT); + ticnt &= S3C2410_TICNT_ENABLE; + } + + seq_printf(seq, "periodic_IRQ\t: %s\n", ticnt ? "yes" : "no"); return 0; } @@ -353,10 +385,16 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en) if (!en) { tmp = readb(base + S3C2410_RTCCON); - writeb(tmp & ~S3C2410_RTCCON_RTCEN, base + S3C2410_RTCCON); - - tmp = readb(base + S3C2410_TICNT); - writeb(tmp & ~S3C2410_TICNT_ENABLE, base + S3C2410_TICNT); + if (s3c_rtc_cpu_type == TYPE_S3C64XX) + tmp &= ~S3C64XX_RTCCON_TICEN; + tmp &= ~S3C2410_RTCCON_RTCEN; + writeb(tmp, base + S3C2410_RTCCON); + + if (s3c_rtc_cpu_type == TYPE_S3C2410) { + tmp = readb(base + S3C2410_TICNT); + tmp &= ~S3C2410_TICNT_ENABLE; + writeb(tmp, base + S3C2410_TICNT); + } } else { /* re-enable the device, and check it is ok */ @@ -472,7 +510,12 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) goto err_nortc; } - rtc->max_user_freq = 128; + if (s3c_rtc_cpu_type == TYPE_S3C64XX) + rtc->max_user_freq = 32768; + else + rtc->max_user_freq = 128; + + s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; platform_set_drvdata(pdev, rtc); return 0; @@ -492,20 +535,30 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) /* RTC Power management control */ -static int ticnt_save; +static int ticnt_save, ticnt_en_save; static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state) { /* save TICNT for anyone using periodic interrupts */ ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT); + if (s3c_rtc_cpu_type == TYPE_S3C64XX) { + ticnt_en_save = readb(s3c_rtc_base + S3C2410_RTCCON); + ticnt_en_save &= S3C64XX_RTCCON_TICEN; + } s3c_rtc_enable(pdev, 0); return 0; } static int s3c_rtc_resume(struct platform_device *pdev) { + unsigned int tmp; + s3c_rtc_enable(pdev, 1); writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT); + if (s3c_rtc_cpu_type == TYPE_S3C64XX && ticnt_en_save) { + tmp = readb(s3c_rtc_base + S3C2410_RTCCON); + writeb(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON); + } return 0; } #else @@ -513,13 +566,27 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif -static struct platform_driver s3c2410_rtc_driver = { +static struct platform_device_id s3c_rtc_driver_ids[] = { + { + .name = "s3c2410-rtc", + .driver_data = TYPE_S3C2410, + }, { + .name = "s3c64xx-rtc", + .driver_data = TYPE_S3C64XX, + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, s3c_rtc_driver_ids); + +static struct platform_driver s3c_rtc_driver = { .probe = s3c_rtc_probe, .remove = __devexit_p(s3c_rtc_remove), .suspend = s3c_rtc_suspend, .resume = s3c_rtc_resume, + .id_table = s3c_rtc_driver_ids, .driver = { - .name = "s3c2410-rtc", + .name = "s3c-rtc", .owner = THIS_MODULE, }, }; @@ -529,12 +596,12 @@ static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics static int __init s3c_rtc_init(void) { printk(banner); - return platform_driver_register(&s3c2410_rtc_driver); + return platform_driver_register(&s3c_rtc_driver); } static void __exit s3c_rtc_exit(void) { - platform_driver_unregister(&s3c2410_rtc_driver); + platform_driver_unregister(&s3c_rtc_driver); } module_init(s3c_rtc_init); diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c index b16cfe57a484..82931dc65c0b 100644 --- a/drivers/rtc/rtc-wm831x.c +++ b/drivers/rtc/rtc-wm831x.c @@ -449,17 +449,17 @@ static int wm831x_rtc_probe(struct platform_device *pdev) goto err; } - ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq, - IRQF_TRIGGER_RISING, "wm831x_rtc_per", - wm831x_rtc); + ret = request_threaded_irq(per_irq, NULL, wm831x_per_irq, + IRQF_TRIGGER_RISING, "RTC period", + wm831x_rtc); if (ret != 0) { dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n", per_irq, ret); } - ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq, - IRQF_TRIGGER_RISING, "wm831x_rtc_alm", - wm831x_rtc); + ret = request_threaded_irq(alm_irq, NULL, wm831x_alm_irq, + IRQF_TRIGGER_RISING, "RTC alarm", + wm831x_rtc); if (ret != 0) { dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n", alm_irq, ret); @@ -478,8 +478,8 @@ static int __devexit wm831x_rtc_remove(struct platform_device *pdev) int per_irq = platform_get_irq_byname(pdev, "PER"); int alm_irq = platform_get_irq_byname(pdev, "ALM"); - wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc); - wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc); + free_irq(alm_irq, wm831x_rtc); + free_irq(per_irq, wm831x_rtc); rtc_device_unregister(wm831x_rtc->rtc); kfree(wm831x_rtc); |